Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 93/370 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Campus Network Design - Firewalls

  - by user3081239

  I am designing a campus network, and the design looks like this: LINX is The London Internet Exchange and JANET is Joint Academic Network. My goal is an almost-fully redundant with high availability, because it will have to support about 15k people, including academic staff, administrative staff and students. I have read some documents in the process , but I am still not sure about some aspects. I want to dedicate this one to firewalls: what are the driving factors in deciding to employ a dedicated firewall, instead of an embedded firewall in the border router? From what I can see, an embedded firewall has these advantages: Easier to maintain Better integration One less hop Less space requirement Cheaper Dedicated firewall has the advantage of being modular. Is there anything else? What am I missing?

  Read the article

• How to permanently add wireless interfaces with iw

  - by walli

  How can I permanently add virtual wireless interfaces to my network configuration with iw? I created the following interfaces: iw phy phy0 interface add vwlan0 type station iw phy phy0 interface add vwlan1 type __ap The first is configured as a wifi client connecting to an existing network (wpa_supplicant) The second is configured as wireless hotspot (hostapd + dnsmasq) The setup works, but now I can't quite figure out what the best strategy is to save this configuration permanently. Have made an init script for wpa_supplicant Have made an init script for the hotspot Virtual adaptor network settings set in /etc/network/interfaces But all this depends on the wireless interfaces being created. What would be the best way to make sure these interfaces are created before the network is set up and the services are run? As a bonus, since this wireless interface is a usb device, would it be possible to have the interfaces created (and the services started) when the interface is hotplugged? I know you can execute code after a network interface is up, but the wlan0 interface that is hotplugged should never be up. Operating system is raspbian

  Read the article

• Configure BL-C111A IP Camera

  - by csmba

  I am an ATT DSL customer. I want the camera to send an email when motion detection is triggered. Can anyone tell me how he managed to do that using: GMail (I cannot because I don't think it supports SSL) other alternatives if GMail is not supported

  Read the article

• OpenVPN Bridge LAN-to-LAN Configuration?

  - by Shad Reese

  I'm trying to configure an OpenVPN bridge LAN-to-LAN setup. Currently, I have the OpenVPN bridge Server/Client setup up running. On the server-side my br-lan interface has tap0, eth0, and wlan0 in the bridge group. On the client-side the br-lan interface has eth0 and wlan0 in the bridge group, the client tap0 is outside of the br-lan group. Currently the two bridge groups are connected via the wlanO interfaces (server-side is the Access Point - AP and the client-side is the wireless client). My goal is to connect the two bridge groups with a wireless VPN pipe. My network configuration: Server: br-lan: 10.4.96.50 Client: br-lan: 10.4.96.75 tap0: 10.4.96.100 <---- issued by the VPN server. Unfortunately, I'm stuck with using a bridge instead of a routed OpenVPN setup. My question is how (if possible) do I add the client tap0 interface to the client bridge group, as to ensure all traffic between the server/client bridge groups is using the VPN pipe? SERVER CONFIG FILE. config openvpn sample_server # Set to 1 to enable this instance: option enable 1 option port 1194 option proto udp option dev tap0 option key /etc/easy-rsa/keys/server.key option dh /etc/easy-rsa/keys/dh1024.pem option ifconfig_pool_persist /tmp/ipp.txt option server_bridge "10.4.96.50 255.255.255.0 10.4.96.100 10.4.96.200" list push "redirect-gateway local def1" list push "dhcp-option DNS 10.4.96.14" option duplicate_cn 1 option comp_lzo 1 option max_clients 100 option log /tmp/openvpn.log option verb 3 CLIENT CONFIG FILE: config 'openvpn' 'sample_client' option 'enable' '1' option 'client' '1' option 'dev' 'tap' option 'proto' 'udp' list 'remote' '10.4.96.50 1194' option 'status' /tmp/openvpn-status.log option 'log' /tmp/openvpn.log option 'ca' '/etc/easy-rsa/keys/ca.crt' option 'cert' '/etc/easy-rsa/keys/client.crt' option 'key' '/etc/easy-rsa/keys/client.key' option 'comp_lzo' '1' option 'verb' '5' Thanks in advance,

  Read the article

• Visualization Tools for Networks that Change with Time

  - by devin

  Does anyone known of any good Linux tools for visualizing networks that change (quickly) with time. I'm interested in things like: Routes between nodes Delays between nodes (especially as they change with time) Throughput I have root access to all the nodes (so I can run daemons on them all). Also, assume that I either have a management network that is stable or I will collect data and then analyze it offline.

  Read the article

• Linux pptp client stops working after several hours

  - by Aron Rotteveel

  Here's the situation: Setup: 1 Windows Server 2008 machine acting as a Domain Controller and RRAS server 1 CentOS machine in a datacentre located elsewhere PPTP client running on CentOS machine, connected to the DC via When I connect to the DC, everything is working fine. I have set up a static IP for the dialup connection in my RRAS server so that the CentOS machine is automatically assigned the IP 192.168.1.240. Inside the VPN, it is not possible to access this machine on the local IP-address. Perfect. However, after several hours, it simply seems to stop working (IE: I cannot ping to or from this machine on the local network). The strange thing is, however: The DC shows the VPN client as still being connected The CentOS machine shows the network interface as being up There are no entries in my /var/log/messages that indicate a problem Output from ifconfig: ppp0 Link encap:Point-to-Point Protocol inet addr:192.168.1.240 P-t-P:192.168.1.160 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1396 Metric:1 RX packets:43 errors:0 dropped:0 overruns:0 frame:0 TX packets:58 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:4511 (4.4 KiB) TX bytes:15071 (14.7 KiB) Output from route -n: 192.168.1.160 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 ppp0 I have the following in my ip-up.local: route add -net 192.168.1.0 netmask 255.255.255.0 dev ppp0 The situation can be easily fixed by issueing a killall pppd and re-connecting. However, I obviously do not want to do this every X-hours or so. I have tried running pppd with both the debug as the kdebug flag but cannot find the cause of this problem. Currently, my ppp0 network interface seems to be running and the last log lines mentioning it are: Feb 19 14:10:40 graviton pppd[10934]: local IP address 192.168.1.240 Feb 19 14:10:40 graviton pppd[10934]: remote IP address 192.168.1.160 Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up started (pid 10952) Feb 19 14:10:40 graviton pppd[10934]: Script /etc/ppp/ip-up finished (pid 10952), status = 0x0 Feb 19 14:11:27 graviton pptp[10935]: anon log[decaps_gre:pptp_gre.c:414]: buffering packet 190 (expecting 189, lost or reordered) Feb 19 14:11:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:11:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Request received. Feb 19 14:12:37 graviton pptp[10942]: anon log[ctrlp_rep:pptp_ctrl.c:251]: Sent control packet type is 6 'Echo-Reply' Feb 19 14:12:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:13:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:14:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:15:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:16:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:677]: Echo Reply received. Feb 19 14:19:37 graviton pptp[10942]: anon log[logecho:pptp_ctrl.c:679]: no more Echo Reply/Request packets will be reported. I have enabled the persist option. The network interface is still running, but it is still impossible to send data through the VPN. Any help is appreciated.

  Read the article

• Sonicwall routing between multiple subnets on multiple interfaces

  - by Rain

  As shown by the network diagram below, I have two completely separate networks. One is being managed by a Sonicwall NSA 220, the other by some other router (the brand is not important). My goal is to allow devices within the 192.168.2.0/24 network to access devices in the 192.168.3.0/24 network. Allowing the reverse (192.168.3.0/24 - 192.168.2.0/24) is not required. So far, I have done the following: I connected the X3 Interface on the Sonicwall to the 192.168.3.0/24 network switch (shown as the dashed red line in the diagram). Next, I gave it a static ip address of 192.168.3.254 and set the Zone to LAN (the same Zone for the X0 interface). Judging by various articles and KBs I've read, this is all that should be necessary, although it does not work. I can ping 192.168.3.254 from any device in the 192.168.2.0/24 network although I cannot ping/connect to any device within the 192.168.3.0/24 network. Any help would be greatly appreciated! Network Diagram: (I asked a similar, yet more complicated, question earlier; although, I realized that I cannot solve that without first solving this (which may actually solve my original question))

  Read the article

• Linux DNS Multi tenant

  - by spicyramen

  I need to setup a multi-tenant DNS solution in Linux DNS Server. Currently I serve multiple companies: Company ABC, Company XYZ, etc... I need to create a) Forwarder zone b) Reverse Forward Zone. I can easily create a Forward Zone with domain abc.com The challenge I have is that each of my customer components share the same IP address. Hence If I create the Reverse Forward Zone I end up with something like this: abc.com 1.1.1.1 host.abc.com xyz.com 1.1.1.1 host.xyz.com If I perform a reverse lookup on host.abc.com it works fine...but if I do a reverse lookup on 1.1.1.1 I get a load balance response of: attempt: host.abc.com attempt: host.xyz.com attempt: host.abc.com Any ideas? I want to add logic to the DNS configuration to handle DNS reverse lookup based on source machine and respond with right hostname. Workaround: Create multiple DNS but this is not scalable.

  Read the article

• How can I connect any USB device to my computer wirelessly?

  - by daviesgeek

  I am trying to connect the Canon 550D wirelessly to my computer so that I can control it from at a distance. It can connect normally via a USB cable, so I was wondering if there was a way to plug a dongle into the computer, and a dongle into the camera so the two can connect. I'm basically looking for a really long USB cord that will work over long distances (200+ feet). Another important factor is that I really would prefer not having use a power cord, rather just plugging in a dongle, as it will make the setup more mobile. Does anything like this exist? (I know that Cables Unlimited had something like what I wanted, but they went out of business last year)

  Read the article

• Why does my macbook pro have long ping times over wifi?

  - by randynov

  I have been having problems connecting with my wifi. It is weird, the ping times to the router (<30 feet away) seem to surge, often getting over 10s before slowly coming back down. You can see the trend below. I'm on a macbook pro and have done the normal stuff (reset the pram and smc, changed wireless channels, etc.). It happens across different routers, so I think it must be my laptop, but I don't know what it could be. The RSSI value hovers around -57, but I've seen the transmit rate flip between 0, 48 & 54. The signal strength is ~60% with 9% noise. Currently, there are 17 other wireless networks in range, but only one in the same channel. 1 - How can I figure out what's going on? 2 - How can I correct the situation? TIA! Randall PING 192.168.1.1 (192.168.1.1): 56 data bytes 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254 time=781.107 ms 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254 time=681.551 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254 time=610.001 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254 time=544.915 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254 time=547.622 ms 64 bytes from 192.168.1.1: icmp_seq=5 ttl=254 time=468.914 ms 64 bytes from 192.168.1.1: icmp_seq=6 ttl=254 time=237.368 ms 64 bytes from 192.168.1.1: icmp_seq=7 ttl=254 time=229.902 ms 64 bytes from 192.168.1.1: icmp_seq=8 ttl=254 time=11754.151 ms 64 bytes from 192.168.1.1: icmp_seq=9 ttl=254 time=10753.943 ms 64 bytes from 192.168.1.1: icmp_seq=10 ttl=254 time=9754.428 ms 64 bytes from 192.168.1.1: icmp_seq=11 ttl=254 time=8754.199 ms 64 bytes from 192.168.1.1: icmp_seq=12 ttl=254 time=7754.138 ms 64 bytes from 192.168.1.1: icmp_seq=13 ttl=254 time=6754.159 ms 64 bytes from 192.168.1.1: icmp_seq=14 ttl=254 time=5753.991 ms 64 bytes from 192.168.1.1: icmp_seq=15 ttl=254 time=4754.068 ms 64 bytes from 192.168.1.1: icmp_seq=16 ttl=254 time=3753.930 ms 64 bytes from 192.168.1.1: icmp_seq=17 ttl=254 time=2753.768 ms 64 bytes from 192.168.1.1: icmp_seq=18 ttl=254 time=1753.866 ms 64 bytes from 192.168.1.1: icmp_seq=19 ttl=254 time=753.592 ms 64 bytes from 192.168.1.1: icmp_seq=20 ttl=254 time=517.315 ms 64 bytes from 192.168.1.1: icmp_seq=37 ttl=254 time=1.315 ms 64 bytes from 192.168.1.1: icmp_seq=38 ttl=254 time=1.035 ms 64 bytes from 192.168.1.1: icmp_seq=39 ttl=254 time=4.597 ms 64 bytes from 192.168.1.1: icmp_seq=21 ttl=254 time=18010.681 ms 64 bytes from 192.168.1.1: icmp_seq=22 ttl=254 time=17010.449 ms 64 bytes from 192.168.1.1: icmp_seq=23 ttl=254 time=16010.430 ms 64 bytes from 192.168.1.1: icmp_seq=24 ttl=254 time=15010.540 ms 64 bytes from 192.168.1.1: icmp_seq=25 ttl=254 time=14010.450 ms 64 bytes from 192.168.1.1: icmp_seq=26 ttl=254 time=13010.175 ms 64 bytes from 192.168.1.1: icmp_seq=27 ttl=254 time=12010.282 ms 64 bytes from 192.168.1.1: icmp_seq=28 ttl=254 time=11010.265 ms 64 bytes from 192.168.1.1: icmp_seq=29 ttl=254 time=10010.285 ms 64 bytes from 192.168.1.1: icmp_seq=30 ttl=254 time=9010.235 ms 64 bytes from 192.168.1.1: icmp_seq=31 ttl=254 time=8010.399 ms 64 bytes from 192.168.1.1: icmp_seq=32 ttl=254 time=7010.144 ms 64 bytes from 192.168.1.1: icmp_seq=33 ttl=254 time=6010.113 ms 64 bytes from 192.168.1.1: icmp_seq=34 ttl=254 time=5010.025 ms 64 bytes from 192.168.1.1: icmp_seq=35 ttl=254 time=4009.966 ms 64 bytes from 192.168.1.1: icmp_seq=36 ttl=254 time=3009.825 ms 64 bytes from 192.168.1.1: icmp_seq=40 ttl=254 time=16000.676 ms 64 bytes from 192.168.1.1: icmp_seq=41 ttl=254 time=15000.477 ms 64 bytes from 192.168.1.1: icmp_seq=42 ttl=254 time=14000.388 ms 64 bytes from 192.168.1.1: icmp_seq=43 ttl=254 time=13000.549 ms 64 bytes from 192.168.1.1: icmp_seq=44 ttl=254 time=12000.469 ms 64 bytes from 192.168.1.1: icmp_seq=45 ttl=254 time=11000.332 ms 64 bytes from 192.168.1.1: icmp_seq=46 ttl=254 time=10000.339 ms 64 bytes from 192.168.1.1: icmp_seq=47 ttl=254 time=9000.338 ms 64 bytes from 192.168.1.1: icmp_seq=48 ttl=254 time=8000.198 ms 64 bytes from 192.168.1.1: icmp_seq=49 ttl=254 time=7000.388 ms 64 bytes from 192.168.1.1: icmp_seq=50 ttl=254 time=6000.217 ms 64 bytes from 192.168.1.1: icmp_seq=51 ttl=254 time=5000.084 ms 64 bytes from 192.168.1.1: icmp_seq=52 ttl=254 time=3999.920 ms 64 bytes from 192.168.1.1: icmp_seq=53 ttl=254 time=3000.010 ms 64 bytes from 192.168.1.1: icmp_seq=54 ttl=254 time=1999.832 ms 64 bytes from 192.168.1.1: icmp_seq=55 ttl=254 time=1000.072 ms 64 bytes from 192.168.1.1: icmp_seq=58 ttl=254 time=1.125 ms 64 bytes from 192.168.1.1: icmp_seq=59 ttl=254 time=1.070 ms 64 bytes from 192.168.1.1: icmp_seq=60 ttl=254 time=2.515 ms

  Read the article

• What's wrong with my custom patch cables?

  - by stu42j

  I have a box of bulk Cat5e riser cable left over from when I had my house wired. I figured I could use this to make some custom length cables for connecting my computers, switches, etc. I had a crimper already so I bought a bag of RJ45 plugs. I made a few cables several years ago, but my experience/knowledge with this sort of thing is minimal. None of my cables are working. I don't have a tester so I just plug the cable into a computer and switch but I get no link light. I wired them them all straight-through and visual inspection doesn't show any problems. Any ideas what I might be doing wrong?

  Read the article

• Wireless Network Issue, Disconnecting Randomly From Network

  - by Surfer513

  I'm having an odd problem with my wireless network. Here is the background information: Server (Windows Server 2008) 1 to 10 end user machines connecting to the network Layer 3 Access Point (Asus WL-330 gE) connected to ethernet of Server and all machines connect to the network via the AP The end user machines get a connection to the server with no problems initially. But then connections are randomly lost throughout the day to the server/network. The wireless NICs of the machines still see the wireless network but are unable to connect to it. Then after some time the connection is regained automatically. I initially thought there was a problem with this particular AP, but then I took the same make/model AP out of storage and still ran into the problem. Any ideas what could be causing this??? Very confusing that the wireless nics on the end user machines can still see the network but not connect, and that the connections are randomly lost/gained. Thanks in advance!

  Read the article

• Can ping IP address and nslookup hostname but cannot ping hostname

  - by jao

  On a windows 2003 server I can nslookup www.google.com which returns Server: localhost Address: 127.0.0.1 Non-authoritative answer: Name: www.l.google.com Addresses: 74.125.79.104, 74.125.79.147, 74.125.79.99 Aliases: www.google.com I can then ping 74.125.79.104: Pinging 74.125.79.104 with 32 bytes of data: Reply from 74.125.79.104: bytes=32 time=16ms TTL=54 Reply from 74.125.79.104: bytes=32 time=32ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Reply from 74.125.79.104: bytes=32 time=15ms TTL=54 Ping statistics for 74.125.79.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 15ms, Maximum = 32ms, Average = 19ms But I cannot ping www.google.com: Ping request could not find host www.google.com. Please check the name and try again. (this one is different from the other question in that this one has a TLD, it is not a local domain.) Update: I am running a dns server at localhost (127.0.0.1). Even when I change it to use for example opendns, it still can nslookup hostname and ping ip address, but not ping hostname. So what is wrong? Update 2: here is the ipconfig /all result: Windows IP Configuration Host Name . . . . . . . . . . . . : SERVER Primary Dns Suffix . . . . . . . : NETWORK.local Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : NETWORK.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetXtreme Gigabit Ethernet #2 Physical Address. . . . . . . . . : 00-0F-1F-56-3B-AA DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.7.2 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.7.1 DNS Servers . . . . . . . . . . . : 127.0.0.1 Update 3: Thanks everyone for their help and suggestions. I appreciate that. Ipconfig /flushdns returns: Sucessfully flushed the DNS resolver cache Ipconfig /displaydns returns: 2.7.168.192.in-addr.arpa ---------------------------------------- Record Name . . . . . : 2.7.168.192.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : webserver.mydomainname.com 1.0.0.127.in-addr.arpa ---------------------------------------- Record Name . . . . . : 1.0.0.127.in-addr.arpa. Record Type . . . . . : 12 Time To Live . . . . : 0 Data Length . . . . . : 4 Section . . . . . . . : Answer PTR Record . . . . . : localhost Update 4: Wireshark shows the following: 3 11.540542 208.67.220.220 192.168.7.2 DNS Standard query response A 74.125.79.99 A 74.125.79.104 A 74.125.79.147 6 42.056794 192.168.7.2 192.168.7.255 NBNS Name query NB WWW.GOOGLE.COM<00> which is weird: when I ping, it sends a packet to 192.168.7.255 instead of asking the DNS server for an address

  Read the article

• VMware Fusion configuration files missing

  - by jdmuys

  I need to set up port forwarding to my VM in Fusion 5. Everywhere on the net, the solution is described as editing the file: /Library/Application Support/VMware Fusion/vmnet8/nat.conf However, on my install, that file doesn't exist. Neither does the vmnet8 directory. Here is the full content of VMware stuff I have in /Library/Application Support/: /Library/Application Support/ VMware/ VMware Fusion AdminWritable Shared vmInventory usbarb.rules VMware Fusion That's right: /Library/Application Support/VMware Fusion/ exists but is empty. And there is no VMware folder in other Library directories on my system. I am running OS X 10.8.2. I just reinstalled Fusion 5.02, no change. Meanwhile, I have 3 VMs that work just fine. So how am I supposed to set up port forwarding with Fusion 5? Thanks, JD Edit: in a hunch, I tried ps ax | grep natd which returned: 9646 ?? S 0:00.01 /Applications/VMware Fusion.app/Contents/Library/vmnet-natd -s 7 -m /Library/Preferences/VMware Fusion/vmnet8/nat.mac -c /Library/Preferences/VMware Fusion/vmnet8/nat.conf So it seems that the configurations files are now in the directory /Library/Preferences/VMware Fusion. I'll work from here and edit this question as I make progress.

  Read the article

• How do I configure an interface to have *both* a DHCP address and a static address in Ubuntu?

  - by Paul Hoffman

  In a lab setup, I want eth0 on a Ubuntu server box to get a DHCP address for talking to the outside world, and I also want to assign it a static 10.x.y.z address for talking to other boxes on the local network that have 10.x.y.z addresses. I want to do this by editing /etc/network/interfaces. The man page for /etc/network/interfaces is modeled after "here's a bunch of examples, I hope you can figure out the actual rules on your own". I don't see a way to give one interface two addresses using two different methods (static and dhcp), and initial fumbling didn't produce useful results.

  Read the article

• Setup IPsec VPN using ASA5505 behind Juniper SSG5

  - by i_ch3ry

  I have been assigned to establish a Internet IPsecVPN connection between two sites using Cisco ASA5505 A site currently has following setup.(Same setup is expected in another site) Internet-----ADSL Router-----Juniper SSG5-----Intranet (Im not sure what is configured on SSG5 and if router is in bridge mode or if NAT is configured) I was thinking if I should install ASA5505 along with Juniper SSG5? Internet-----ADSL Router-----Juniper SSG5-----Cisco ASA5505(for vpn only)------Intranet or Internet-----ADSL Router-----Cisco ASA5505(for vpn only)-----Juniper SSG5------Intranet My question is if it is possible? What should be the normal way to achieve this goal? Thanks

  Read the article

• How do I connect two computers with a LAN cable?

  - by John

  I have two machines - Windows XP and a laptop using Windows 7. I connected them with a WLAN cable. On the Windows XP machine, I set the IP address to 192.168.0.10. On the Windows 7 laptop, I set the IP address to 192.168.0.20. The laptop can see the Windows XP machine, but Windows XP machine cannot see the Windows 7 machine. But this does NOT concern me. I want to move the files from my desktop (Windows XP) to Windows 7 (laptop). That's why I'm going through all this. The problem is that when I try to connect from Windows 7 to Windows XP machine, I get this window: I don't understand what username/password is needed. I use none on the Windows XP machine. I tried all usernames - no success. Please explain in deep details how to solve my problem so I can connect to my Windows XP machine. EDIT: Maybe this can help: the Windows XP machine is named 'I' and '???????? III' is the name of the laptop. Both computers share one workgroup - WORKGROUP.

  Read the article

• How to stop intermittent playback on airtunes (iTunes + Airport Express)?

  - by Alex B

  Is there a definitive answer for how to stop intermittent "skips" or pauses while playing music from iTunes to an airport express connected to my home stereo? When I read other forums I see a wealth of posts that say "I did XYZ and it's fixed" followed by "I tried XYZ and it didn't work." This does not appear to be signal strength related. The green light on the Airport Express does not turn to yellow/orange. Other wireless devices have no trouble connecting at the same or greater distances from the wireless router.

  Read the article

• Setup LAN to serve webpages and voip and access to the web site from inside LAN with domain name

  - by Mauricio Arias

  I'd like to know if it will work: I have my domain and I´m serving a webpage in a nginx to the internet, but if I type my domain in my laptop inside LAN I access to my modem/router configuration, I cannot access to the web server unless I type the IP address. I would like to add a Bind server after the modem/router - (port forward, ports 80 and 5060), if the request is www.mydomain.com bind should resolve the nginx IP address and serve it, and if it is a voip request should address to the voip server and if I'd like to access to the website from inside LAN I'd like to type mydomain.com. Could I do it with this configuration? Do I need something else? Thanks in advace!

  Read the article

• Multiple vlan issue with procurve switch

  - by Chris-AZ

  I have a cisco asa5505 as my rtr/fw(10.1.3.254). I have vlan 1 and vlan 3. Vlan 1 is my default all access vlan. Vlan 3 is my Guest(dmz) vlan. I can't seem to get a dhcp ip address when my laptop is plugged into port 42 on my procurve. I have plugged my laptop directly into the firewall and it gets a dhcp ip fine(the firewall is dhcp server). the firewall is plugged into port 41. Only vlan3 needs to go over port 41. I'm sure I have a bonehead config problem however I'm about ready to pull out what little hair I have left. vlan 1 name "Computers" forbid 45 untagged 1-41,43-44 ip helper-address 10.1.1.16 ip address 10.1.1.1 255.255.255.0 tagged 46-48 no untagged 42,45 exit vlan 3 name "Guest Wireless" ip helper-address 10.1.3.254 ip address 10.1.3.1 255.255.255.0 tagged 41-42,44-48 exit

  Read the article

• Setting reply priority on Wifi network with QoS?

  - by Omega

  When using a Station and Access Point that support QoS over Wifi, is it possible to set the priority (= Traffic Identifier = TID = QoS channel) of the reply? For example when sending a ICMP ping request using a high priority (= QoS channel), is it possible to force the station to use that same priority (= QoS channel) when sending the reply? A related question: Is it possible to force the station into using a different QoS channel?

  Read the article

• Setting reply priority on Wifi network with QoS?

  - by Omega

  When using a Station and Access Point that support QoS over Wifi, is it possible to set the priority (= Traffic Identifier = TID = QoS channel) of the reply? For example when sending a ICMP ping request using a high priority (= QoS channel), is it possible to force the station to use that same priority (= QoS channel) when sending the reply? A related question: Is it possible to force the station into using a different QoS channel?

  Read the article

• configuring two network interfaces in ubuntu 10.04.1

  - by Bill Smith

  I have got two NICs configured on a VM - each is tied to a specific network, one is a DMZ, the other is an internal network. I want MySQL to listen on the internal network only and Apache on the DMZ listening for HTTP and HTTPS. But as soon as I add the second interface I run into trouble. I can hit HTTP on either interface, but can not hit 3306 on the internal network for MySQL. Here's the config... could someone sanity check this please? auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.153.24.230 netmask 255.255.255.240 network 10.153.24.224 broadcast 10.153.24.239 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.153.24.195 netmask 255.255.255.224 gateway 10.153.24.193 broadcast 10.153.23.223

  Read the article

• Configuring VLAN's on two HP procurve switches

  - by pan

  Trying to route a new ISP (Microwave link) from one of my out buildings to my computer room and hence my firewall. Old ISP came direct into firewall. In the outbuilding the Microwave modem connects with cat5 to HP Procurve 2524 switch. Because this ISP is coming through my internal network, I plan on using a new vlan called "airspeed" only for this ISP traffic. Up until now I've just been using the Default_vlan on both HP switches (4108 + 2524). So far I've been unable to ping from my laptop to the ISP modem both of which are on the new vlan 2 ("Airspeed"). No traffic needs to cross from vlan 2 to vlan 1 so I've left the ports as untagged. I've used the subnet provide from my ISP as the new vlan 2 subnet. Can anybody see what I'm doing wrong here? I've added the configuration of both switch below. Rough diagram: Microwave modem (Gateway IP 77.75.00.49) | HP 2524 switch (port 24) | HP 2524 switch fibre link | HP 4108GL switch fibre link | HP 4108GL switch (port D1) | Laptop configured with IP 77.75.00.50 (for testing but will be connected to firewall) And my 4108GL config: ; J4865A Configuration Editor; Created on release #G.07.21 hostname "HP ProCurve Switch 4108GL" cdp run module 1 type J4864A module 2 type J4862B module 3 type J4862B module 4 type J4862B ip default-gateway 128.1.146.50 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged A1-A3,B1-B24,C1-C24,D2-D24 ip address 128.1.146.203 255.255.0.0 no untagged D1 exit vlan 2 name "Airspeed" untagged D1 ip address 77.75.00.51 255.255.255.248 exit Finally my 2524 config: ; J4813A Configuration Editor; Created on release #F.04.08 hostname "HP ProCurve Switch 2524" cdp run ip default-gateway 0.0.0.0 snmp-server community "public" Unrestricted snmp-server host 128.1.146.51 "public" Not-INFO snmp-server host 128.1.146.51 "public" snmp-server host 128.1.146.38 "public" vlan 1 name "DEFAULT_VLAN" untagged 1-23,25-26 no untagged 24 ip address 128.1.146.204 255.255.0.0 exit vlan 2 name "Airspeed" untagged 24 ip address 77.75.00.51 255.255.255.248 exit no aaa port-access authenticator active

  Read the article

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >