priority queue - Page 93

OEM Windows 8 Downgrade to Windows 7

- by user1873048

I recently Purchased an ASUS K55A As you may know, all Windows 8 machines come with a BIOS that contains 'Secure Boot'. This basically makes sure that the BIOS won't load anything other than the Windows 8 OEM bloatware version that comes with new Laptops. However the Asus Bios allows for me to disable the secure boot, and therefore I should be able to revert to Windows 7, Linux, etc. Drivers may or may not be supported. When I put my MINT LINUX boot disc in CD-R Drive and try to boot from ISO, nothing happens. There isn't even a boot priority list in this BIOS... I can provide screen shots later. It just says WINDOWS 8 Bootloader and also on the other tab it says WINDOWS 8 BOOT OVERRIDE Has anybody purchased a windows 8 machine and successfully loaded windows 7 or Linux?

Read the article

Shaping with shorewall complex shaper not work (or I don't understand principle of operation)

- by strangeman

I have router (Debian 6) with 2 network interfaces (and 1 virtual tun interface): eth0 - localnet, 192.168.1.0/24, router ip is 192.168.1.1 eth1 - internet tun0 - openvpn to central office. openvpn network - 10.1.0.0/24, central office network - 192.168.0.0/24 I need shape all traffic, which moves 192.168.1.0/24-192.168.0.1:6666 and 192.168.1.0/24<-192.168.0.1:6666, and restrict its speed to 200kbit. Now, I have this configuration, but its not work: tcdevices (set up interface parameters) #INTERFACE IN-BANDWITH OUT-BANDWIDTH eth0 100mbit 100mbit #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcrules (mark all traffic, which move on 6666 port) #MARK SOURCE DEST PROTO PORT(S) 1 0.0.0.0/0 0.0.0.0/0 tcp 6666 #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE tcclasses (shape all marked traffic) #INTERFACE MARK RATE CEIL PRIORITY OPTIONS eth0 1 200kbit 200kbit 2 eth0 255 9*full/10 full 1 default #LAST LINE -- ADD YOUR ENTRIES BEFORE THIS ONE -- DO NOT REMOVE Where is my mistake?

Read the article

Why is an Ext4 disk check so much faster than NTFS?

- by Brendan Long

I had a situation today where I restarted my computer and it said I needed to check the disk for consistancy. About 10 minutes later (at "1%" complete), I gave up and decided to let it run when I go home. For comparison, my home computer uses Ext4 for all of the partitions, and the disk checks (which run around once week) only take a couple seconds. I remember reading that having fast disk checks was a priority, but I don't know how they could do that. So, how does Ext4 do disk checks so fast? Is there some huge breakthrough in doing this after NTFS came out (~10 years ago)? Note: The NTFS disk is ~300 GB and the Ext4 disk is ~500 GB. Both are about half full.

Read the article

How can I get my email to go to Gmail and my hosted server?

- by Joseph

I've switched my main domain to point the MX to Google Apps, and my actual domain's server with the lowest MX priority. My idea is to have my primary emails on Google Apps, where the secondary are via Cpanel. Is this even possible? Currently MX records read: 0 Google 4 Google 4 Google 9 Google 9 Google 10 My server I have [email protected] which is added in G. Apps, and [email protected] which is only added in cpanel. Is there anyway to get this to work?

Read the article

Selectively routing traffic via ethernet or wifi, with proper DNS (Mac OS X 10.6)

- by Dan

When I'm at work, I access various intranet pages as well as the wider Internet through ethernet. However, the company LAN blocks some ports (e.g. Google Calendar). I can get to those through WiFi. So, I gave the Airport priority, and then using route add, I set up selective routing: all intranet traffic goes through the ethernet and everything else via WiFi: sudo route add 10.0.0.0/8 <intranet gateway>. However, there are a number of intranet sites that have their own DNS; i.e., hr.company.com only resolves on the intranet. The only way that I can get the DNS to work properly is to add the internal DNS server to the Airport DNS listing, however I fear that when I go elsewhere and forget, this will break things. What's the right way to get the DNS to resolve using this setup?

Read the article

CNAME lookup failed temporarily. (#4.4.3)

- by klickverbot

A friend of mine just told me that he can't send mails to accounts on one of my servers via the SMTP server provided by his ISP. The error message in the bounce he gets reads: Hi. This is the qmail-send program at aon.at. I'm afraid I wasn't able to deliver your message to the following addresses. This is a permanent error; I've given up. Sorry it didn't work out. <[email protected]>: CNAME lookup failed temporarily. (#4.4.3) I'm not going to try again; this message has been in the queue too long. Any ideas what could be the reason for this? I have double-checked the DNS records for my domain, but they seem perfectly fine, and from any other mail servers I tested, delivery works flawlessly…

Read the article

Load Balancing and High Availability for Web Site

- by nzgirl

We've developing a database driven (70%/30% read/write load) website using C#.NET, IIS and MS SQL Server 2008 to be hosted on Windows 2008. Due to contractual reasons our setup has to be hosted on our own physical/virtual servers instead of a cloud solution at this stage. Could someone outline or link to some best practices that would provide both high availability (priority at the moment) and eventually load balancing for our site. We're probably looking at some sort of 2 SQL server mirrored system and 2 ISS web servers to start with. Thanks in advance.

Read the article

Postfix - How to process incoming emails?

- by Borivojevic

Hello Does anybody know how to process incoming emails for virtual mailboxes in postfix? I am building web application where users add new content by sending emails to application. Email address used for each user is custom (eg. [email protected]) and it is dynamically created as a Postfix virtual mailbox. User needs to be able to send email to his custom mailbox address ([email protected]) and i want to process each incoming email, parse it's contents and populate my database with data from email. I tried using Postfix After Queue filter but what i really wont is to process emails once they are saved in users virtual mailbox folder.

Read the article

Where are incoming messages queued/stored when sendmail is communicating with a milter?

- by Mike B

CentOS 5.x | SendMail I'd like to better understand how milter hand-offs work. We a remote MTA initiates an SMTP session, my understanding is that Sendmail hands the message data off to the milter during that session. Where/how is this message data stored? Is this all done in memory? Or is there a "queue" area where message data for milter is stored for pickup by the milter? If it helps, let's say I'm calling a milter like this: INPUT_MAIL_FILTER(`foo', `S=unix:/var/lib/foo/foo.sock, F=T, T=C:5m;S:3m;R:5m;E:5m')dnl

Read the article

Rsyslog : copy with change the facility

- by Dom

I have saslauthd with save the logs in LOG_AUTH in our rsyslogd server. It can't be changed without recompiling, and I don't want to do that. I would like to see all the LOG_AUTH in LOG_MAIL, because I do an export to an external machine, and I would like to see all the saslauthd logs in LOG_MAIL in the distant server. Of course, in local I can add "auth.* " in the mail.log file section, but the export will not be in the right file because I filter in export by syslog Facility/Priority. How can I export all the AUTH logs into MAIL logs ? Thanks

Read the article

Solr performance (tomcat) - High load

- by Ward Loockx

I'm relatively new to solr. I have a production site running on a VPS, but now I'm having serious load issues. I don't know where to start in order to get the load down... VPS specs (linode.com 512) 512 MB RAM 4 CPU (1x priority) Looks like my solr server (tomcat) is using a lot of CPU power You can find my solrconfig.xml on http://pastebin.com/qdfi8Med and my schema.xml on http://pastebin.com/rRusDP8b I've tried to increaese the cache size, but this didn't do anything on the load. You can see the stats page below. EDIT - Because the screenshot was unclear, I took smaller screenshots if what (I think) is important. Dismax query handler stats Caches stats Thanks for the help!

Read the article

sticky bit on NFS file system

- by Kris_R

I have a system where to the main server (homes, nfs, ntp, queue...) can log-in only root – all the other users use front-end host with NFS-mounted home directories (RW) and all other software directories (read-only). My problem is, that time to time, if root or normal user with sudo makes some administrative works on front-end some homes of normal users getting sticky bits (drwsr-sr-x). If it happens usually the user can't log-in (as long as permission for his home are not changed to drwxr-xr-x). The last time I saw it after compiling some new software (normal user configure;make) and installation from the same directory as root (su and make install or direct as normal user sudo make install). Can somebody explain me why it happens and what should I do to get rid of this problem? p.s. I'm using CentOS 5.7

Read the article

how can I estimate the conversion speed (fps) of a video based on CPU power? [closed]

- by Ahoura Ghotbi

Atm I am running a video sharing website and I am converting alot of videos. the queue is getting a bit too long (400 videos). I am planning on purchasing a new server and I was wondering if there anyway I can estimate the fps while converting 10 videos at the same time? Regards EXTRA INFO I am using MP4Box (which uses ffmpeg) to handle the encoding etc. Its encoding at 23 CRF, audio bitrate of 96 and audio sampling rate of 44100. The server will have the following processor : Dual Opteron 6272 (2 x 16 cores, 32 cores total) + 128GB RAM.

Read the article

What is this PHP process? It is crippling my server

- by user1019588

This process has been using 65% of my site CPU and has lasted for about 10 minutes now (aren't processes only supposed to go for a couple seconds?) It is obviously something with mysql. This makes sense because I have a lot of queries going, but something still seems a bit odd... This could have something to do with my bad PDO connection that I mentioned in the previous question. Perhaps I am opening too many connections or something like that? Here is the stats on it: Owner: mysql Priority: 0 CPU %: 61.1 Memory %: 0.4 Command:/usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --plugin-dir=/usr/lib64/mysql/plugin --user=mysql --log-error=/var/lib/mysql/cvps54834319.myhost.com.err --pid-file=/var/lib/mysql/cvps54834319.myhost.com.pid Thanks for any help on this. I have over 10GHZ on my server so this is very concerning to me.

Read the article

How to enable Postfix filter on OS X server (Lion) without getting overwritten?

- by mjbraun

I have a Postfix after-queue content filter that works fine on stock Ubuntu Postfix install. However, on a OS X Lion Server I'm testing out, I see this "auto-generated" language in the master.cf file: # ==== Begin auto-generated section ======================================== # This section of the master.cf file is auto-generated by the Server Admin # Mail backend plugin whenever mails settings are modified. smtp inet n - n - 1 postscreen smtpd pass - - n - - smtpd -o receive_override_options=no_address_mappings The problem is, to enable the filter the same area of the master.cf file has to be changed to have an entry like this: smtp inet n - - - - smtpd -o content_filter=mytest_filter:dummy So, it looks like the line would be blown away every I make a change in Server Admin. Is there a better place for me to put the call to the filter such that it's persistent? I appreciate any assistance and/or guidance!

Read the article

Use backups if unavailable (not just down)

- by PriceChild

Using haproxy, I want: A pool of 'main' servers and 'backup' servers, though they don't necessarily have to be in separate pools. Each backend has a low 'maxconn' (in this case 1) Clients should not wait in a queue. If there are no immediately available servers in the 'main' pool they should be shunted to the 'backup' pool without delay. Right now I have one backend, 'main' servers have an absurdly high weighting and it 'works'. acl use_backend + connslots is along the right lines but without the patch in my own answer it isn't perfect. Bonus points for not requiring a modified haproxy binary.

Read the article

What monitor specifications should be taken into consideration to avoid eye problems? [closed]

- by coding crow

I spent time programming on my 13.3" laptop for 8 to 10 hours a day. I was planning to buy a good monitor. Now that I have developed CVS buying a monitor has became an immediate priority. I have spend some time trying to understand what I should buy and why. I could only zero down on the size (20") and LED. So, I'm looking for advice on many other factors like resolution, pixel density, panel technology and so forth. What should I look for in a computer monitor to avoid further eye problems? Why?

Read the article

Load-balance with LAN and Wi-Fi

- by Synox

I have a Mac, which runs Mac OS X 10.6 or Ubuntu 9.10 or Windows XP (Multiboot). Solution can be for any of the systems, whatever works better. I have two ISPs, one can be accessed via Wi-Fi, one can be accessed via LAN. In Mac OS X I can define the priority, which network to choose first. But what I wish to do is to load-balance with both networks. I don't want to buy extra hardware. I have some unused Wi-Fi routers if this would help. Compiling and configuring programs in Linux is no problem for me. Similar question: Load balancing with multiple gateways

Read the article

What can i do when my Ubuntu stucked [closed]

- by Avihai Marchiano

From time to time firefox cause to my Ubuntu machine to stuck.(nothing run on the machine except firefox) I cant move the mouse or move windows by keyboard. In some cases i have wait for a few minutes and than close last open tab in firefox and it solve the problem in other cases i do restart. Is there any way to prevent it, limit forefox in some way? In windows in most cased even with 100% cpu you can do alt-ctrl-delete and get the task manager, is there a top priority combination in linux that give you terminal? Or any other way ... Run on Ubuntux86 with GNOME , 2GB RAM, dual core cpu

Read the article

What factors should be taken into consideration before buying a computer Moniter (display/screen)?

- by coding crow

I work on computer for most of waking day and have been using a 13.3" laptop. I was planning to buy a good monitor/screen/display for sometime now but was lazy. Now I have developed Computer Vision Syndrome and buying a monitor has become immediate priority. I have spend some time on net and trying to understand what should I buy and why? I could only zero down on the size (20") and LED and looking for advice on many other factors like resolution, pixel density, panel technology and so forth. It will be great help if someone experienced can show shed some light on computer monitor best for the programmers spending 8 to 10 hours in front of the screen.

Read the article

WCF Publish/Subscribe and using callbacks to send data to specific users

- by manemawanna

Hello thanks for looking, I'm working on a project at the moment and have become a little stuck. I'm creating a client server app, which allows a client to subscribe to the server to have messages forwarded to it. The issue I'm having is that when the client subscribes I wish for them to only recieve updates that relate to them. The system basically passes messages from a SQL server DB which the server monitors. When a new message is recieved the server should only forward the message to the clients that it applys to, based on whos logged on the client machine. I've had a look and found code samples which sign up for messages to be broadcast across all clients who have subscribed, but not any that show how to identify individual clients and if messages apply to them. If anyone could help or point me in the right direction it would be appreciated. You can now find some of my code below: namespace AnnouncementServiceLibrary { [ServiceContract(CallbackContract = typeof(IMessageCallback))] public interface IMessageCheck { [OperationContract] void MessageCheck(); } } namespace AnnouncementServiceLibrary { public interface IMessageCallback { [OperationContract(IsOneWay = true)] void OnNewMessage(Mess message); } } public bool Subscribe() { try { IMessageCallback callback = OperationContext.Current.GetCallbackChannel<IMessageCallback>(); //If they dont already exist in the subscribers list, adds them to it if (!subscribers.Contains(callback)) subscribers.Add(callback); return true; } catch { //Otherwise if an error occurs returns false return false; } } Subscribe/Unsubscribe: private static readonly List<IMessageCallback> subscribers = new List<IMessageCallback>(); /// <summary> /// Unsubscribes the user from recieving new messages when they become avaliable /// </summary> /// <returns>Returns a bool that indicates whether the operation worked or not</returns> public bool Unsubscribe() { try { IMessageCallback callback = OperationContext.Current.GetCallbackChannel<IMessageCallback>(); //If they exist in the list of subscribers they are then removed if (subscribers.Contains(callback)) subscribers.Remove(callback); return true; } catch { //Otherwise if an error occurs returns false return false; } } Finally this at the moment isnt't working as basically when a user subscribes as it loops through I want it to filter based on the users userID: #region IMessageCheck Members /// <summary> /// This method checks for new messages recieved based on those who have subscribed for the service /// </summary> public void MessageCheck() { //A continuous loop to keep the method going while(true) { //Changes the thread to a sleep state for 2 mins? Thread.Sleep(200000); //Go through each subscriber based on there callback information subscribers.ForEach(delegate(IMessageCallback callback) { //Checks if the person who wanted the callback can still be communicated with if (((ICommunicationObject)callback).State == CommunicationState.Opened) { //Creates a link to the database and gets the required information List<Mess> mess = new List<Mess>(); List<Message> me; List<MessageLink> messLink; AnnouncementDBDataContext aDb = new AnnouncementDBDataContext(); me = aDb.Messages.ToList(); messLink = aDb.MessageLinks.ToList(); //Query to retrieve any messages which are newer than the time when the last cycle finished var result = (from a in messLink join b in me on a.UniqueID equals b.UniqueID where b.TimeRecieved > _time select new { b.UniqueID, b.Author, b.Title, b.Body, b.Priority, a.Read, b.TimeRecieved }); //Foreach result a new message is created and returned to the PC that subscribed foreach (var a in result) { Mess message = new Mess(a.UniqueID, a.Author, a.Title, a.Body, a.Priority, (bool)a.Read, a.TimeRecieved); callback.OnNewMessage(message); } } //If the requesting PC can't be contacted they are removed from the subscribers list else { subscribers.Remove(callback); } }); //Sets the datetime so the next cycle can measure against to see if new messages have been recieved _time = DateTime.Now; } } #endregion

Read the article

Random Access Violation Exception in WPF Application

- by PT1984

Hi, I am facing weird problem while running regression tests on my WPF Application. I am getting AccessViolationException with different stacktraces each time. First : Message :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace : at MS.Win32.PresentationCore.UnsafeNativeMethods.MILUnknown.Release(IntPtr pIUnkown) at MS.Win32.PresentationCore.UnsafeNativeMethods.MILUnknown.ReleaseInterface(IntPtr& ptr) at System.Windows.Media.SafeMILHandle.ReleaseHandle() at System.Runtime.InteropServices.SafeHandle.InternalFinalize() at System.Runtime.InteropServices.SafeHandle.Dispose(Boolean disposing) at System.Runtime.InteropServices.SafeHandle.Finalize() Source :PresentationCore Type : System.AccessViolationException. Second : Message :Attempted to read or write protected memory. This is often an indication that other memory is corrupt. StackTrace : at MS.Win32.PresentationCore.UnsafeNativeMethods.IMILBitmapEffect.GetOutput(SafeHandle THIS_PTR, UInt32 uiIndex, SafeMILHandle pContext, BitmapSourceSafeMILHandle& ppBitmapSource) at System.Windows.Media.Effects.BitmapEffect.GetOutput(SafeHandle unmanagedEffect, Int32 index, BitmapEffectRenderContext context) at System.Windows.Media.Effects.BitmapEffect.GetOutput(BitmapEffectInput input) at System.Windows.Media.Effects.BitmapEffectState.GetEffectOutput(Visual visual, RenderTargetBitmap& renderBitmap, Matrix worldTransform, Rect windowClip, Matrix& finalTransform) at System.Windows.Media.Effects.BitmapEffectVisualState.RenderBitmapEffect(Visual visual, Channel channel) at System.Windows.Media.Effects.BitmapEffectContent.ExecuteRealizationsUpdate() at System.Windows.Media.RealizationContext.RealizationUpdateSchedule.Execute() at System.Windows.Media.MediaContext.Render(ICompositionTarget resizedCompositionTarget) at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget) at System.Windows.Media.MediaContext.AnimatedRenderMessageHandler(Object resizedCompositionTarget) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter) at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.WrappedInvoke(Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Boolean isSingleParameter) at System.Windows.Threading.Dispatcher.Invoke(DispatcherPriority priority, Delegate method, Object arg) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run(Window window) at System.Windows.Application.Run() at Main() Source :PresentationCore Type :System.AccessViolationException In Application Event Log I found following entries : Dispatcher processing has been suspended, but messages are still being processed. Faulting application **.exe, version 1.0.0.*, stamp 4c08d288, faulting module wpfgfx_v0300.dll, version 3.0.6920.1427, stamp 488f3056, debug? 0, fault address 0x0012ec36. My Application uses Dispatcher from another thread, to change the values of the controls , enable - disable those, change visibility etc., the thred is run multiple times in a second. Please let me know if anybody has faced this problem? Thanks in advance, -Prasad

Read the article

Delphi - WndProc() in thread never called

- by Robert Oschler

I had code that worked fine when running in the context of the main VCL thread. This code allocated it's own WndProc() in order to handle SendMessage() calls. I am now trying to move it to a background thread because I am concerned that the SendMessage() traffic is affecting the main VCL thread adversely. So I created a worker thread with the sole purpose of allocating the WndProc() in its thread Execute() method to ensure that the WndProc() existed in the thread's execution context. The WndProc() handles the SendMessage() calls as they come in. The problem is that the worker thread's WndProc() method is never triggered. Note, doExecute() is part of a template method that is called by my TThreadExtended class which is a descendant of Delphi's TThread. TThreadExtended implements the thread Execute() method and calls doExecute() in a loop. I triple-checked and doExecute() is being called repeatedly. Also note that I call PeekMessage() right after I create the WndProc() in order to make sure that Windows creates a message queue for the thread. However something I am doing is wrong since the WndProc() method is never triggered. Here's the code below: // ========= BEGIN: CLASS - TWorkerThread ======================== constructor TWorkerThread.Create; begin FWndProcHandle := 0; inherited Create(false); end; // --------------------------------------------------------------- // This call is the thread's Execute() method. procedure TWorkerThread.doExecute; var Msg: TMsg; begin // Create the WndProc() in our thread's context. if FWndProcHandle = 0 then begin FWndProcHandle := AllocateHWND(WndProc); // Call PeekMessage() to make sure we have a window queue. PeekMessage(Msg, FWndProcHandle, 0, 0, PM_NOREMOVE); end; if Self.Terminated then begin // Get rid of the WndProc(). myDeallocateHWnd(FWndProcHandle); end; // Sleep a bit to avoid hogging the CPU. Sleep(5); end; // --------------------------------------------------------------- procedure TWorkerThread.WndProc(Var Msg: TMessage); begin // THIS CODE IS NEVER CALLED. try if Msg.Msg = WM_COPYDATA then begin // Is LParam assigned? if (Msg.LParam > 0) then begin // Yes. Treat it as a copy data structure. with PCopyDataStruct(Msg.LParam)^ do begin ... // Here is where I do my work. end; end; // if Assigned(Msg.LParam) then end; // if Msg.Msg = WM_COPYDATA then finally Msg.Result := 1; end; // try() end; // --------------------------------------------------------------- procedure TWorkerThread.myDeallocateHWnd(Wnd: HWND); var Instance: Pointer; begin Instance := Pointer(GetWindowLong(Wnd, GWL_WNDPROC)); if Instance <> @DefWindowProc then begin // Restore the default windows procedure before freeing memory. SetWindowLong(Wnd, GWL_WNDPROC, Longint(@DefWindowProc)); FreeObjectInstance(Instance); end; DestroyWindow(Wnd); end; // --------------------------------------------------------------- // ========= END : CLASS - TWorkerThread ======================== Thanks, Robert

Read the article

Partial Trust in WPF 4

- by Hadi Eskandari

I've started a new project in WPF 4 (.NET 4) and trying to see if I can run it in xbap mode. I need to run the application in Full Trust with the new mode made available in .NET 4 which asks the end user if the full trust application should be run. I've set the "Security" mode to "Full Trust" application, and it builds just fine. When I run it, an exception is thrown and IE error message shows the following error. Any ways around it?? Startup URI: T:\projects\Hightech Sources\PayRoll\PayRoll.Web\publish\PayRoll.Web.xbap Application Identity: file:///T:/projects/Hightech%20Sources/PayRoll/PayRoll.Web/publish/PayRoll.Web.xbap#PayRoll.Web.xbap, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1d910f49755d2c97, processorArchitecture=msil/PayRoll.Web.exe, Version=1.0.0.0, Culture=neutral, PublicKeyToken=1d910f49755d2c97, processorArchitecture=msil, type=win32 System.Security.SecurityException: Request for the permission of type 'System.Security.Permissions.FileIOPermission, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. at System.Security.CodeAccessSecurityEngine.Check(Object demand, StackCrawlMark& stackMark, Boolean isPermSet) at System.Security.CodeAccessSecurityEngine.Check(CodeAccessPermission cap, StackCrawlMark& stackMark) at System.Security.CodeAccessPermission.Demand() at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at PayRoll.Web.App.SelectAssemblies() at Caliburn.PresentationFramework.ApplicationModel.CaliburnApplication..ctor() at PayRoll.Web.App..ctor() at PayRoll.Web.App.Main() at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.Runtime.Hosting.ManifestRunner.Run(Boolean checkAptModel) at System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly() at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData) at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext) at System.Windows.Interop.PresentationApplicationActivator.CreateInstance(ActivationContext actCtx) at System.Activator.CreateInstance(ActivationContext activationContext) at System.AppDomain.Setup(Object arg) at System.AppDomain.nCreateInstance(String friendlyName, AppDomainSetup setup, Evidence providedSecurityInfo, Evidence creatorsSecurityInfo, IntPtr parentSecurityDescriptor) at System.Runtime.Hosting.ApplicationActivator.CreateInstanceHelper(AppDomainSetup adSetup) at System.Runtime.Hosting.ApplicationActivator.CreateInstance(ActivationContext activationContext, String[] activationCustomData) at System.Windows.Interop.PresentationApplicationActivator.CreateInstance(ActivationContext actCtx) at System.Activator.CreateInstance(ActivationContext activationContext) at System.Deployment.Application.DeploymentManager.ExecuteNewDomain() at System.Deployment.Application.InPlaceHostingManager.Execute() at MS.Internal.AppModel.XappLauncherApp.ExecuteDownloadedApplication() at System.Windows.Interop.DocObjHost.RunApplication(ApplicationRunner runner) at MS.Internal.AppModel.XappLauncherApp.XappLauncherApp_Exit(Object sender, ExitEventArgs e) at System.Windows.Application.OnExit(ExitEventArgs e) at System.Windows.Application.DoShutdown() at System.Windows.Application.ShutdownImpl() at System.Windows.Application.ShutdownCallback(Object arg) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.StartDispatcherInBrowser(Object unused) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) The action that failed was: Demand The type of the first permission that failed was: System.Security.Permissions.FileIOPermission

Read the article

not able to write log file to specified path(Microsoft Enterprise Library Logging)

- by prince23

hi, i am trying to implement the logging Configuration using Microsoft Enterprise Library Logging class Program { static void Main(string[] args) { LogEntry entry = new LogEntry() { Message = "Hello Ent. Lib. Logging" }; Logger.Write(entry); } } here the entry conyain she details. but these details are not written in the file i web config i have the settings done like this. <?xml version="1.0" encoding="utf-8"?> <configuration> <configSections> <section name="loggingConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.LoggingSettings, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <section name="exceptionHandling" type="Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Configuration.ExceptionHandlingSettings, Microsoft.Practices.EnterpriseLibrary.ExceptionHandling, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> <section name="dataConfiguration" type="Microsoft.Practices.EnterpriseLibrary.Data.Configuration.DatabaseSettings, Microsoft.Practices.EnterpriseLibrary.Data, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" /> </configSections> <loggingConfiguration name="Logging Application Block" tracingEnabled="true" defaultCategory="General" logWarningsWhenNoCategoriesMatch="true"> <listeners> <add fileName="C:\Inetpub\wwwroot\trace.log" header="----------------------------------------" footer="----------------------------------------" formatter="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FlatFileTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FlatFileTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="FlatFile TraceListener" /> <add source="Enterprise Library Logging" formatter="Text Formatter" log="Application" machineName="" listenerDataType="Microsoft.Practices.EnterpriseLibrary.Logging.Configuration.FormattedEventLogTraceListenerData, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" traceOutputOptions="None" filter="All" type="Microsoft.Practices.EnterpriseLibrary.Logging.TraceListeners.FormattedEventLogTraceListener, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Formatted EventLog TraceListener" /> </listeners> <formatters> <add template="Timestamp: {timestamp}
Message: {message}
Category: {category}
Priority: {priority}
EventId: {eventid}
Severity: {severity}
Title:{title}
Machine: {machine}
Application Domain: {appDomain}
Process Id: {processId}
Process Name: {processName}
Win32 Thread Id: {win32ThreadId}
Thread Name: {threadName}
Extended Properties: {dictionary({key} - {value}
)}" type="Microsoft.Practices.EnterpriseLibrary.Logging.Formatters.TextFormatter, Microsoft.Practices.EnterpriseLibrary.Logging, Version=4.1.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" name="Text Formatter" /> </formatters> <categorySources> <add switchValue="All" name="General"> <listeners> <add name="Formatted EventLog TraceListener" /> </listeners> </add> </categorySources> <specialSources> <allEvents switchValue="All" name="All Events" /> <notProcessed switchValue="All" name="Unprocessed Category" /> <errors switchValue="All" name="Logging Errors & Warnings"> <listeners> <add name="Formatted EventLog TraceListener" /> </listeners> </errors> </specialSources> </loggingConfiguration> <exceptionHandling> <exceptionPolicies> <add name="Exception Policy"> <exceptionTypes> <add type="System.Exception, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" postHandlingAction="NotifyRethrow" name="Exception" /> </exceptionTypes> </add> </exceptionPolicies> </exceptionHandling> </configuration> i am trying by best to solve this from past 2 days. if any one knw what is the issue here. why my log file is not written in the specified path. and even the details of log are not written in the file path fileName="C:\Inetpub\wwwroot\trace.log"

Search Results

Search found 4382 results on 176 pages for 'priority queue'.

Page 93/176 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100 | Next Page >

- by user1873048

- by strangeman

- by Brendan Long

- by Joseph

- by Dan

- by klickverbot

- by nzgirl

- by Borivojevic

- by Mike B

- by Dom

- by Ward Loockx

- by Kris_R

- by Ahoura Ghotbi

- by user1019588

- by mjbraun

- by PriceChild

- by coding crow

- by Synox

- by Avihai Marchiano

- by coding crow

- by manemawanna

- by PT1984

- by Robert Oschler

- by Hadi Eskandari

- by prince23

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100 | Next Page >