Search Results

Search found 3887 results on 156 pages for 'processor simulator'.

Page 92/156 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

• Error starting Hyper-V VM

  - by Peter Bernier

  I'm trying to start a VM on a new Hyper-V installation and I'm receiving the following error: The virtual machine could not be started because the hypervisor is not running. The following actions may help you resolve the problem: 1) Verify that the processor of the physical computer has a supported version of hardware-assisted virtualization. 2) Verify that hardware-assisted virtualization and hardware-assisted data execution protection are enabled in the BIOS of the physical computer. (If you edit the BIOS to enable either setting, you must turn off the power to the physical computer and then turn it back on. Resetting the physical computer is not sufficient.) 3) If you have made changes to the Boot Configuration Data store, review these changes to ensure that the hypervisor is configured to launch automatically. My machine supports virtualization at the hardware level and it is enabled in BIOS. Why am I receiving this error?

  Read the article

• Increase backup speed, Backup Exec 2010 - QNAP TS419U+ NAS

  - by user99912

  We have a QNAP NAS and the network shares are being backed up by Backup Exec 2010 over SMB. We can't install the remote agent on the NAS as it has an ARM processor and, as far as I am aware, there is no compatible agent. Do you have any suggestions on any faster method of backing up these shares as opposed to the current scenario? Currently the network bandwidth is not the issue, it seems that this access method is just not able to go any quicker. We've also added the NAS shares to the start of the selection list, but we're still running into 18 hours total backup time (total amount of data on the NAS is roughly 650GB). Any comments and/or suggestions welcome. EDIT: Data is being pulled from the NAS by Backup Exec to a LTO4 tape drive

  Read the article

• Diagnose Slow Video Playback during Editing [closed]

  - by chadejah Hunter

  Possible Duplicate: I Want To Start Editing Videos But My Computer Moves Slowly I am using Windows 7 Home Premium on a PC with AMD 64bit Athlon Processor 2850e @ 1.80GHz, 2GB RAM, and a NVIDIA GeForce 6150SE nForce 430 graphics card I am using Pinnacle Studio 15 HD Ultimate. While editing videos the program moves normally but the playback is slow. When I press play the sound is normal but the picture is really slow and choppy. When the sound ends the picture continues to play and it speeds up. I updated the video card today, restarting the PC but get the same behaviour. Does anyone have any suggestions what I can do to get video working smoothly while editing?

  Read the article

• Better to develop Ruby project on server or buy a faster desktop computer? B/c laptop too slow.

  - by user33184

  I have a Linux laptop (Vostro V13) running a Celeron M chip. This is a fine laptop, but running unit tests especially for Rails applications is slow. I want a faster development environment but I don't want to spend too much money. So the choice I have is between $390 for a Linux desktop machine with a Pentium Dual Core Processor E5400 and just paying between $30 and $40 a month to Linode and trying to do development remotely on that server. Can anyone with experience developing server applications using both methods offer any advice?

  Read the article

• HP Probook 4530s great specs, but lagging. Hard Drive?

  - by Mark

  I have this laptop, which has a i3 processor, 4gb memory, 7200rpm hard drive. So there is nothing wrong with the specs. Even when I have no applications open, simply closing and opening windows, lags. Or opening the start menu, or dragging icons across the desktop. sometimes even the cursor lags. So I checked out the resource monitor, and the resources using disk activity are svchost Avast ------- my antivirus, but not much System (PID 4) ------ This is using a huge chunk The total disk activity fluctuates between %50 - %100

  Read the article

• 64bit on core i5 with 2GB DDR3 RAM?

  - by Jacques

  Core i5 2.3 Ghz processor 512mb ATI HD 4570 2GB 1333 RAM 64bit Windows 7 Home Premium. Should I "down-grade" to 32bit? Does running 64bit with only 2GB RAM make the laptop weaker than running 32bit with 2GB RAM or is the performance pretty much the same? Is there any performance benefit to running 64bit with only 2GB RAM? Is there an impact on battery life between 64bit and 32bit. Should I maybe just add another 2GB RAM? Thanks.

  Read the article

• Most efficient Way to setup a game server

  - by alex bowers

  I'm running a PHP based game which has over 45 Million members predicted for end of this year (2011) Currently we are on 7.5 Million, this game is being ran on facebook and I am in desperate need to help get this game server as efficient and as powerful as possible. it is a dedicated server with Processor Manufacturer Intel Model i7 920 Frequency 4x 2x 2.66 GHz NIC GigaEthernet RAM 12 GB Hard disk 4 x 1 TB specs. It has apache installed, cPanel, phpMyAdmin, several apache mods and MySQL. The game also runs 47 mysql calls per second per user. Is there any alternatives to the above which could be faster, more efficient etc? I dont mind having to recode the game to fit to it, as long as it maximises our upper limit of members on the game. Thanks Also, is there a way to tell what our maximum limit to players, database calls etc is? Thank you again, hope you guys can help :)

  Read the article

• which server is best for me??

  - by mathew

  I am looking for a best hosting service for my website. My website is a PHP MySQl driven site which hase got site scrapping for more than 10 websites and near about 8-10 API pursing and some about 150 mb dat file reading(from local hard drive), and also one rss pursing,Live graph from other sites, geo map from Google,Map api from Google and so on. one widget which real-time result for any one who chose the same. so my question is which is best option for me. actually I am considering softlayer cloud as they are pretty cheap and more facilities than rackspace. another option is a dedicated server which has 2 single core processor, 4GB ram and 250GB sata II. with 100 mbps uplink. so please tell me which will be the best option?? I heard that dedicated server has lots of limitations than cloud. but for cloud they uses SAN for storage so I am afraid the reading proces for database may be bit slower...and their basic plan ram is only 1 GB.

  Read the article

• Does kern.hz still have any relevance in FreeBSD if "dynamic tick mode" is enabled?

  - by Frerich Raabe

  I'm running a FreeBSD 9.0 setup as a virtual machine in a KVM setup. In previous versions of FreeBSD it was common to force the kern.hz setting to a lower value so that the virtual machine does not keep the host busy because it's handling timer interrupts without having any work to do - the FreeBSD Handbook explains: The most important step is to reduce the kern.hz tunable to reduce the CPU utilization of FreeBSD under the Parallels environment. This is accomplished by adding the following line to /boot/loader.conf: kern.hz=100 Without this setting, an idle FreeBSD Parallels guest OS will use roughly 15% of the CPU of a single processor iMac®. After this change the usage will be closer to a mere 5%. However, in FreeBSD 9, the "dynamic tick mode" (aka "tickless mode") is the default, controlled by the kern.eventtimer.periodic setting which defaults to 0 (read: tickless mode). This makes me wonder - does the tip of lowering kern.hz still have any relevance for making FreeBSD 9 play nicely in a virtual machine setup?

  Read the article

• nVidia driver is not installed for x64 Windows 7 (Vaio VGN-SZ460N)

  - by Sergey Osypchuk

  I just upgraded memory to 4GB for Sony Vaio VGN-SZ460N laptop and trying to install Windows 7 x64. All works fine with default drivers, except video - I am not able to set resolution more than 1024x768. Technical specification says that this model is using: Chipset : Intel® 945GM Processor : NVIDIA® GeForce® Go 7400 notebook graphics processing unit (GPU) and Intel® Graphics Media Accelerator 950 I was trying to use Intel 945GM driver, for Windows 7 Ultimate x64 and get error: This computer does not meet the mininum requirements for installing the software Also, I was trying to download nVidia GeForce Go 7400 x64 but it says that there is no compatible hardware. Actually, it has disclaimer that those drivers doesn't work for Sony vaio and recomendation to use OEM website. Sony website has only 32-bit version of driver which says that it cannot be installed and x64 should be used... Any ideas?

  Read the article

• Dell Dimension running Fedora12 does a "Sleeping Beauty" and I am not am not a "handsome prince"!

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Brand new Lenovo u410 heats up around touchpad

  - by Ali

  My Lenovo u410 started heating around the right palm rest minutes after I unpacked it! I am devastated, because I bought this for programming, and it's impossible to type on this for extended periods with the surface getting so hot. I haven't run any serious programs on it yet, so the processor has been pretty much idle. I've been Googling this problem, and found only one person who had this issue too. Is this is a defect in the product? Why aren't many others getting this problem? I bought it via newegg.com and as per their policy you can't return a product once you've opened it. Specs: Core i5, 6 GB RAM, 750 GB harddisk. Running Windows 8.

  Read the article

• How can I be sure that the motherboard is dead and it's not another issue?

  - by Peter

  So I have and old computer with and Intel D101GGC motherboard and a pentium 4 cpu and award bios, with a long repeating beep and not passing POST. I tried: RAM checking, they are good and working on other computers Replacing the PSU with a tested one, and still having the same issue I assumed that the CPU is dead and tested 2 others they are both Celeron D processors I also tested the CPU of this computer on another one and it's working fine I also tried it without RAM and still have the same long beep I did all this after disconnecting all the other hardware like HDD and DVD drives. The only time I didn't get any beeps is after removing the CPU I don't know if the processor is needed for the beeps to work. So My questions are: is it normal to not get any beeps if we don't have a CPU installed ? am I missing something or is the motherboard dead ? and thanks in advance.

  Read the article

• How does the build quality of laptops compare?

  - by pgwillia

  I'm looking to replace my 5 year old laptop. I want my next laptop to endure at least this long. I typically have Thunderbird, Firefox, Eclipse Java IDE, Skype, a ssh session, and Apache Tomcat running. I'm currently running Karmic Ubuntu, but am agnostic about operating system and would move to Win 7 or OS X. I frequently travel with this computer. I also value battery longevity and power conservation (if possible). Above all I'm looking to minimize cost. I think the hardware that best meets my needs is an Intel i7 processor, 8 GB RAM, 100GB @7200 rpm or SSD hardrive, and about 15 inch monitor. These specs are met by most brands. Does anyone know specific pros/cons and build quality for Macbook Pro, Lenovo Thinkpad (W510 or T510), Sony's VPC-F1190, and ASUS G Series G73JH-X1 NoteBook? Are all i7 processors created equal? Do you have other suggestion that meet my needs?

  Read the article

• Computer cannot detect hard disk

  - by Nrew

  Details: BIOS: AMI Bios, set primary master to Auto OS: Windows XP Sp2 Memory: 384 Mb Processor: Pentium 3 yeah this one is really very old. And some of the capacitors in the motherboard are already bulging. It detected the hdd yesterday when were trying to fix it and install xp. But today it cannot boot and said: Boot failure. What can you suggest that I would do to revive this old machine. What would be the problem, is it the hdd, the ide cable or the motherboard.

  Read the article

• AMD Phenom II X4 965 crossfire motherboard

  - by Nick

  I am trying to build a cheap mining rig. I wanted to use the AMD Phenom II X4 965 (HDZ965FBGMBOX) processor as it got very good reviews and benchmarks, and is inexpensive. However, I am having trouble finding motherboards with crossfire support for 2 GPUs. AMD's website only lists five compatible motherboards, of which only one has crossfire support. Worse, it is expensive and seems to be obsolete and no longer available. I have trouble believing that there are only five compatible motherboards for that CPU. Are there any low-end motherboards that are both compatible with the AMD Phenom II X4 965 and have CrossFire support? (Is there a way to find this sort of information, like a central site that lists motherboards and their technical specifications?)

  Read the article

• bad ram or bad motherboard

  - by user39508

  I have a computer which crashes after about 5-45 seconds of operation. It can run memtest86+, and it doesn't display any errors, but it doesn't prevent it from crashing within the time frame listed above. The heat sink appears to be installed correctly, and I don't think it is related to overheating. The motherboard is connected to the ram and a monitor, nothing else is installed. The processor is an atom 330, running memtest86+ 4.0. Any insight into if the ram is bad or if it is the motherboard/psu/cpu? Thanks!

  Read the article

• Where can I find a list of the highest resolution monitors for sale?

  - by speedmetal

  I am always on the lookout for the latest and greatest monitors, but for some reason, I have never found a good resource for this information. And while we know months in advance what new processor will be released, it doesn't seem like we ever know what new monitors will be released until they are. I am tempted to buy a Dell 3008WFP, but since the 30" 2560x1600 monitors have been out for 6 years, I would expect something better is about to be released. Where can I find out what is available in the high resolution / widescreen market and what is soon to be released? EDIT: I did finally find a resource for this information: Comprehensive List of IPS Based LCD Monitors However, if anyone finds another similar or possibly better resource, I will give it a correct answer mark. Thanks!

  Read the article

• I have a dead laptop, what are my options?

  - by Michael Kniskern

  After having my previous question answered by the HP technical support, I now have a HP laptop that does not work properly. HP recommended that I replace the motherboard and processor for a bargain price of $733 US dollars. I originally purchased this laptop back when the Windows Vista was released back in January 2007 for about $2,000 US dollar, but now is an very expensive paperweight. What are my options for this laptop? Do I try to revive it on my own.... What are your suggestions?

  Read the article

• Strange performance from RAID5 using WD RE4 disks

  - by Howard

  I've noticed a bit of a performance issue with some WD RE4 drives I'm using under AMD's hardware RAID solution. First a bit of background: Environment: Windows 7 home premium x64 HDD's: 3x 1TB WD Raid Edition 4 in a RAID 5 setup with 128 kbyte stripe (2TB usable space) Testing Tool: HD Tune, process set to "High Priority" Processor: AMD Phenom II x6 1100T Ram: 16GB DDR3/1600mhz Motherboard: MSI 970A-G45 The image below pretty much depicts the issue I'm having. Every test has the same thing, a period of similar length where the performance drops to a few megabytes a second. This can't be a TLER issue as the purpose of RE4's is to work around that. Any help would be greatly appreciated.

  Read the article

• Is It Possible to Change Default Windows Idle Time for Task Scheduler?

  - by alharaka

  From the official Microsoft docs: Detecting the Idle State The Task Scheduler service will verify that the computer is in an idle state every 15 minutes. The computer is considered idle if all the processors and all the disks were idle for more than 90% of the past 15 minutes and if there is no keyboard or mouse input during this period of time. Besides, any presentation type application that sets the ES_DISPLAY_REQUIRED flag will make Task Scheduler to not consider the system as being idle. In Windows 7, Task Scheduler considers a processor as idle even when low priority threads (thread priority < normal) execute. Is there any way to change the time to less than 15 minutes minutes? Am I assuming this hard-coded and impossible? My Google-fu has eluded me so far and I found nothing, but wanted to check here before giving up.

  Read the article

• Where do I connect the two red SATA cables on my motherboard?

  - by Dennis Smith

  I have a Compaq Presario PC SR5110NX. The Processor is AMD Athlon 64 3800+. It has 512 MB of RAM and a 40GB Hard Drive. I'm running Windows XP Professional on it. I have 2 SATA drives, one is black and the other is white. I have 2 red little cables, and they have the letters and numbers on them. On one side of the cable it says "HP P/N:5188-2897 0720". My motherboard is a MCP61PM-HM Rev 1.0B. Where do I connect the two SATA connectors?

  Read the article

• How to discern video details from Linux Live CD

  - by Chris Lieb

  I was having trouble getting X.Org to work with the video card in a recently aquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?

  Read the article

• How to properly use windows xp mode

  - by user23950

  I just want to know how could I access the applications installed on xp mode in windows 7. I just installed the application in the default location in xp mode which is c:\program files Do I have to install it on the drive where windows 7 is installed so that I could access it quickly? Because I still have to wait for about 2-4 minutes just to open up a word document(ms office installed in xp mode) that is saved in my desktop in my physical machine. Please help. Details: 2Gb of Ram Pentium Dual Core processor 250GB of HDD

  Read the article

• Improve my System, Need some advice/suggestion

  - by Pennf0lio

  Processor: 2.40 gigahertz Intel Core2 Duo Board: ASUSTeK Computer INC. P5B-MX Memory: 2 Gb VideoCard: NVIDIA GeForce 7300 GT HDD: 80GB + 250GB both IDE Operating System: Windows 7 32bit Please give me some advice what to improve in my System. I mainly used it for Graphic Design (eg, Photoshop, Cinema4d, Illustrator, Flash). I was planning to increase my Memory adding 2 GB more, Pushing it to something like 4GB in total. But just found out that recently that I already have 2x2GB installed and should be 4GB in total. When I looked at the properties of my computer, It said "Installed Memory 2GB". I wonder why is that happening? Is the other ram broken?.. I never the computer casing since I bought. so I didn't realize that I already have 2 x 2gb ram. what can you advice. Thanks!

  Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >