Search Results

Search found 103827 results on 4154 pages for 'dani am'.

Page 92/4154 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• What is the difference between the Lego Mindstorms 1.0 and 2.0

  - by Gavimoss

  I am thinking about buying a mindstorms kit (I don't currently own one but I have used 1.0 at university) and I am a bit unsure as to the benefits of 2.0 over 1.0. I have seen other posts on the subject all saying generally 2.0 is better but I have some more specific questions about this that I can't seem to find any answers on. Apart from the different lego pieces and sensors you get with the 2.0 kit, is there any difference between a 1.0 nxt brick and 2.0 nxt brick? From what I can determine from other sources, they are the same except for the firmware installed. Am I right in saying I could buy a 1.0 kit and install the same firmware that comes with the 2.0 kit and the bricks would be the same or is the 1.0 brick not compatible with the 2.0 firmware??? Also, I plan to use a different programming language like c or java so I need to install specific firmware for that anyway like librcx or lejos right? So if using c or java as opposed to the provided lego coding methods it doesn't matter if I am using 1.0 or 2.0 (except for the lego pieces in the kit) am I right? In a nutshell, assuming I am using librcx or lejos and I don't care about the sensors and lego pieces included, is there any benefit to buying a 2.0 kit over the 1.0 kit? Thanks in advance

  Read the article

• Castle Windsor with ASP.NET MVC 2 Areas

  - by Doug Shontz

  Been lurking for a few months and decided to jump in with a question. I am very new to Windsor and IoC in general. I can get Windsor to work with my MVC2 project with no problem. The project I am working on is a "portal" of multiple applications under one MVC2 project using the new Areas concept. In this scenario, each Area will actually be a separate application inside the "portal". We are doing this to effectively share a LOT of common code, views, authentication, and cross-application functionality. Many of our apps link to one another, so it made sense after discussing it to combine them into one project. What I am wondering how to do is actually allow different Areas to inject different concrete classes? In my limited understanding, the Application_Start is governing building the container and assigning it as the controller factory. I don't necessarily want to do all the injection at the application level. We have a config system where we have a config.xml at the root of every Area and those settings override any root settings. I would like to continue that trend by having the injections for each Area be read by the Area's config.xml (an inheritance similar to Webforms web.config where the config in a lower folder overrides settings in a parent folder). Example: I would have an ILogHandler which would need a different concrete implementation depending on which Area of the application I am in. So I would need to inject something different depending on where I am at in the application. I can easily do this using factories since each area could have it's own set of factories, but I am attempting to take this opportunity to learn about IoC and what the benefits/drawbacks are. Any help would be appreciated.

  Read the article

• Regex query: how can I search PDFs for a phrase where words in that phrase appear on more than one l

  - by Alison

  I am trying to set up an index page for the weekly magazine I work on. It is to show readers the names of companies mentioned in that weeks' issue, plus the page numbers they are appear on. I want to search all the PDF files for the week, where one PDF = one magazine page (originally made in Adobe InDesign CS3 and Adobe InCopy CS3). I have set up a list of companies I want to search for and, using PowerGREP and using delimited regular expressions, I am able to find most page numbers where a company is mentioned. However, where a company name contains two or more words, the search I am running will not pick up instances where the name appears over more than one line. For example, when looking for "CB Richard Ellis" and "Cushman & Wakefield", I got no result when the text appeared like this: DTZ beat BNP PRE, CB [line break here] Richard Ellis and Cushman & [line break here] Wakefield to secure the contract. [line end here] Could someone advise me on how to write a regular expression that will ignore white space between words and ignore line endings OR one that will look for the words including all types of white space (ie uneven spaces between words; spaces at the end of lines or line endings; and tabs (I am guessing that this info is imbedded somehow in PDF files). Here is a sample of the set of terms I have asked PowerGREP to search for: \bCB Richard Ellis\b \bCB Richard Ellis Hotels\b \bCentaur Services\b \bChapman Herbert\b \bCharities Property Fund\b \bChetwoods Architects\b \bChurch Commissioners\b \bClive Emson\b \bClothworkers’ Company\b \bColliers CRE\b \bCombined English Stores Group\b \bCommercial Estates Group\b \bConnells\b \bCooke & Powell\b \bCordea Savills\b \bCrown Estate\b \bCushman & Wakefield\b \bCWM Retail Property Advisors\b [Note that there is a delimited hard return between each \b at the end of each phrase and beginnong of the next phrase.] By the way, I am a production journalist and not usually involved in finding IT-type solutions and am finding it difficult to get to grips with the technical language on the PowerGREP site. Thanks for assistance Alison

  Read the article

• JPA/JDO entity to XML XSD generator.

  - by h2g2java

  I am using JDO or JPA on GAE plugin in Eclipse. I am using smartgwt datasource, accepting an xsd. I would like to be educated how to generate an XSD from my jdo/jpa entity, vice versa. Is there a tool to do it? While datanucleas does all its magic enhancing in the Eclipse background, would I be able to somehow operate in a mode that would generate XSDs for me? Can Hibernate operate in an offline mode, to solely help me generate XSDs which I could use in GWT without deploying hibernate with my web-app? Can Hibernate even be capable of generating XSDs from entities, vice versa? Currently, I am about to write a utility to generate an xsd, given an entity class - but I am hoping I don't have to reinvent the wheel if it already exists. I am hoping people here could educate me on any available tools to ease my XSD generation. But btw, I am very wary of anything that uses Maven, because most people (like Spring) who write the Maven scripts and pom don't have the expertise to write it in a way that would spew out messages and verbosity appropriately to make it easy for me to locate model errors.

  Read the article

• Unmanaged DLL in C# Web Service

  - by Telis

  Hi Guys, please help µe as I am new into accessing an unmanaged DLL from C#.. I have a large unmanaged DLL in C++ and I am trying to access the DLL's classes and functions from a C# Web Service. I have seen many examples how to use DLLImport, but for some reason I am stuck with my very first wrapper method spending many hours with no luck.. What should I do to return an object in my 'Marshaled' [DllImport..] function? I would like to do something like that: [DllImport("unmanaged.dll")] public static extern MyClass MyFunction(); Here is the definition of my C++ class and the function that I want to access: class __declspec(dllexport) TPDate { public: TPDate(); TPDate(const TPDate& rhs); ... //today's date. static TPDate AsOfDate(void); ... } In my Web service I have declared the following StructLayout: [StructLayout(LayoutKind.Sequential)] public class TPDate { public TPDate(TPDate d) { _tpDate = d; } public TPDate _tpDate; } and here's where I think that I'm not doing something right: class WrapperTPDate { [DllImport("TPTools.dll", ExactSpelling=false, EntryPoint = "?AsOfDate@TPDate@@SA?AV1@XZ", CallingConvention = CallingConvention.StdCall)] [return: MarshalAs(UnmanagedType.Struct)] **public static extern TPDate AsOfDate();**// HERE THERE IS PROBLEM }; I am calling the wrapper as follows from my WebMethod: [WebMethod] public void ConstructModel() { TPDate date1 = WrapperTPDate.AsOfDate();// Here I get exception TPDate date = new TPDate(date1); } The exception i am getting is: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.Runtime.InteropServices.MarshalDirectiveException: Cannot marshal 'return value': Invalid managed/unmanaged type combination (this type must be paired with LPStruct or Interface). If I change it to LPSTRUCT, I am getting another exception: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt Could you please tell me where I'm doing wrong here Thanks

  Read the article

• DDD principlers and ASP.NET MVC project design

  - by kaivalya

  Two part questions I have a product aggregate that has; Prices PackagingOptions ProductDescriptions ProductImages etc I have modeled one product repository and did not create individual repositories for any of the child classes. All db operations are handled through product repository. Am I understanding the DDD concept correctly so far? Sometimes the question comes to my mind that having a repository for lets say packaging options could make my life easier by directly fetching a the packaging option from the DB by using its ID instead of asking the product repository to find it in its PackagingOptions collection and give it to me.. Second part is managing the edit create operations using ASP.MVC frame work I am currently trying to manage all add edit remove of these child collections of product through product controller(sound right?). One challenge I am now facing is; If I edit a specific packaging option of product through mydomain/product/editpackagingoption/10 I have access to the id of the packaging option But I don't have the ID of the product it self and this forces me to write a query to first find the product that has this specific packaging option then edit that product and the revelant packaging option. I can do this as all packaging option have their unique ID but this would fail if I have collections that don't have unique ID. That feels very wrong.. The next option I thought of is sending both the product and packaging option IDs on the url like; mydomain/product/editpackagingoption/3/10 But I am not sure if that is a good design either. So I am at a point that I am a bit confused. might be having fundamental misunderstandings around all of this... I would appreciate if you bear with the long question and help me put this together. thanks!

  Read the article

• Implementing BindingList<T>

  - by EtherealMonkey

  I am trying to learn more about BindingList because I believe that it will help me with a project that I am working on. Currently, I have an object class (ScannedImage) that is a subtype of a class (HashedImage) that subtypes a native .Net object (Image). There is no reason why I couldn't move the two subtypes together. I am simply subtyping an object that I had previously constructed, but I will now be storing my ScannedImage object in an RDB (well, not technically - only the details and probably the thumbnail). Also, the object class has member types that are my own custom types (Keywords). I am using a custom datagridview to present these objects, but am handling all changes to the ScannedImage object with my own code. As you can probably imagine, I have quite a few events to handle that occur in these base types. So, if I changed my object to implement INotifyPropertyChanged, would the object collection (implementing BindingList) receive notifications of changes to the ScannedImage object? Also, if Keywords were to implement INotifyPropertyChanged, would changes be accessible to the BindingList through the ScannedImage object? Sorry if this seems rather newbish. I only recently discovered the BindingList and not having formal training in C# programming - am having a difficult time moving forward with this. Also, if anyone has any good reference material, I would be thankful for links. Obviously, I have perused the MSDN Library. I have found a few good links on the web, but it seems that a lot of people are now using WPF and ObservableCollection. My project is based on Winforms and .Net3.5 framework. TIA

  Read the article

• Problem with UIScrollView

  - by leon

  Hi, Sorry for long winded post. I am trying to understand UIScrollView and running into very simple problem. I am creating a scroll view I am making this view 1.5 size larger then normal size Using UIScrollView I expect to see some edge elements of view out of bounds, but should be able to pan the view therefore bringing missing elements back to the visible area. However I am seeing that I can't just pan/scroll view anyway I want, instead view always wants to scroll up, as soon as move away my finger from the screen (touch end event). I am not handling any touches, etc - I just want to understand why does not scaled view stay put where I scroll it? CGRect viewFrame = self.view.frame ; viewFrame.size.width *= 1.5; viewFrame.size.height *= 1.5; CGSize mySize = viewFrame.size; [ ((UIScrollView *) self.view) setContentSize: mySize]; self.view.transform = CGAffineTransformMakeScale(1.5, 1.5); What I really trying to accomplish is something similar to Number on iPad (the same code will work on iPhone): There is a view with lots of controls on it (order entry form) User can zoom into the entire form so all elements look bigger user can pan the form therefore bringing various elements into the visible area of the screen. It seems that UIScrollView can should be able to handle zoom and pan actions (for now I am using Affine Transform to zoom in to the order entry form and iPad) Thanks

  Read the article

• Http Requests POST vs GET

  - by behrk2

  Hi everyone, I am using a lot of HTTP Requests in an application that I am writing which uses OAuth. Currently, I am sending my GET and POST requests the same way: HttpConnection connection = (HttpConnection) Connector.open(url + connectionParameters); connection.setRequestMethod(method); connection.setRequestProperty("WWW-Authenticate", "OAuth realm=api.netflix.com"); int responseCode = connection.getResponseCode(); And this is working fine. I am successfully POSTing and GETing. However, I am worried that I am not doing POST the right way. Do I need to include in the above code the following if-statement? if (method.equals("POST") && postData != null) { connection.setRequestProperty("Content-type", "application/x-www-form-urlencoded"); connection.setRequestProperty("Content-Length", Integer .toString(postData.length)); OutputStream requestOutput = connection.openOutputStream(); requestOutput.write(postData); requestOutput.close(); } If so, why? What's the difference? I would appreciate any feedback. Thanks!

  Read the article

• Comet Jetty/Tomcat, having some browser issues with Firefox and Chrome

  - by ages04

  I am exploring the use of Comet for a project I am working on. I tried creating a test application first using Tomcat6 and CometProcessor API and then with Jetty7 Continuations. The application is kind of working on both but I am having some issues with the actual display of messages. I used the technique of creating an XMLHttpRequest Connection and keeping it open all the time so the server can continuously push data to all the clients connected whenever it is available. My client side code is something similar to this: function fn(){ var xhr = new XMLHttpRequest(); xhr.onreadystatechange = function(){ if (xhr.readyState==3){ document.getElementById('dv').innerHTML =(xhr.responseText); } if (xhr.readyState==4){ alert ('done'); } } xhr.open("GET", "First", true); xhr.send(null); } I found this thing of using readyState 3 somewhere online. I am facing 2 problems currently: In Firefox this code works perfectly. But if I open a new tab or even a new browser window, it does not make a new connection to the server and nothing shows up on the new tab or window, only the first tab/window gets the display. I used wireshark to check this and its shows only 1 connection even after the 2nd tab is opened. I am unable to understand why this would happen. I have read about the 2 connection limit, but here there is only one connection. Secondly in Chrome, the above code does not work, and the callback is not invoked for readystate of 3, only when the connection is closed by the server i get the output. I would also like to ask which is the best way/framework for doing Comet with Java. I am currently using jQuery on the client side. Any suggestions would be greatly appreciated!! Thanks

  Read the article

• extract specific element from nested elements using lxml html

  - by Dan.StackOverflow

  Hi all I am having some problems that I think can be attributed to xpath problems. I am using the html module from the lxml package to try and get at some data. I am providing the most simplified situation below, but keep in mind the html I am working with is much uglier. <table> <tr> <td> <table> <tr><td></td></tr> <tr><td> <table> <tr><td><u><b>Header1</b></u></td></tr> <tr><td>Data</td></tr> </table> </td></tr> </table> </td></tr> </table> What I really want is the deeply nested table, because it has the header text "Header1". I am trying like so: from lxml import html page = '...' tree = html.fromstring(page) print tree.xpath('//table[//*[contains(text(), "Header1")]]') but that gives me all of the table elements. I just want the one table that contains this text. I understand what is going on but am having a hard time figuring out how to do this besides breaking out some nasty regex. Any thoughts?

  Read the article

• Making that move from junior > mid level

  - by dotnetdev

  Hi, Before I start, I know there is another thread about this very issue (http://stackoverflow.com/questions/2352874/moving-from-junior-developer-to-mid-level). I am in this very same situation, but of course every person and the company/employment-history is not the same. In my current company, I have not done one piece of coding from start to finish with the oversight of my manager and a Project Manager to manage the work/deadlines etc. I am basically an odd-jobs type of guy. The coding I do is on the side to whatever boring spreadsheet/word document I have to write. Very illogical that you're a coder and you're doing it in secret. In another job I had for 3 months (Was made redundant), it required 1 years experience, perhaps because of the fact I was the sole developer. It wasn't too hard, but then I was solely responsible and I learnt a lot from that. I had 2 other 3 months jobs (contracts), so I have been working for 1 year 9 months. I know found a job which I'm in the last stage for, which needs 3 years .NET experience and 2 years Sharepoint. How can I know if I am ready for this job? My current job has been going on for 1 year, but it doesn't mean squat apart from explaining how I have spent my time. It does not tell me what level I am at (apart from the huge skills gap I have opened up against my peers because I practise at home). So 1 year of doing nothing at work, but 1 year of doing loads at home. In fact, I take 1 week off and do more at home then in the company since I started. How can I know if I am ready for such a job? I am generally very confident given all I've achieved in coding, but I have no idea what a job with this sort of experience entails (what day-to-day-problems I would be facing). Is there any advice on how to handle this transition? Thanks

  Read the article

• Paging with Find using Active Record

  - by Brian Rizzo

  I can't seem to find an answer to this question or a good example of how to accomplish what I am trying to do. I'm sure it's been posted or explained somewhere, but I am having trouble finding the exact solution I need. I am using ActiveRecord in Subsonic 3.0.0.3. When I do something like recordset = VehicleModel.Find(x => x.Model.StartsWith(SearchText)); I get back an IList of VehicleModel objects (or more simply a recordset), this is fine until I return too many records. I also cannot order the returned set of records (my grid will do this fine, but i'm sure it will be too slow if i have too many records). Being that Find is returning an IList there isn't much that I can run directly against this (again I may be overlooking something simple so please don't kill me). My question is can someone explain how to find data like i am above, sort it and get a page of data where a page is of size n? Am I going about this wrong? Am I even close to being on the right track?

  Read the article

• android logging sdcard

  - by Abhi Rao

  Hello, With Android-Emulator I am not able to write/create a file on the SD Card (for logging). Here is what I have done so far - Run mksdcard 8192K C:\android-dev\emu_sdcard\emu_logFile - Create a new AVD, when assign emu_logFile to it so that when I view the AVD Details it says C:\android-dev\emu_sdcard\emu_logFile against the field "SD Card" - Here is the relevant code public class ZLogger { static PrintWriter zLogWriter = null; private static void Initialize() { try { File sdDir = Environment.getExternalStorageDirectory(); if (sdDir.canWrite()) { : File logFile = new File (sdDir, VERSION.RELEASE + "_" + ".log"); FileWriter logFileWriter = new FileWriter(logFile); zLogWriter = new PrintWriter(logFileWriter); zLogWriter.write("\n\n - " + date + " - \n"); } } catch (IOException e) { Log.e("ZLogger", "Count not write to file: " + e.getMessage()); } } sdDir.canWrite returns false - please note it not the exception from adb shell when I do ls I see sdcard as link to /mnt/sdcard. When I do ls -l /mnt here is what I see ls -l /mnt ls -l /mnt drwxr-xr-x root system 2010-12-24 03:41 asec drwx------ root root 2010-12-24 03:41 secure d--------- system system 2010-12-24 03:41 sdcard whereas if I go to the directory where I created emu_sdcard - I see a lock has been issued, as shown here C:dir android-dev\emu_sdcard Volume in drive C is Preload Volume Serial Number is A4F3-6C29 Directory of C:\android-dev\emu_sdcard 12/24/2010 03:41 AM . 12/24/2010 03:41 AM .. 12/24/2010 03:17 AM 8,388,608 emu_logFile 12/24/2010 03:41 AM emu_logFile.lock 1 File(s) 8,388,608 bytes 3 Dir(s) 50,347,704,320 bytes free I have looked at these and other SO questions Android Emulator sdcard push error: Read-only file system (2) Not able to view SDCard folder in the FileExplorer of Android Eclipse I have added the following to AndroidManifest.xml **uses-permission android:name="android.permission.WRITE_EXTERNAL_STORAGE" ** Please let me know your thoughts - what am I missing here? Why does canWrite return false? What should I do to add permissions to sdcard?

  Read the article

• Can't open Websphere Portal 7.0 Login Page after its integration with a custom user registry?

  - by jack_sparrow

  I am currently working on a project related to Websphere Portal 7.0 on Windows Server 2008 R2,64 bit. I am trying to integrate websphere portal with my custom user registry.I have completed all the steps required to implement custom user registry in portal as given in IBM documentation.I am adding my custom repository to the default federated repositories of Portal 7.0.I have made the required changes under VMM Federated CUR Properties section in wkplc.properties.I am using configengine.bat file to configure Portal with user registry. But even completing all the steps,when I am trying to open the Portal Login Page through http://ip-address:port_of_portal/wps/portal ,it is throwing an exception on the console: "Error 500: com.ibm.wps.resolver.data.exceptions.URIProcessingIOException: EJCBD0021E: The URI dav:fs-type1/themes/PageBuilder2/theme.html and parameters [['themeURI'=, 'mime-type'= could not be processed: [EJCBD0021E: The URI dav:fs-type1/themes/PageBuilder2/theme.html and parameters [['themeURI'=, 'mime-type'= could not be processed: EJPSG0002E: Requested Member does not exist.uid=portal,o=defaultWIMFileBasedRealm/null] " and in logs Systemout.log "EJPSB0005E: Exception occurred during creation of the principal with Name uid=portal,o=defaultWIMFileBasedRealm and Principal Type USER caused by com.ibm.portal.puma.MemberNotFoundException: EJPSG0002E: Requested Member does not exist.uid=portal,o=defaultWIMFileBasedRealm/null". Here,"portal" is administrative user in my custom user registry.I am able to access WAS using /ibm/console through user "portal".Please suggest some way to handle this issue.

  Read the article

• Serialization Performance and Google Android

  - by Jomanscool2

  I'm looking for advice to speed up serialization performance, specifically when using the Google Android. For a project I am working on, I am trying to relay a couple hundred objects from a server to the Android app, and am going through various stages to get the performance I need. First I tried a terrible XML parser that I hacked together using Scanner specifically for this project, and that caused unbelievably slow performance when loading the objects (~5 minutes for a 300KB file). I then moved away from that and made my classes implement Serializable and wrote the ArrayList of objects I had to a file. Reading that file into the objects the Android, with the file already downloaded mind you, was taking ~15-30 seconds for the ~100KB serialized file. I still find this completely unacceptable for an Android app, as my app requires loading the data when starting the application. I have read briefly about Externalizable and how it can increase performance, but I am not sure as to how one implements it with nested classes. Right now, I am trying to store an ArrayList of the following class, with the nested classes below it. public class MealMenu implements Serializable{ private String commonsName; private long startMillis, endMillis, modMillis; private ArrayList<Venue> venues; private String mealName; } And the Venue class: public class Venue implements Serializable{ private String name; private ArrayList<FoodItem> foodItems; } And the FoodItem class: public class FoodItem implements Serializable{ private String name; private boolean vegan; private boolean vegetarian; } IF Externalizable is the way to go to increase performance, is there any information as to how java calls the methods in the objects when you try to write it out? I am not sure if I need to implement it in the parent class, nor how I would go about serializing the nested objects within each object.

  Read the article

• Advice on coding Perl to work like PHP

  - by user272273

  I am first and foremost a perl coder, but like many, also code in PHP for client work, especially web apps. I am finding that I am duplicating a lot of my projects in the two languages, but using different paradigms (e.g. for handling cgi input and session data) or functions. What I would like to do is start to code my Perl in a way which is structured more like PHP, so that I a) am keeping one paradigm in my head b) can more quickly port over scripts from one to the other Specifically, I am asking if people could advise how you might do the following in perl? 1) Reproduce the functionality of $_SESSION, $_GET etc. e.g. by wrapping up the param() method of CGI.pm, a session library? 2) Templating library that is similar to PHP I am used to mixing my code and HTML in the PHP convention. e.g. i <h1>HTML Code here</h1> <? print "Hello World\b"; ?> Can anybody advise on which perl templating engine (and possibly configuration) will allow me to code similarly? 3) PHP function library Anybody know of a library for perl which reproduces a lot of the php inbuilt functions?

  Read the article

• Is is possible to populate a datatable using a Lambda expression(C#3.0)

  - by deepak.kumar.goyal

  I have a datatable. I am populating some values into that. e.g. DataTable dt =new DataTable(); dt.Columns.Add("Col1",typeof(int)); dt.Columns.Add("Col2",typeof(string)); dt.Columns.Add("Col3",typeof(DateTime)); dt.Columns.Add("Col4",typeof(bool)); for(int i=0;i< 10;i++) dt.Rows.Add(i,"String" + i.toString(),DateTime.Now,(i%2 == 0)?true:false); There is nothing wrong in this program and gives me the expected output. However, recently , I am learning Lambda and has done some basic knowledge. With that I was trying to do the same thing as under Enumerable.Range(0,9).Select(i = > { dt.Rows.Add(i,"String" + i.toString(),DateTime.Now,(i%2 == 0)?true:false); }); But I am unsuccessful. Is my approach correct(Yes I know that I am getting compile time error; since not enough knowledge on the subject so far)? Can we achieve this by the way I am doing is a big doubt(as I donot know.. just giving a shot). If so , can some one please help me in this regard. I am using C#3.0 and dotnet framework 3.5 Thanks

  Read the article

• PHP Performance Metrics

  - by bigstylee

  I am currently developing a PHP MVC Framework for a personal project. While I am developing the framework I am interested to see any notable performance by implementing different techniques for optimization. I have implemented a crude BenchMark class that logs mircotime. The problem is I have no frame of reference for execution times. I am very near the beginnig of this project with a database connection and a few queries but no output (bar some debugging text and BenchMark log). I have a current execution time of 0.01917 seconds. I was expecting this to be lower but as I said before I have no frame of reference. I appreciate there are many variables to take into account when juding performance but I am hoping to find some sort of metric to a) techniques to measure performance for example requests per second and b) compare results for example; how a "moderately" sized PHP application on a "standard" webserver will perform. I appreciate "moderately" and "standard" are very subjective words so perhaps a table of known execution times for a particular application (eg StackOverFlow's executing time). What are other techniques of measuring performance are there other than execution time? When looking at MVC Framework Performance Comparisom it talks about Requests Per Second (RPS). How is this calculated? I am guessing with my current execution time of 0.01917 seconds can handle 52 RPS (= 1 / 0.01917 ). This seems to be significantly lower than that quoted on the graph especially when you consider my current limited funcitonality.

  Read the article

• some help required while working on java and cigwin together .

  - by Hippo

  Hello .. I am new to java and also cygwin . I do not have in detailed knowledge of both . I need some help.. I simple steps i will try to explain my problem. 1) I am working on tinyOS . its open source OS , used for wireless sensor networks. It provides java libraries to work on communication (PC to sensor) 2) I am working on windows xp environment through cigwin. 3) I am developing an application . THis application requires one java interface called "Serial Forwarder" , which is readily available in libraries provided. Previously i used to start this interface manually (by entering command *"java net.tinyos.sf.SerialForwarder ")*and then my application which uses this interface. But now i want to make my application independent . User need know about this background cygwin commands . 4) So in my java application i used "Runtime.getRuntime().exec( "java net.tinyos.sf.SerialForwarder)" . 5) This i neither giving any error nor starting the interface. Am I going on right way ? When i am using runtime execute command , how can i make sure that this command is called through cigwin interface ? Also .. if i want to write .bat file .. i which i can give commands which will be executed .. how can i make sure that those commands are given through cigwin .. and not through cmd.exe .. Please help . me .

  Read the article

• Registering custom webcontrol inside mvc view?

  - by kastermester

  I am in the middle of a project where I am migrating some code for a website from WebForms to MVC - unfortunatly there's not enough time to do it all at once, so I will have to do some... not so pretty solutions. I am though facing a problems with a custom control I have written that inherits from the standard GridView control namespace Controls { public class MyGridView : GridView { ... } } I have added to the web.config file as usual: <configuration> ... <system.web> ... <pages> ... <controls> ... <add tagPrefix="Xui" namespace="Controls"/> </controls> </pages> </system.web> </configuration> Then on the MVC View: <Xui:MyGridView ID="GridView1" runat="server" ...>...</Xui:MyGgridView> However I am getting a parser error stating that the control cannot be found. I am suspecting this has to do with the mix up of MVC and WebForms, however I am/was under the impression that such mixup should be possible, is there any kind of tweak for this? I realise this solution is far from ideal, however there's no time to "do the right thing". Thanks

  Read the article

• Reading a CSV with file_get_contents in PHP

  - by JPro

  I am reading a 'kind' of csv file and exploding it and storing it in array. The file I am reading has this structure Id,Log,Res,File mydb('Test1','log1','Pass','lo1.txt'). mydb('Test2','log2','Pass','lo2.txt'). mydb('Test3','log3','Pass','lo3.txt'). Now what I am trying to do is : reading the last record in my database, get the Name, lets say in this case 'Test1' and then I am searching through my file and where I can find the position of 'Test1' and get the next lines in the file, extract the ID,s and add it to database. I am getting the position of desired string in the file, but I am not sure how to get the next lines too. Here's my code so far. <?php mysql_connect("localhost", "root", "") or die(mysql_error()); mysql_select_db("testing") or die(mysql_error()); $result = mysql_query("select ID from table_1 order by S_no DESC limit 1") or die(mysql_error()); $row = mysql_fetch_array( $result ); $a = $row['ID']; echo 'Present Top Row is '.$a.'<br>'; $addresses = explode("\n", file_get_contents('\\\\fil1\\logs\\tes.pl')); foreach($addresses as $val) { $pos = strstr($val, $a); if ($pos === false) { } else { echo "The string <br> '$a' <br>was found in the string <br>'$val' <br>"; echo " and exists at position <br>$pos<br>"; } }

  Read the article

• unable to place breakpoints in eclipse

  - by anjanb

  I am using eclipse europa (3.5) on windows vista home premium 64-bit using JDK 1.6.0_18 (32 BIT). Normally, I am able to put breakpoints just fine; However, for a particular class which is NOT part of the project (this class is inside a .JAR file (.JAR file is part of the project) ), although I have attached a source directory to this .JAR file, I am unable to place a breakpoint in this class. If I double-click on the breakpoint pane(left border), I notice that a class breakpoint is placed. I was wondering if there was NO debug info; However, found that this particular class was compiled using ant/javac task using debug="true" and debuglevel="lines,vars,source". I even ran jad on this class to confirm that it indeed contained the debug info. So, why is eclipse preventing me from placing a breakpoint ? EDIT : Just so everyone understands the context, this is a webapp running under tomcat 6.0. I am remote debugging the application from eclipse after having started tomcat outside. The application is working just fine. I am trying to understand the behavior of the above class which I'm unable to do since eclipse is not letting me set a BP. P.S : I saw a few threads here talking about BPs not being hit but in my case, I am unable to place the BP! P.P.S : I tried JDK 1.6.0_16 before trying out 1.6.0_18. Thanks for any pointers.

  Read the article

• Git Diff with Beyond Compare

  - by Avanst

  I have succeeded in getting git to start Beyond Compare 3 as a diff tool however, when I do a diff, the file I am comparing against is not being loaded. Only the latest version of the file is loaded and nothing else, so there is nothing in the right pane of Beyond Compare. I am running git 1.6.3.1 with Cygwin with Beyond Compare 3. I have set up beyond compare as they suggest in the support part of their website with a script like such: #!/bin/sh # diff is called by git with 7 parameters: # path old-file old-hex old-mode new-file new-hex new-mode "path_to_bc3_executable" "$2" "$5" | cat Has anyone else encountered this problem and know a solution to this? Edit: I have followed the suggestions by VonC but I am still having exactly the same problem as before. I am kinda new to Git so perhaps I am not using the diff correctly. For example, I am trying to see the diff on a file with a command like such: git diff main.css Beyond Compare will then open and only display my current main.css in the left pane, there is nothing in the right pane. I would like the see my current main.css in the left pane compared to the HEAD, basically what I have last committed. My git-diff-wrapper.sh looks like this: #!/bin/sh # diff is called by git with 7 parameters: # path old-file old-hex old-mode new-file new-hex new-mode "c:/Program Files/Beyond Compare 3/BCompare.exe" "$2" "$5" | cat My git config looks like this for Diff: [diff] external = c:/cygwin/bin/git-diff-wrapper.sh

  Read the article

• Some help required while working on Java and Cygwin together

  - by Hippo

  Hello .. I am new to java and also cygwin . I do not have in detailed knowledge of both . I need some help.. I simple steps i will try to explain my problem. 1) I am working on tinyOS . its open source OS , used for wireless sensor networks. It provides java libraries to work on communication (PC to sensor) 2) I am working on windows xp environment through cigwin. 3) I am developing an application . THis application requires one java interface called "Serial Forwarder" , which is readily available in libraries provided. Previously i used to start this interface manually (by entering command *"java net.tinyos.sf.SerialForwarder ")*and then my application which uses this interface. But now i want to make my application independent . User need know about this background cygwin commands . 4) So in my java application i used "Runtime.getRuntime().exec( "java net.tinyos.sf.SerialForwarder)" . 5) This i neither giving any error nor starting the interface. Am I going on right way ? When i am using runtime execute command , how can i make sure that this command is called through cigwin interface ? Also .. if i want to write .bat file .. i which i can give commands which will be executed .. how can i make sure that those commands are given through cigwin .. and not through cmd.exe .. Please help . me .

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >