Search Results

Search found 4808 results on 193 pages for 'reserved instances'.

Page 94/193 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• Restricting memory area for linux kernel

  - by user1066789

  I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ >> It should uncompress FDT here & continue ============== Any thoughts ?

  Read the article

• Recurring events repeatedly saves a draft every minute

  - by Henrik Rasmussen

  Using Outlook 2010, some of my recurring (planned, not drafts) events is saving a draft to my Drafts folder every single minute as long as it's active. An example taken from real life is that I have a calendar entry (Appointment) occuring every day from 24-09-2012 until 28-09-2012 from 08:00 to 16:00 (GMT+1) with a blue category, only one participant (me) with subject but without a place. So every minute from 24-09-2012 until 28-09-2012 from 08:00 to 16:00, but not from 16:00 to 08:00, a new draft is automatically saved in my Drafts folder. How do I get rid of that behaviour? Addition here: Removing the offending event just allows a new one to take its place. There doesn't seem to be much on the sites - Microsoft calls it a "personal" issue, but there are more and more instances.

  Read the article

• Restricting memory area for linux kernel

  - by user1066789

  I am running ltib linux on P1022RDK (P1022 Core) platform. I have 512 MB = 0x20000000 memory. I want my linux kernel to use second half of the board memory (i.e from 256 MB to 512 MB) and want first half of memory to be reserved for some other purpose. For this I am building linux kernel using ltib. For that purpose I am setting following kernel configuration. Please suggest if I am doing it the right way. CONFIG_LOWMEM_SIZE = 0x10000000 # 256 MB CONFIG_PHYSICAL_START = 0x10000000 # Starting from 256MB (second half of memory) On the Uboot I am loading the kernel as following way setenv loadaddr 0x11000000 # Kernel base = 0x10000000 + 0x01000000 (offset) setenv fdtaddr 0x10c00000 # Kernel base = 0x10000000 + 0x00c00000 (offset) bootm $loadaddr - $fdtaddr My kernel Load address is 0x10000000 & kernel entry point is 0x10000000 Doing above configuration / steps my kernel stuck at following on Uboot ## Booting kernel from Legacy Image at 11000000 ... Image Name: Linux-2.6.32.13 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 3352851 Bytes = 3.2 MB Load Address: 10000000 Entry Point: 10000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 10c00000 Booting using the fdt blob at 0x10c00000 Uncompressing Kernel Image ... OK ================ It should uncompress FDT here & continue ============== Any thoughts ?

  Read the article

• Does anybody wish to help a poor researcher publish a paper?

  - by Mihai Todor

  I don't know if this is a good place to beg for help, but here it goes: basically, I need to run a secure recommender system simulation (C++ console application) in order to meet tonight's deadline, and the faculty's server grid decided to go offline. I could really use something like 10+ (actually, about 16 would be required to meet the deadline) virtual instances of some Linux that has GMP installed... Ideally, they should all have the same specs, because a part of the simulation will represent performance benchmarks. If my question is inappropriate in any way, I kindly ask the administrators to remove it.

  Read the article

• EC2 persistence of machine

  - by Seagull

  I notice that EBS-backed AMIs are much like a VMWare instances -- I can stop them and also persist them to disk, and all this is done relatively quickly. However, I believe that S3 backed machines are different. They cannot be 'stopped', but rather can only be shut-down, written to S3 disk and started up again; with at least a 15 min delay in doing so. Why the difference? How do AMI providers decide whether to use EBS or S3? If I need to stop/persist/restart machines relatively frequently, then I am implicitly limited to just the EBS-backed machines?

  Read the article

• SQL Server tempdb question

  - by Abe Miessler

  From what I understand the system database is used to hold temporary tables, intermediate results and other temporary information. On one of my database instances I have a tempdb that is seems very large (30GB). This database has not been modified (as in "last modified date" on the mdf file) in over a week. Is it normal to have the temp db remain that large for that long of a period? It seems to me that it should be updating fairly often and returning space that it is using fairly quickly... Am I way off here or is SQL Server doing something weird? FYI: This is a SharePoint 2010 database, not sure if that makes a difference.

  Read the article

• Database modularity with EBS volumes

  - by Eclyps19

  I would like to add modularity to my websites on EC2 instances by encapsulating the site files and the mysql files in their own EBS volumes. The end result that I'm going for is the ability to quickly mount a volume or two to different servers running the same AMI (for testing/development/emergency maintenance, etc), as well as maintain separate snapshots of each. I'm able to do this fairly easily with a single database by symlinking my mounted database EBS to the appropriate places (/var/lib/mysql, /etc/my.cnf, /var/log/mysqld.log), but I'm not sure if it would even be possible be possible to have multiple databases on different EBS volumes running concurrently. Example: /website1/www.website.com /database1/ /website2/www.otherwebsite.com /database2/ Could anybody shed some light on this for me? Is it possible? Is it a bad idea? Thanks.

  Read the article

• Xen domU passwd file overwritten with console log output

  - by malfy

  I was setting up a Debian Xen domU and after booting it fine, I added basic configuration to /etc/network/interfaces and ran /etc/init.d/networking restart. This failed so I decided to reboot. After the reboot I also ran xm shutdown box. When dropped to a shell prompt it wouldn't let me login. Upon further inspection, I now have garbage in some critical files in /etc: root@box:/# tail +1 mnt/etc/{passwd-,shadow} tail: cannot open `+1' for reading: No such file or directory ==> mnt/etc/passwd- <== 0000000000100000 (reserved) Nov 23 02:02:39 box kernel: [ 0.000000] Xen: 0000000000100000 - 0000000004000000 (usable) Nov 23 02:02:39 box kernel: [ 0.000000] DMI not present or invalid. Nov 23 02:02:39 box kernel: [ 0.000000] last_pfn = 0x4000 max_arch_pfn = 0x1000000 Nov 23 02:02:39 box kernel: [ 0.000000] initial memory mapped : 0 - 033ff000 Nov 23 02:02:39 box kernel: [ 0.000000] init_memory_mapping: 0000000000000000-0000000004000000 Nov 23 02:02:39 box kernel: [ 0.000000] NX (Execute Disable) protection: active Nov 23 02:02:39 box kernel: [ 0.000000] 0000000000 - 0004000000 page 4k Nov 23 02:02:39 box kernel: [ 0.000000] kernel direct mapping tables up to 4000000 @ 7000-2c000 Nov 23 02:02:3 ==> mnt/etc/shadow <== 32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1 Nov 23 02:02:39 box kernel: [ 0.000000] PERCPU: Embedded 15 pages/cpu @c15b0000 s37688 r0 d23752 u65536 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: s37688 r0 d23752 u65536 alloc=16*4096 Nov 23 02:02:39 box kernel: [ 0.000000] pcpu-alloc: [0] 0 Nov 23 02:02:39 box kernel: [ 0.000000] Xen: using vcpu_info placement Nov 23 02:02:39 box kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16160 Nov 23 02:02:39 box kernel: [ 0.000000] Kernel command line: root=/dev/mapper/xen-guest_root ro quiet root=/dev/xvda1 ro Nov 23 02:02:39 box kernel: [ 0.000000] PID hash table entries: The garbage is also present in the passwd file and the group file (although I didn't paste that above since I have since ran debootstrap on the filesystem again). Does anyone have any insight into what happened and why?

  Read the article

• Replacing hyperlinks in Apache2 ProxyPass

  - by Jeroen

  I am using Apache2 with mod proxy on Ubuntu 12.04 as a reverse proxy to some back-end server: <VirtualHost *:80> ProxyPass / http://somewhere.com/mysite ProxyPassReverse / http://somewhere.com/mysite ServerName www.mysite.nl ServerAlias mysite.nl *.mysite.nl </VirtualHost> However, unfortunately the back-end server has some internal links hardcoded; e.g. a link to somewhere else in the site has <a href="http://somewhere.com/mysite/something"> instead of just <a href="something.png">. Is there a way I can use Apache to replace strings in the body as served by the backend before passing it back to the client? E.g replace all instances of "http://somewhere.com/site/" with "http://mysite.nl/" ? I know nginx or so is better as a reverse proxy, but the server is hosting other stuff so port 80 needs to be Apache2.

  Read the article

• SQL 2005 wont fully uninstall

  - by Cragly

  Hi all, I am trying to uninstall my default instance of SQL Server 2005 from my Windows 7 machine but having a few problems. Everything uninstalls as it should using Add/Remove programs but for some reason I am still left with the ‘SQL Server Reporting Services (MSSQLSERVER)’ service installed and have no way of getting rid of it. I have tried to reinstall SQL Server 2005 and uninstall, followed the following Microsoft kb article http://support.microsoft.com/kb/909967 which uses the ARPWrapper.exe /Remove switch, but still the service exists. I want to get rid of every service so I can start with a clean install of named instances of SQL2005 and SQL2008. Any help would be appreciated. Cragly

  Read the article

• What does this mean: "SATP VMW_SATP_LOCAL does not support device configuration"?

  - by Jason Tan

  Can anyone tell me what this means in ESXi 5.1?: SATP VMW_SATP_LOCAL does not support device configuration I've googled it and I get a lot of results, but as yet all the pages that contain the string are discussing other matters. The storage array is a HDS HUS-VM and the hosts are HP b460c G8 blades with flex fabric and flex fabric VCs which I am in the process of commissioning and would like to get it started on the right foot - i.e. error and warning free! naa.600508b1001c56ee3d70da65f071da23 Device Display Name: HP Serial Attached SCSI Disk (naa.600508b1001c56ee3d70da65f071da23) Storage Array Type: VMW_SATP_LOCAL Storage Array Type Device Config: SATP VMW_SATP_LOCAL does not support device configuration. Path Selection Policy: VMW_PSP_FIXED Path Selection Policy Device Config: {preferred=vmhba0:C0:T0:L1;current=vmhba0:C0:T0:L1} Path Selection Policy Device Custom Config: Working Paths: vmhba0:C0:T0:L1 Is Local SAS Device: true Is Boot USB Device: false This is the same LUN: ~ # esxcli storage core device list -d naa.60060e80132757005020275700000016 naa.60060e80132757005020275700000016 Display Name: HITACHI Fibre Channel Disk (naa.60060e80132757005020275700000016) Has Settable Display Name: true Size: 204800 Device Type: Direct-Access Multipath Plugin: NMP Devfs Path: /vmfs/devices/disks/naa.60060e80132757005020275700000016 Vendor: HITACHI Model: OPEN-V Revision: 5001 SCSI Level: 2 Is Pseudo: false Status: degraded Is RDM Capable: true Is Local: false Is Removable: false Is SSD: false Is Offline: false Is Perennially Reserved: false Queue Full Sample Size: 0 Queue Full Threshold: 0 Thin Provisioning Status: unknown Attached Filters: VAAI_FILTER VAAI Status: supported Other UIDs: vml.020001000060060e801327570050202757000000164f50454e2d56 Is Local SAS Device: false Is Boot USB Device: false ~ #

  Read the article

• How do hdparm's -S and -B options interact?

  - by user697683

  These two options seem confusing. For example: according to the man page -B 254 "does not permit spin-down". However, testing with -B 254 -S 1 the drive does spin down after 5 seconds. -B Query/set Advanced Power Management feature, if the drive supports it. A low value means aggressive power management and a high value means better performance. Possible settings range from values 1 through 127 (which permit spin-down), and values 128 through 254 (which do not permit spin-down). The highest degree of power management is attained with a setting of 1, and the highest I/O performance with a setting of 254. A value of 255 tells hdparm to disable Advanced Power Management altogether on the drive (not all drives support disabling it, but most do). -S Put the drive into idle (low-power) mode, and also set the standby (spindown) timeout for the drive. This timeout value is used by the drive to determine how long to wait (with no disk activity) before turning off the spindle motor to save power. Under such circumstances, the drive may take as long as 30 seconds to respond to a subsequent disk access, though most drives are much quicker. The encoding of the timeout value is somewhat peculiar. A value of zero means "timeouts are disabled": the device will not automatically enter standby mode. Values from 1 to 240 specify multiples of 5 seconds, yielding timeouts from 5 seconds to 20 minutes. Values from 241 to 251 specify from 1 to 11 units of 30 minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 signifies a timeout of 21 minutes. A value of 253 sets a vendor-defined timeout period between 8 and 12 hours, and the value 254 is reserved. 255 is interpreted as 21 minutes plus 15 seconds. Note that some older drives may have very different interpretations of these values.

  Read the article

• Another installation is in progress

  - by Steven

  Why I try to install any program I see "Another installation is in progress. You must complete that installation before continuing this one." error. Googled the web and found that solution would be to delete HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\InProgress registry key and reboot. That didn't help me unfortunately. When I open "Services" mmc snapin it shows that "Windows Installer" service is "Started", but "Start/Stop/Pause/Restart" buttons are grayed (the interesting thing is that startup type = "Manual", so I don't really know how to explain that I already have 2 instances of msiexec.exe in memory and one instance is consuming 50Mb of memory. Looks like there's a serious issue with my installer service - is there any way to fix it (please do mind - I can't install anything!) Any help would be greatly appreciated.

  Read the article

• Redirect 'host-based' requests to a port (inside a docker container)

  - by Disco

  I'm trying to achieve this fun project of having multiple 'postfix/dovecot' instances inside a docker container. I'm searching for 'something' that would redirect any incoming request on port 25 (any maybe later 143, 993) to the right container on a different port. Here's the idea : +-------+ +----------+ (internet)----(port 25) |mainbox| ---- (port 52032) |container1| (postfix) +-------+ | +----------+ \ (port 52033) +----------+ |container2| (postfix) +----------+ So the idea is to 'redirect' requests coming to port 25 and based on 'hostname' to forward to the right port (internally); ideally, it would be great to manage this 'mapping' with a database/textfile Any ideas ? Directions ?

  Read the article

• How do I setup a systemd service to be started by a non root user as a user daemon?

  - by Hans

  I just finished the install and setup process of systemd on my arch-linux system (2012.09.07). I uninstalled initscripts (and removed the configuration files). What I want to do is create a service that can be started and stopped by a non-root user. The service is to start a detached screen session running rtorrent. However I want every user on the system who has set this service to start (enabled) to have a particular instance started for them specifically. How would one go about doing this? I remember reading that systemd supports user instances of services, however I have been unable to find any information on how to set this up, or whether it relates to what I am looking for. Service file that I have used for system: [Unit] Description=rTorrent [Service] Type=forking ExecStart=/usr/bin/screen -d -m -S rtorrent /usr/bin/rtorrent ExecStop=/usr/bin/killall -w -s 2 /usr/bin/rtorrent

  Read the article

• Monitoring multiple sites on a single server using OpsView

  - by Kev

  We have several web servers. On each of these servers there can be ~250 web sites. I need to add a HTTP check for each site on each server. Each site has a reserved host header that we know can always be resolved in the format of: w10000.hostchecks.mycompany.com w10020.hostchecks.mycompany.com w11992.hostchecks.mycompany.com ..and so on.. What I want is for there to be a master ping check on the web server's main IP address and then separate HTTP checks for each of the sites on the server. If the master ping test fails then I want the HTTP tests to cease until the master ping check goes OK. I had a stab at this and tried do the following: Create a parent host that does a ping check on the server's main ip address (e.g. server is named WEB0001). For each of the sites that reside on WEB0001: Create a separate Host with a Primary Hostname of wXXXXX.hostchecks.mycompany.com Make WEB0001 the parent host Add a monitor (HTTP check to a special url that is mapped into each site using a virtual directory: H- $HOSTADDRESS$ -u /__hostcheck/IsAlive.aspx -w 5 -c 10 -p 80 However I find that if I down the parent server (WEB0001) the http checks seem to continue. Am I going about this completely the wrong way?

  Read the article

• Find files containing a string on the whole filesystem

  - by Fabio

  I need to find all the instances of a given string in the whole filesystem, because I don't remember in which configuration files, script or any other programs I put it and I need to update that string with a new one. I tried with the following command `grep -nr 'needle' / --exclude-dir=.svn | mail [email protected] -s 'References on xxx' If I run this command on a small directory it gives me the output I need in the form /path1/:nn:line containing needle /path2/:nn:line containing needle where /path1 is the full path of the file, nn is the row containing the needle and last field is the content of the line. However when I run the command on the root directory the grep process hang after a while. I run this script about 8 hours ago and even on a small filesystem (less than 5GB) it doesn't end and if I run top or ps the process seems sleeping root 24909 0.0 0.1 3772 1520 pts/1 S+ Feb10 0:15 grep -nr needle / --exclude-dir=.svn Why it doesn't end? Is there any better way to do this (it's a one time job, I don't need to execute this more than once) Thanks.

  Read the article

• How do I hook into Tar with BASH?

  - by orb

  Long Story Short I am working with Tar archives that contain PNG images in base64 encoding. I would like to use BASH (or whatever else works) to hook into the extraction function of Tar to decode PNG images from base64 encoding to standard PNG encoding after the files are unpacked. A simple cat $input-file | base64 -d >$output-file will successfully decode the images. Is there a way I can hook into tar -xf so that users do not have to do any (or minimal) extra work to decode the images? In the GNU Tar documentation (http://www.gnu.org/software/tar/manual/html_chapter/Backups.html#SEC97) I found that there are in fact variables reserved to hold the names of functions I desire to be hooked into various moments in Tar program execution. However, the documentation explains that these variables, along with other variables that can be set to configure Tar, are located in a file named backup-specs. Unfortunately, the path to this file is not given. Further, running sudo find / -name backup-specs tells me that this file is not present on my Ubuntu version 13.04 system. Background Information not included in the Long Story Short I have been working on a browser-based (WebGL) particle effect creation application (http://www.particleeffect.org), (https://github.com/cgrabowski/webgl-particle-effect-editor), (https://github.com/cgrabowski/webgl-particle-effect). I have began to write a client-side-only solution for saving and loading effect data as a tar archive. However, since client-side JavaScript has limited capability to process binary data, the images used as textures in the effect are saved with base64 encoding. I have been able to implement saving effect data as a Tar archive (haven't pushed that to Github yet). However, the images present in said Tar archive cannot be manipulated unless they are decoded from base64 encoding.

  Read the article

• Is wiper.sh working?

  - by Aleksander Blomskøld

  I'm setting up a server running Ubuntu Precise, and I'm trying to verify if SSD TRIM is working. fstrim is failing: ~ sudo fstrim -v / fstrim: /: FITRIM ioctl failed: Operation not supported So I tried wiper.sh in hdparm: wiper-3.5 sudo ./wiper.sh --verbose --commit /dev/sda1 wiper.sh: Linux SATA SSD TRIM utility, version 3.5, by Mark Lord. rootdev=/dev/sda1 fsmode2: fsmode=read-write /: fstype=ext4 freesize = 169502088 KB, reserved = 1695020 KB Preparing for online TRIM of free space on /dev/sda1 (ext4 mounted read-write at /). This operation could silently destroy your data. Are you sure (y/N)? y Creating temporary file (167807068 KB).. Syncing disks.. Beginning TRIM operations.. get_trimlist=/sbin/hdparm --fibmap WIPER_TMPFILE.11503 /dev/sda: trimming 3211263 sectors from 64 ranges succeeded trimming 3571713 sectors from 64 ranges succeeded trimming 3915776 sectors from 64 ranges succeeded (...) trimming 3657913 sectors from 60 ranges succeeded Removing temporary file.. Syncing disks.. Done. It seems to be working, but I'm wondering if it really is. Are there any cases where wiper.sh should work when fstrim isn't? Is there any way I can check if the TRIMing actually has succeeded (other than trusting the wiper.sh-log)?

  Read the article

• Unable to connect to a remote SQL Server Instance over a VPN

  - by Jack Njiri

  I'm running SQL Server 2005 on two different servers running Win XP. The two servers are in different physical locations and are connected via a dedecated point to point data link in a virtual private network(VPN). Im only able to connect to the remote instance of SQL Server by specifying the IP address on the server name property. If I provide the actual server name say 'ServerA', then I get an error message. Everything works fine except configuring replication at the subscriber level, which requires the actual name of the instance, not an IP address or alias. I have already configured both instances on allow remote connections and im running the SQL Server Browser. How do I connect to the remote instance by providing the instance name? Alternatively how I configure subscription to a remote publisher without supplying the remote instance name?

  Read the article

• How do I point one virtual host to another instance of apache running at another port on the same bo

  - by sacamano

  Hi there. I've got two apache2 instances running on my box. One came with a bitnami redmine stack which sole purpose is to host Redmine at host:8080/redmine. The other apache instance is running with php and such and is where I specify all the VHosts for my domains. Now I'd like to point redmine.somedomain.com at www.somedomain.com:8080/redmine so that redmine is accessible through a subdomain and on port 80. Redmine is a Ruby on Rails app and runs with Phusion Passenger so I can't just point the vhost to the htdocs directory of the redmine install. How is this done? I've tinkered with ProxyPass and ProxyPassReverse but I just can't get it working. All help is greatly appreciated.

  Read the article

• knife server create- finding lists of flavors

  - by JohnMetta

  I'm new to Chef and I think I'm missing something in reading the docs. I want to create servers using knife server create (options) but can't seem to find fully complete documentation on the options. Specifically, how do I find a mapping of server flavors to whatever knife is looking for? Given the official wiki entry for "Launch Cloud Instances with Knife," the following is an example server creation on Rackspace: knife rackspace server create 'role[webserver]' --server-name server01 --image 49 --flavor 2 Likewise, on the Knife Man Page, there are commands for EC2 server images (using --d --distro DISTRO) and for Slicehost servers (using -f --flavor FLAVOR) However, what none of the documentation I've found describes is how to translate what I want to build on Rackspace ("I want Ubuntu 10.04 LTS") to what the integer entry that knife is seeking. It strikes me that, given the lack of a description in the documentation for how to find the flavor, this should be obvious. Thus, I think I'm missing something.

  Read the article

• catch-22 with apt-get

  - by Mark J Seger

  I'd recently installed a package and discovered my scp stopped working. After removing and installing some things I got it fixed but then I stated getting errors in apt-get about dpkg: error: configuration error: /etc/dpkg/dpkg.cfg.d/multiarch:1: unknown option 'foreign-architecture' so I commented it out and thought that fixed the problem until I discovered the chrome icon in my launcher turned into a ? and chrome no longer worked. I tried to reinstall it and got the apt-get error: "ambiguous package name 'libglib2.0-0' with more than one installed instance" if I try to remove libglib2 I get the error The following packages have unmet dependencies: iceape-browser : Depends: iceape but it is not going to be installed iceape-chatzilla : Depends: iceape (>= 2.7.11) but it is not going to be installed Depends: iceape (<= 2.7.11-1.1~) but it is not going to be installed E: Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. so then I tried to remove icape-browser and it complained about the 2 instances of libglinb2. in fact virtually any command I issue does the same thing so I don't know what I can do to untangle things.

  Read the article

• Better performance with memcached cluster or local memcaches?

  - by Nicholas Tolley Cottrell

  I have a small cluster of servers balancing a Java web app. Currently I have 3 memcached servers caching data and all web apps shares all 3 memcached instances. I often get strange slowdowns and timeouts to some of the memcacheds and I wondering if there is a good way of analyzing the performance. I am wondering whether my iptables rules (or some other system limitation) are blocking/slowing connections. I am considering reconfiguring the web apps so that they only query the memcached process on their own localhost.

  Read the article

• zabbix monitoring mysql database

  - by krisdigitx

  I have a server running multiple instances of mysql and also has the zabbix-agent running. In zabbix_agentd.conf i have specified: UserParameter=multi.mysql[*],mysqladmin --socket=$1 -uzabbixagent extended-status 2>/dev/null | awk '/ $3 /{print $$4}' where $1 is the socket instance. From the zabbix server i can run the test successfully. zabbix_get -s ip_of_server -k multi.mysql[/var/lib/mysql/mysql2.sock] and it returns all the values However the zabbix item/trigger does not generate the graphs, I have created a MACRO for $1 which is the socket location {$MYSQL_SOCKET1} = '/var/lib/mysql/mysql2.sock' and i use this key in items to poll the value multi.mysql[{$MYSQL_SOCKET1},Bytes_sent] LOGS: this is what i get on the logs: 3360:20120214:144716.278 item [multi.mysql['/var/lib/mysql/mysql2.sock',Bytes_received]] error: Special characters '\'"`*?[]{}~$!&;()<>|#@' are not allowed in the parameters 3360:20120214:144716.372 item [multi.mysql['/var/lib/mysql/mysql2.sock',Bytes_sent]] error: Special characters '\'"`*?[]{}~$!&;()<>|#@' are not allowed in the parameters Any ideas where the problem could be? FIXED {$MYSQL_SOCKET1} = /var/lib/mysql/mysql2.sock i removed the single quotes from the line and it worked...

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >