Search Results

Search found 10603 results on 425 pages for 'device emulation'.

Page 91/425 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Passing multiple sets of arguments to a command

  - by Alec

  instances contains several whitespace separated strings, as does snapshots. I want to run the command below, with each instance-snapshot pair. ec2-attach-volume --instance $instances --device /dev/sdf $snapshots For example, if instances contains A B C, and snapshots contains 1 2 3, I want the command to be called like so: ec2-attach-volume -C cert.pem -K pk.pem --instance A --device /dev/sdf 1 ec2-attach-volume -C cert.pem -K pk.pem --instance B --device /dev/sdf 2 ec2-attach-volume -C cert.pem -K pk.pem --instance C --device /dev/sdf 3 I can do either one or the other with xargs -n 1, but how do I do both?

  Read the article

• A can ping B, B can ping C but A cant ping C. How do i connect A to C (ethernet)?

  - by user16654

  I have a computer at home with ip 192.168.221.xxx I have another computer at work that I can ping and it has 2 ip addresses: 192.168.1.xxx and 192.168.0.xxx. Those last 2 addresses have the same gateway ie 192.168.1.1 . The computer at work is connected to a hub. That hub also has an embedded device connected to it with address 192.168.0.xxx Now from my home computer I cannot ping this embedded device. How would I connect to it without changing the subnetwork it connects to? I can ping the embedded device from my work computer and I can ping the work computer from my home computer. So I am trying to connect to the embedded device from my home computer through my work computer. Port forwarding? how would I establish that on Ubuntu?

  Read the article

• No surround sound over HDMI

  - by Chris A

  I have my Pioneer receiver hooked up to my AMD HD4600m which supports audio output over HDMI. I used to work fine, however, after a recent driver update, it will only output stereo sound. It used to output 5.1 surround sound perfectly. Windows does not seem to recognize the device as capable of 5.1. In the past, 5.1 was given as an option in the configuration window, like this: I can not get it to properly recognize the capabilities of the device. I have tried uninstalling the relevant audio device in device manager, and I have also completely removed and reinstalled the display driver. Any suggestions would be greatly appreciated. Thanks

  Read the article

• Recurring Apache 2.0.52 error on CentOS 4 - 'could not create `rewrite_log_lock`'

  - by warren

  I have been seeing a recurring issue on my web server: [Sun May 16 03:10:19 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed [Sun May 16 04:10:05 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed [Sun May 16 05:10:04 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed [Sun May 16 05:17:13 2010] [crit] (28)No space left on device: mod_rewrite: could not create rewrite_log_lock Configuration Failed So far, the only fix I have found to this when it happens is to reboot my server. This is non-ideal :-\ Restarting httpd does not clear the error. df indicates I have 20+ gigs free, and top and free both report 800+ megs (or 1.2 gigs) > df -h Filesystem Size Used Avail Use% Mounted on /dev/simfs 40G 18G 23G 44% / # > free total used free shared buffers cached Mem: 1474560 300832 1173728 0 0 0 -/+ buffers/cache: 300832 1173728 Any ideas on why this would recur, and how to prevent/fix it?

  Read the article

• Apollo linux boot into single user

  - by Spirit

  We have a device that runs Appolo Linux and I have to boot that device into a single user mode so that i can run a fsck to check the hard drive for errors. I've been goggling this during the past hour and so far I haven't found any specific method on how can I do that on this version on Linux. The device is known formerly as a NFX Cinxi One - now re-branded into BlackStratus LOG Storm. If any of you have any experience with this one you may know it is a device that is used to collect logs from other servers. I know that the above info isn't much but that is everything that I can provide up until now since tomorrow I have to follow up closely on this problem.

  Read the article

• Could not load drivers - Code 31

  - by alexander7567

  I get this error when installing any network adapter on my computer: The device is not working properly because Windows cannot load the drivers required for this device. (Code 31) I have tried many different adapters and many different drivers. Any ideas? OS: Windows XP Home SP3 Here is the Hardware IDs for the onboard NIC: PCI\VEN_8086&DEV_1050&SUBSYS_2019107B&REV_02 PCI\VEN_8086&DEV_1050&SUBSYS_2019107B PCI\VEN_8086&DEV_1050&CC_020000 PCI\VEN_8086&DEV_1050&CC_0200 Device Manager Screenshot

  Read the article

• Windows XP cannot read DVD burned on Ubuntu

  - by webcrawl

  The story : I have burned a DVD disc on Ubuntu using Brasero. When file burning was complete, I canceled the burning of checksum to DVD. Then I put that DVD on Windows XP (SP3) and copied all the files from DVD to the hard drive (no errors when copying). When that was done I discovered that all copied files are not readable. What is more, all the files on that DVD also shown to be not readable, even though all file names, directories were in their place. What I found out? Windows detect that the disc is in CDFS (CD-ROM File System). Disc is clean as new, have no scratches. All files while opened in Notepad++ look like "NULNULNULNULNUL" in one line. The size of files is normal. Other discs that are recognized as CDFS can be read with no problems. What I tried? Starting CDFS service in Windows registry. Result - a new device in Windows Device Manager (JUBS JGH2ZCT SCSI CdRom Device). Removing my CD/DVD device from Device Manager. Result - Windows restarted the system and reinstalled the driver. So... how to read the DVD, when I have no access to any other PC, any other OS?

  Read the article

• Creating ip alias on bonded interface ie. bond0:1

  - by bobothechimp

  System: HP Proliant DL360 G5 running CentOS 5.4 Bonded interface is working fine for a long time. I just went to add an alias the way I always have on a regular interface, and on first check it works (pinging on the local box) but it is not accessable from outside (iptables is turned off). In addition with this setup the normal network response started to decline, hanging for around a minute before I could get a prompt on login. Here are my config files: [root network-scripts]# cat ifcfg-eth0 DEVICE=eth0 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-eth1 DEVICE=eth1 BOOTPROTO=none ONBOOT=yes MASTER=bond0 SLAVE=yes USERCTL=no [root network-scripts]# cat ifcfg-bond0 DEVICE=bond0 BONDING_OPTS="mode=1 miimon=100" BOOTPROTO=none ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.11 USERCTL=no [root network-scripts]# cat ifcfg-bond0:1 DEVICE=bond0:1 BOOTPROTO=static ONBOOT=yes NETWORK=10.2.1.0 NETMASK=255.255.255.0 IPADDR=10.2.1.12 USERCTL=no any thoughts?

  Read the article

• How do I use different audio devices for different apps in Windows 8?

  - by Eclipse

  Besides switching the default audio device, how can I send the audio from one app (say x-box music) to one audio device, and another (say the video app) to another audio device? Edit: Looking further, I found this: http://channel9.msdn.com/Events/BUILD/BUILD2011/APP-408T At 16:16, he demonstrates exactly what I'm wanting to do, but when I go to the devices charm, I get a message: "You don't have any devices that can receive content from Music".

  Read the article

• How to duplicate a backup set from one media server to another

  - by MathematicalOrchid

  I really honestly can't figure out how to do this. It's easy enough to open Backup Exec and tell it to duplicate the data on one local device onto another local device. What I cannot figure out how to do is make it duplicate data from one local device to a remote device. I can connect to the remote BE server, but then I can only access the remove devices. I can connect to the local BE server, but then I can only access the local devices. I can't figure out how the heck to get access to both local and remove devices simultaneously. Symantec Backup Exec 12.5 for Windows, in case it matters.

  Read the article

• VirtualBox: Grub sees hard drive, Linux does not

  - by thabubble

  I installed Linux on my second hard drive. I can boot to it just fine. But when I try to boot it from a Windows 7 host using http://www.virtualbox.org/manual/ch09.html#rawdisk, grub sees it and can load vmlinuz and initramfs. Log: :: running early hook [udev] :: running hook [udev] :: Triggering uevents... :: running hook [plymouth] :: Loading plymouth...done. ... Waiting 10 seconds for device /dev/disk/by-uuid/{root UUID} ... ERROR: device 'UUID={root UUID}' not found. Skipping fsck. ERROR: Unable to find root device 'UUID={root UUID}' It then drops me into a recovery shell. I checked "/etc/fstab" and it's empty, there are also no sd* devices in dev, the only thing in /dev/disk/by-id is a VBox CD device. I'm not too good with these kinds of things so help would be greatly appriciated.

  Read the article

• How do I setup a proper VPN for my friends to play LAN games AND give them internet access?

  - by Gizmo

  I'm trying to setup a VPN on my local network, but everyone who connects to me DOES have access to my laptop but not to the internet or other devices on the network. How can I properly configure my VPN on windows to work correctly (giving internet + access to all devices on my network to the remote pc)? Or is there software on windows which makes creating a VPN server easier? or maybe a VMWare image linux vpn server? I can't find any of those! My requirement is that my friends don't have to install additional software, they have to be able to connect with default windows stuff. My OS is Windows 8 Standart edition (not pro or enterprise) OEM. Most of my friends have also windows 8, some windows 7. Extra info: My device is DMZ'ed (Demilitarized Zone, [disabled NAT on my device so it's accessible on the WAN]) I can access files, websites and services on other devices on my network, and all devices can access file shares, website and all other services on my device When enabling VPN everything works except the client is unable to get internet access or access to any device on my network, client has only access to my device.

  Read the article

• Mouse Error Code 24. Windows 7

  - by Cj.

  I've had the same mouse for a while, and it's been working fine until one day, it started giving me a message about a device not working properly. I tried updating the drivers, and re-installing, I even deleted old drivers in case my computer should be a little confused. It never made a difference, and my mouse seemed to be working just fine despite getting the permanent error in my device manager, I looked it up several times online, but I never found anything I could actually use, when I go to official websites, I always get the same response "plug in so so into a different place - drivers - install silverlight before you can watch this tutorial, try it on a different machine". so I gave up on that. But now is where I have a real problem, lately, my little strange error evolved into a fullblown Error 24, and my mouse is starting to turn on and off randomely, especially when it is being used, but I do hear it go "badum..dadum" when I'm off doing something else. when I looked up error code 24, I really didn't find much other than it meaning: Code 24 This device is not present, is not working properly, or does not have all its drivers installed. (Code 24) Cause The device is installed incorrectly. The problem could be a hardware failure, or a new driver might be needed. Devices stay in this state if they have been prepared for removal. After you remove the device, this error disappears. But, I have tried uninstalling the device entirely several times, and it'll go right back to its previous state with error 24, and turning on and off randomely. what do I do? I cannot afford taking it to a repair place, I can't really afford a new mouse either, I refuse to buy cheap ones as I am a gamer, in need of more than 3 buttons, and a good grip is important. Could there possibly be some confusion in the registry? I do remember having gotten some early problems after I converted my vista to windows7. But I hardly dare going in there unless I'm 100% certain of what I'm going for, and I can honestly say I am at a loss here. Edit: it is a USB mouse we're talking about here. MX™518 Optical Gaming Mouse (logitech) Edit2: I am seeing no rupture, so it must be on the inside of my mouse, or inside the rubber, protecting the cable, that would be really inconvenient to search for

  Read the article

• Status: 0xc00000e9

  - by Ryan Galloza

  When I start up windows normally it just freezes , I click "Launch Startup Repair" I get this: "Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer" How do I fix this problem?

  Read the article

• Can my PC run Need for Speed Shift

  - by John

  Here are my PC's specs: Operating System MS Windows 7 32-bit CPU Intel Mobile Core 2 Duo T8100 @ 2.10GHz Penryn 45nm Technology RAM 3.0GB Dual-Channel DDR2 @ 332MHz 5-5-5-15 Motherboard Sony Corporation VAIO (N/A) Graphics Nvidia Defaul @ 1280x800 256MB GeForce 8400M GT (Sony) Hard Drives 250GB Hitachi Hitachi HTS542525K9SA00 ATA Device (IDE) Optical Drives Optiarc DVD RW AD-7560A ATA Device Audio High Definition Audio Device

  Read the article

• Portforwarding Combine Several Ports

  - by kiraitachi

  Hi I got a Raspberry Pi at A.A.A.B in my local network and I have set up a DMZ on my router so that any incoming traffic that comes to my router gets redirected to my raspberry pi wich I can connect via NO-IP adress. The problem is that I want to set up portforwarding since i got several services running on my Pi like SSH, torrent webgui, webalbum, etc. I had this already done before long time ago, but I forgot a bit the syntax and cant get to set it up. Router Help says: The Application allows you to do port forwarding, but only have the ports open when data flowing out of the trigger ports. When a program sends data out on outgoing ports called trigger ports, the device then allows incoming data on the open ports specified in your port triggering configuration. 1.Trigger Port Start Trigger Port Start Specify the start port on the device that would trigger the device to open ports for incoming data. 2.Trigger Port End Specify the end port on the device that would trigger the device to open ports for incoming data. You can enter a port number the same as the trigger port start or enter a larger port number to specify a port range. 3.Trigger Traffic Protocol Type Select the trigger traffic type. Open Port Specify all the ports to be opened. It's content could be: A single port only. A port range only. Start open port number and end port number should be separated by "-" . Combined several single port and several port ranges. Each single port or port range should be separated by "," . Open Traffic Protocol Type Select the open traffic type. This are the fields: http://es.tinypic.com/view.php?pic=n5lv1k&s=8 I think this is the syntax 1-7999,8001-9090,9092-65535. But each time I want to add it gives me an error. Any ideas?

  Read the article

• How to "eject" non-existing USB drive from Windows 7 host?

  - by gencha

  I use a USB key which is encrypted with BitLocker to store various data. I keep that key with me all the time. What happens all the time is that I send my home computer to hibernate without ejecting the USB key first. Then I unplug the key and take it with me to work. When I get home, I resume my Windows session and even though the key is not plugged in, the drive still appears as mounted on the system. I can also unmount the non-existing device with mountvol, but that only removes the drive letter. Windows will still think the device is plugged in. When I plug the key in, nothing happens. The device's class ID is listed in mountvol output, but the device is not listed in the Disk Management panel.

  Read the article

• Windows 7 boot manager not localized on UEFI systems

  - by Massimo

  I originally posted this on SuperUser because I discovered this behaviour on my home computer, but this seems to be a general issue on UEFI systems, thus I'm posting here too; I also hope someone here can shed some light on what's going on. Italian version of Windows 7 x64 SP1, same installation media used for both situations. When running on BIOS systems, the boot manager is fully localized, both for the loading screen and for the F8 boot menu. When running on UEFI systems, the boot manager always runs in English, even if it's correctly configured to use the it-IT locale, as BCDEDIT clearly shows: Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Caricatore di avvio di Windows ------------------- identificatore {current} device partition=C: path \Windows\system32\winload.efi description Windows 7 locale it-IT inherit {bootloadersettings} recoverysequence {9ef36aa8-4188-11e3-909d-d32f0c3871c8} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} nx OptIn I also noticed something strange here; the motherboard setup shows "Windows Boot Manager" as the main boot option, while the actual boot disk is listed as the second one. Looks like the Windows Boot Manager is actually being loaded from somewhere else than the first partition of the first disk... what's going on here? Update I've also checked the EFI boot manager using bcdedit /enum FIRMWARE. That one looks correctly localized, too: Boot Manager per firmware --------------------- identificatore {fwbootmgr} displayorder {bootmgr} {9ef36aa4-4188-11e3-909d-d32f0c3871c8} {a30e8550-47e4-11e3-9ad1-806e6f6e6963} timeout 1 Windows Boot Manager -------------------- identificatore {bootmgr} device partition=\Device\HarddiskVolume1 path \EFI\Microsoft\Boot\bootmgfw.efi description Windows Boot Manager locale it-IT inherit {globalsettings} default {current} resumeobject {9ef36aa6-4188-11e3-909d-d32f0c3871c8} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Applicazione firmware (101fffff) ------------------------------- identificatore {9ef36aa4-4188-11e3-909d-d32f0c3871c8} description CD/DVD Drive Applicazione firmware (101fffff) ------------------------------- identificatore {a30e8550-47e4-11e3-9ad1-806e6f6e6963} description Hard Drive

  Read the article

• Wi-Fi or Bluetooth to USB converter

  - by yerzhik

  Is there a device, that works without a driver, you just connect it as usb, and receive any signal sent to it as if it were COM Port wired connection? For example, such a device that gets data sent to it by Wi-Fi network or Bluetooth and resends it to the USB. Of course it has to be set up once (network name, password etc) and for this purpose you need a driver, but once it is set up, you can use it at any computer without a driver. I have a Bluetooth USB, but I think it can't work without a driver. By just connecting it to any computer you can't find it in device list on another bluetooth device (as phone, etc).

  Read the article

• When using software RAID and LVM on Linux, which IO scheduler and readahead settings are honored?

  - by andrew311

  In the case of multiple layers (physical drives - md - dm - lvm), how do the schedulers, readahead settings, and other disk settings interact? Imagine you have several disks (/dev/sda - /dev/sdd) all part of a software RAID device (/dev/md0) created with mdadm. Each device (including physical disks and /dev/md0) has its own setting for IO scheduler (changed like so) and readahead (changed using blockdev). When you throw in things like dm (crypto) and LVM you add even more layers with their own settings. For example, if the physical device has a read ahead of 128 blocks and the RAID has a readahead of 64 blocks, which is honored when I do a read from /dev/md0? Does the md driver attempt a 64 block read which the physical device driver then translates to a read of 128 blocks? Or does the RAID readahead "pass-through" to the underlying device, resulting in a 64 block read? The same kind of question holds for schedulers? Do I have to worry about multiple layers of IO schedulers and how they interact, or does the /dev/md0 effectively override underlying schedulers? In my attempts to answer this question, I've dug up some interesting data on schedulers and tools which might help figure this out: Linux Disk Scheduler Benchmarking from Google blktrace - generate traces of the i/o traffic on block devices Relevant Linux kernel mailing list thread

  Read the article

• udev rule not being executed

  - by jyavenard

  I have the following device that udevadm lists as: looking at device '/devices/pci0000:00/0000:00:1c.7/0000:09:00.0/usb6/6-2/6-2:1.0/ttyUSB0/tty/ttyUSB0': KERNEL=="ttyUSB0" SUBSYSTEM=="tty" DRIVER=="" looking at parent device '/devices/pci0000:00/0000:00:1c.7/0000:09:00.0/usb6/6-2/6-2:1.0/ttyUSB0': KERNELS=="ttyUSB0" SUBSYSTEMS=="usb-serial" DRIVERS=="pl2303" ATTRS{port_number}=="0" looking at parent device '/devices/pci0000:00/0000:00:1c.7/0000:09:00.0/usb6/6-2/6-2:1.0': KERNELS=="6-2:1.0" SUBSYSTEMS=="usb" DRIVERS=="pl2303" ATTRS{bInterfaceNumber}=="00" ATTRS{bAlternateSetting}==" 0" ATTRS{bNumEndpoints}=="03" ATTRS{bInterfaceClass}=="ff" ATTRS{bInterfaceSubClass}=="00" ATTRS{bInterfaceProtocol}=="00" ATTRS{supports_autosuspend}=="1" So I created the rule: KERNEL=="ttyUSB0", SUBSYSTEM=="tty", SUBSYSTEMS=="usb-serial", DRIVERS=="pl2303", KERNELS=="6-2:1.0", SYMLINK+="cc128serial" this doesn't work. However if I do: KERNEL=="ttyUSB0", SUBSYSTEM=="tty", SUBSYSTEMS=="usb-serial", DRIVERS=="pl2303", SYMLINK+="cc128serial" then it works. I tried with KERNELS=="6*" etc.. to no available any ideas ? thanks

  Read the article

• Which scripting language to use to asynchronously ssh into equipment, run several commands, parse the output, and save to a file on my computer?

  - by Fujin

  There are several points I'd like to stress in my question. I'd like to login by asynchronously ssh'ing into our infrastructure equipment. Meaning, I do not want to connect to only one device, do all the tasks I need, disconnect, then connect to the next device. I want to connect to several devices at once in order to make the process as fast as possible. By equipment I mean 'infrastructure equipment' and not servers. I say this because I will not have the luxury of saving files to the device then transferring them to myself with scp or another method. The output of the scripts that are run will have to be saved directly to my computer. The output of the commands that are run will need to be cleaned up and parsed. Also I want the outputs of each device to be combined into one nice and neat file, not a separate file for each device. This will all be done from a linux box, using ssh, into devices that all use linux'ish proprietary OSes. My guess is the answer to my question will either be a Bash, Perl, or Python script but I figured it wouldn't hurt to ask and to hear the reasons why one way is better than another. Thanks everyone. EXTRA CREDIT: With you answer, include links to resources that will help create the script I described in the language that you suggested.

  Read the article

• Two 24' displayed vertically in Ubuntu

  - by QuinnBaetz

  I just got two 24' inch monitors, and want them to display vertically side by side. I got one to but can't figure out the command to get them both vertical and displaying. xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 3840 1200 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection xrandr: Screen 0: minimum 320 x 200, current 3840 x 1200, maximum 3840 x 1200 VGA connected 1920x1200+0+0 (normal left inverted right x axis y axis) 519mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 TMDS-1 connected 1920x1200+1920+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.0 60.0 800x600 75.0 60.3 640x480 75.0 59.9 720x400 70.1 any clue on the command to make them vertical? Thanks!

  Read the article

• Fixed or consistent mount location for a USB hard drive

  - by Journeyman Geek

  I store my music on an external hard drive, and play them with foobar2k. However, the drive letter changes, which usually means I need to rebuild a fairly large playlist every so often. I'm wondering if there's a way to reserve a drive letter for a specific external device (or type of device) by device ID or volume name, or if I'm better off using a NTFS mount point, and re-mounting the drive to a folder each time. I'm using either a Windows XP or 7 system, and the external drive is NTFS.

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >