Search Results

Search found 5638 results on 226 pages for 'debian sys maint'.

Page 92/226 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Port Forwarding failing only to Ubuntu servers from Draytek router

    - by Rufinus
    I know this is a kinda unusal question, but Draytek support (..which is very eager to solve the issue) seems to reach its limits. Scenario: Draytek Vigor Multiwan router with current firmware. Multiple WAN IP Aliases on one of the wan ports DMZ (or port forwarding doesnt matter) from wan ip alias to internal host currently i have two internal hosts: 192.168.0.51 (Ubuntu) 192.168.0.53 (Debian) both should be accessible from outside via one of the wan ip aliases. both are accessible with their internal ip's at all times (!) If the router gots restartet, both external ips are forwarding to its internal hosts. But after a few minutes up to 2 hours, the ubuntu host is no longer reachable via its external interface. The debian hosts on the other hand is reachable. In what does ubuntu differs from debian ? I know at least of one user with the exact same problem. see http://ubuntuforums.org/showthread.php?p=10994279 Any ideas ? TIA EDIT: via ping diagnostics directly on vigor, 192.168.0.53 is pingable, 192.168.0.51 is not. but both hosts are perfectly reachable from anywhere inside the network. if i restart ubuntu networking it works again for a short time.... i'm out of ideas.. EDIT 2: after further investigation, i noticed a ping from .51 to the network (or a host in the internet) is enough to make the port-forwarding working again. So i will add an Cronjob as a "keep-alive" ping. This will solve the problem, but the reason for this behaivor is still in the dark. Thanks to all commentors.

    Read the article

  • Permission issue for apache

    - by Aamir Adnan
    Environment Details: Amazon Ec2 Ubuntu 12.04 Django + mod_wsgi + python 2.6 web server: apache2 I have mounted a 10GB ebs volume to an instance to /mnt/ebs1/. After mounting the volume and formatting, I have placed all my project files in /mnt/ebs1/project. the wsgi file is in /mnt/ebs1/project/apache/django.wsgi. The content of wsgi file is: import os, sys sys.path.insert(0, '/mnt/ebs1/project') sys.path.insert(1, '/mnt/ebs1') os.environ['DJANGO_SETTINGS_MODULE'] = 'project.configs.common.settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() My httpd.conf file looks as: LoadModule wsgi_module /usr/lib/apache2/modules/mod_wsgi.so WSGIPythonHome /usr/bin/python2.6 WSGIScriptAlias / /mnt/ebs1/project/apache/django.wsgi <Directory /mnt/ebs1/project> Order allow,deny Allow from all </Directory> <Directory /mnt/ebs1/project/apache> Order allow,deny Allow from all </Directory> Alias /static/ /mnt/ebs1/project/static/ <Directory /mnt/ebs1/project/static> Order deny,allow Allow from all </Directory> The above configurations gives me Forbidden: You don't have permission to access / on this server. I tried to find the user which is running apache using ps aux which is www-data and has group www-data. I have tried to change the ownership of /mnt/ebs1 and its subdirectories using chown -R www-data:www-data /mnt/ebs1 but that still does not solve the problem. Can any one tell me what I am doing wrong or have missed?

    Read the article

  • How to make Synaptics touchpad work better on Linux?

    - by whitequark
    I have Debian Squeeze currently installed on a Samsung N250 netbook with a Synaptics touchpad. These touchpads are, generally, good, and everything works perfectly on Windows. The support is extremely sucky on Linux through. Of course it has all the cool features like two-finger scrolling, but the cursor (or whatever is a replacement for cursor when scrolling) is trembling awfully. It trembles when I just keep the finger on touchpad, it shakes awfully if the finger is close to the top of touchpad, and when I'm scrolling with it (no matter with two fingers or one), the page shakes a lot too. None of this behavior is observed even in Windows XP with just the default drivers installed. Here's the Xorg version: $ Xorg -version X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.32-5-686 i686 Debian Current Operating System: Linux mannaz 2.6.32-5-686 #1 SMP Fri Dec 10 16:12:40 UTC 2010 i686 Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/mannaz-root ro quiet splash Build Date: 02 December 2010 01:08:37AM xorg-server 2:1.7.7-10 (Julien Cristau <[email protected]>) Current version of pixman: 0.16.4 and here is synclient -l output: http://pastebin.com/Eqa6hGXP

    Read the article

  • MySQL is killing the server IO.

    - by OneOfOne
    I manage a fairly large/busy vBulletin forums (running on gigenet cloud), the database is ~ 10 GB (~9 milion posts, ~60 queries per second), lately MySQL have been grinding the disk like there's no tomorrow according to iotop and slowing the site. The last idea I can think of is using replication, but I'm not sure how much that would help and worried about database sync. I'm out of ideas, any tips on how to improve the situation would be highly appreciated. Specs : Debian Lenny 64bit ~12Ghz (6 cores) CPU, 7520gb RAM, 160gb disk. Kernel : 2.6.32-4-amd64 mysqld Ver 5.1.54-0.dotdeb.0 for debian-linux-gnu on x86_64 ((Debian)) Other software: vBulletin 3.8.4 memcached 1.2.2 PHP 5.3.5-0.dotdeb.0 (fpm-fcgi) (built: Jan 7 2011 00:07:27) lighttpd/1.4.28 (ssl) - a light and fast webserver PHP and vBulletin are configured to use memcached. MySQL Settings : [mysqld] key_buffer = 128M max_allowed_packet = 16M thread_cache_size = 8 myisam-recover = BACKUP max_connections = 1024 query_cache_limit = 2M query_cache_size = 128M expire_logs_days = 10 max_binlog_size = 100M key_buffer_size = 128M join_buffer_size = 8M tmp_table_size = 16M max_heap_table_size = 16M table_cache = 96 Other : > vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 9 0 73140 36336 8968 1859160 0 0 42 15 3 2 6 1 89 5 > /etc/init.d/mysql status Threads: 49 Questions: 252139 Slow queries: 164 Opens: 53573 Flush tables: 1 Open tables: 337 Queries per second avg: 61.302. Edit Additional info.

    Read the article

  • Patch management on multiple systems

    - by Pierre
    I'm in charge of auditing the security configuration of an important farm of Unix servers. So far, I came up with a way to assess the basic configuration but not the installed updates. The very problem here is that I just can't trust the package management tools on those machine. Indeed some of them did not sync with the repository for a long time (So I can't do a "yum check-updates" on Redhat for example). Some of those servers are not even connected to the internet and use an company repository. Another problem is that I have multiple target systems: AIX, Debian, Centos/Redhat, etc... So the version could be different (AIX) and the tools available will be different. And, last but not least, I can't install anything on the target system. So I need to use a script to retrieve the information and either: process it directly or save the information to be able to process it later on a server (Which may happen to run a different distribution than the one on which the information have been retrieved). The best ideas I could come up with were: either retrieve the list of installed packages on the machine (dpkg -l for example on debian) and process it on a dedicated server (Directly parsing the "Packages" file of debian repositories). Still, the problem remains the same for AIX and Redhat... or use Nessus' scripts to assess vulnerability on the installed packages, but I find this a bit dirty. Does anyone know any better/efficient way of doing this ? P.S: I already took time to review some answers to similar problems. Unfortunately Chef, puppet, ... don't meet the requirements I have to meet. Edit: Long story short. I need to have the list of missing updates on a Unix system just like MBSA on Windows. I'm not authorized to install anything on this system as it's not mine. All I have are scripts languages. Thanks.

    Read the article

  • LVS / IPVS difference in ActiveConn since upgrading

    - by Hans
    I've recently migrated from an old version of LVS / ldirectord (Ultra Monkey) to a new Debian install with ldirectord. Now the amount of Active Connections is usually higher than the amount of Inactive Connections, it used to be the other way around. Basically on the old load balancer the connections looked something like: -> RemoteAddress:Port Forward Weight ActiveConn InActConn -> 10.84.32.21:0 Masq 1 12 252 -> 10.84.32.22:0 Masq 1 18 368 However since migrating it to the new load balancer it looks more like: -> RemoteAddress:Port Forward Weight ActiveConn InActConn -> 10.84.32.21:0 Masq 1 313 141 -> 10.84.32.22:0 Masq 1 276 183 Old load balancer: Debian 3.1 ipvsadm 1.24 ldirectord 1.2.3 New load balancer: Debian 6.0.5 ipvsadm 1.25 ldirectord 1.0.3 (I guess the versioning system changed) Is it because the old load balancer was running a kernel from 2005, and ldirectord from 2004, and things have simply changed in the past 7 - 8 years? Did I miss some sysctl settings that I should be enforcing for it to behave in the same way? Everything appears to be working fine but can anyone see an issue with this behaviour? Thanks in advance! Additional info: I'm using LVS in masquerading mode, the real servers have the load balancer as their gateway. The real servers are running Apache, which hasn't changed during the upgrade. The boxes themselves show roughly the same amount of Inactive Connections shown in ipvsadm.

    Read the article

  • How to configure iptables to use apt-get in a server?

    - by segaco
    I'm starting using iptables (newbie) to protect a linux server (specifically Debian 5.0). Before I configure the iptables settings, I can use apt-get without a problem. But after I configure the iptables, the apt-get stop working. For example I use this script in iptables: #!/bin/sh IPT=/sbin/iptables ## FLUSH $IPT -F $IPT -X $IPT -t nat -F $IPT -t nat -X $IPT -t mangle -F $IPT -t mangle -X $IPT -P INPUT DROP $IPT -P OUTPUT DROP $IPT -P FORWARD DROP $IPT -A INPUT -i lo -j ACCEPT $IPT -A OUTPUT -o lo -j ACCEPT $IPT -A INPUT -p tcp --dport 22 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 22 -j ACCEPT $IPT -A INPUT -p tcp --dport 80 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 80 -j ACCEPT $IPT -A INPUT -p tcp --dport 443 -j ACCEPT $IPT -A OUTPUT -p tcp --sport 443 -j ACCEPT # Allow FTP connections @ port 21 $IPT -A INPUT -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT $IPT -A OUTPUT -p tcp --dport 21 -m state --state NEW,ESTABLISHED -j ACCEPT # Allow Active FTP Connections $IPT -A INPUT -p tcp --sport 20 -m state --state ESTABLISHED,RELATED -j ACCEPT $IPT -A OUTPUT -p tcp --dport 20 -m state --state ESTABLISHED -j ACCEPT # Allow Passive FTP Connections $IPT -A INPUT -p tcp --sport 1024: --dport 1024: -m state --state ESTABLISHED -j ACCEPT $IPT -A OUTPUT -p tcp --sport 1024: --dport 1024: -m state --state ESTABLISHED,RELATED -j ACCEPT #DNS $IPT -A OUTPUT -p udp --dport 53 --sport 1024:65535 -j ACCEPT $IPT -A INPUT -p tcp --dport 1:1024 $IPT -A INPUT -p udp --dport 1:1024 $IPT -A INPUT -p tcp --dport 3306 -j DROP $IPT -A INPUT -p tcp --dport 10000 -j DROP $IPT -A INPUT -p udp --dport 10000 -j DROP then when I run apt-get I obtain: core:~# apt-get update 0% [Connecting to ftp.us.debian.org] [Connecting to security.debian.org] [Conne and it stalls. What rules I need to configure to make it works. Thanks

    Read the article

  • DNS redirecting to Apache

    - by leo
    I have CentOS installed on LVM, that is on Debian. There are BIND and Apache on CentOS. I need to access sites from browser on Debian with names like: 1.domain, 2.domain, etc. So I set up Apache and I can access these sites, but using /etc/hosts/ on Debian. And now I'm trying to configure bind. named.conf: zone "domain" IN { type master; file "/var/named/domain.zone"; allow-update { none; }; }; 192.168.100.1 is DNS' ip; 192.168.100.139 is Apache ip; domain.zone: $TTL 86400 @ IN SOA domain. root.domain. ( 100 1H 1M 1W 1D ) @ IN NS ns1.domain. @ IN A 192.168.100.139 ns1 IN A 192.168.100.1 WWW IN A 192.168.100.139 1 IN A 192.168.100.139 2 IN A 192.168.100.139 www.1 IN A 192.168.100.139 www.2 IN A 192.168.100.139 Also, is it necessary to configure 100.168.192.in-addr.arpa? Please, explain me where I'm wrong.

    Read the article

  • disable specific PCI device at boot

    - by Rhymoid
    I've just reinstalled Debian on my Sony VAIO laptop, and my dmesg and virtual consoles all get spammed with the same messages over and over again. [ 59.662381] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 59.901732] usb 1-1.2: new high-speed USB device number 91 using ehci_hcd [ 59.917940] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 60.157256] usb 1-1.2: new high-speed USB device number 92 using ehci_hcd I believe these messages are coming from an internally connected USB device, most likely the webcam (since that's the only thing that doesn't work). The only way I can seem to have it shut up (without killing my actually useful USB ports) is to disable one of the USB host controllers: # echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci_hcd/unbind This also takes down my Bluetooth interface, but I'm fine with that. I would like this setting to persist, so that I can painlessly use my virtual console again in case I need it. I want my operating system (Debian amd64) to never wake it up, but I don't know how to do this. I've tried to blacklist the module alias for the PCI device, but it seems to be ignored: $ cat /sys/bus/pci/devices/0000\:00\:1a.0/modalias pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 $ cat /etc/modprobe.d/blacklist blacklist pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 How do I ensure that this specific PCI device is never automatically activated, without disabling its driver altogether? -edit- The module was renamed recently, now the following works from userland: echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci-pci/unbind Still, I'm looking for a way to stop the kernel from binding that device in the first place.

    Read the article

  • Xen HVM Windows 2008 network bridge

    - by JavierMartinz
    I have a problem with the Windows Server 2008 guest (hvm). I can't get a network interface running for him. I also have a Debian guest and it's working ok, but I can't do it with the Win2k8 guest. When I started the VM, the machine freezes and I can't connect by ssh to the host. /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 188.165.B.C netmask 255.255.255.0 network 188.165.B.0 broadcast 188.165.255.255 gateway 188.165.B.254 brctl show bridge name bridge id STP enabled interfaces eth0 8000.e840f20acc28 no peth0 /etc/xen/xend-config.sxp ... (vif-script vif-bridge) (network-script 'network-bridge') ... /etc/xen/win2k8.cfg # Networking # vif = [ 'ip=5.39.F.G,mac=yy:yy:yy:yy:yy:yy,type=ioemu,bridge=eth0' ] /etc/xen/debian.cfg # Networking # vif = [ 'ip=178.33.D.E,mac=xx:xx:xx:xx:xx:xx' ] As you can see, in the Debian guest I only have to specify an IP address and a MAC. But if I put that in the Win2k8 guest, the machine does not start. I am using Xen 4.0

    Read the article

  • Combine multiple network interfaces to connect to a dedicated server

    - by Dženis Macanovic
    this is an underpaid employee writing, who's apparently responsible for all the IT stuff in a very small (non-IT) company. Today said company got a bunch of PCs/workstations, a switch, a computer that's supposed to be used as a router, two DSL connections (each 16 MBit/s downstream and 1 MBit/s upstream) and a dedicated server which is hosted and managed professionally by a larger local company with some decent connection speed (1 GBit/s both directions if I'm not mistaken). This is what I've set up (note I'm not making use of the second DSL connection at all)... ETH0 ETH1 [ SWITCH ]---[LINUX DEBIAN ROUTER]---[DSL MODEM 1]---[INTERNET] | | | PC1 | | PC2 | ... ... when my boss asked me, if it was somehow possible to get 32 MBit/s downstream and 2 MBit/s upstream. At that time I replied "no" without thinking too much about it. Now I've just had the following idea... ETH1 ETH0 ETH0 ,---[DSL MODEM 1 (NON-STATIC IP)]---, ,---, ETH0 [ SWITCH ]---[LINUX DEBIAN ROUTER] [INTERNET] [LINUX DEBIAN SERVER]---[INTERNET] | | | '---[ DSL MODEM 2 (STATIC IP) ]---' '---' PC1 | | ETH2 ETH0 PC2 | ... ... but I have absolutely no clue how to implement that. Would that even be possible? What would the masquerading rules look like on the router? What about the server? I didn't find anything on the internet, mainly because I couldn't come up with any good keywords to search for to begin with. English obviously isn't my first language. Thanks in advance for your time!

    Read the article

  • Make eix available version match emerge

    - by Ryaner
    We have out Gentoo hosts using a binhost with EMERGE_DEFAULT_OPTS="--getbinpkgonly --usepkgonly" in the make.conf file so that the host only pulled down the binary hosts. All works well from that side. I use eix to check on software versions for upgrades but have hit a problem where eix will see an available version ahead of what is available on the binserver. Using glibc as an example ietpl [VE] / # emerge -s glibc Searching... [ Results for search key : glibc ] [ Applications found : 1 ] * sys-libs/glibc Latest version available: 2.14.1-r3 Latest version installed: 2.14.1-r3 Homepage: Description: GNU libc6 (also called glibc2) C library License: LGPL-2 Then eix reports a higher version available ietpl [VE] / # export LASTVERSION='{last}<version>{}' ietpl [VE] / # /usr/bin/eix --nocolor --format '<category> <name> [<installedversions:LASTVERSION>] [<bestversion:LASTVERSION>] \n' --exact --category-name sys-libs/glibc sys-libs glibc [2.14.1-r3] [2.15-r2] What I'm after is for eix to report the latest version available as 2.14.1-r3 like emerge. I've a feeling this is possible since without any formatting, eix returns Available versions: (2.2) ~2.9_p20081201-r3!s 2.10.1-r1!s 2.11.3!s ~2.12.1-r3!s 2.12.2!s{tbz2} ~2.13-r2!s 2.13-r4!s ~2.14!s ~2.14.1-r2!s 2.14.1-r3!s{tbz2} ~2.15-r1!s 2.15-r2!s ~2.15-r3!s **2.16.0!s **9999!s correctly tagging the latest unmasked binary package with {tbz2} I would have thought that the binary flag would do it, but that returns no matches --binary Match packages with *.tbz2 files.

    Read the article

  • How to debug node.js applications

    - by Fabian Jakobs
    How do I debug a node.js server application? Right now I'm mostly using alert debugging with print statements like this: sys.puts(sys.inspect(someVariable)); There must be a better way to debug. I know that google Chrome has a command line debugger. Is this debugger available for node.js as well?

    Read the article

  • Python OSError not reporting errors

    - by breathe
    Ive got this snippet that Im using to convert image files to tiff. I want to be informed when a file fails to convert. Imagemagick exits 0 when successfully run, so I figured the following snippet would report the issue. However no errors are being reported at all. def image(filePath,dirPath,fileUUID,shortFile): try: os.system("convert " + filePath + " +compress " + dirPath + "/" + shortFile + ".tif") except OSError, e: print sys.stderr, "image conversion failed: %s" % (e.errno, e.strerror) sys.exit(-1)

    Read the article

  • Python: How to read huge text file into memory

    - by asmaier
    I'm using Python 2.6 on a Mac Mini with 1GB RAM. I want to read in a huge text file $ ls -l links.csv; file links.csv; tail links.csv -rw-r--r-- 1 user user 469904280 30 Nov 22:42 links.csv links.csv: ASCII text, with CRLF line terminators 4757187,59883 4757187,99822 4757187,66546 4757187,638452 4757187,4627959 4757187,312826 4757187,6143 4757187,6141 4757187,3081726 4757187,58197 So each line in the file consists of a tuple of two comma separated integer values. I want to read in the whole file and sort it according to the second column. I know, that I could do the sorting without reading the whole file into memory. But I thought for a file of 500MB I should still be able to do it in memory since I have 1GB available. However when I try to read in the file, Python seems to allocate a lot more memory than is needed by the file on disk. So even with 1GB of RAM I'm not able to read in the 500MB file into memory. My Python code for reading the file and printing some information about the memory consumption is: #!/usr/bin/python # -*- coding: utf-8 -*- import sys infile=open("links.csv", "r") edges=[] count=0 #count the total number of lines in the file for line in infile: count=count+1 total=count print "Total number of lines: ",total infile.seek(0) count=0 for line in infile: edge=tuple(map(int,line.strip().split(","))) edges.append(edge) count=count+1 # for every million lines print memory consumption if count%1000000==0: print "Position: ", edge print "Read ",float(count)/float(total)*100,"%." mem=sys.getsizeof(edges) for edge in edges: mem=mem+sys.getsizeof(edge) for node in edge: mem=mem+sys.getsizeof(node) print "Memory (Bytes): ", mem The output I got was: Total number of lines: 30609720 Position: (9745, 2994) Read 3.26693612356 %. Memory (Bytes): 64348736 Position: (38857, 103574) Read 6.53387224712 %. Memory (Bytes): 128816320 Position: (83609, 63498) Read 9.80080837067 %. Memory (Bytes): 192553000 Position: (139692, 1078610) Read 13.0677444942 %. Memory (Bytes): 257873392 Position: (205067, 153705) Read 16.3346806178 %. Memory (Bytes): 320107588 Position: (283371, 253064) Read 19.6016167413 %. Memory (Bytes): 385448716 Position: (354601, 377328) Read 22.8685528649 %. Memory (Bytes): 448629828 Position: (441109, 3024112) Read 26.1354889885 %. Memory (Bytes): 512208580 Already after reading only 25% of the 500MB file, Python consumes 500MB. So it seem that storing the content of the file as a list of tuples of ints is not very memory efficient. Is there a better way to do it, so that I can read in my 500MB file into my 1GB of memory?

    Read the article

  • Problem with bootstrap loader and kernel

    - by dboarman-FissureStudios
    We are working on a project to learn how to write a kernel and learn the ins and outs. We have a bootstrap loader written and it appears to work. However we are having a problem with the kernel loading. I'll start with the first part: bootloader.asm: [BITS 16] [ORG 0x0000] ; ; all the stuff in between ; ; the bottom of the bootstrap loader datasector dw 0x0000 cluster dw 0x0000 ImageName db "KERNEL SYS" msgLoading db 0x0D, 0x0A, "Loading Kernel Shell", 0x0D, 0x0A, 0x00 msgCRLF db 0x0D, 0x0A, 0x00 msgProgress db ".", 0x00 msgFailure db 0x0D, 0x0A, "ERROR : Press key to reboot", 0x00 TIMES 510-($-$$) DB 0 DW 0xAA55 ;************************************************************************* The bootloader.asm is too long for the editor without causing it to chug and choke. In addition, the bootloader and kernel do work within bochs as we do get the message "Welcome to our OS". Anyway, the following is what we have for a kernel at this point. kernel.asm: [BITS 16] [ORG 0x0000] [SEGMENT .text] ; code segment mov ax, 0x0100 ; location where kernel is loaded mov ds, ax mov es, ax cli mov ss, ax ; stack segment mov sp, 0xFFFF ; stack pointer at 64k limit sti mov si, strWelcomeMsg ; load message call _disp_str mov ah, 0x00 int 0x16 ; interrupt: await keypress int 0x19 ; interrupt: reboot _disp_str: lodsb ; load next character or al, al ; test for NUL character jz .DONE mov ah, 0x0E ; BIOS teletype mov bh, 0x00 ; display page 0 mov bl, 0x07 ; text attribute int 0x10 ; interrupt: invoke BIOS jmp _disp_str .DONE: ret [SEGMENT .data] ; initialized data segment strWelcomeMsg db "Welcome to our OS", 0x00 [SEGMENT .bss] ; uninitialized data segment Using nasm 2.06rc2 I compile as such: nasm bootloader.asm -o bootloader.bin -f bin nasm kernel.asm -o kernel.sys -f bin We write bootloader.bin to the floppy as such: dd if=bootloader.bin bs=512 count=1 of/dev/fd0 We write kernel.sys to the floppy as such: cp kernel.sys /dev/fd0 As I stated, this works in bochs. But booting from the floppy we get output like so: Loading Kernel Shell ........... ERROR : Press key to reboot Other specifics: OpenSUSE 11.2, GNOME desktop, AMD x64 Any other information I may have missed, feel free to ask. I tried to get everything in here that would be needed. If I need to, I can find a way to get the entire bootloader.asm posted somewhere. We are not really interested in using GRUB either for several reasons. This could change, but we want to see this boot successful before we really consider GRUB.

    Read the article

  • Why is mod_wsgi not able to write data? IOError: failed to write data

    - by BryanWheelock
    What could be causing this error: $ sudo tail -n 100 /var/log/apache2/error.log' [Wed Dec 29 15:20:03 2010] [error] [client 220.181.108.181] mod_wsgi (pid=20343): Exception occurred processing WSGI script '/home/username/public_html/idm.wsgi'. [Wed Dec 29 15:20:03 2010] [error] [client 220.181.108.181] IOError: failed to write data Here is the WSGI script: $ cat public_html/idm.wsgi import os import sys sys.path.append('/home/username/public_html/IDM_app/') os.environ['DJANGO_SETTINGS_MODULE'] = 'settings' import django.core.handlers.wsgi application = django.core.handlers.wsgi.WSGIHandler() Why would Django not be able to write data? I'm running Django 1.2.4

    Read the article

  • gcc precompiled headers weird behaviour with -c option

    - by pachanga
    Folks, I'm using gcc-4.4.1 on Linux and before trying precompiled headers in a really large project I decided to test them on simple program. They "kinda work" but I'm not happy with results and I'm sure there is something wrong about my setup. First of all, I wrote a simple program(main.cpp) to test if they work at all: #include <boost/bind.hpp> #include <boost/function.hpp> #include <boost/type_traits.hpp> int main() { return 0; } Then I created the precompiled headers file pre.h(in the same directory) as follows: #include <boost/bind.hpp> #include <boost/function.hpp> #include <boost/type_traits.hpp> ...and compiled it: $ g++ -I. pre.h (pre.h.gch was created) After that I measured compile time with and without precompiled headers: with pch $ time g++ -I. -include pre.h main.cpp real 0m0.128s user 0m0.088s sys 0m0.048s without pch $ time g++ -I. main.cpp real 0m0.838s user 0m0.784s sys 0m0.056s So far so good! Almost 7 times faster, that's impressive! Now let's try something more realistic. All my sources are built with -c option and for some reason I can't make pch play nicely with it. You can reproduce this with the following steps below... I created the test module foo.cpp as follows: #include <boost/bind.hpp> #include <boost/function.hpp> #include <boost/type_traits.hpp> int whatever() { return 0; } Here are the timings of my attempts to build the module foo.cpp with and without pch: with pch $ time g++ -I. -include pre.h -c foo.cpp real 0m0.357s user 0m0.348s sys 0m0.012s without pch $ time g++ -I. -c foo.cpp real 0m0.330s user 0m0.292s sys 0m0.044s That's quite strange, looks like there is no speed up at all!(I ran timings for several times). It turned out precompiled headers were not used at all in this case, I checked it with -H option(output of "g++ -I. -include pre.h -c foo.cpp -H" didn't list pre.h.gch at all). What am I doing wrong?

    Read the article

  • Usb Driver on 64bit Windows

    - by SurDin
    I have a pretty generic 64bit driver based on bulkusb.sys in WDK. It's been working for years with an embedded program, but now it is needed to work on Vista 64. From all the documentation I've tried to look through there doesn't seem to be anything affecting it, except compiling it for the 64bit environment, and yet when I compile it with the AMD64 build environment, I get "driver not intended for this platform" error message when it's trying to open the sys. What could be the solution for this?

    Read the article

  • SQL Server Indexing

    - by durilai
    I am trying to understand what is going on with CREATE INDEX internally. When I create a NONCLUSTERED index it shows as an INSERT in the execution plan as well as when I get the query test. DECLARE @sqltext VARBINARY(128) SELECT @sqltext = sql_handle FROM sys.sysprocesses s WHERE spid = 73 --73 is the process creating the index SELECT TEXT FROM sys.dm_exec_sql_text(@sqltext) GO Show: insert [dbo].[tbl] select * from [dbo].[tbl] option (maxdop 1) This is consistent in the execution plan. Any info is appreciated.

    Read the article

  • Two way binding settings problem.

    - by Jamie
    Hi, I am having a problem using two way binding with a listpicker. I am able to set the value using c# but not in the SelectedItem=".." in xaml. The binding is returning the correct value (and is a value in the listpicker) as i have texted it by assigning the text to a textblock. When the page loads, the binding used on the listpicker causes a System.ArgumentOutOfRangeException The code i am using to set it is: // Update a setting value. If the setting does not exist, add the setting. public bool AddOrUpdateValue(string key, Object value) { bool valueChanged = false; try { // If new value is different, set the new value if (settingsStorage[key] != value) { settingsStorage[key] = value; valueChanged = true; } } catch (KeyNotFoundException) { settingsStorage.Add(key, value); valueChanged = true; } catch (ArgumentException) { settingsStorage.Add(key, value); valueChanged = true; } catch (Exception e) { Console.WriteLine("Exception occured whilst using IsolatedStorageSettings: " + e.ToString()); } return valueChanged; } // Get the current value of the setting, if not found, set the setting to default value. public valueType GetValueOrDefault<valueType>(string key, valueType defaultValue) { valueType value; try { value = (valueType)settingsStorage[key]; } catch (KeyNotFoundException) { value = defaultValue; } catch (ArgumentException) { value = defaultValue; } return value; } public string WeekBeginsSetting { get { return GetValueOrDefault<string>(WeekBeginsSettingKeyName, WeekBeginsSettingDefault); } set { AddOrUpdateValue(WeekBeginsSettingKeyName, value); Save(); } } And in the xaml: <toolkit:ListPicker x:Name="WeekStartDay" Header="Week begins on" SelectedItem="{Binding Source={StaticResource AppSettings}, Path=WeekBeginsSetting, Mode=TwoWay}"> <sys:String>monday</sys:String> <sys:String>sunday</sys:String> </toolkit:ListPicker> The StaticResource AppSettings is a resource from a seperate .cs file. <phone:PhoneApplicationPage.Resources> <local:ApplicationSettings x:Key="AppSettings"></local:ApplicationSettings> </phone:PhoneApplicationPage.Resources> Thanks in advance

    Read the article

  • Is there a /users/www-data type directory in RedHat/Fedora?

    - by Yarin
    I'm trying to setup web2py on my Fedora server, and the instructions, written for Debian, are telling me to install it in the /users/www-data directory. I realize that Fedora uses a default 'apache' user for running Apache, and Debian uses a 'www-data' user, but there's no corresponding /users/apache directory on my machine... Here are the instructions http://web2py.com/book/default/section/11/2

    Read the article

  • How to get parameter values for dm_exec_sql_text

    - by Ted Elliott
    I'm running the following statement to see what queries are executing in sql server: select * from sys.dm_exec_requests r cross apply sys.dm_exec_sql_text(r.sql_handle) where r.database_id = DB_ID('<dbname>') The sql text that comes back is parameterized: (@Parm0 int) select * from foo where foo_id = @Parm0 Is there any way to get the values for the parameters that the statement is using? Say by joining to another table perhaps?

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >