Search Results

Search found 22756 results on 911 pages for 'cisco vpn client'.

Page 92/911 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • L2TP and multiple interfaces on the machine

    - by Alex
    We have setup ipsec and l2tp on linux. One question came up (due to firewall management policy) is whether it's possible to have 1 virtual interface instead of one per connected client. Now we have: ppp0 serverip clientip1 ppp1 serverip clientip2 Want to have: l2tp_tun serverip serverip like with OpenVPN's tun interfaces and then to be able to push IP address and route to each client.

    Read the article

  • Replace DNS on Openvpn client without redirect-gateway

    - by Gabor Vincze
    I am trying to push DNS to the client with OpenVPN server with config: push "dhcp-option DNS 192.168.x.x" It is working well, but what I really need is that during the VPN connection I do not want to use my primary resolvers, clients should use only the DNS provided by the server. It can be done with push redirect-gateway, but I do not want to tunnel all connections from the client thru the VPN, only specific networks. Is it possible to do it somehow? Linux clients are OK with a script, on Windows I am not sure

    Read the article

  • IntegrationTests - A potentially dangerous Request.Path value was detected from the client

    - by stacker
    I get this error: A potentially dangerous Request.Path value was detected from the client (?). when this URI: http://www.site.com/%3f. How can I write a integration test for this type of errors. I want to test against all this erros: A potentially dangerous Request.Path value was detected from the client A potentially dangerous Request.Cookies value was detected from the client A potentially dangerous Request.Form value was detected from the client A potentially dangerous Request.QueryString value was detected from the client

    Read the article

  • openerp client customization

    - by iamgopal
    openerp client seems to be nice and working , i would like to hack it and use it as a front end to my open erp solution. but the documentation regarding client side design or customization is poor on openerp site , is there any good reference or documentation available for further digging in to openerp client side coding ? or more : if any similar client solution available that can be plug in to any back end system. ( i.e. rich internet client )

    Read the article

  • Implement QoS/Bandwidth Management or Upgrade Bandwidth?

    - by Michael
    A question that I'm faced with currently. Here's my setup: Cisco ASA 5510 15Mbps Internet Connection @ $1350/month The bandwidth was originally meant for 35-45 people but we've grown quite quickly to roughly 60-65 people. Needless to say, when I check bandwidth logs it's almost always spiked at 15Mbps. I did use Wireshark to do some poking around to see what was hogging up our bandwidth but with everything running through CDNs and Cloud Services it proved difficult to get a good grasp of where our bandwidth was going. So the question is do I ONLY implement bandwidth management through ASA OR upgrade the Internet to 50Mbps ($1600/month) and then implement bandwidth management through ASA? Any suggestions on how to segment the 15Mbps connection if we decided ONLY to go with the bandwidth management solution? Thanks. UPDATE 1 Installed PRTG and used packet content to monitor the traffic. As I suspected still pretty vague. My Top Connections include the following: a204-2-160-16.deploy.akamaitechnologies.com ec2-50-16-212-159.compute-1.amazonaws.com a204-2-160-48.deploy.akamaitechnologies.com a72-247-247-133.deploy.akamaitechnologies.com mediaserver-sv5-t1-1.pandora.com Other than the Pandora destination, the rest doesn't tell me much on how to properly control the bandwidth. Any thoughts or suggestions? Thanks. M

    Read the article

  • ASA DHCP Relay configuration..

    - by Jeff
    I have locations in different cities, connected using 2 Cisco ASA devices. my main location, corporate, use the IP 192.168.1.x The second location, remote store, use the IP 192.168.3.x I have a DHCP server (192.168.1.254) at my corporate location. I have created a scope for the 192.168.1.x which works fine for the corporate location. I created a scope for the remote location (192.168.3.x) on my DHCP server and tried to configure the remote ASA DCHP Relay, on the remote ASA: I disabled the DHCP Server on the inside. I enabled DHCP Relay on the inside, with set route set at yes. I set the Global DHCP Relay Servers, specify up to four servers to which DHCP requests would be relayed. I added my DHCP, 192.168.1.254 I flashed these settings to the ASA and gave it a try, didn't do anything. am i missing something - forgetting something. not really sure what im doing wrong. DHCP Settings on remote ASA: dhcp-client update dns server both dhcpd dns 192.168.1.254 dhcpd ping_timeout 750 dhcpd domain JEWELS.LOCAL dhcpd auto_config outside dhcpd update dns both ! dhcpd address 192.168.3.2-192.168.3.33 inside ! dhcprelay server 192.168.1.254 outside dhcprelay enable inside dhcprelay setroute inside on my local ASA: i have two ACLs for UDP ports 67 and 68 permitting any inbound traffic from the remote locations IP ... dhcprelay timeout 120

    Read the article

  • Why is the link between my switch and my router always negotiating half-duplex mode?

    - by Massimo
    I have a Cisco 2950 switch which has one of its ports connected to an Internet router provided by my ISP; I have no access to the router configuration, but I manage the switch. If I leave all switch ports with their default setup (auto-negotiation of speed and duplex mode), this link always connects at 100 MBit/s, but in half-duplex mode. I've tried replacing the cable, and also moving the link to another switch port: the result is always the same. A different device connected to the same port (or to any switch port, really) shows no problem at all. It could be guesed that someone configured the router to only connect in half-duplex mode... BUT, here's the catch: if I manually force the switch port to full-duplex mode (duplex full in the interface configuration), the link goes up, stays up and is completely stable. So: The connection is not forced to half-duplex mode by the router, otherwise it would not connect at all if I force the switch end to full-duplex. There is no actual link problem, otherwise the full-duplex connection would not go up or would at least show some errors. But if I leave the port free to auto-negotiate, it always connects in half-duplex mode. Why?

    Read the article

  • Web to Print system - which client side technology should I use

    - by mr null
    I'm getting started to develop Web to Print system. My main concern is which client-side techology should I use: jQuery/CSS Flex/ActionScript or something else? For now, idea is that user/customer choose Product eg: Business card Attributes: Dimensions,Paper type, ... etc Template or blank Adjust product (editor) Preview & order Output should be PDF 300dpi. My main issue is: adding/adjusting text in editor. (font size, font family...). Because application should be cross browser. And I think that 10px Arial can't be the same in Firefox 5 and IE 8. It must be pixel perfect in every browser. If somebody order $100 of business cards, and text is different that he/she saw when ordering - that is a big problem. So, Flash platform should be the answer. But, as I see it's dying technology, 2012 is here - HTML5 is replacing Flash rapidly. I hope that you understand me, so every guideline or few smart words would be very appreciating.

    Read the article

  • Piecing together low-powered hardware for an RS-232 terminal server

    - by Fred
    I'm working on reconstructing my Cisco lab for training/educational purposes and I found that the actual terminal server I have is dead. I have a couple of 8-port PCI serial cards which would be more than ample for my lab, but I don't want to leave my personal computer running to be able to access the console ports. Ideally I would access the terminal server remotely, either by SSH/RDP to the box (depending on what OS I go with) or by installing a software package that allows me to telnet directly to a serial port. I know I've found a program that does this under Linux in the past but its name escapes me at the moment. I'm thinking about scavenging for some old hardware, on eBay or something, to put together a low-powered PC. Needs to be something that: Has Low-power consumption Has at least 2 PCI slots (though I certainly wouldn't complain about having more) Has onboard Ethernet (or, if not, another PCI or ISA slot (not shared)) Can be headless once an OS installed (probably Linux) I'm currently leaning towards an old fashioned Pentium (sub-133MHz era) but I am wondering if anybody else knows of another platform/mobo that would suit these needs. Alternatively, I've been considering buying a Raspberry Pi and a big USB hub along with a bunch of USB-Serial adapters but this sounds like it'd get messy quick with cables and adapters all over the place, and I may not even have the same ttyS#'s between boots.

    Read the article

  • Swapping out a hardware firewall does the mac address get cached?

    - by Dan
    We need to replace a hardware firewall (cisco pix) and have a spare that we will use (temporarily). The firewall sits in front of a couple of web-servers colocated at a data-centre. The replacement will be configured with identical settings (external/internal IP addresses, configured ports etc.). When we swap the firewalls over, will this work immediately or will the old Pix's mac address be cached and the new firewall not be seen until the cache is cleared? (What is it though that is caching the address? Is it just the switch/router that our pix is connected to?) Reason for asking is a few years ago I had a smoothwall firewall in front of a lone server (the external IP of the smoothwall was also the external IP of the web-server). When I replaced the smoothwall with a pix, the IP address of the web-server stayed the same but it now had to be reached via the new firewall on a different IP. It took about 2-4 hours before the rest of the world could see that web-server again. I'm hoping for less downtime this time!

    Read the article

  • Oracle Java Embedded Client 1.1 Released

    - by Roger Brinkley
    Yesterday an update release of Oracle Java Embedded Client (OJEC) 1.1 quietly slipped out door for general availability. Until last year it was pretty difficult to get your hands on either a Connected Limited Device Configuration (CLDC) for small devices or a Connected Device Configuration (CDC) for medium devices java implementation without a substantial initial commitment. But with the the release of OJWC (CLDC) and OJEC (CDC) last year that has changed. OJEC 1.1 is a binary distribution designed for installation on medium configurations which is a mid range processor requiring a  slow startup time, seamless upgrades, in a cost sensitive hardware environment  anywhere from 3.5mb to 8 mb. There are headless as well as headed versions available. It is intended for devices, such as Blu-­-ray Disc players, set-­-top boxes, residential gateways,VOIP phones, and similar. From a software point of view, OJEC is the Java runtime platform implementation of Connected Device Configuration (CDC v1.1, JSR-­-218), Foundation Profile (FP v1.1, JSR-­-219), and Personal Basis Profile (PBP v1.1, JSR-­-217)  and includes optional packages RMI (JSR 66), JDBC (JSR 169) and XML API for Java ME (JSR 280), and Java TV (JSR-­-927). New to this release is support for the XML API (JSR 280) and a number of bug fixes and performance enhancements, including an improved Just-in-Time (JIT) compilation for the x86 chipset architecture. The platforms supported include ArmV5, ArmV6/ArmV7, MIPS 32 74K, and X86 in headless mode. For embedded developers there are number of advantages to using Java and if you have shied away from the JavaME edition in the past I would encourage you to look into the updated version of OJEC 1.1.

    Read the article

  • DDoS nulling to some ips and other options?

    - by Prix
    I am looking for some information in regards DDoS in the follow scenario: I have a server that is behind a Cisco Guard and it will be DDoS'ed, I only care about a set list of IPS that by not means are the attackers. Is it possible to null all other ips but this list to actually get any response to my server or in the long run no matter what I do if they have enough DDoS power I will just go down like a flie ? Is there any recommended company out there that can actually cope with a DDoS ? My server will mainly run several clients that will get connected to a external server and all it needs access to is my local MySQL the the private network so I can access it. There will be no other services runnings such as web or ftp etc at least not to the external ips of the server if i ever have to have any of these service they will be on the private network. The MySQL will be available externally only to 1 safe ip not known by anyone but me and internally at localhost + private network. Are there any solutions ?

    Read the article

  • Large enterprise application - clients wish to use duplicate e-mails addresses?

    - by Alex Key
    I'd like to know people's opinions, reactions to clients and technical work arounds (if applicable), to the issue of an enterprise application where a client wishes to use duplicate e-mail addresses? To clarify, when I say duplicate e-mail addresses I mean within the same client system, having multiple users that have the same e-mail address. So not just using generic e-mail addresses but using the e-mail address of another user. e.g. Bob Jenkins: [email protected] James Jeffery: [email protected] Context To give this some further context, in the e-learning sector it is common that although all staff in an organisation must complete e-learning - they may not have their own e-mail address so they choose to use their managers e-mail address. Albeit against good practice in public sites... it's a requirement we've over and over again where an organisation is split between office based staff and perhaps e.g. staff in a warehouse. Where problem lies Mr Steak, good point, the problem lies in password resets and perhaps in situations where semi-personal information could be sent (not confidential enough to worry about the insecurities of email). Perhaps reminders for specific system actions, which would be confusing for the unintended party to see (if perhaps misreading the e-mail's intended recipient) Possible solutions System knowing the difference between a "for the attention of" and direct to the person e-mails, including this in the body text. Using alternative communication such as SMS Simply not having e-mails sent to people who are not the intended recipient. Providing an e-mail service ourselfs (not really viable for a corporate IT dept) Thoughts?

    Read the article

  • Http handler for classic ASP application for introducing a layer between client and server

    - by JPReddy
    I've a huge classic ASP application where in thousands of users manage their company/business data. Currently this is not multi-user so that application users can create users and authorize them to access certain areas in the system. I'm thinking of writing a handler which will act as middle man between client and server and go through every request and find out who the user is and whether he is authorized to access the data he is trying to. For the moment ignore about the part how I'm going to check the authorization and all that stuff. Just want to know whether I can implement a ASP.net handler and use it as middle man for the requests coming for a asp website? I just want to read the url and see what is the page user is trying to access and what are the parameters he is passing in the url the posted data. Is this possible? I read that Asp.net handler cannot be used with asp website and I need to use isapi filter or extensions for that and that can be developed only c/c++. Can anybody through some light on this and guide me whether I'm in the right direction or not?

    Read the article

  • Why Would one VLAN have no Communication on one Switch?

    - by Webs
    So the problem is we have a device or host that needs to communicate on a specific VLAN. This VLAN is not new, it is running all throughout our environment and works fine. But the VLAN was recently configured on the switch in question, a Cisco 3750. The DHCP server is handing out addresses on that VLAN with no problem. I have verified the cable between the host and switch and tried multiple hosts, but none of them can communicate or get an address. I plugged my laptop into an empty port which had a different VLAN assigned and immediately got a DHCP address. When I changed that port to the same VLAN I'm having issues with I got the same problem. The laptop just sits there and tries to DHCP an address but nothing happens. I double checked the cores and their Layer 3 VLAN config and its fine too. Plus I figured the issue couldn't be with them because the VLAN works fine everywhere else it exists. So the only other thing I can think of is the switch, but the VLAN exists on the switch and seems to be configured correctly. The trunks appear to be configured just fine as well too. Anyone have any ideas? I'm lost on this one.

    Read the article

  • Capabilities of business and SOHO routers

    - by Q8Y
    I'm currently studying for the CCNA certifications (especially for Cisco routers and configuration). I know that business routers provide more features than SOHO routers, the processing speed and RAM can be enough. Assume I need to connect a number of users through a network (accessing internet, share files, printers, ...). I have a high speed connection to the internet and I already applied QoS. How can I find out how many users such a single (SOHO) router could handle? In my case I'd attach to it multiple switches until I have the number of ports needed. Would everything work well and smoothly with 50 users? What about 300? At which point would I need a business router instead? If I implemented VLAN here, would it make any difference in the performance? When do I really need to use more than one router? (Both SOHO and business) I'm thinking that I may need them only if I want to increase the performance (instead of replacing the existing one) and if I have multiple locations, so in this situation I need to have multiple routers, right? Put differently: Is there is a need to have another router if my business all in one place?

    Read the article

  • Using a nat rule to translate 80/443 traffic to web server, but internal users cannot access it using external ip/domain name

    - by Josh
    I am using Cisco ASDM for ASA I have my internal network called soa. My outside interface is called outside. Let's say my outside IP given to me by my ISP isp is y.y.y.y I have a web server inside my network with a static ip of x.x.x.110. I have configured 2 static nat rules (one for http the other for https). Source is x.x.x.110. Interface is outside, service (http or https). Maybe I am doing this wrong, but when I run the packet tracer, I choose outside interface and for the source IP I used 8.8.8.8 and the destination ip is my outside IP address, y.y.y.y When I run that, it shows the packet traversing successfully, using 9 steps. For my other test, I switch to the soa interface, input an ip on that network, and leave the destination the same. This test comes up with 2 steps and then fails on my access list. When I see the rule that fails, it is my catch all which is source: any desitnation: any, service: ip action: deny. What rule do I need to make to allow my soa network access to go out and come back in by my external IP addess (using a domain name attached to that ip in my dns, of course)?

    Read the article

  • Port mirroring on multiple switches

    - by Matt
    So here is the deal, I have a server on switch A where port 3 is monitoring traffic for most of the ports on switch A. However I have other users on switch B that needs to have port 3 on switch A monitor as well. Is this possible? I have been reading about rspan but doesnt seem to work. Switch A: monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 (this works great for switch A, I need a solution to get switch B to also have some ports sent to port 3 on switch A for monitoring.) Onxx, All the traffic on switch A is fine, there will be about 10-15 ports on switch B that I need to send to fa0/3 on switch A as the destination. I have the switches connected with a ethernet cable with a trunk port on both switches on port 48 on switch B and A and port 47 on A connects to our sonicwall. So I am assuming they are daisy chained? What if I did the following: Switch A monitor session 1 source interface fast0/1 - 2 monitor session 1 source interface fast0/4 - 46 monitor session 1 destination interface fast0/3 Put all of the ports on vlan 10 because I made an rspan vlan 10 On switch B monitor the ports I need will say 1-10 monitor session 1 source interface fast0/1 - 10 monitor session 1 destination remote vlan 10 as a prerequisite I would have created vlan 10 as a rspan vlan on switch B. Switch A Monitor session 1 destination remote vlan 10 Would this work? By the way I am working with cisco catalyst 3560 switches.

    Read the article

  • Outdoor WiFi Mesh Topology vs. Repeaters

    - by IronJaxor
    Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

    Read the article

  • ASA access lists and Egress Filtering

    - by Nate
    Hello. I'm trying to learn how to use a cisco ASA firewall, and I don't really know what I'm doing. I'm trying to set up some egress filtering, with the goal of allowing only the minimal amount of traffic out of the network, even if it originated from within the inside interface. In other words, I'm trying to set up dmz_in and inside_in ACLs as if the inside interface is not too trustworthy. I haven't fully grasped all the concepts yet, so I have a few issues. Assume that we're working with three interfaces: inside, outside, and DMZ. Let's say I have a server (X.Y.Z.1) that has to respond to PING, HTTP, SSH, FTP, MySQL, and SMTP. My ACL looks something like this: access-list outside_in extended permit icmp any host X.Y.Z.1 echo-reply access-list outside_in extended permit tcp any host X.Y.Z.1 eq www access-list outside_in extended permit tcp any host X.Y.Z.1 eq ssh access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp access-list outside_in extended permit tcp any host X.Y.Z.1 eq ftp-data established access-list outside_in extended permit tcp any host X.Y.Z.1 eq 3306 access-list outside_in extended permit tcp any host X.Y.Z.1 eq smtp and I apply it like this: access-group outside_in in interface outside My question is, what can I do for egress filtering? I want to only allow the minimal amount of traffic out. Do I just "reverse" the rules (i.e. the smtp rule becomes access-list inside_out extended permit tcp host X.Y.Z.1 any eq smtp ) and call it a day, or can I further cull my options? What can I safely block? Furthermore, when doing egress filtering, is it enough to apply "inverted" rules to the outside interface, or should I also look into making dmz_in and inside_in acls? I've heard the term "egress filtering" thrown around a lot, but I don't really know what I'm doing. Any pointers towards good resources and reading would also be helpful, most of the ones I've found presume that I know a lot more than I do.

    Read the article

  • How do I connect to and factory reset a Catalyst 3560 Switch?

    - by Josh
    My company just bought another company. In their server room they had some older hardware, which I would like to repurpose. One of these is a Cisco Switch: C3560G-48TS-S. I found some instructions about this switch here but this is not a guide for a beginner. I have no idea how to connect to this thing to begin running the commands. It says Configure the PC terminal emulation software for 9600 baud, 8 data bits, no parity, 1 stop bit, and no flow control. But I can't find anything on how to do this (assuming with telnet?) or even what program to use. I also don't know how to find the IP address of the device to connect to it. My research also says once I get in there, I need to run clear config all Is this the right command? Also, what if I can't get the username and password for these devices? Is there some way to factory reset (my only experience is with devices that have a hardware reset button) EDIT: I should note that when I push the button on the front the three lights blink, which according to the documentation indicated the switch is configured and "not available for express setup"

    Read the article

  • Live search/filter as you type in client approach

    - by Pinoniq
    As an exercise for myself to practice my JavaScript "skills" I'm trying to write a client-side filter. It should be able to filter "content blocks" as the user types. By "content block", I mean a list of DomElements that each contain at least one text node - it is possible that they contain more, and even a different amount of text nodes, nested inside other nodes, etc. I've thought of 2 approaches: On page initialization, scan all nodes and store all the text in some kind of Map or a tree. Simply iterate over every item and check whether it has the string to search/filter for. One could add performance here by caching, only filtering the current remaining items if text is added, etc. Obviously, if the number of nodes is really big, option 1 will take a while to build the 'index' but it will perform faster once it is built. Option 2 however will be available right on page load since no initialization is performed. But of course it will take longer to search. So my question is: what is the best approach here? And how would one implement 'caching' and/or 'index'?

    Read the article

  • Oracle Java ME Embedded Client 1.1????

    - by sasa
    6?26???????????Java ME????????Oracle Java ME Embedded Client (OJEC) 1.1???????????CDC 1.1.2?Foundation Profile (FP) 1.1.2???????????ARM, MIPS, x86?Linux???????????Security Optional Package, RMI, JDBC, XML API, Web Services?????????????????????????????·???????????? 2011?5???????1.0??????????????XML API???????????????????????????????????????????x86?????????????x86????????Just-in-Time (JIT)?????????????? ?????????????????????(????GUI??)??????????????Linux (x86)?JDK 6?????????????????????? CPU OS ROM RAM ARM (v5) Linux 2.6.31??, glibc 2.10.2?? 5MB?? 8MB?? ARM (v6, v7) Linux 2.6.35??, glibc 2.12.1?? 5MB?? 8MB?? MIPS (MIPS32 74K) Linux 2.6.22??, glibc 2.8?? 5MB?? 8MB?? x86 (Pentium III??) Linux 2.6.35??, glibc 2.12.1?? 5MB??  8MB?? OJEC 1.1??????????????OTN??????????????????????????????????????Java Embedded??????????? OJEC 1.1 ?????? OJEC 1.1 ??????

    Read the article

  • How to get the client ip address in ASP.Net MVC?

    - by melaos
    hi guys, i'm totally new to the asp.net mvc stack and i was wondering what happened to the simple Page object and the Request ServerVariables object? basically what i wanted to do is to pull out the client's pc ip address. but i fail to understand how the current MVC structure has changed all of this. as far as i can understand, most of the variable object has been replaced by the HttpRequest variants? anybody care to share some resources? really a sea of stuff to learn in the asp.net mvc world :) thanks.

    Read the article

  • Can I use ruby rest-client to POST a binary file to an http API?

    - by Angela
    I have been using rest-client in ruby in post XML to a third-party API. I need to be able to include a binary image that's uploaded. How do I do that? Uploading Attachments Both letters and postcards will, in most cases, require the attachment of documents. Those attachments might be PDFs in the case of letters or images in the case of postcards. To uploading an attachment, submit a POST to: http://www.postful.com/service/upload Be sure to include the Content-Type and Content-Length headers and the attachment itself as the body of the request. POST /upload HTTP/1.0 Content-Type: application/octet-stream Content-Length: 301456 ... file content here ... If the upload is successful, you will receive a response like the following: 290797321.waltershandy.2

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >