Search Results

Search found 8056 results on 323 pages for 'external'.

Page 94/323 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• Recover files from NTFS drive with bad sectors

  - by Martin

  A few nights ago I have created a backup of my data on an external 500 GB NTFS USB hard drive. I have then formatted my computer, reinstalled Ubuntu and started transferring back the data from the external HDD. Unfortunately some files have became corrupted and Ubuntu is unable to copy them over. The same issue happens if I login using Windows 7. Disk Utility detects with SMART that there are "a few bad sectors". Some of files are perfectly intact, but other files cannot be accessed (nor read, copied...) although they are displayed within nautilus and show the correct file size. Is there anything I can do to recover this data? I have thought of using TestDisk but this utility seems more useful for repairing lost partitions or deleted files. I have also thought of using ddrescue so I could at least have a low level copy of the disk but I am not sure what use to make of it in order to recover the data!!!

  Read the article

• Unit testing - getting started

  - by higgenkreuz

  I am just getting started with unit testing but I am not sure if I really understand the point of it all. I read tutorials and books on it all, but I just have two quick questions: I thought the purpose of unit testing is to test code we actually wrote. However, to me it seems that in order to just be able to run the test, we have to alter the original code, at which point we are not really testing the code we wrote but rather the code we wrote for testing. Most of our codes rely on external sources. Upon refactoring our code however, even it would break the original code, our tests still would run just fine, since the external sources are just muck-ups inside our test cases. Doesn't it defeat the purpose of unit testing? Sorry if I sound dumb here, but I thought someone could enlighten me a bit. Thanks in advance.

  Read the article

• Sound plays from laptop speakers only even when headphones are connected

  - by Ankush N Nayak

  I'm using a Dell Vostro 1014 laptop with Ubuntu 11.10. From the time I had Ubuntu 9.04, sound comes from the laptop speakers only even when I plug in earphones or external speakers. Also, if an external microphone plugged in, it does not work. Dell even replaced my motherboard to check for hardware issues but the problem persists. So it is definitely not a hardware issue. The sound plays perfectly through the headphones in the pre-boot diagnostics. So I figure, this must be a problem with Ubuntu not recognizing my sound card. Please try to give a solution for this problem.

  Read the article

• Why doesn't my graphic card software support 1280*1024?

  - by Allwar

  Hi, I have an external monitor which is an 20" 1280*1024. In windows 7 it works fine with that resolution but in ubuntu it can't. Example: In windows I connect it and activates it, done. In ubuntu I connect and the only resolution that is available is the ones my laptop screen support, 12" 1366*768. My laptop is an asus 1201n. If I force it to use 1280*1024 both screen crashes and i have to force a reboot. When I force it I only force the external monitor, the laptop is already at maximum 1366*768. I connect it throw VGA. ((The graphic card supports 1280*1024 in windows 7, #Fail)) alvar@alvars-laptop:~$ disper -l display DFP-0: HSD121PHW1 resolutions: 320x175, 320x200, 360x200, 320x240, 400x300, 416x312, 512x384, 640x350, 576x432, 640x400, 680x384, 720x400, 640x480, 720x450, 640x512, 700x525, 800x512, 840x525, 800x600, 960x540, 832x624, 1024x768, 1366x768 display CRT-0: CRT-0 resolutions: 320x240, 400x300, 512x384, 680x384, 640x480, 800x600, 1024x768, 1152x864, 1360x768

  Read the article

• Changing internal home network ip address for connected devices

  - by oshirowanen

  I have a few computers at home. For each of the computers, I can see the internal home network ip address on any given device by typing in ifconfig in the terminal. If the device is connected to the home network via ethernet connection or via the built-in wireless connections in laptops, the internal ip address for each of the devices seems to be 192.168.0.X. However, when I connect one of the devices using an external usb modem wireless adapter, which connects to the home network through wireless, when I check the ip address via ifconfig, for some reason it gets assigned 192.168.42.X instead. Why are the ethernet and build in wireless connections getting 192.168.0.X, but the external usb wireless adapter gets 192.168.42.X? Most importantly, is it possible to force it to get an internal ip address of 192.168.0.X?

  Read the article

• Protect js code from being stolen

  - by Kaidul Islam Sazal

  I have developed an web app with jquery,html-css markup which would be an premium web app. So I have to ensure the security of the code from being stolen.But as all these are client side,so there is no 100% secure way to protect them.But I want to make them harder to steal.For this I did : I have disabled the right click button of mouse I have minified and obfuscated the code. I have used js code to add external js file and obfuscated the code so that none can understand the name of the external js file I have created a index.html file in the js folder so that none can get access the js folder Do you think all these are enough to make stealing harder? Or any suggestion/advice for me?

  Read the article

• MAAS and Openstack Network

  - by user281985

  Trying to figure out the best way for openstack and MASS networks to co-exist. Assuming MAAS used 10.0.0.0/24 for provisioning of various openstack nodes, once openstack, with quantum, is deployed should 10.0.0.0 be used as management network, external network, both or discarded? Reason for the question being that I ran a deployment where openstack used 10.0.0.0 as its management network, MAAS dhcp and dns were active; however, I could only access VMs through namespace and was not able to utilize MAAS's dhcp to assign floating IP. (VMs network was through an internal bridge 10.10.10.10, and external bridge was using the same interface as MAAS.) Any thoughts or ideas are appreciated.

  Read the article

• ZipStorer - A Pure C# Class to Store Files in Zip

  Small C# class to store and extract uncompressed and deflated files in new or existing Zip files, without any external library

  Read the article

• Online Code Editor [closed]

  - by Velvet Ghost

  The major online IDEs are hosted on the service provider's server. Examples are Kodingen, Cloud9, ShiftEdit. Hence they would be unavailable if the external server was down for some reason, and I prefer to do my computing on my own computer anyway. Does anyone know of an online IDE or editor (preferably just an editor - a simple implementation of the Ace or CodeMirror JS editors) which can be downloaded and run on localhost (on a local LAMP server)? I've found two so far - Eclipse Orion and Wiode, but I don't like either of them very much, and I'm looking for alternatives. Also suitable are browser extensions which run natively on the browser (offline) without going to some external site. An example would be SourceKit for Chrom(e/ium).

  Read the article

• Windows 7 Virtual PC - &ldquo;RPC server unavailable&rdquo;

  - by Kelly Jones

  I use Windows 7 Virtual PC on my current project and I often bring home the files, so I can work some in the evenings.  Since my VHDs are large, I’ll only copy the undo disks, saved state, and virtual machine config files from my external drive.  I copy them to a small portable drive and once I get home, I’ll copy them to a large external drive. I’ve done this for over a year, but recently I started getting an error when I tried to start the VPC after the copying was finished.  It would open the initial window with the progress bar, but eventually the bar would stop, turn red, and then the error “RPC server unavailable” would appear.  When I first started seeing these, I’d try again, but no luck. After some testing, it turns out that my small portable drive is apparently going bad, so it was corrupting the files.  Lucky for me, that I never overwrote my good copies with corrupted copies, at least not at both the office and at home.

  Read the article

• Uninstalling GRUB from MacBook Air

  - by James Brooke

  So... I have a MacBook Air and I recently tried to install Ubuntu on my external HD. I booted Ubuntu from a flash drive and everything had gone fine. I turned off my computer and when I turned it on again I got a message of error and a "grub rescue" line to enter some code. I rebooted holding the "option" key and I selected the Mac partition and everything is fine with my system, but every time I start my system and I don't hold the "option" key, I get the same error and the grub rescue message. I just want things to go back to normal, as they were before I installed Ubuntu on my external HD (which, btw, presented a message that said there was no boot loader). What do I do?

  Read the article

• USB Drive Warm Boot Issue. Cold boot = Perfect. Warm boot = "No boot sector found on USB device"

  - by Dan

  I'm experiencing a boot/reboot quirk similar to, yet somewhat different from others posted here. I have two Western Digital "Passport" external USB2 drives (160GB and 320GB) with Ubuntu 11.10 installed. The BIOS on my laptop is set to boot USB drives before the internal drive, and it works well. Either drive will cold-boot Ubuntu 11.10 perfectly. However, at times the computer must be restarted (warm boot) to have software updates or other changes take effect. When I warm-boot the computer, the computer goes through its normal shutdown/restart, then the usual BIOS tests, at which time the USB drive is selected momentarily (as normal), and that's when the trouble starts. I get a "No boot sector found on USB device", and the computer proceeds to boot Windows from the internal drive. If I press F12 early during the restart sequence (allows manual selection of the boot sequence), USB is still shown before the internal drive on the sequence list (as it should be). If I highlight "USB" and press ENTER, I still get a "No boot sector..." error message, but the external USB drive then proceeds to boot Ubuntu normally. I have a third external USB drive (Western Digital 160 GB Media Center) that cold-boots and warm-boots perfectly, so I know everything in the computer is set up properly. It also tells me Ubuntu is set up correctly on the drives, as all three drives were done identically, and at the same time. I've tried formatting the Passport drives NTFS and FAT32, but it didn't change anything. If I power-down the computer, then start it up again, it will boot Ubuntu from either of the Passport drives perfectly - every time. It's as if during a warm boot the Passport drives are somehow looking for the boot loader in the wrong location on the drive - yet either drives works when booting from a cold start. Not a show-stopper .. but frustrating. Computer is a Dell XPS M1530, A12 BIOS (latest), but I don't think the computer plays into the issue because one of the three drives works at all times. It's only the two WD Passport models at issue here. Thanks!

  Read the article

• How can I fix broken i915 drivers for Intel GPUs?

  - by Alen Mujezinovic

  I've got troubles getting the i915 drivers to work correctly on my laptop (HP Pavilion DM4 2101ea). Specifically, the laptop screen goes black and stays black after the splash graphic when booting both from USB key and from harddrive. To get anything on to the display after the splash screen I have to boot either with acpi=off nomodeset i915.modeset=0 I'd rather not turn ACPI off because I like my fans spinning and nomodeset is a bit overkill, so for now I'm booting with i915.modeset=0. Unfortunately, this turns off KMS and my current maximum resolution on the laptop screen is fixed to 1024x768 instead of its real capability. When not setting any of the above boot flags and I plug in an external monitor, the external monitor works fine. When booting with the flags, the external monitor works fine too, but can only do 1024x768 and can't do anything else than mirroring the laptop display. I did upgrade the i915 drivers from 2.17 that ship with Precise to 2.19 which are the most recent ones but without luck of getting anything to display. Here's my lspci output: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 08:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) Here's lshw -C video *-display UNCLAIMED description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:c0000000-c03fffff memory:b0000000-bfffffff ioport:4000(size=64) Both outputs are generated after booting with i915.modeset=0. Here's a complete Xorg.log file from a boot into a black screen: https://gist.github.com/479ce06454e47d6123e1 The graphics card is a Intel HD 3000 integrated GPU. I've never had problems with Intel hardware on Ubuntu before so this is very surprising. If you could provide a method to make i915 work, suggest alternative drivers a way to boot with i915.modeset=0 but higher resolutions and KMS on or explain what is happening and how to fix it I'll give you an answer badge. :) Thanks

  Read the article

• Deploying a very simple application

  - by vanna

  I have a very simple working console application written in C++ linked with a light static library. It is just for testing purposes. Now that the coding part is done, I would like to know the process of actually deploying the program. I wrote a very basic CMakeLists.txt that create makefiles or VS projects to build the sources. I also have a program that calls the static library in order to make some google tests. To me, the distribution of this application goes like this : to developpers : the src directory with the CMakeLists.txt file (multi-platform distribution) with a README.txt and an INSTALL.txt to users : the executable and a README.txt git repo : everything mentionned above plus the sources for testing and the gtest external lib A this point : considering the complexity of my application, am I doing it right ? Is there any reference that would formalize this deployment process so I can get better and go further ? Say I would like to add dynamic libraries that can be updated, external libraries like boost : how should I package this to deploy it in a professionnal way ?

  Read the article

• Keyboard Mouse Problem

  - by Zachary K

  I just installed Ubuntu on my laptop (Core 2 Duo Sony Vaio) and am having a problem with the external keyboard and mouse. When I first logged in the left mouse button does not work, this can be solved by unplugging the external keyboard/mouse's USB connector and then plugging it back in again. But Then randomly other problems happen. (Shift gets stuck, keys don't work etc) The keyboard and mouse are a generic brand wireless (A4 Tech) that I got for cheap. Both work OK under windows so this is a major pain.

  Read the article

• Is it a good approach to rely on 3rd party software ( not library )?

  - by gunbuster363

  We have program using a call to a winzip program or 7zip commandline tool to zip some files. Once I accidentally uninstall winzip on my computer and making one of our program( created by the programmer already left ) crashed. So we cannot uninstall the winzip program. Now I've come to a point which I need to decide a external tool for gzip in windows or I make a java program which I can call to gzip the file. Obviously a external tool such as 7z is convenient and we can avoid some extra coding with java. On the contrary, if 7z is uninstalled accidentally, our program will crash. What do you think?

  Read the article

• How well does Intel 3000 HD work on Ubuntu?

  - by Simon

  Right now i have notebook with Nvidia 8400M GS (I know, it's not good card) and it's impossible to work normally when i'll plugin external monitor (1920x1080). Windows 7 can deal with it without problems (1440x900 on notebook + 1920x1080 external). On Ubuntu i have to choose one screen and turn off the second one. Even with only one screen Ubuntu (Unity or even Gnome3) sometimes hangs for a while, I've not found solution for this yet, but nevermind, it's probably because of my card or/and nvidia's drivers. I'm going to buy new PC, but for now only with integrated Intel 3000HD, and my question is: Should i expect similar problems with this card? Here i've found link to Intel's webpage about drivers - "only community develop them", and i'm a bit concerned. I'll use then only one monitor (the bigger one), but how well does those driver work? Are there any performance tests?

  Read the article

• Why are Back In Time snapshots so large?

  - by Chethan S.

  I just backed up the contents of my home partition onto my external hard drive using Back In Time. I browsed to the backed up contents in the external drive and under properties it showed me the size as 9.6 GB. As I read that in next snapshots I create, Back In Time does not backup everything but creates hard links for older contents and saves newer contents, I wanted to test it. So I copied two small files into my home partition and ran 'Take Snapshot' again. The operation completed within a minute - first it checked previous snapshot, assessed the changes, detected two new files and synced them. After this when I browsed to the backed up contents, I was surprised to see the newer and older backup taking up 9.6 GB each. Isn't this a waste of hard drive space? Or did I interpret something wrongly?

  Read the article

• A real noob question

  - by Jaymz

  I have a Hp mini netbook that has been wiped clean, there is nothing other than the bios on it, it has no DVD and I don't have an external DVD. I can change the boot order to boot from a usb device. I have downloaded ubuntu-12.04.1-desktop-i386 I have one of these http://www.kikatek.com/P100600/34609-IOMEGA-250gb-Select-Portable-HDD-2-5-USB?source=froogle currently formatted to NTFS but I can format to exFAT I have tried Linuxlive USB creator, all that managed to do was dual boot the desktop pc that I'm working off, and when booting on the wiped clean netbook, just left me with a black screen with a blinking cursor I have also tried Unetbootin, this managed to change my 'My Computer' icon to Install Ubuntu (C:) and now again, my desktop pc dual boots with the Wubi software, the Unetbootin, wouldn't let me select my external drive to write to Please I'm a complete idiot, i need a super idiots guide to doing this Regards Jaymz

  Read the article

• Installing Ubuntu 64bit on Acer netbook causes black screen.

  - by big-marc

  Trying to install Ubuntu on an external usb 3 500 Gb hard-drive. I am using an Acer netbook. the specs are: amd c-60 1ghz with 4 Gb ram. I have a 64 bits windows 7 no2 installed. I downloaded the ubuntu-12.04.1-alternate-amd64 ISO and used the universal usb installer to install the Ubuntu When I reboot on the external hard drive, I have the language selection, then the menu...I choose to install...and I get a black flickering screen. and nothing more. Any suggestion?

  Read the article

• Delete blank row in dropdownlist or select default value in infopath dropdown

  - by KunaalKapoor

  Regular Dropdown (Pulling from DataSource)1. Double click on dropdown field in the data source.2. Select Fx button for Default value.3. Select Insert field or group.4. Select secondary xml from data source.5. Select “value” and click on ok.For a cascading dropdown:You have to add the rule and follow these steps,1. Rules -> ‘Add’ - > ‘Add Action’.2. Select ‘Set a field value’ option in first dropdown in Action.3. Select your field with help of ‘Select a Field or Group’ option in ‘Field’.4. Select your external data source list value in ‘Value’.This rule you can apply in OnLoad or whenever you will get external data source values.

  Read the article

• New Endpoint options that enable additional application patterns

  - by kaleidoscope

  The two communication-related capabilities:  a) inter-role communication and b) external endpoints on worker roles enable new application patterns in Windows Azure-hosted services. Inter-role Communication - A common application pattern enabled by this is client-server, where the server could be an application such as a database or a memory cache. External Endpoints on Worker Roles - A common application type enabled by this is a self-hosted Internet-exposed service, such as a custom application server. For further details click on the following link: http://blogs.msdn.com/windowsazure/archive/2009/11/24/new-endpoint-options-enable-additional-application-patterns.aspx   Tinu, O

  Read the article

• Has anyone got "Creative Soundblaster X-Fi Surround 5.1 Pro" - (usb Interface) installed?

  - by Vivek Sharma

  Has anyone tried this external usb sound blaster on ubuntu. http://us.store.creative.com/Sound-Blaster-XFi-Surround-5.1-Pro/M/B0044DEDCA.htm. I have bought M-Audio Bx5a deluxe Studio Monitors for my T61. I think the onboard Intel HD sound card will not do any justice to these speakers. So I am looking for an external sound interface. I particularly liked this one as it is not very expensive and it has a volume control (speaker lack a central-front volume knob). Has anyone been able to use this on ubuntu. Also, if anyone would like to recommend me another option?

  Read the article

• FTP won't open a connection to client

  - by Ben

  I am running Windows server 2008 on Ubuntu server 12.04.1 via devstack and I am trying to download a file from an ftp server using the windows command line ftp client. When I run the ftp get command I get the following error message: 500 I won't open a connection to 10.0.0.2 (only to XX.XX.XX.XX) 425 No data connection 10.0.0.2 is the internal IP address of the instance, whereas XX.XX.XX.XX is the external address. Is there anyway to make the ftp client use the external address for the data connection, or alternatively have the client establish the connection? Thanks

  Read the article

• No options for sound output

  - by Chef Flambe

  Newbie here. Trying out Ubuntu for kicks. I have a 10.04 Ubuntu system dual booting on my Windows 7 laptop, fully updated, an Asus A53S. I have an external Samsung monitor/tv hooked up via HDMI. I'm getting sound from the external monitor fine when using Win7 but can't get anything with Ubuntu. I've read threads here about similar stuff and they say go check my sound options but I don't have any additional options than the one listed - Internal Audio. What else can I check/do?

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >