Search Results

Search found 11077 results on 444 pages for 'floppy drive'.

Page 92/444 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Gigabyte GA-P55A-UD4P won't boot from USB drive with RAID enabled

  - by Daniel Schaffer

  I've got a Windows 7 installation image on my USB hard drive, which is set up to be bootable. I know it works because I've used it on several computers, and it works on the computer I'm trying to install as long as the RAID controller is disabled. However, when I enable the RAID controller and attempt to boot from the USB driver, it hangs for 30-60 seconds and then gives me the "disk boot failure, insert system disk" error like it can't find any OS. Just for laughs, I disabled the RAID controller again and it booted fine. I'm having separate, unrelated issues burning a dvd with the ISO, so I would prefer to get this working.

  Read the article

• How to increase hard drive transfer speed

  - by atif089

  This is my motherboard GA-M61PME-S2 (SATA upto 3.0 Gbps) and This is my Hard Disk Samsung hd502hi Capacity 500 GB Cache 16MB Disks / Heads 1 / 2 Interface SATA 3Gb/s Spindle Speed 5400 RPM Sustained Data Rate OD 100 MB/s Average Seek 8.9 ms Average Latency 5.56 ms Data Transfer Rate 300 MB/sec Weight 470 grams Power: Idle / Seek / R-W / Spin-up 3.9W / 4.8W / 5.1W / ~24W Acoustics (sound power) 2.2 / 2.7 Bel (idle / quiet seek / performance seek) When I copy things from one partition to another they transfer at a maximum of 30 MBps. However the drive supports upto 300 MBps right ? How do I increase the transfer speeds? P.S - Using Windows XP, All partitions are NTFS.

  Read the article

• USB Thumb Drive not recognized in Hyper-V Manager

  - by Vazgen

  I have the free, standalone core Hyper-V Server 2012 running on my physical machine. I set up remote management from my Windows 8 client. When I proceed to create a virtual machine I would like to install the OS from a usb thumb drive but it is not recognized in Hyper-V Manager on my client (when the USB is plugged into the physical server) nor is it recognized in Server Manager under File and Storage Services Volumes Is there a role needed to recognize external usb flash drives? Because I think this standalone version is just core Hyper-V role and that's it... but this is such a basic functionality. Can anybody comment.

  Read the article

• unzip file on small drive

  - by David Oneill

  I have a zip file that contains many files. Each file in the zip file is about 100MB, and is compressed about 10% (IE it is about 90MB in the zip file). The whole zip file is 20GB, and I'm trying to unzip it onto a drive that has only 30GB free. On Windows 7, how can I unzip a zip file on my laptop's harddrive that doesn't have enough space for both the zipped and unzipped copies of the file? IE can I tell windows to remove stuff from the zip file as it is uncompressed?

  Read the article

• Server only powers (but doesn't POST) when IDE drive is powered

  - by Jookia

  So after a thunderstorm last night which did a little damage, a Gigabyte server has decided it's going on power on but not POST. If it is POSTing, it's doing a very bad job at telling me. No beeps, nothing. Power seems to reach the components though. CD Drive opens and closes. So after stripping it back, I've found that the difference between this behaviour and deciding it's not going to power on for more than half a second, is having a power cable plugged in to one of the IDE hard drives. Is this normal, or a sign that the PSU has had it?

  Read the article

• How many hardlinks in a drive?

  - by acidzombie24

  I made a backup of one of my external drives to another. They are both NTFS filesystems. I moved ALL disk contents into a folder called a and right clicked to get file/folder/size count. They are exactly the same. However windows reports J having 1.33gb (backup) and Q: as 521mb. Now I think maybe its because of hardlinks, I must have more on J then Q. How might I figure out how many hardlinks I have in a drive?

  Read the article

• Ultrium 3 tape drive shoe-shining, 3Mb/s: and it's not the cable

  - by mowsala

  I have a HP 960 Ultrium 3 tape drive. Since I got it, (second hand, £90) I've been experiencing shoe-shining. Writing with tar in Linux, I average about 3Mb/s write speed. I've tried replacing both the SCSI card and the cable now, both of which made no difference at all. A curiuos observation I have made is that the write rate is not consistent. Sometimes it will write for over a minute without shoeshining, but more often, just a few seconds. I've also tried several tapes, different source drives, and even writing from Windows Backup, to no avail.

  Read the article

• Formatted a Bootcamped drive as a dynamic disk, now can't boot to either Mac or Windows

  - by Steven H

  I was trying to create an extra partition to get a file from the Windows side of my Macbook Air to the Mac side, and I accidentally made the disk dynamic without realizing it. I am now unable to boot to the Mac side (holding Alt to go into the system manager at startup doesn't even list the Mac partition), and the Windows side blue screens during boot (goes so quickly that it doesn't even get to the error code before restarting). What can I do to fix the issue? I don't know how to make a bootable flash drive that a Mac will recognize, and Disk Utility (via Internet Recovery) couldn't do anything. (cross-posted from apple.stackexchange)

  Read the article

• WebDAV mapped drive asking for username and password

  - by confus3d

  Since we migrated domains we're having problems with mapping a drive using a WebDAV connection in our login script. It's a simple net use x: \\server.domain.com\folder Which used to authenticate automatically (all we needed to do to make this happen was to put the server in the intranet zone in the internet explorer settings). Since the domain migration though, nearly everyone is being prompted for a username and password to connect. Does anyone have any idea how to fix this? Any help much appreciated. The webdav share is on a Windows 2003 server running IIS.

  Read the article

• Using USB drive in Windows and Linux properly

  - by sashkello

  What is the proper way of using a USB hard drive or stick between Linux and Windows? (I'm using Linux Mint 14 and Windows XP on different machines) Should I set it up somehow so that all the files are shared and reused safely between Linux and Windows? The question comes from the recent problem I had. I've created and edited a few folders through Linux and they are not working on Windows now (folder is not accessible. The file or directory is corrupt). While I dealt with that problem, what would be the way of ensuring this doesn't happen again?

  Read the article

• Adding a single 300Gb SCSI drive to poweredge 2850

  - by John Steele

  I have a 2850 setup with 3 146Gb drives, two partitions 1 12GB system with server 2003 sp2 and 1 261Gb Data. I am strapped on disk space on the data partition having to push data around. I wanted to add a 300Gb single drive for lesser critical data, is this possible? Or is it best to add 2 300Gb drives for another RAID 1 configuration? This is my church network and while it is mission critical it is not enterprise so I can take it down for a few hours. Any pointers to documentation or direct help would be greatly appreciated. John

  Read the article

• How to get the drive letter of pendrive

  - by sijith

  Hi, I want to get the drive letter of pendrive or external harddisk connected through USB. Is it possible to get the Drive letter. I am using VC++

  Read the article

• Unable to delete a directory from NTFS drive: "Access is denied"

  - by Evgeny

  I'm running Windows XP Pro x64 SP2. I have a directory on an NTFS drive that was created by a Maven build. A subsequent build attempted to delete this directory and failed. I now get the error "Access is denied" whenever I try to do anything with that directory: change to it, delete it, rename it. This happens both in Windows Explorer and from a command prompt. The properties dialog in Windows Explorer doesn't even contain the Security tab. I created the directory, so I don't think this is truly a permissions issue. I've occasionally had this error happen in the past is well. I believe the error is misleading, but the question is: what is the real problem and how do I fix it?

  Read the article

• Best way to Duplicate a Laptop's Hard Drive One-to-One

  - by Urda

  I have a Lenovo X61 Tablet computer, with a plain SATA drive inside. I have windows 7 and Ubuntu 9.10 dual booting on the computer. I want to back up both of these OS's, and their special partitions (Windows 7 has one, and of course the Linux Swap). I want a one-to-one backup, all of my mission critical data is already backed up, but I would like to get a snapshot, and store it on a larger file server at home for quick recovery. What is the best approach to do this?

  Read the article

• USB drive gets infected every time I plug it into my laptop

  - by ashwnacharya

  Whenever I plug in my USB flash drive into my laptop running Windows XP, an AutoRun.inf file gets created inside it. Also a hidden folder called "Cache" which uses the Recycle bin icon gets created. AutoRUn.inf file cannot be opened in Windows. Both the Autorun.inf file and the "Cache" folder cannot be deleted. I opened the AutoRun.inf file using Ubuntu. I saw that it is trying to run a file Cache\TMP983.exe. I ran all anti-spywares, anti-malwares, anti-viruses, USB autorun eaters, but to no avail. How do I fix this?

  Read the article

• LTO 3 tape drive needing repaired

  - by DO it all Paul

  We have an IBM LTO 3 tape drive that needs repaired and with the £400 price tag i'm having to shop around for quotes. My question is has anyone actually repaired one before and how was in done? The first error LED was showing a 6, then i cleared the mangled tape only for it to start flashing alternate 'o' on the 7 segment display, simliar to a half 8, flashing top to bottom and it would just flash away like that coupled with a flashing amber light. I tried a reset holding the eject button for it to show an 'r' the go back to flashing again as before. I checked the IBM solutions for the codes but this flashing isn't documented at all. Would be great if anyone had any experience in this area. Thank you, Paul

  Read the article

• Windows 2008 R2: can't extend C drive, mystery partitions

  - by wfaulk

  I have a Windows 2008 R2 server running under VMware ESX 4.0.0. I have reallocated disk space to it in order to extend the C drive, but Disk Management has "Extend Volume" greyed out. DISKPART shows more partitions than Disk Management shows, including one after the volume I'm trying to extend, which would explain why Disk Management isn't allowing the extension. Disk Management shows: System Reserved / 100MB NTFS / Healthy (System) (C:) / 39.39 GB NTFS / Healthy (Boot, Page File, Crash Dump) 10.00 GB / Unallocated DISKPART shows: Partition 1 Dynamic Data 992 KB 31 KB Partition 2 Dynamic Data 100 MB 1024 KB Partition 3 Dynamic Data 39 GB 101 MB Partition 4 Dynamic Data 1024 KB 39 GB My question at this point is: what the heck are partitions 1 and 4, where did they come from, why doesn't Disk Management show them, and, most importantly, can I delete partition 4 in order to extend partition 3?

  Read the article

• How can I get data off of a (probably) very corrupt drive?

  - by Mercury1964

  So, my younger brother wanted my help today. Apparently, he was helping a friend install Ubuntu to his laptop, and midway through the install (on a filled hard-drive with Windows 8, from the liveusb thing): 1) They realized that they had chosen "Erase and install" accidentally and decided the best course of action was to (in the middle of an install, remember) 2) Force shutdown the computer. After I had replaced my eyeballs back into their sockets, my bro asked if I could do anything about his friend's data, which he wanted back. This, however, drifts out of my normal comfort zone. I know this about the install: 1) It was on a fairly new Windows 8 laptop, so it had whatever filesystem it uses nowadays on the entire drive 2) They didn't choose the "zero out drive data" option 3) They stopped the install at some point (not sure if before or after wipe) I can imagine that it now has two corrupted filesystems on it (whatever Windows 8 was on and ext3) and that some of the data still exists (assuming it wasn't overwritten already). Is there anything that can be done for whatever data is left on the drive?

  Read the article

• Creating a bootable external drive in OSX

  - by Brian Postow

  I want to do some slightly dangerous testing, testing an install package I've written, so I've got an external drive, and I want to make it a bootable OSX disk, then I can boot up on the external, do my install, and if it screws things up, it doesn't actually affect the usability of my machine. The problem is that when I stick the disk that came with my computer (It's actually another computer in the office, but they're both minis) in and try to run the installer, it says "You cannot install OSx 10.6 on this computer". Now, the computer is ALREADY running 10.6, so that's a kind of silly error message... It does this when I boot to the DVDRom as well. Am I doing something really really dumb? or what?

  Read the article

• Windows 8 cloned drive in 2nd computer

  - by Mark

  I did the Windows 8 Pro upgrade machine w/ 64GB SSD. Finding 64GB not enough, I ordered a 128 GB SSD (Samsung 830) while planning to use CloneZilla to clone the Windows 8 OS to it. I might try using the 64GB SSD (with the Windows 8 upgrade on it) as a boot drive in a backup machine. I understand that I need to do some registry work to make it happy about the SSD 'transplant,' but I am worried about having to register the same activation key on 2 computers. Am I at high risk of getting 'deactivated'? Note that the backup machine is only used when primary computer is off.

  Read the article

• updating drive mapping GPO programmatically using powershell

  - by Kristoffer

  I have a Group Policy in a domain that have lots of drive mapping settings. I would like to change the path for a lot of these servers in this gpo with powershell if possible. I know i could do this via the GPMC, but would prefer to do it programtically. I have looked at the grouppolicy powershell module from microsoft (get-gpo and friends) but i only seem to be able to change registry entrys and permissions on the policys, not the actual path for the drivemapping. any ideas? Thanks!

  Read the article

• Sharing an external hard drive in Ubuntu using Samba

  - by cambraca

  /media/MYDISK is where my hard drive is mounted automatically. I created a symlink using: ln -s /media/MYDISK /home/camilo/MYDISK chmod 777 /home/camilo/MYDISK I'm setting up smb.conf like this: [myshare1] comment = external disk browsable = yes path = /home/camilo/MYDISK guest ok = yes read only = no create mask = 0775 Also, in the [global] section I tried adding the following lines: follow symlinks = yes wide links = yes unix extensions = no The problem is that when browsing the shared folder in Windows 7, I get a "\\etc\myshare1 is not accessible" error. When pointing the path to a regular folder it works fine. Also, when I point it directly to /media/MYDISK, it shows the same error. EDIT: to make it more interesting, I have no graphical interface, so I need to touch the config files directly..

  Read the article

• Data drive disappearing.

  - by Mike Keller

  We have a Windows 2003 R2 server with SP 2 here that randomly loses a partition. There are two partitions the C: and the D: (the one that disappears). When I go into Disk Management the space shows available on the drive but that it isn't formated. There are two drives that are set up in a RAID 1 array. There isn't anything sticking out in the event log as to something triggering this problem and thank god we do daily backups of the data, but it gets kind of annoying to have to go back in there and reformat the partition and restore the data. Any places I can poke around to find the cause of this or even better solutions to the problem would be appreciated.

  Read the article

• aligning truecrypt partition on 1.5TB 4kB sector drive

  - by pQd

  hi, aligning partitions to start at real physical sector of ssds / stripped raids / 4kB drives is a 'good thing to do'. but i've run into a problems when trying to do it for a truecrypt partition that will contain ext3 on it. or so it seems. when drive is question is partitioned properly and formatted with ext3 i get very reasonable write speeds around 70-80MB/s, but when i put truecrypt and ext3 on the top of it write performance becomes very unstable and goes between 1-25MB/s with very high io-wait. on the same server i dont have any performance issues with ext3 on the top of truecrypt on regular 512B-sector 500GB sata disks. so my best guess is that iowaits are caused by misalignment but i cannot really find reliable information on how to calculate optimal partition beginning. i've tried to start it at 128 logical sector, i've also tried 8132 sector as suggested here but both gave me very bad and unstable performance. do you have any experience with similar setup? thanks!

  Read the article

• External hard drive not disconnecting and leaving 'ghost drives' on my PC

  - by Shane

  I use a Seagate FreeAgent on my laptop and PC. While it works fine most of the time, sometimes when I try to safely disconnect it, it says the files are in use. Obviously I have by that time shut down all applications. Now with my laptop, a Toshiba Satellite, I shut down the computer and unplug the Seagate and no ghost drives are found. But no matter what I do with my desktop, it continues to create 'ghost drives'. Is this due to a feature in the external hard drive, and if so, would anyone have an idea how I can fix it? I am getting tired of deleting the 'ghost drives'. Both my laptop and desktop use Windows 7.

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >