Search Results

Search found 11380 results on 456 pages for 'cpu speed'.

Page 92/456 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• For Intel cpu , if chipset and motherboard are also from intel then it will give best performance. I

  - by metal gear solid

  I'm going to purchase Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) and for motherboard my local vendor suggesting me to purchase Intel DG41RQ MB motherboard and he is also saying if i'm purchasing Intel CPU then purchasing Intel's Own motherboard with intel chipset will give best performance. Is it true? To get good inbuilt graphic I'm thinking to purchase nvidia chipset based motherboard of any other company like Asus, Gigabyte, MSi etc. is it ok? Although i never play games on my PC but thinking Inbuilt Nvidia graphics will be better for running Photoshop and watching movies then Intel's inbuilt graphics. or it's ok to purchase Intel DG41RQ MB motherborad as suggested by local vendor. Intel's inbuilt graphics would be enough for Photoshop and Watching movies. If you know any other good motherboard for Intel® Core™2 Duo Processor E7500 (3M Cache, 2.93 GHz, 1066 MHz FSB) then tell.

  Read the article

• How can I reduce the CPU usage of Offline Files?

  - by Diego

  Whenever I have the Offline Files service running, there is a constant 25% CPU usage on svchost.exe (this is a quad core, so that means it's using up one core). This, in turn, triples the power consumption and keeps the machine hot... I do have several GB synchronized (music collection), but they are not changing at all, in either side. Am I misusing this feature? Is there anything I can configure to keep it down when there's nothing to do? Or should I forget about it and synchronize big folders manually?

  Read the article

• Power supply issue? New Radeon5850's fan runs at full speed and PC doesn't boot.

  - by Kris

  I recently bought a new ASUS EAH5850 graphics board. I installed it a custom PC which had an ASUS p5n-e SLI mobo along with a 500w Thermaltake W0093RU power supply. Sometimes when doing a cold boot the 5850's fan will run at full speed and the PC will not boot. Powering off by holding down the power button and powering back on sometimes remedies the situation and everything boots normally. Warm reboots also never seem to have problems. For some reason though cold boots almost always do. Another issue I notice is that when the PC does boot normally it takes longer (+30 secs) to POST than with my last video card. I flashed the mobo with the latest available BIOS but it had no effect. Is my problem a power issue or incompatible motherboard or something else I'm missing?

  Read the article

• Rsync over NFS with QoS: How to view real transfer speed?

  - by Ian Mackinnon

  We have a bandwidth limit between a Linux server and a NAS, created using 'tc' with an IP filter. When writing to an NFS mount of the NAS, rsync claims a very high transfer speed for each file and then waits a long time before acknowledging that everything has finished. The total time taken is consistent with the QoS limit and the time taken by the same transfer over FTP. Why does the write to the NFS mount report higher transfer speeds than are actually happening over the network? How can I monitor the actual bandwidth of the transfer?

  Read the article

• Good free software to track and graph memory and CPU usage on Windows?

  - by TheLQ

  There are many questions on Linux memory tracking, but I haven't seen any for Windows. In my case however its a Windows XP Pro box I need to track the memory and CPU usage of. The reason I need it is due to a server program I'm trying that is eating all my processor and some of my memory which is freezing my RDP session and System Explorer and even makes it difficult to login physically. As this is a very constrained server I'm working off of (768 MB RAM with Pentium 4 which disappears with this program), I need a program that doesn't run/require a webserver. I can give it a MySQL database if necessary however. Is there any suggestions for such a program?

  Read the article

• What is the computer "doing" when it is running slow and task manager is not showing any CPU activity?

  - by Joakim Tall

  Typical example is when shutting down a memoryintensive application. It can take quite a while before the computer gets back up to speed. Is there some inherent cost in releasing memory? Or is it throttled by some kind of harddrive activity, and if so is there any good way to track that? I usually bring up task manager when a computer is running slow, and usually sorting by cpu activity can show what process is causing the problem, but sometimes there is no activity showing. And yes I "show processes from all users", I have been wondering this since the days win2k :)

  Read the article

• Do I need a Gigabit router with a 24MB/s down and 7MB/s upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24MB/s down and 7MB/s upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 MB/s port can easily handle it. Is that true?

  Read the article

• How to calculate required switch speed based on network usage?

  - by tobefound

  I have a 48 port HP Procurve Switch 2610 (J9088A) that can handle 13.0 million PPS (packets per second) and features wire speed switching capacity at 17.6Gbps. First off, what does that REALLY mean? Where do I start when trying to figure out if my office (with 70 employees) will be well setup with this switch? How to calculate through-put based on a user average load of X MB per day? 90% of the folks will only be sending email, access random websites, etc... the other 10% will be conducting heavier tasks like moving image files (10 MB) across network shares, constant external FTP streams through the switch to a server etc... Is this switch good enough?

  Read the article

• Use ImageMagick to convert TIFF to PNGs, how to improve the speed?

  - by Woo

  I am using "convert" from IM to get PNGs from multi-page TIFF files, everything is good except the speed. From "convert" documentation, I found: For the MNG and PNG image formats, the quality value sets the zlib compression level (quality / 10) and filter-type (quality % 10). For compression level 0, the Huffman-only strategy is used, which is fastest but not necessarily the worst compression. The default PNG compression is 75. So I tried "-quality 0", but almost no changes with the spreed. Anyone can share the ideas of how to improve the spreed? Here are my command: convert 100Pages.tif[0,1,2,3,4,5] -quality 0 100Pages.png Thanks!

  Read the article

• Terminal runs svn commands very slowly, how can I speed this up?

  - by Paul

  Spending all day in terminal is beginning to get frustrating. We're working with large CakePHP projects, including a ton of schema files and complex controllers. Whenever I go into a project, and enter svn up, or svn ci my system chokes. It takes a good 15-30 seconds before it returns what revision number I'm on. I'm running OSX 10.6 on a Macbook Pro. Any reasoning behind this? Anyway I could fix this speed issue?

  Read the article

• Terminal runs svn commands very slowly, how can I speed this up?

  - by Paul

  Spending all day in terminal is beginning to get frustrating. We're working with large CakePHP projects, including a ton of schema files and complex controllers. Whenever I go into a project, and enter svn up, or svn ci my system chokes. It takes a good 15-30 seconds before it returns what revision number I'm on. I'm running OSX 10.6 on a Macbook Pro. Any reasoning behind this? Anyway I could fix this speed issue?

  Read the article

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Why does my HDD produce a high-pitched noise when the CPU is in use?

  - by CyberOptic

  I know this is strange. Some time ago, I bought a new 7200rpm HDD for my desktop system (I'll look for the model later). Every time the CPU is used, a high frequency cheep comes from the HDD. I'm sure it's the HDD because the problem does not occur if the HDD is not attached or is in energy-saving mode (I cross-checked by booting from a live CD). What could be the reason for the cheep sounds? Could it be the power supply?

  Read the article

• Not getting my normal internet speed but my other computers can?

  - by Dennis

  I have Comcast Xfinity and I cannot reach anywhere near my promised speed. My family desktop which is hardwired into the router reaches to 60Mbps and so do my parents computers and my brothers. I cannot seem to get anywhere close to it, I know with being wireless I won't reach it, but I should at least get somewhere close. I can only pull 6Mbps and thats terrible for what I should be receiving. Any clue what could be wrong here? Edit: I have 100% signal and I'm not behind any walls

  Read the article

• HP Pavilion dv6 overheating, how do I set fan speed to 100% all the time?

  - by henpenben

  So I have a HP Pavilion dv6, and it works fine. But when I play, say, Minecraft, the temperature jumps to around 60c-70c. I wouldn't be bothered by this, but I bought this computer and played Minecraft on my lap. The laptop overheated and the video card melted. (I'm not kidding) So I was wondering how I could set the fan speed on my laptop to 100% all the time so it never overheats. HP has this "HP Coolsense" thing that when I pick up the laptop and wiggle it around a little bit and pretend it's unstable, the fan cranks up to 100%. I want 100% all the time without me having to pick up the laptop every 10 minutes. Thanks, henpenben

  Read the article

• How can I speed up a MySQL retore from a dump file?

  - by Dave Forgac

  I am restoring a 30GB database from a mysqldump file to an empty database on a new server. When running the SQL from the dump file, the restore starts very quickly and then starts to get slower and slower. Individual inserts are now taking 15+ seconds. The tables are MyISAM. The server has no other active connections. SHOW PROCESSLIST; only shows the insert from the restore (and the show processlist itself). Does anyone have any ideas what could be causing the dramatic slowdown? Are there any MySQL variables that I can change to speed the restore while it is progressing?

  Read the article

• Does the .NET Framework need to be reoptimized after upgrading to a new CPU microarchitecture?

  - by Louis

  I believe that the .NET Framework will optimize certain binaries targeting features specific to the machine it's installed on. After changing the CPU from an Intel Nehalem to a Haswell chip, should the optimization be run again manually? If so, what is the process for that? Between generations here are some notable additions: Westmere: AES instruction set Sandy Bridge: Advanced Vector Extensions Ivy Bridge: RdRand (hardware random number generator), F16C (16-bit Floating-point conversion instructions) Haswell: Haswell New Instructions (includes Advanced Vector Extensions 2 (AVX2), gather, BMI1, BMI2, ABM and FMA3 support) So my, albeit naive, thought process was that the optimizations could take advantage of these in general cases. For example, perhaps calls to the Random library could utilize the hardware-RNG on Ivy Bridge and later models.

  Read the article

• How Can I Speed Up Terminal.app or iTerm on Mac OSX?

  - by pmaiorana

  Every time I launch either iTerm or Terminal after not using it for a few hours, it takes anywhere from 10-20 seconds to return a prompt. The screen is blank, and although I can type I can't actually run any commands. If I quit either application, subsequent launches (if done relatively soon thereafter) are quite fast. The slowness only seems to occur if the app wasn't running for a few hours. I'm running OSX 10.5.7 on a MacBookPro. I have the exact same setup on another computer, with no slow downs. Any ideas how to speed things up again?

  Read the article

• How can I speed up a MySQL restore from a dump file?

  - by Dave Forgac

  I am restoring a 30GB database from a mysqldump file to an empty database on a new server. When running the SQL from the dump file, the restore starts very quickly and then starts to get slower and slower. Individual inserts are now taking 15+ seconds. The tables are MyISAM. The server has no other active connections. SHOW PROCESSLIST; only shows the insert from the restore (and the show processlist itself). Does anyone have any ideas what could be causing the dramatic slowdown? Are there any MySQL variables that I can change to speed the restore while it is progressing?

  Read the article

• Will readyboost speed up a secondary partion or harddrive?

  - by Sebastian

  I'm building a new computer and plan on using a few spare USB sticks with readyboost to cache disk writes. I'll be running Windows 7 Enterprise SP1 x64 I have a single 2 TB disk, and plan to make a partition for windows (100 GB) and use the rest for data. I know Readyboost will work nicely for the C drive, but am unable to find any information on whether it will accelerate a second drive or partition. Just to clarify, I'm NOT trying to use the harddrive instead of the usb sticks. I'm trying to speed up the second partition using the USB sticks So, will readyboost work for a secondary partion or harddrive?

  Read the article

• Why does the heat production increase as the clockrate of a CPU increases?

  - by Nils

  This is probably a bit off-topic, but the whole multi-core debate got me thinking. It's much easier to produce two cores (in one package) then speeding up one core by a factor of two. Why exactly is this? I googled a bit, but found mostly very imprecise answers from over clocking boards which do not explain the underlying Physics. The voltage seems to have the most impact (quadratic), but do I need to run a CPU at higher voltage if I want a faster clock rate? Also I like to know why exactly (and how much) heat a semiconductor circuit produces when it runs at a certain clock speed.

  Read the article

• Netlogo Programming question - Chemical Equilibrium temperature and pressure implementation

  - by user286190

  Hi I am trying to code something in Netlogo..I am using an existing model Chemical Equilibrium and am trying to implement the following: turtles-own [speed ] ask turtles [ ;; set velocity ( ambient-temperature = 30 ) ;; fd velocity if temp > 40 [ "speed" increases of turtles ] ifelse temperature < 30 [ speed of turtles decreases] ] ;; to temp but it does not seem to work (it temperature is more than 40 the speed of the turtles increases if the temperature is less than 30 the speed of the turtles decreases) temperature is a slider on the model the same for pressure ask turtles [ ;; if pressure > 50 then speed increases of turtles ;; if pressure < 50 then speed decreases of turtles ] ;; to pressure thanks

  Read the article

• Ubuntu 12.04 on MAC Mini G4

  - by Buford Speed

  I have a MAC Mini G4. I would like to install Ubuntu on it. I have looked at this Q&A Mac G4 with no OS: can Ubuntu be used?, and I have a question. Is it worth the hassle to install Ubuntu, or should I keep MAC OS. The unit has MAC OS 10.4 (Tiger). It is used for normal day to day operations, word processing, spreadsheets, browsing, and keeping track of finances. I'd like to install Ubuntu if I can. So is it possible?

  Read the article

• Shotwell issues in 11.10

  - by John Speed

  I had used Shotwell happily previously then updated to Natty last week. Despite Shotwell showing on the tool bar on screen, when clicked, nothing happened, and it ignored my SD card when loaded. I read all sorts of remedies and tried everything to no avail. When I next turned on the laptop, Ocelot was available so with nothing to loose, I upgraded again. Still no Shotwell. Tried all the new fixes and now atleast I have the icon pictures but nothing behind it. When I ran the command to load the log file, Shotwell loaded and all my photos are present. Exited programme, and now nothing. Can anyone tell me where I have gone wrong please.

  Read the article

• Shotwell not available in 11.10

  - by John Speed

  I had used Shotwell happily previously then updated to Natty last week. Despite Shotwell showing on the tool bar on screen, when clicked, nothing happened, and it ignored my SD card when loaded. I read all sorts of remedies and tried everything to no avail. When I next turned on the laptop, Ocelot was available so with nothing to loose, I upgraded again. Still no Shotwell. Tried all the new fixes and now atleast I have the icon pictures but nothing behind it. When I ran the command to load the log file, Shotwell loaded and all my photos are present. Exited programme, and now nothing. Can anyone tell me where I have gone wrong please.

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >