Search Results

Search found 8770 results on 351 pages for 'sun zfs storage 7000 appl'.

Page 93/351 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

  • Creating a NAS Box with an Existing System

    <B>Linux Magazine:</B> "Standalone Network Attached Storage (NAS) servers provide file level storage to heterogeneous clients, enabling shared storage. This article presents the basics of NAS units (NFS servers) and how you can create one from an existing system"

    Read the article

  • Adding an existing Control Domain to a Server Pool

    - by Owen Allen
    I got a question about LDoms: "Is it possible to move a Control Domain built through Ops Center with pre-existing LDoms into a server pool? If so, do I need to delete and recreate anything?" Yes, you can do this. You have to stop the LDom guests, and then you can add the CDom to a Server Pool. If the guests are using shared storage, you should be able to bring them up in the Server Pool. If the guests are not on shared storage, you can use the Migrate Storage option to bring their storage in.

    Read the article

  • Adding a short delay between bullets

    - by Sun
    I'm having some trouble simulating bullets in my 2D shooter. I want similar mechanics to Megaman, where the user can hold down the shoot button and a continues stream of bullets are fired but with a slight delay. Currently, when the user fires a bullet in my game a get an almost laser like effect. Below is a screen shot of some bullets being fired while running and jumping. In my update method I have the following: if(gc.getInput().isKeyDown(Input.KEY_SPACE) ){ bullets.add(new Bullet(player.getPos().getX() + 30,player.getPos().getY() + 17)); } Then I simply iterate through the array list increasing its x value on each update. Moreover, pressing the shoot button (Space bar) creates multiple bullets instead of just creating one even though I am adding only one new bullet to my array list. What would be the best way to solve this problem?

    Read the article

  • Pillar Axiom OpenWorld Highlights

    - by uwes
    During the Storage General Session at Oracle OpenWorld Conference 2012 in San Francisco, the following Axiom-related announcements were made: Oracle Platinum Services for Axiom 600: Extending Oracle's Platinum Services to Axiom 600 as a standalone product –  the same level of service and support you get with Exadata – 24/7 fault monitoring, dedicated response and escalation management to meet enterprise-grade SLA’s, patch planning and management. Oracle Enterprise Manager Axiom Plug-in: Allowing DBA's to manage, maintain, monitor and provision the Axiom 600 storage system from Oracle EM. Oracle Virtual Machine Axiom Plug-in: Allowing Oracle VM and System Administrators to manage, maintain, monitor and provision the Axiom 600 storage system from Oracle VM using Storage Connect. Oracle Axiom Data Protection Manager 3.1: Leveraging Axiom's Copy Services, System Administrators can automatically create Application Consistent Clones of critical Windows and Oracle DataBase environments for quick recovery. For More Information Go To: Oracle.com Pillar Axiom Page Oracle Technology Network SAN Page

    Read the article

  • How can I make the storage of C++ lambda objects more efficient?

    - by Peter Ruderman
    I've been thinking about storing C++ lambda's lately. The standard advice you see on the Internet is to store the lambda in a std::function object. However, none of this advice ever considers the storage implications. It occurred to me that there must be some seriously black voodoo going on behind the scenes to make this work. Consider the following class that stores an integer value: class Simple { public: Simple( int value ) { puts( "Constructing simple!" ); this->value = value; } Simple( const Simple& rhs ) { puts( "Copying simple!" ); this->value = rhs.value; } Simple( Simple&& rhs ) { puts( "Moving simple!" ); this->value = rhs.value; } ~Simple() { puts( "Destroying simple!" ); } int Get() const { return this->value; } private: int value; }; Now, consider this simple program: int main() { Simple test( 5 ); std::function<int ()> f = [test] () { return test.Get(); }; printf( "%d\n", f() ); } This is the output I would hope to see from this program: Constructing simple! Copying simple! Moving simple! Destroying simple! 5 Destroying simple! Destroying simple! First, we create the value test. We create a local copy on the stack for the temporary lambda object. We then move the temporary lambda object into memory allocated by std::function. We destroy the temporary lambda. We print our output. We destroy the std::function. And finally, we destroy the test object. Needless to say, this is not what I see. When I compile this on Visual C++ 2010 (release or debug mode), I get this output: Constructing simple! Copying simple! Copying simple! Copying simple! Copying simple! Destroying simple! Destroying simple! Destroying simple! 5 Destroying simple! Destroying simple! Holy crap that's inefficient! Not only did the compiler fail to use my move constructor, but it generated and destroyed two apparently superfluous copies of the lambda during the assignment. So, here finally are the questions: (1) Is all this copying really necessary? (2) Is there some way to coerce the compiler into generating better code? Thanks for reading!

    Read the article

  • Exiting a reboot loop

    - by user12617035
    If you're in a situation where the system is panic'ing during boot, you can use # boot net -s to regain control of your system. In my case, I'd added some diagnostic code to a (PCI) driver (that is used to boot the root filesystem). There was a bug in the driver, and each time during boot, the bug occurred, and so caused the system to panic: ... 000000000180b950 genunix:vfs_mountroot+60 (800, 200, 0, 185d400, 1883000, 18aec00) %l0-3: 0000000000001770 0000000000000640 0000000001814000 00000000000008fc %l4-7: 0000000001833c00 00000000018b1000 0000000000000600 0000000000000200 000000000180ba10 genunix:main+98 (18141a0, 1013800, 18362c0, 18ab800, 180e000, 1814000) %l0-3: 0000000070002000 0000000000000001 000000000180c000 000000000180e000 %l4-7: 0000000000000001 0000000001074800 0000000000000060 0000000000000000 skipping system dump - no dump device configured rebooting... If you're logged in via the console, you can send a BREAK sequence in order to gain control of the firmware's (OBP's) prompt. Enter Ctrl-Shift-[ in order to get the TELNET prompt. Once telnet has control, enter this: telnet> send brk You'll be presented with OBP's prompt: ok You then enter the following in order to boot into single-user mode via the network: ok boot net -s Note that booting from the network under Solaris will implicitly cause the system to be INSTALLED with whatever software had last been configured to be installed. However, we are using boot net -s as a "handle" with which to get at the Solaris prompt. Once at that prompt, we can perform actions as root that will let us back out our buggy driver (ok... MY buggy driver :-)) ...and replace it with the original, non-buggy driver. Entering the boot command caused the following output, as well as left us at the Solaris prompt (in single-user-mode): Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #53463393. Ethernet address 0:3:ba:2f:c9:61, Host ID: 832fc961. Rebooting with command: boot net -s Boot device: /pci@1f,700000/network@2 File and args: -s 1000 Mbps FDX Link up Timeout waiting for ARP/RARP packet Timeout waiting for ARP/RARP packet 4000 1000 Mbps FDX Link up Requesting Internet address for 0:3:ba:2f:c9:61 SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Booting to milestone "milestone/single-user:default". Configuring devices. Using RPC Bootparams for network configuration information. Attempting to configure interface bge0... Configured interface bge0 Requesting System Maintenance Mode SINGLE USER MODE # Our goal is to now move to the directory containing the buggy driver and replace it with the original driver (that we had saved away before ever loading our buggy driver! :-) However, since we booted from the network, the root filesystem ("/") is NOT mounted on one of our local disks. It is mounted on an NFS filesystem exported by our install server. To verify this, enter the following command: # mount | head -1 / on my-server:/export/install/media/s10u2/solarisdvd.s10s_u2dvd/latest/Solaris_10/Tools/Boot remote/read/write/setuid/devices/dev=4ac0001 on Wed Dec 31 16:00:00 1969 As a result, we have to create a temporary mount point and then mount the local disk onto that mount point: # mkdir /tmp/mnt # mount /dev/dsk/c0t0d0s0 /tmp/mnt Note that your system will not necessarily have had its root filesystem on "c0t0d0s0". This is something that you should also have recorded before you ever loaded your.. er... "my" buggy driver! :-) One can find the local disk mounted under the root filesystem by entering: # df -k / Filesystem kbytes used avail capacity Mounted on /dev/dsk/c0t0d0s0 76703839 4035535 71901266 6% / To continue with our example, we can now move to the directory of buggy-driver in order to replace it with the original driver. Note that /tmp/mnt is prefixed to the path of where we'd "normally" find the driver: # cd /tmp/mnt/platform/sun4u/kernel/drv/sparcv9 # ls -l pci\* -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch -rw-r--r-- 1 root root 288504 Dec 6 15:38 pcisch.aar -rwxr-xr-x 1 root sys 211616 Jun 8 2006 pcisch.orig # cp -p pcisch.orig pcisch We can now synchronize any in-memory filesystem data structures with those on disk... and then reboot. The system will then boot correctly... as expected: # sync;sync # reboot syncing file systems... done Sun Blade 1500, No Keyboard Copyright 1998-2004 Sun Microsystems, Inc. All rights reserved. OpenBoot 4.16.4, 1024 MB memory installed, Serial #xxxxxxxx. Ethernet address 0:3:ba:2f:c9:61, Host ID: yyyyyyyy. Rebooting with command: boot Boot device: /pci@1e,600000/ide@d/disk@0,0:a File and args: SunOS Release 5.10 Version Generic_118833-17 64-bit Copyright 1983-2005 Sun Microsystems, Inc. All rights reserved. Use is subject to license terms. Hostname: my-host NIS domain name is my-campus.Central.Sun.COM my-host console login: ...so that's how it's done! Of course, the easier way is to never write a buggy-driver... but.. then.. we all "have an eraser on the end of each of our pencils"... don't we ? :-) "...thank you... and good night..."

    Read the article

  • How to offset particles from point of origin

    - by Sun
    Hi I'm having troubles off setting particles from a point of origin. I want my particles to spread out after a certain radius from a the point of origin. For example, this is what I have right now: All particles emitted from a point of origin. What I want is this: Particles are offset from the point of origin by some amount, i.e after the circle. What is the best way to achieve this? At the moment, I have the point of origin, the position of each particle and its rotation angle. Sorry for the poor illustrations. Edit: I was mistaken, when a particle is created, I have only the point of origin. When the particle is created I am able to calculate the rotation of the particle in the update method after it has moved to a new location using atan2() method. This is how I create/manage particles: Created new particle at enemy ship death location, for every new particle which is added to the list, call Update and Draw to update its position, calculate new angle and draw it.

    Read the article

  • Simulating a sine wave/oscillating pattern for enemies

    - by Sun
    I'm creating a simple top down shooter, right now I have an enemy which simply follows the player. I'd like to change things up and have the enemies move towards the player but in a wave like motion. I have looked at some similar questions like this but they don't take into account for the Y changing. How can I simulate a wave like pattern for my enemies whilst they are homing into their target. Edit: Sample code In my update method I have the following: Vector2 trackingPos = position - target; trackingPos.Normalize(); position -= trackingPos * elaspedTime * speed;

    Read the article

  • Come See Us Next Week at VMworld 2014

    - by Larry Wake
    If you're at VMworld 2014 next week in San Francisco, come drop by booth 205.  We'll have folks from both the Oracle Solaris and Oracle ZFS Storage teams, so you can learn a lot more about what's new in Oracle Solaris 11.2, plus what the storage team has been up to, as they unleash their "it's perfect for virtualization" architecture, with a series of new VMware API integrations, that crushes both the other big-name storage vendors and the all-flash start-ups.

    Read the article

  • facescontext.getcurrentinstance returns nullpointerexception

    - by mvg
    I am creating a Spring based JSF application, where I am getting FacesContext.getCurrentInstance which returns null. Here is my Java code public static ServletContext getServletContext() { return (ServletContext) FacesContext.getCurrentInstance() .getExternalContext().getContext(); } This is the stack trace of my error SEVERE: Exception sending context initialized event to listener instance of class org.springframework.beans.factory.BeanCreationException: Error creating bean with name 'dbSettingsServiceTarget' defined in ServletContext resource [/WEB-INF/applicationContext.xml]: Instantiation of bean failed; nested exception is org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.baytalkitec.smartcall.service.impl.DbSettingsServiceImpl]: Constructor threw exception; nested exception is java.lang.NullPointerException at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:883) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBeanInstance(AbstractAutowireCapableBeanFactory.java:839) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:440) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$1.run(AbstractAutowireCapableBeanFactory.java:409) at java.security.AccessController.doPrivileged(Native Method) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380) at org.springframework.beans.factory.support.AbstractBeanFactory$1.getObject(AbstractBeanFactory.java:264) at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:221) at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185) at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164) at org.springframework.beans.factory.support.DefaultListableBeanFactory.preInstantiateSingletons(DefaultListableBeanFactory.java:429) at org.springframework.context.support.AbstractApplicationContext.finishBeanFactoryInitialization(AbstractApplicationContext.java:729) at org.springframework.context.support.AbstractApplicationContext.refresh(AbstractApplicationContext.java:381) at org.springframework.web.context.ContextLoader.createWebApplicationContext(ContextLoader.java:255) at org.springframework.web.context.ContextLoader.initWebApplicationContext(ContextLoader.java:199) at org.springframework.web.context.ContextLoaderListener.contextInitialized(ContextLoaderListener.java:45) at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:3972) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4467) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardHost.start(StandardHost.java:785) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1045) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443) at org.apache.catalina.core.StandardService.start(StandardService.java:519) at org.apache.catalina.core.StandardServer.start(StandardServer.java:710) at org.apache.catalina.startup.Catalina.start(Catalina.java:581) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:414) Caused by: org.springframework.beans.BeanInstantiationException: Could not instantiate bean class [com.baytalkitec.smartcall.service.impl.DbSettingsServiceImpl]: Constructor threw exception; nested exception is java.lang.NullPointerException at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:115) at org.springframework.beans.factory.support.SimpleInstantiationStrategy.instantiate(SimpleInstantiationStrategy.java:61) at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.instantiateBean(AbstractAutowireCapableBeanFactory.java:877) ... 31 more Caused by: java.lang.NullPointerException at com.smartcall.util.FacesUtil.getServletContext(FacesUtil.java:21) at com.smartcall.util.SpringApplicationContextUtil.init(SpringApplicationContextUtil.java:21) at com.smartcall.util.SpringApplicationContextUtil.<init>(SpringApplicationContextUtil.java:16) at com.smartcall.service.impl.DbSettingsServiceImpl.init(DbSettingsServiceImpl.java:17) at com.smartcall.service.impl.DbSettingsServiceImpl.<init>(DbSettingsServiceImpl.java:12) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:513) at org.springframework.beans.BeanUtils.instantiateClass(BeanUtils.java:100) ... 33 more and hence due to this error Server console in Eclipse reports that application failed to startup due to previous errors My web.xml file <?xml version="1.0" encoding="UTF-8"?> <web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd" id="WebApp_ID" version="2.5"> <display-name>smartcall2.0</display-name> <context-param> <param-name>javax.faces.STATE_SAVING_METHOD</param-name> <param-value>server</param-value> </context-param> <context-param> <param-name>javax.faces.CONFIG_FILES</param-name> <param-value> /WEB-INF/faces-config.xml,/WEB-INF/faces-managed-bean.xml,/WEB-INF/faces-navigation.xml </param-value> </context-param> <listener> <listener-class> com.sun.faces.config.ConfigureListener </listener-class> </listener> <listener> <listener-class> org.springframework.web.context.ContextLoaderListener </listener-class> </listener> <filter> <display-name>RichFaces Filter</display-name> <filter-name>richfaces</filter-name> <filter-class>org.ajax4jsf.Filter</filter-class> </filter> <filter-mapping> <filter-name>richfaces</filter-name> <servlet-name>Faces Servlet</servlet-name> <dispatcher>REQUEST</dispatcher> <dispatcher>FORWARD</dispatcher> <dispatcher>INCLUDE</dispatcher> </filter-mapping> <servlet> <servlet-name>Faces Servlet</servlet-name> <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> <context-param> <param-name>javax.faces.DEFAULT_SUFFIX</param-name> <param-value>.xhtml</param-value> </context-param> <servlet-mapping> <servlet-name>Faces Servlet</servlet-name> <url-pattern>*.jsf</url-pattern> </servlet-mapping> <session-config> <session-timeout>180</session-timeout> </session-config> <welcome-file-list> <welcome-file>index.html</welcome-file> <welcome-file>index.htm</welcome-file> <welcome-file>index.jsp</welcome-file> <welcome-file>default.html</welcome-file> <welcome-file>default.htm</welcome-file> <welcome-file>default.jsp</welcome-file> </welcome-file-list> I am not clear whether this error belongs to Spring or JSF or Eclipse. I am using Eclipse Galileo, JSF 1.2,Spring 3 Please help Thanks in advance

    Read the article

  • Why does File.Exists return false?

    - by Jonas Stawski
    I'm querying all images on the Android device as such: string[] columns = { MediaStore.Images.Media.InterfaceConsts.Data, MediaStore.Images.Media.InterfaceConsts.Id }; string orderBy = MediaStore.Images.Media.InterfaceConsts.Id; var imagecursor = ManagedQuery(MediaStore.Images.Media.ExternalContentUri, columns, null, null, orderBy); for (int i = 0; i < this.Count; i++) { imagecursor.MoveToPosition(i); Paths[i]= imagecursor.GetString(dataColumnIndex); Console.WriteLine(Paths[i]); Console.WriteLine(System.IO.File.Exists(Paths[i])); } The problem is that the output shows that some files don't exist. Here's a sample output: /storage/sdcard0/Download/On-Yom-Kippur-Jews-choose-different-shoes-VSETQJ6-x-large.jpg False /storage/sdcard0/Download/397277_10151250943161341_876027377_n.jpg False /storage/sdcard0/Download/Roxy_Cottontail_&_Melo-X_Present..._Some_Bunny_Love's_You.jpg False /storage/sdcard0/Download/album-The-Rolling-Stones-Some-Girls.jpg True /storage/sdcard0/Download/some-people-ust-dont-appreciate-fashion[1].jpg True /storage/sdcard0/Download/express.gif True ... /storage/sdcard0/Download/some-joys-are-expressed-better-in-silence.JPG False How is this possible? I downloaded these images myself from the internet! They should exist in disk.

    Read the article

  • How do I search the MediaStore for a specific directory instead of entire external storage?

    - by Nick Lopez
    In my app I have an option that allows users to browse for audio files on their phone to add to the app. I am having trouble however with creating a faster way of processing the query code. Currently it searches the entire external storage and causes the phone to prompt a force close/wait warning. I would like to take the code I have posted below and make it more efficient by either searching in a specific folder on the phone or by streamlining the process to make the file search quicker. I am not sure how to do this however. Thanks! public class BrowseActivity extends DashboardActivity implements OnClickListener, OnItemClickListener { private List<Sound> soundsInDevice = new ArrayList<Sound>(); private List<Sound> checkedList; private ListView browsedList; private BrowserSoundAdapter adapter; private long categoryId; private Category category; private String currentCategoryName; private String description; // private Category newCategory ; private Button doneButton; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); requestWindowFeature(Window.FEATURE_NO_TITLE); setContentView(R.layout.activity_browse); checkedList = new ArrayList<Sound>(); browsedList = (ListView) findViewById(android.R.id.list); doneButton = (Button) findViewById(R.id.doneButton); soundsInDevice = getMediaSounds(); if (soundsInDevice.size() > 0) { adapter = new BrowserSoundAdapter(this, R.id.browseSoundName, soundsInDevice); } else { Toast.makeText(getApplicationContext(), getString(R.string.no_sounds_available), Toast.LENGTH_SHORT) .show(); } browsedList.setAdapter(adapter); browsedList.setOnItemClickListener(this); doneButton.setOnClickListener(this); } private List<Sound> getMediaSounds() { List<Sound> mediaSoundList = new ArrayList<Sound>(); ContentResolver cr = getContentResolver(); String[] projection = {MediaStore.Audio.Media._ID, MediaStore.Audio.Media.DISPLAY_NAME, MediaStore.Audio.Media.TITLE, MediaStore.Audio.Media.DATA, MediaStore.Audio.Media.DURATION}; final Uri uri = MediaStore.Audio.Media.EXTERNAL_CONTENT_URI; Log.v("MediaStore.Audio.Media.EXTERNAL_CONTENT_URI", "" + uri); final Cursor cursor = cr.query(uri, projection, null, null, null); int n = cursor.getCount(); Log.v("count", "" + n); if (cursor.moveToFirst()) { do { String soundName = cursor .getString(cursor .getColumnIndexOrThrow(MediaStore.Audio.Media.DISPLAY_NAME)); Log.v("soundName", "" + soundName); String title = cursor .getString(cursor .getColumnIndexOrThrow(MediaStore.Audio.Media.TITLE)); Log.v("title", "" + title); String path = cursor.getString(cursor .getColumnIndexOrThrow(MediaStore.Audio.Media.DATA)); Log.v("path", "" + path); Sound browsedSound = new Sound(title, path, false, false, false, false, 0); Log.v("browsedSound", "" + browsedSound); mediaSoundList.add(browsedSound); Log.v("mediaSoundList", "" + mediaSoundList.toString()); } while (cursor.moveToNext()); } return mediaSoundList; } public class BrowserSoundAdapter extends ArrayAdapter<Sound> { public BrowserSoundAdapter(Context context, int textViewResourceId, List<Sound> objects) { super(context, textViewResourceId, objects); } @Override public View getView(final int position, View convertView, ViewGroup parent) { ViewHolder viewHolder; View view = convertView; LayoutInflater inflater = getLayoutInflater(); if (view == null) { view = inflater.inflate(R.layout.list_item_browse, null); viewHolder = new ViewHolder(); viewHolder.soundNameTextView = (TextView) view .findViewById(R.id.browseSoundName); viewHolder.pathTextView = (TextView) view .findViewById(R.id.browseSoundPath); viewHolder.checkToAddSound = (CheckBox) view .findViewById(R.id.browse_checkbox); view.setTag(viewHolder); } else { viewHolder = (ViewHolder) view.getTag(); } final Sound sound = soundsInDevice.get(position); if (sound.isCheckedState()) { viewHolder.checkToAddSound.setChecked(true); } else { viewHolder.checkToAddSound.setChecked(false); } viewHolder.soundNameTextView.setText(sound.getName()); viewHolder.pathTextView.setText(sound.getUri()); viewHolder.checkToAddSound .setOnClickListener(new OnClickListener() { @Override public void onClick(View v) { CheckBox cb = (CheckBox) v .findViewById(R.id.browse_checkbox); boolean checked = cb.isChecked(); boolean newValue = checked; updateView(position, newValue); doneButtonStatus(checkedList.size()); } }); return view; } } // Adapter view holder class private class ViewHolder { private TextView soundNameTextView; private TextView pathTextView; private CheckBox checkToAddSound; } // done button On Click @Override public void onClick(View view) { boolean status = getIntent().getBooleanExtra("FromAddCat", false); Log.v("for add category","enters in if"); if(status){ Log.v("for add category","enters in if1"); currentCategoryName = getIntent().getStringExtra("categoryName"); description = getIntent().getStringExtra("description"); boolean existCategory = SQLiteHelper.getCategoryStatus(currentCategoryName); if (!existCategory) { category = new Category(currentCategoryName, description, false); category.insert(); category.update(); Log.v("for add category","enters in if2"); } }else{ categoryId = getIntent().getLongExtra("categoryId",-1); category = SQLiteHelper.getCategory(categoryId); } for (Sound checkedsound : checkedList) { checkedsound.setCheckedState(false); checkedsound.insert(); category.getSounds().add(checkedsound); final Intent intent = new Intent(this, CategoriesActivity.class); finish(); startActivity(intent); } } @Override public void onItemClick(AdapterView<?> arg0, View view, int position, long arg3) { boolean checked = true; boolean newValue = false; CheckBox cb = (CheckBox) view.findViewById(R.id.browse_checkbox); if (cb.isChecked()) { cb.setChecked(!checked); newValue = !checked; } else { cb.setChecked(checked); newValue = checked; } updateView(position, newValue); doneButtonStatus(checkedList.size()); } private void doneButtonStatus(int size) { if (size > 0) { doneButton.setEnabled(true); doneButton.setBackgroundResource(R.drawable.done_button_drawable); } else { doneButton.setEnabled(false); doneButton.setBackgroundResource(R.drawable.done_btn_disabled); } } private void updateView(int index, boolean newValue) { System.out.println(newValue); Sound sound = soundsInDevice.get(index); if (newValue == true) { checkedList.add(sound); sound.setCheckedState(newValue); } else { checkedList.remove(sound); sound.setCheckedState(newValue); } } }

    Read the article

  • AIX Grid Control 10.2.0.5 Communication and Monitoring Issue since 31-DEC-2010

    - by jayatheertha.rao(at)oracle.com
    Detailed symptoms for Oracle Management Server (OMS) 10.2.0.5 on AIX Oracle Management Service 10.2.0.5 instances on AIX 5L remain active and functional, but the OMS instances fail to communicate with the Grid Control Management Agents.An SSLPeerUnverified exception will be reported in the file $ORACLE_HOME/sysman/log/emoms.trc when OMS attempts to connect with an Agent:Javax.net.ssl.SSLPeerUnverifiedException: peer not authenticatedat com.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificateChain(DashoA12275)at oracle.sysman.emSDK.emd.comm.EMDClient.authenticateHTTPConnection(EMDClient.java:2002)at oracle.sysman.emSDK.emd.comm.EMDClient.getConnection(EMDClient.java:1877)at oracle.sysman.emSDK.emd.comm.EMDClient.getConnection(EMDClient.java:1810)at oracle.sysman.emSDK.emd.comm.EMDClient.verifyHttpConnection(EMDClient.java:2540)at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:2323)at oracle.sysman.emSDK.emd.comm.EMDClient.getUploadManagerStatus(EMDClient.java:4853)at oracle.sysman.eml.admin.rep.emdConfig.EmdConfigTargetsData.getEmdUploadData(EmdConfigTargetsData.java:1640)at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)This error may be reported when:- Accessing the Agent home page in Grid Control- Setting preferred credentials for a target monitored by the Agent- Managing metrics for a target monitored by the Agent The jobs scheduled to be run by Agents can become non-responsiveThe OMS log file $ORACLE_HOME/sysman/log/emoms.trc can show:2010-12-31 00:06:58,204 [JobWorker 430:Thread-34] DEBUG emSDK.comm getStreamResponse.4015 - oracle.sysman.emSDK.emd.comm.CommException: java.io.IOException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticatedoracle.sysman.emSDK.emd.comm.CommException: java.io.IOException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticatedat oracle.sysman.emSDK.emd.comm.EMDClient.getStreamResponse_(EMDClient.java:4088)at oracle.sysman.emSDK.emd.comm.EMDClient.getStreamResponse(EMDClient.java:4009)at oracle.sysman.emSDK.emd.comm.EMDClient.remoteOperation(EMDClient.java:3404)at oracle.sysman.emdrep.jobs.CommandManager.requestRemoteCommand(CommandManager.java:765)at oracle.sysman.emdrep.jobs.commands.RemoteOp.executeCommand(RemoteOp.java:434)at oracle.sysman.emdrep.jobs.commands.RemoteOp.executeCommand(RemoteOp.java:491)at oracle.sysman.emdrep.jobs.BaseJobWorker.runStep(BaseJobWorker.java:614)at oracle.sysman.emdrep.jobs.BaseJobWorker.doOneOperation(BaseJobWorker.java:738)at oracle.sysman.emdrep.jobs.JobWorker.doOneOperation(JobWorker.java:306)at oracle.sysman.emdrep.jobs.JobWorker.run(JobWorker.java:288)at oracle.sysman.util.threadPoolManager.WorkerThread.run(Worker.java:261) Detailed symptoms for Grid Control Management Agent 10.2.0.5 on AIX Beginning 31-DEC-2010 00:00:00, 10.2.0.5 Management Agents running on the AIX 5L operating system will fail to monitor Oracle Application Server targets. As a result, the Availability Status for the Oracle Application Server targets will be in the "Metric Error" state. NOTE: The 10.2.0.5.0 Agents would experience these errors regardless of the version/platform of the OMS.The following metric error is seen in the console for the Oracle Application Server targets monitored by a Grid Control Management Agent 10.2.0.5 installed on AIX and experiencing a Root Certificate Authority issue:Message oracle.sysman.emSDK.emd.fetchlet.FetchletException: oracle.sysman.emSDK.emd.fetchlet.FetchletException: oracle.sysman.emSDK.emd.fetchlet.FetchletException: oracle.sysman.emSDK.emd.comm.CommException: java.io.IOException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticated The Grid Control Management Agent log file $ORACLE_HOME/sysman/log/emagentfetchlet.log (or $ORACLE_HOME/hostname/sysman/log/emagentfetchlet.log for a clustered Agent) includes the following errors:2010-12-31 00:01:03,626 [nmefmgr_getJNIFetchlet] ERROR ias.ResponseMetric getResponseMetric.154 - Unable tocompute application server statusoracle.sysman.emSDK.emd.fetchlet.FetchletException: oracle.sysman.emSDK.emd.comm.CommException: java.io.IOException: javax.net.ssl.SSLPeerUnverifiedException: peer not authenticatedat oracle.sysman.ias.ias.ResponseMetric.getResponseMetric(ResponseMetric.java:108)at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)at java.lang.reflect.Method.invoke(Method.java:618)at oracle.sysman.emd.fetchlets.JavaWrapperFetchlet.getMetric(JavaWrapperFetchlet.java:217)at oracle.sysman.emd.fetchlets.FetchletWrapper.getMetric(FetchletWrapper.java:382) Beginning 31-DEC-2010, 10.2.0.5 Management Agents on the AIX 5L platform will fail to secure or re-secure with Oracle Management Service (OMS). This failure will cause installation of 10.2.0.5 Agents on the AIX 5L platform to fail.NOTE: The 10.2.0.5.0 Agents would experience these errors regardless of the version/platform of the OMS.The "emctl secure agent" command will fail with the following error, which will be written to the $ORACLE_HOME/sysman/log/secure.log file (or $ORACLE_HOME/hostname/sysman/log/secure.log for a clustered Agent) :2011-01-03 21:06:11,941 [main] ERROR agent.SecureAgentCmd main.207 - Failedto secure the Agent:javax.net.ssl.SSLPeerUnverifiedException: peer not authenticatedatcom.sun.net.ssl.internal.ssl.SSLSessionImpl.getPeerCertificateChain(DashoA6275)atoracle.sysman.emctl.secure.agent.SecureAgentCmd.checkUpload(SecureAgentCmd.java:478)atoracle.sysman.emctl.secure.agent.SecureAgentCmd.secureAgent(SecureAgentCmd.java:249)atoracle.sysman.emctl.secure.agent.SecureAgentCmd.main(SecureAgentCmd.java:200)  For solution, refer to AIX Grid Control 10.2.0.5 SSL Communication and Monitoring Issue since 31-DEC-2010 (Doc ID 1275070.1)

    Read the article

  • Bacula & Multiple Tape Devices, and so on

    - by Tom O'Connor
    Bacula won't make use of 2 tape devices simultaneously. (Search for #-#-# for the TL;DR) A little background, perhaps. In the process of trying to get a decent working backup solution (backing up 20TB ain't cheap, or easy) at $dayjob, we bought a bunch of things to make it work. Firstly, there's a Spectra Logic T50e autochanger, 40 slots of LTO5 goodness, and that robot's got a pair of IBM HH5 Ultrium LTO5 drives, connected via FibreChannel Arbitrated Loop to our backup server. There's the backup server.. A Dell R715 with 2x 16 core AMD 62xx CPUs, and 32GB of RAM. Yummy. That server's got 2 Emulex FCe-12000E cards, and an Intel X520-SR dual port 10GE NIC. We were also sold Commvault Backup (non-NDMP). Here's where it gets really complicated. Spectra Logic and Commvault both sent respective engineers, who set up the library and the software. Commvault was running fine, in so far as the controller was working fine. The Dell server has Ubuntu 12.04 server, and runs the MediaAgent for CommVault, and mounts our BlueArc NAS as NFS to a few mountpoints, like /home, and some stuff in /mnt. When backing up from the NFS mountpoints, we were seeing ~= 290GB/hr throughput. That's CRAP, considering we've got 20-odd TB to get through, in a <48 hour backup window. The rated maximum on the BlueArc is 700MB/s (2460GB/hr), the rated maximum write speed on the tape devices is 140MB/s, per drive, so that's 492GB/hr (or double it, for the total throughput). So, the next step was to benchmark NFS performance with IOzone, and it turns out that we get epic write performance (across 20 threads), and it's like 1.5-2.5TB/hr write, but read performance is fecking hopeless. I couldn't ever get higher than 343GB/hr maximum. So let's assume that the 343GB/hr is a theoretical maximum for read performance on the NAS, then we should in theory be able to get that performance out of a) CommVault, and b) any other backup agent. Not the case. Commvault seems to only ever give me 200-250GB/hr throughput, and out of experimentation, I installed Bacula to see what the state of play there is. If, for example, Bacula gave consistently better performance and speeds than Commvault, then we'd be able to say "**$.$ Refunds Plz $.$**" #-#-# Alas, I found a different problem with Bacula. Commvault seems pretty happy to read from one part of the mountpoint with one thread, and stream that to a Tape device, whilst reading from some other directory with the other thread, and writing to the 2nd drive in the autochanger. I can't for the life of me get Bacula to mount and write to two tape drives simultaneously. Things I've tried: Setting Maximum Concurrent Jobs = 20 in the Director, File and Storage Daemons Setting Prefer Mounted Volumes = no in the Job Definition Setting multiple devices in the Autochanger resource. Documentation seems to be very single-drive centric, and we feel a little like we've strapped a rocket to a hamster, with this one. The majority of example Bacula configurations are for DDS4 drives, manual tape swapping, and FreeBSD or IRIX systems. I should probably add that I'm not too bothered if this isn't possible, but I'd be surprised. I basically want to use Bacula as proof to stick it to the software vendors that they're overpriced ;) I read somewhere that @KyleBrandt has done something similar with a modern Tape solution.. Configuration Files: *bacula-dir.conf* # # Default Bacula Director Configuration file Director { # define myself Name = backuphost-1-dir DIRport = 9101 # where we listen for UA connections QueryFile = "/etc/bacula/scripts/query.sql" WorkingDirectory = "/var/lib/bacula" PidDirectory = "/var/run/bacula" Maximum Concurrent Jobs = 20 Password = "yourekiddingright" # Console password Messages = Daemon DirAddress = 0.0.0.0 #DirAddress = 127.0.0.1 } JobDefs { Name = "DefaultFileJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = File Messages = Standard Pool = File Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" } JobDefs { Name = "DefaultTapeJob" Type = Backup Level = Incremental Client = backuphost-1-fd FileSet = "Full Set" Schedule = "WeeklyCycle" Storage = "SpectraLogic" Messages = Standard Pool = AllTapes Priority = 10 Write Bootstrap = "/var/lib/bacula/%c.bsr" Prefer Mounted Volumes = no } # # Define the main nightly save backup job # By default, this job will back up to disk in /nonexistant/path/to/file/archive/dir Job { Name = "BackupClient1" JobDefs = "DefaultFileJob" } Job { Name = "BackupThisVolume" JobDefs = "DefaultTapeJob" FileSet = "SpecialVolume" } #Job { # Name = "BackupClient2" # Client = backuphost-12-fd # JobDefs = "DefaultJob" #} # Backup the catalog database (after the nightly save) Job { Name = "BackupCatalog" JobDefs = "DefaultFileJob" Level = Full FileSet="Catalog" Schedule = "WeeklyCycleAfterBackup" # This creates an ASCII copy of the catalog # Arguments to make_catalog_backup.pl are: # make_catalog_backup.pl <catalog-name> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl MyCatalog" # This deletes the copy of the catalog RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" Write Bootstrap = "/var/lib/bacula/%n.bsr" Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = "RestoreFiles" Type = Restore Client=backuphost-1-fd FileSet="Full Set" Storage = File Pool = Default Messages = Standard Where = /srv/bacula/restore } FileSet { Name = "SpecialVolume" Include { Options { signature = MD5 } File = /mnt/SpecialVolume } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } # List of files to be backed up FileSet { Name = "Full Set" Include { Options { signature = MD5 } File = /usr/sbin } Exclude { File = /var/lib/bacula File = /nonexistant/path/to/file/archive/dir File = /proc File = /tmp File = /.journal File = /.fsck } } Schedule { Name = "WeeklyCycle" Run = Full 1st sun at 23:05 Run = Differential 2nd-5th sun at 23:05 Run = Incremental mon-sat at 23:05 } # This schedule does the catalog. It starts after the WeeklyCycle Schedule { Name = "WeeklyCycleAfterBackup" Run = Full sun-sat at 23:10 } # This is the backup of the catalog FileSet { Name = "Catalog" Include { Options { signature = MD5 } File = "/var/lib/bacula/bacula.sql" } } # Client (File Services) to backup Client { Name = backuphost-1-fd Address = localhost FDPort = 9102 Catalog = MyCatalog Password = "surelyyourejoking" # password for FileDaemon File Retention = 30 days # 30 days Job Retention = 6 months # six months AutoPrune = yes # Prune expired Jobs/Files } # # Second Client (File Services) to backup # You should change Name, Address, and Password before using # #Client { # Name = backuphost-12-fd # Address = localhost2 # FDPort = 9102 # Catalog = MyCatalog # Password = "i'mnotjokinganddontcallmeshirley" # password for FileDaemon 2 # File Retention = 30 days # 30 days # Job Retention = 6 months # six months # AutoPrune = yes # Prune expired Jobs/Files #} # Definition of file storage device Storage { Name = File # Do not use "localhost" here Address = localhost # N.B. Use a fully qualified name here SDPort = 9103 Password = "lalalalala" Device = FileStorage Media Type = File } Storage { Name = "SpectraLogic" Address = localhost SDPort = 9103 Password = "linkedinmakethebestpasswords" Device = Drive-1 Device = Drive-2 Media Type = LTO5 Autochanger = yes } # Generic catalog service Catalog { Name = MyCatalog # Uncomment the following line if you want the dbi driver # dbdriver = "dbi:sqlite3"; dbaddress = 127.0.0.1; dbport = dbname = "bacula"; DB Address = ""; dbuser = "bacula"; dbpassword = "bbmaster63" } # Reasonable message delivery -- send most everything to email address # and to the console Messages { Name = Standard mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: %t %e of %c %l\" %r" operatorcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" mail = root@localhost = all, !skipped operator = root@localhost = mount console = all, !skipped, !saved # # WARNING! the following will create a file that you must cycle from # time to time as it will grow indefinitely. However, it will # also keep all your messages if they scroll off the console. # append = "/var/lib/bacula/log" = all, !skipped catalog = all } # # Message delivery for daemon messages (no job). Messages { Name = Daemon mailcommand = "/usr/lib/bacula/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" -s \"Bacula daemon message\" %r" mail = root@localhost = all, !skipped console = all, !skipped, !saved append = "/var/lib/bacula/log" = all, !skipped } # Default pool definition Pool { Name = Default Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year } # File Pool definition Pool { Name = File Pool Type = Backup Recycle = yes # Bacula can automatically recycle Volumes AutoPrune = yes # Prune expired volumes Volume Retention = 365 days # one year Maximum Volume Bytes = 50G # Limit Volume size to something reasonable Maximum Volumes = 100 # Limit number of Volumes in Pool } Pool { Name = AllTapes Pool Type = Backup Recycle = yes AutoPrune = yes # Prune expired volumes Volume Retention = 31 days # one Moth } # Scratch pool definition Pool { Name = Scratch Pool Type = Backup } # # Restricted console used by tray-monitor to get the status of the director # Console { Name = backuphost-1-mon Password = "LastFMalsostorePasswordsLikeThis" CommandACL = status, .status } bacula-sd.conf # # Default Bacula Storage Daemon Configuration file # Storage { # definition of myself Name = backuphost-1-sd SDPort = 9103 # Director's port WorkingDirectory = "/var/lib/bacula" Pid Directory = "/var/run/bacula" Maximum Concurrent Jobs = 20 SDAddress = 0.0.0.0 # SDAddress = 127.0.0.1 } # # List Directors who are permitted to contact Storage daemon # Director { Name = backuphost-1-dir Password = "passwordslinplaintext" } # # Restricted Director, used by tray-monitor to get the # status of the storage daemon # Director { Name = backuphost-1-mon Password = "totalinsecurityabound" Monitor = yes } Device { Name = FileStorage Media Type = File Archive Device = /srv/bacula/archive LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } Autochanger { Name = SpectraLogic Device = Drive-1 Device = Drive-2 Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" Changer Device = /dev/sg4 } Device { Name = Drive-1 Drive Index = 0 Archive Device = /dev/nst0 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } Device { Name = Drive-2 Drive Index = 1 Archive Device = /dev/nst1 Changer Device = /dev/sg4 Media Type = LTO5 AutoChanger = yes RemovableMedia = yes; AutomaticMount = yes; AlwaysOpen = yes; RandomAccess = no; LabelMedia = yes } # # Send all messages to the Director, # mount messages also are sent to the email address # Messages { Name = Standard director = backuphost-1-dir = all } bacula-fd.conf # # Default Bacula File Daemon Configuration file # # # List Directors who are permitted to contact this File daemon # Director { Name = backuphost-1-dir Password = "hahahahahaha" } # # Restricted Director, used by tray-monitor to get the # status of the file daemon # Director { Name = backuphost-1-mon Password = "hohohohohho" Monitor = yes } # # "Global" File daemon configuration specifications # FileDaemon { # this is me Name = backuphost-1-fd FDport = 9102 # where we listen for the director WorkingDirectory = /var/lib/bacula Pid Directory = /var/run/bacula Maximum Concurrent Jobs = 20 #FDAddress = 127.0.0.1 FDAddress = 0.0.0.0 } # Send all messages except skipped files back to Director Messages { Name = Standard director = backuphost-1-dir = all, !skipped, !restored }

    Read the article

  • Does Hyper-V support SCSI Pass-through discs in a Server 2003 R2 VM?

    - by Peter Bernier
    I'm running into some difficulties getting pass-through disks to be accessible to a Hyper-v server 2003 r2 virtual machine. Host OS : Server 2008 R2 full w/Hyper-V role Guest OS : Server 2003 R2 (Windows Home Server) The guest's OS disk is a pass-through disk on the IDE controller (not the best solution, but I can live with it). My storage disks will be pass-through disks on the SCSI controller. I'm able to see all of the disks that I'll be using for the VM on the host without issue. The problem that I'm having is that I can't seem to get the guest OS to be able to 'see' the storage drives (as pass-through disks on the SCSI controller). Here's what I'm doing : On the host, the storage drive is set to 'Offline' just like the OS disk (this is required for pass-through to work). In the VM, the storage drive is on the SCSI controller. Hyper-V Integration Tools are installed in guest. That's as far as I'm able to get. I don't see the drive in Computer Management, or in Windows Explorer (I've tried with an unformatted disk, as well as after formatting a partition). I am able to see a removable device that lists the disk's model number in the Guest, but I can't seem to access the storage. (I get an entry in Device Manager that needs drivers, but nothing on the Integration Tools disc works..) Trouble-shooting steps I've tried : If put the pass-through drive on the IDE controller, I can see it in the Guest. If put the storage drive 'Online' in the host and create a VHD on it on the SCSI controller, I can see it in the Guest. I suppose I could create a fixed-size VHD that consumes the entire disk, but I'd rather not have that overhead. I've also extracted the contents of the Integration Tools drivers (x86 and amd64) and tried pointing the disk controller to each of those, with no luck. Can anyone offer suggestions as to how I can get this to work properly?

    Read the article

  • Creating Windows 8.1 system image error

    - by Random
    I'm experiencing "not enough space" error when trying to create system image to a USB hard drive: Detailed error: ERROR - A Volume Shadow Copy Service operation error has occurred: (0x8004231f) Insufficient storage available to create either the shadow copy storage file or other shadow copy data. Blah, blah... There is not enough disk space to create the volume shadow copy on the storage location. Make sure that, for all volumes to be backup up, the minimum required disk space for shadow copy creation is available. This applies to both the backup storage destination and volumes included in the backup. Minimum requirement: For volumes less than 500 megabytes, the minimum is 50 megabytes of free space. For volumes more than 500 megabytes, the minimum is 320 megabytes of free space. Recommended: At least 1 gigabyte of free disk space on each volume if volume size is more than 1 gigabyte. ERROR - A Volume Shadow Copy Service operation error has occurred: (0x8004231f) Insufficient storage available to create either the shadow copy storage file or other shadow copy data. I'd tried both - PowerShell wbAdmin start backup -backupTarget:E: -include:C: -allCritical -quiet and via Control Panel - File History button Clearly both EFI and Windows Recovery Environment partitions don't meet requirements coming from System Image tool (pic below) On top of that all system partitions are now shown as 100% free in Disk Management, it's disturbing but far from the actual state. My question is - hot to create System Image in Windows 8.1?

    Read the article

  • I flashed my DS4700 with a 7 series firmware, now my DS4300 cannot read the disks I moved to that lo

    - by Daniel Hoeving
    In preparation for adding a number of 1Tb SATA disks to our DS4700 I flashed the controller firmware from a 6 series (which only supports up to 2Tb logical drives) to a 7 series (which supports larger than 2Tb logical drives). Attached to this DS4700 was a EXP710 expansion drawer that we had planned to migrate out to our co-location to allieviate the storage issues we were having there. Unfortunately these two projects were planned in isolation to one another so I was at the time unaware of the issue that this would cause. Prior to migrating the drawer I was reading the "IBM TotalStorage DS4000 EXP700 and EXP710 Storage Expansion EnclosuresInstallation, User’s, and Maintenance Guide" and discovered this: Controller firmware 6.xx or earlier has a different metadata (DACstore) data structure than controller firmware 7.xx.xx.xx. Metadata consists of the array and logical drive configuration data. These two metadata data structures are not interchangeable. When powered up and in Optimal state, the storage subsystem with controller firmware level 7.xx.xx.xx can convert the metadata from the drives configured in storage subsystems with controller firmware level 6.xx or earlier to controller firmware level 7.xx.xx.xx metadata data structure. However, the storage subsystem with controller firmware level 6.xx or earlier cannot read the metadata from the drives configured in storage subsystems with controller firmware level 7.xx.xx.xx or later. I had assumed that if I deleted the logical drives and array information on the EXP710 prior to migrating it to the DS4300 (6.60.22 firmware) this would satisfy the above, unfortunately I was wrong. So my question is a) Is it possible to restore the DAC information to its factory settings, b) What tool(s) would I use to accomplish this, or c) is this a lost cause? Daniel.

    Read the article

  • Starting Java applet directly from jar file

    - by Thomas
    The goal is to have an applet run from a jar file. The problem is that the applet only seems to want to run from an exploded jar file. Samples on the Internet suggest this applet tag: <applet code="com.blabla.MainApplet" archive="applet.jar" width="600" height="600"> This will not even try to look in the jar file and fails with: Caused by: java.io.IOException: open HTTP connection failed:http://localhost:8080/helloWord/com/blabbla/MainApplet.class at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) ... 7 more Setting the codebase instead of the archive attribute to the jar file. Looks a bit better. However, the JVM does not realize that it has to open the jar file: <applet code="com.blabla.MainApplet" codebase="applet.jar" width="600" height="600"> Caused by: java.io.IOException: open HTTP connection failed:http://localhost:8080/helloWord/applet.jar/com/blabbla/MainApplet.class at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source) at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source) at java.security.AccessController.doPrivileged(Native Method) ... 7 more How does the applet tag have to be formulated to start an applet class from inside of a jar file?

    Read the article

  • ejb lookup failing with NamingException

    - by Drake
    I've added the following in my web.xml: <ejb-ref> <ejb-ref-name>ejb/userManagerBean</ejb-ref-name> <ejb-ref-type>Session</ejb-ref-type> <home>gha.ywk.name.entry.ejb.usermanager.UserManagerHome</home> <remote>what should go here??</remote> </ejb-ref> The following java code is giving me NamingException: public UserManager getUserManager () throws HUDException { String ROLE_JNDI_NAME = "ejb/userManagerBean"; try { Properties props = System.getProperties(); Context ctx = new InitialContext(props); UserManagerHome userHome = (UserManagerHome) ctx.lookup(ROLE_JNDI_NAME); UserManager userManager = userHome.create(); WASSSecurity user = userManager.getUserProfile("user101", null); return userManager; } catch (NamingException e) { log.error("Error Occured while getting EJB UserManager" + e); return null; } catch (RemoteException ex) { log.error("Error Occured while getting EJB UserManager" + ex); return null; } catch (CreateException ex) { log.error("Error Occured while getting EJB UserManager" + ex); return null; } } The code is used inside the container. By that I mean that the .WAR is deployed on the server (Sun Application Server). StackTrace (after jsight's suggestion): >Exception occurred in target VM: com.sun.enterprise.naming.java.javaURLContext.<init>(Ljava/util/Hashtable;Lcom/sun/enterprise/naming/NamingManagerImpl;)V java.lang.NoSuchMethodError: com.sun.enterprise.naming.java.javaURLContext.<init>(Ljava/util/Hashtable;Lcom/sun/enterprise/naming/NamingManagerImpl;)V at com.sun.enterprise.naming.java.javaURLContextFactory.getObjectInstance(javaURLContextFactory.java:32) at javax.naming.spi.NamingManager.getURLObject(NamingManager.java:584) at javax.naming.spi.NamingManager.getURLContext(NamingManager.java:533) at javax.naming.InitialContext.getURLOrDefaultInitCtx(InitialContext.java:279) at javax.naming.InitialContext.lookup(InitialContext.java:351) at gov.hud.pih.eiv.web.EjbClient.EjbClient.getUserManager(EjbClient.java:34)

    Read the article

  • Java Applet in Firefox

    - by prakash
    Hi All, I am facing a weird problem in Testing server while using applet (using embed tag) in my ASP.NET MVC application Applet works fine locally in both browsers IE and Firefox but when deployed to Testing server its throwing below exception for Firefox only (IE works fine). Please help me out in this basic: exception: javax.xml.parsers.FactoryConfigurationError: Provider <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> not found. java.lang.RuntimeException: javax.xml.parsers.FactoryConfigurationError: Provider <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> not found at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source) at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: javax.xml.parsers.FactoryConfigurationError: Provider <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> not found at javax.xml.parsers.DocumentBuilderFactory.newInstance(Unknown Source) at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:772) at org.apache.log4j.xml.DOMConfigurator.doConfigure(DOMConfigurator.java:696) at org.apache.log4j.helpers.OptionConverter.selectAndConfigure(OptionConverter.java:471) at org.apache.log4j.LogManager.<clinit>(LogManager.java:125) at org.apache.log4j.Logger.getLogger(Logger.java:105) at com.goldleaf.scanner.Logger.<init>(Unknown Source) at com.goldleaf.scanner.Logger.<init>(Unknown Source) at com.goldleaf.scanner.Logger$LoggerHolder.<clinit>(Unknown Source) at com.goldleaf.scanner.Logger.getInstance(Unknown Source) at com.goldleaf.scanner.ScannerApplet.<init>(Unknown Source) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source) at java.lang.reflect.Constructor.newInstance(Unknown Source) at java.lang.Class.newInstance0(Unknown Source) at java.lang.Class.newInstance(Unknown Source) at sun.plugin2.applet.Plugin2Manager$12.run(Unknown Source) at java.awt.event.InvocationEvent.dispatch(Unknown Source) at java.awt.EventQueue.dispatchEvent(Unknown Source) at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source) at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.pumpEvents(Unknown Source) at java.awt.EventDispatchThread.run(Unknown Source) Exception: java.lang.RuntimeException: javax.xml.parsers.FactoryConfigurationError: Provider <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> not found Ignored exception: java.lang.RuntimeException: javax.xml.parsers.FactoryConfigurationError: Provider <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> not found basic: Starting applet teardown basic: Finished applet teardown

    Read the article

  • how to store JSON into POJO using Jackson

    - by user2963680
    I am developing a module where i am using rest service to get data. i am not getting how to store JSON using Jackson and store it which has Queryparam also. Any help is really appreciated as I am new to this.I am trying to do server side filtering in extjs infinte grid which is sending the below request to rest service. when the page load first time, it sends http://myhost/mycontext/rest/populateGrid?_dc=9999999999999&page=1&start=0&limit=500 when you select filter on name and place, it sends http://myhost/mycontext/rest/populateGrid?_dc=9999999999999&filter=[{"type":"string","value":"Tom","field":"name"},{"type":"string","value":"London","field":"Location"}]&page=1&start=0&limit=500 I am trying to save this in POJO and then sending this to database to retrieve data. For this on rest side i have written something like this @Provider @Path("/rest") public interface restAccessPoint { @GET @Path("/populateGrid") @Produces({MediaType.APPLICATION_JSON}) public Response getallGridData(FilterJsonToJava filterparam,@QueryParam("page") String page,@QueryParam("start") String start,@QueryParam("limit") String limit); } public class FilterJsonToJava { @JsonProperty(value ="filter") private List<Filter> data; .. getter and setter below } public class Filter { @JsonProperty("type") private String type; @JsonProperty("value") private String value; @JsonProperty("field") private String field; ...getter and setters below } I am getting the below error The following warnings have been detected with resource and/or provider classes: WARNING: A HTTP GET method, public abstract javax.ws.rs.core.Response com.xx.xx.xx.xxxxx (com.xx.xx.xx.xx.json.FilterJsonToJava ,java.lang.String,java.lang.String,java.lang.String), should not consume any entity. com.xx.xx.xx.xx.json.FilterJsonToJava, and Java type class com.xx.xx.xx.FilterJsonToJava, and MIME media type application/octet-stream was not found [11/6/13 17:46:54:065] 0000001c ContainerRequ E The registered message body readers compatible with the MIME media type are: application/octet-stream com.sun.jersey.core.impl.provider.entity.ByteArrayProvider com.sun.jersey.core.impl.provider.entity.FileProvider com.sun.jersey.core.impl.provider.entity.InputStreamProvider com.sun.jersey.core.impl.provider.entity.DataSourceProvider com.sun.jersey.core.impl.provider.entity.RenderedImageProvider */* -> com.sun.jersey.core.impl.provider.entity.FormProvider ...

    Read the article

  • Executing bat file and returning the prompt

    - by Lieven Cardoen
    I have a problem with cruisecontrol where an ant scripts executes a bat file that doesn't give me the prompt back. As a result, the project in cruisecontrol keeps on bulding forever until I restart cruisecontrol. How can I resolve this? It's a startup.bat from wowza (Streaming Server) that I'm executing: @echo off call setenv.bat if not %WMSENVOK% == "true" goto end set _WINDOWNAME="Wowza Media Server 2" set _EXESERVER= if "%1"=="newwindow" ( set _EXESERVER=start %_WINDOWNAME% shift ) set CLASSPATH="%WMSAPP_HOME%\bin\wms-bootstrap.jar" rem cacls jmxremote.password /P username:R rem cacls jmxremote.access /P username:R rem NOTE: Here you can configure the JVM's built in JMX interface. rem See the "Server Management Console and Monitoring" chapter rem of the "User's Guide" for more information on how to configure the rem remote JMX interface in the [install-dir]/conf/Server.xml file. set JMXOPTIONS=-Dcom.sun.management.jmxremote=true rem set JMXOPTIONS=%JMXOPTIONS% -Djava.rmi.server.hostname=192.168.1.7 rem set JMXOPTIONS=%JMXOPTIONS% -Dcom.sun.management.jmxremote.port=1099 rem set JMXOPTIONS=%JMXOPTIONS% -Dcom.sun.management.jmxremote.authenticate=false rem set JMXOPTIONS=%JMXOPTIONS% -Dcom.sun.management.jmxremote.ssl=false rem set JMXOPTIONS=%JMXOPTIONS% -Dcom.sun.management.jmxremote.password.file= "%WMSCONFIG_HOME%/conf/jmxremote.password" rem set JMXOPTIONS=%JMXOPTIONS% -Dcom.sun.management.jmxremote.access.file= "%WMSCONFIG_HOME%/conf/jmxremote.access" rem log interceptor com.wowza.wms.logging.LogNotify - see Javadocs for ILogNotify %_EXESERVER% "%_EXECJAVA%" %JAVA_OPTS% %JMXOPTIONS% -Dcom.wowza.wms.AppHome="%WMSAPP_HOME%" -Dcom.wowza.wms.ConfigURL="%WMSCONFIG_URL%" -Dcom.wowza.wms.ConfigHome="%WMSCONFIG_HOME%" -cp %CLASSPATH% com.wowza.wms.bootstrap.Bootstrap start :end

    Read the article

  • eclipse django using wrong settings.py in pythonpath

    - by user1290264
    I have pydev/django installed in eclipse, and it runs fine. However, after adding a second django project to eclipse and running the server ('http://127.0.0.1:8000') the pythonpath seems to be stuck on project2 even when I run project1. As a summary, I have two django projects: project1, project2. When I run the django server for project1 I get: Validating models... 0 errors found Django version 1.5, using settings 'project1.settings' Development server is running at 'http://127.0.0.1:8000/' Quit the server with CTRL-BREAK. The above seems to suggest that django is using the correct settings file; however, when I go to 'http://127.0.0.1:8000/' it displays the urls from project2. Also, if I go to 'http://127.0.0.1:8000/admin' the models are getting pulled from the sqlite.db file in project2 as well. I've even tried removing project2 from eclipse entirely and now at 'http://127.0.0.1:8000/admin' I get this error: Python Path: ['C:\Users\Brad\workspaces\In Progress\project2', 'C:\Users\Brad\workspaces\In Progress\project2', 'C:\Python27\DLLs', 'C:\Python27\lib', 'C:\Python27\lib\plat-win', 'C:\Python27\lib\lib-tk', 'C:\Python27', 'C:\Python27\lib\site-packages', 'C:\Windows\system32\python27.zip'] If I run the server on a different port with project1 the path seems to be fine: runserver 7000 --noreload Then 'http://127.0.0.1:7000/' uses project1's paths, but it doesn't seem like I should have to do this. Note: I have setup the run configurations as correctly as I know how. In the main tab, the project and main module both point to the correct project (project1), and the "PYTHONPATH that will be used in the run:" includes project1. Also, I have cleared my browser history, cookies, and everything that chrome would let me delete.

    Read the article

  • java.lang.IllegalAccessError in Windows xp

    - by Priya.S
    Hi I have installed NetBeens 6.9.1 in my windows xp system. java web application wokring fine. But i have not get web method in my java web application. its error occurring. Error Message : init: deps-module-jar: deps-ear-jar: deps-jar: wsimport-init: Created dir: D:\javaprg\projects\myApp\build\generated-sources\jax-ws wsimport-client-userServiceService: Created dir: D:\javaprg\projects\myApp\build\generated\jax-wsCache\userServiceService D:\javaprg\projects\myApp\nbproject\jaxws-build.xml:31: java.lang.IllegalAccessError: tried to access class com.sun.tools.ws.Invoker from class com.sun.tools.ws.ant.WrapperTask at com.sun.tools.ws.ant.WrapperTask.createClassLoader(WrapperTask.java:85) at com.sun.istack.tools.ProtectedTask.execute(ProtectedTask.java:46) at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291) at sun.reflect.GeneratedMethodAccessor139.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:589) at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106) at org.apache.tools.ant.Task.perform(Task.java:348) at org.apache.tools.ant.Target.execute(Target.java:390) at org.apache.tools.ant.Target.performTasks(Target.java:411) at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1397) at org.apache.tools.ant.Project.executeTarget(Project.java:1366) at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41) at org.apache.tools.ant.Project.executeTargets(Project.java:1249) at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:281) at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:539) at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:154) BUILD FAILED (total time: 1 second)

    Read the article

  • When using Clipboard, Toolkit and Transferable, I get an error objecting to image width and height

    - by Mike King
    When I run the following code it triggers an error message. The error message is shown below the code. What code changes, or changes to the image file, are needed to fix this error? Help will be appreciated. import java.awt.*; import java.awt.datatransfer.*; public class LoadToClipboard { public static void main( String [] args ) { Toolkit tolkit = Toolkit.getDefaultToolkit(); Clipboard clip = tolkit.getSystemClipboard(); clip.setContents( new ImageSelection( tolkit.getImage("StackOverflowLogo.png")) , null ); } } class ImageSelection implements Transferable { private Image image; public ImageSelection(Image image) { this.image = image; } // Returns supported flavors public DataFlavor[] getTransferDataFlavors() { return new DataFlavor[]{DataFlavor.imageFlavor}; } // Returns true if flavor is supported public boolean isDataFlavorSupported(DataFlavor flavor) { return DataFlavor.imageFlavor.equals(flavor); } // Returns image public Object getTransferData(DataFlavor flavor) throws UnsupportedFlavorException { if (!DataFlavor.imageFlavor.equals(flavor)) { throw new UnsupportedFlavorException(flavor); } return image; } } Exception in thread "main" java.lang.IllegalArgumentException: Width (-1) and height (-1) cannot be <= 0 at java.awt.image.DirectColorModel.createCompatibleWritableRaster(DirectColorModel.java:999) at sun.awt.datatransfer.DataTransferer.imageToStandardBytes(DataTransferer.java:1994) at sun.awt.windows.WDataTransferer.imageToPlatformBytes(WDataTransferer.java:267) at sun.awt.datatransfer.DataTransferer.translateTransferable(DataTransferer.java:1123) at sun.awt.windows.WDataTransferer.translateTransferable(WDataTransferer.java:163) at sun.awt.windows.WClipboard.setContentsNative(WClipboard.java:73) at sun.awt.datatransfer.SunClipboard.setContents(SunClipboard.java:93) at automateSignature.LoadToClipboard.main(LoadToClipboard.java:8) I have tried to find a place in the code where width and height can be specified, but have not succeeded. I also examined the properties of the jpg file and the w and h are specified.enter code here

    Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >