Search Results

Search found 9462 results on 379 pages for 'laptop repair'.

Page 93/379 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • private subnet nat (openvpn / racoon)

    - by Jonas Schnelli
    I have a openvpn subnet 10.8.0.0/24 running one server and one client (laptop). openvpn works fine. Browsing the web over openvpn from the laptop works also fine. Now on the server there is a private subnet with 10.7.8.128/28. The subnet is set up with racoon (IPSEC s2s vpn). The s2s vpn allows me to access the subnet 10.3.5.0/24 at the other s2s vpn end. Works all fine when I'm connected with ssh to my server. From my laptop i can ping 10.7.8.129 (the servers ipsec local ip) but i cannot reach the net 10.3.5.0/24. I tried to add a static route on my laptop 10.3.5.0/24 over gw 10.7.8.129 with no success. Any ideas how i do setup the nat / routing? Thanks

    Read the article

  • Separate brightness/power-saving settings for multiple monitors

    - by MariusMatutiae
    At home, I connect my laptop to an external monitor. Under Linux X server, it works perfectly. Occasionally I watch a movie on the external monitor. When I do, I would like to fold the laptop shut, and just relax. This however triggers my settings for dimming the screen after 10 minutes of inactivity, which in turn extends to the external monitor. I know I could solve the problem by setting dimming to "Never", but this is a waste, causes the laptop to overheat, and is bad for the normal laptop use. How can I set the power saving/brightness specs for the external monitor, independently of the onboard one? I run Debian or Arch, under KDE.

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose? [migrated]

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • lenovo x1 carbon windows 8 frequent wifi disconnect issue

    - by hIpPy
    I'm having frequent wifi disconnects on my Lenovo X1 Carbon Touch laptop. I got this laptop 2 months back and it has been happening ever since about 3-5 times a day and 10 times a week on average. I've Frontier Fios internet. Power connected or not does not matter. Once I get disconnected, I try below to connect again in that order: turn Airplane mode on and off, troubleshoot network problems windows troubleshooter), restart the laptop I'd find that the WiFi adapter would get disabled and sometimes windows troubleshooting would help but more than often I'd end up restarting the laptop. A week back, I upgraded my wifi network adapter drivers (now Intel, version 15.5.6.48, 10/3/2012). I still get disconnected frequently but turning Airplane mode on and off gets me connected again. So the driver update did help. Windows 8 is updated. None of the other devices (nexus, iphone phones, nexus7, ipad tablets) would have wifi issues when my laptop would get disconnected. config: Intel(R) Centrino(R) Advanced-N 6205 (WiFi network adapter) Microsoft Windows 8 Pro Microsoft Windows [Version 6.2.9200] x64-based PC LENOVO System Model: 3443CTO X1 Carbon Touch I recently noticed this log message When I got disconnected in event viewer: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x[XXXXXXXXXXXX]. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any idea?

    Read the article

  • Trying to retrieve data with a thermaltake blacX enclosure: Windows 7 believes the drive to be "uninitialized"

    - by Peeter Joot
    I have a laptop that won't boot. It appears to be a power problem ... laptop auto-turns-off within about 10 seconds of pressing the power button (with power buttons lighted temporarily and no display with or without external monitor). I've followed the dell troubleshooting guide which suggested reseating the memory modules and the hard drives, but that didn't help. Before trying to have the laptop serviced, I wanted to get some data off off the hard drive. I bought a thermaltake blacX enclosure, intending to use this to both use to retrieve the drive data with, and then later use as external storage. Following the instructions (insert cables, insert drive power on) goes fine, and Windows 7 on another laptop installs the device driver software. However, no drive letter shows up in 'Computer'. Under Computer-manage-storage I see the drive is there, and there's an option to "initialize" the drive. The Windows "initialize" dialog gives me the option to pick between "MBR" and "GPT" partitioning, which sounds like a good way to destroy the data on the drive. I'm thinking that I've purchased the wrong device for the job (or that my old drive is damaged). The old drive to recover info from is a Western Digital 500G/7200rpm SATA drive if that is relavent. Both the original laptop and the one I'm using for recovery are running Windows 7. Does anybody have experience with using a blacX enclosure to recover data off an already formatted drive?

    Read the article

  • Windows 7 - ICS - Xbox360

    - by Hailwood
    I am trying to connect my xbox360 to the internet through ICS using my laptop. I have done this a few days ago using the exact same hardware(so no hardware problems) The laptop can browse the internet. The laptop gets its settings though DHCP. I have enabled ICS on the Wireless connection (where the internet is coming from) I have set the xbox and the Wired connection on the laptop to obtain settings automatically. The issue is that the Wired connection only shows 'Unidentified Network'. What could i be doing wrong?

    Read the article

  • Mouse won't work in XP on Latitude

    - by Kyle Brandt
    I have a Latitude D630 Laptop with a Fresh Windows XP install that won't work with a generic external USB mouse. It recognizes the device has been put in but fails to install it. USB keyboards work fine I have tried restarting the laptop Tried starting the machine without the docking station and plugging directly into the laptop Don't have the original CD, but I installed drives from the Dell website until there were no ? icons Tried deleting the USB mouse device and plugging it again

    Read the article

  • Recover license for Photoshop CS3

    - by Buddy
    At the company I work at, an employee was let go. His laptop was a company laptop with Photoshop CS3 installed on it. Photoshop was deactivated so it could be installed on another computer. The license was bought online and emailed to someone, however, that computer crashed and the email with the license is lost. Is there a way to recover the license from the laptop? Are we better off contacting Adobe's customer support?

    Read the article

  • Ubuntu 9.10 freezes when HDMI port is connected

    - by Felipe Hummel
    I have a Sony Vaio FW350 with a HDMI output. I'm trying to use it under Ubuntu 9.10 with a LG LCD monitor 21,5'. The laptop has a Intel 4500 video card. I've tried two approaches: Boot the laptop with the HDMI cable connected and monitor turned on. Result: LCD Monitor keeps turned on but the whole screen is black and Ubuntu do not seem to be initializing. Boot Ubuntu until the end. I then connect the HDMI cable into the Laptop. The mouse and the whole system freezes. In both cases the only way to turn off the laptop is holding the power button. I've looked around the internet for similar problems, but only found workarounds for the same problem with VGA input, not HDMI. I also tried to use metacity before connecting the cable, but still got the same result. Any hints?

    Read the article

  • WIFI connection not working

    - by chris verwey
    We have a wireless network that is set to secure, it does show as unsecure on my laptop, and desktop connect to router but no internet access. other computers on the network require password to connect to router and get internet access. Iphone and Ipads connect using password and also have internet access, what can I do to fix it. Laptop = dell e6410 Router = netgear The laptop work on other wireless networks without any problem

    Read the article

  • Frequent connection drops when playing online games (StarCraft 2, Battlefield 3) and behind NAT - how to diagnose?

    - by Moshev
    I am having some trouble with (I suspect) my wireless router. It's connected to the internet with a regular lan cable and has a static, public IP address. Our two home PCs connect to the router with regular lan cables, plus there's a laptop which connects over wifi. diagram: Internet | | <- isp-supplied cat5 ethernet cable | D-Link D300 ...wifi... laptop / \ / <- cable -> \ PC1 PC2 The PCs and laptop are behind NAT and share the router's public IP. The router is a D-Link D300. PC1 is used for online gaming and I'm experiencing frequent "connection dropped" errors when playing Battlefield 3, StarCraft 2 and the Diablo 3 beta; but not with TeamFortress 2 or the Tribes Ascend beta. The issue goes away when I remove the router and connect PC1 directly to the ISP's cable. I have also tried disconnecting PC2 and the laptop, leaving PC1 as the only machine connected to the router - doesn't help. How can I diagnose what precisely the issue is?

    Read the article

  • solaris + why cant ping to default getway

    - by yael
    I have Solaris machine with IP 10.10.10.100 and default getway 10.10.10.1 and subnet 255.255.255.0 remark - solaris machine connected to cisco switch via cross cable and from switch to my laptop I configure my laptop to connect to my Solaris machine so my laptop IP is 10.10.10.1 and subnet 255.255.255.0 but something not clearly I have ssh connection from my laptop to my Solaris machine ( I mean I in my solaris machine ) but from Solaris machine I can do ping to 10.10.10.1 ? ( how it can be ??? ) please advice why?

    Read the article

  • Synergy configuration with multiple X screens

    - by Rob Drimmie
    I'm having a problem figuring out how to configure synergy to behave on a system with multiple X windows. On my desktop I am running Ubuntu 10.04 LTS. I have two monitors, setup as separate X screens by preference as well as to enable me to rotate the left-hand monitor. I also have a laptop, which I have on the desk in front of me, lower than the other two monitors. I have a very simple synergy.conf: section: screens desktop: laptop.local: end section: links desktop: down = laptop laptop: up = desktop end It works, but on the desktop only on whichever screen I run synergys from in terminal (I haven't set it up to run at startup yet because I've been playing with the configuration). I can't find any information how to reference multiple screens on one system, and would appreciate any help.

    Read the article

  • Cross platform KVM over ethernet

    - by Falmarri
    I'm not sure if this exists, but this is what I'd like to do. I have a laptop and a desktop that I work on about equally. The laptop runs windows 7 and the desktop is on kubuntu 10.04. What I want to be able to do is be able to drag my mouse accross my screen and have it act like my laptop is a second monitor. Whereby I can use my desktop mouse, drag it say to the left off of my desktop monitor, and use it on my laptop (I don't care about the keyboard, just the mouse). Is that possible? Are there any other solutions that exist? I'd prefer not to have a physical kvm switch.

    Read the article

  • how to share files over local network in ubuntu

    - by rails_guy
    I am trying to paste some files from my laptop to desktop. both have ubuntu. From the laptop I can see the desktop under Places - Network. I can see the files in the Desktop but when I try to paste a file it says "permission denied" What can I do on the Desktop so it allows my laptop to paste files?

    Read the article

  • Remote Desktop connection breaks the wireless connection

    - by Michal Talaga
    When I connect to my Windows 8 Professional machine via Remote Desktop (RDP) I almost always get my WiFi connection broken. The setup: T61P Lenovo Laptop + W8 at home Wireless Router with NAT forwards connections to that machine Windows 7 laptop at work connecting to the home laptop When I connect, very often I get to login and suddenly connection is lost and I cannot reconnect again. When I get home I find my WiFi connection is still connected to the Access Point but does not function. Can't even ping the router. What is strange is that disabling wireless with the hardware switch and enabling it again doesn't help. The only way to make it works again: - Reboot - Disable wifi with hardware switch AND disable the network card in Device Manager, then enable both I did not have this problem on the very same laptop when it was running Windows 7. Any hint how can I find where the problem is?

    Read the article

  • run a 2nd computer as an extra processor

    - by MMK
    I have a laptop with a busted l.c.d., but otherwise works fine with an external monitor. I was wondering if it is possible to connect it to my main pc as an extra processor(main pc is getting old, it's only single core processor) and if so how? I currently have them connected with a network cable so that I can access the laptop's hard drive but would like to use it to give my pc a bit more power. Both my pc and my laptop have 2 gb ram and are running windows vista sp2

    Read the article

  • Sync Dropbox remotely

    - by David
    I have Dropbox on my Ubuntu desktop, and I am working remotely on my laptop. I would like to add files from my desktop to Dropbox and then access them on my laptop. So, I did the following: ssh tomydesktop ln -s myfile.txt ~/Dropbox/ and then when I ls ~/Dropbox myfile.txt shows up However, myfile.txt does not show up either on the Dropbox website version of the folder or on my laptop. Do I need to somehow "sync" the Dropbox folder from the desktop? I do not see any sync options on my laptop or on the website.

    Read the article

  • HP Pavilion dv6 overheating, how do I set fan speed to 100% all the time?

    - by henpenben
    So I have a HP Pavilion dv6, and it works fine. But when I play, say, Minecraft, the temperature jumps to around 60c-70c. I wouldn't be bothered by this, but I bought this computer and played Minecraft on my lap. The laptop overheated and the video card melted. (I'm not kidding) So I was wondering how I could set the fan speed on my laptop to 100% all the time so it never overheats. HP has this "HP Coolsense" thing that when I pick up the laptop and wiggle it around a little bit and pretend it's unstable, the fan cranks up to 100%. I want 100% all the time without me having to pick up the laptop every 10 minutes. Thanks, henpenben

    Read the article

  • Using a Token-ring network card instead of a router (?)

    - by John
    I have cable, and the modem only has 1 network plug-in. They said I could buy my own router if I wanted to hook up two computers to it. I have an IBM Turbo 16/4 Token-Ring PC Card 2, which was in the laptop when I bought it, and the laptop also has the typical network plug (not a PC Card). Is there a way I could run the laptop as a server, and plug my desktop into the laptop, so they both have internet without my having to buy a router? (I realize routers are as cheap as $30.) Both computers run Windows XP Pro SP3. (I also have an 10/100 Etherjet Cardbus card (PC Card)). Thanks.

    Read the article

  • How to prevent Vista from entering Sleep mode when certain conditions exist?

    - by idyllhands
    Mainly, I would like to prevent my laptop from entering Sleep mode when I am playing music or streaming video. This is on my laptop, so another option that would work would be to prevent sleep mode whenever the laptop is plugged into my tv via HDMI (ie when HDMI port is in use). Or prevent sleep mode whenever there is audio playing.. I am soon upgrading to Windows 7, so solutions using 7 would be great also/instead. Thanks!

    Read the article

  • When buying hardware, what sites do you trust for information? [closed]

    - by Matt Dawdy
    I won't ask "what laptop should I buy" since the information is likely to change very quickly. However, I am about to buy a laptop, and I honestly don't know where to begin researching this based on my needs. I am hoping that asking about specific sites that do reviews/recommendations that this will still be on topic. I read the 6 guidelines for subjective questions and believe that this question scores favorably. I'm starting a new job in a few weeks, and they want to know what specific laptop to purchase. I'd like to get the most for their money and get a machine that will not need to be replaced in a year. When looking at a site like Dell, it's hard to get a full picture of the performance of a laptop. Does it work with a docking station, and if so, what kinds of video outs are on it? Will it work well when compiling several large projects in .Net? Has anyone had any issues with the machine getting flaky when dragging it from work to home and back all the time? etc. So, if people would enter in their preferred sites they use when researching hardware, and why they prefer that site (x is great for laptop comparisons, y is great for gaming machine reviews, etc) the I hope that this can be a question with valuable answers to others than just myself.

    Read the article

  • What can cause two "identical" setups of IE8 and XP to display things differently?

    - by ccornet
    This has been baffling me for a while. Of the machines I use in visitting Stack Overflow, two of them are machines with the same setup: Dell with Windows XP with IE8. Since they were issued to me by the same company (one to use in the office, one to use at home), they have identical setups as well. But they display certain page elements differently! One is an Optiplex GX620 desktop, the other is an Inspiron 9100 laptop, but somehow the hardware doesn't seem like something that should be overriding how my browser displays things. Nevertheless, the laptop seems to display things differently than what is expected. Differences have included the following: This issue persisted on the laptop after Jeff fixed it, but was repaired for everyone else and on the Desktop. When viewing Vote Counts on a post, the grey line is left immediately beneath the upvotes but a number-sized white space is below that before the downvotes. On the desktop, it displays properly with the two adjacent and divided by a grey line. Code blocks seem to have a blank line at the end on the laptop. The following image illustrates how the last two elements look on the laptop. So, considering that as far as I can tell, these two setups are identical (I have not messed with any settings and they were both initialized identically as well), what else could be causing the display difference?

    Read the article

  • Dual monitors on Windows - How do I set a different DPI or text size on each monitor?

    - by dlux
    My laptop is a 15" wide screen running at 1600x1050, and in addition to that I connect an external 19" LCD which runs at 1280x1024. The problem with this setup is that if I increase the text size to make the laptop screen readable, the text on the external LCD is huge. Normal text on the LCD results in tiny text on the laptop. What options do I have to get around this? I'm using Windows 7 and the laptop is a ThinkPad T61 with an nVidia NVS 140M video chipset. I cannot find any per-display setting in Windows or the nVidia control panel to resolve this.

    Read the article

  • Streaming from a second computer

    - by techgod52
    I play games on my laptop, and they run at about 30-45 fps, which is bearable for me. But when I try to stream, the frame rate drops to 20 or lower, which is unplayable for me. I have a second computer though (a Mac, the laptop is Win7), and I'm wondering if there is anyway to stream the game content (onto Twitch.tv) from my laptop using my Mac. Is this possible, and how would I go about doing it?

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >