port forwarding - Page 94

Allowing Skype through Squid proxy

- by Blue Gene

I have a squid proxy running on 192.168.1.2 on port 3000. with Squid i am able to connect to internet and browse websites but skype is not connecting even after i specified proxy server in it. In the skype configuration i mentioned it to use SOCKS5 through host 192.168.1.2 and port 3000. But still its not working.Port 443 is open in squid configuration. https is working ok as i can access gmail and bank payment sites,but skype can not access its server. acl Safe_ports port 443 # https acl SSL_ports port 443 also tried setting acl numeric_IPs dstdom_regex ^(([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)|(\[([0-9af]+)?:([0-9af:]+)?:([0-9af]+)?\])):443 acl Skype_UA browser ^skype http_access allow CONNECT numeric_IPS Skype_UA IPTABLES is set to accept all

Read the article

Having two FTP ports for the user

- by user1663896

I'm running vsftpd on RedHat 6.4 using TLS/SSL on port 990. It works great. I have been tasked to have my VSFTPD server running on unencrypted port 21 as well. This gives my users to either use clear text FTP on port 21 or TLS/SSL on port 990. I have tried the following in my vsftpd.conf file and did not work. listen_port=990 listen_port=21 In my config file it has the following SSL parameters: chroot_local_user=YES ssl_enable=YES allow_anon_ssl=NO anonymous_enable=NO anon_world_readable_only=NO force_local_data_ssl=NO force_local_logins_ssl=NO require_ssl_reuse=NO Can VSFTPD run on port 21 and 990? Thanks in advanced.

Read the article

No Sound in 12.04 on Acer TimelineX 3830TG

- by Fawkes5

When i first installed ubuntu 12.04 everything worked fine. All of a sudden my sound has stopped working!! This has happened before [like 2 days ago], however the next day it started working again. That may happen again...[I've already rebooted 5 times] My Sound Card is a HDA intel PCH My Sound Chip is Intel CougarPoint HDMI My machine is an Acer TimelineX 3830TG, heres my lcpci output 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4) 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 04) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 540M] (rev ff) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet (rev c0) 03:00.0 Network controller: Atheros Communications Inc. AR9287 Wireless Network Adapter (PCI-Express) (rev 01) 04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5116 PCI Express Card Reader (rev 01) 05:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 04) I'm running a dual boot with Windows 7, sound always works there. I've tried loading earlier kernels [3.2.0 ] but that hasn't helped. I've tried playing with alsamixer, unmuting and raising volume, doesn't work I've tried playing with pauvcontrol, doesnt work. Althought, strangely, when i play a song, under output i can see a bar moving implying that something is working, just the sound isn't getting through my speakers. Thus it might be a hardware problem. I've tried unistalling and reinstalling pulsaudio annd alsamixer, doesn't work [maybe made it worse...]. I've heard reverting back to kernel 3.0... works, but i'm reluctant to try that[i dont know much about kernels]. Thank you. Please tell me what other information you need. EDIT: My audio has started working again after another reboot. However this time im not connected to my external audio on startup. I will see if this is the issue next time i'm at home Edit: Connecting to external audio is not the problem.

Read the article

ubuntu 10.04: wlan0 No such device

- by AodhanOL

I am using a Dell xps l702x and I am using ubuntu 10.04 because I need to use f77 (don't ask) and I wasn't able to get it working on later versions of ubuntu. I cannot use the wifi at all. I have tried to fix it and have had limited success (changed the output from rfkill list all from Hard blocked: yes, to hard blocked: no). Here is the output from rfkill list all aodhan@aodhan-laptop:~$ rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no 2: dell-bluetooth: Bluetooth Soft blocked: no Hard blocked: no Here is the output from iwconfig: aodhan@aodhan-laptop:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. pan0 no wireless extensions. And here is the output from ifconfig -a: aodhan@aodhan-laptop:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 5c:f9:dd:3d:f2:f7 inet addr:192.168.1.17 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::5ef9:ddff:fe3d:f2f7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3417 errors:0 dropped:0 overruns:0 frame:0 TX packets:2894 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3317567 (3.3 MB) TX bytes:505049 (505.0 KB) Interrupt:30 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:720 (720.0 B) TX bytes:720 (720.0 B) pan0 Link encap:Ethernet HWaddr 7e:7e:e8:39:70:af BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) And finally, the output from lspci: 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:01.0 PCI bridge: Intel Corporation Sandy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.3 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c4b (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation Device 1246 (rev a1) 03:00.0 Network controller: Intel Corporation Device 008a (rev 34) 04:00.0 USB Controller: NEC Corporation Device 0194 (rev 04) 0a:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Please help me! Thank you in advance. Edit: Further info - this is a dual install with a windows 7 system as the other option. However, I can't access that until tomorrow (I won't have access to the windows 7 disc until then, and grub isn't letting me load it). Therefore, I can't be sure whether it still works on that or not. It used to, though.

Read the article

USB 3.0 randomly disconnecting and reconnecting

- by user1624552

I had an old laptop that died so I have bought a new one. I have taken the 2.5 SATA hard drive from the old laptop and I have put it into an external 2.5 SATA enclosure usb 3.0 and I connect it to the new laptop. My new laptop has Windows 8 64 bit installed. When I connect the external hard drive to the new laptop throught USB 3.0 port, it gets randomly disconnecting and reconnecting continuously, even when I am not using it. Also happens if I connect to another usb 3.0 port. Also I have observed that If I connect the external hard drive to a USB 2.0 port instead of an USB 3.0 port all work ok, no randomly disconnection and reconnection occurs. It only happens when I connect it to an USB 3.0 port. Some ideas to solve this issue?

Read the article

A simple demo for WDF Driver development

Access physical memory, I/O port in user mode

Read the article

Simple perl program failing to execute

- by yves Baumes

Here is a sample that fails: #!/usr/bin/perl -w # client.pl #---------------- use strict; use Socket; # initialize host and port my $host = shift || 'localhost'; my $port = shift || 55555; my $server = "10.126.142.22"; # create the socket, connect to the port socket(SOCKET,PF_INET,SOCK_STREAM,(getprotobyname('tcp'))[2]) or die "Can't create a socket $!\n"; connect( SOCKET, pack( 'Sn4x8', AF_INET, $port, $server )) or die "Can't connect to port $port! \n"; my $line; while ($line = <SOCKET>) { print "$line\n"; } close SOCKET or die "close: $!"; with the error: Argument "10.126.142.22" isn't numeric in pack at D:\send.pl line 16. Can't connect to port 55555! I am using this version of Perl: This is perl, v5.10.1 built for MSWin32-x86-multi-thread (with 2 registered patches, see perl -V for more detail) Copyright 1987-2009, Larry Wall Binary build 1006 [291086] provided by ActiveState http://www.ActiveState.com Built Aug 24 2009 13:48:26 Perl may be copied only under the terms of either the Artistic License or the GNU General Public License, which may be found in the Perl 5 source kit. Complete documentation for Perl, including FAQ lists, should be found on this system using "man perl" or "perldoc perl". If you have access to the Internet, point your browser at http://www.perl.org/, the Perl Home Page. While I am running the netcat command on the server side. Telnet does work.

Read the article

Python Socket Getting Connection Reset

- by Ian

I created a threaded socket listener that stores newly accepted connections in a queue. The socket threads then read from the queue and respond. For some reason, when doing benchmarking with 'ab' (apache benchmark) using a concurrency of 2 or more, I always get a connection reset before it's able to complete the benchmark (this is taking place locally, so there's no external connection issue). class server: _ip = '' _port = 8888 def __init__(self, ip=None, port=None): if ip is not None: self._ip = ip if port is not None: self._port = port self.server_listener(self._ip, self._port) def now(self): return time.ctime(time.time()) def http_responder(self, conn, addr): httpobj = http_builder() httpobj.header('HTTP/1.1 200 OK') httpobj.header('Content-Type: text/html; charset=UTF-8') httpobj.header('Connection: close') httpobj.body("Everything looks good") data = httpobj.generate() sent = conn.sendall(data) def http_thread(self, id): self.log("THREAD %d: Starting Up..." % id) while True: conn, addr = self.q.get() ip, port = addr self.log("THREAD %d: responding to request: %s:%s - %s" % (id, ip, port, self.now())) self.http_responder(conn, addr) self.q.task_done() conn.close() def server_listener(self, host, port): self.q = Queue.Queue(0) sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM) sock.bind( (host, port) ) sock.listen(5) for i in xrange(4): #thread count thread.start_new(self.http_thread, (i+1, )) while True: self.q.put(sock.accept()) sock.close() server('', 9999) When running the benchmark, I get totally random numbers of good requests before it errors out, usually between 4 and 500. Edit: Took me a while to figure it out, but the problem was in sock.listen(5). Because I was using apache benchmark with a higher concurrency (5 and up) it was causing the backlog of connections to pile up, at which point the connections started getting dropped by the socket.

Read the article

Is it possible to defer member initialization to the constructor body?

- by Kjir

I have a class with an object as a member which doesn't have a default constructor. I'd like to initialize this member in the constructor, but it seems that in C++ I can't do that. Here is the class: #include <boost/asio.hpp> #include <boost/array.hpp> using boost::asio::ip::udp; template<class T> class udp_sock { public: udp_sock(std::string host, unsigned short port); private: boost::asio::io_service _io_service; udp::socket _sock; boost::array<T,256> _buf; }; template<class T> udp_sock<T>::udp_sock(std::string host = "localhost", unsigned short port = 50000) { udp::resolver res(_io_service); udp::resolver::query query(udp::v4(), host, "spec"); udp::endpoint ep = *res.resolve(query); ep.port(port); _sock(_io_service, ep); } The compiler tells me basically that it can't find a default constructor for udp::socket and by my research I understood that C++ implicitly initializes every member before calling the constructor. Is there any way to do it the way I wanted to do it, or is it too "Java-oriented" and not feasible in C++? I worked around the problem by defining my constructor like this: template<class T> udp_sock<T>::udp_sock(std::string host = "localhost", unsigned short port = 50000) : _sock(_io_service) { udp::resolver res(_io_service); udp::resolver::query query(udp::v4(), host, "spec"); udp::endpoint ep = *res.resolve(query); ep.port(port); _sock.bind(ep); } So my question is more out of curiosity and to better understand OOP in C++

Read the article

Error when loading YAML config files in Rails

- by ZelluX

I am configuring Rails with MongoDB, and find a strange problem when paring config/mongo.yml file. config/mongo.yml is generated by executing script/rails generate mongo_mapper:config, and it looks like following: defaults: &defaults host: 127.0.0.1 port: 27017 development: <<: *defaults database: tc_web_development test: <<: *defaults database: tc_web_test From the config file we can see the objects development and test should both have a database field. But when it is parsed and loaded in config/initializers/mongo.db, config = YAML::load(File.read(Rails.root.join('config/mongo.yml'))) puts config.inspect MongoMapper.setup(config, Rails.env) the strange thing comes: the output of puts config.inspect is {"defaults"=>{"host"=>"127.0.0.1", "port"=>27017}, "development"=>{"host"=>"127.0.0.1", "port"=>27017}, "test"=>{"host"=>"127.0.0.1", "port"=>27017}} which does not contain database attribute. But when I execute the same statements in a plain ruby console, instead of using rails console, mongo.yml is parsed in a right way. {"defaults"=>{"host"=>"127.0.0.1", "port"=>27017}, "development"=>{"host"=>"127.0.0.1", "port"=>27017, "database"=>"tc_web_development"}, "test"=>{"host"=>"127.0.0.1", "port"=>27017, "database"=>"tc_web_test"}} I am wondering what may be the cause of this problem. Any ideas? Thanks.

Read the article

Spring: Bean fails to read off values from external Properties file when using @Value annotation

- by daydreamer

XML Configuration <beans xmlns="http://www.springframework.org/schema/beans" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:util="http://www.springframework.org/schema/util" xsi:schemaLocation="http://www.springframework.org/schema/beans http://www.springframework.org/schema/beans/spring-beans-3.0.xsd http://www.springframework.org/schema/util http://www.springframework.org/schema/util/spring-util.xsd"> <util:properties id="mongoProperties" location="file:///storage/local.properties" /> <bean id="mongoService" class="com.business.persist.MongoService"></bean> </beans> and MongoService looks like @Service public class MongoService { @Value("#{mongoProperties[host]}") private String host; @Value("#{mongoProperties[port]}") private int port; @Value("#{mongoProperties[database]}") private String database; private Mongo mongo; private static final Logger LOGGER = LoggerFactory.getLogger(MongoService.class); public MongoService() throws UnknownHostException { LOGGER.info("host=" + host + ", port=" + port + ", database=" + database); mongo = new Mongo(host, port); } public void putDocument(@Nonnull final DBObject document) { LOGGER.info("inserting document - " + document.toString()); mongo.getDB(database).getCollection(getCollectionName(document)).insert(document, WriteConcern.SAFE); } I write my MongoServiceTest as public class MongoServiceTest { @Autowired private MongoService mongoService; public MongoServiceTest() throws UnknownHostException { mongoRule = new MongoRule(); } @Test public void testMongoService() { final DBObject document = DBContract.getUniqueQuery("001"); document.put(DBContract.RVARIABLES, "values"); document.put(DBContract.PVARIABLES, "values"); mongoService.putDocument(document); } and I see failures in tests as 12:37:25.224 [main] INFO c.s.business.persist.MongoService - host=null, port=0, database=null java.lang.NullPointerException at com.business.persist.MongoServiceTest.testMongoService(MongoServiceTest.java:40) Which means bean was not able to read the values from local.properties local.properties ### === MongoDB interaction === ### host="127.0.0.1" port=27017 database=contract How do I fix this? update It doesn't seem to read off the values even after creating setters/getters for the fields. I am really clueless now. How can I even debug this issue? Thanks much!

Read the article

C: incompatible types in assignment

- by The.Anti.9

I'm writing a program to check to see if a port is open in C. One line in particular copies one of the arguments to a char array. However, when I try to compile, it says: error: incompatible types in assignment Heres the code. The error is on the assignment of addr #include <sys/socket.h> #include <sys/time.h> #include <sys/types.h> #include <arpa/inet.h> #include <netinet/in.h> #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <netdb.h> #include <stdlib.h> #include <string.h> #include <unistd.h> int main(int argc, char **argv) { u_short port; /* user specified port number */ char addr[1023]; /* will be a copy of the address entered by u */ struct sockaddr_in address; /* the libc network address data structure */ short int sock = -1; /* file descriptor for the network socket */ port = atoi(argv[1]); addr = strncpy(addr, argv[2], 1023); bzero((char *)&address, sizeof(address)); /* init addr struct */ address.sin_addr.s_addr = inet_addr(addr); /* assign the address */ address.sin_port = htons(port); /* translate int2port num */ sock = socket(AF_INET, SOCK_STREAM, 0); if (connect(sock,(struct sockaddr *)&address,sizeof(address)) == 0) { printf("%i is open\n", port); } if (errno == 113) { fprintf(stderr, "Port not open!\n"); } close(sock); return 0; } I'm new to C, so I'm not sure why it would do this.

Read the article

Unit testing a method with many possible outcomes

- by Cthulhu

I've built a simple~ish method that constructs an URL out of approximately 5 parts: base address, port, path, 'action', and a set of parameters. Out of these, only the address part is mandatory, the other parts are all optional. A valid URL has to come out of the method for each permutation of input parameters, such as: address address port address port path address path address action address path action address port action address port path action address action params address path action params address port action params address port path action params andsoforth. The basic approach for this is to write one unit test for each of these possible outcomes, each unit test passing the address and any of the optional parameters to the method, and testing the outcome against the expected output. However, I wonder, is there a Better (tm) way to handle a case like this? Are there any (good) unit test patterns for this? (rant) I only now realize that I've learned to write unit tests a few years ago, but never really (feel like) I've advanced in the area, and that every unit test is a repeat of building parameters, expected outcome, filling mock objects, calling a method and testing the outcome against the expected outcome. I'm pretty sure this is the way to go in unit testing, but it gets kinda tedious, yanno. Advice on that matter is always welcome. (/rant) (note) christmas weekend approaching, probably won't reply to suggestions until next week. (/note)

Read the article

PHP Infine Loope Problem

- by Ashwin

Read the article

Python client / server question

- by AustinM

I'm working on a bit of a project in python. I have a client and a server. The server listens for connections and once a connection is received it waits for input from the client. The idea is that the client can connect to the server and execute system commands such as ls and cat. This is my server code: import sys, os, socket host = '' port = 50105 s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) s.bind((host, port)) print("Server started on port: ", port) s.listen(5) print("Server listening\n") conn, addr = s.accept() print 'New connection from ', addr while (1): rc = conn.recv(5) pipe = os.popen(rc) rl = pipe.readlines() file = conn.makefile('w', 0) file.writelines(rl[:-1]) file.close() conn.close() And this is my client code: import sys, socket s = socket.socket(socket.AF_INET, socket.SOCK_STREAM) host = 'localhost' port = input('Port: ') s.connect((host, port)) cmd = raw_input('$ ') s.send(cmd) file = s.makefile('r', 0) sys.stdout.writelines(file.readlines()) When I start the server I get the right output, saying the server is listening. But when I connect with my client and type a command the server exits with this error: Traceback (most recent call last): File "server.py", line 21, in <module> rc = conn.recv(2) File "/usr/lib/python2.6/socket.py", line 165, in _dummy raise error(EBADF, 'Bad file descriptor') socket.error: [Errno 9] Bad file descriptor On the client side, I get the output of ls but the server gets screwed up.

Read the article

Python server open all ports

- by user1670178

I am trying to open all ports using this code, why can I not create a loop to perform this function? http://www.kellbot.com/2010/02/tutorial-writing-a-tcp-server-in-python/ #!/usr/bin/python # This is server.py file ##server.py from socket import * #import the socket library n=1025 while n<1050: ##let's set up some constants HOST = '' #we are the host PORT = n #arbitrary port not currently in use ADDR = (HOST,PORT) #we need a tuple for the address BUFSIZE = 4096 #reasonably sized buffer for data ## now we create a new socket object (serv) ## see the python docs for more information on the socket types/flags serv = socket( AF_INET,SOCK_STREAM) ##bind our socket to the address serv.bind((ADDR)) #the double parens are to create a tuple with one element serv.listen(5) #5 is the maximum number of queued connections we'll allow serv = socket( AF_INET,SOCK_STREAM) ##bind our socket to the address serv.bind((ADDR)) #the double parens are to create a tuple with one element serv.listen(5) #5 is the maximum number of queued connections we'll allow print 'listening...' n=n+1 conn,addr = serv.accept() #accept the connection print '...connected!' conn.send('TEST') conn.close() How do I make this work so that I can specify input range and have the server open all ports up to 65535? #!/usr/bin/python # This is server.py file from socket import * #import the socket library startingPort=input("\nPlease enter starting port: ") startingPort=int(startingPort) #print startingPort def connection(): ## let's set up some constants HOST = '' #we are the host PORT = startingPort #arbitrary port not currently in use ADDR = (HOST,PORT) #we need a tuple for the address BUFSIZE = 4096 #reasonably sized buffer for data def socketObject(): ## now we create a new socket object (serv) serv = socket( AF_INET,SOCK_STREAM) def bind(): ## bind our socket to the address serv = socket( AF_INET,SOCK_STREAM) serv.bind((ADDR)) #the double parens are to create a tuple with one element serv.listen(5) #5 is the maximum number of queued connections we'll allow serv = socket( AF_INET,SOCK_STREAM) print 'listening...' def accept(): conn,addr = serv.accept() #accept the connection print '...connected!' conn.send('TEST') def close(): conn.close() ## Main while startingPort<65535: connection() socketObject() bind() accept() startingPort=startingPort+1

Read the article

PHP Infine Loop Problem

- by Ashwin

Read the article

SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

- by WarpKid

Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

Read the article

Can't remotely connect through SQL Server Management Studio

- by FAtBalloon

I have setup a SQL Server 2008 Express instance on a dedicated Windows 2008 Server hosted by 1and1.com. I cannot connect remotely to the server through management studio. I have taken the following steps below and am beyond any further ideas. I have researched the site and cannot figure anything else out so please forgive me if I missed something obvious, but I'm going crazy. Here's the lowdown. The SQL Server instance is running and works perfectly when working locally. In SQL Server Management Studio, I have checked the box "Allow Remote Connections to this Server" I have removed any external hardware firewall settings from the 1and1 admin panel Windows firewall on the server has been disabled, but just for kicks I added an inbound rule that allows for all connections on port 1433. In SQL Native Client configuration, TCP/IP is enabled. I also made sure the "IP1" with the server's IP address had a 0 for dynamic port, but I deleted it and added 1433 in the regular TCP Port field. I also set the "IPALL" TCP Port to 1433. In SQL Native Client configuration, SQL Server Browser is also running and I also tried adding an ALIAS in the I restarted SQL server after I set this value. Doing a "netstat -ano" on the server machine returns a TCP 0.0.0.0:1433 LISTENING UDP 0.0.0.0:1434 LISTENING I do a port scan from my local computer and it says that the port is FILTERED instead of LISTENING. I also tried to connect from Management studio on my local machine and it is throwing a connection error. Tried the following server names with SQL Server and Windows Authentication marked in the database security. ipaddress\SQLEXPRESS,1433 ipaddress\SQLEXPRESS ipaddress ipaddress,1433 tcp:ipaddress\SQLEXPRESS tcp:ipaddress\SQLEXPRESS,1433

Read the article

Freeradius authentication failed for unknown reason

- by Moein7tl

I followed this instruction to force freeradius to use mysql database. and run freeradius in debug mod. but it rejects all authentication. mysql database : mysql select * from radcheck; +----+----------+-----------+----+---------+ | id | username | attribute | op | value | +----+----------+-----------+----+---------+ | 1 | test | Password | == | test123 | | 2 | test | Auth-Type | == | Local | +----+----------+-----------+----+---------+ 2 rows in set (0.02 sec) radtest command : # radtest test test123 localhost 0 testing123 Sending Access-Request of id 235 to 127.0.0.1 port 1812 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0x00000000000000000000000000000000 rad_recv: Access-Reject packet from host 127.0.0.1 port 1812, id=235, length=20 radiusd debug mod log: rad_recv: Access-Request packet from host 127.0.0.1 port 51034, id=235, length=74 User-Name = "test" User-Password = "test123" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Message-Authenticator = 0xbf111cbbae24fb0f0a558bfa26f53476 # Executing section authorize from file /usr/local/etc/raddb/sites-enabled/default +- entering group authorize {...} ++[preprocess] returns ok ++[chap] returns noop ++[mschap] returns noop ++[digest] returns noop [suffix] No '@' in User-Name = "test", looking up realm NULL [suffix] No such realm "NULL" ++[suffix] returns noop [eap] No EAP-Message, not doing EAP ++[eap] returns noop ++[files] returns noop ++[expiration] returns noop ++[logintime] returns noop [pap] WARNING! No "known good" password found for the user. Authentication may fail because of this. ++[pap] returns noop ERROR: No authenticate method (Auth-Type) found for the request: Rejecting the user Failed to authenticate the user. Using Post-Auth-Type Reject # Executing group from file /usr/local/etc/raddb/sites-enabled/default +- entering group REJECT {...} [attr_filter.access_reject] expand: %{User-Name} - test attr_filter: Matched entry DEFAULT at line 11 ++[attr_filter.access_reject] returns updated Delaying reject of request 20 for 1 seconds Going to the next request Waking up in 0.9 seconds. Sending delayed reject for request 20 Sending Access-Reject of id 235 to 127.0.0.1 port 51034 Waking up in 4.9 seconds. Cleaning up request 20 ID 235 with timestamp +4325 Ready to process requests. where is the problem and how should I solve it?

Read the article

cygwin sshd times out for remote login

- by reve_etrange

I have configured SSHD using Cygwin on Windows 7. I have checked and double-checked all of the following points: Port forwarding is correctly configured Windows Firewall is configured to pass port 22 Local login attempts (using Cygwin SSH) succeed sshd_config has UseDNS No Using nmap from remote machine confirms port 22 is accessible /etc/passwd and /etc/group are correctly populated However, remote login attempts time out. This includes from the local network. user@host:~$ ssh -vvv [email protected] OpenSSH_5.5p1 Debian-4ubuntu6, OpenSSL 0.9.8o 01 Jun 2010 debug1: Reading configuration data /home/user/.ssh/config debug1: Applying options for * debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to the.ip.add.ress [the.ip.add.ress] port 22. debug1: connect to address the.ip.add.ress port 22: Connection timed out ssh: connect to the.ip.add.ress port 22: Connection timed out No messages are logged to /var/log/sshd.log. I suspect that there is a permissions issue with a particular file somewhere, however I have checked the permissions of all my Cygwin binaries, DLLs and the particular files important to Cygwin sshd, including all of: /etc/passwd /etc/group /var /var/log/sshd.log /var/empty Others who have reported this or similar errors appear to have missed one of the points enumerated above. Can anyone point me to a possible solution?

Read the article

IIS running but not serving content

- by Kyle

I have an internal dev server running Windows 2k8 R2 with the Web and FTP Server roles set up which won't serve any content at all. Trying to connect from another host via telnet yields 'connection failed': c:\>telnet devserver 80 Connecting To devserver...Could not open connection to the host, on port 80: Conn ect failed Using netstat -an | find "80" on the dev server returns no connections on port 80 (a few on 1801, etc) tcpview confirms this, listing no open connections on port 80. The following services related to the Web role are running: World Wide Web Publishing Service Application Host Helper Service Microsoft FTP Service (ftp connections to port 21 are granted) Windows Process Activation Service The default website bindings are: Type Host Name Port IP Address Binding Information http 80 * net.tcp 808:* net.pipe * net.msmq localhost msmq.formatname localhost When setting up a new application under the default site, the test function passes both connection/authorisation only if the 'connect as' user is local admin, otherwise the test errors with 'invalid application path'. At no point is the W3SVC service PID bound to port 80 (it is running and bound to 21 for ftp). There are no W3SVC log directory at c:\inetpub\logs\LogFiles\ (only FTPSVC2), and no HTTPERR directory at c:\windows\system32\ or c:\windows\system32\logfiles\. There do not appear to be any related errors in the event logs. I'd really appreciate any thoughts on be a good place dig into what's (not) going on here!

Read the article

Slow transfer speed between two servers

- by Linux Guy

I have two servers both network cards speed is 10Gbps The inbound bandwidth between two servers is 10Gbps , the outbound bandwidth internet bandwidth is 500Mpbs Both servers using public ip addresses in public and private network Both servers transfer and connection on nginx port , and the server B used for streaming media , like youtube stream videos I check the transfer speed using iperf utility From Server A to Server B # iperf -c 0.0.0.1 -p 8777 ------------------------------------------------------------ Client connecting to 0.0.0.1, TCP port 8777 TCP window size: 85.3 KByte (default) ------------------------------------------------------------ [ 3] local 0.0.0.0 port 38895 connected with 0.0.0.1 port 8777 [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.8 sec 528 KBytes 399 Kbits/sec My Current Connections in Server B # netstat -an|grep ":8777"|awk '/tcp/ {print $6}'|sort -nr| uniq -c 2072 TIME_WAIT 28 SYN_RECV 1 LISTEN 189 LAST_ACK 139 FIN_WAIT2 373 FIN_WAIT1 3381 ESTABLISHED 34 CLOSING Server A Network Card Information Settings for eth0: Supported ports: [ TP ] Supported link modes: 100baseT/Full 1000baseT/Full 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: Yes Speed: 10000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: external Auto-negotiation: on MDI-X: Unknown Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes Server B Network Card Information Settings for eth2: Supported ports: [ FIBRE ] Supported link modes: 10000baseT/Full Supported pause frame use: No Supports auto-negotiation: No Advertised link modes: 10000baseT/Full Advertised pause frame use: No Advertised auto-negotiation: No Speed: 10000Mb/s Duplex: Full Port: Direct Attach Copper PHYAD: 0 Transceiver: external Auto-negotiation: off Supports Wake-on: d Wake-on: d Current message level: 0x00000007 (7) drv probe link Link detected: yes The problem is : as you can see from iperf utility, the transfer speed from server A to server B slow when i restart network service the connection will be ok , after 2 minutes , it's getting slow How could i troubleshoot slow speed issue and fix it in server B ? Notice : if there any other commands i should execute in servers for more information, so it might help resolve the problem , let me know in comments

Read the article

Using two ports on my ZyXel USG gateway to patch two devices together?

- by Matthew Beza

I don't know if this is possible but it would save me many long drives! I have drawn, with my epic MS Paint skills, my current setup. I have a ZyXel USG300 Gateway with a built in 5 port switch. It supports bridging, tunnles, VLANs, etc.. I have a Cisco WLC2112 plugged into port 6 (P6). The cisco is set to 192.168.6.2 and P6 is set to 192.168.6.1. This works but I need to incorporate a Nomadix AG3000 to handle guests. (Router (A) in the picture). So I need the Cisco WLC2112 to use the Nomadix as if it where plugged into it's LAN port. Right now the Nomadix WAN Port is plugged into (P2) on the ZyXel, and the Nomadix LAN port is plugged into (P3). Is it possible to set something up where (P3) and (P6) are somehow "Patched" as if the Cisco was plugged directly into the Nomadix LAN port? Basically making the ZyXel a fancy Cat5e coupler?

Read the article

Configuring vlans on Cisco SG200 series switch with Ubuntu server

- by nixnotwin

I created a vlan on Ubuntu with vconfig tool with 21 as id and eth1 as the host port. I connected eth1 to one of the ports on the swtich (GE23) as all ports trunk by default. In the webgui I created a vlan named test with the id 21 and I made GE2 are port as an access port. In port to vlan mapping I selected vlan 21 and added it port GE2 by selecting untagged option. I have assigned 192.168.1.1/24 as the ip of eth1.21 on Ubuntu. If I connect another cleint pc to GE2 port with a ip of 192.168.1.2/24 I cannot ping the server ip (192.168.1.1/24). Ping from server to client also does not work. I inspected packets that are sent out eth1 on the server and I could see the vlan 21 tag. And I connect the other end of the cable to a different Linux pc and inspected the packets but no vlan tags can be seen. What could be preventing me from getting vlans working? Edit 1 screenshots:

Search Results

Search found 10810 results on 433 pages for 'port forwarding'.

Page 94/433 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101 | Next Page >

- by Blue Gene

- by user1663896

- by Fawkes5

- by AodhanOL

- by user1624552

- by yves Baumes

- by Ian

- by Kjir

- by ZelluX

- by daydreamer

- by The.Anti.9

- by Cthulhu

- by Ashwin

- by AustinM

- by user1670178

- by Ashwin

- by WarpKid

- by FAtBalloon

- by Moein7tl

- by reve_etrange

- by Kyle

- by Linux Guy

- by Matthew Beza

- by nixnotwin

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101 | Next Page >