Search Results

Search found 22945 results on 918 pages for 'going green'.

Page 92/918 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Drawing large 2D sidescroller level terrain

    - by Yar
    I'm a relatively good programmer but now that it comes to add some basic levels to my 2D game I'm kinda stuck. What I want to do: An acceptable, large (8000 * 1000 pixels) "green hills" test level for my game. What is the best way for me to do this? It doesn't have to look great, it just shouldn't look like it was made in MS paint with the line and paint bucket tool. Basically it should just mud with grass on top of it, shaped in some form of hills. But how should I draw it, I can't just take out the pencil tool and start drawing it pixel per pixel, can I?

    Read the article

  • Is it possible to power up ports on a USB hub from Ubuntu?

    - by James Henstridge
    I have a D-Link DUB-H7 powered USB 2.0 hub connected to my computer. Occasionally when I reboot the system, I've noticed that some of the ports on the hub get powered down: the green light next to the port is turned off, and the device attached to that port is not visible to lsusb or similar commands. Devices attached to the other ports on the hub function as normal. I am able to restore the ports by disconnecting power to the hub temporarily (from the computer, AC adapter and any devices that might provide any power such as my phone), but this is a bit of a hassle. It seems like something that might be related to power management, so is there some way you can tell the USB hub to power up through software?

    Read the article

  • Reliable procedure/tool for removing print drivers in Windows 7 (domain environment)

    - by ultrasawblade
    One of the troubleshooting steps in resolving printer-related issues with any version of Windows is to remove installed print drivers and then reinstall the drivers. This is a domain environment and drivers are pulled from a print server. I've had occasion to need to do this on a user's system running Windows 7 Enterprise 64-bit. These procedures don't work: Removing the printer from Devices and Printers (doesn't remove driver obviously) Doing the above, going into Server Properties, and attempting to remove the driver (fails with a "driver in use" error) Opening an empty mmc, adding the Print Management snap-in, and attempting to do the above. Doing sc stop spooler and sc start spooler before doing both of the above Now I know it's possible to remove drivers with the spooler service stopped and then going into the spool directory, as well as deleting registry entries. I'm asking if a tool exists to do this where I can just select the driver in question and it be removed.

    Read the article

  • Becoming a Certified Information Professional

    - by Lance Shaw
    Yesterday, we participated with AIIM in a webinar about the Certified Information Professional (CIP) program that they are now offering.  The interest level is very high in the program, as evidenced by the high turnout at the event. You might be asking yourself, what does the Oracle WebCenter team care about an AIIM certification program? Well, we sponsored this program because we consistently find that the more educated our customers and prospects are, the more value they are going to get out of the technology we provide.  As an ECM vendor, we provide plenty of WebCenter product training and certifications to help you make the most of WebCenter technology. While these are essential and valuable, technologists that also have an operational command of the business and the various impacts that the flow of information can have are even more valuable to an organization. Thinking about the management of content and information and its effect on business process can have wide-ranging benefits, not only to your company but to your personal bottom line.  And let's be honest, a customer who is looking holistically at how content is managed is going to see more opportunities to leverage that content and in many cases, this will motivate the purchase of additional product licenses.   Now if you are regretting the fact that you missed the webinar yesterday, never fear!  It is now available for playback and you can view it at your convenience by visiting the AIIM website. We hope you find it informative and that you can personally profit from being able to showcase your certification as an Information Professional. Additionally, we hope it will help you identify additional opportunities to leverage Oracle WebCenter in order to further reduce your operational costs and drive your business forward.

    Read the article

  • HTML5 video capture and streaming?

    - by Shyatic
    I'm working on kind of an educational site, where there are teachers and students around the world (potentially). Since it's a non-profit site, and I don't have the need for it to be done tomorrow (kind of a side project of something bigger), I wanted to know the best way to figure out how to do this. I'm not a programmer by trade, I've been on the systems side of things for years, but I understand most technology and the question here is more how to gauge what to do so I can get the right resources in place. That said... here's what I am looking at. I figure the future is HTML5, and that's probably where I'd rather spend my efforts given that it will be cross platform and without the need for plugins. It will work on mobile as well. Question is, how well does HTML5 handle input media, say desktop capture and camera, or on mobile perhaps, where I'd want to use the user's phone camera, etc. Second question is dynamic streaming... I've read about MPEG DASH, then there are technologies like Smooth Streaming (which I think given the way Silverlight is going is going to be gone or useless), then also Apple and Flash, but if I'm doing HTML5 it doesn't benefit me. Any ideas here would be really helpful, and the more detail the better! :) That's about it... there are free chat services out there like using the MSN Web Chat controls (how good they are, I don't know, but worldwide most people have a Hotmail/MSN account) so I can use that for chat. I don't know its limitations of course, but that's something if people know or have suggestions, then I'm all ears. Thanks for the help, I greatly appreciate it!

    Read the article

  • Server 2012 R2 DNS Conditional forwarding not working reliably, possible caching issue?

    - by Matt
    I have a bit of a home lab setup with a domain controller that is acting as the DNS server for my network. For everything, it's working fine and forwards external DNS requests to my ISP. The household recently wanted to get Netflix going and it seemed a DNS option was better than a VPN to get around the region locking, so I signed up for unblock-us.com Since I have a Windows DNS server I thought I'd be clever and make use of conditional forwarders and added the Netflix domain to the list. Initially this worked well and all devices on the network could now access Netflix, however after about an hour going to the Netflix site would result in a page cannot be found. Doing an nslookup of Netflix.com from my PC resulted in it not returning any IP addresses. As a test, I deleted the Netflix domain from the DNS servers cache and things started working again - devices could get to the site again however the same thing happens again after around half an hour to an hour. Have I missed something here that's causing it to stop working?

    Read the article

  • lots of dns requests from China, should I worry?

    - by nn4l
    I have turned on dns query logs, and when running "tail -f /var/log/syslog" I see that I get hundreds of identical requests from a single ip address: Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#10856: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#44334: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#15268: query: mydomain.de IN ANY + Apr 7 12:36:13 server17 named[26294]: client 121.12.173.191#59597: query: mydomain.de IN ANY + The frequency is about 5 - 10 requests per second, going on for about a minute. After that the same effect repeats from a different IP address. I have now logged about 10000 requests from about 25 ip addresses within just a couple of hours, all of them come from China according to "whois [ipaddr]". What is going on here? Is my name server under attack? Can I do something about this?

    Read the article

  • What technology or skillset should I learn today in order to be able to charge $250+ / hr in 2-3 years? [closed]

    - by Ryan Waggoner
    I've been doing PHP freelance development for the last 4-5 years and I'm starting to max out my hourly rate. So in 2010 I decided to transition to a new language. I played with Python and Ruby, but ended up settling on iOS, for three reasons: I'm enjoying the challenge of working on a completely different type of development, instead of another flavor of web development The demand seems higher right now than for Ruby or Python I see iOS developers charging $150 - 250 / hr Whether these reasons are right or wrong, I've been learning iOS for the last year and I'm starting to get more work in that field. I feel confident that in six months (barring any major shifts in the ecosystem), I can be billing iOS work at $150 / hr or more. However, I'm feeling that I should have done this earlier, that I've missed the boat, and that iOS development is going to dry up or get much more commoditized. Whether this is true or not isn't really my question (though feel free to comment). What I want to know is: what should I start learning right now so that I can be ahead of the curve in a couple years when the demand is far outstripping supply? What technologies or skillsets are going to be so heavily in demand in 2-3 years that you'll be able to charge $250 / hr or more and stay busy? These don't have to be new technologies either...the answer could be iOS or COBOL or whatever.

    Read the article

  • Deleted one membership table. Possible to import without breaking relationship?

    - by superexsl
    Hey, I hope this isn't going to be tricky/time consuming, so fingers crossed. I'm working with the ASP.NET membership table. However, I've got quite a few other tables that I've built, and most of them have a relationship with the dbo.aspnet_Membership table. I've accidentally deleted the dbo.aspnet_Membership table and can't get it back. There was no major data on it, (as it's on my local machine), but I would really like to copy and paste that one table from another database I have, mainly for the sake of not breaking the schema. Is this possible? I'm worried if I run the Aspnet_regsql.exe tool, it's going to break the schema and remove all data from the tables as well the relationships (which would take a while to re-establish). Is there any way I can import just the dbo.aspnet_Membership table into my current database? Thanks for the any advice!

    Read the article

  • A New Native Silverlight 4 Rich Text Editor Coming Up

    The eagerly awaited release of Silverlight 4.0 is now a fact and we have great news to share with you. Here at Telerik we are going to have a new addition to our Silverlight suite a brand new native Silverlight 4.0 rich text box. RadRichTextBox offers MS Word-like text editing and formatting capabilities which come with unmatched performance, paged and flow layout. The new control utilizes UI Virtualization and Recycling, easy to use API for accessing/modifying document and layout structure, and more. A CTP of RadRichTextBox is going to be released with the upcoming RadControls for Silverlight 2010.Q1 SP1. The official version is expected to be part of the Q2 2010 release. To illustrate better some of the new features lets see a short example of the document model in pure XAML: As we said above, the structure of the document is like the documents in WPF. In the ...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Why The Athene Group Chose Fusion CRM

    - by Tony Berk
    A guest post by Vikas Bhambri, Managing Partner, The Athene Group This year, The Athene Group (www.theathenegroup.com) celebrated our tenth anniversary. The company has accomplished a lot in ten years overcoming a number of hurdles and challenges to have grown organically to a 150+ person global company with offices in the US, UK, and India and customers in the US, Canada, and Europe. Now more than ever with the current global landscape from an economic and competitive standpoint it was vital that we make some changes to remain successful for the next ten years. There were two key initiatives that we discussed internally that would enable us to successfully accomplish this – collaboration and the concept of “insight to action”. With our existing Oracle CRM On Demand platform we had components of this but not the full depth and breadth that we were looking for. When we started to discuss Fusion CRM we immediately saw several next generation tools that would embrace these two objectives. For a consulting and development organization the collaboration required between business development and consulting delivery is as important as the collaboration required during the projects between the project delivery and account management teams. The Activity Streams functionality in Fusion CRM immediately addressed the communication of key discussion topics and exchanges around our clients. Of course when we saw the Oracle Social Network (which is part of our Fusion CRM roadmap) we were blown away. The combination OSN and our CRM is going to make us more effective as we discuss and work cohesively on client engagements – ensuring mutual success for both Athene and our clients. When we looked at “insight to action” we saw that we had a great platform when folks were at their desks, unfortunately a lot of our business development and consulting folks are on the road. The Fusion Mobile Sales and Fusion Outlook Desktop provide information to our teams when they are on the go. So that they can provide real-time information and react to real-time information provided by their peers. We are in the early stages of our transformative experience with Fusion CRM but we believe the platform along with our people and processes are going to help us achieve our goals in the future.

    Read the article

  • Which skills would you expect and appreciate in a Junior Software Engineer??

    - by Bartzilla
    Hi StackOverflow community! I would like to receive some advices from all of you. I know in here there are superb programmers, with outstanding careers, people working for amazing and important companies in the industry so I am very excited to read the replies I could get. I recently finished my Msc.in Software Engineering, and I am about to start my professional career in two weeks. My role will be as a Junior Developer for a company which develops e-commerce software using Java & related technologies (among them Spring, Hibernate). To be honest I am really excited about what is coming specially because I really want to develop my career as a Java developer plus I am also very interested in gaining experience in the e-commerce field. Additionally, this is going to be my first work experience as a professional developer so I really want to do my best from the very beginning. I know many of you probably have manager roles or are team leaders, so basically I would like to know which skills and abilities would you judge and appreciate in a new professional (Junior Developer) that could be part of your team(Soft and Technical Skills) and in which skills I should focus on to achieve a successful career as a Software Engineer. Of course there are many things everybody should expect like good technical knowledge of the technologies you are going to use and so on.. But, I would like to hear your opinions, I will really appreciate advises from experienced developers and hear different perspectives other than mines.. Thanks in advance!

    Read the article

  • How do I force apt-get to install a package that will not install due to a bug introduced by Ubuntu 11.10?

    - by Hemm
    Ubuntu 11.10 separated out python-profiler from the Python standard library due to licensing philosophies. (According to what I could Google, correct me if I'm wrong.) This is an active bug since October for 11.10. I have Python 2.7.2 installed, so the dependency errors are wrong. 'apt-get check' does not resolve the problem. What is the best way to resolve to this? Thank you. sudo apt-get install python-profiler Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: python-profiler : Depends: python (>= 2.5) but it is not going to be installed Depends: python (< 2.8) but it is not going to be installed E: Unable to correct problems, you have held broken packages.

    Read the article

  • Designing generic render/graphics component in C++?

    - by s73v3r
    I'm trying to learn more about Component Entity systems. So I decided to write a Tetris clone. I'm using the "style" of component-entity system where the Entity is just a bag of Components, the Components are just data, a Node is a set of Components needed to accomplish something, and a System is a set of methods that operates on a Node. All of my components inherit from a basic IComponent interface. I'm trying to figure out how to design the Render/Graphics/Drawable Components. Originally, I was going to use SFML, and everything was going to be good. However, as this is an experimental system, I got the idea of being able to change out the render library at will. I thought that since the Rendering would be fairly componentized, this should be doable. However, I'm having problems figuring out how I would design a common Interface for the different types of Render Components. Should I be using C++ Template types? It seems that having the RenderComponent somehow return it's own mesh/sprite/whatever to the RenderSystem would be the simplest, but would be difficult to generalize. However, letting the RenderComponent just hold on to data about what it would render would make it hard to re-use this component for different renderable objects (background, falling piece, field of already fallen blocks, etc). I realize this is fairly over-engineered for a regular Tetris clone, but I'm trying to learn about component entity systems and making interchangeable components. It's just that rendering seems to be the hardest to split out for me.

    Read the article

  • Installation problems with Gimp 2.8 on Kubuntu 12

    - by Martyn
    I've just upgraded to Kubuntu 12.04 and having problems installing Gimp 2.8, I was wondering if anyone can help me? I've followed these instructions: sudo add-apt-repository ppa:otto-kesselgulasch/gimp sudo apt-get update sudo apt-get install gimp but get this error: The following packages have unmet dependencies. gimp : Depends: libwebkitgtk-1.0-0 (>= 1.3.10) but it is not going to be installed E: Unable to correct problems, you have held broken packages. I've tried running these and trying again with the same problems: sudo apt-get clean sudo apt-get autoremove sudo apt-get update sudo apt-get upgrade sudo apt-get -f install also running sudo apt-get install libwebkitgtk-1.0-0 gives me this error The following packages have unmet dependencies. libwebkitgtk-1.0-0 : Depends: libgail18 (>= 1.18.0) but it is not going to be installed E: Unable to correct problems, you have held broken packages. and then running sudo apt-get install libgail18 gives me this error The following packages have unmet dependencies. libgail18 : Depends: libgtk2.0-0 (= 2.24.10-0ubuntu6) but 2.24.10-1oneiric6~ppa is to be installed E: Unable to correct problems, you have held broken packages. The bit that caught my attention was but 2.24.10-1oneiric6~ppa is to be installed - but I don't know what to do with this. I've rebooted and the error messages are the same. Can anyone help? ** EDIT ** I've found someone with the same problem, unfortunately the link is in German so I can't completely understand what the solution (last post) is - here's the google translated link : http://translate.google.com/translate?sl=auto&tl=en&js=n&prev=_t&hl=en&ie=UTF-8&layout=2&eotf=1&u=http%3A%2F%2Fwebcache.googleusercontent.com%2Fsearch%3Fq%3Dcache%3A1U2Uat6XqUsJ%3Aforum.ubuntuusers.de%2Ftopic%2Fprobleme-nach-update-fehlerhafte-pakete-aus-on%2F%2B%26cd%3D3%26hl%3Den%26ct%3Dclnk%26gl%3Duk&act=url

    Read the article

  • How to get a Toshiba L505 to boot USB or CD

    - by ShroudedCloud
    OK, have a Toshiba L505 (not sure of the extended model number) that got a virus on Windows and will no longer will boot into that, so I'm trying to revive it with Ubuntu. Problem is, when I tell it to boot into a USB image of 12.04 32- or 64-bit, 13.04 64-bit, or elementary Luna 32-bit, it gives me some screen with a copyright from 2000 for Intel, invariably spits out a "media not recognized" type of error and then says PXE-ROM exiting. Well, that's annoying. So I went in with a CD (12.04 x86_64 having tried 32-bit in the past as well). Boot menu, select, starts running. Seeing the loading screen for Ubuntu, going well... until it's not. Again, invariably, it fails. The CD drive will cease spinning at around the same time each time and then the laptop will stop doing everything altogether (at least, everything spins down and it goes quiet). As far as I can tell, it's not to do with what function is being loaded from the CD at the time (because that bit is variable). I'd love to be able to boot from USB (since it will be all but required going forward), but getting the CD to work would be wondrous too. Anyone have any ideas of where I can go from here to try to fix this? My friends and I have turned up nothing.

    Read the article

  • Secure Apache Virtual Hosts?

    - by Dr Hydralisk
    I am going to host a few small sites on VPS, and each of them are going to run my own custom PHP scripts. I am fairly certain that they are secure (did everything in the book, plus some of which is not in the book) to make sure they can't be exploited. But just to be safe I want to know how I could secure each of the virtual hosts so that they can't escape from there virtual host (if a hacker uploaded a shell they could not go above the www folder a legitimate user can't do in ftp no matter how many times they click ..) folder on Debian and Apache.

    Read the article

  • Can I uninstall Qmail when I switch to Gmail Apps

    - by Saif Bechan
    I am not going to run a mail server anymore on my system. I am going to switch to Gmail. Can I then just uninstall Qmail or my previous mail server programm. I want to be able to send email from PHP. And I also want to get the email that Logwatch sends me from within the system. Basically, to have your server send email do you need an email server? Or will Gmail cover all of this.

    Read the article

  • At what point would you drop some of your principles of software development for the sake of more money?

    - by MeshMan
    I'd like to throw this question out there to interestingly see where the medium is. I'm going to admit that in my last 12 months, I picked up TDD and a lot of the Agile values in software development. I was so overwhelmed with how much better my development of software became that I would never drop them out of principle. Until...I was offered a contracting role that doubled my take home pay for the year. The company I joined didn't follow any specific methodology, the team hadn't heard of anything like code smells, SOLID, etc., and I certainly wasn't going to get away with spending time doing TDD if the team had never even seen unit testing in practice. Am I a sell out? No, not completely... Code will always been written "cleanly" (as per Uncle Bob's teachings) and the principles of SOLID will always be applied to the code that I write as they are needed. Testing was dropped for me though, the company couldn't afford to have such a unknown handed to the team who quite frankly, even I did create test frameworks, they would never use/maintain the test framework correctly. Using that as an example, what point would you say a developer should never drop his craftsmanship principles for the sake of money/other benefits to them personally? I understand that this can be a very personal opinion on how concerned one is to their own needs, business needs, and the sake of craftsmanship etc. But one can consider that for example testing can be dropped if the company decided they would rather have a test team, than rather understand unit testing in programming, would that be something you could forgive yourself for like I did? So given that there is something you would drop, there usually should be an equal cost in the business that makes up for what you drop - hopefully, unless of course you are pretty much out for lining your own pockets and not community/social collaborating ;). Double your money, go back to RAD? Or walk on, and look for someone doing Agile, and never look back...

    Read the article

  • As a developer, how do I learn sales? [closed]

    - by Dan Abramov
    I quit the company I was working for to pursuit an opportunity as a startup, and I believe in our product. I'm sure it's going to be great if we attract some customers first to keep going. (I don't want funding.) Our product is targeted at private schools and courses, and helps organize the mess other LMSs introduce. The problem is, our team is basically just me and I have very little idea about sales and marketing. I can do reasonably good copywriting but I'm sure I can do better—and being nervous or too techy in a real world conversation with the client doesn't help. I want to get better, in fact, a lot better at negotiating with clients and pitching my product. I did look for some “sales articles” on the web, and a lot of what I found is plain bullshit on SEO-engineered websites promoting books or $5000 courses. What I need instead is a developer's perspective on how to sale a product you think is great. What are typical programmer's mistakes and misconceptions about sales, and how to avoid them? How do you evolve into a reasonably great salesman? I can't believe it's in the mindset and unlearnable. Your own experience, combined with great articles available on the web is most welcome. To Future Readers The question got closed because it is not a good fit for this site. I found some helpful tips in a similar question asked on a sister StackExchange site about startups: I'm a terrible salesperson. What can I do about it?

    Read the article

  • SSIS Tips & Tricks (Presentation)

    This has been a rather well used presentation title but it does allow a certain degree of flexibility, and we covered a good range of topics in my session at the UK SQL Server User Group in Cambridge last night. Thanks to all who attended. Here is the rather limited slide deck and the all important demo packages for download as promised. For reference, high level topics covered were BIDS Helper Inserts and Updates Transactions Script Debugging Data Flow Checkpoints I’ll update the post with a link to the Live Meeting recording when I get it. Presentation & Demo Packages (194KB) SSIS Tips & Tricks - Darren Green.zip

    Read the article

  • Looking for a small, light scene graph style abstraction lib for shader based OpenGL

    - by Pris
    I'm looking for a 'lean and mean' c/c++ scene graph library for OpenGL that doesn't use any deprecated functionality. It should be cross platform (strictly speaking I just dev on Linux so no love lost if it doesn't work on Windows), and it should be possible to deploy to mobile targets (ie OpenGLES2, and no crazy mandatory dependencies that wouldn't port well to modern mobile frameworks like iOS, Android, etc), with a license that's compatible with closed source software (LGPL or more liberal). Specific nice-to-haves would be: Cameras and Viewers (trackball, fly-by, etc) Object transform hierarchies (if B is a child of A, and you move A, B has the same transform applied to it) Simple animation Scene optimization (frustum culling, use VBOs, minimize state changes, etc) Text I've played around with OpenSceneGraph a lot and it's pretty amazing for fixed function pipeline stuff, but I've had a few of problems using it with the programmable pipeline and after going through their mailing list, it seems several people have had similar issues (going back years). Kitware's VES looks neat (http://www.vtk.org/Wiki/VES), but VES + VTK is pretty heavy. VTK is also typically for analyzing scientific data and I've read that it's not that appropriate for a general use case (not that great at rendering a lot of objects on scene,etc) I'm currently looking at VisualizationLibrary (http://www.visualizationlibrary.org/documentation/pag_gallery.html) which looks like it offers some of the functionality I'd like, but it doesn't explicitly support mobile targets. Other solutions like Ogre, Horde3D, Irrlicht, etc tend to be full on game engines and that's not really what I'm looking for. I'd like some suggestions for other libraries that I may have missed... please note I'm not willing to roll my own solution from scratch.

    Read the article

  • Symbol of VPNanytime is not shown anymore after upgrading from Ubuntu 11.04 to 11.10

    - by Aufwind
    Usually when I start VPN anytime (by calling a certain url in firefox) in Ubuntu 11.10 I saw a little "green symbol with a yellow lock in front of it" for the VPN anytime client near the clock. If I wanted to quit the VPN connection I just clicked on this symbol and hit logout/quit. Today I upgraded to Ubuntu 11.10 and the VPN connection works here fine too. But the symbol near the clock is not shown anymore. Is this a bug or do I have to set this up manually? And is there a way to quit the client perhaps by terminal? Currently I just do a restart, when I want the vpn connection terminated and that's kind uncomfortable. :-) Thanks for any suggestions!

    Read the article

  • How do I stop sound coming from my speakers with a faulty headphone socket?

    - by Andy
    On my laptop, I have a faulty headphone socket, so when I insert headphones into it, the speakers do not mute. I can confirm that this problem is caused by faulty hardware and not software as when I twist the headphone jack, the speakers come on and off according to the movements. On previous versions of Ubuntu, I worked around this problem by going into alsamixer and disabling "Auto-Mute Mode", and then going into the sound settings and choosing "Analog Headphones". However, on 12.04, no such option exists, rendering my headphones unusable with no way to work around the problem. I momentarily thought I had this problem fixed when I installed PulseAudio Volume Control from the Software Centre. I selected the Output Devices tab, and under "Built-in Audio Analogue Stereo" I selected "Headphones" for the port. However, this almost randomly seems to change back to "Speakers", despite me setting "Auto-Mute Mode" as disabled. Basically, I would like a way to permanently mute the speakers so only the headphones will play sound, without it losing my settings. It is ridiculous that such a simple setting has been taken away to "simplify" the user interface.

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >