Search Results

Search found 11077 results on 444 pages for 'ip'.

Page 92/444 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Why does eth0 show an IP if I'm booting into runlevel 1?

    - by banjer
    I'm having some issues with networking on a new Linux server I'm building. The OS is SLES 11. When booting into runlevel 1, I see that eth0 is showing an IP. Physically, there is a network cable plugged into the card associated with eth1, and then there is a network cable plugged into a QLogic iSCSI card (eth4, not shown). I've been troubleshooting this for awhile, and it seems like eth0 is somehow getting assigned an IP, even though it isn't configured in Linux or even plugged into the network for that matter. Thoughts? ifconfig -a Here is the ifconfig output (Sorry, I need more rep before I can post images on SF...)

    Read the article

  • IP KVM switch, or serial console box for remote admin?

    - by grahzny
    We have a small server farm (11 now, may add more in the future) of HP Proliant DL160 G6s. They all run either Linux (server only, no X11) or VMware ESX. We had intended to get models with iLO, in case BIOS-level remote admin became an issue, but that didn't happen. I had an IP KVM switch recommended to me (along with some sort of Remote Reboot hardware.) I've since realized that none of our machines need GUI administration, so perhaps a serial console switch would be a cheaper and more appropriate option. Something like this: http://www.kvm-switches-online.com/serimux-cs-32.html Do you folks have an opinions on which way is a better choice? Should we go for the ease of setup (plug and go, instead of turning on the feature in the BIOS and making sure the serial settings are correct) and the flexibility of an IP KVM switch even with the extra cost? Or is a serial console switch just fine?

    Read the article

  • How does one guarantee a remote client the same local IP address every time when connecting to a VPN?

    - by Joe Carroll
    I need to configure a VPN for secure remote access to a PACS serving DICOM radiological images. The DICOM standard requires that any clients accessing the PACS must be using a fixed IP address that is pre-registered in PACS. I haven't implemented this solution before and would appreciate any guidance. I believe it should be possible to use RADIUS on the server to authenticate users connecting to the VPN and with it assign each user their own specific local subnet IP address, which would be registered with the PACS. The server runs Windows Server 2003 R2 Enterprise Edition SP2 and the VPN device is a FortiGate 60C. The What would be the best and/or simplest way to set this up?

    Read the article

  • How can I force Parallels' networking to obtain an IP through a wireless router?

    - by RLH
    Here is my setup. I have a Macbook, Thunderbolt display and an Ethernet connection plugged into the Thunderbolt display. During the day, most of my network use can (and should) operate across the ethernet associated with my display. However, I also need to be able to connect up to a wireless router. This hasn't been a problem on the Mac OS X side, but the program that I need to run on the router has to obtain an IP address from the wireless access point. Considering my current setup, how can I leave it so that I can access the internet in OS X, yet have my Window 7 instance running in Parallels, get it's assigned IP address from a wireless router that my Mac is also connected to? I've fiddled around with the Parallel's network settings for an hour, and I can't get Parallel's to see the router, even though my Mac is certainly connected to it.

    Read the article

  • Any way to know if two ip address points to the same machine?

    - by Vivek V K
    Is there anyway to find if two different IP address in two different network actually points to the same physical device? I need it in Linux. Edit - I have the same server(a raspberry pi) connected via 2 intranets to my client. I don't know the IP address of the server as it is DHCP. The crude way to do is to reach the raspberry pi from one intranet and check with ifconfig to find the ipadress of the machine in the other Intranet. I want to know if there is any other way I can do it? I know the mac address of the machine.But I don't know how do I find the Ipadress based on the mac address.

    Read the article

  • How Can I assign an IP address to my virtual Windows Server, so that I can start using it almost as a VPS?

    - by Nelson Symonds
    We are a small office set up with two PC's out of which one of my PCs runs 24hrs. Its almost equivalent to a small server, but right now we're in need of a server which is why I am planning to keep my machine as well as a server into a single PC. I've used VMware Workstation to create a powerful Windows Server 2008 within my PC and I want to attach it to my Network Switch through the same PC where I am hosting it. I want to use it almost like a physical server with an IP address and everything so that I can connect from one Pc to the Server directly or my applications can connect to Server straight with the IP address. How should I do this? Step by step instructions would be appreciated. Thanks in Advance, Best regards Nelson

    Read the article

  • Windows 2008 R2 IPsec encryption in tunnel mode, hosts in same subnet

    - by fission
    In Windows there appear to be two ways to set up IPsec: The IP Security Policy Management MMC snap-in (part of secpol.msc, introduced in Windows 2000). The Windows Firewall with Advanced Security MMC snap-in (wf.msc, introduced in Windows 2008/Vista). My question concerns #2 – I already figured out what I need to know for #1. (But I want to use the ‘new’ snap-in for its improved encryption capabilities.) I have two Windows Server 2008 R2 computers in the same domain (domain members), on the same subnet: server2 172.16.11.20 server3 172.16.11.30 My goal is to encrypt all communication between these two machines using IPsec in tunnel mode, so that the protocol stack is: IP ESP IP …etc. First, on each computer, I created a Connection Security Rule: Endpoint 1: (local IP address), eg 172.16.11.20 for server2 Endpoint 2: (remote IP address), eg 172.16.11.30 Protocol: Any Authentication: Require inbound and outbound, Computer (Kerberos V5) IPsec tunnel: Exempt IPsec protected connections Local tunnel endpoint: Any Remote tunnel endpoint: (remote IP address), eg 172.16.11.30 At this point, I can ping each machine, and Wireshark shows me the protocol stack; however, nothing is encrypted (which is expected at this point). I know that it's unencrypted because Wireshark can decode it (using the setting Attempt to detect/decode NULL encrypted ESP payloads) and the Monitor Security Associations Quick Mode display shows ESP Encryption: None. Then on each server, I created Inbound and Outbound Rules: Protocol: Any Local IP addresses: (local IP address), eg 172.16.11.20 Remote IP addresses: (remote IP address), eg 172.16.11.30 Action: Allow the connection if it is secure Require the connections to be encrypted The problem: Though I create the Inbound and Outbound Rules on each server to enable encryption, the data is still going over the wire (wrapped in ESP) with NULL encryption. (You can see this in Wireshark.) When the arrives at the receiving end, it's rejected (presumably because it's unencrypted). [And, disabling the Inbound rule on the receiving end causes it to lock up and/or bluescreen – fun!] The Windows Firewall log says, eg: 2014-05-30 22:26:28 DROP ICMP 172.16.11.20 172.16.11.30 - - 60 - - - - 8 0 - RECEIVE I've tried varying a few things: In the Rules, setting the local IP address to Any Toggling the Exempt IPsec protected connections setting Disabling rules (eg disabling one or both sets of Inbound or Outbound rules) Changing the protocol (eg to just TCP) But realistically there aren't that many knobs to turn. Does anyone have any ideas? Has anyone tried to set up tunnel mode between two hosts using Windows Firewall? I've successfully got it set up in transport mode (ie no tunnel) using exactly the same set of rules, so I'm a bit surprised that it didn't Just Work™ with the tunnel added.

    Read the article

  • Why does a redirect from a local IP address assume localhost?

    - by Jeremy
    I am developing a web application on my desktop and it is running on port 80. I am able to access the application from my laptop connected to the LAN by entering my desktop's LAN IP address 192.168.1.8. Now, my application sends a redirect after login, but my laptop assumes the final address is localhost/login. If I manually type in the IP address and URI for any page, it shows that I am logged in, so it works as expected. So, why does the redirect assume localhost? Both of my machines are linux-based. The laptop being Chrome OS. I am running nginx which proxies non-static file requests to jetty on port 8080.

    Read the article

  • RRAS Svr on win 2003 provides same gateway as the ip to vpn clients and subnet as 255.255.255.255

    - by Amit Phatarphekar
    Hello - I've setup a RRAS Svr on win 2003 svr, to provide VPN access to clients. I've followed all directions in microsoft documentation to finish the setup. A VPN client successfully connects when I connect to the VPN svr. But when I look at the ipconfig info, I see that the IP and Gateway are same and subnet is 255.255.255.255. Example IP - 10.0.0.121 Gateway - 10.0.0.121 subnet - 255.255.255.255 DNS - 10.0.0.12 What am I doing wrong?

    Read the article

  • IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

    - by jayson
    Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

    Read the article

  • How to make OS X send LOCAL IP address in www request headers?

    - by Louis W
    I need to be able to send the local IP address of a computer along with the headers when making requests to a website. Similar to the way you can get the _SERVER["REMOTE_ADDR"] in php, but the local ip (e.g. 192.168.100.1) This will be an intranet so the environment can be controlled. Anything can be installed on the computer, etc. This will be on a Mac OS X computer. Hoping for both Safari AND Firefox. But would be open to using one one. Does anyone know if this is possible? Thanks so much.

    Read the article

  • Windows Vista: TCP/IP stack is smashed, how to reinstall the LAN-Devices?

    - by Ice
    the TCP/IP stack is smashed, thats why no LAN-Connections are running. I want to download the LAN drivers from another computer and uninstall and reinstall the LAN devices on this system. Hopefully that should recreate the stack. But what to download? What uninstall? How to install? Windows Vista is protected against such changes, so how to achieve that job? please help. Update per 2011-03-11: I found all the tipps and hints about "TCP/IP Repair, LSP Fix, and WinSock Fix" according to windows vista but nothing helped to bring back network access. What can i do as next step or which opportunities are left?

    Read the article

  • how limit the number of open TCP streams from same IP to a local port?

    - by JMW
    Hi, i would like to limit the number of concurrent open TCP streams from the the same IP to the server's (local) port. Let's say 4 concurrent conncetions. How can this be done with ip tables? the closest thing, that i've found was: In Apache, is there a way to limit the number of new connections per second/hour/day? iptables -A INPUT -p tcp --dport 80 -i eth0 -m state --state NEW -m recent --set iptables -A INPUT -p tcp --dport 80 -i eth0 -m state --state NEW -m recent --update --seconds 86400 --hitcount 100 -j REJECT But this limitation just messures the number of new connections over the time. This might be good for controlling HTTP traffic. But this is not a good solution for me, since my TCP streams usually have a lifetime between 5 minutes and 2 hours. thanks a lot in advance for any reply :)

    Read the article

  • HOw to deny a particular mac address client not to obtain ip/name from dhcp & dns server..

    - by Deepak Narwal
    Hello Friends... I configures DHCP server on my rhel 5.4 machine.Clients are getting ip from this DHCP server.NO problem upto this.. NOw i want that a particular mac address client do not pick ip from this dhcp server.. Same question is with my DNS server. I want that a particular mac address client do not pick name from this dns server.. PLz discuss in little bit details i am very new in this field.I am learning these things.I hope YOu will give detailed explaiantion.. Thanks IN ADvance friends..

    Read the article

  • wildcard host name bindings for multiple subdomains in multiple sites on IIS7 with a single IP address

    - by orca
    Situation: I have a single windows 2008 server with a single public IP address. I have multiple domains with wildcard A records pointing to the single IP address. I need each domain to be hosted by a different web site. (i.e. www.domain1.com by site domain1site) I need domain1.com to act like www.domain1.com I need each site to be able to have multiple subdomains (i.e. www.domain1.com, abc.domain1.com, xyz.domain1.com) Not relevant yet here it goes, I plan to handle each subdomain by a different application hosted in the same site (i.e. application /xyz in domain1site) However I found out that IIS7 does not support creating web sites with wildcard host name binding and setting it without any subdomain (i.e. domain1.com) does not work, even for www.domain1.com. Is there a simple solution? Does any IIS Extension like Application Request Routing provide such capability?

    Read the article

  • Two virtual host one with Domain name one with internal ip#?

    - by Abhishek
    Is it possible to have two virtual host configurations for the same server - one with internal ip address and one with domain name? Something like <VirtualHost {{internal-ipaddress}}:80> ....... </VirtualHost> <VirtualHost {{domain-name}}:80> ....... </VirtualHost> Note that the internal IP address and the domain name belong to the same server or same server instance. I am asking this to restrict some URLs for external users, redirect to https all external access and allow everything for internal users(without https)..

    Read the article

  • Setting up a server with only subdomains, any connection to top level goes to main server on another IP?

    - by Anagio
    I'm developing a web app where users will have their own sub-domain to login to and use the application. I'm running wordpress for the main website to manage the public / front end. Our application is developed in zend framework. The zf project is currently in a subfolder on the main server. I'd like to place the zend framework project onto another server (different IP) and keep it separate from the the wordpress front end www.domain.com site. The zf application server will run nginx. I'm not sure how to setup a server to run strictly sub domains. Setting up the virtual hosts in the configuration file is no problem. To give the users username.domain.com. But what about the main default configuration file? How would that be configured since the top level domain is technically another server (wordpress) on another IP?

    Read the article

  • How to limit server to specific IP addresses with mod_authz_host?

    - by BeeDog
    Hi! I am very new to this area, so please bear with me. :) Right now I am running an Apache HTTP server on my setup, a very basic configuration. The website hosted on it is accessible from anywhere, and I want to limit the access to a specific IP address range. I've looked into this and I found that one Apache module called mod_authz_host handles this. http://httpd.apache.org/docs/2.2/mod/mod_authz_host.html The problem is, I haven't managed to find documentation that explains well how to actually do the stuff. How do I actually make sure only a certain range of IP addresses can access my site/server? The machine is running Ubuntu Server 10.10, the web files are stored in /var/www/, the apache2 daemon has its stuff stored in /etc/apache2/ and /usr/lib/apache2/modules/*. Thanks in advance, and sorry if this is a stupid question!

    Read the article

  • WAMP - phpmyadmin 403 error from localhost, but not from IP 127.0.0.1?

    - by kdub
    I was wondering if anyone can explain this to me. I installed WAMP 2.2. I opened up the dashboard menu, and clicked localhost. I was brought to the WAMP localhost home page. I clicked on phpmyadmin and get a 403 access is denied error message. However, if I type in the ip address 127.0.0.1/phpmyadmin in the address bar, then VOILA, I am in (however, I am not prompted to login to phpmyadmin, I am instantly brought to the phpmyadmin homepage) Please note, I have found the solution to get rid of the 403 error message when entering phpmyadmin from the the localhost extension (change the Deny all setting to Allow all); so I am not asking how to solve that, but my question is: Why if localhost and 127.0.0.1 go to the same spot, will when using the IP addres, I am granted access to subsequent applications and with localhost I am not? Any feedback would be greatly appreciated.

    Read the article

  • What is the best way to get the external internet gateway IP reported periodically?

    - by basilmir
    I have a OS X Server behind an airport extreme, serving services via opened ports on the airport. The server has a 10.0.x.x local address, always the same one. The airport extreme gets it's external IP address via PPPoE, and sometimes... once a week it changes. For security reasons WE ACTUALLY like this behavior. But i need a way to know the external IP address just in case i need to connect and do something to the server while on the outside. What can i do?

    Read the article

  • What does this error mean (Can't create TCP/IP socket (24))?

    - by user105196
    I have web server with OS RHEL 6.2 and Mysql 5.5.23 on another server and the web server can read from Mysql server without problem, but some time I got this error: [Sun Sep 23 06:13:07 2012] [error] [client XXXXX] DBI connect('XXXX:192.168.1.2:3306','XXX',...) failed: Can't create TCP/IP socket (24) at /var/www/html/file.pm line 199. my question : What does this error mean (Can't create TCP/IP socket (24))? is it OS error or Mysql error ? perl -v This is perl, v5.10.1 (*) built for x86_64-linux-thread-multi mysql -V mysql Ver 14.14 Distrib 5.5.23, for Linux (x86_64) using readline 5.1 su - mysql -s /bin/bash -c 'ulimit -a' core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 127220 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 10240 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >