Search Results

Search found 5545 results on 222 pages for 'future'.

Page 92/222 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Motherboard Issue - 3 Beep Bios (memory error) despite new RAM

  - by Glenn

  I have an Intel dG43RK motherboard, bought new and sealed, and have tried two different brands and speeds of RAM with a 3-beep BIOS indicating a memory error, which also occurs without RAM installed (as it should). The memory tried is; 1x4GB 1333 Kingston HyperX DDR3 RAM (New and Sealed) 2x4GB Team Elite 1066 DDR3 RAM (New and Sealed) I have tried multiple configurations and seating layouts and still no luck. I also have a GT520 graphics card on board as I dislike in-built graphics in most cases and had it at hand (also new and sealed). The only used parts are the CPU, which worked in my previous tower and was directly taken from the PC into the new set-up and the CPU Fan which will be replaced with a new fan in the foreseeable future once this is resolved. I've run out of ideas myself and any help is appreciated.

  Read the article

• What should I know before considering a VPS or dedicated server?

  - by Corey Sarnia

  I have a plan for the future for an application and web service. The client will have an application that will send requests to a server-side Java back-end that will process requests, and the server should also be able to host a website, preferably on a WAMP setup (which is what I'm used to; very little *nix knowledge). Now, I cannot provide any hard stats because this is only a plan that's in a discussion stage. However, we do fully expect it will scale enough to need some type of dedicated hosting. My question is this: what types of things should I know about before looking into getting hosting? What should I be asking the hosting providers before I decide on a purchase? When is it appropriate to switch from a VPS to a fully dedicated server?

  Read the article

• Xen find VBD id for physical disks

  - by Joe

  I'm starting a xen domU using xm create config.cfg. Within the config file are a number of physical block devices (LVs) which are added to the guest and can be accessed fine when it boots. However, at a point in the future I need to be able to hot unplug one of these disks using the xm block-detach command. This command, however, requires the vbd id of the device to be detached and I can't find a way to find the device id for a particular disk 'plugged in' at start up. Any help is much appreciated!

  Read the article

• How do I run multiple commands on one line in Powershell?

  - by David

  In cmd prompt, you can run two commands on one line like so: ipconfig /release & ipconfig /renew When I run this command in PowerShell, I get: Ampersand not allowed. The & operator is reserved for future use Does PowerShell have an operator that allows me to quickly produce the equivalent of & in cmd prompt? Any method of running two commands in one line will do. I know that I can make a script, but I'm looking for something a little more off the cuff.

  Read the article

• Soft links between samba profile and profile.V2

  - by Alex Rose

  I am currently using a samba server to host windows sessions. For the moment, every machine runs windows XP, but in an upcoming hardware upgrade, I will have new Windows 7 machines installed. The problem is that the user directory changed from XP to 7 (for instance 'My Documents' became 'Documents'). To solve that, samba created a folder called profile.V2, which contains files and folders for Windows 7. Now I would like to link the two profiles folders ('profile' from windows XP, 'profile.V2' from windows 7) so that a user can logon from a XP or 7 machine and still have access to the same files. I tried to create softlinks between folder pairs ('Documents' -­­ 'My documents') and it seems to work. My question is : is it likely to create issues in the future?

  Read the article

• How can I get a notification from my server if the mail queue stops

  - by Ash

  I am using QMail with Plesk 10 on an Apache server. Occasionally the mail queue stops processing emails - this most recently happenend when an email account got hacked and started sending hundreds of emails. We did not find out about this until a client of ours contacted to say that their emails were not being recieved, so we checked the mail queue and lo and behold the service had stopped. In future I would like to be notified when the mailqueue stops. How can I set something up so the server will run a command whenever the mailqueue stops?

  Read the article

• Windows 7 pagefile size with large RAM and SSD

  - by Avi

  I've just upgraded my Windows 7 machine from 12GB to 24GB - both for running more VMs and for future proofing. My C driver is an SSD with 129GB formatted size. I was surprised to find out that the SSD only has 68GB free (most of my files are on D: to G:). Researching I found 24GB of my precious C: SSD are taken for virtual memory. So - do I need such large amounts of virtual memory when I have 24GB or RAM? I bought this size of memory so I"d not have to go to disk...

  Read the article

• strategy /insights for avoiding document content loss due to encryption

  - by pbernatchez

  I'm about to encourage a group of people to begin using S-Mime and GPG for digital signatures and encryption. I foresee a nightmare of encrypted documents which can no longer be recovered because of lost keys. The thorniest issue is archiving. The natural way to preserve privacy in an archive is to archive the encrypted document. But that opens us up to the risk of a lost key when time comes to unarchive a document, or a forgotten password. After all it will be a long way in the future. This would be equivalent to having destroyed the document. First thought is archiving keys with documents, but that still leaves the forgotten pass phrase. Archiving the passphrase too would be tantamount to archiving in the clear. No privacy. What approaches do you use? What insights can you offer on the issue?

  Read the article

• Creating a seperate static content site for IIS7 and MVC

  - by JK01

  With reference to this serverfault blog post: A Few Speed Improvements where it talks about how static content for stackexchange is served from a separate cookieless domain... How would someone go about doing this on IIS7.5 for a ASP.NET MVC site? The plan so far: Register domain eg static.com, create a new website in IIS Manually copy the js / css / images folders from MVC as is so that they have the same paths on the new server Enable IIS gzip settings (js/css = high compression, images = none) Set caching with far future expiry dates <clientCache cacheControlCustom="public" /> in the web.config Never set any cookies on the static.com site Combine and minimize js / css Auto deploy changes in static content with WebDeploy Is this plan correct? And how can you use WebDeploy to deploy the whole web app to one server and then only the static items to another? I can see there is a similar question, but for apache: Creating a cookie-free domain to serve static content so it doesn't apply

  Read the article

• How to cleanup tmp folder safely on Linux

  - by Syncopated

  I use RAM for my tmpfs /tmp, 2GB, to be exact. Normally, this is enough but sometimes, processes create files in there and fail to cleanup after themselves. This can happen if they crash. I need to delete these orphaned tmp files or else future process will run out of space on /tmp. How can I safely garbage collect /tmp? Some people do it by checking last modification timestamp, but this approach is unsafe because there can be long-running processes that still need those files. A safer approach is to combine the last modification timestamp condition with the condition that no process has a file handle for the file. Is there a program/script/etc that embodies this approach or some other approach that is also safe? Incidentally, does Linux/Unix allow a mode of file opening with creation wherein the created file is deleted when the creating process terminates, even if it's from a crash?

  Read the article

• Network Monitoring Tool Recommendation

  - by user42801

  Hello, My company is looking for a monitoring app/tool that would allow us to capture and graph statistics on network performance. As a starting point, we would like to ping remote host(s) and gateway(s) from several of our servers, grab an average of the ping times from each of our servers to the remote host(s), and then graph it (preferably in a central location). Also, we would like to be able to graph the results for time frames as short as a week to as long as 6 months. It is reasonable to expect that we would ask more of the selected monitoring app/tool as we come up with other key network performance indicators in the future. So an app with great flexibility and features would be ideal. Upon first glance, Cacti looks like it might be a fit. Any other recommendations? Thanks in advance for any input.

  Read the article

• How do I mount a sparse disk image permanently?

  - by Mike

  On Mac OS X 10.6.7, when I mount a sparse disk image (either by double-clicking it or using hdid from the command line), the image: Appears on my desktop Needs to be re-mounted every time I log in I'd like to set up the equivalent of an /etc/fstab which will mount the image when the system boots, and make it permanent - so I don't have to worry if my symbolic links will resolve or not. Is this more trouble than it's worth on a Mac? I noticed that there is no /etc/fstab, and /etc/fstab.hd contains a dire warning: IGNORE THIS FILE. This file does nothing, contains no useful data, and might go away in future releases. Do not depend on this file or its contents. I tried sudo hdid -notremovable <image>, which seemed like half of what I wanted (according to man hdid), but it failed with an error: hdid: attach failed - no mountable file systems.

  Read the article

• How can I remap control+e to escape+control+e in iTerm2?

  - by cwd

  I have set up a few custom keyboard shortcuts in iTerm2 to easily move the cursor around with the arrow keys, but now I'd like to remap control+e to be escape, control+e because bash 4.2 no longer auto-expands variables using the tab key. I know I've done the first part correctly in choosing the keyboard shortcut to remap, but I don't understand how to look up the correct escape sequence (or hex codes) to send in the bottom section: I reference they keyboard codes but that wasn't much help. How can I remap this, and how can I look up the codes in the future? (No luck with Google) Update @db - thanks. To save others trouble I also found a cool util Key Codes.app which can be used to find key codes:

  Read the article

• Why does this Java code not utilize all CPU cores?

  - by ReneS

  The attached simple Java code should load all available cpu core when starting it with the right parameters. So for instance, you start it with java VMTest 8 int 0 and it will start 8 threads that do nothing else than looping and adding 2 to an integer. Something that runs in registers and not even allocates new memory. The problem we are facing now is, that we do not get a 24 core machine loaded (AMD 2 sockets with 12 cores each), when running this simple program (with 24 threads of course). Similar things happen with 2 programs each 12 threads or smaller machines. So our suspicion is that the JVM (Sun JDK 6u20 on Linux x64) does not scale well. Did anyone see similar things or has the ability to run it and report whether or not it runs well on his/her machine (= 8 cores only please)? Ideas? I tried that on Amazon EC2 with 8 cores too, but the virtual machine seems to run different from a real box, so the loading behaves totally strange. package com.test; import java.util.concurrent.ExecutorService; import java.util.concurrent.Executors; import java.util.concurrent.Future; import java.util.concurrent.TimeUnit; public class VMTest { public class IntTask implements Runnable { @Override public void run() { int i = 0; while (true) { i = i + 2; } } } public class StringTask implements Runnable { @Override public void run() { int i = 0; String s; while (true) { i++; s = "s" + Integer.valueOf(i); } } } public class ArrayTask implements Runnable { private final int size; public ArrayTask(int size) { this.size = size; } @Override public void run() { int i = 0; String[] s; while (true) { i++; s = new String[size]; } } } public void doIt(String[] args) throws InterruptedException { final String command = args[1].trim(); ExecutorService executor = Executors.newFixedThreadPool(Integer.valueOf(args[0])); for (int i = 0; i < Integer.valueOf(args[0]); i++) { Runnable runnable = null; if (command.equalsIgnoreCase("int")) { runnable = new IntTask(); } else if (command.equalsIgnoreCase("string")) { runnable = new StringTask(); } Future<?> submit = executor.submit(runnable); } executor.awaitTermination(1, TimeUnit.HOURS); } public static void main(String[] args) throws InterruptedException { if (args.length < 3) { System.err.println("Usage: VMTest threadCount taskDef size"); System.err.println("threadCount: Number 1..n"); System.err.println("taskDef: int string array"); System.err.println("size: size of memory allocation for array, "); System.exit(-1); } new VMTest().doIt(args); } }

  Read the article

• How to obtain printed page count if no web-gui or driver-gui is available to show it

  - by Macgreggor at your service

  I am curious if windows print servers can keep a count of the printed pages sent to it? Can an individual PC (WinXP+)? Is there some secret command you can send it (with telnet, dos, etc)? I searched & couldn't find any questions similar to this here so lets keep this open-ended for future people who are curious. Is this more suited towards server fault? Maybe, but this is more about printers & local PC's have print servers now-a-days. Anyhow in my situation I have the following printers (yes old) I am curious on page-counts: HP Laserjet 1300 (using some kind of PC-card to LPT/Parallel adapter, then a network adapter on top of that [Netgear PS101 print server]) Canon Faxphone L80 Epson LX-300+

  Read the article

• What is the lightest, basic Email Server for Linux?

  - by Xeoncross

  I would like to install an extremely small mail server on my VPS and I am only interested in it sending out mail (activation links) from my web site. I don't need it to support mailboxes or incoming mail (although having that option for the future might be nice). The main requirement is that I don't have to worry about monitoring it as often and protecting against people bouncing messages off my server or wasting resources with incoming mail. I just want to send mail out. So something small that only listens on localhost would be ideal. The other requirement is that it is documented so I can learn how to set it up and manage it.

  Read the article

• SQL Server 2005/2008 Licensing Decision

  - by Hakim

  Hello, I have purchased a dedicated server from a reputable Hosting company. They only have Windows Server 2008 OS installed on it and NO Sql server. Server Configuration is Intel Dual core Processor with 2GB of RAM and 100GB HDD. I wanted to host my web services on that server which will be using the MS SQL Server 2005 at the backend.There are multiple web services and each using a different Database. Microsoft has CAL basis Licensing , Which I understand is based on number of users accessing the database directly ( I may be wrong ) . But my users will be accessing the webservice and no direct connection to the database as such. Yes but the number of users accessing the web server cannot be known and is not under my control. Which Licensing is best suited for this kind of setup ? I don't need analysing and BI services right now ,but i may want to upgrade that in future may be. Any help will be appreciated. Thanks

  Read the article

• How to backup mirror copies of C: drive?

  - by metal gear solid

  I've installed everything on my C: Drive . Whatever i need Windows 7, updated drivers and utilities and software etc i need. I now i want to take a backup mirror of everything in a DVD or i can keep backup in another USB HDD. so in case if i face any windows or hard-drive failure in future then i can restore everything as it is as all are today. I don't want to reinstall everything again Windows, Drivers all utilities and all needed soft-wares. My C: Drive's total capacity is 108 GB but data on c: drive is only 12 GB. What Should i do ? What is the best solution for me? I need free solution.

  Read the article

• Less daunting front end for SQL Server

  - by Martin

  We currently have a few users who have been using Access very succesfully to throw around large amounts of data. We've now got to the point where the data is just too large to be held in Access, as well as wanting to hold it in a single place where multiple users can access it. We have therefore moved the data over to SQL Server. I want to provide a general tool that they can use to view the data on the server and do some simple things like run queries and filters and export the data for offline manipulation. I don't want the support headaches that might come with rolling out SQL Management Studio, and neither do I want to have to create an Access database with links for each current database or ones that are created in the future. Can anyone recommend a simple tool that will connect to a server, list all the databases and allow a user to drill into a table and look at the data. Many thanks.

  Read the article

• Which TCP ports to use?

  - by rowatt

  Is there a TCP port range which I can be sure will not be used by anything else for traffic between two machines? If I am reading RFC6335 correctly, I can be sure that no other applications will use specific ports in the Dynamic/Private/Ephemeral range of 49152-65535. However, if I understand correctly, it also states (section 8.1.2) that an application shouldn't assume that any given port in that range is available at any given time, which would mean I can't be 100% sure that it will be unused all the time. Specifically, I want to assign specific SSH traffic to a different port for the security benefit and so I can classify it differently for QoS purposes, and not have to worry about changing the port in the future.

  Read the article

• Ubuntu Linux -- create custom burnable/bootable DVD image?

  - by ashgromnies

  I recently developed some kiosk software that runs on Ubuntu Linux, and my client needs me to set up ten more computers with the complete software package(and that number will only grow in the future). So I'm looking for a way to make this less of a pain in the neck and prevent me from shooting myself in the foot -- I had to disable some things on the installations of the operating systems like screensavers, automatic updates, etc. that would pop up and disrupt the kiosk operation. I don't feel comfortable doing that by hand across 10 computers, it seems stupid. Does anybody have recommendations for software that would let me burn an installable DVD with a complete image of the hard drive from one of the devices? I've looked at Clonezilla, G4L, and PartImage and I'm still not quite sure if any of them offer what I need. I know PartImage for sure won't work, because it doesn't support Ext4.

  Read the article

• List of recent motherboards with BIOS / without UEFI [on hold]

  - by jmn

  I am building a new desktop PC and I want to have full disk encryption on it. TrueCrypt doesn't support UEFI as of now. Are there still recent motherboards out there without UEFI ? I didn't find any list and I am afraid that I will have to study each potential candidate's technical sheet before purchase. I want to buy 2 or 3 of the same model to be future proof. Newegg links will not help, I don't live in the USA ... this means that this post is a legitimate target for PRISM ;-) Thanks for your help.

  Read the article

• Resetting default Input Method in Mac OS 10.6

  - by Tim Visher

  I'm a Dvorak guy. I recently installed a new machine at the inlaws who are not Dvorak people. I stupidly selected Dvorak as my Input Method of choice while installing OS X. Now, all of the users I created default to Dvorak and need to go through the manual process of removing Dvorak as their Input Method of choice and instead choosing U.S. I have no idea how far reaching the implications might be. Could be that any time another user is added they will default to Dvorak. Right now, I'd like to set the default back to U.S. How can I do that? Behaviors I'm looking for include that when the Input Menu is not shown at the Login Screen, U.S. is the keyboard layout. Any future users created should default to U.S. with no Input Menu in the menu bar. Any users created already should have their default layout be U.S. Thanks in advance!

  Read the article

• Specific cron at time point [closed]

  - by ARTI

  I have a very specific task, but can't handle it. I am not a programmer and totally n00b on bash scritps. So the question is, how to create a cron job like this: Script A.sh could be called at any time by hands, and it should create cron job to run script B.sh once at the nearest time point. For example I will have 4 time points: 10.00pm, 10.15pm, 10.30pm, 10.45pm. So if trigger a script A.sh at 10.07pm it should creat cron job to run ONCE script B.sh at 10.15h, because 10.15h is the nearest time point in future. Is it possible? How can I write such script A.sh? I use Centos 6 It is very important and urgent for me. Thank you very much.

  Read the article

• Do TCP/UDP connections add to the Windows incoming connection limit?

  - by user47899

  Hi all, I've tried to figure out what Microsoft means by "Windows sockets" and it all seems very vague. Basically we have customers that sometimes try to set up workgroups with close to 10 Windows XP computers with drive and printer shares and we're worried that some of the non-Windows Ethernet devices on the network will cause issues with the inbound connection limit outlined here where only 10 inbound connections can be active at one time. For example, there is an Ethernet Caller ID device that broadcasts UDP packets to all computers, and a kitchen display system that likewise broadcasts UDP. They may also have incoming TCP packets for our custom online ordering module. Do these TCP/UDP connections count toward the inbound connection limit? I'm aware that Windows 7 has increased the limit to 20 but we might have future customers that will push that limit. Thanks in advance

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >