Search Results

Search found 10603 results on 425 pages for 'device emulation'.

Page 92/425 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Hard drive restore on reboot on windows embedded

    - by sav
    My company has an old out of service device with windows embedded on it that we want to re purpose. Any changes to the drive (SD Card with 2 partitions), (ie: installed software, ip address, system settings, files) are reset/deleted when we reboot the device. We can successfully make changes to the drive by plugging it into a PC, but that has its limitations and we would like to be able to use our device. Can anyone tell us more about the technology used for doing this and how/if we can disable it?

    Read the article

  • Asus F5N laptop built-in card reader driver problem

    - by Felix Dombek
    I have an Asus F5N X50N-AP011C. I have manually installed Windows 7 x64 on it, replacing the original Windows Vista. It also automatically installed a card reader driver, but it can no longer read xD cards. The driver shows in the device manager as "Generic- xD/SDMMC/MS/Pro USB device" (under "drives" - and a drive is also shown in Windows Explorer). The same card reader once used to work with xD cards. I also tried to manually install drivers from this website: http://www.station-drivers.com/page/realtek.htm - the RTS 5158 but it didn't work (it shows as USB device in device manager, but not as a drive in Windows Explorer). Does anyone know what card reader my model has built-in? (I think it's the 5158 but I don't know how to verify that - there's also no hint in the System Information tool, only the driver name is listed under "drives") how it is connected internally? if there is a better Windows 7 x64 driver?

    Read the article

  • 3G USB Modem Not Working in 12.04

    - by Seyed Mohammad
    When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

    Read the article

  • Windows Phone 7 ActiveSync error 86000C09 (My First Post!)

    - by Chris Heacock
    Hello fellow geeks! I'm kicking off this new blog with an issue that was a real nuisance, but was relatively easy to fix. During a recent Exchange 2003 to 2010 migration, one of the users was getting an error on his Windows Phone 7 device. The error code that popped up on the phone on every sync attempt was 86000C09 We tested the following: Different user on the same device: WORKED Problem user on a different device: FAILED   Seemed to point (conclusively) at the user's account as the crux of the issue. This error can come up if a user has too many devices syncing, but he had no other phones. We verified that using the following command: Get-ActiveSyncDeviceStatistics -Identity USERID Turns out, it was the old familiar inheritable permissions issue in Active Directory. :-/ This user was not an admin, nor had he ever been one. HOWEVER, his account was cloned from an ex-admin user, so the unchecked box stayed unchecked. We checked the box and voila, data started flowing to his device(s). Here's a refresher on enabling Inheritable permissions: Open ADUC, and enable Advanced Features: Then open properties and go to the Security tab for the user in question: Click on Advanced, and the following screen should pop up: Verify that "Include inheritable permissions from this object's parent" is *checked*.   You will notice that for certain users, this box keeps getting unchecked. This is normal behavior due to the inbuilt security of Active Directory. People that are in the following groups will have this flag altered by AD: Account Operators Administrators Backup Operators Domain Admins Domain Controllers Enterprise Admins Print Operators Read-Only Domain Controllers Replicator Schema Admins Server Operators Once the box is cheked, permissions will flow and the user will be set correctly. Even if the box is unchecked, they will function normally as they now has the proper permissions configured. You need to perform this same excercise when enabling users for Lync, but that's another blog. :-)   -Chris

    Read the article

  • Ubuntu 12.04 LTS Wireless Asus USB-N53 (rt3572sta) driver installation issue

    - by Jake Thompson
    My purchase of the Asus USB-N53 just came in today and I spent several hours Googling and researching drivers for this device. When I first plugged the device in it connected fine to my open system, WEP, DHCP configured access point. I opened Google Chrome and a few pages loaded, everything seemed fine. 30 seconds later... Boom! It disconnected and showed attempts to reconnect and asked for the WEP key and just showed a state of infinite connection time until it asked me for the password again. I'm using amd64 (64 bit Ubuntu desktop 12.04 LTS) The official driver can be found here although I had no luck with it. lsusb: Bus 003 Device 002: ID 0b05:179d ASUSTek Computer, Inc. uname -a Linux Jake 3.2.0-31-generic #50-Ubuntu SMP Fri Sep 7 16:16:45 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux ----------------------------------------------------------------------------------Solved: I must of done something wrong when I originally installed the latest drivers from the chipset manufacturers website. I tried reinstalling and did modprobe rt3572sta and waited maybe 10 minutes??? and I connected then I rebooted and everything seems to be working so far. What I did do before hand is unplug the device and typed into the terminal (once for every source I attempted to install): cd '<directory of the driver source>' make uninstall make clean Then I went into the 2.5.0.0 directory and installed that with make make install Then I typed modprobe rt3572sta This was all in superuser. For those who don't know: sudo su

    Read the article

  • Disable Ethernet permanently to speed up boot time

    - by Anwar Shah
    I do not use the wired Ethernet Card. It seems to me that, Ubuntu is always trying in boot time to check the network via eth0, Which consumes some times and I guess this may slow down the boot process a bit. My dmesg output is below (partial) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985592] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985651] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985693] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 2.056261] firewire_core: created device fw0: GUID 00023f87af41fd7d, S400 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 3.710435] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) A big time here..... 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 13.466642] ADDRCONF(NETDEV_UP): eth0: link is not ready 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.125296] Adding 1050620k swap on /dev/sda6. Priority:-1 extents:1 across:1050620k 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.226952] EXT4-fs (sda9): re-mounted. Opts: (null) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335012] snd_hda_intel 0000:00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335091] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335128] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.346410] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.428551] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.436958] cfg80211: Calling CRDA to update world regulatory domain 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.476550] Linux video capture interface: v2.00 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.486385] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008) So, My question is How can I disable the Ethernet card completely, so that kernel will not try to use that?

    Read the article

  • How did I get here? My route to Android, iPhone, Windows Phone 7, and interest in Mobile Devices

    - by Wallym
    I get asked all the time how/why I got interested in mobile and jumped on this fairly early.  I tend to give half answers because it wasn't just one thing that took me to mobile, but a whole host of separate ivents culminating in a specific event where I wasdoing market research in May/June 2008.  Let me throw out the events and the facts about me: I tend to like new, different, cool stuff.  I jumped on .NET early on.  I jumped on Ajax early on.  I don't jump on every new technology that comes down the road, I'm probably the only person on the planet that doesn't "get" MVC, though I acknowledge that a lot of people do and it solves a number of problems in the default settings of ASP.NET WebForms. I remember buying an early Windows CE device. It was interesting, but dang, this stylus thing sucks. After I lost my third stylus, i just gave up.  I got my first mobile phone in early 1999.  Reception was crappy, but I could see the value in being mobile. In 1999, I worked on a manufacturing systems project.  One piece of the projects was a set of handheld devices on the shop floor.  While the UI was a crappy DOS based, yes I said DOS as in Disk Operating System Version 6.22, I could see that the wireless world was a direction I wanted to be in. In 2000, Microsoft released the first public alpha of .NET.  Very cool stuff indeed.  One piece of the puzzle was a set of mobile controls for ASP.NET.  I build numerous test apps as well as mobile version using these mobile controls.  Now, the mobile UIs of the time were based on WML, which was crap. I could real all the analysis of mobile and read all about growth rates.  Now, you have to realize that growth rates can be impressive when dealing with small numbers, but I knew it was a comer. In our first book, I got talked out of mobile because of the line from the publisher "Wally, mobile doesn't sell." Blackberry was the dominant device of the mid 2000s.  Its users were referred to as "Crackberry addicts."  Unfortunately, the mobile development experience for native apps was crap and the web experience was fairly rough as well, but if they could get the ecosystem started, other phones and better blackberryies would come out.  I finally jumped into using a blackberry. Sometime around 2006, I heard "Wally, mobile doesn't sell" again.  Now, anyone that knows me knows that someone saying something like this to me means I'll keep trying it. The phones of the mid 2000s were moving to be more graphical, but there were too many that had this idea that they had to use a stylus.  Stylus suck.  They get lost too easily. I worked on a project in 2007 and 2008 for a startup trying to answer the question of "What is there to do where I am at?"  For some reason, they wanted to be tied to PCs.  As it became obvious that they were having problems, their investor asked us to do some market research and to figure out what the marketplace did want.  One of the important things that I figured out was the we lived in a mobile world and if you had a mobile app, it need to be on a mobile device, not tied to a desktop/laptop/netbook device.  If there was any single event, this was it - I was doing some market research and sat and talked to people in a bar/restaurant in Atlanta called "The Grove" on Lavista.  The consensus of the people that I talked to was that they wanted their data where ever they were at, laptop, pc, mobile, whereever. In 2007, Apple released the iPhone.  Wow, what an impressive device, even with all the problems of a 1st generation device.  I bought an iPod Touch 1st generation to understand touch better, one of the best decisions I ever made. I decided in late 2008, to make a move into cloud, for a number of reasons.  I was working on an example app.  In April, 2009, one of my friends at Microsoft said "don't mention my name with this, but you need an iPhone front end for this app."  How do you get on the iPhone.  Well, there are a number of ways including: ObjectiveC.  Its hard to teach an old dog new tricks, and this dog knows .NET, not ObjectiveC. HTML, web, javascript optimized interface.  yeah, this is possible. PhoneGap.  Now, this is interesting, take an html interface and get it to run on the iPhone, Android, Blackberry, and other platforms.  I thought that this way made the most sense for me until......... MonoTouch.  In May/June 2009, Novell announced a way for .NET/c# developers to write apps for the iPhone.  This is the way that made the most sense to me. Titanium by Appcelerator.  This is similar in concept to PhoneGap.  I haven't played with this much but do want to learn more about it. In July, 2009, I emailed one of my contacts at Wrox to see if they would be interested in a short MonoTouch ebook in their Wrox Blox format.  I fully expected another  response along the lines of "Wally, mobile doesn't sell."  The response I got was "Wally, iPhone is H O T, get started immediately, can you have this to me before Labor Day."  Not quite the response I expected.  Thankfully, we didn't make the Labor Day, first draft date. I kept pushing back because I had a feeling that things were not going to be quite as polished and feature rich as necessary.  After all, Novell doesn't have the resouces of Microsoft's developer division. The ebook shipped on November 30, 2009. On about December, 15, 2009, my editor emailed and said "Your ebook is selling really well, lets do a full book and it by March 1 so get started."  Thankfully, guys like Craig Dunn and Chris Hardy were interested along with Martin and Ror joinged us later on. I bought my wife an iPhone 3Gs in early 2010 to go along with all my iPod Touch devices. I tried to pretend in 2010 that I wasn't that interested in mobile and still had interest in the desktop technologies.  I love the technologies and continue to use them today, but that isn't where my interest is right now.  I'm just about all mobile all the time with my energies.  Our book shipped in the beginning of July, 2010 right in the middle of the Apple FUD.I've been looking at Mobile Web as a way around the AppStores and Apple FUD problems of 2010. With all the Apple self FUD, we became interested in Android.I went up to Dino Esposito at DevConnections in Las Vegas at introduced myself. I've always tried to keep up with what Dino has been doing. I was shocked, he wanted to meet me.  We must have talked for 1.5 hours. It was way more time than I deserved. If you get a chance, go and introduce yourself to Dino. He's a great guy. Microsoft released Windows Phone 7 in the Fall of 2010.  I'm not doing development on that platform at this time.  I think they have a very interesting user interface.  The devices are being positively reviewed.  For my purposes, the devices are limited at this point in time.  We'll see what 2011 brings as far as updates to the operating system.  I need multitasking/background processing and html5 in the browser. Add that as well as acceptance in the marketplace and I'll be more interested in the device. Obviosuly, I'm now working on a MonoDroid book . I own Android and iPhone/iOS devices.  I am currently working on some startup ideas and am exploring as much in that area as I can. For 2011, I'm planning on speaking at Android Developer's Conference (AnDevCon) and Mobile Connections.  I'm really excited about this. I have a couple of magazine articles coming out in 2011 on Android and iPhone development with the Mono technologies.is Mono "The Answer"? What's "The Question?" I think it will work for me.  It might work for you, it might not.  it depends on your situation.  Its the current horse that I am riding. I might find a better horse tomorrow. So, that's how I got here.  I'm in love with mobile.  Mobile native apps on the device as well as mobile web.  I'm into all this cool stuff.  Where are you at?

    Read the article

  • Restoring android after ubuntu touch fails

    - by deimus
    I'm trying to restore android after playing around with ubuntu touch I follow exactly the same steps described the ubuntu's wiki page i.e. Download the factory image corresponding to your device's model and version (initial table has links). Ensure the device is connected and powered on. Extract the downloaded file and cd into the extracted directory. run adb reboot-bootloader run ./flash-all.sh (use sudo if lack of permissions on the workstation don't allow you to talk to the device). The archive is downloaded successfully, checked the sha1 checksum everything is ok. But the ./flash-all.sh fails like this sending 'bootloader' (2308 KB)... OKAY [ 0.513s] writing 'bootloader'... OKAY [ 0.292s] finished. total time: 0.805s rebooting into bootloader... OKAY [ 0.007s] finished. total time: 0.008s sending 'radio' (12288 KB)... OKAY [ 2.668s] writing 'radio'... OKAY [ 1.372s] finished. total time: 4.040s rebooting into bootloader... OKAY [ 0.009s] finished. total time: 0.009s archive does not contain 'boot.sig' archive does not contain 'recovery.sig' failed to allocate 435793780 bytes error: update package missing system.img My device is Nexus 4. Tried both 4.2.2 and 4.3 androind versions for Nexus 4 still the same. Any ideas how problem can be solved ?

    Read the article

  • How to set Alpha value from pixel shader in SlimDX Direct3d9

    - by Yashwinder
    I am trying to set alpha value of color as color.a = 0.5f in my pixel shader but all the time it is giving an exception. I can set color.r, color.g, color.b but it is not allowing me to set color.a and throwing an exception D3DERR_INVALIDCALL: Invalid call (-2005530516). I have just created a direct3d9 device and assigned my pixel shader to it. My pixel shader code is as below sampler2D ourImage : register(s0); float4 main(float2 locationInSource : TEXCOORD) : COLOR { float4 color = tex2D( ourImage , locationInSource.xy); color.a = 0.2; return color; } I am creating my pixel shader as byte[] byteCode = GiveFxFile(transitionEffect.PixelShaderFileName); var shaderBytecode = ShaderBytecode.Compile(byteCode, "main", "ps_2_0", ShaderFlags.None); var pixelShader = new PixelShader(device, ShaderBytecode); _device.PixelShader=pixelShader; I have initialized my device as var _presentParams = new PresentParameters { Windowed = _isWindowedMode, BackBufferWidth = (int)SystemParameters.PrimaryScreenWidth, BackBufferHeight = (int)SystemParameters.PrimaryScreenHeight, // Enable Z-Buffer // This is not really needed in this sample but real applications generaly use it EnableAutoDepthStencil = true, AutoDepthStencilFormat = Format.D16, // How to swap backbuffer in front and how many per screen refresh BackBufferCount = 1, SwapEffect = SwapEffect.Copy, BackBufferFormat = _direct3D.Adapters[0].CurrentDisplayMode.Format, PresentationInterval = PresentInterval.Immediate, DeviceWindowHandle = _windowHandle }; _device = new Device(_direct3D, 0, DeviceType.Hardware, _windowHandle, deviceFlags | CreateFlags.Multithreaded, _presentParams);

    Read the article

  • Friday Tips #33

    - by Chris Kawalek
    Happy Friday, everyone! Our tip this week is from an excellent white paper written by our own Greg King titled Oracle VM 3: Building a Demo Environment using Oracle VM VirtualBox. In it, Greg gives you everything you need to know to set up Oracle VM Server inside of Oracle VM VirtualBox for testing and demoing. The section we're highlighting below is on how to configure the network interfaces of your virtual machines: VirtualBox comes with a few different types of network interfaces that can be used to allow communication between the VM guests and the host operating system, including network interfaces that will allow the VM guests to communicate with local and wide area networks accessed from your laptop or personal computer. However, for the purpose of the demonstration environment we will limit the network communication to include access just between your desktop and the virtual machines being managed by VirtualBox. The install process for Oracle VM VirtualBox creates a single host-only network device on your laptop or personal computer. Using the host-only network device will allow you to open a browser on your desktop to access the Oracle VM Manager running within the VirtualBox VM guest. The device will only allow network traffic between the VM guests and your host operating system, but nothing outside the confines of your laptop or personal computer. We will need to add a second host-only network since the Oracle VM Server appliance has both eth0 and eth1 configured. You can choose to use eth1 on the Oracle VM Servers or not use them – the choice is yours. But, at least the host side network device will exist if you decide to use it. Greg goes on to describe in detail how to setup the network interfaces, so you can head on over to the paper and get even more info. See you next week! -Chris 

    Read the article

  • Canon MX870 printer only shows "Processing" on the status LCD

    - by Nick
    I had my Canon MX870 installed perfectly fine in 11.10, but since upgrading to 12.04, it no longer works. The printer is recognized in print settings and when I attempt to print a test page, the printer LCD displays a "Processing" message, but then it disappears and nothing happens. Here are my logs (note that printing did not succeed despite the access logs showing success): # /var/log/cups/access_log localhost - - [22/May/2012:12:29:35 -0400] "POST /printers/Canon-MX870 HTTP/1.1" 200 412 Print-Job successful-ok - # /var/log/cups/error_log W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-Gray..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateProfile: org.freedesktop.ColorManager.AlreadyExists:profile id 'Canon-MX870-RGB..' already exists W [22/May/2012:12:25:51 -0400] failed to CreateDevice: org.freedesktop.ColorManager.AlreadyExists:device id 'cups-Canon-MX870' already exists

    Read the article

  • Can't shrink Windows Boot NTFS disk: ERROR(5): Could not map attribute 0x80 in inode, Input/output error

    - by arcyqwerty
    Ubuntu 12.04 LTS, all updates current as of 7/3/2012 gksudo gparted Shrink /dev/sda2 from 367GB to 307GB GParted 0.11.0 --enable-libparted-dmraid Libparted 2.3 Shrink /dev/sda2 from 367.00 GiB to 307.00 GiB 00:32:57 ( ERROR ) calibrate /dev/sda2 00:00:00 ( SUCCESS ) path: /dev/sda2 start: 20,484,096 end: 790,142,975 size: 769,658,880 (367.00 GiB) check file system on /dev/sda2 for errors and (if possible) fix them 00:00:53 ( SUCCESS ) ntfsresize -P -i -f -v /dev/sda2 ntfsresize v2012.1.15AR.1 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 394065338880 bytes (394066 MB) Current device size: 394065346560 bytes (394066 MB) Checking for bad sectors ... Checking filesystem consistency ... Accounting clusters ... Space in use : 327950 MB (83.2%) Collecting resizing constraints ... Estimating smallest shrunken size supported ... File feature Last used at By inode $MFT : 389998 MB 0 Multi-Record : 394061 MB 386464 $MFTMirr : 314823 MB 1 Compressed : 394064 MB 1019521 Sparse : 330887 MB 752454 Ordinary : 393297 MB 706060 You might resize at 327949758464 bytes or 327950 MB (freeing 66116 MB). Please make a test run using both the -n and -s options before real resizing! shrink file system 00:32:04 ( ERROR ) run simulation 00:32:04 ( ERROR ) ntfsresize -P --force --force /dev/sda2 -s 329640837119 --no-action ntfsresize v2012.1.15AR.1 (libntfs-3g) Device name : /dev/sda2 NTFS volume version: 3.1 Cluster size : 4096 bytes Current volume size: 394065338880 bytes (394066 MB) Current device size: 394065346560 bytes (394066 MB) New volume size : 329640829440 bytes (329641 MB) Checking filesystem consistency ... Accounting clusters ... Space in use : 327950 MB (83.2%) Collecting resizing constraints ... Needed relocations : 13300525 (54479 MB) Schedule chkdsk for NTFS consistency check at Windows boot time ... Resetting $LogFile ... (this might take a while) Relocating needed data ... Updating $BadClust file ... Updating $Bitmap file ... ERROR(5): Could not map attribute 0x80 in inode 1667593: Input/output error ======================================== Windows has run chkdsk successfully (on boot) several times now

    Read the article

  • Calculating Screen Resolutions Using WPF

    - by Jeff Ferguson
    WPF measures all elements in device independent pixels (DIPs). These DIPs equate to device pixels if the current display monitor is set to the default of 96 DPI. However, for monitors set to a DPI setting that is different than 96 DPI, then WPF DIPs will not correspond directly to monitor pixels. Consider, for example, the WPF properties SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth. If your monitor resolution is set to 1024 pixels wide by 768 pixels high, and your monitor is set to 96 DPI, then WPF will report the value of SystemParameters.PrimaryScreenHeight as 768 and the value of SystemParameters.PrimaryScreenWidth as 1024. No problem. This aligns nicely because the WPF device independent pixel value (96) matches your monitor's DPI setting (96). However, if your monitor is not set to display pixels at 96 DPI, then SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth will not return what you expect. The values returned by these properties may be greater than or less than what you expect, depending on whether or not your monitor's DPI value is less than or greater than 96. Since the SystemParameters.PrimaryScreenHeight and SystemParameters.PrimaryScreenWidth properties are WPF properties, their values are measured in WPF DIPs, rather than taking monitor DPI into effect. Once again: WPF measures all elements in device independent pixels (DIPs). To combat this issue, you must take your monitor's DPI settings into effect if you're looking for the monitor's width and height using the monitor's DPI settings. The handy code block below will help you calculate these values regardless of the DPI setting on your monitor: Window MainWindow = Application.Current.MainWindow; PresentationSource MainWindowPresentationSource = PresentationSource.FromVisual(MainWindow); Matrix m = MainWindowPresentationSource.CompositionTarget.TransformToDevice; DpiWidthFactor = m.M11; DpiHeightFactor = m.M22; double ScreenHeight = SystemParameters.PrimaryScreenHeight * DpiHeightFactor; double ScreenWidth = SystemParameters.PrimaryScreenWidth * DpiWidthFactor; The values of ScreenHeight and ScreenWidth should, after this code is executed, match the resolution that you see in the display's Properties window.

    Read the article

  • Android development in Unreal with an existing project

    - by user1238929
    I am currently using an Unreal 3 project that has been targeted for multiple devices. Originally, it was targeted for iOS and now I want to try and build it for Android. The project is capable of doing it and I am in the process of testing it. I think I have everything I need in order to build it and launch it for an android device that I have set up and connected to my PC and is recognized by the Android SDK ABD. I am currently trying to build and launch the game through the Unreal Frontend but when I try, I am getting stuck at getting the Unreal Frontend to find my Android device as a platform to debug, like it would with a PC, Xbox360, or PS3. Right now, I am just trying to launch the game to see if I can get it to simply run on an Android device, I'm going to worry about the packaging later. So I have two questions: Am I on the right track in looking at the Unreal Frontend to cook and launch the project on Android or should I look somewhere else? How do I get Unreal to recognize my Android device as a platform to launch on? I would even settle for recognizing an emulator, but that seems even harder.

    Read the article

  • Syslog/kernlog filling up with "did not claim interface N before use"

    - by Wayne Werner
    As I discovered when asking this question, it appears that demond_nscan is trying to use a device without claiming it. And it does it.... hundreds of time per second apparently. This makes kern.log and syslog huge (100GB ). In this particular case the problem is directly a result of some Lexmark drivers that were installed (found at /usr/local/lexmark/unix_scan_drivers/bin/demond_nscan). Here are a few things I know: The drivers are for an all-in-one printer/scanner device. There was a previous lexmark printer-only that was installed with CUPS This driver was the one for CUPS systems, and I think that it automatically added it to the list of printers in CUPS. The issue started spamming kern/syslog only after these drivers were installed, using the lexmark installers While googling around I found this thread that's not completely related, but it does mention that it might be happening when two drivers try to control the same device at the same time. How can I resolve this issue so that either I only have one driver, or get the driver to claim the device before usage?

    Read the article

  • Encrypting a non-linux partition with LUKS.

    - by linuxn00b
    I have a non-Linux partition I want to encrypt with LUKS. The goal is to be able to store it by itself on a device without Linux and access it from the device when needed with an Ubuntu Live CD. I know LUKS can't encrypt partitions in place, so I created another, unformatted partition of the EXACT same size (using GParted's "Round to MiB" option) and ran this command: sudo cryptsetup luksFormat /dev/xxx Where xxx is the partition's device name. Then I typed in my new passphrase and confirmed it. Oddly, the command exited immediately after, so I guess it doesn't encrypt the entire partition right away? Anyway, then I ran this command: sudo cryptsetup luksOpen /dev/xxx xxx Then I tried copying the contents of the existing partition (call it yyy) to the encrypted one like this: sudo dd if=/dev/yyy of=/dev/mapper/xxx bs=1MB and it ran for a while, but exited with this: dd: writing `/dev/mapper/xxx': No space left on device just before writing the last MB. I take this to mean the contents of yyy was truncated when it was copied to xxx, because I have dd'd it before, and whenever I have dd'd to a partition of the exact same size, I never get that error. (and fdisk reports they are the same size in blocks). After a little Googling I discovered all luksFormat'ted partitions have a custom header followed by the encrypted contents. So it appears I need to create a partition exactly the size of the old one + however many bytes a LUKS header is. What size should the destination partition be, no. 1, and no. 2, am I even on the right track here? UPDATE I found this in the LUKS FAQ: I think this is overly complicated. Is there an alternative? Yes, you can use plain dm-crypt. It does not allow multiple passphrases, but on the plus side, it has zero on disk description and if you overwrite some part of a plain dm-crypt partition, exactly the overwritten parts are lost (rounded up to sector borders). So perhaps I shouldn't be using LUKS at all?

    Read the article

  • How to setup HDMI output on m11x with Nvidia GeForce GT 540M? (Bumblebee) Help?

    - by Alexander Tritan
    I have an Alienware m11x with Optimus Technology. I setup (Fresh Install) Ubuntu 12.04 with bumblebee as below. Please help me set up the HDMI output so that I can connect it to my monitor. $ uname -a Linux ubuntu 3.2.0-24-generic-pae #39-Ubuntu SMP Mon May 21 18:54:21 UTC 2012 i686 i686 i386 GNU/Linux $ lspci | grep -i vga 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev a1) $ dpkg --get-selections bumblebee install bumblebee-nvidia install $ bumblebeed -version bumblebeed --version bumblebeed (Bumblebee) 3.0 Copyright (C) 2011 The Bumblebee Project Should xrandr normally show HDMI? $ xrandr -q Screen 0: minimum 320 x 200, current 1366 x 768, maximum 8192 x 8192 LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 256mm x 144mm 1366x768 60.0*+ 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) $ cat /etc/X11/xorg.conf Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nvidia Section "ServerLayout" Identifier "Layout0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" Option "NoLogo" "true" Option "ConnectedMonitor" "DFP" EndSection $ cat /etc/bumblebee/xorg.conf.nouveau Section "ServerLayout" Identifier "Layout0" Screen "Screen0" Option "AutoAddDevices" "true" EndSection Section "Device" Identifier "Device0" Driver "nouveau" EndSection Section "Screen" Identifier "Screen0" Device "Device0" EndSection and finally the biggest config file below: $cat /etc/bumblebee/bumblebee.conf [bumblebeed] VirtualDisplay=:8 KeepUnusedXServer=true ServerGroup=bumblebee TurnCardOffAtExit=false NoEcoModeOverride=false Driver= [optirun] VGLTransport=proxy AllowFallbackToIGC=false PMMethod=none [driver-nvidia] KernelDriver=nvidia-current Module=nvidia PMMethod=none LibraryPath=/usr/lib/nvidia-current:/usr/lib32/nvidia-current XorgModulePath=/usr/lib/nvidia-current/xorg,/usr/lib/xorg/modules XorgConfFile=/etc/bumblebee/xorg.conf.nvidia [driver-nouveau] KernelDriver=nouveau PMMethod=none XorgConfFile=/etc/bumblebee/xorg.conf.nouveau Any ideas on setting up the Optimus to output to the HDMI T.V.? I want to enable my HDMI with my GeForce GT 540M.

    Read the article

  • How to make Logitech Anywhere MX work in Ubuntu 12.X?

    - by alfC
    I have a Logitech Anywhere MX mouse (wireless), when I connect it to the computer it doesn't work. The mouse works in other computers with Windows and with Fedora 17, but it doesn't work in two different computers with Ubuntu 12.04 and 12.10. Moreover these same computers work with another Microsoft wireless mouse. So I think the combination of Logitech MX and Ubuntu doesn't play well. The dmesg log entry looks like this: [ 578.845838] usb 3-2: Product: USB Receiver [ 578.845841] usb 3-2: Manufacturer: Logitech [ 578.851625] logitech-djreceiver 0003:046D:C52B.0009: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2 [ 578.851899] logitech-djreceiver 0003:046D:C52B.0009: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32 [ 578.854518] logitech-djreceiver: probe of 0003:046D:C52B.0009 failed with error -32 Instead of the expected (taken from Fedora): [154344.634520] usb 2-1.2: Manufacturer: Logitech [154344.647935] logitech-djreceiver 0003:046D:C52B.000D: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.2/input2 [154344.653788] input: Logitech Unifying Device. Wireless PID:1017 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/0003:046D:C52B.000D/input/input21 [154344.654192] logitech-djdevice 0003:046D:C52B.000E: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1017] on usb-0000:00:1d.0-1.2:1

    Read the article

  • Java ME SDK 3.0.5 is released!

    - by SungmoonCho
      Java ME SDK 3.0.5 went live! For many months, we have been working hard to fix bugs from previous version, and add a lot of new features demanded by Java ME community. You can download the new version from this link. Please see below for more information. NetBeans Integration All Java ME tools are implemented as NetBeans plugins. Device Manager Java ME SDK now supports multiple device managers. You can switch between different versions of device managers. LWUIT 1.5 Support The Resource Editor is available from the Java ME menu to help you design and organize resources for LWUIT applications. For a description of LWUIT 1.5 features, visit the LWUIT download page Network Monitor Integrated with NetBeans profiling tools, the Network Monitor now supports WMA, SIP, Bluetooth and OBEX, SATSA APDU and JCRMI, and server sockets. CPU Profiler Now uses standard NetBeans profiling facilities to view snapshots. Profiling of VM classes can also be toggled on or off. WURFL Device Database The database has been updated with more than 1000 new devices. Tracing - New tracing functionality now includes CLDC VM events, and monitors events such as exceptions, class loading, garbage collection, and methods invocation. New or updated JSR support - Includes support for JSR 234 (Advanced Multimedia Supplements), JSR 253 (Mobile Telephony API), JSR 257 (Contactless Communication API), JSR 258 (Mobile User Interface Customization API), and JSR 293 (XML API for Java ME).

    Read the article

  • Accessing host LVM partition from Windows XP through Virt.manager 0.8.5 / Qemu / KVM

    - by Nico de Smidt
    Hi, requested use case is having a Windows XP SP3 guest running in 64bit Ubuntu. (Linux pcs 2.6.35-22-server #35-Ubuntu SMP Sat Oct 16 22:02:33 UTC 2010 x86_64 GNU/Linux) I want this guest to access an LVM LV on the Ubuntu disk. I've setup the following LVM config: --- Logical volume --- LV Name /dev/storage/sdc1 VG Name storage LV UUID Zg5IMC-OlqB-prL5-fgg4-3A9A-OgKP-oZ0QkJ LV Write Access read/write LV Status available # open 0 LV Size 1.01 GiB Current LE 259 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:3 -- 1) I've setup a storage pool for /dev/storage 2) I've mkfs.vfat /dev/storage/sdc1 3) and made a virtual IDE disk in the virt-manager setup for the guest. Target device: IDE Disk 2 Source path: /dev/storage/sdc1 -- Now when running XP (guest) Windows sees a new disk in Disk Manager and want's to install a partition on it, since it believes the drive is empty. After formatting from within Windows I can put data on the new disk volume. -- Back in Ubuntu however I cannot access this this any more since it created a partition within an LVM Logical Volume. Running fdisk -l shows the following: root@pcs:/media# fdisk -l /dev/storage/sdc1 Disk /dev/storage/sdc1: 1086 MB, 1086324736 bytes 32 heads, 63 sectors/track, 1052 cylinders Units = cylinders of 2016 * 512 = 1032192 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x8d72e4f4 Device Boot Start End Blocks Id System /dev/storage/sdc1p1 1 1050 1058368+ c W95 FAT32 (LBA) -- which seems fine to me, but when trying to mount /dev/storage/sdc1p1 I get the following error: mount /dev/storage/sdc1p1 /media/xp mount: special device /dev/storage/sdc1p1 does not exist which makes sense since in lvdisplay sdc1p1 does not exist Main question: I want to mount the vfat partition in both Ubuntu and XP What am I missing here????? regards, and thanks for your consideration. Nico

    Read the article

  • VGA monitor won't detect on NVIDIA Quadro NVS 4200M

    - by tanmayk
    I am on a Dell Latitude E6420 and just installed 12.04. When I plug in my external monitor's VGA cable, the laptop doesn't detect any new monitor. Here's the output of my lspci: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:16.3 Serial controller: Intel Corporation 6 Series/C200 Series Chipset Family KT Controller (rev 04) 00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation QM67 Express Chipset Family LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF119 [Quadro NVS 4200M] (rev a1) 01:00.1 Audio device: NVIDIA Corporation HDMI Audio stub (rev a1) 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 (rev 34) 0b:00.0 SD Host controller: O2 Micro, Inc. Device 8221 (rev 05) 0b:00.1 Mass storage controller: O2 Micro, Inc. Device 8231 (rev 03) I tried installing the Quadro NVS 4200M from the nvidia website but got stuck in TTY after the installation finished. Any ideas as to how I can get the external monitor to work? Thanks!

    Read the article

  • VirtualBox: Why are some USB devices disabled?

    - by torbengb
    Overview: My Host OS is Ubuntu 10.10 and guest OS is WinXP on the VirtualBox version downloaded from Oracle including "VirtualBox 4.0 Oracle VM VirtualBox Extension Pack" so that USB passthrough works. This works in general (I was able to back up my iPhone to iTunes in the guest OS), but some devices aren't available even though they're ptrovided in the VirtualBox settings. Specifics: In the VirtualBox settings for the guest OS, there's the part where you can select which of your USB devices should be visible to the guest OS. I've selected several devices including the iPhone. So far so good. Then an iOS upgrade came along; my iPhone is now in DFU mode (or recovery mode?) and represents itself not as "iPhone" but as "iPhone (DFU mode)". I have now also added this device to the list of USB devices that the guest OS should see -- but it doesn't see this device. Questions: Am I right in expecting that the guest OS ought to see the DFU device when I add it in the VirtualBox settings? What steps do I need to take so that the guest OS will really see the DFU device?

    Read the article

  • Decoupling software components via naming convention

    - by csteinmueller
    I'm currently evaluating alternatives to refactor a drivermanagement. In my multitier architecture I have Baseclass DAL.Device //my entity Interfaces BL.IDriver //handles the dataprocessing between application and device BL.IDriverCreator //creates an IDriver from a Device BL.IDriverFactory //handles the driver creation requests Every specialization of Device has a corresponding IDriver implementation and a corresponding IDriverCreator implementation. At the moment the mapping is fix via a type check within the business layer / DriverFactory. That means every new driver needs a) changing code within the DriverFactory and b) referencing the new IDriver implementation / assembly. On a customers point of view that means, every new driver, used or not, needs a complex revalidation of their hardware environment, because it's a critical process. My first inspiration was to use a caliburn micro like nameconvention see Caliburn.Micro: Xaml Made Easy BL.RestDriver BL.RestDriverCreator DAL.RestDevice After receiving the RestDevicewithin the IDriverFactory I can load all driver dlls via reflection and do a namesplitting/comparing (extracting the xx from xxDriverCreator and xxDevice) Another idea would be a custom attribute (which also leads to comparing strings). My question: is that a good approach above layer borders? If not, what would be a good approach?

    Read the article

  • 12.04 No Sound - ALC888 / Radeon 3200HD

    - by Ross
    Evening all. I have a MSI U230 netbook, MV40 processor, 4Gb RAM with integrated ATI Radeon 3200HD grahics & an ALC888 codec integrated soundcard. It has HDMI out as well. I've tried a few distro's and have been around linux for a short time. I reckon I've settled on Ubuntu 12.04 (32bit) due to it doing pretty much everything I want it to. I'm working with a fresh install right now. I recently re-installed when I was going in circles trying to solve my problem before. I install Ubuntu and it works, except for the sound. I have tried things like reinstalling Alsa, editing my asound.conf file, installing HDA Verb and a few other things. Its at the point where I need to ask for help... Some outputs: ross@ross:~$ aplay -l ** List of PLAYBACK Hardware Devices ** card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 ross@ross:~$ uname -r 3.2.0-34-generic-pae ross@ross:~$ lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS780M/RS780MN [Mobility Radeon HD 3200 Graphics] ross@ross:~$ lspci | grep Audio 00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA) 01:05.1 Audio device: Advanced Micro Devices [AMD] nee ATI RS780 HDMI Audio [Radeon HD 3000-3300 Series] Added options snd-hda-intel position_fix=1 to alsa-base.conf file Unmuted all in alsamixer Can anyone suggest anything more?

    Read the article

  • How can I get multitouch enabled on my Sentelic touchpad (msi x350 notebook)?

    - by Jon
    I understand my MSI x350 notebook comes with a Sentelic trackpad, which supports multi-touch (according to the MSI website). Is there a way to enable multitouch on Ubuntu? I've been having difficulty finding info about this on google, and since it's not a synaptics touchpad I haven't been able to find much info in ubuntu docs. My mouse preferences doesn't have a trackpad tab like it does on, say, a Macbook. Running "xinput list" returns: FSPPS/2 Sentelic FingerSensingPad id=11 And in my Xorg.0.log: [ 17.481] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/event6) [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Applying InputClass "evdev pointer catchall" [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: always reports core events [ 17.481] () FSPPS/2 Sentelic FingerSensingPad: Device: "/dev/input/event6" [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found 11 mouse buttons [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found scroll wheel(s) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Found x and y relative axes [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: Configuring as mouse [ 17.500] () FSPPS/2 Sentelic FingerSensingPad: YAxisMapping: buttons 4 and 5 [ 17.500] (**) FSPPS/2 Sentelic FingerSensingPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 17.500] (II) XINPUT: Adding extended input device "FSPPS/2 Sentelic FingerSensingPad" (type: MOUSE) [ 17.500] (II) FSPPS/2 Sentelic FingerSensingPad: initialized for relative axes. [ 17.500] (II) config/udev: Adding input device FSPPS/2 Sentelic FingerSensingPad (/dev/input/mouse0)

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >