Search Results

Search found 5853 results on 235 pages for 'vivian short'.

Page 91/235 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • How do you explain ethernet cable problems to non networking people?

    - by Bryan McLemore
    We've recently been doing a large network migration in our datacenter. We've had a few cables in this start to deliver really bad pings (in excess of 500ms on a LAN) before they could be replaced. The cables we were replacing weren't made the best. They where all hand made and the runs were so short on some of them that the bend radius was definitely too tight. Some of them ran in bundles right in front of the heat exhaust of the power supplies. The cables were running ok until we started pulling the ones surrounding them out. Then a few started having the problem I mentioned above degrading performance and causing reliability issues. I'm trying to figure out the best way to explain this to non networking people. Is there any documentation that people could recommend or other methods?

    Read the article

  • Symlink across local volumes in webroot?

    - by geerlingguy
    I am looking for a good short-term solution to storage space concerns on my website. Currently, I have all uploaded files (flash video, images, etc.) inside the 'files' directory in my web root (/home/account/public_html/files). That directory is located on my high-speed main hard drive (a 15k SCSI drive). I have another drive with much more capacity, but spinning at 10k rpm (so still fast, but not as good for random reads/writes as the main drive. The entire drive is mounted at /backup Right now I'm just using it as a backup volume. I would like to create a symlink from my /home/account/public_html/files folder to /backup/files, and have all files reside on the second drive. However, if someone accesses a file at http://www.example.com/files/filename.jpg, would it still work if I symlinked to the second drive? (Basically, would Apache/PHP automatically know to follow the symlink for that directory?).

    Read the article

  • How to sync passwords one-way between windows domains without trust relationship?

    - by Franco C.
    We're migrating from Windows 2003 to 2008 SBS. We will run concurrently for a short period of time. I cannot establish a trust relationship between Server 2003 & Server 2008 SBS and I would like to know if there is a way to sync the passwords between 2003-2008? For example, I would like to dump the pre-encrypted passswords to a file in 2003 and then use this to update the passwords for the correspoding usernames in 2008 SBS. Is this possible? I have no need to ever see the clear text version of the passwords. I see one commercial product, but it hardly seems worth it given the temporary nature of my project... Thanks, Franco

    Read the article

  • Why does my laptop shut down, does it get too hot?

    - by Kevin P.
    When I play games, or use powerful-applications such as Autodesk Maya, my laptop just shuts down, ofcourse without any warning at all. This is what I've tried so far: Cleaned my fan, completely! Checked if I have enough RAM and good enough graphics card, and I do. (6 GB RAM, Nvidia GeForce GT540M with 2 GB VRAM) None of these options worked. Even tried to clean my fan twice! Now, I have some options I could also try, but I don't know if that have anything to do with it or not. I was thinking reinstalling my Windows 7, because maybe it has to do something wrong with the installation? My laptop is about a year old, and this problem just happend out of no where, short after I downgraded from Windows 8 Release Preview to my original Windows 7.

    Read the article

  • Laptop GPU apparently blew up, motherboard doesn't even turn on its power LED. [But..]

    - by leladax
    If I take out the GPU, the motherboard LED turns on but then [if it attempts to power up and boot] it turns off after 2 seconds [fans turn on normally in that short period]. [Without the GPUs out there's not even an attempt to boot.] It's an SLI motherboard for a toshiba (model X200-219). If I take out one of the GPUs (they are on top of each other) it surprisingly lets the motherboard turn on too (as it is if both are out) but it still turns off after 2-3 seconds, same behavior. I wonder if it's the GPU that produces the 'turn off after being on' behavior and not something else. [Has anyone seen this behavior with blown up GPUs or could it be something else?]

    Read the article

  • How do I make a Minecraft kiosk for portable USB drive that boots on most computers

    - by user2044589
    Some time ago, someone referred me to a cool website called Rapid Rollout. It worked fine until I tried to install an OS onto a netbook. To put it short, it didn't work as well as I expected it to. It also didn't install USB flash drives. I'm trying to build a system (or use a service that would create a system) that would open up the Minecraft Launcher (jar) and show it in full-screen with no background. It would also all have to fit into 8 Gigabytes (as this is the most that I can use right now). How can I accomplish this?

    Read the article

  • My Jtable is blank

    - by mazin
    Hello my q is about a jtable that i have ,i fill it with components from a .txt ,I have a main (menu ) JFrame and by pressing a jbutton i want the jtable to pop out ! My problem is that my jtable is blank and it supposed to show some date !I would appreciated any help , Thanks. this is my ''reading'' class` public static void main(String[] args) { company Company=new company(); payFrame jframe=new payFrame(Company); jframe.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE); jframe.setSize(600,300); jframe.setVisible(true); readClass(); } //diavasma public static void readClass(){ ArrayList<Employee> emp =new ArrayList<Employee>() ; //Employee[] emp=new Employee[7]; //read from file try { int i=0; // int rowCounter; // int payments=0; String inputDocument = ("src/Employees.txt"); FileInputStream is = new FileInputStream(inputDocument); Reader iD = new InputStreamReader(is); BufferedReader buf = new BufferedReader(iD); String inputLine; while ((inputLine = buf.readLine()) != null) { String[] lineParts = inputLine.split(","); String email = (lineParts[7]); int EmpNo = Integer.parseInt(lineParts[0]); String type = lineParts[10]; int PostalCode = Integer.parseInt(lineParts[5]); int phone = Integer.parseInt(lineParts[6]); int DeptNo = (short) Integer.parseInt(lineParts[8]); double Salary; int card = (short) Integer.parseInt(lineParts[10]); int emptype = 0; int hours=Integer.parseInt(lineParts[11]); if (type.equals("FULL TIME")) { emptype = 1; } else if (type.equals("SELLER")) { emptype = 2; } else { emptype = 3; } /** * Creates employee instances depending on their type of employment * (fulltime=1, salesman=2, parttime=3) */ switch (emptype) { case 1: Salary = Double.parseDouble(lineParts[10]); emp.add(new FullTime(lineParts[1], lineParts[2], EmpNo, lineParts[3], lineParts[4], PostalCode, phone, email, DeptNo, card, Salary,hours, type)); i++; break; and this is my class where i make my Jtable and fill him public class company extends JFrame { private ArrayList<Employee> emp = new ArrayList<Employee>(); public void addEmployee(Employee emplo) { emp.add(emplo); } public ArrayList<Employee> getArray() { return emp; } public void getOption1() { ArrayList<Employee> employee = getArray(); JTable table = new JTable(); DefaultTableModel model = new DefaultTableModel(); table.setModel(model); model.setColumnIdentifiers(new String[]{"Code", "First Name", "Last Name", "Address", "City", "Postal Code", "Phone", "Email", "Dept Code", "Salary", "Time Card", "Hours"}); for (Employee current : employee) { model.addRow(new Object[]{current.getempCode(), current.getfirst(), current.getlast(), current.getaddress(), current.getcity(), current.getpostalCode(), current.gettelephone(), current.getemail(), current.getdep(), current.getsalary(), current.getcardcode(), current.getHours() }); } table.setPreferredScrollableViewportSize(new Dimension(500, 50)); table.setFillsViewportHeight(true); JScrollPane scrollPane = new JScrollPane(table); add(scrollPane); setVisible(true); table.revalidate();

    Read the article

  • LSB Script: how do i know if something goes wrong?

    - by ianaz
    How do I know if a LSB script fails to load or where do I check the log of the lsbs scripts? I added two scripts with the following command: update-rc.d scriptname defaults And just one launches the things I need. It does not seem to be a script error since if I launch it with /etc/init.d/scriptname it works. This is my script: #!/bin/bash ### BEGIN INIT INFO # Provides: nodes # Required-Start: $remote_fs $syslog # Required-Stop: $remote_fs $syslog # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: Starts all node apps # Description: Starts all node apps like AAM, AMT,... ### END INIT INFO echo "Launch Node applications with forever" export PATH=/usr/local/bin:$PATH # Starts the redis server redis-server # Starts AAM forever -o /var/log/AAM.log -e /var/log/AAM.log --spinSleepTime 2000 -m 5 start /var/nodejs/AAM/app.js

    Read the article

  • Best Server Ghost-Like Tool For Windows

    - by John Dibling
    I'm looking for advice on which tool we should use to clone servers. In the short term, we will be cloning identical hardware but in the long run we may want to create one image and replicate that on a different class of machine. For example, as new servers are released from Dell, we will want to continue to use the same image we already made. Right now our servers are Windows (Server 2008 & Server 2008 R2), but moving forward we may need Linux support as well. Ghost Solution Suite 2.5 seems to be the canonical tool. Are there alternatives? Recommendations/reviews?

    Read the article

  • I want to make an item on a Windows 7 Jump List run as administrator

    - by ProfKaos
    Only occasionally I have to open a Visual Studio project with a VS instance running under admin. This is a little inconvenient because I can't use the short-cut for that project in the VS Jump List. How can I modify the Jump List entry to force VS to open that project running as admin? Please note that I'm not trying to avoid providing admin auth to do this. I'm just trying to avoid having to run VS as admin, and then having to open the project from within VS once it opens.

    Read the article

  • What could cause a flurry of Microsoft-Windows-Servicing events?

    - by MattUebel
    I have a windows 2k8 machine that generated almost 40,000 WinEventLog:System events in the period of about 20 minutes. The breakdown of these events by eventcode was approximately: 4373 46% 4371 46% 4383 7% 4372 1% Microsoft-Windows-Servicing seemed to go crazy for a short time.... looking at updates, changing the state of updates etc. What could have caused this? UPDATE: Many of the events seem to come in pairs of: Windows Servicing started a process of changing package KBfoobar state from Installed(Installed) to Installed(Installed) and Windows Servicing successfully set package KBfoobar state to Installed(Intstalled)

    Read the article

  • further troubleshooting on a p8z77 motherboard

    - by Journeyman Geek
    I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

    Read the article

  • Maximum burn speed keeps decreasing from Nero?

    - by Bob King
    I have a 16x DL DVD burner in my work machine (XP SP3). I'm using 8x TDK DVD+R media. The first dozen or so disks burned fine using Nero, but after that I started to coaster every disk. I asked Nero to calculate the maximum speed, and it calculated it at 4x. This worked for a few disks, then the same issues. I'm currently burning at 1.2x. I've since tried other brands and full 16x compatible disks, I can't get my burn speed to be recognized as any faster than what it's currently at. I've tried uninstalling Nero. I've tried burning directly in Windows, and also tested an MP3 CD in iTunes, and no luck. Any suggestions, short of reinstalling Windows, would be great!

    Read the article

  • USB port causing device problems after new motherboard upgrade

    - by enbuyukfener
    I'm looking into a PC with an issue with one of the front USB ports (perhaps both). It was working before a motherboard upgrade but since then, a USB drive was inserted, overheated and does not appear to be working. Then a phone (with USB charging) was plugged in, and the phone OS suspended. Removing and re-inserting the battery led to the phone (and hence battery) working, however the battery no longer charges (including with a wall charger). It seems too much to be a coincidence and am wondering what the issue may be? Ideas so far are short circuiting, or over-current to the USB ports. Note: Did not occur to me, so details are not 100% accurate or complete. Feel free to ask for missing info that I may have forgotten though.

    Read the article

  • How long until the chirping stops or what can I do to make it stop?

    - by MadBurn
    I know computers, I have been fixing them and building them for over a decade... but I don't know the exact electronics of them. My personal desktop PC is making an irregular, but constant, extremely high pitched chirping noise. I know this could be my hard drive, but I've heard that noise before and I believe this is a capacitor or part of the electronics. This noise is right at the edge of my hearing and I can feel it more than I can hear it. After a while, it starts to give me a headache and makes me physically sick. How long will this last? Is there anything I can do to fix it (short of replacing the entire motherboard)?

    Read the article

  • Windows 7 boot order and locations

    - by Russ C
    Hi, Long story short, a program that shouldn't have been run on this machine has been, and it's created a naughty .sys file that is being loaded right after pci.sys (as determined by NBTLog.txt) I've had a look a BCDEdit, EasyBCD and a number of Registry keys but I can't seem to determine where about winstart.exe actually gets the list of sys files to load from! The sys file itself is running in high elevation and appears to be defeating all attempts to remove it; I could (probably should) make a Linux USB boot disc and use it to delete the sys file, but I'd really appreciate understanding the mechanics here. ((FWIW: the problem stemmed from a sibling running a Trainer for some game; he has been suitable chastised))

    Read the article

  • Unable to do Port Forwarding in Virtual Box

    - by dewbot
    I'm using Mac OS X 10.6. I have installed Virtual Box 4.1.0 in it. My Guest OS is Ubuntu Server 11.04. I have added a rule in Port Forwarding in Virtual Box - "guestssh" TCP 127.0.1.1 8080 127.0.0.1 1337 Inside Guest OS I'm running nodejs server. Code is nothing but simple helloworld code found on their site http://nodejs.org/. In short I'm running server on 127.0.0.1 on 1337 Port. Now according to rule I have given, from Host Machine all the requests for 127.0.1.1:8080 should be forwarded to 127.0.0.1:1337 of Guest OS. From Host I'm doing curl http://127.0.1.1:8080 and I'm getting curl: (7) couldn't connect to host Is there something am I doing wrong? Note- Don't give me suggestion to do ssh n all. As my ISP does not provide Internal LAN so its not possible in my case. All I can do it Port Forwarding.

    Read the article

  • How to run a script in Ubuntu via SSH as superuser?

    - by Irinotecan
    So I have a script that needs to be executed remotely as root. This isn't a problem with most Linux distros since they have a root account. But since Ubuntu does not, executing anything as root requires a 2-step process of entering the account password twice - once to log in and once for sudo. The SSH process to launch the script is automated, so it cannot pause for user input for the second password request. Does anyone know, short of hacking Ubuntu to re-enable root (not an option), if unattended SSH script execution with superuser privilege on the target machine is possible? Also, having no experience with Debian, does Debian behave this way too?

    Read the article

  • How to add a service to the S runlevel in Debian?

    - by MasterM
    I have the following script (what it does exactly is not important): #!/bin/sh -e ### BEGIN INIT INFO # Provides: watchdog_early # Required-Start: udev # Required-Stop: # Default-Start: S # Default-Stop: # X-Interactive: true # Short-Description: Start watchdog early. ### END INIT INFO # Do stuff here... I insert it into the S runlevel by invoking: insserv watchdog_early The aproriate link is created in /etc/rcS.d: S04watchdog_early -> ../init.d/watchdog_early and /etc/init.d/watchdog_early is executable (has mode 755). Despite all this, it is NOT being run at boot. Why?

    Read the article

  • Cutting up videos (excerpting) on Mac OS X -- iMovie produces super-large files

    - by markvgti
    I need to cut out parts of a video (+ the associated audio, of course) to make a short clip. For example, take 2 minutes from one location, 3 minutes from another part of the video, 30 seconds from another location and join it all together to form one single clip. The format of the input video is mp4 (H.264 encoding, AFAICR). Don't need very sophisticated merges or transitions from one part to the next, or sophisticated banners (text) on-screen, but some ability to do so would be a plus point. I've done this with iMovie in the past, but where the original file was under 5MB/min of play time, the chopped-up version was over 11MB/min of play time, which to me seems really bad. Is there a better/different way of doing this on OS X? Looking for free (gratis) solutions. OS: OS X 10.9.3

    Read the article

  • Synckolab will not start automatically

    - by EBV2010
    We have a Kolab server for e-mail, calendar and contacts with Thunderbird for a client. The add-ons are Lightning and Synckolab. The workstations are Kubuntu, most 10.04, some 11.10. It basically works but for one nagging problem: the automatic sync (that is, the settings that starts Synckolab upon start of Thunderbird and every x minutes as per setting) does not fire. We went through the whole routine: setting it, setting it to zero and back to any number of minutes, stopping/starting Thunderbird or the entire computer to make sure it sees and sets it. In the configuration console is reflects the changes. But still it will not automatically fire Synckolab. Manual syncs work without any problem (none that we've seen - it reflects all the added, changed etc calendar events). In short: Synckolab does not fire automatically with any setting who have thought of.

    Read the article

  • Pages partially load on rapid refresh

    - by user101570
    I recently set up a VPS slice with 256MB to run a LAMP stack (Ubuntu 11.04, Apache2, Mysql, PHP5). So far I'm only running a simple Wordpress site on an IP-based virtual host I set up. The performance is excellent, but I've noticed that if I send multiple HTTP requests from the same IP in a short time period, only partial pages are rendered. Then if I wait a bit and refresh the page, the entire page loads again. I noticed this behaviour when accessing the site from two browsers from my office desktop, but it also presents itself if I quickly navigate the site from a single browser (any browser). I'm guessing this is an Apache phenomenon, as the pages are rendered correctly except under the conditions above, but perhaps I'm wrong here. Could it be my hosting company with some kind of DOS protection in place? As a relative Linux/server noob, I'd really appreciate any insight into what settings in Apache could explain this behaviour, and how I might go about changing it.

    Read the article

  • HP Pavillion dv6 laptop - 15 beeps on startup and a black screen?

    - by dunc
    Usual story - girlfriend's step-brother's laptop is broken. I don't know a huge amount about what occurred before it broke, but I do know the following: When you try to turn the laptop on, it beeps 15 times exactly. The screen remains black. The LED on the Caps Lock key flashes continuously. If left on, the laptop never boots - as far as I can see. If left on, on a stable surface with decent ventilation for a relatively short period of time, the laptop (below keyboard, but not where the RAM/HDD are) gets very hot. I've tried doing what most websites appear to recommend for similar problems, which is to disconnect AC and battery then hold the power button down for a minute before reconnecting the AC and trying to turn the laptop on - no difference. EDIT I've also tried re-seating the RAM, to no avail. Any ideas? Thanks in advance,

    Read the article

  • Ubuntu 12.10 sources.list empty after install

    - by Martin Nielsen
    I recently installed the Ubuntu 12.10 server version from a USB stick. The step "Install additional software" or whatever keeps failing, so i though screw it and continued. Everything else worked like a charm. I thought. Turns out, the only two entries in my sources.list are the install CD. This means that i have no way of getting a.. well.. anything installed. Can someone give me a short list of repositories that i need so i can put them in the file? And on a similar note: What is the comment character for the sources list? #?

    Read the article

  • Redirect traffic to local address so iOS speedtest app measures LAN speed

    - by ivan_sig
    I have mounted a Speedtest Mini server on a local LAMP, so I can test my LAN speeds effortlessly just by opening the URL with a Flash enabled web browser, the thing is, I want my iOS and Android devices to test with the LAN server too, not with the WAN, as I'm trying to measure LAN-Only performance. Is there a way so I can redirect the traffic intended to an specific external IP (The one of the real server) to my local server?. I know the servers IP as a short Wireshark analysis gave me the data, but still searching for a way to make that redirect. I have Jailbreak and root on my devices, so playing with system files is not a problem. I've tried mounting a proxy and making redirects by the hosts file and domain names, but it looks like Ookla's app relies on IP address only.

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >