Search Results

Search found 10745 results on 430 pages for 'anoyon 12'.

Page 92/430 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• If-Modified-Since vs If-None-Match

  - by Roger

  This question is based on this article response header HTTP/1.1 200 OK Last-Modified: Tue, 12 Dec 2006 03:03:59 GMT ETag: "10c24bc-4ab-457e1c1f" Content-Length: 12195 request header GET /i/yahoo.gif HTTP/1.1 Host: us.yimg.com If-Modified-Since: Tue, 12 Dec 2006 03:03:59 GMT If-None-Match: "10c24bc-4ab-457e1c1f" HTTP/1.1 304 Not Modified In this case browser is sending both If-None-Match and If-Modified-Since. My question is on the server side do I need to match BOTH etag and If-Modified-Since before I send 304. Or Should I just look at etag and send 304 if etag is a match. In this case I am ignoring If-Modified-Since .

  Read the article

• Failed MDADM Array With Ext.4 Partition - "e2fsck: unable to set superblock flags on /dev/md0"

  - by Matthew Hodgkins

  Had a power failure and now my mdadm array is having problems. sudo mdadm -D /dev/md0 [hodge@hodge-fs ~]$ sudo mdadm -D /dev/md0 /dev/md0: Version : 0.90 Creation Time : Sun Apr 25 01:39:25 2010 Raid Level : raid5 Array Size : 8790815232 (8383.57 GiB 9001.79 GB) Used Dev Size : 1465135872 (1397.26 GiB 1500.30 GB) Raid Devices : 7 Total Devices : 7 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Sat Aug 7 19:10:28 2010 State : clean, degraded, recovering Active Devices : 6 Working Devices : 7 Failed Devices : 0 Spare Devices : 1 Layout : left-symmetric Chunk Size : 128K Rebuild Status : 10% complete UUID : 44a8f730:b9bea6ea:3a28392c:12b22235 (local to host hodge-fs) Events : 0.1307608 Number Major Minor RaidDevice State 0 8 81 0 active sync /dev/sdf1 1 8 97 1 active sync /dev/sdg1 2 8 113 2 active sync /dev/sdh1 3 8 65 3 active sync /dev/sde1 4 8 49 4 active sync /dev/sdd1 7 8 33 5 spare rebuilding /dev/sdc1 6 8 16 6 active sync /dev/sdb sudo mount -a [hodge@hodge-fs ~]$ sudo mount -a mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so sudo fsck.ext4 /dev/md0 [hodge@hodge-fs ~]$ sudo fsck.ext4 /dev/md0 e2fsck 1.41.12 (17-May-2010) fsck.ext4: Group descriptors look bad... trying backup blocks... /dev/md0: recovering journal fsck.ext4: unable to set superblock flags on /dev/md0 sudo dumpe2fs /dev/md0 | grep -i superblock [hodge@hodge-fs ~]$ sudo dumpe2fs /dev/md0 | grep -i superblock dumpe2fs 1.41.12 (17-May-2010) Primary superblock at 0, Group descriptors at 1-524 Backup superblock at 32768, Group descriptors at 32769-33292 Backup superblock at 98304, Group descriptors at 98305-98828 Backup superblock at 163840, Group descriptors at 163841-164364 Backup superblock at 229376, Group descriptors at 229377-229900 Backup superblock at 294912, Group descriptors at 294913-295436 Backup superblock at 819200, Group descriptors at 819201-819724 Backup superblock at 884736, Group descriptors at 884737-885260 Backup superblock at 1605632, Group descriptors at 1605633-1606156 Backup superblock at 2654208, Group descriptors at 2654209-2654732 Backup superblock at 4096000, Group descriptors at 4096001-4096524 Backup superblock at 7962624, Group descriptors at 7962625-7963148 Backup superblock at 11239424, Group descriptors at 11239425-11239948 Backup superblock at 20480000, Group descriptors at 20480001-20480524 Backup superblock at 23887872, Group descriptors at 23887873-23888396 Backup superblock at 71663616, Group descriptors at 71663617-71664140 Backup superblock at 78675968, Group descriptors at 78675969-78676492 Backup superblock at 102400000, Group descriptors at 102400001-102400524 Backup superblock at 214990848, Group descriptors at 214990849-214991372 Backup superblock at 512000000, Group descriptors at 512000001-512000524 Backup superblock at 550731776, Group descriptors at 550731777-550732300 Backup superblock at 644972544, Group descriptors at 644972545-644973068 Backup superblock at 1934917632, Group descriptors at 1934917633-1934918156 sudo e2fsck -b 32768 /dev/md0 [hodge@hodge-fs ~]$ sudo e2fsck -b 32768 /dev/md0 e2fsck 1.41.12 (17-May-2010) /dev/md0: recovering journal e2fsck: unable to set superblock flags on /dev/md0 sudo dmesg | tail [hodge@hodge-fs ~]$ sudo dmesg | tail EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! EXT4-fs (md0): ext4_check_descriptors: Checksum for group 0 failed (59837!=29115) EXT4-fs (md0): group descriptors corrupted! Please Help!!!

  Read the article

• Why can blocked IPs get through my iptables? What's wrong with this configuration?

  - by NeedSomeHelp

  (Why can/How are) blocked IPs (get/getting) through my iptables? Hello and thanks for your consideration... I have configured iptables and included (below) output from the command "iptables --line-numbers -n -L" yet IP addresses (like 31.41.219.180) from IP blocks I have already blocked are getting through. Please take a look and share any input you may have. Thank you. P.S. The initial ACCEPT IP addresses are for CloudFlare. . Chain INPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 32267 14M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 149 8570 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 5 0 0 ACCEPT udp -- * * 103.21.244.0/22 0.0.0.0/0 6 0 0 ACCEPT udp -- * * 103.22.200.0/22 0.0.0.0/0 7 0 0 ACCEPT udp -- * * 103.31.4.0/22 0.0.0.0/0 8 0 0 ACCEPT udp -- * * 104.16.0.0/12 0.0.0.0/0 9 0 0 ACCEPT udp -- * * 108.162.192.0/18 0.0.0.0/0 10 0 0 ACCEPT udp -- * * 141.101.64.0/18 0.0.0.0/0 11 0 0 ACCEPT udp -- * * 162.158.0.0/15 0.0.0.0/0 12 0 0 ACCEPT udp -- * * 173.245.48.0/20 0.0.0.0/0 13 0 0 ACCEPT udp -- * * 188.114.96.0/20 0.0.0.0/0 14 0 0 ACCEPT udp -- * * 190.93.240.0/20 0.0.0.0/0 15 0 0 ACCEPT udp -- * * 197.234.240.0/22 0.0.0.0/0 16 0 0 ACCEPT udp -- * * 198.41.128.0/17 0.0.0.0/0 17 0 0 ACCEPT udp -- * * 199.27.128.0/21 0.0.0.0/0 18 0 0 ACCEPT tcp -- * * 103.21.244.0/22 0.0.0.0/0 19 9 468 ACCEPT tcp -- * * 103.22.200.0/22 0.0.0.0/0 20 0 0 ACCEPT tcp -- * * 103.31.4.0/22 0.0.0.0/0 21 0 0 ACCEPT tcp -- * * 104.16.0.0/12 0.0.0.0/0 22 858 44616 ACCEPT tcp -- * * 108.162.192.0/18 0.0.0.0/0 23 376 19552 ACCEPT tcp -- * * 141.101.64.0/18 0.0.0.0/0 24 0 0 ACCEPT tcp -- * * 162.158.0.0/15 0.0.0.0/0 25 257 13364 ACCEPT tcp -- * * 173.245.48.0/20 0.0.0.0/0 26 0 0 ACCEPT tcp -- * * 188.114.96.0/20 0.0.0.0/0 27 0 0 ACCEPT tcp -- * * 190.93.240.0/20 0.0.0.0/0 28 0 0 ACCEPT tcp -- * * 197.234.240.0/22 0.0.0.0/0 29 0 0 ACCEPT tcp -- * * 198.41.128.0/17 0.0.0.0/0 30 92 4784 ACCEPT tcp -- * * 199.27.128.0/21 0.0.0.0/0 31 0 0 DROP tcp -- * * 1.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 32 0 0 DROP tcp -- * * 101.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 33 0 0 DROP tcp -- * * 102.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 34 0 0 DROP tcp -- * * 103.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 35 18 1080 DROP tcp -- * * 109.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 36 0 0 DROP tcp -- * * 112.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 37 12 656 DROP tcp -- * * 113.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 38 0 0 DROP tcp -- * * 114.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 39 0 0 DROP tcp -- * * 115.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 40 8 352 DROP tcp -- * * 116.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 41 0 0 DROP tcp -- * * 117.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 42 0 0 DROP tcp -- * * 118.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 43 2 120 DROP tcp -- * * 119.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 44 0 0 DROP tcp -- * * 120.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 45 0 0 DROP tcp -- * * 121.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 46 4 160 DROP tcp -- * * 122.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 47 4 240 DROP tcp -- * * 123.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 48 0 0 DROP tcp -- * * 125.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 49 0 0 DROP tcp -- * * 134.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 50 0 0 DROP tcp -- * * 146.185.0.0/16 0.0.0.0/0 tcp dpts:1:50000 51 6 360 DROP tcp -- * * 148.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 52 0 0 DROP tcp -- * * 151.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 53 0 0 DROP tcp -- * * 175.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 54 0 0 DROP tcp -- * * 176.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 55 0 0 DROP tcp -- * * 177.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 56 46 2696 DROP tcp -- * * 178.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 57 0 0 DROP tcp -- * * 179.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 58 4 224 DROP tcp -- * * 180.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 59 0 0 DROP tcp -- * * 181.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 60 0 0 DROP tcp -- * * 182.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 61 34 2040 DROP tcp -- * * 183.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 62 0 0 DROP tcp -- * * 185.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 63 0 0 DROP tcp -- * * 186.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 64 0 0 DROP tcp -- * * 187.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 65 18 912 DROP tcp -- * * 188.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 66 0 0 DROP tcp -- * * 189.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 67 0 0 DROP tcp -- * * 190.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 68 2 120 DROP tcp -- * * 192.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 69 0 0 DROP tcp -- * * 196.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 70 0 0 DROP tcp -- * * 197.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 71 5 300 DROP tcp -- * * 198.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 72 0 0 DROP tcp -- * * 2.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 73 0 0 DROP tcp -- * * 200.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 74 0 0 DROP tcp -- * * 201.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 75 6 360 DROP tcp -- * * 202.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 76 0 0 DROP tcp -- * * 203.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 77 4 160 DROP tcp -- * * 210.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 78 0 0 DROP tcp -- * * 211.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 79 2 96 DROP tcp -- * * 212.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 80 4 240 DROP tcp -- * * 213.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 81 0 0 DROP tcp -- * * 214.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 82 0 0 DROP tcp -- * * 215.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 83 0 0 DROP tcp -- * * 216.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 84 0 0 DROP tcp -- * * 217.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 85 4 172 DROP tcp -- * * 218.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 86 12 576 DROP tcp -- * * 219.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 87 7 372 DROP tcp -- * * 220.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 88 0 0 DROP tcp -- * * 222.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 89 0 0 DROP tcp -- * * 27.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 90 12 608 DROP tcp -- * * 31.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 91 11 528 DROP tcp -- * * 37.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 92 0 0 DROP tcp -- * * 41.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 93 0 0 DROP tcp -- * * 42.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 94 0 0 DROP tcp -- * * 43.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 95 8 480 DROP tcp -- * * 46.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 96 0 0 DROP tcp -- * * 49.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 97 6 360 DROP tcp -- * * 5.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 98 0 0 DROP tcp -- * * 58.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 99 0 0 DROP tcp -- * * 60.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 100 4 160 DROP tcp -- * * 61.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 101 32 1848 DROP tcp -- * * 62.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 102 0 0 DROP tcp -- * * 63.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 103 20 1200 DROP tcp -- * * 64.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 104 0 0 DROP tcp -- * * 65.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 105 266 15960 DROP tcp -- * * 66.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 106 3 180 DROP tcp -- * * 69.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 107 5 272 DROP tcp -- * * 72.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 108 0 0 DROP tcp -- * * 78.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 109 0 0 DROP tcp -- * * 81.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 110 3 180 DROP tcp -- * * 82.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 111 0 0 DROP tcp -- * * 83.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 112 8 384 DROP tcp -- * * 84.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 113 0 0 DROP tcp -- * * 85.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 114 0 0 DROP tcp -- * * 86.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 115 6 360 DROP tcp -- * * 87.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 116 7 408 DROP tcp -- * * 88.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 117 0 0 DROP tcp -- * * 89.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 118 0 0 DROP tcp -- * * 90.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 119 0 0 DROP tcp -- * * 91.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 120 3 152 DROP tcp -- * * 92.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 121 20 992 DROP tcp -- * * 93.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 122 9 512 DROP tcp -- * * 94.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 123 5 272 DROP tcp -- * * 95.0.0.0/8 0.0.0.0/0 tcp dpts:1:50000 124 0 0 DROP udp -- * * 1.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 125 0 0 DROP udp -- * * 101.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 126 0 0 DROP udp -- * * 102.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 127 0 0 DROP udp -- * * 103.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 128 0 0 DROP udp -- * * 109.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 129 0 0 DROP udp -- * * 112.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 130 0 0 DROP udp -- * * 113.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 131 0 0 DROP udp -- * * 114.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 132 1 112 DROP udp -- * * 115.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 133 0 0 DROP udp -- * * 116.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 134 0 0 DROP udp -- * * 117.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 135 0 0 DROP udp -- * * 118.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 136 0 0 DROP udp -- * * 119.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 137 0 0 DROP udp -- * * 120.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 138 0 0 DROP udp -- * * 121.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 139 0 0 DROP udp -- * * 122.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 140 0 0 DROP udp -- * * 123.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 141 0 0 DROP udp -- * * 125.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 142 0 0 DROP udp -- * * 134.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 143 0 0 DROP udp -- * * 146.185.0.0/16 0.0.0.0/0 udp dpts:1:50000 144 0 0 DROP udp -- * * 148.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 145 0 0 DROP udp -- * * 151.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 146 0 0 DROP udp -- * * 175.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 147 0 0 DROP udp -- * * 176.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 148 1 70 DROP udp -- * * 177.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 149 0 0 DROP udp -- * * 178.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 150 0 0 DROP udp -- * * 179.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 151 0 0 DROP udp -- * * 180.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 152 0 0 DROP udp -- * * 181.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 153 0 0 DROP udp -- * * 182.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 154 0 0 DROP udp -- * * 183.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 155 0 0 DROP udp -- * * 185.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 156 1 74 DROP udp -- * * 186.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 157 0 0 DROP udp -- * * 187.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 158 0 0 DROP udp -- * * 188.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 159 0 0 DROP udp -- * * 189.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 160 0 0 DROP udp -- * * 190.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 161 0 0 DROP udp -- * * 192.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 162 0 0 DROP udp -- * * 196.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 163 0 0 DROP udp -- * * 197.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 164 0 0 DROP udp -- * * 198.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 165 0 0 DROP udp -- * * 2.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 166 0 0 DROP udp -- * * 200.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 167 0 0 DROP udp -- * * 201.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 168 0 0 DROP udp -- * * 202.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 169 0 0 DROP udp -- * * 203.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 170 0 0 DROP udp -- * * 210.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 171 0 0 DROP udp -- * * 211.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 172 0 0 DROP udp -- * * 212.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 173 0 0 DROP udp -- * * 213.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 174 0 0 DROP udp -- * * 214.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 175 0 0 DROP udp -- * * 215.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 176 0 0 DROP udp -- * * 216.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 177 0 0 DROP udp -- * * 217.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 178 1 80 DROP udp -- * * 218.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 179 0 0 DROP udp -- * * 219.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 180 0 0 DROP udp -- * * 220.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 181 0 0 DROP udp -- * * 222.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 182 0 0 DROP udp -- * * 27.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 183 0 0 DROP udp -- * * 31.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 184 0 0 DROP udp -- * * 37.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 185 0 0 DROP udp -- * * 41.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 186 0 0 DROP udp -- * * 42.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 187 0 0 DROP udp -- * * 43.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 188 0 0 DROP udp -- * * 46.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 189 0 0 DROP udp -- * * 49.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 190 0 0 DROP udp -- * * 5.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 191 0 0 DROP udp -- * * 58.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 192 0 0 DROP udp -- * * 60.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 193 0 0 DROP udp -- * * 61.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 194 0 0 DROP udp -- * * 62.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 195 0 0 DROP udp -- * * 63.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 196 0 0 DROP udp -- * * 64.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 197 0 0 DROP udp -- * * 65.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 198 0 0 DROP udp -- * * 66.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 199 0 0 DROP udp -- * * 69.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 200 0 0 DROP udp -- * * 72.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 201 0 0 DROP udp -- * * 78.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 202 0 0 DROP udp -- * * 81.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 203 0 0 DROP udp -- * * 82.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 204 0 0 DROP udp -- * * 83.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 205 0 0 DROP udp -- * * 84.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 206 0 0 DROP udp -- * * 85.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 207 0 0 DROP udp -- * * 86.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 208 0 0 DROP udp -- * * 87.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 209 0 0 DROP udp -- * * 88.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 210 0 0 DROP udp -- * * 89.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 211 0 0 DROP udp -- * * 90.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 212 0 0 DROP udp -- * * 91.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 213 0 0 DROP udp -- * * 92.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 214 2 72 DROP udp -- * * 93.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 215 0 0 DROP udp -- * * 94.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 216 0 0 DROP udp -- * * 95.0.0.0/8 0.0.0.0/0 udp dpts:1:50000 217 0 0 DROP tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:12443 218 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11443 219 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:11444 220 23 1104 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8447 221 24 1152 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8443 222 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:8880 223 207 11096 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 224 19 996 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443 225 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21 226 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 227 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:587 228 4 216 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:25 229 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:465 230 14 840 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:110 231 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:995 232 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:143 233 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:993 234 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:106 235 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:3306 236 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:5432 237 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9008 238 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:9080 239 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:137 240 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:138 241 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:139 242 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:445 243 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:1194 244 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 245 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 246 73 4488 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 8 code 0 247 77 23598 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 0 0 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 0 0 ACCEPT all -- lo lo 0.0.0.0/0 0.0.0.0/0 5 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy DROP 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 31004 25M ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 1 333 REJECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp flags:!0x17/0x02 state NEW reject-with tcp-reset 3 0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 state INVALID 4 434 25606 ACCEPT all -- * lo 0.0.0.0/0 0.0.0.0/0 5 328 21324 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0

  Read the article

• simscan's regex

  - by alexus

  -bash-3.2# cat /var/qmail/control/simcontrol :clam=yes,spam=yes,spam_hits=7.0,regex=^Subject\072.*(7.|8.)\%.*:(?m)\.ru\/\n{21} -bash-3.2# cat ./cur/msg.1268526916.764928.8759:2,S | pcregrep -M '(?m)\.ru\/\n{21}' Party's over for Clinton http://260.noonwife.ru/ of because Abraham is large Confessional murdered the for -bash-3.2# grep -c REGEX /var/log/qmail/smtpd/@* /var/log/qmail/smtpd/@400000004b9c134f0095ecdc.s:25 /var/log/qmail/smtpd/@400000004b9c144c2748a9dc.s:6 /var/log/qmail/smtpd/@400000004b9c16eb2ac491fc.s:12 /var/log/qmail/smtpd/@400000004b9c1c61239185ac.s:28 /var/log/qmail/smtpd/@400000004b9c216a3013fdb4.s:29 /var/log/qmail/smtpd/@400000004b9c26b11fb5263c.s:22 /var/log/qmail/smtpd/@400000004b9c2b2505d2035c.s:25 /var/log/qmail/smtpd/@400000004b9c2ec3139530f4.s:12 /var/log/qmail/smtpd/@400000004b9c312c160d7454.s:4 -bash-3.2# first regex works, yet i can't get it to match second, even though pcregrep matches it using same regex just fine any ideas?

  Read the article

• How to allow local LAN access while connected to Cisco VPN?

  - by Ian Boyd

  How can I maintain local LAN access while connected to Cisco VPN? When connecting using Cisco VPN, the server has to ability to instruct the client to prevent local LAN access. Assuming this server-side option cannot be turned off, how can allow local LAN access while connected with a Cisco VPN client? I used to think it was simply a matter of routes being added that capture LAN traffic with a higher metric, for example: Network Destination Netmask Gateway Interface Metric 10.0.0.0 255.255.0.0 10.0.0.3 10.0.0.3 20 <--Local LAN 10.0.0.0 255.255.0.0 192.168.199.1 192.168.199.12 1 <--VPN Link And trying to delete the 10.0.x.x -> 192.168.199.12 route don't have any effect: >route delete 10.0.0.0 >route delete 10.0.0.0 mask 255.255.0.0 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 if 192.168.199.12 >route delete 10.0.0.0 mask 255.255.0.0 192.168.199.1 if 0x3 And while it still might simply be a routing issue, attempts to add or delete routes fail. At what level is Cisco VPN client driver doing what in the networking stack that takes overrides a local administrator's ability to administer their machine? The Cisco VPN client cannot be employing magic. It's still software running on my computer. What mechanism is it using to interfere with my machine's network? What happens when an IP/ICMP packet arrives on the network? Where in the networking stack is the packet getting eaten? See also No internet connection with Cisco VPN Cisco VPN Client interrupts connectivity to my LDAP server Cisco VPN stops Windows 7 Browsing How can I prohibit the creation of a route in Windows XP upon connection to Cisco VPN? Rerouting local LAN and Internet traffic when in VPN VPN Client "Allow local LAN Access" Allow Local LAN Access for VPN Clients on the VPN 3000 Concentrator Configuration Example LAN access gone when I connect to VPN Windows XP Documentation: Route Edit: Things I've not yet tried: >route delete 10.0.* Update: Since Cisco has abandoned their old client, in favor of AnyConnect (HTTP SSL based VPN), this question, unsolved, can be left as a relic of history. Going forward, we can try to solve the same problem with their new client.

  Read the article

• DNS "recursion not available" using a Cisco AnyConnect VPN connection

  - by codeape

  Does anyone have experience with configuring Cisco AnyConnect VPN? We have a problem with client DNS name resolution when connected over VPN. To me, it looks as if the Cisco AnyConnect VPN client intercepts DNS queries from the clients. Can someone confirm that the AnyConnect VPN client in fact does this (intercepts DNS traffic)? Where is this configured on the VPN server? EDIT: Here's how the routing table changes when I connect to the VPN: [~] $ diff -u /tmp/route_normal /tmp/route_vpn --- /tmp/route_normal 2010-01-20 19:23:47.000000000 +0100 +++ /tmp/route_vpn 2010-01-20 19:24:46.000000000 +0100 @@ -1,6 +1,10 @@ Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface +xxx.xxx.xx.xx.i 10.0.0.1 255.255.255.255 UGH 0 0 0 ath0 172.16.53.0 * 255.255.255.0 U 0 0 0 vmnet1 10.0.0.0 * 255.255.255.0 U 0 0 0 ath0 +172.17.20.0 * 255.255.255.0 U 0 0 0 cscotun 0 +192.168.111.0 172.17.20.212 255.255.255.0 UG 0 0 0 cscotun 0 172.16.140.0 * 255.255.255.0 U 0 0 0 vmnet8 +172.16.0.0 172.17.20.212 255.255.0.0 UG 0 0 0 cscotun 0 default 10.0.0.1 0.0.0.0 UG 0 0 0 ath0 EDIT 2: The IT guy has done "something" on the VPN endpoint. Now I get "recursion not available" when doing nslookup. The DNS servers have recursion enabled. So it must be the Cisco VPN DNS interception messing this up. ubuntu@domU-12-31-39-00-ED-14:~$ /opt/cisco/vpn/bin/vpn connect xxx.xxxxxx.xx ... >> Please enter your username and password ... >> notice: Establishing VPN... >> state: Connected >> notice: VPN session established to ... ubuntu@domU-12-31-39-00-ED-14:~$ nslookup www.vg.no ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server ;; Got recursion not available from ..., trying next server Server: 172.16.0.23 Address: 172.16.0.23#53 ** server can't find www.vg.no.compute-1.internal: REFUSED ubuntu@domU-12-31-39-00-ED-14:~$ ping 195.88.55.16 PING 195.88.55.16 (195.88.55.16) 56(84) bytes of data. 64 bytes from 195.88.55.16: icmp_seq=1 ttl=240 time=110 ms 64 bytes from 195.88.55.16: icmp_seq=2 ttl=240 time=111 ms 64 bytes from 195.88.55.16: icmp_seq=3 ttl=240 time=109 ms ^C --- 195.88.55.16 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2017ms rtt min/avg/max/mdev = 109.953/110.379/111.075/0.496 ms

  Read the article

• Dynamic DNS with Comcast

  - by colithium

  I've just recently moved across town. Previously, I had Dynamic DNS set up so I could remotely connect to my desktop (primarily to use TightVNC). My ISP was Comcast and I'm in the Denver, Colorado area. Currently, I'm still with Comcast and still in Denver. My router connects to the internet just fine and my Dynamic DNS record over at DynDNS did get updated with my router's current external IP address. So my router, DynDNS, and public DNS records all agree what my IP address is. However, I can't actually connect to anything from the outside world. My trace route to Google looks something like: Tracing route to google.com [74.125.19.147] 1 3 ms 1 ms 1 ms 192.168.1.1 (this is the internal IP address of my router) 2 * * * Request timed out. 3 9 ms 8 ms 10 ms te-8-2-ur02.wheatridge.co.denver.comcast.net [68.85.221.177] 4 12 ms 12 ms 19 ms te-0-8-0-2-ar02.aurora.co.denver.comcast.net [68.86.103.97] 5 16 ms 13 ms 11 ms pos-0-3-0-0-cr01.denver.co.ibone.comcast.net [68.86.91.1] 6 28 ms 28 ms 27 ms pos-0-9-0-0-cr01.dallas.tx.ibone.comcast.net [68.86.85.174] 7 29 ms 27 ms 28 ms pos-0-1-0-0-pe01.1950stemmons.tx.ibone.comcast.net [68.86.86.94] 8 66 ms 108 ms * 75.149.231.70 9 65 ms 68 ms 93 ms 72.14.233.77 10 67 ms 66 ms 66 ms 72.14.233.111 11 67 ms 67 ms 69 ms 216.239.43.144 12 68 ms 71 ms 73 ms 209.85.249.30 13 66 ms 66 ms 68 ms nuq04s01-in-f147.1e100.net [74.125.19.147] This is what the trace route looks like from an outside source to my DynDNS domain name: traceroute to 98.245.67.65 (98.245.67.65) 1 illuminati-130 138.67.130.61 2 138.67.63.253 138.67.63.253 3 vermiculite 138.67.253.20 4 csm-ct-gw 138.67.253.244 5 138.67.253.2 138.67.253.2 6 ge-7-24-ar01.denver.co.denver.comcast.net 68.86.128.17 7 te-0-4-0-0-ar02.denver.co.denver.comcast.net 68.86.179.21 8 te-9-3-ur01.wheatridge.co.denver.comcast.net 68.86.103.18 9 * * * {Times Out} Now my guess is, whatever is sitting just beyond my router (what the modem connects to) is gumming things up. Even though the routes aren't EXACTLY the same, that appears to be the spot that the trace route either stops or doesn't get a response. My question is, for Comcast networks (particularly in Denver), what would be the device that typically sits there? Is there anything I can do about it? That device seems to not respond to PING but does forward it along when I'm going outwards. But it looks like it eats it when the request is coming in. It's hard to prove that from these logs but I'm assuming that's the case because my router used to accept connections from the outside and I haven't changed anything on it.

  Read the article

• Kickstart installation: Unable to read package metadata

  - by yacov

  I'm trying to install a CentOS OS with kickstart using HTTP as the installation source. The kickstart server and the installed server are both running on VMs on the same machine. after the anaconda system installer starts it fails with the following message: I tried installing two different versions of Centos(5.5 and 5.2), and they both pass a CDROM media test the manual installation provides. The only errors on the kickstart server side are some errors in the httpd log I consider irrelevant: [Sat Mar 12 23:25:19 2011] [error] [client 192.168.1.112] File does not exist: /tftpboot/linux-install/platforms/CentOS5.5/images/product.img [Sat Mar 12 23:25:19 2011] [error] [client 192.168.1.112] File does not exist: /tftpboot/linux-install/platforms/CentOS5.5/disc1 I tried searching the internet for days and haven't found any solution... Does anyone have any idea?

  Read the article

• Setting up Zend Framework 2 on GoDaddy

  - by Yossi

  I tried setting up ZF2 on the GoDaddy shared servers, though it doesn't work. I tried to download it directly, and using the git composer (which I managed to install successfully on the server). The error I'm receiving from PHP is this: Warning: Unexpected character in input: '\' (ASCII=92) state=1 in /home/content/82/5123082/html/tmp/ZendSkeletonApplication/public/index.php on line 12 Parse error: syntax error, unexpected T_STRING in /home/content/82/5123082/html/tmp/ZendSkeletonApplication/public/index.php on line 12 The PHP version the account is running: PHP 5.3.13 (cli) (built: May 14 2012 16:26 The Linux server that is used is: Linux ...secureserver.net ... #1 SMP Fri Jul 15 08:15:44 EDT 2011 i686 i686 i386 GNU/Linux CentOS release 5.5 (Final) Any ideas what I'm doing wrong? I never worked with ZF1, and I know there are custom solution out there for ZF1, but I didn't manage to port them into ZF2.

  Read the article

• Glibc importance of error ...

  - by Oz123

  Hi Everyone, I am following LFS 6.7, and I reached the point where I compile glibc-2.12.1 . I mounted the LFS partition with the atime option: here is a confirm on that I think: /dev/sdb1 on /mnt /lfs type ext4 (rw) I get the following errors on making the test, and I have no clue if I should try to resolve them, or just ignore them and go on ... rpc/types.h sunrpc/rpc/svc_auth.h sunrpc/rpcsvc/bootparam.h sysvipc/sys/ipc.h \ sysvipc/sys/msg.h sysvipc/sys/sem.h sysvipc/sys/shm.h termios/termios.h \ termios/sys/termios.h termios/sys/ttychars.h time/time.h time/sys/time.h \ time/sys/timeb.h wcsmbs/wchar.h wctype/wctype.h > \ /sources/glibc-build/begin-end-check.out make[1]: Target `check' not remade because of errors. make[1]: Leaving directory `/sources/glibc-2.12.1' make: *** [check] Error 2 root:/sources/glibc-build# grep Error glibc-check-log make[2]: *** [/sources/glibc-build/math/test-float.out] Error 1 make[2]: *** [/sources/glibc-build/math/test-ifloat.out] Error 1 make[1]: *** [math/tests] Error 2 make[2]: [/sources/glibc-build/posix/annexc.out] Error 1 (ignored) make: *** [check] Error 2 thanks in advance, Oz

  Read the article

• Apache2 cgi's crash on odbc db access (but run fine from shell)

  - by Martin

  Problem overview (details below): I'm having an apache2 + ruby integration problem when trying to connect to an ODBC data source. The main problem boils down to the fact that scripts that run fine from an interactive shell crash ruby on the database connect line when run as a cgi from apache2. Ruby cgi's that don't try to access the ODBC datasource work fine. And (again) ruby scripts that connect to a database with ODBC do fine when executed from the command line (or cron). This behavior is identical when I use perl instead of ruby. So, the issue seems to be with the environment provided for ruby (perl) by apache2, but I can't figure out what is wrong or what to do about it. Does anyone have any suggestions on how to get these cgi scripts to work properly? I've tried many different things to get this to work, and I'm happy to provide more detail of any aspect if that will help. Details: Mac OS X Server 10.5.8 Xserve 2 x 2.66 Dual-Core Intel Xeon (12 GB) Apache 2.2.13 ruby 1.8.6 (2008-08-11 patchlevel 287) [universal-darwin9.0] ruby-odbc 0.9997 dbd-odbc (0.2.5) dbi (0.4.3) mod_ruby 1.3.0 Perl -- 5.8.8 DBI -- 1.609 DBD::ODBC -- 1.23 odbc driver: DataDirect SequeLink v5.5 (/Library/ODBC/SequeLink.bundle/Contents/MacOS/ivslk20.dylib) odbc datasource: FileMaker Server 10 (v10.0.2.206) ) a minimal version of a script (anonymized) that will crash in apache but run successfully from a shell: #!/usr/bin/ruby require 'cgi' require 'odbc' cgi = CGI.new("html3") aConnection = ODBC::connect('DBFile', "username", 'password') aQuery = aConnection.prepare("SELECT zzz_kP_ID FROM DBTable WHERE zzz_kP_ID = 81044") aQuery.execute aRecord = aQuery.fetch_hash.inspect aQuery.drop aConnection.disconnect # aRecord = '{"zzz_kP_ID"=>81044.0}' cgi.out{ cgi.html{ cgi.body{ "<pre>Primary Key: #{aRecord}</pre>" } } } Example of running this from a shell: gamma% ./minimal.rb (offline mode: enter name=value pairs on standard input) Content-Type: text/html Content-Length: 134 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"><HTML><BODY><pre>Primary Key: {"zzz_kP_ID"=>81044.0}</pre></font></BODY></HTML>% gamma% ) typical crash log lines: Dec 22 14:02:38 gamma ReportCrash[79237]: Formulating crash report for process perl[79236] Dec 22 14:02:38 gamma ReportCrash[79237]: Saved crashreport to /Library/Logs/CrashReporter/perl_2009-12-22-140237_HTCF.crash using uid: 0 gid: 0, euid: 0 egid: 0 Dec 22 14:03:13 gamma ReportCrash[79256]: Formulating crash report for process perl[79253] Dec 22 14:03:13 gamma ReportCrash[79256]: Saved crashreport to /Library/Logs/CrashReporter/perl_2009-12-22-140311_HTCF.crash using uid: 0 gid: 0, euid: 0 egid: 0

  Read the article

• Installing google chrome on RHEL 5.3

  - by Xinus

  I am trying to install Google chrome on RHEL 5.3 but getting error as Missing Dependency: libnss3.so(NSS_3.12.3) is needed by package google-chrome-beta-4.0.249.43-34537.i386 (/root/Desktop/google-chrome-beta_current_i386.rpm) Missing Dependency: xdg-utils is needed by package google-chrome-beta-4.0.249.43-34537.i386 (/root/Desktop/google-chrome-beta_current_i386.rpm) Missing Dependency: lsb >= 3.2 is needed by package google-chrome-beta-4.0.249.43-34537.i386 (/root/Desktop/google-chrome-beta_current_i386.rpm) When try to install lsb package , I get output as [root@localhost softwares]# yum install redhat-lsb Loaded plugins: rhnplugin, security This system is not registered with RHN. RHN support will be disabled. Setting up Install Process Parsing package install arguments Package redhat-lsb-3.1-12.3.EL.i386 installed and not available Nothing to do

  Read the article

• how to bypass internal DNS?

  - by fabjoa

  This is about Ubuntu but should be pretty much the same on all Linux flavors. Let's say I add an entry to my /etc/hosts such as 127.0.1.12 facebook.com and an Apache virtual host such as <VirtualHost 127.0.1.12> ServerName facebook.com DocumentRoot /var/www </VirtualHost> when i open my browser and send a GET request to facebook.com, firefox will browse my /var/www folder. Question: How could I fetch (ie, using wget in bash) the real facebook.com domain - without erasing the entry in /etc/hosts nor my Apache VirtualHost -- IOW how could I bypass internal DNS?

  Read the article

• Using virt-install to mount multiple cdrom drives/images

  - by Dana the Sane

  I would like to create a windows xp guest from the windows xp upgrade cd I have, along with one of a few full versions I have around. However, when I reach the stage in the installer where I am prompted to insert a full version cd, the installer can't find it, i.e.: Setup could not read the CD you inserted, or the CD is not a valid Windows CD.. Is there a work-around for this?, my Googling didn't uncover anything. I've tried various combinations of mounting .iso files and specifying disks, such as: $sudo virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 -c /dev/cdrom --check-cpu If I try to specify multiple cdrom drives, I receive an error: virt-install --accelerate --connect qemu:///system -n xpsp1 -r 2048 --disk ./vm/winxp_sp1.iso,device=cdrom --disk /dev/cdrom,device=cdrom --disk ./vm/windows.qcow2,size=12 --vnc --noautoconsole --os-type windows --os-variant winxp --vcpus 2 --check-cpu Starting install... ERROR IDE CDROM must use 'hdc', but target in use.

  Read the article

• Stop Zabbix notification for nodes under zabbix-proxy when proxy service is down

  - by A_01

  I have a zabbix-proxy and 12 nodes in that proxy. Right now whenever proxy service goes down. It send out of reach mail for all the 12 nodes. I want to send mail only for the zabbix proxy not for the nodes under that proxy Updated: Now I am trying to have a single trigger in which I want to check both the conditions like 1-check zabbix-host is not accessble from past x minutes. 2-check the host is not giving any data to the proxy(Host is down). Not the trigger should start shouting onle when we have condition in which proxy is running and node is down. I tried the below but its not working for me. Can some please help me out in this ({ip-10-4-1-17.ec2.internal:agent.ping.nodata(2m)}=1) & ({ip-10-4-1- 17.ec2.internal:zabbix[proxy,zabbixproxy.dev-test.com,lastaccess].fu??zzytime(120)}=1)

  Read the article

• List files with last access date in linux

  - by kayaker243

  I'd like to clean up a server that my webmaster let turn into a mess. I know how to list all files not accessed within the last x days using find and -atime, but what I'm looking for is to come up with a listing of the last access date for files one level down in directory /foo: /foo/bar1.txt Dec 11, 2001 /foo/bar2.txt Nov 12, 2008 /foo/bar3.txt Jan 12, 2004 For folders one level down in directory /foo, list the date of the most recently accessed file within the directory (no limit on depth for identifying last access date) /foo/bar1/ Feb 13, 2012 /foo/bar2/ Oct 11, 2008 Where /foo/bar1/ has a file modified Jan 1, 1998 and Feb 13, 2012 and /foo/bar2/ has 30 files, most recent of which was accessed Oct 11, 2008. This question is similar to: http://stackoverflow.com/questions/5566310/how-to-recursively-find-and-list-the-latest-modified-files-in-a-directory-with-s but rather than the modification date, the date of interest is the last accessed date.

  Read the article

• SQL Server "Long running transaction" performance counter: why no workee?

  - by Sleepless

  Please explain to me the following observation: I have the following piece of T-SQL code that I run from SSMS: BEGIN TRAN SELECT COUNT (*) FROM m WHERE m.[x] = 123456 or m.[y] IN (SELECT f.x FROM f) SELECT COUNT (*) FROM m WHERE m.[x] = 123456 or m.[y] IN (SELECT f.x FROM f) COMMIT TRAN The query takes about twenty seconds to run. I have no other user queries running on the server. Under these circumstances, I would expect the performance counter "MSSQL$SQLInstanceName:Transactions\Longest Transaction Running Time" to rise constantly up to a value of 20 and then drop rapidly. Instead, it rises to around 12 within two seconds and then oscillates between 12 and 14 for the duration of the query after which it drops again. According to the MS docs, the counter measures "The length of time (in seconds) since the start of the transaction that has been active longer than any other current transaction." But apparently, it doesn't. What gives?

  Read the article

• pfSense 2.1 OpenVPN client not using tunnelled interface

  - by Brian M. Hunt

  I'm having some trouble getting OpenVPN working on my pfSense box. The issue is quite strange to me. When I have the OpenVPN turned on, only my router is able to connect to the Internet. From the router I can use ping, links, etc., and connections work exactly as expected - through the VPN, with the IP address assigned by my VPN provider (Proxy.sh, incidentally). However, none of the clients on the local network can connect to the Internet. I get timeouts when using ping or a web browser. I can ping my router, and the IP address of the gateway. When I switch the default gateway from the VPN to my ISP's gateway, all works exactly as expected. Here the routing table (netstat -r) when in VPN mode, and a key for it: IPv4 Destination Gateway Flags Refs Use Mtu Netif Expire 0.0.0.0/1 10.XX.X.53 UGS 0 122 1500 ovpnc1 = default 10.XX.X.53 UGS 0 235 1500 ovpnc1 8.8.8.8 10.XX.X.53 UGHS 0 82 1500 ovpnc1 10.XX.X.1/32 10.11.0.53 UGS 0 0 1500 ovpnc1 10.XX.X.53 link#12 UH 0 0 1500 ovpnc1 10.XX.X.54 link#12 UHS 0 0 16384 lo0 ZZ.XX.XXX.0/20 link#1 U 0 83 1500 re0 ZZ.XX.XXX.XXX link#1 UHS 0 0 16384 lo0 127.0.0.1 link#9 UH 0 12 16384 lo0 128.0.0.0/1 10.11.0.53 UGS 0 123 1500 ovpnc1 192.168.1.0/24 link#11 U 0 1434 1500 ue0 192.168.1.1 link#11 UHS 0 0 16384 lo0 YYY.YYY.YYY.YYY/32 ZZ.XX.XXX.1 UGS 0 249 1500 re0 IP addresses 10.XX.X.53/54 - My DHCP-assigned IP address/pair from the VPN provider ZZ.XX.XXX.XXX - My external IP assigned by my ISP YYY.YYY.YYY.YYY - The external IP assigned by the VPN provider Interfaces ovpnc1 - My VPN client interface re0 - My LAN interface ue0 - My WAN interface This looks essentially what I would expect it to be. The default route is through the VPN provider. The VPN address is routed through the ISP-assigned IP address. I am not sure what would be wrong here. So figuring this was a firewall issue, I basically tried enabling all in/out traffic. This did not seem to remedy the problem. Also figuring it could possibly be some client networking issue, I restarted the clients on the LAN. This did not help. I also ran route flush and reset the routes manually. So I am a bit stumped, and would be very grateful for any thoughts on what the problem might be.

  Read the article

• MySQL: Pacemaker cannot start the failed master as a new slave?

  - by quanta

  I'm going to setup failover for MySQL replication (1 master and 1 slave) follow this guide: https://github.com/jayjanssen/Percona-Pacemaker-Resource-Agents/blob/master/doc/PRM-setup-guide.rst Here're the output of crm configure show: node serving-6192 \ attributes p_mysql_mysql_master_IP="192.168.6.192" node svr184R-638.localdomain \ attributes p_mysql_mysql_master_IP="192.168.6.38" primitive p_mysql ocf:percona:mysql \ params config="/etc/my.cnf" pid="/var/run/mysqld/mysqld.pid" socket="/var/lib/mysql/mysql.sock" replication_user="repl" replication_passwd="x" test_user="test_user" test_passwd="x" \ op monitor interval="5s" role="Master" OCF_CHECK_LEVEL="1" \ op monitor interval="2s" role="Slave" timeout="30s" OCF_CHECK_LEVEL="1" \ op start interval="0" timeout="120s" \ op stop interval="0" timeout="120s" primitive writer_vip ocf:heartbeat:IPaddr2 \ params ip="192.168.6.8" cidr_netmask="32" \ op monitor interval="10s" \ meta is-managed="true" ms ms_MySQL p_mysql \ meta master-max="1" master-node-max="1" clone-max="2" clone-node-max="1" notify="true" globally-unique="false" target-role="Master" is-managed="true" colocation writer_vip_on_master inf: writer_vip ms_MySQL:Master order ms_MySQL_promote_before_vip inf: ms_MySQL:promote writer_vip:start property $id="cib-bootstrap-options" \ dc-version="1.0.12-unknown" \ cluster-infrastructure="openais" \ expected-quorum-votes="2" \ no-quorum-policy="ignore" \ stonith-enabled="false" \ last-lrm-refresh="1341801689" property $id="mysql_replication" \ p_mysql_REPL_INFO="192.168.6.192|mysql-bin.000006|338" crm_mon: Last updated: Mon Jul 9 10:30:01 2012 Stack: openais Current DC: serving-6192 - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, 2 expected votes 2 Resources configured. ============ Online: [ serving-6192 svr184R-638.localdomain ] Master/Slave Set: ms_MySQL Masters: [ serving-6192 ] Slaves: [ svr184R-638.localdomain ] writer_vip (ocf::heartbeat:IPaddr2): Started serving-6192 Editing /etc/my.cnf on the serving-6192 of wrong syntax to test failover and it's working fine: svr184R-638.localdomain being promoted to become the master writer_vip switch to svr184R-638.localdomain Current state: Last updated: Mon Jul 9 10:35:57 2012 Stack: openais Current DC: serving-6192 - partition with quorum Version: 1.0.12-unknown 2 Nodes configured, 2 expected votes 2 Resources configured. ============ Online: [ serving-6192 svr184R-638.localdomain ] Master/Slave Set: ms_MySQL Masters: [ svr184R-638.localdomain ] Stopped: [ p_mysql:0 ] writer_vip (ocf::heartbeat:IPaddr2): Started svr184R-638.localdomain Failed actions: p_mysql:0_monitor_5000 (node=serving-6192, call=15, rc=7, status=complete): not running p_mysql:0_demote_0 (node=serving-6192, call=22, rc=7, status=complete): not running p_mysql:0_start_0 (node=serving-6192, call=26, rc=-2, status=Timed Out): unknown exec error Remove the wrong syntax from /etc/my.cnf on serving-6192, and restart corosync, what I would like to see is serving-6192 was started as a new slave but it doesn't: Failed actions: p_mysql:0_start_0 (node=serving-6192, call=4, rc=1, status=complete): unknown error Here're snippet of the logs which I'm suspecting: Jul 09 10:46:32 serving-6192 lrmd: [7321]: info: rsc:p_mysql:0:4: start Jul 09 10:46:32 serving-6192 lrmd: [7321]: info: RA output: (p_mysql:0:start:stderr) Error performing operation: The object/attribute does not exist Jul 09 10:46:32 serving-6192 crm_attribute: [7420]: info: Invoked: /usr/sbin/crm_attribute -N serving-6192 -l reboot --name readable -v 0 The full logs: http://fpaste.org/AyOZ/ The strange thing is I can starting it manually: export OCF_ROOT=/usr/lib/ocf export OCF_RESKEY_config="/etc/my.cnf" export OCF_RESKEY_pid="/var/run/mysqld/mysqld.pid" export OCF_RESKEY_socket="/var/lib/mysql/mysql.sock" export OCF_RESKEY_replication_user="repl" export OCF_RESKEY_replication_passwd="x" export OCF_RESKEY_test_user="test_user" export OCF_RESKEY_test_passwd="x" sh -x /usr/lib/ocf/resource.d/percona/mysql start: http://fpaste.org/RVGh/ Did I make something wrong?

  Read the article

• Excel how to get an average for column for rows that meet multiple criteria

  - by Jess

  I would like to know the average days between open and close dates for an item with a close date in a particular month. So from the below example in Jan 2013 items 2,5 and 6 were closed (Closed can be RESOLVED or CANCELLED status), each were open for 26, 9 and 6 days respectivly. So of the jobs that have a closed date in Jan 2013 (between 01/01/2013 and 13/02/13) they have an average open time (between open and close date) of 13.67 days to 2dp. I have tried a few ways to get this to work and i think the issue I am having is with the AVERAGE function. First time using a forum so apologies if my question is unclear. Was unable to post image to have this comma seperated below Item_ID,Open_Date,Status,Close_Date 1,1/06/2012,RESOLVED,16/07/2012 2,20/12/2012,RESOLVED,16/01/2013 3,2/01/2013,IN PROGRESS, 4,3/01/2013,CANCELLED,7/05/2013 5,3/01/2013,RESOLVED,12/01/2013 6,4/01/2013,RESOLVED,10/01/2013 7,1/02/2013,RESOLVED,15/02/2013 8,2/02/2013,OPEN, 9,7/02/2013,CANCELLED,26/02/2013

  Read the article

• Macos default paths prepend my defined paths in vim

  - by Bogdan Gusiev

  I am trying to call some shell command from vim with like :!ls command. But unfortunately there are some default PATHS that prepends PATHs defined in the original shell. Here is the echo $PATH output in the original shell: /usr/local/heroku/bin:/Users/bogdan/.rvm/gems/ruby-1.9.3-p194/bin:/Users/bogdan/.rvm/gems/ruby-1.9.3-p194@global/bin:/Users/bogdan/.rvm/rubies/ruby-1.9.3-p194/bin:/Users/bogdan/.rvm/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11/bin:/Users/bogdan/.rvm/bin:/Users/bogdan/bin:/Users/bogdan/.rvm/bin:/usr/local/Cellar/git/1.7.12.2/libexec/git-core:/Users/bogdan/.rvm/bin and shell called within vim: /usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/X11/bin:/Users/bogdan/.rvm/gems/ruby-1.9.3-p194@devauc/bin:/Users/bogdan/.rvm/gems/ruby-1.9.3-p194@global/bin:/Users/bogdan/.rvm/rubies/ruby-1.9.3-p194/bin:/Users/bogdan/.rvm/bin:/Users/bogdan/bin:/usr/local/Cellar/git/1.7.12.2/libexec/git-core:/Users/bogdan/.rvm/bin Why they appeared right there? How can I prevent that and make vim shell has original PATH variable.

  Read the article

• How can I effectively block torrenting?

  - by Chauncellor

  My WNR1000v3 is serving six people and two of them have decided that despite my warnings they're going to torrent heavily all day. Not dealing with that crap I decided to reserve their IPs and set up port blocking 1000-65535 at all times of the day. However.... looking at the log reveals that stuff is still going through. Half of the entries are saying: [LAN access from remote] from <externalIP>:16001 to 192.168.1.7:18946 Friday, Oct 12,2012 22:47:05 and half are saying: [Service blocked: BlockTorrents] from source 192.168.1.7, Friday, Oct 12,2012 22:46:26 Is this because of uPNP? Or does the 'block services' feature Netgear has only work with outgoing connections? Is there something that I'm missing? If it is indeed uPNP, how could I effectively block their torrenting without hurting everyone's use of services like Skype, Playstation Network, etc.?

  Read the article

• Browsers with good keyboard support

  - by egon

  What browsers have good keyboard support? That means you don't have to use the mouse so much. Or what is a good setup for browser + keyboard interaction. I know the basic keyboard shortcuts (tab switching, new tabs etc.) but I don't know a good way to switch between links and search areas - usually that means TAB, Shift-TAB one at a time. Is there maybe some plugin that'll add numbers to links and I could just do something like 12 to go to the link 12?

  Read the article

• How to tell if PAE is hurting me?

  - by James

  I have a couple of servers with 20-30 GB RAM that are running (a variant of) RHEL4. They are currently running the SMP i386 kernel, not x64, not even the hugemem kernel. This means LowMem is confined to < 1G, and thus dentry_cache and ext3_inode_cache to 100M or so each. How can I tell if this is a problem? Here's a typical vmstat report while it's compiling some Java: $ vmstat 10 procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 1 1 0 19493816 394740 922420 0 0 1058 2292 1491 1020 6 3 80 12 2 1 0 19519480 395244 850156 0 0 1179 1412 1329 1195 9 4 75 12 1 1 0 19557368 392616 828344 0 0 1783 1680 1498 1756 14 5 72 9 I don't like the way bi is nonzero when there is so much memory free. I imagine slabtop could point more directly to the problem but I don't really understand how to interpret its output.

  Read the article

• Opscode Chef nginx compile from source issue reports successful run but does nothing

  - by v_abhi_v

  I am trying to install nginx from source in Opscode Chef and its bit weird, it runs complaining nothing but does not install it either. This is how my role attributes look like looks like "nginx":{ "default_site_enabled":false, "version":"1.2.6", "init_style":"init", "install_method":"source", "configure_flags":[ "--without-http_access_module", "--without-http_auth_basic_module", "--without-http_autoindex_module", "--without-http_browser_module", "--without-http_charset_module", "--without-http_fastcgi_module", "--without-http_memcached_module", "--without-http_referer_module", "--without-http_scgi_module", "--without-http_split_clients_module" ], "log_dir":"/var/log/nginx", "binary":"/opt/nginx/sbin/nginx", "source":{ "prefix":"/opt/nginx/dist", "modules":["http_ssl_module", "http_gzip_static_module" ] } }, The chef log shows: [2012-12-19T02:37:44+00:00] INFO: Processing bash[compile_nginx_source] action run (nginx::source line 82) [2012-12-19T02:37:45+00:00] INFO: bash[compile_nginx_source] ran successfully I am clueless on what's going on :(

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >