Search Results

Search found 2730 results on 110 pages for 'storing'.

Page 93/110 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• How can I determine when an InnoDB table was last changed?

  - by David M

  I've had success in the past storing the (heavily) processed results of a database query in memcached, using the last update time of the underlying tables(s) as part of the cache key. For MyISAM tables, that last changed time is available in SHOW TABLE STATUS. Unfortunately, that's usually NULL for InnoDB tables. In MySQL 4.1, the ctime for an InnoDB in its SHOW TABLE STATUS line was usually its actual last update time, but that doesn't seem to be true for MySQL 5.1. There is a DATETIME field in the table, but it only shows when a row has been modified - it cannot show the deletion time of a row that's not there anymore! So, I really cannot use MAX(update_time). Here's the really tricky part. I have a number of replicas that I do reads from. Can I figure out the state of the table that doesn't rely on when the changes have actually been applied? My conclusion after working on this for a while is that it's not going to be possible to get this information as cheaply as I'd like. I'm probably going to cache data until the time that I expect the table to change (it's updated once a day), and let the query cache help out where it can.

  Read the article

• Self organizing layouts

  - by user613326

  Quite a while ago i was more in websites building then i am now. In my time there where huge debates about what to use; tables or pure CSS alternatives. I went out of the webdesigning, but now an old question re-surfaces. What i would like to create is a web page design that depending on screensize, would self organize the page into columns, so that for example on a PDA it would show 1 column On an old computer monitor, it would show 2 colomns, and on a widescreen laptop it would show 3 columns. I forgot how this was called and how it was done in the past, it had to do with XML and storing data seperate from design (if i remember well), perhaps these days better methods exist to do that, does this, anyone ring this a bell ? Also i note a lot is possible with Jquery and and brouwser depending webkits. But i need to make sure that it would run on all (modern) brouwsers : Iexplorer, Firefox, chrome And Jquery is nice too, but i am kinda woried that some day one of these brouwser vendors decides that jscript like java isnt enabled by default (or is that very unlikely ?)11 Perhaps someone can point me to a method that is the prefered way to do this.

  Read the article

• How do I implement Hibernate Pagination using a cursor (so the results stay consistent, despite new

  - by hunterae

  Hey all, Is there any way to maintain a database cursor using Hibernate between web requests? Basically, I'm trying to implement pagination, but the data that is being paged is consistently changing (i.e. new records are added into the database). We are trying to set it up such that when you do your initial search (returning a maximum of 5000 results), and you page through the results, those same records always appear on the same page (i.e. we're not continuously running the query each time next and previous page buttons are clicked). The way we're currently implementing this is by merely selecting 5000 (at most) primary keys from the table we're paging, storing those keys in memory, and then just using 20 primary keys at a time to fetch their details from the database. However, we want to get away from having to store these keys in memory and would much prefer a database cursor that we just keep going back to and moving backwards and forwards over the cursor to generate pages. I tried doing this with Hibernate's ScrollableResults but found that I could not call methods like next() and previous() would cause an exception if you within a different web request / Hibernate session (no surprise there). Is there any way to reattach a ScrollableResults object to a Session, much the same way you would reattach a detached database object to make it persistent? Are there any other approaches to implement this data paging with consistent paging results without caching the primary keys?

  Read the article

• Unexpected results when looking at ASCII codes in C++.

  - by Columbo

  Hello, The bit of code below is extracting ASCII codes from characters. When I convert characters in the normal ASCII region I get the value I expect. When I convert £ and € from the extened region I get a load of 1's padding the INT that I'm storing the character in. e.g. the output of the below is: 45 (ascii E as expected) FFFFFF80 (extended ascii € as expected but padded with ones) It's not causing me an issue but I'm just wondering why this happens. Here's the code... unsigned int asciichar[3]; string cTextToEncode = "E€"; for (unsigned int i = 0; i < cTextToEncode.length(); i++) { asciichar[i] = (unsigned int)cTextToEncode[i]; cout << hex << asciichar[i] << "\n"; } Can anyone explain why this is? Thanks

  Read the article

• Domain Authentication from .NET Client over VPN

  - by Holy Christ

  I am writing a ClickOnce WPF app that will sometimes be used over VPN. The app uses resources available only to domain authenticated users. Some of the things include accessing SSRS Reports, accessing LDAP to lookup user information, hitting web services, etc. When a user logs in from a machine that is not authenticated on the domain, I need to somehow get his credentials, authenticate him on the domain, and store his credentials. What is the recommended approach for authenticating domain users over VPN? How can I securely store the credentials? I've found several articles but, not much posted recently and a lot of the solutions seem kinda hacky, or aren't very secure (ie - storing strings clear text in memory). It would be cool if I could use the ActiveDicrtoryMembershipProvider, but that seems to be geared for use in web apps. EDIT: The above is kind of a workaround. The user must enter their domain credentials to authenticate on the VPN. It would be ideal to access the credentials the user has already entered to login to the VPN instead of the WindowsIdentity.GetCurrent() (which returns the user logged into the computer). Any ideas on how that could work? We use Juniper Networks to connect to the VPN. Thanks!

  Read the article

• byte + byte = int... why?

  - by Robert C. Cartaino

  Looking at this C# code... byte x = 1; byte y = 2; byte z = x + y; // ERROR: Cannot implicitly convert type 'int' to 'byte' The result of any math performed on byte (or short) types is implicitly cast back to an integer. The solution is to explicitly cast the result back to a byte, so... byte z = (byte)(x + y); // works What I am wondering is why? Is it architectural? Philosophical? We have: int + int = int long + long = long float + float = float double + double = double So why not: byte + byte = byte short + short = short ? A bit of background: I am performing a long list of calculations on "small numbers" (i.e. < 8) and storing the intermediate results in a large array. Using a byte array (instead of an int array) is faster (because of cache hits). But the extensive byte-casts spread through the code make it that much more unreadable.

  Read the article

• return ArrayList from spring controller for ajax call and render in second dropdown

  - by user1708125

  I've a spring bean with 3 Maps all of which are to be populated incrementally. First map is an item category list, second map is a product list and third map is a hobby for item type list All the maps are mapped to and on the JSP. When the page is loaded only the first map is populated on the onchange event of first map, I need to populate the second map in the bean and similarly on the onchange event of second map, I need to populate the third map in the bean. Is there a way to do this using Ajax?? I need some code samples to how to render JSON response in second and third dropdown. Clarification: @Donal: I have a simple JSP page with 3 dropdowns corresponding to 3 maps stored in my commandBean. So when the page loads for the first time only the first map and hence the first dropdown is populated. Now whenever the user selects anything out of the first dropdown, I need to send the same commandbean back with the values of the first dropdown and get the values for the second map and hence the second dropdown and so forth for the 3rd dropdown as well. For each dropdown I 've got 3 maps and 3 variables for storing the selected values. Now I want to understand if this is possible using Ajax. I hope this clarifies whatever you need to know. Thanx

  Read the article

• How did My Object Get into ASP.NET Page State?

  - by Paul Knopf

  I know what this error is, how to fix it, etc. My question is that I don't know why my current page I am developing is throwing this error when I am not using the foo class directly in any way, nor am I setting anything to the viewstate. I am using postbacks alot, but like I said, I am not storing anything in the viewstate etc one integer. I am using nhibernate if that is relevant. Any idea why I need to mark this classes as serializable that arent being used? Where should I start investigating? [SerializationException: Type 'FlexiCommerce.Persistence.NH.ContentPersister' in Assembly 'FlexiCommerce.Persistence.NH, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' is not marked as serializable.] System.Runtime.Serialization.FormatterServices.InternalGetSerializableMembers(RuntimeType type) +9434541 System.Runtime.Serialization.FormatterServices.GetSerializableMembers(Type type, StreamingContext context) +247 System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitMemberInfo() +160 System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter, SerializationBinder binder) +218 System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Write(WriteObjectInfo objectInfo, NameInfo memberNameInfo, NameInfo typeNameInfo) +388 System.Runtime.Serialization.Formatters.Binary.ObjectWriter.Serialize(Object graph, Header[] inHeaders, __BinaryWriter serWriter, Boolean fCheck) +444 System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph, Header[] headers, Boolean fCheck) +133 System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Serialize(Stream serializationStream, Object graph) +13 System.Web.UI.ObjectStateFormatter.SerializeValue(SerializerBinaryWriter writer, Object value) +2937 [ArgumentException: Error serializing value 'Music#2' of type 'FlexiCommerce.Components.Category.'] System.Web.UI.ObjectStateFormatter.SerializeValue(SerializerBinaryWriter writer, Object value) +3252 System.Web.UI.ObjectStateFormatter.SerializeValue(SerializerBinaryWriter writer, Object value) +2276 [ArgumentException: Error serializing value 'System.Object[]' of type 'System.Object[].'] System.Web.UI.ObjectStateFormatter.SerializeValue(SerializerBinaryWriter writer, Object value) +3252 System.Web.UI.ObjectStateFormatter.Serialize(Stream outputStream, Object stateGraph) +116 System.Web.UI.ObjectStateFormatter.Serialize(Object stateGraph) +57 System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Serialize(Object state) +4 System.Web.UI.Util.SerializeWithAssert(IStateFormatter formatter, Object stateGraph) +37 System.Web.UI.HiddenFieldPageStatePersister.Save() +79 System.Web.UI.Page.SavePageStateToPersistenceMedium(Object state) +108 System.Web.UI.Page.SaveAllState() +315 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2492

  Read the article

• Loading data from file to Vector structure

  - by owca

  I'm trying to parse through fixed-width formatted file extracting x,y values of points from it, and then storing them in int[] array inside a Vector. Text file looks as follows : 0006 0015 0125 0047 0250 0131 That's the code : Vector<int[]> vc = new Vector<int[]>(); try { BufferedReader file = new BufferedReader(new FileReader("myfile.txt")); String s; int[] vec = new int[2]; while ((s = file.readLine()) != null) { vec[0] = Integer.parseInt(s.substring(0, 4).trim()); vec[1] = Integer.parseInt(s.substring(5, 8).trim()); vc.add(vec); } file.close(); } catch (IOException e) { } for(int i=0; i<vc.size(); i++){ for(int j=0; j<2; j++){ System.out.println(vc.elementAt(i)[j]); } } But the output shows only last line. 250 131 250 131 250 131 Should I somehow use Vector.nextElement() here to get all my data ?

  Read the article

• Programming texts and reference material for my Kindle DX, creating the ultimate reference device?

  - by mwilliams

  (Revisiting this topic with the release of the Kindle DX) Having owned both generation Kindle readers and now getting a Kindle DX; I'm very excited for true PDF handling on an e-ink device! An image of _Why's book on my Kindle (from my iPhone). This gives me a device capable of storing hundreds of thousands of pages that are full text search capable in the form factor of a magazine. What references (preferably PDF to preserve things such as code samples) would you recommend? Ultimately I would like reference material for every modern and applicable programming language (C, C++, Objective-C, Python, Ruby, Java, .NET (C#, Visual Basic, ASP.NET), Erlang, SQL references) as well as general programming texts and frameworks (algorithms, design patterns, theory, Rails, Django, Cocoa, ORMs, etc) and anything else that could be thought of. With so many developers here using such a wide array of languages, as a professional in your particular field, what books or references would you recommend to me for my Kindle? Creative Commons material a plus (translate that to free) as well as the material being in the PDF file format. File size is not an issue. If this turns out to be a success, I will update with a follow-up with a compiled list generated from all of the answers. Thanks for the assistance and contributing! UPDATE I have been using the Kindle DX a lot now for technical books. Check out this blog post I did for high resolution photos of different material: http://www.matthewdavidwilliams.com/2009/06/12/technical-document-pdfs-on-the-kindle-dx/

  Read the article

• How to store and locate multiple interface types within a Delphi TInterfaceList

  - by Brian Frost

  Hi, I'm storing small interfaces from a range of objects into a single TInterfaceList 'store' with the intention of offering list of specific interface types to the end user, so each interface will expose a 'GetName' function but all other methods are unique to that interface type. For example here are two interfaces: IBase = interface //---------------------------------------- function GetName : string; //---------------------------------------- end; IMeasureTemperature = interface(IBase) //------------------------------------ function MeasureTemperature : double; //---------------------------------------- end; IMeasureHumidity = interface(IBase) //---------------------------------------- function MeasureHumidity: double; //---------------------------------------- end; I put several of these interfaces into a single TInterfaceList and then I'd like to scan the list for a specific interface type (e.g. 'IMeasureTemperature') building another list of pointers to the objects exporting those interfaces. I wish to make no assumptions about the locations of those objects, some may export more than one type of interface. I know I could do this with a class hierarchy using something like: If FList[I] is TMeasureTemperature then .. but I'd like to do something simliar with an interface type, Is this possible?

  Read the article

• How do interpreters written in C and C++ bind identifiers to C(++) functions

  - by sub

  I'm talking about C and/or C++ here as this are the only languages I know used for interpreters where the following could be a problem: If we have an interpreted language X how can a library written for it add functions to the language which can then be called from within programs written in the language? PHP example: substr( $str, 5, 10 ); How is the function substr added to the "function pool" of PHP so it can be called from within scripts? It is easy for PHP storing all registered function names in an array and searching through it as a function is called in a script. However, as there obviously is no eval in C(++), how can the function then be called? I assume PHP doesn't have 100MB of code like: if( identifier == "substr" ) { return PHP_SUBSTR(...); } else if( ... ) { ... } Ha ha, that would be pretty funny. I hope you have understood my question so far. How do interpreters written in C/C++ solve this problem? How can I solve this for my own experimental toy interpreter written in C++?

  Read the article

• Forwarding HTTP Request with Direct Server Return

  - by Daniel Crabtree

  I have servers spread across several data centers, each storing different files. I want users to be able to access the files on all servers through a single domain and have the individual servers return the files directly to the users. The following shows a simple example: 1) The user's browser requests http://www.example.com/files/file1.zip 2) Request goes to server A, based on the DNS A record for example.com. 3) Server A analyzes the request and works out that /files/file1.zip is stored on server B. 4) Server A forwards the request to server B. 5) Server B returns file1.zip directly to the user without going through server A. Note: steps 4 and 5 must be transparent to the user and cannot involve sending a redirect to the user as that would violate the requirement of a single domain. From my research, what I want to achieve is called "Direct Server Return" and it is a common setup for load balancing. It is also sometimes called a half reverse proxy. For step 4, it sounds like I need to do MAC Address Translation and then pass the request back onto the network and for servers outside the network of server A tunneling will be required. For step 5, I simply need to configure server B, as per the real servers in a load balancing setup. Namely, server B should have server A's IP address on the loopback interface and it should not answer any ARP requests for that IP address. My problem is how to actually achieve step 4? I have found plenty of hardware and software that can do this for simple load balancing at layer 4, but these solutions fall short and cannot handle the kind of custom routing I require. It seems like I will need to roll my own solution. Ideally, I would like to do the routing / forwarding at the web server level, i.e. in PHP or C# / ASP.net. However, I am open to doing it at a lower level such as Apache or IIS, or at an even lower level, i.e. a custom proxy service in front of everything.

  Read the article

• Initializing AngularJS service factory style

  - by wisemanIV

  I have a service that retrieves data via REST. I want to store the resulting data in service level variable for use in multiple controllers. When I put all the REST logic directly into controllers everything works fine but when I attempt to move the retrieval / storing of data into a service the controller is not being updated when the data comes back. I've tried lots of different ways of maintain the binding between service and controller. Controller: myApp.controller('SiteConfigCtrl', ['$scope', '$rootScope', '$route', 'SiteConfigService', function ($scope, $rootScope, $route, SiteConfigService) { $scope.init = function() { console.log("SiteConfigCtrl init"); $scope.site = SiteConfigService.getConfig(); } } ]); Service: myApp.factory('SiteConfigService', ['$http', '$rootScope', '$timeout', 'RESTService', function ($http, $rootScope, $timeout, RESTService) { var siteConfig = {} ; RESTService.get("https://domain/incentiveconfig", function(data) { siteConfig = data; }); return { getConfig:function () { console.debug("SiteConfigService getConfig:"); console.debug(siteConfig); return siteConfig; } }; } ]);

  Read the article

• best practices question: How to save a collection of images and a java object in a single file? File

  - by Richard

  Hi all, I am making a java program that has a collection of flash-card like objects. I store the objects in a jtree composed of defaultmutabletreenodes. Each node has a user object attached to it with has a few string/native data type parameters. However, i also want each of these objects to have an image (typical formats, jpg, png etc). I would like to be able to store all of this information, including the images and the tree data to the disk in a single file so the file can be transferred between users and the entire tree, including the images and parameters for each object, can be reconstructed. I had not approached a problem like this before so I was not sure what the best practices were. I found XLMEncoder (http://java.sun.com/j2se/1.4.2/docs/api/java/beans/XMLEncoder.html) to be a very effective way of storing my tree and the native data type information. However I couldn't figure out how to save the image data itself inside of the XML file, and I'm not sure it is possible since the data is binary (so restricted characters would be invalid). My next thought was to associate a hash string instead of an image within each user object, and then gzip together all of the images, with the hash strings as the names and the XMLencoded tree in the same compmressed file. That seemed really contrived though. Does anyone know a good approach for this type of issue? THanks! Thanks!

  Read the article

• Syncing Data to Remote Services, Best Practices for Caching?

  - by viatropos

  I want to be able to publish events to Eventbrite, Eventful, and Google Calendar for my Google Apps. Each service has slightly different properties for events... I will be syncing many other things too, such as users with Google Contacts and MailChimp, Documents with Google Docs and some other services, etc... So I'm wondering, what is the recommended way of retrieving the data for the end user so that it's reasonably maintainable and optimized? Here are the things I'm thinking that I'm having trouble with: My App keeps a central database of all the models (Event, Document, User, Form, etc.), and whenever Admin creates an object (e.g. create through Eventbrite or through our Admin panel), we sync them and store a copy in our local database. When User goes to the site /events, App retrieves the events from the database. Read Events from a target feed, such as the Eventbrite or Eventful feed, and scrap the local database. Basically, I'm wondering, if we're storing all of the data on a remote service, do we really need to have a local database copy of the data? When would we need to have a local database, when wouldn't we?

  Read the article

• Where should global Application Settings be stored on Windows 7?

  - by Kerido

  Hi everybody, I'm working hard on making my product work seamlessly on Windows 7. The problem is that there is a small set of global (not user-specific) application settings that all users should be able to change. On previous versions I used HKLM\Software\__Company__\__Product__ for that purpose. This allowed Power Users and Administrators to modify the Registry Key and everything worked correctly. Now that Windows Vista and Windows 7 have this UAC feature, by default, even an Administrator cannot access the Key for writing without elevation. A stupid solution would, of course, mean adding requireAdministrator option into the application manifest. But this is really unprofessional since the product itself is extremely far from administration-related tasks. So I need to stay with asInvoker. Another solution could mean programmatic elevation during moments when write access to the Registry Key is required. Let alone the fact that I don't know how to implement that, it's pretty awkward also. It interferes with normal user experience so much that I would hardly consider it an option. What I know should be relatively easy to accomplish is adding write access to the specified Registry Key during installation. I created a separate question for that. This also very similar to accessing a shared file for storing the settings. My feeling is that there must be a way to accomplish what I need, in a way that is secure, straightforward and compatible with all OS'es. Any ideas?

  Read the article

• gcc compilations (sometimes) result in cpu underload

  - by confusedCoder

  I have a larger C++ program which starts out by reading thousands of small text files into memory and storing data in stl containers. This takes about a minute. Periodically, a compilation will exhibit behavior where that initial part of the program will run at about 22-23% CPU load. Once that step is over, it goes back to ~100% CPU. It is more likely to happen with O2 flag turned on but not consistently. It happens even less often with the -p flag which makes it almost impossible to profile. I did capture it once but the gprof output wasn't helpful - everything runs with the same relative speed just at low cpu usage. I am quite certain that this has nothing to do with multiple cores. I do have a quad-core cpu, and most of the code is multi-threaded, but I tested this issue running a single thread. Also, when I run the problematic step in multiple threads, each thread only runs at ~20% CPU. I apologize ahead of time for the vagueness of the question but I have run out of ideas as to how to troubleshoot it further, so any hints might be helpful. UPDATE: Just to make sure it's clear, the problematic part of the code does sometimes (~30-40% of the compilations) run at 100% CPU, so it's hard to buy the (otherwise reasonable) argument that I/O is the bottleneck

  Read the article

• Apache crashes, probably because of this piece of php code. Can you have a look?

  - by Munim

  I am working on the development of a web based application on codeigniter. I wrote this function to get the timezone data for any city or address. function gettimezone($address) { $_url = 'http://api.local.yahoo.com/MapsService/V1/geocode'; $_url .= sprintf('?appid=%s&location=%s',"phpclasses",rawurlencode($address)); $_result = false; if($_result = file_get_contents($_url)) { preg_match('!<Latitude>(.*)</Latitude><Longitude>(.*)</Longitude>!U', $_result, $_match); $lng = $_match[2]; $lat = $_match[1]; $url = "http://ws.geonames.org/timezone?lat={$lat}&lng={$lng}"; $timedata = file_get_contents($url); $sxml = simplexml_load_string($timedata); return $sxml->timezone; } else return false; } I am working on Windows 7 and xampp 1.7 (php 5.2.8). Is there any possible scenario where this piece of code would crash Apache? The application runs fine almost everytime, but I think running this piece of code when there is no internet connectivity or very poor internet connectivity (thereby no access to either of the webservices I have used) brings down the server. Something like this happened a few times and I think it was due to loss of internet connectivity but I am not sure what exactly is going on. [ By the way, feel free to use this piece of code. Makes 2 web service calls so don't use to too often in your application. Consider storing the results in a database.]

  Read the article

• PDF search on the iPhone

  - by pt2ph8

  After two days trying to read annotations from a PDF using Quartz, I've managed to do it and posted my code. Now I'd like to do the same for another frequently asked question: searching PDF documents with Quartz. Same situation as before, this question has been asked many times with almost no practical answers. So I need some pointers first, as I still haven't implemented this myself. What I tried: I tried using CGPDFScannerScan handling the TJ and Tj operators - returns the right text on some PDF, whereas on other documents it returns mostly random letters. Maybe it's related to text encoding? Someone pointed out that text blocks (marked by BT/ET operators) should be handled instead, but I still haven't managed to do so. Anyone managed to extract text from any PDF? After that, searching should be easy by storing all the text in a NSMutableString and using rangeOfString (if there's a better way please let me know). But then how to highlight the result? I know there are a few operators to find the glyph sizes, so I could calculate the resulting rect based on those values, but I've been reading the spec for hours... it's a bloated mess and I'm going insane. Anyone with a practical explanation? Thanks.

  Read the article

• Fast find object by string property

  - by Andrew Kalashnikov

  Hello, colleagues. I've got task to fast find object by its string property. Object: class DicDomain { public virtual string Id{ get; set; } public virtual string Name { get; set; } } For storing my object I use List[T] dictionary where T is DicDomain for now . I've got 5-10 such lists, which contain about 500-20000 at each one. Task is find objects by its Name. I use next code now: List<T> entities = dictionary.FindAll(s => s.Name.Equals(word, StringComparison.OrdinalIgnoreCase)); I've got some questions: Is my search speed optimal. I think now. Data structure. It List good for this task. What about hashtable,sorted... Method Find. May be i should use string intern?? I haven't much exp at these tasks. Can u give me good advice for increase perfomance. Thanks

  Read the article

• What prevents a user from adding controls to an ASP.NET page client side?

  - by Curtis White

  This goes back to my other question which I thought was sufficiently answers but upon reflect am not sure that it was (sorry). Backgrounder: I am generating a form dynamically. I am pulling from the database the controls. I must associate each control with a database ID which is not the user's session id. I do this currently by storing my ID in the ID for the web control with some other stuff to make it unique/clear what I am doing. On the post back, I iterate through all the controls on my web page checking for my special identifier, ie, MyGeneratedTextBox_ID_Unique. This process enables for 2 important steps, identifying the control was one I generated and also getting the ID for this input field. And, all of this works but I'm still concerned about the security of it. I do not see a security issue with showing the actual database ID's in this case, although agree it is not desirable. However, I am concerned of the following possibilities: If a user could add a nefarious control to my collection and use that for a SQL injection attack. More academic, but if a user could somehow store data for fields they do not have access too by changing the id's. I agree this is a "hack" of a way to do it. But my question is, is it a security risk and is there an 'easy' way to do it in a less hack way? I assume that only the controls that are created/instantiated on the page are added to the controls list.. thus all controls must be created server side and thus the security issue is address but just wanted to validate. Thanks again. PS: I could see adding a property for each control and encrypting the viewstate would be a little more secure.

  Read the article

• how to programatically compare permissions of login/user in sql server 2005

  - by titanium

  There's a login/user in SQL Server who is having a problem importing accounts in production server. I don't have an idea what method he is doing this. According to the one importing, this import is working fine in development server. But when he did the same import in production it is giving him errors. Below are the errors he is getting for each accounts. 2009-06-05 18:01:05.8254 ERROR [engine-1038] Task [1038:00001 - Members]: Step 1.0 [<Insert step description>]: Task.RunStep(): StoreRow has failed 2009-06-05 18:01:05.9035 ERROR [engine-1038] Task [1038:00001 - Members]: Step 1.0 [<Insert step description>]: Task.RunStep(): StoreRow exception: Exception caught while storing Data. [Microsoft][ODBC SQL Server Driver][SQL Server]'ACCOUNT1' is not a valid login or you do not have permission. Please note that 'ACCOUNT1' is not the real account name. I just changed it for security reason. Using SQL Server Management Studio (SSMS), I viewed/checked the permissions of the user/login who is performing the import from development server and production for comparison. I found no difference. My question is: Is there a way to programmatically query permissions in server and database level of a particular login/user so I can compare/contrast for any differences?

  Read the article

• Updating a Database from DataBound Controls

  - by Avatar_Squadron

  Hi. I'm currently creating a WinForm in VB.NET bound to an access database. Basically what i have are two forms: one is a search form used to search the database, and the other is a details form. You run a search on the searchForm and it returns a list of Primary Keys and a few other identifying values. You then double click on the entry you want to view, and it loads the details form. The Details form has a collection of databound controls to display the data: mostly text boxes and checkboxs. The way i've set it up is i used the UI to build the form and then set the DataBindings Property of each control to "TblPropertiesBindingSource - " where value name is one of the values in the table (such as PropertyID or HasWoodFloor). Then, when you double click an entry in the searchform, I handle the event by parsing the Primary Key (PropertyID) out of the selected row and then storing this to the details form: Note: Detail is the details form that is opened to display the info Private Sub propView_CellDoubleClick(ByVal sender As Object, ByVal e As System.Windows.Forms.DataGridViewCellEventArgs) Handles propView.CellDoubleClick Dim detail As frmPropertiesDetail = New frmPropertiesDetail detail.id = propView.Rows(e.RowIndex).Cells(0).Value detail.Show() End Sub Then, upon loading the details form, it set's the filter on the BindSource as such: TblPropertiesBindingSource.Filter() = "PropertyID=" & id This works great so far. All the controls on the details form will display the correct info. The problem is updating changes. Scenario: If i have the user load the details for say, property 10001, it will show a description in a textBox named descriptionBox which is identical to the value of the description value of for that entry in the database. I want the user to then be able to change the text of the text box (which they can currently do) and click the save button (saveBut) and have the form update all the values in the controls to the database. Theorectically, it should do this as the controls are DataBound, thus i can avoid writing code that tells each entry in the database row to take the value of the aligned control. I've tried calleding PropertiesTableAdapter.Update(PropertiesBindingSource.DataSource), but that doesnt seem to do it.

  Read the article

• Processing a database queue across multiple threads - design advice

  - by rwmnau

  I have a SQL Server table full of orders that my program needs to "follow up" on (call a webservice to see if something has been done with them). My application is multi-threaded, and could have instances running on multiple servers. Currently, every so often (on a Threading timer), the process selects 100 rows, at random (ORDER BY NEWID()), from the list of "unconfirmed" orders and checks them, marking off any that come back successfully. The problem is that there's a lot of overlap between the threads, and between the different processes, and their's no guarantee that a new order will get checked any time soon. Also, some orders will never be "confirmed" and are dead, which means that they get in the way of orders that need to be confirmed, slowing the process down if I keep selecting them over and over. What I'd prefer is that all outstanding orders get checked, systematically. I can think of two easy ways do this: The application fetches one order to check at a time, passing in the last order it checked as a parameter, and SQL Server hands back the next order that's unconfirmed. More database calls, but this ensures that every order is checked in a reasonable timeframe. However, different servers may re-check the same order in succession, needlessly. The SQL Server keeps track of the last order it asked a process to check up on, maybe in a table, and gives a unique order to every request, incrementing its counter. This involves storing the last order somewhere in SQL, which I wanted to avoid, but it also ensures that threads won't needlessly check the same orders at the same time Are there any other ideas I'm missing? Does this even make sense? Let me know if I need some clarification.

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >