Search Results

Search found 13437 results on 538 pages for 'trusted root certificates'.

Page 93/538 | < Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >

• Munin not creating HTML files in Ubuntu Server 14.04

  - by lepe

  I have used munin in several servers and this is the first time is taking me so much time to set it up. When I telnet munin directly, I can list the services, there is no error at the logs and munin its being updated every 5 minutes. However no html files are created. I'm using the default location (/var/cache/munin/www) and I can confirm the permissions of that directory are set to munin.munin (IP and domain has been changed) munin.conf: dbdir /var/lib/munin htmldir /var/cache/munin/www logdir /var/log/munin rundir /var/run/munin [example.com;] address 100.100.50.200 munin-node.conf: log_level 4 log_file /var/log/munin/munin-node.log pid_file /var/run/munin/munin-node.pid background 1 setsid 1 user root group root host_name example.com allow ^127\.0\.0\.1$ allow ^100\.100\.50\.200$ allow ^::1$ /etc/hosts : 100.100.50.200 example.com 127.0.0.1 localhost $ telnet example.com 4949 Trying 100.100.50.200... Connected to example.com. Escape character is '^]'. # munin node at example.com list apache_accesses apache_processes apache_volume cpu cpuspeed df df_inode entropy fail2ban forks fw_packets if_err_eth0 if_err_eth1 if_eth0 if_eth1 interrupts ipmi_fans ipmi_power ipmi_temp irqstats load memory munin_stats mysql_bin_relay_log mysql_commands mysql_connections mysql_files_tables mysql_innodb_bpool mysql_innodb_bpool_act mysql_innodb_insert_buf mysql_innodb_io mysql_innodb_io_pend mysql_innodb_log mysql_innodb_rows mysql_innodb_semaphores mysql_innodb_tnx mysql_myisam_indexes mysql_network_traffic mysql_qcache mysql_qcache_mem mysql_replication mysql_select_types mysql_slow mysql_sorts mysql_table_locks mysql_tmp_tables ntp_2001:e40:100:208::123 ntp_91.189.94.4 ntp_kernel_err ntp_kernel_pll_freq ntp_kernel_pll_off ntp_offset ntp_states open_files open_inodes postfix_mailqueue postfix_mailvolume proc_pri processes swap threads uptime users vmstat fetch df _dev_sda3.value 2.1762874086869 _sys_fs_cgroup.value 0 _run.value 0.0503536980635825 _run_lock.value 0 _run_shm.value 0 _run_user.value 0 _dev_sda5.value 0.0176986285727571 _dev_sda8.value 1.08464646179852 _dev_sda7.value 0.0346633563514803 _dev_sda9.value 6.81031810822797 _dev_sda6.value 9.0932802215469 . /var/log/munin/munin-node.log Process Backgrounded 2014/08/16-14:13:36 Munin::Node::Server (type Net::Server::Fork) starting! pid(19610) Binding to TCP port 4949 on host 100.100.50.200 with IPv4 2014/08/16-14:23:11 CONNECT TCP Peer: "[100.100.50.200]:55949" Local: "[100.100.50.200]:4949" 2014/08/16-14:36:16 CONNECT TCP Peer: "[100.100.50.200]:56209" Local: "[100.100.50.200]:4949" /var/log/munin/munin-update.log ... 2014/08/16 14:30:01 [INFO]: Starting munin-update 2014/08/16 14:30:01 [INFO]: Munin-update finished (0.00 sec) 2014/08/16 14:35:02 [INFO]: Starting munin-update 2014/08/16 14:35:02 [INFO]: Munin-update finished (0.00 sec) 2014/08/16 14:40:01 [INFO]: Starting munin-update 2014/08/16 14:40:01 [INFO]: Munin-update finished (0.00 sec) $ ls -la /var/cache/munin/www/ drwxr-xr-x 3 munin munin 19 Aug 16 13:55 . drwxr-xr-x 3 root root 16 Aug 16 13:54 .. drwxr-xr-x 2 munin munin 4096 Aug 16 13:55 static Any ideas on why it is not working? EDIT This is how /var/log/munin/ log looks like after some days: -rw-r----- 1 www-data 0 Aug 16 13:54 munin-cgi-graph.log -rw-r----- 1 www-data 0 Aug 16 13:54 munin-cgi-html.log -rw-rw-r-- 1 munin 0 Aug 16 13:55 munin-html.log -rw-r----- 1 munin 0 Aug 19 06:18 munin-limits.log -rw-r----- 1 munin 15K Aug 18 14:10 munin-limits.log.1 -rw-r----- 1 munin 1.8K Aug 18 06:15 munin-limits.log.2.gz -rw-rw-r-- 1 munin 1.3K Aug 17 06:15 munin-limits.log.3.gz -rw-r--r-- 1 root 6.5K Aug 16 13:55 munin-node-configure.log -rw-r--r-- 1 root 0 Aug 17 06:18 munin-node.log -rw-r--r-- 1 root 420 Aug 16 14:52 munin-node.log.1.gz -rw-r----- 1 munin 0 Aug 19 06:18 munin-update.log -rw-r----- 1 munin 11K Aug 18 14:10 munin-update.log.1 -rw-r----- 1 munin 1.6K Aug 18 06:15 munin-update.log.2.gz -rw-rw-r-- 1 munin 1.5K Aug 17 06:15 munin-update.log.3.gz

  Read the article

• why i failed to build vsftp?

  - by hugemeow

  make, then failed with the following message. the main point is /lib/libcap.so.1: could not read symbols: File in wrong format, confusing... gcc -c readwrite.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c opts.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ssl.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sslslave.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ptracesandbox.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ftppolicy.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sysutil.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sysdeputil.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -o vsftpd main.o utility.o prelogin.o ftpcmdio.o postlogin.o privsock.o tunables.o ftpdataio.o secbuf.o ls.o postprivparent.o logging.o str.o netstr.o sysstr.o strlist.o banner.o filestr.o parseconf.o secutil.o ascii.o oneprocess.o twoprocess.o privops.o standalone.o hash.o tcpwrap.o ipaddrparse.o access.o features.o readwrite.o opts.o ssl.o sslslave.o ptracesandbox.o ftppolicy.o sysutil.o sysdeputil.o -Wl,-s `./vsf_findlibs.sh` /lib/libcap.so.1: could not read symbols: File in wrong format collect2: ld returned 1 exit status make: *** [vsftpd] Error 1 [mirror@hugemeow vsftpd]$ ls /lib/libc libc-2.5.so libcap.so.1.10 libcidn.so.1 libcom_err.so.2.1 libcrypto.so.0.9.8e libcrypt.so.1 libcap.so.1 libcidn-2.5.so libcom_err.so.2 libcrypt-2.5.so libcrypto.so.6 libc.so.6 [mirror@hugemeow vsftpd]$ ls /lib/libc libc-2.5.so libcap.so.1.10 libcidn.so.1 libcom_err.so.2.1 libcrypto.so.0.9.8e libcrypt.so.1 libcap.so.1 libcidn-2.5.so libcom_err.so.2 libcrypt-2.5.so libcrypto.so.6 libc.so.6 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -l lrwxrwxrwx 1 root root 14 Mar 20 2012 /lib/libcap.so.1 -> libcap.so.1.10 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -lh lrwxrwxrwx 1 root root 14 Mar 20 2012 /lib/libcap.so.1 -> libcap.so.1.10 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -lhL -rwxr-xr-x 1 root root 12K Mar 15 2007 /lib/libcap.so.1 this may have something to do with 64 bit system, but i have make modification to vsf_findlibs.sh 48 # Look for libcap (capabilities) 49 if locate_library /lib64/libcap.so.1; then 50 echo "/lib/libcap.so.1"; 51 elif locate_library /lib64/libcap.so.2; then 52 echo "/lib/libcap.so.2"; 53 else 54 # locate_library /usr/lib/libcap.so && echo "-lcap"; 55 # locate_library /lib/libcap.so && echo "-lcap"; 56 locate_library /lib64/libcap.so.1 && echo "-lcap"; 57 fi but make failed with the same error, why?

  Read the article

• Completely reset mysql server authentication

  - by p3dro-sola

  I was trying to change the password for a user on a mysql server, and i appear to have locked myself out. I have access to the root user, but root doesn't have the privileges to access any databses, including the 'mysql' database where all the config is kept. Is there any way i can 'reset' the root user? (i have full file-system access) ... or do i just need to reinstall (can i salvage my data?) Thanks. -Ped

  Read the article

• How to set up IP forwarding on Nexenta (Solaris)?

  - by Gleb

  I am trying to set up IP forwarding on my Nexenta box: root@hdd:~# uname -a SunOS hdd 5.11 NexentaOS_134f i86pc i386 i86pc Solaris The box has 2 network interfaces: root@hdd:~# ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g1: flags=1001100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4,FIXEDMTU> mtu 1500 index 2 inet 192.168.12.2 netmask ffffff00 broadcast 192.168.12.255 ether 68:5:ca:9:51:b8 myri10ge0: flags=1100843<UP,BROADCAST,RUNNING,MULTICAST,ROUTER,IPv4> mtu 9000 index 3 inet 10.10.10.10 netmask ffffff00 broadcast 10.10.10.255 ether 0:60:dd:47:87:2 lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1 inet6 ::1/128 192.168.12.0 is my normal LAN with 192.168.12.1 being the firewall/gateway 10.10.10.0 is a separate LAN for iSCSI (with no internet access) I want to set up IP forwarding so that a computer on 10.10.10.0 will be able to access the internet by using 10.10.10.10 as a gateway (I don't need any port forwarding) I have turned on IP forwarding: root@hdd:~# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing disabled disabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled Routing services "route:default ripng:default" Routing daemons: STATE FMRI disabled svc:/network/routing/rdisc:default disabled svc:/network/routing/route:default disabled svc:/network/routing/legacy-routing:ipv4 disabled svc:/network/routing/legacy-routing:ipv6 disabled svc:/network/routing/ripng:default online svc:/network/routing/ndp:default But when I dry to start ipnat, I get an error: root@hdd:~# ipnat -CF -f /etc/ipf/ipnat.conf ioctl(SIOCGNATS): I/O error Here is the config: root@hdd:~# cat /etc/ipf/ipnat.conf #!/sbin/ipnat -f - # map e1000g1 10.10.10.10/24 -> 192.168.12.2/32 So the question is how to fix this.. Thanks in advance!

  Read the article

• How to combine try_files and sendfile on Nginx?

  - by hcalves

  I need Nginx to serve a file relative from document root if it exists, then fallback to an upstream server if it doesn't. This can be accomplished with something like: server { listen 80; server_name localhost; location / { root /var/www/nginx/; try_files $uri @my_upstream; } location @my_upstream { internal; proxy_pass http://127.0.0.1:8000; } } Fair enough. The problem is, my upstream is not serving the contents of URI directly, but instead, returning X-Accel-Redirect with a location relative to document root (it generates this file on-the-fly): % curl -I http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg HTTP/1.0 200 OK Date: Mon, 26 Nov 2012 20:58:25 GMT Server: WSGIServer/0.1 Python/2.7.2 X-Accel-Redirect: animals/kitten.jpg__100x100__crop.jpg Content-Type: text/html; charset=utf-8 Apparently, this should work. The problem though is that Nginx tries to serve this file from some internal default document root instead of using the one specified in the location block: 2012/11/26 18:44:55 [error] 824#0: *54 open() "/usr/local/Cellar/nginx/1.2.4/htmlanimals/kitten.jpg__100x100__crop.jpg" failed (2: No such file or directory), client: 127.0.0.1, server: localhost, request: "GET /animals/kitten.jpg__100x100__crop.jpg HTTP/1.1", upstream: "http://127.0.0.1:8000/animals/kitten.jpg__100x100__crop.jpg", host: "127.0.0.1:80" How do I force Nginx to serve the file relative to the right document root? According to XSendfile documentation the returned path should be relative, so my upstream is doing the right thing.

  Read the article

• I am unable to find login page for phpmyadmin

  - by Awan

  I was using phpmyadmin(in Wamp) without a password for root. I thought to set a password for root and goto Privileges page and set a password for root. Now whenever I go to localhost/phpmyadmin page it gives me the following error. MySQL said: Documentation #1045 - Access denied for user 'root'@'localhost' (using password: NO) phpMyAdmin tried to connect to the MySQL server, and the server rejected the connection. You should check the host, username and password in your configuration and make sure that they correspond to the information given by the administrator of the MySQL server. I don't know that what is the problem. It is not showing me a login type page to enter a username and password. Any idea that what is the problem ? Thanks

  Read the article

• Limit which processes a user can restart with supervisor?

  - by dvcolgan

  I have used supervisor to manage a Gunicorn process running a Django site, though this question could pertain to anything being managed by supervisor. Previously I was the only person managing and using our server, and supervisor just ran as root and I would use sudo to run supervisorctl restart myapp when needed. Now our server has to support multiple users working on different sites, and each project needs to be able to restart their own gunicorn processes without being able to restart other users' processes. I followed this blog post: http://drumcoder.co.uk/blog/2010/nov/24/running-supervisorctl-non-root/ and was able to allow non-root users to use supervisorctl, but now anyone can restart anyone else's processes. From the looks of it, supervisor doesn't have a way of doing per-user access control. Anyone have any ideas on how to allow users to restart only their own processes without root?

  Read the article

• Dual booting Linux/Win7, Grub refuses to load Win7

  - by JohnB

  Decided to give Linux Mint a try (Ubuntu's interface annoys me), so I installed it with the intention of dual booting with Windows 7. Installation went fine, but now I can only boot into Linux Mint. Grub lists two Windows 7 menu options, but selecting either of them causes an "unknown file system" error and dumps me into a Grub recovery prompt. There, I have to manually reset the root and prefix options, as they reset hd0,msdos6 when they should be hd0,msdos5. I ran Boot Repair twice, once to fix grub errors, once to rebuild the MBR, but it didn't fix anything. Here is the log: http://paste.ubuntu.com/1029675/ fdisk output: Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 1486249145 743021149 7 HPFS/NTFS/exFAT /dev/sda3 1486249982 1953523711 233636865 5 Extended /dev/sda5 1486249984 1945141247 229445632 83 Linux /dev/sda6 1945143296 1953523711 4190208 82 Linux swap / Solaris grub.cfg: ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos1)' search --no-floppy --fs-uuid --set=root 86184D18184D091F chainloader +1 } menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 56D84F84D84F60FB chainloader +1 } ### END /etc/grub.d/30_os-prober ### I have found a few similar troubleshooting guides so far, but so far no amount of updating/configuring Grub has been successful. Last resort is, I suppose, use the W7 recovery disc and start over. Thanks in advance! Linux Mint 13 Maya, 64-bit Windows 7 Home Edition, 64-bit

  Read the article

• What does "link to unknown" mean?

  - by Question Overflow

  I just upgraded my server to Fedora 17 which made a switch of my bootloader from GRUB Legacy to GRUB2. There are two symbolic links in the /etc folder that points to the files grub.conf and grub.cfg in /boot/grub and /boot/grub2 respectively. Though the targets seem correct, the link icons are displaying an X status which seems to indicate that the links are broken. Upon right-clicking the property type, it states "link to unknown". The file size of the link corresponds exactly with the file size of the target file, so, why does the links appear to be broken? The image of the link icons: As requested, the following are the outputs from the commands: $ ls -l /etc/grub.conf lrwxrwxrwx. 1 root root 22 Jul 14 2011 /etc/grub.conf -> ../boot/grub/grub.conf $ ls -l /etc/grub2.cfg lrwxrwxrwx. 1 root root 22 Dec 10 18:57 /etc/grub2.cfg -> ../boot/grub2/grub.cfg

  Read the article

• Excluding executables in winsxs folder

  - by Yasser Sobhdel

  I am facing a big problem since there are many msbuild.exe files in .Netframework and winsxs folders and I don't know if it is required to set all of them as trusted in the antivirus. The path changes server to server and hence it makes life harder! If it matters to you, I am using Kaspersky endpoint security 10. When defining trusted application, as far as I know, you must point exactly to the executable with hard-coded path. Thanks

  Read the article

• MegaCLI always returns blank output

  - by JamesHannah

  This server is a Dell R200 running Ubuntu 8.04LTS using a LSI SAS1068E raid card supplied from Dell, I suspect that there might be some kind of RAID issue with the hardware raid built into the motherboard, but I can't seem to get MegaCLi to return any useful output: root@81 $ ./MegaCli -AdpAllInfo -aALL root@81 $ ./MegaCli -PDList -aALL root@81 $ The disks work and AFAIK the raid software is installed correctly. I've seen this issue on RedHat issues also in the past. The RAID was initially setup through the BIOS on this server and appears to be functioning fine apart from this.

  Read the article

• grub-efi refuses to chainload Windows 8.1

  - by Alexei Averchenko

  I have installed LMDE (with grub in MBR) after I installed Windows 8.1. I then installed the grub-efi package and added the custom Windows options: #!/bin/sh exec tail -n +3 $0 menuentry "Windows" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Boot/bkpbootx64.efi } menuentry "Windows (backup bootloader)" { search --fs-uuid --no-floppy --set=root A89A-7F4C chainloader (${root})/EFI/Microsoft/Boot/bkpbootmgfw.efi } These are basically a leftover from my older Ubuntu setup. However, grub is refusing to load them, complaining about the invalid signature. What do I do now?

  Read the article

• security issue of Linux sudo command?

  - by George2

  Hello everyone, 1. I am using Red Hat Enterprise 5 Linux box. I find if a user is in /etc/sudoers file, then if the user run command with sudo, the user will run this command with root privilege (without knowing root password, the user runs sudo only need to input the user's own password in order to run a command with sudo). Is that correct understanding? 2. If yes, then is it a security hole? Since users other than root could run with root privilege? thanks in advance, George

  Read the article

• Installing Ruby on Rails on Ubuntu 10.04: A Living Nightmare

  - by emptyset

  Update #3: Starting over from scratch, shortened this post, decided to re-install a clean copy of Ubuntu 10.04 on a VM and go through the walk-through again. So, all the steps go without a hitch. As root: root@ubuntu:~/rubygems-1.3.7# ruby -v ruby 1.8.7 (2010-01-10 patchlevel 249) [x86_64-linux] root@ubuntu:~/rubygems-1.3.7# gem -v 1.3.7 root@ubuntu:~/rubygems-1.3.7# rails -v Rails 2.3.8 Now, as myself (in a separate term): emptyset@ubuntu:~$ ruby -v ruby 1.8.7 (2010-01-10 patchlevel 249) [x86_64-linux] emptyset@ubuntu:~$ gem -v /usr/local/lib/site_ruby/1.8/rubygems.rb:10:in `require': no such file to load -- rubygems/defaults (LoadError) from /usr/local/lib/site_ruby/1.8/rubygems.rb:10 from /usr/local/bin/gem:8:in `require' from /usr/local/bin/gem:8 emptyset@ubuntu:~$ rails -v bash: /usr/bin/rails: Permission denied So, this appears to be a permissions issue, but I don't understand why. Specifically, if I have to start making things go+rx all over the place, I really need to understand which specific files need the permissions change.

  Read the article

• How to setup nginx and a subdomain

  - by Evolutio

  i have gitlab installed on my server and it works on all domains eg: git.lars-dev.de, lars-dev.de and *.lars-dev.de how I can run gitlab only on git.lars-dev.de and another subdomain on files.lars-dev.de? my lars-dev conf: server { listen *:80; ## listen for ipv4; this line is default and implied #listen [::]:80 default_server ipv6only=on; ## listen for ipv6 root /var/www/webdata/lars-dev.de/htdocs; index index.html index.htm; server_name lars-dev.de; location / { try_files $uri $uri/ /index.html; } #error_page 500 502 503 504 /50x.html; #location = /50x.html { # root /usr/share/nginx/www; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } and the gitlab configuration: upstream gitlab { server unix:/home/git/gitlab/tmp/sockets/gitlab.socket; } server { listen *:80; # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea server_name git.lars-dev.de; # e.g., server_name source.example.com; server_tokens off; # don't show the version number, a security best practice root /home/git/gitlab/public; # individual nginx logs for this gitlab vhost access_log /var/log/nginx/gitlab_access.log; error_log /var/log/nginx/gitlab_error.log; location / { # serve static files from defined root folder;. # @gitlab is a named location for the upstream fallback, see below try_files $uri $uri/index.html $uri.html @gitlab; } # if a file, which is not found in the root folder is requested, # then the proxy pass the request to the upsteam (gitlab unicorn) location @gitlab { proxy_read_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_connect_timeout 300; # https://github.com/gitlabhq/gitlabhq/issues/694 proxy_redirect off; proxy_set_header X-Forwarded-Proto $scheme; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_pass http://gitlab; } }

  Read the article

• Free space on Dedi' in CentOS

  - by Trance84

  It will sound stupid but i need to figure out how much disk space i have in my dedicated server, it runs CentOS6...the last command i issued was this [root@ks34900 ~]# df -h Filesystem Size Used Avail Use% Mounted on rootfs 9.7G 6.4G 2.9G 69% / /dev/root 9.7G 6.4G 2.9G 69% / none 1000M 288K 1000M 1% /dev /dev/sda2 914G 200M 868G 1% /home But again, stupid as it may sound... i cant figure out how much space i have in "/" folder (root) And is it possible that "/usr" have a different space (partition)?

  Read the article

• sudo/su command for Red Hat Server 5.4

  - by rednaxela

  Without going into too much detail, I need to execute one linux command on redhat with root user access. Red Hat Server 5.4 does not recognise the sudo command. The command su can be used to switch to the root user on redhat, but su cannot be done in one line. For example the command: su ; cd opt/storage/RootAccessFolder will not work because this only switches you to root, then executes the cd command once you have logged out from the root user. I guess what i'm looking for is like a.. sudo cd opt/storage/RootAccessFolder but I say again, sudo doesn't work. Any ideas?

  Read the article

• Graphics driver for ubuntu on dell latitude XT

  - by marc.riera

  we have a laptop (dell latitude xt) on our company, and we would like to install ubuntu on it. windows 7 works fine out of the box, so the hardware is fine. since this laptop has a touchscreen we just installed ubuntu 10.10 netbook edition 32x. But, we do not manage to enable the touchscreen, neither the vga graphic drivers. this is the output from lspci, if somebody cares. 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 7930 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS7932 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc Device 7934 00:06.0 PCI bridge: ATI Technologies Inc RS7936 PCI Bridge 00:07.0 PCI bridge: ATI Technologies Inc Device 7937 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon Xpress 1250 03:01.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller 03:01.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller 03:01.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller 09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5756ME Gigabit Ethernet PCI Express 0b:00.0 Network controller: Broadcom Corporation BCM4321 802.11a/b/g/n (rev 03) I've tryied to install ati drivers 9.3 , which I downloaded and installed, unpacked and installed, builded and installed, but nothing worked. Looks like the latests version is just accepted to work on jaunty 9.04, so they are kind of old. what else I can do? thanks. Marc Information added: lsusb and lspci -n |grep 01:05.0 sysop@wl083517:~$ lspci -n |grep 01:05.0 01:05.0 0300: 1002:7942 sysop@wl083517:~$ lsusb Bus 006 Device 002: ID 413c:8138 Dell Computer Corp. Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard EAP-SIM Port Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 413c:8140 Dell Computer Corp. Wireless 360 Bluetooth Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 1b96:0001 N-Trig Duosense Transparent Electromagnetic Digitizer Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 03f0:1807 Hewlett-Packard Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub sysop@wl083517:~$

  Read the article

• Nginx - Enable PHP for all hosts

  - by F21

  I am currently testing out nginx and have set up some virtual hosts by putting configurations for each virtual host in its own file in a folder called sites-enabled. I then ask nginx to load all those config files using: include C:/nginx/sites-enabled/*.conf; This is my current config: http { server_names_hash_bucket_size 64; include mime.types; include C:/nginx/sites-enabled/*.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; root C:/www-root; #charset koi8-r; #access_log logs/host.access.log main; location / { index index.html index.htm index.php; } # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } } server{ server_name localhost; } } And this is one of the configs for a virtual host: server { server_name testsubdomain.testdomain.com root C:/www-root/testsubdomain.testdomain.com; } The problem is that for testsubdomain.testdomain.com, I cannot get php scripts to run unless I have defined a location block with fastcgi parameters for it. What I would like to do is to be able to enable PHP for all hosted sites on this server (without having to add a PHP location block with fastcgi parameters) for maintainability. This is so that if I need to change any fastcgi values for PHP, I can just change it in 1 location. Is this something that's possible for nginx? If so, how can this be done?

  Read the article

• keyboard mappings are totally screwed after updating to kde4

  - by zeonglow

  I recently upgraded from KDE 3.5 to KDE 4, and I have been having weird issues with my keyboard. In one of the virtual consoles e.g. when I press ctrl + alt 1 , I can type perfectly, but in KDE, several of the number keys don't work, the left and right arrows don't work either. When I press the right arrow key in xev I get this: KeyRelease event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 903459, (111,55), root:(115,836), state 0x10, keycode 114 (keysym 0x1008ff11, XF86AudioLowerVolume), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False When I press the '3' key it toggles my Bookmarks toolbar in Firefox, in xev I get this: KeyPress event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 999968, (94,115), root:(98,896), state 0x10, keycode 12 (keysym 0x1008ff30, XF86Favorites), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x3600001, root 0x6f, subw 0x0, time 1000032, (94,115), root:(98,896), state 0x10, keycode 12 (keysym 0x1008ff30, XF86Favorites), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False As this is deeper down, changing the type of keyboard in the KDE meun's has no effect. I'm slowly beginning to wade through the mountains of documentation about the X keyboard model, but there has to be a better way. Does anyone no what it is? Edit: 1234567890 ! after deleting the entire .kde folder. but only until I change the Keyboard settings from the "system settings" applet, then its hosed full time. Regardless of what I set the settings too. (restore to default settings doesn't) 2nd Edit: I'm using Gentoo AMD64, I was upgrading from KDE 3.5 KDE 4.2. I think I had manual settings before, although I didn't change anything. I was originally running KDE without HAL until that stop working a year or so ago. The only customisation I made was to set the multimedia keys to control Amarok. 3rd Edit $ grep xkb /var/log/Xorg.0.log (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" (**) Option "xkb_rules" "evdev" (**) Option "xkb_model" "evdev" (**) Option "xkb_layout" "us" Xorg.0.log has this to say: (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. (WW) Disabling Mouse1 (WW) Disabling Keyboard1 My Xorg.conf has this in it. Identifier "Keyboard1" Driver "kbd" Option "AutoRepeat" "500 30" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "gb"

  Read the article

• /etc/inputrc does not seem to be recognized as user on Ubuntu 8.04.2 LTS

  - by Brian Hogg

  On a new installation of Ubuntu 8.04.2 LTS, logging in as a standard user does not maintain the keybindings (whether through sudo su - or direct from ssh). As the root user everything is fine and /root/.inputrc does not exist (only /etc/inputrc) which has its default settings. In addition setting a ~/.bashrc and ~/.profile to the same as the root user (and chown'ing to user:user) has no effect. Am I missing something here?

  Read the article

• What is this warning message all about?

  - by brilliant

  Why is it so that every time when i start "FireFox", this message pops up: advisordb.wmtransfer.com: 443 uses an invalid security cetificate. The certificate is not trusted because the issuer certificate is not trusted. (Error code: sec_error_untrusted_issuer) I guess it has to do with "WebMoney" that I had installed on my computer. But I have already uninstalled it, yet this message still pops up.

  Read the article

• How to move a ruby on rails application to a new server

  - by ManiacZX

  I have a rails app on an old Ubuntu server I need to move onto a new machine. I haven't worked with ruby on rails so I don't really know anything about the structure of the app. I want to load this onto an Ubuntu 8.04 AMI on Amazon EC2 and am looking for any information regarding the migration process such as: Do I copy over the entire folder defined as the application root in the mongrel config (for ex: /u/apps/myapp/current) or just certain folders? Am I looking for trouble if I go with the latest versions of ruby and the various gems? Any general gotchas to look out for in the process. Current server information: root@webnode001:/# cat /proc/version Linux version 2.6.15-27-server (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP Fri Dec 8 18:43:54 UTC 2006 root@webnode001:/# rails -v Rails 1.2.3 root@webnode001:/# mongrel_rails cluster::configure --version Version 1.0.1 root@webnode001:/# gem -v 0.9.0 root@webnode001:/# gem list -l *** LOCAL GEMS *** actionmailer (1.3.3, 1.2.5) Service layer for easy email delivery and testing. actionpack (1.13.3, 1.12.5) Web-flow and rendering framework putting the VC in MVC. actionwebservice (1.2.3, 1.1.6) Web service support for Action Pack. activerecord (1.15.3, 1.15.2, 1.14.4) Implements the ActiveRecord pattern for ORM. activesupport (1.4.2, 1.4.1, 1.3.1) Support and utility classes used by the Rails framework. cgi_multipart_eof_fix (2.1) Fix an exploitable bug in CGI multipart parsing which affects Ruby <= 1.8.5 when multipart boundary attribute contains a non-halting regular expression string. daemons (1.0.7, 1.0.5, 1.0.4, 1.0.2) A toolkit to create and control daemons in different ways eventmachine (0.7.2, 0.7.0) Ruby/EventMachine socket engine library fastercsv (1.2.0, 1.1.0) FasterCSV is CSV, but faster, smaller, and cleaner. fastthread (1.0) Optimized replacement for thread.rb primitives ferret (0.11.4) Ruby indexing library. gem_plugin (0.2.2, 0.2.1) A plugin system based only on rubygems that uses dependencies only mongrel (1.0.1, 0.3.13.4) A small fast HTTP library and server that runs Rails, Camping, Nitro and Iowa apps. mongrel_cluster (0.2.1) Mongrel plugin that provides commands and Capistrano tasks for managing multiple Mongrel processes. mysql (2.7) MySQL/Ruby provides the same functions for Ruby programs that the MySQL C API provides for C programs. piston (1.3.3) Piston is a utility that enables merge tracking of remote repositories. rails (1.2.3, 1.1.6) Web-application framework with template engine, control-flow layer, and ORM. rake (0.7.3, 0.7.1) Ruby based make-like utility. sources (0.0.1) This package provides download sources for remote gem installation swiftiply (0.5.1) A fast clustering proxy for web applications.

  Read the article

• NFS headaches with FreeBSD 4.9

  - by Ernie

  Once upon a time, this used to work, and I kept the configuration the same, but... now nothing. I'm just trying to get an NFS server set up on a FreeBSD 4.9 server. The process should be about as complicated as this: Add this entry to /etc/exports: /var/home /var/vpopmail/domains -maproot=root XXX.XX.XX.XXX Execute this: portmap nfsd -u -t -n 4 mountd -r Then this should work, regardless of network and firewall issues: showmount -e localhost But showmount -e localhost fails with the following error: RPC: Port mapper failure showmount: can't do exports rpc And even if I kill off the NFS daemon, and try a rpcinfo -p localhost, I get this error: rpcinfo: can't contact portmapper: rpcinfo: RPC: Unable to receive; errno = Connection reset by peer The portmapper is still running. Why the heck does nothing work as if it isn't? Edit to add: FYI: Sockstat gives me this: $ sockstat |egrep "(nfsd|portmap)" root nfsd 86310 3 udp4 *:2049 *:* root nfsd 86310 4 udp4 *:973 *:* root portmap 45920 0 tcp4 *:111 *:* Then, at a later time (say, 5 minutes) it's as if nfsd isn't acting as a server: $ sockstat |egrep "(nfsd|portmap)" root portmap 45920 0 tcp4 *:111 *:* But the nfs daemon is still running: $ ps ax |grep nfsd 86311 ?? I 0:00.00 nfsd: server (nfsd) 86312 ?? I 0:00.00 nfsd: server (nfsd) 86313 ?? I 0:00.00 nfsd: server (nfsd) 86314 ?? I 0:00.00 nfsd: server (nfsd)

  Read the article

• Log of cron actions on OS X

  - by Doug Harris

  Does the cron which comes with OS X log its actions anywhere? I'm not looking for output of any particular cron job, but rather log of what cron is doing. On a couple linux machines I've checked, there's /var/log/cron which has contents like: Apr 26 11:00:01 localhost crond[27755]: (root) CMD (/root/bin/mysql-backup) Apr 26 11:01:01 localhost crond[27892]: (root) CMD (run-parts /etc/cron.hourly) Apr 26 11:07:01 localhost crond[28138]: (root) CMD (/usr/local/bin/python /home/ user1/scripts/pythonscript.py) Apr 26 11:18:18 localhost crontab[28921]: (user2) LIST (user2) Apr 26 11:18:22 localhost crontab[28929]: (user2) BEGIN EDIT (user2) Apr 26 11:18:59 localhost crontab[28929]: (user2) REPLACE (user2) This shows when jobs ran, when users viewed or edited crontabs, etc. This stuff is nowhere that I've found on my Snow Leopard machine.

  Read the article

< Previous Page | 89 90 91 92 93 94 95 96 97 98 99 100  | Next Page >