Search Results

Search found 18288 results on 732 pages for 'device context'.

Page 93/732 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Can not mount my USB disk-- Ubuntu nor windows[dmesg including]

    - by EthanZ6174
    first, here is my dmesn|tail result right after i plugged the disk: $ dmesg | tail [ 2578.697224] scsi 6:0:0:0: Direct-Access HP v100w PMAP PQ: 0 ANSI: 0 CCS [ 2578.698322] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2578.916464] sd 6:0:0:0: [sdb] 3921920 512-byte logical blocks: (2.00 GB/1.87 GiB) [ 2578.916950] sd 6:0:0:0: [sdb] Write Protect is off [ 2578.916956] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 2578.916961] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2578.922460] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2578.922470] sdb: [ 2578.969570] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 2578.969578] sd 6:0:0:0: [sdb] Attached SCSI removable disk there is nothing after 'sdb:' ... at the meantime, the lsusb shows: $ lsusb Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 004: ID 03f0:3207 Hewlett-Packard Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 045e:0737 Microsoft Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub so... can anyone help me? what's wrong with my USB disk? THX

    Read the article

  • Slow wifi on Ubuntu 12.04 wifi driver ath9k

    - by lunar
    For the last couple of days my wifi connection is extremely slow. I am pretty sure that it is caused by the driver. Can this be improved? lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"MyWiFi" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:68:FE:7B:C7 Bit Rate=58.5 Mb/s Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=48/70 Signal level=-62 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:6960 Missed beacon:0 eth0 no wireless extensions. sudo lshw -class network *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 74:f0:6d:34:c2:4e width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-31-generic-pae firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:d7400000-d740ffff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:4b:38:78:f6:ae capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128) lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 04f2:b1bb Chicony Electronics Co., Ltd Bus 001 Device 004: ID 0b05:1788 ASUSTek Computer, Inc. lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 425M] (rev a1) 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 USB controller: Fresco Logic Device 1400 (rev 01) 06:00.0 Ethernet controller: Atheros Communications Inc. AR8131 Gigabit Ethernet (rev c0) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 05) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 05) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 05) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 05) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 05) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 05) rfkill list all 0: hci0: Bluetooth Soft blocked: yes Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no

    Read the article

  • Laptop monitor stopped working and can't be re-enabled on a Dell Latitude E6410

    - by xektrum
    I'm using Ubuntu 12.04 (upgraded from 11.10), everything seemed to work fine until today when my laptop monitor suddenly stopped working. Here are the facts: My laptop is a Dell Latitude E6410, Intel graphics. External Monitor is attached through a docking station. Everything worked fine for about 6-7 month, then upgraded to 12.04 Issue started today after a week of upgrade. I think the issue started after I ran CounterStrike 1.6, both monitors blinked and then only the attached monitor which is connected to a docking station continued to work I thought at first that was a transient issue but then I've rebooted, removed the battery but the same happens. Laptop Monitor and external monitor work fine up to login screen, but after I login it goes black Whenever I try to re-enable laptop monitor from Display Manager I get errors: The selected configuration for displays could not be applied could not set the configuration for CRTC 63 Not sure what technical details are required but here are some: $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected (normal left inverted right x axis y axis) 1440x900 60.0 + 40.0 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis) $ tail /var/log/Xorg.0.log [ 8367.132] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.132] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.174] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.174] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy [ 8367.265] (WW) intel(0): flip queue failed: Device or resource busy [ 8367.265] (WW) intel(0): Page flip failed: Device or resource busy I'm using gnome-shell, and the only ways I've been able to get both display working have been: 1) Booting with laptop disconnected from docking and then re attach external with VGA instead of DVI, but only worked for a session. 2) Removing xserver-xorg-video-intel, but then I gnome-shell is gone as well as dri I would appreciate any suggestions. Regards, ============================= WORKAROUND FOUND ============================= So I have tried few things and here is what worked: I've installed a newer version of xserver-xorg-video-intel (2.19 vs 2.17) from ppa:xorg-edgers/ppa, it didn't work at first, it was only showing low graphics mode, so I tried with a different linux-image 3.0.0-19-generic-pae instead of 3.2.0-24-generic-pae, which I believe is 12.04 precise default, then everything started to work again, Now I've installed 3.4.0-1-generic-pae from same ppa and everything goes flawless so I believe the issue is either with linux-image 3.0.0-19-generic-pae or xserver-xorg-video-intel 2.17. Hope this helps someone in the future. PS: Now xrandr shows multiple modes for my laptop monitor $ xrandr Screen 0: minimum 320 x 200, current 3120 x 1050, maximum 8192 x 8192 eDP1 connected 1440x900+1680+0 (normal left inverted right x axis y axis) 303mm x 189mm 1440x900 60.0*+ 59.9 40.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 DP1 disconnected (normal left inverted right x axis y axis) HDMI2 disconnected (normal left inverted right x axis y axis) DP2 disconnected (normal left inverted right x axis y axis)

    Read the article

  • Dell 3721 Wifi problem Ubuntu 13.04

    - by Sebastian
    I have a Dell 3721 which comes original with windows 8. I managed it to install ubuntu 12.10 on this laptop, even there was no out of the box drivers. With 12.10 I was forces to install this .deb package couple of times. After installing it, it was ok for some weeks before I have to install it again. Maybe some security updates destroy something which made in necessary to install it again... http://jas.gemnetworks.com/debian/pool/main/w/wireless-bcm43142/wireless-bcm43142-dkms_6.20.55.19-1_amd64.deb My problem is, that this package isnt working with ubuntu 13.04 anymore. So I cant use Wifi now. Also my display is almost dark, I cant change the brightness level with ubuntu 13.04. Hope you can give me some advice. Dell:~$ sudo lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09) 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) 00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) 00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04) 00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) 00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) 00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) 00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) 00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04) 00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) 00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04) 01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) 02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01) @Dell:~$ lsusb Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0a5c:21d7 Broadcom Corp. Bus 001 Device 004: ID 0bda:0129 Realtek Semiconductor Corp. Bus 001 Device 005: ID 0c45:64ad Microdia @Dell:~$ lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) @Dell:~$ sudo lshw -class network *-network Beschreibung: Ethernet interface Produkt: RTL8101E/RTL8102E PCI Express Fast Ethernet controller Hersteller: Realtek Semiconductor Co., Ltd. Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Logischer Name: eth0 Version: 05 Seriennummer: xx:xx:xx:xx:xx:xx Größe: 100Mbit/s Kapazität: 100Mbit/s Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation Konfiguration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8105e-1.fw ip=192.168.2.103 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s Ressourcen: irq:42 ioport:2000(Größe=256) memory:c0404000-c0404fff memory:c0400000-c0403fff *-network UNGEFORDERT Beschreibung: Network controller Produkt: BCM43142 802.11b/g/n Hersteller: Broadcom Corporation Physische ID: 0 Bus-Informationen: pci@0000:02:00.0 Version: 01 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress bus_master cap_list Konfiguration: latency=0 Ressourcen: memory:c0500000-c0507fff

    Read the article

  • Cannot Mount USB 3.0 Hard Disk ?!!

    - by Tenken
    Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

    Read the article

  • django/python: is one view that handles two sibling models a good idea?

    - by clime
    I am using django multi-table inheritance: Video and Image are models derived from Media. I have implemented two views: video_list and image_list, which are just proxies to media_list. media_list returns images or videos (based on input parameter model) for a certain object, which can be of type Event, Member, or Crag. The view alters its behaviour based on input parameter action (better name would be mode), which can be of value "edit" or "view". The problem is that I need to ask whether the input parameter model contains Video or Image in media_list so that I can do the right thing. Similar condition is also in helper method media_edit_list that is called from the view. I don't particularly like it but the only alternative I can think of is to have separate (but almost the same) logic for video_list and image_list and then probably also separate helper methods for videos and images: video_edit_list, image_edit_list, video_view_list, image_view_list. So four functions instead of just two. That I like even less because the video functions would be very similar to the respective image functions. What do you recommend? Here is extract of relevant parts: http://pastebin.com/07t4bdza. I'll also paste the code here: #urls url(r'^media/images/(?P<rel_model_tag>(event|member|crag))/(?P<rel_object_id>\d+)/(?P<action>(view|edit))/$', views.image_list, name='image-list') url(r'^media/videos/(?P<rel_model_tag>(event|member|crag))/(?P<rel_object_id>\d+)/(?P<action>(view|edit))/$', views.video_list, name='video-list') #views def image_list(request, rel_model_tag, rel_object_id, mode): return media_list(request, Image, rel_model_tag, rel_object_id, mode) def video_list(request, rel_model_tag, rel_object_id, mode): return media_list(request, Video, rel_model_tag, rel_object_id, mode) def media_list(request, model, rel_model_tag, rel_object_id, mode): rel_model = tag_to_model(rel_model_tag) rel_object = get_object_or_404(rel_model, pk=rel_object_id) if model == Image: star_media = rel_object.star_image else: star_media = rel_object.star_video filter_params = {} if rel_model == Event: filter_params['event'] = rel_object_id elif rel_model == Member: filter_params['members'] = rel_object_id elif rel_model == Crag: filter_params['crag'] = rel_object_id media_list = model.objects.filter(~Q(id=star_media.id)).filter(**filter_params).order_by('date_added').all() context = { 'media_list': media_list, 'star_media': star_media, } if mode == 'edit': return media_edit_list(request, model, rel_model_tag, rel_object_id, context) return media_view_list(request, model, rel_model_tag, rel_object_id, context) def media_view_list(request, model, rel_model_tag, rel_object_id, context): if request.is_ajax(): context['base_template'] = 'boxes/base-lite.html' return render(request, 'media/list-items.html', context) def media_edit_list(request, model, rel_model_tag, rel_object_id, context): if model == Image: get_media_edit_record = get_image_edit_record else: get_media_edit_record = get_video_edit_record media_list = [get_media_edit_record(media, rel_model_tag, rel_object_id) for media in context['media_list']] if context['star_media']: star_media = get_media_edit_record(context['star_media'], rel_model_tag, rel_object_id) else: star_media = None json = simplejson.dumps({ 'star_media': star_media, 'media_list': media_list, }) return HttpResponse(json, content_type=json_response_mimetype(request)) def get_image_edit_record(image, rel_model_tag, rel_object_id): record = { 'url': image.image.url, 'name': image.title or image.filename, 'type': mimetypes.guess_type(image.image.path)[0] or 'image/png', 'thumbnailUrl': image.thumbnail_2.url, 'size': image.image.size, 'id': image.id, 'media_id': image.media_ptr.id, 'starUrl':reverse('image-star', kwargs={'image_id': image.id, 'rel_model_tag': rel_model_tag, 'rel_object_id': rel_object_id}), } return record def get_video_edit_record(video, rel_model_tag, rel_object_id): record = { 'url': video.embed_url, 'name': video.title or video.url, 'type': None, 'thumbnailUrl': video.thumbnail_2.url, 'size': None, 'id': video.id, 'media_id': video.media_ptr.id, 'starUrl': reverse('video-star', kwargs={'video_id': video.id, 'rel_model_tag': rel_model_tag, 'rel_object_id': rel_object_id}), } return record # models class Media(models.Model, WebModel): title = models.CharField('title', max_length=128, default='', db_index=True, blank=True) event = models.ForeignKey(Event, null=True, default=None, blank=True) crag = models.ForeignKey(Crag, null=True, default=None, blank=True) members = models.ManyToManyField(Member, blank=True) added_by = models.ForeignKey(Member, related_name='added_images') date_added = models.DateTimeField('date added', auto_now_add=True, null=True, default=None, editable=False) class Image(Media): image = ProcessedImageField(upload_to='uploads', processors=[ResizeToFit(width=1024, height=1024, upscale=False)], format='JPEG', options={'quality': 75}) thumbnail_1 = ImageSpecField(source='image', processors=[SmartResize(width=178, height=134)], format='JPEG', options={'quality': 75}) thumbnail_2 = ImageSpecField(source='image', #processors=[SmartResize(width=256, height=192)], processors=[ResizeToFit(height=164)], format='JPEG', options={'quality': 75}) class Video(Media): url = models.URLField('url', max_length=256, default='') embed_url = models.URLField('embed url', max_length=256, default='', blank=True) author = models.CharField('author', max_length=64, default='', blank=True) thumbnail = ProcessedImageField(upload_to='uploads', processors=[ResizeToFit(width=1024, height=1024, upscale=False)], format='JPEG', options={'quality': 75}, null=True, default=None, blank=True) thumbnail_1 = ImageSpecField(source='thumbnail', processors=[SmartResize(width=178, height=134)], format='JPEG', options={'quality': 75}) thumbnail_2 = ImageSpecField(source='thumbnail', #processors=[SmartResize(width=256, height=192)], processors=[ResizeToFit(height=164)], format='JPEG', options={'quality': 75}) class Crag(models.Model, WebModel): name = models.CharField('name', max_length=64, default='', db_index=True) normalized_name = models.CharField('normalized name', max_length=64, default='', editable=False) type = models.IntegerField('crag type', null=True, default=None, choices=crag_types) description = models.TextField('description', default='', blank=True) country = models.ForeignKey('country', null=True, default=None) #TODO: make this not null when db enables it latitude = models.FloatField('latitude', null=True, default=None) longitude = models.FloatField('longitude', null=True, default=None) location_index = FixedCharField('location index', length=24, default='', editable=False, db_index=True) # handled by db, used for marker clustering added_by = models.ForeignKey('member', null=True, default=None) #route_count = models.IntegerField('route count', null=True, default=None, editable=False) date_created = models.DateTimeField('date created', auto_now_add=True, null=True, default=None, editable=False) last_modified = models.DateTimeField('last modified', auto_now=True, null=True, default=None, editable=False) star_image = models.ForeignKey('Image', null=True, default=None, related_name='star_crags', on_delete=models.SET_NULL) star_video = models.ForeignKey('Video', null=True, default=None, related_name='star_crags', on_delete=models.SET_NULL)

    Read the article

  • Xenserver 5.5 U2 a bit unstable with an unstable W2003 VM

    - by twistedbrain
    In the last week I had to reboot the host system twice and the second one by means of the power button. The system is a Dell PE 6950 (4 Opteron dual core, 2,8 Ghz, 16 GB RAM, 900 GB disk in a RAID 10 array composed by 4 450GB 15000 rpm disks) with XenServer 5.5 U2. We're installing it and at now there are working in production a 2003 32 bit Windows server VM with 2 GB RAM, 3 vcpu and about 200 GB disk in 4 partition (12 GB boot, 20 GB program, 80 GB user data, 80 GB other data). The first time I was compressing many Windows 2003 folders (some tens GB by means of W2003 compressed folder option) from a Windows remote console and some hours before my colleague installed Backup Exec agent that was alredy installed and that required a reboot (that was pending). The console stopped responding, it was no more possible to connect by means of remote console or by means of the console of the XenCentre, it was still possible from the network to use the shared folder of the VM and the programs on it (2 db and a GIS program), but the print server didn't work any more and I couldn't give remote reboot from other domain controller hosts. I couldn't stop the virtual machine neither from the XenCentre, neither from the command line of the host also forcing the reboot. I had to reboot the host server. Yesterday it has been worst. I installed a template of another VM, CentOS 5.3 and then, put the DVD in the drive of the host. Then, before the install and after the boot I checked for defect the DVD and the W2003 VM began to respond slowly (I was connected by means of an administration remote console) the task manager showed only mid or low load, it is, only the first of the 3 vcpu was loaded (about 70%), while the other two were about at 20% and also the disk I/O was not so heavy. Then the users were not so happy because they couldn't any more use the MS word docs on the server. I immediately stopped the check of the DVD (to do that I had to force the stop of such Centos 5.3 VM), then some users could again use their docs, but other had still problems, so I decided to reboot the VM, but it doesn't stopped, neither from XenCenter, neither from command line, neither forcing the reboot. Then I tried to reboot of the host, but it didn't worked, neither from the XenCentre, neither from the host prompt (shutdown -r now as root: it told that it was shutting down, but then it didn't did that). So I had to power off by means of the power button of the server (before I tried some Magic SyS REQ, but I saw that Xen isn't compiled with this option enabled). What could you suggest about my problem, what can I look, search and see? In the W2003 VM logs there are no errors or warning to explain what happened. Some more exciting, amusing and inspiring words of poetry (the facts happened around 11 am): \# egrep -i 'err|warning' xensource.log [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: watching xenstore paths: [ /xapi/0/frontend/vbd/51712/hotplug; /local/domain/0/backend/vbd/0/51712/tapdisk-error ] with timeout 1200.000000 seconds [20100219 10:32:05.597|debug|culo|6301 unix-RPC|VBD.plug R:c81bcda701f6|xenops] watch: fired on /local/domain/0/backend/vbd/0/51712/tapdisk-error [20100219 10:32:14.314|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: watching xenstore paths: [ /local/domain/0/backend/vbd/0/51712/shutdown-done; /local/domain/0/error/device/vbd/51712/error ] with timeout 1200.000000 seconds [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/0 [20100219 10:32:14.337|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] xenstore-rm /local/domain/0/error/device/vbd/51712 [20100219 10:32:14.338|debug|culo|6335 unix-RPC|VBD.unplug R:9258f54578d6|xenops] watch: fired on /local/domain/0/error/device/vbd/51712/error [20100219 10:53:48.903|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 14 guest session [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.048|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51744 [20100219 10:53:52.085|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.086|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51728 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/tap/14 [20100219 10:53:52.122|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51712 [20100219 10:53:52.127|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vbd/14 [20100219 10:53:52.128|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vbd/51760 [20100219 10:53:52.496|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:52.497|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/0 [20100219 10:53:53.385|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/0/error/backend/vif/14 [20100219 10:53:53.386|debug|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|xenops] xenstore-rm /local/domain/14/error/device/vif/1 [20100219 10:53:53.389| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/0 [20100219 10:53:53.391| warn|culo|6418|Async.VM.hard_shutdown R:88d2095678f7|hotplug] Warning, deleting 'vif' entry from /xapi/14/hotplug/vif/1 [20100219 11:20:49.766|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|helpers] Ignoring exception: INTERNAL_ERROR: [ Xb.Noent ] while Vmops.destroy_domain: Destroying domid 11 guest session [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.339|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/832 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/tap/11 [20100219 11:20:50.360|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/768 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vbd/11 [20100219 11:20:50.366|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vbd/5696 [20100219 11:20:50.753|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] Device.Vif.hard_shutdown about to blow away backend and error paths [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/0/error/backend/vif/11 [20100219 11:20:50.754|debug|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|xenops] xenstore-rm /local/domain/11/error/device/vif/1 [20100219 11:20:50.757| warn|culo|6484|Async.VM.clean_shutdown R:78d3c3e28cb6|hotplug] Warning, deleting 'vif' entry from /xapi/11/hotplug/vif/1 [20100219 11:28:13.803|debug|culo|6610 inet-RPC|Connection to VM console R:e9f8b76e8975|console] error: INTERNAL_ERROR: [ Unix.Unix_error(63, "connect", "") ]

    Read the article

  • RHEL - blocked FC remote port time out: saving binding

    - by Dev G
    My Server went into a faulty state since the database could not write on the partition. I found out that the partition went into Read Only mode. Finally to fix it, I had to do a hard reboot. Linux 2.6.18-164.el5PAE #1 SMP Tue Aug 18 15:59:11 EDT 2009 i686 i686 i386 GNU/Linux /var/log/messages Oct 31 00:56:45 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 00:57:05 ota3g1 Had[17275]: VCS CRITICAL V-16-1-50086 CPU usage on ota3g1.mtsallstream.com is 100% Oct 31 01:01:47 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:06:50 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:11:52 ota3g1 Had[17275]: VCS ERROR V-16-1-10214 Concurrency Violation:CurrentCount increased above 1 for failover group sg_network Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x2 received Data: x2 x20 x80000 x0 x0 Oct 31 01:12:10 ota3g1 kernel: lpfc 0000:29:00.1: 1:1303 Link Up Event x3 received Data: x3 x1 x10 x1 x0 x0 0 Oct 31 01:12:12 ota3g1 kernel: lpfc 0000:29:00.1: 1:1305 Link Down Event x4 received Data: x4 x20 x80000 x0 x0 Oct 31 01:12:40 ota3g1 kernel: rport-8:0-0: blocked FC remote port time out: saving binding Oct 31 01:12:40 ota3g1 kernel: lpfc 0000:29:00.1: 1:(0):0203 Devloss timeout on WWPN 20:25:00:a0:b8:74:f5:65 NPort x0000e4 Data: x0 x7 x0 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 38617577 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283532153 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 90825 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-16. Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 868841 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-10. Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37759889 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283349449 Oct 31 01:12:40 ota3g1 kernel: printk: 6 messages suppressed. Oct 31 01:12:40 ota3g1 kernel: Aborting journal on device dm-12. Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 12745 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-10, logical block 1545 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_reserve_inode_write: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-10 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-12) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37757897 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 1097 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:40 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:40 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:40 ota3g1 kernel: EXT3-fs error (device dm-16) in ext3_dirty_inode: Journal has aborted Oct 31 01:12:40 ota3g1 kernel: end_request: I/O error, dev sdi, sector 37749121 Oct 31 01:12:40 ota3g1 kernel: Buffer I/O error on device dm-12, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-12 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 Oct 31 01:12:41 ota3g1 kernel: end_request: I/O error, dev sdi, sector 283337089 Oct 31 01:12:41 ota3g1 kernel: Buffer I/O error on device dm-16, logical block 0 Oct 31 01:12:41 ota3g1 kernel: lost page write due to I/O error on dm-16 Oct 31 01:12:41 ota3g1 kernel: sd 8:0:0:4: SCSI error: return code = 0x00010000 df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/cciss-root 4.9G 730M 3.9G 16% / /dev/mapper/cciss-home 9.7G 1.2G 8.1G 13% /home /dev/mapper/cciss-var 9.7G 494M 8.8G 6% /var /dev/mapper/cciss-usr 15G 2.6G 12G 19% /usr /dev/mapper/cciss-tmp 3.9G 153M 3.6G 5% /tmp /dev/sda1 996M 43M 902M 5% /boot tmpfs 5.9G 0 5.9G 0% /dev/shm /dev/mapper/cciss-product 25G 16G 7.4G 68% /product /dev/mapper/cciss-opt 20G 4.5G 14G 25% /opt /dev/mapper/dg_db1-vol_db1_system 18G 2.2G 15G 14% /database/OTADB/sys /dev/mapper/dg_db1-vol_db1_undo 18G 5.8G 12G 35% /database/OTADB/undo /dev/mapper/dg_db1-vol_db1_redo 8.9G 4.3G 4.2G 51% /database/OTADB/redo /dev/mapper/dg_db1-vol_db1_sgbd 8.9G 654M 7.8G 8% /database/OTADB/admin /dev/mapper/dg_db1-vol_db1_arch 98G 24G 69G 26% /database/OTADB/arch /dev/mapper/dg_db1-vol_db1_indexes 240G 14G 214G 6% /database/OTADB/index /dev/mapper/dg_db1-vol_db1_data 275G 47G 215G 18% /database/OTADB/data /dev/mapper/dg_dbrman-vol_db_rman 8.9G 351M 8.1G 5% /database/RMAN /dev/mapper/dg_app1-vol_app1 151G 113G 31G 79% /files/ota /etc/fstab /dev/cciss/root / ext3 defaults 1 1 /dev/cciss/home /home ext3 defaults 1 2 /dev/cciss/var /var ext3 defaults 1 2 /dev/cciss/usr /usr ext3 defaults 1 2 /dev/cciss/tmp /tmp ext3 defaults 1 2 LABEL=/boot /boot ext3 defaults 1 2 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/cciss/swap swap swap defaults 0 0 /dev/cciss/product /product ext3 defaults 1 2 /dev/cciss/opt /opt ext3 defaults 1 2 /dev/dg_db1/vol_db1_system /database/OTADB/sys ext3 defaults 1 2 /dev/dg_db1/vol_db1_undo /database/OTADB/undo ext3 defaults 1 2 /dev/dg_db1/vol_db1_redo /database/OTADB/redo ext3 defaults 1 2 /dev/dg_db1/vol_db1_sgbd /database/OTADB/admin ext3 defaults 1 2 /dev/dg_db1/vol_db1_arch /database/OTADB/arch ext3 defaults 1 2 /dev/dg_db1/vol_db1_indexes /database/OTADB/index ext3 defaults 1 2 /dev/dg_db1/vol_db1_data /database/OTADB/data ext3 defaults 1 2 /dev/dg_dbrman/vol_db_rman /database/RMAN ext3 defaults 1 2 /dev/dg_app1/vol_app1 /files/ota ext3 defaults 1 2 Thanks for all the help.

    Read the article

  • Applying ServiceKnownTypeAttribute to WCF service with Spring

    - by avidgoffer
    I am trying to apply the ServiceKnownTypeAttribute to my WCF Service but keep getting the error below my config. Does anyone have any ideas? <object id="HHGEstimating" type="Spring.ServiceModel.ServiceExporter, Spring.Services"> <property name="TargetName" value="HHGEstimatingHelper"/> <property name="Name" value="HHGEstimating"/> <property name="Namespace" value="http://www.igcsoftware.com/HHGEstimating"/> <property name="TypeAttributes"> <list> <ref local="wcfErrorBehavior"/> <ref local="wcfSilverlightFaultBehavior"/> <object type="System.ServiceModel.ServiceKnownTypeAttribute, System.ServiceModel"> <constructor-arg name="type" value="IGCSoftware.HHG.Business.UserControl.AtlasUser, IGCSoftware.HHG.Business"/> </object> </list> </property> Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: Spring.Objects.Factory.ObjectCreationException: Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [ObjectCreationException: Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46'] Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveInnerObjectDefinition(String name, String innerObjectName, String argumentName, IObjectDefinition definition, Boolean singletonOwner) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:300 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolvePropertyValue(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:150 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveValueIfNecessary(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:112 Spring.Objects.Factory.Config.ManagedList.Resolve(String objectName, IObjectDefinition definition, String propertyName, ManagedCollectionElementResolver resolver) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Config\ManagedList.cs:126 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolvePropertyValue(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:201 Spring.Objects.Factory.Support.ObjectDefinitionValueResolver.ResolveValueIfNecessary(String name, IObjectDefinition definition, String argumentName, Object argumentValue) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\ObjectDefinitionValueResolver.cs:112 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.ApplyPropertyValues(String name, RootObjectDefinition definition, IObjectWrapper wrapper, IPropertyValues properties) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:373 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.PopulateObject(String name, RootObjectDefinition definition, IObjectWrapper wrapper) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:563 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.ConfigureObject(String name, RootObjectDefinition definition, IObjectWrapper wrapper) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:1844 Spring.Objects.Factory.Support.AbstractAutowireCapableObjectFactory.InstantiateObject(String name, RootObjectDefinition definition, Object[] arguments, Boolean allowEagerCaching, Boolean suppressConfigure) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractAutowireCapableObjectFactory.cs:918 Spring.Objects.Factory.Support.AbstractObjectFactory.CreateAndCacheSingletonInstance(String objectName, RootObjectDefinition objectDefinition, Object[] arguments) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractObjectFactory.cs:2120 Spring.Objects.Factory.Support.AbstractObjectFactory.GetObjectInternal(String name, Type requiredType, Object[] arguments, Boolean suppressConfigure) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\AbstractObjectFactory.cs:2046 Spring.Objects.Factory.Support.DefaultListableObjectFactory.PreInstantiateSingletons() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Objects\Factory\Support\DefaultListableObjectFactory.cs:505 Spring.Context.Support.AbstractApplicationContext.Refresh() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\AbstractApplicationContext.cs:911 _dynamic_Spring.Context.Support.XmlApplicationContext..ctor(Object[] ) +197 Spring.Reflection.Dynamic.SafeConstructor.Invoke(Object[] arguments) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Reflection\Dynamic\DynamicConstructor.cs:116 Spring.Context.Support.RootContextInstantiator.InvokeContextConstructor(ConstructorInfo ctor) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:550 Spring.Context.Support.ContextInstantiator.InstantiateContext() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:494 Spring.Context.Support.ContextHandler.InstantiateContext(IApplicationContext parentContext, Object configContext, String contextName, Type contextType, Boolean caseSensitive, String[] resources) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:330 Spring.Context.Support.ContextHandler.Create(Object parent, Object configContext, XmlNode section) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextHandler.cs:280 [ConfigurationErrorsException: Error creating context 'spring.root': Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46'] System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult) +202 System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject) +1061 System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject) +1431 System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission) +56 System.Configuration.BaseConfigurationRecord.GetSection(String configKey) +8 System.Web.Configuration.HttpConfigurationSystem.GetApplicationSection(String sectionName) +45 System.Web.Configuration.HttpConfigurationSystem.GetSection(String sectionName) +49 System.Web.Configuration.HttpConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String configKey) +6 System.Configuration.ConfigurationManager.GetSection(String sectionName) +78 Spring.Util.ConfigurationUtils.GetSection(String sectionName) in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Util\ConfigurationUtils.cs:69 Spring.Context.Support.ContextRegistry.InitializeContextIfNeeded() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextRegistry.cs:340 Spring.Context.Support.ContextRegistry.GetContext() in l:\projects\spring-net\trunk\src\Spring\Spring.Core\Context\Support\ContextRegistry.cs:206 Spring.ServiceModel.Activation.ServiceHostFactory.CreateServiceHost(String reference, Uri[] baseAddresses) in l:\projects\spring-net\trunk\src\Spring\Spring.Services\ServiceModel\Activation\ServiceHostFactory.cs:66 System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +11687036 System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +42 System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +479 [ServiceActivationException: The service '/HHGEstimating.svc' cannot be activated due to an exception during compilation. The exception message is: Error creating context 'spring.root': Error thrown by a dependency of object 'HHGEstimating' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46' : '1' constructor arguments specified but no matching constructor found in object 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' (hint: specify argument indexes, names, or types to avoid ambiguities). while resolving 'TypeAttributes[2]' to 'System.ServiceModel.ServiceKnownTypeAttribute#25A5628' defined in 'assembly [IGCSoftware.HHG.WebService, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null], resource [IGCSoftware.HHG.WebService.Resources.Spring.objects.xml] line 46'.] System.ServiceModel.AsyncResult.End(IAsyncResult result) +11592858 System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +194 System.ServiceModel.Activation.HostedHttpRequestAsyncResult.ExecuteSynchronous(HttpApplication context, Boolean flowContext) +176 System.ServiceModel.Activation.HttpModule.ProcessRequest(Object sender, EventArgs e) +275 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +68 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +75

    Read the article

  • django: failing tests from django.contrib.auth

    - by gruszczy
    When I run my django test I get following errors, that are outside of my test suite: ====================================================================== ERROR: test_known_user (django.contrib.auth.tests.remote_user.RemoteUserCustomTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 160, in test_known_user super(RemoteUserCustomTest, self).test_known_user() File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 67, in test_known_user self.assertEqual(response.context['user'].username, 'knownuser') TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_last_login (django.contrib.auth.tests.remote_user.RemoteUserCustomTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 87, in test_last_login self.assertNotEqual(default_login, response.context['user'].last_login) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_no_remote_user (django.contrib.auth.tests.remote_user.RemoteUserCustomTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 33, in test_no_remote_user self.assert_(isinstance(response.context['user'], AnonymousUser)) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_unknown_user (django.contrib.auth.tests.remote_user.RemoteUserCustomTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 168, in test_unknown_user super(RemoteUserCustomTest, self).test_unknown_user() File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 51, in test_unknown_user self.assertEqual(response.context['user'].username, 'newuser') TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_known_user (django.contrib.auth.tests.remote_user.RemoteUserNoCreateTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 67, in test_known_user self.assertEqual(response.context['user'].username, 'knownuser') TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_last_login (django.contrib.auth.tests.remote_user.RemoteUserNoCreateTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 87, in test_last_login self.assertNotEqual(default_login, response.context['user'].last_login) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_no_remote_user (django.contrib.auth.tests.remote_user.RemoteUserNoCreateTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 33, in test_no_remote_user self.assert_(isinstance(response.context['user'], AnonymousUser)) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_unknown_user (django.contrib.auth.tests.remote_user.RemoteUserNoCreateTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 118, in test_unknown_user self.assert_(isinstance(response.context['user'], AnonymousUser)) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_known_user (django.contrib.auth.tests.remote_user.RemoteUserTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 67, in test_known_user self.assertEqual(response.context['user'].username, 'knownuser') TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_last_login (django.contrib.auth.tests.remote_user.RemoteUserTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 87, in test_last_login self.assertNotEqual(default_login, response.context['user'].last_login) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_no_remote_user (django.contrib.auth.tests.remote_user.RemoteUserTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 33, in test_no_remote_user self.assert_(isinstance(response.context['user'], AnonymousUser)) TypeError: 'NoneType' object is unsubscriptable ====================================================================== ERROR: test_unknown_user (django.contrib.auth.tests.remote_user.RemoteUserTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/remote_user.py", line 51, in test_unknown_user self.assertEqual(response.context['user'].username, 'newuser') TypeError: 'NoneType' object is unsubscriptable ====================================================================== FAIL: test_current_site_in_context_after_login (django.contrib.auth.tests.views.LoginTest) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/lib/pymodules/python2.6/django/contrib/auth/tests/views.py", line 190, in test_current_site_in_context_after_login self.assertEquals(response.status_code, 200) AssertionError: 302 != 200 Could anyone explain me, what am I doing wrong or what I should set to get those tests pass?

    Read the article

  • Why does my layout repeats in device but looks fine on emulator when an image is added in a Relative Layout?

    - by Honey H
    let me try to explain clearly with what I want here. I have a RelativeLayout that contains a header image and the content below it. Now, when i have a header image and a list view below it, the page fits the screen in the device properly, the layout does not repeat. But when I place an image below the header image, the layout repeats in the device. Meaning i could see 2 header images in the device. Some page, I could see half of the header image that is not supposed to be there (repeated header image). However, in emulator, all the pages looks fine and fit the screen nicely. I tried changing to LinearLayout, RelativeLayout inside LinearLayout, Relative Layout, it gave me the same outcome. I hope someone could tell me why this happened. Thanks. Attached is my layout. <?xml version="1.0" encoding="utf-8"?> <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:orientation="vertical" android:background="@drawable/bg" > <ImageView android:id="@+id/header" android:contentDescription="@string/image" android:src= "@drawable/header" android:layout_width="fill_parent" android:layout_height="wrap_content" android:adjustViewBounds="true" android:scaleType="centerCrop"/> <RelativeLayout android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerInParent="true" android:orientation="vertical" > <ImageView android:id="@+id/journal" android:layout_width="150dp" android:layout_height="150dp" android:layout_alignTop="@+id/kick" android:adjustViewBounds="true" android:contentDescription="@string/image" android:padding="10dp" android:src="@drawable/favourite_journal" /> <ImageView android:id="@+id/kick" android:layout_width="150dp" android:layout_height="150dp" android:layout_toRightOf="@+id/journal" android:layout_below="@+id/header" android:adjustViewBounds="true" android:contentDescription="@string/image" android:padding="10dp" android:src="@drawable/favourite_kick" /> <ImageView android:id="@+id/labour" android:layout_width="150dp" android:layout_height="150dp" android:layout_below="@+id/journal" android:layout_alignLeft="@+id/journal" android:adjustViewBounds="true" android:contentDescription="@string/image" android:padding="10dp" android:src="@drawable/favourite_labour" /> <ImageView android:id="@+id/share" android:layout_width="150dp" android:layout_height="150dp" android:layout_below="@+id/kick" android:layout_alignLeft="@+id/kick" android:adjustViewBounds="true" android:contentDescription="@string/image" android:padding="10dp" android:src="@drawable/favourite_share" /> </RelativeLayout> </RelativeLayout>

    Read the article

  • Wix light.exe : error LGHT0001: The system cannot open the device or file specified.

    - by Angelo
    Today we build our product with MSBuild /m to build with multiprocess. Before we do a change to heat some files in pre-build event, build with MSBuild multiprocess can be success. Now build is failed with following exception: 124light.exe : error LGHT0001: The system cannot open the device or file specified. (Exception from HRESULT: 0x8007006E) [...MSI.wixproj] Exception Type: System.IO.FileLoadException Stack Trace: at Microsoft.Tools.WindowsInstallerXml.MergeMod.IMsmMerge2.OpenModule(String fileName, Int16 language) at Microsoft.Tools.WindowsInstallerXml.Binder.MergeModules(String tempDatabaseFile, Output output, FileRowCollection fileRows, StringCollection suppressedTableNames) at Microsoft.Tools.WindowsInstallerXml.Binder.BindDatabase(Output output, String databaseFile) at Microsoft.Tools.WindowsInstallerXml.Binder.Bind(Output output, String file) at Microsoft.Tools.WindowsInstallerXml.Tools.Light.Run(String[] args) (Link target) - light.exe : error LGHT0001: The system cannot open the device or file specified. (Exception from HRESULT: 0x8007006E) [...Msi.wixproj] using Wix 3.8

    Read the article

  • httpModules not working on iis7

    - by roncansan
    Hi, I have the following module public class LowerCaseRequest : IHttpModule { public void Init(HttpApplication context) { context.BeginRequest += new EventHandler(this.OnBeginRequest); } public void Dispose() { } public void OnBeginRequest(Object s, EventArgs e) { HttpApplication app = (HttpApplication)s; if (app.Context.Request.Url.ToString().ToLower().EndsWith(".aspx")) { if (app.Context.Request.Url.ToString() != app.Context.Request.Url.ToString().ToLower()) { HttpResponse response = app.Context.Response; response.StatusCode = (int)HttpStatusCode.MovedPermanently; response.Status = "301 Moved Permanently"; response.RedirectLocation = app.Context.Request.Url.ToString().ToLower(); response.SuppressContent = true; response.End(); } if (!app.Context.Request.Url.ToString().StartsWith(@"http://zeeprico.com")) { HttpResponse response = app.Context.Response; response.StatusCode = (int)HttpStatusCode.MovedPermanently; response.Status = "301 Moved Permanently"; response.RedirectLocation = app.Context.Request.Url.ToString().ToLower().Replace(@"http://zeeprico.com", @"http://www.zeeprico.com"); response.SuppressContent = true; response.End(); } } } } the web.config looks like <system.web> <httpModules> <remove name="WindowsAuthentication" /> <remove name="PassportAuthentication" /> <remove name="AnonymousIdentification" /> <remove name="UrlAuthorization" /> <remove name="FileAuthorization" /> <add name="LowerCaseRequest" type="LowerCaseRequest" /> <add name="UrlRewriter" type="Intelligencia.UrlRewriter.RewriterHttpModule, Intelligencia.UrlRewriter" /> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </httpModules> </system.web> It works grate on my PC running XP and IIS 5.1 but on my webserver running IIS7 and WS 2008 dosn't works, please help I don't know how to work this out. Thanks

    Read the article

  • Hard drive device names are different from one reboot to another in Ubuntu.

    - by Mike
    I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

    Read the article

  • Hard drive device names are different from one reboot to another in Ubuntu.

    - by Mike
    I have an Ubuntu machine (10.04 but had the same problem in 8.04) with a bunch of drives that I use as a file server. 1 SATA that I boot off of. 2 IDE that in RAID1 and 2 SATA in RAID1. The problem is the drives that I have in RAID1 change device names on reboot. This is a problem because the in my mdadm.conf a reference to /dev/sda1, for example, might not work the next time I reboot because /dev/sda1 could be a disk from another array. Any help getting around this would be appreciated. -Mike

    Read the article

  • Authlogic and functional tests - Authlogic::Session::Activation::NotActivatedError: You must activat

    - by adam
    Im getting the errors below despite following the documentation. In test_helper.rb ENV["RAILS_ENV"] = "test" require File.expand_path(File.dirname(__FILE__) + "/../config/environment") require "authlogic/test_case" require 'test_help' require 'shoulda' require File.dirname(__FILE__) + "/factories" In my functional test require 'test_helper' class SentencesControllerTest < ActionController::TestCase setup do :activate_authlogic end context "logged in" do setup do @user = Factory(:user) UserSession.create(@user.id) end context "on GET to :new" do setup do get :new end should "present form with text field" do assert_select('form#new_sentence') do assert_select('textarea#sentence_text') end end end end #context logged in. end in environments.rb config.gem "authlogic" Im not sure why it isnt working. Can anyone help out on this? Authlogic::Session::Activation::NotActivatedError: You must activate the Authlogic::Session::Base.controller with a controller object before creating objects authlogic (2.1.3) lib/authlogic/session/activation.rb:47:in `initialize' authlogic (2.1.3) lib/authlogic/session/klass.rb:64:in `initialize' authlogic (2.1.3) lib/authlogic/session/scopes.rb:79:in `initialize' authlogic (2.1.3) lib/authlogic/session/existence.rb:29:in `new' authlogic (2.1.3) lib/authlogic/session/existence.rb:29:in `create' test/functional/sentences_controller_test.rb:11:in `__bind_1270172858_922804' shoulda (2.10.3) lib/shoulda/context.rb:380:in `call' shoulda (2.10.3) lib/shoulda/context.rb:380:in `run_current_setup_blocks' shoulda (2.10.3) lib/shoulda/context.rb:379:in `each' shoulda (2.10.3) lib/shoulda/context.rb:379:in `run_current_setup_blocks' shoulda (2.10.3) lib/shoulda/context.rb:371:in `run_all_setup_blocks' shoulda (2.10.3) lib/shoulda/context.rb:375:in `run_parent_setup_blocks' shoulda (2.10.3) lib/shoulda/context.rb:359:in `test: logged in on GET to :new should present form with text field. ' /opt/rubymine/rb/testing/patch/testunit/test/unit/ui/testrunnermediator.rb:36:in `run_suite' /opt/rubymine/rb/testing/patch/testunit/test/unit/ui/teamcity/testrunner.rb:215:in `start_mediator' /opt/rubymine/rb/testing/patch/testunit/test/unit/ui/teamcity/testrunner.rb:191:in `start'

    Read the article

  • How to develop screen resolution independent smart device application in C#?

    - by Shailesh Jaiswal
    I am developing smart device application in C#. I am developing this application for 240*320 screen resolution. I want to make this application screen resolution independent so that it can run on different mobile devices with different screen resolutions. Currently I am testing my application on different emulators for platform- Pocket PC 2003, Windows mobile 6 standard SDK & Windows Mobile 6 professional SDK . When I run the application on emulator for 240*320 screen resolution or less than that it works well ( only it provide the horizontal & vertical scrall bar in case of resolution less tha 240*320). If I run my application on emulator with more than 240*320 screen resolution its User Inferface gets badly affected. How to make the smart device application screen resolution independent ? Can you provide me the code or link through which i can resolve the above issue? Is there any setting for making the application screen resolution independent?

    Read the article

  • What should I do when the managed object context fails to save?

    - by dontWatchMyProfile
    Example: I have an Cat entity with an catAge attribute. In the data modeler, I configured catAge as int with a max of 100. Then I do this: [newManagedObject setValue:[NSNumber numberWithInt:125] forKey:@"catAge"]; // Save the context. NSError *error = nil; if (![context save:&error]) { NSLog(@"Unresolved error %@, %@", error, [error userInfo]); } I'm getting an error in the console, like this: 2010-06-12 11:40:41.947 CatTest[2250:207] Unresolved error Error Domain=NSCocoaErrorDomain Code=1610 UserInfo=0x10164d0 "Operation could not be completed. (Cocoa error 1610.)", { NSLocalizedDescription = "Operation could not be completed. (Cocoa error 1610.)"; NSValidationErrorKey = catAge; NSValidationErrorObject = <NSManagedObject: 0x10099f0> (entity: Cat; id: 0x1006a90 <x-coredata:///Cat/t3BCBC34B-8405-4F16-B591-BE804B6811562> ; data: { catAge = 125; catName = "No Name"; }); NSValidationErrorPredicate = SELF <= 100; NSValidationErrorValue = 125; } Well, so I have an validation error. But the odd thing is, that it seems the MOC is broken after this. If I just tap "add" to add another invalid Cat object and save that, I'm getting this: 2010-06-12 11:45:13.857 CatTest[2250:207] Unresolved error Error Domain=NSCocoaErrorDomain Code=1560 UserInfo=0x1232170 "Operation could not be completed. (Cocoa error 1560.)", { NSDetailedErrors = ( Error Domain=NSCocoaErrorDomain Code=1610 UserInfo=0x1215f00 "Operation could not be completed. (Cocoa error 1610.)", Error Domain=NSCocoaErrorDomain Code=1610 UserInfo=0x1209fc0 "Operation could not be completed. (Cocoa error 1610.)" ); } That seems to report two errors now. BUT: When I try to delete now an valid, existing object from the table view (using the default core data template in a navigation-based app), then the app crashes! All I get in the console is: 2010-06-12 11:47:18.931 CatTest[2250:207] Unresolved error Error Domain=NSCocoaErrorDomain Code=1560 UserInfo=0x123eb30 "Operation could not be completed. (Cocoa error 1560.)", { NSDetailedErrors = ( Error Domain=NSCocoaErrorDomain Code=1610 UserInfo=0x1217010 "Operation could not be completed. (Cocoa error 1610.)", Error Domain=NSCocoaErrorDomain Code=1610 UserInfo=0x123ea80 "Operation could not be completed. (Cocoa error 1610.)" ); } ...so no idea where or why it crashes, but it does. So the question is, what are the neccessary steps to take when there's an validation error?

    Read the article

  • Configuring jdbc-pool (tomcat 7)

    - by john
    i'm having some problems with tomcat 7 for configuring jdbc-pool : i`ve tried to follow this example: http://www.tomcatexpert.com/blog/2010/04/01/configuring-jdbc-pool-high-concurrency so i have: conf/server.xml <GlobalNamingResources> <Resource type="javax.sql.DataSource" name="jdbc/DB" factory="org.apache.tomcat.jdbc.pool.DataSourceFactory" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql://localhost:3306/mydb" username="user" password="password" /> </GlobalNamingResources> conf/context.xml <Context> <ResourceLink type="javax.sql.DataSource" name="jdbc/LocalDB" global="jdbc/DB" /> <Context> and when i try to do this: Context initContext = new InitialContext(); Context envContext = (Context)initContext.lookup("java:/comp/env"); DataSource datasource = (DataSource)envContext.lookup("jdbc/LocalDB"); Connection con = datasource.getConnection(); i keep getting this error: javax.naming.NameNotFoundException: Name jdbc is not bound in this Context at org.apache.naming.NamingContext.lookup(NamingContext.java:803) at org.apache.naming.NamingContext.lookup(NamingContext.java:159) pls help tnx

    Read the article

  • How to determine if a device is SATA driven and will be affect by the Sandy Bridge Intel Issue?

    - by joelhaus
    Looking to buy a higher-end Windows 7 laptop, but I'm concerned about the issue with the Intel Sandy Bridge chipset. Otherwise, my price range covers laptops within the latest (Sandy Bridge) generation of the Core i7 family. I understand that there is an issue with SATA ports 2-5 and I use a Windows Home Server over a WiFi connection to share files and backup my PC. The other storage devices that I will use (less frequently) are the built-in DVD-RW disc drive and various devices hooked up to the USB ports (i.e. Android devices, iPod, etc.). The question: Will this setup be negatively impacted by the problem Intel reported about Sandy Bridge? Given this information, is it unwise to purchase a laptop that has this flaw? I really don't know how to determine whether a device is SATA driven or not, so hoping someone can shed some light on this too. Thanks!

    Read the article

  • Creating a UIImage from a rotated UIImageView...

    - by Magic Bullet Dave
    I have a UIImageView with an image in it. I have rotated the image prior to display by setting the transform property of the UIImageView to CGAffineTransformMakeRotation(angle) where angle is the angle in radians. I want to be able to create another UIImage that corresponds to the rotated version that I can see in my view. I am almost there, by rotating the image context I get a rotated image: - (UIImage *) rotatedImageFromImageView: (UIImageView *) imageView { UIImage *rotatedImage; // Get image width, height of the bonuding rectangle CGRect boundingRect = [self getBoundingRectAfterRotation: imageView.bounds byAngle:angle]; // Create a graphics context the size of the boundinf rectangle UIGraphicsBeginImageContext(boundingRect.size); CGContextRef context = UIGraphicsGetCurrentContext(); // Rotate and translate the context CGAffineTransform ourTransform = CGAffineTransformIdentity; ourTransform = CGAffineTransformConcat(ourTransform, CGAffineTransformMakeRotation(angle)); CGContextConcatCTM(context, ourTransform); // Draw the image into the context CGContextDrawImage(context, CGRectMake(0, 0, imageView.image.size.width, imageView.image.size.height), imageView.image.CGImage); // Get an image from the context rotatedImage = [UIImage imageWithCGImage: CGBitmapContextCreateImage(context)]; // Clean up UIGraphicsEndImageContext(); return rotatedImage; } However the image is not rotated about its centre. I have tried all kinds of transforms concatenated with my rotate to get it to rotate around the centre but to no avail. Am I missing a trick? Is this even possible since I am rotating the context not the image? Getting desperate to make this work now, so any help would be appreciated. Dave

    Read the article

  • Building a Universal iPad App - Where is the device recognition code?

    - by JustinXXVII
    I noticed that when I create a new project in XCode for a Universal iPad/iPhone application, the template comes with two separate App Delegate files, one for each device. I can't seem to locate the place in code where it tries to decide which app delegate to use. I have an existing iPhone project I'd like to port to iPad. My thinking was that if I went ahead and designed the iPad project, I could just import my iPhone classes and nibs, and then use the App Delegate and UIDevice to decide which MainWindow.xib to load. The process went like this: Create an iPad project coded as a split-view create brand new classes and nibs for the iPad import iPhone classes and nibs Change build/target settings in accordance with Universal Apps Use [[UIDevice currentDevice] model] in the AppDelegate to decide which MainWindow to load Will this work, or does the app just automatically know which device it's being deployed on? Thanks for any insight you can offer.

    Read the article

  • Is it possible to make a persistent USB serial port regardless ofthe existence of the USB device?

    - by Keith Nicholas
    USB serial ports, especially devices which emulate serial ports, don't quite behave the same as old serial ports, which causes a few problems with some software. old serial ports, always existed, they never come and go out of existence. With USB devices that emulate serial ports, they come and go depending on whether they are powered / reset etc. Is there a way under windows to make the USB serial port permanently exist regardless of the presence of the device? (not just come back as the same name as it was before).

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >