Search Results

Search found 9286 results on 372 pages for 'transfer speed'.

Page 94/372 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

• How to simulate different CPU frequency and limit RAM

  - by user351103

  Hi I have to build a simulator with C#. This simulator should be able to run a second thread with configureable CPU speed and limited RAM size, e.g. 144MHz and 50 MB. Of course I know that a simulator can never be as accurate as the real hardware. But I try to get almost similar performance. At the moment I'm thinking about creating a thread which I will stop/sleep from time to time. Depending on the desired CPU speed the simulator should adjust the sleep time of this thread and therefore simulate different cpu frequency. To measure the achieved speed I though about using PerformanceCounters. But with this approach I have the problem that I don't know how to limit the RAM size the thread could use. Do you have any ideas how to realize such a simulator? Thanks in advance!!

  Read the article

• Windows Azure: need to know the data processing time

  - by veda

  I have stored some files in the form of blobs on azure and I have written an application that would access these blobs. When I host this application as a web role on azure, it works perfectly and I am happy with that. But now, I wanted to know “what is the query time taken to access each blob file?” I was searching for this through the Microsoft Azure Storage SLA and I found that for GetBlob request type, the maximum processing time should be within the product of 2 seconds multiplied by the number of MBs transferred in processing the request. I am still unclear. What is the actual processing time of my data query? How can I measure it? Can I be able to speed up the processing time? I can understand that the processing time depends on internet speed, location of the data center where my data is being stored, and location of data center where my application is being hosted. But still, will I be able to speed up my query?

  Read the article

• Passing parameters to web service method in c#

  - by wafa.cs1

  Hello I'm developing an android application .. which will send location data to a web service to store in the server database. In Java: I've used REST protocol so the URI is: HttpPost request = new HttpPost("http://trafficmapsa.com/GService.asmx/GPSdata? lon="+Lon+"&Lat="+Lat+"&speed="+speed); In Asp.net (c#) web service will be: [WebMethod] public CountryName GPSdata(Double Lon, Double Lat, Double speed) { after passing the data from android ..nothing return in back .. and there is no data in the database!! Is there any library missing in the CS file!! I cannot figure out what is the problem.

  Read the article

• C# animation - move object from A to B or by angle

  - by Nullstr1ng

  Hi am just doing a little animation which moves an object from point a to point b or by angle/radians. what I currently have is this Point CalcMove(Point pt, double angle, int speed) { Point ret = pt; ret.X = (int)(ret.X + speed * Math.Sin(DegToRad(angle))); ret.Y = (int)(ret.Y + speed * Math.Cos(DegToRad(angle))); return ret; } but it doesn't look what i expected. please help? update: oh and am using NETCF

  Read the article

• How to prevent duplicates, macro or something?

  - by blez

  Well, the problem is that I've got a lot of code like this for each event passed to the GUI, how can I shortify this? Macros wont do the work I guess. Is there a more generic way to do something like a 'template' ? private delegate void DownloadProgressDelegate(object sender, DownloaderProgressArgs e); void DownloadProgress(object sender, DownloaderProgressArgs e) { if (this.InvokeRequired) { this.BeginInvoke(new DownloadProgressDelegate(DownloadProgress), new object[] { sender, e }); return; } label2.Text = d.speedOutput.ToString(); } private delegate void DownloadSpeedDelegate(object sender, DownloaderProgressArgs e); void DownloadSpeed(object sender, DownloaderProgressArgs e) { if (this.InvokeRequired) { this.BeginInvoke(new DownloadSpeedDelegate(DownloadSpeed), new object[] { sender, e }); return; } string speed = ""; speed = (e.DownloadSpeed / 1024).ToString() + "kb/s"; label3.Text = speed; }

  Read the article

• my javascript code is working in internet explorer but not working in mozilla

  - by goutham

  function buildMenu() { speed=35; topdistance=100; items=6; y=-50; ob=1; if (navigator.appName == "Netscape") { v=".top=",dS="document.",sD=""; } else { v=".pixelTop=",dS="",sD=".style"; } } function scrollItems() { if (ob<items+1) { objectX="object"+ob; y+=10; eval(dS + objectX + sD + v + y); if (y<topdistance) setTimeout("scrollItems()",speed); else y=-50, topdistance+=40, ob+=1, setTimeout("scrollItems()",speed); } }

  Read the article

• Definition of variables/fields type within a constructor, how is it done?

  - by elementz

  I just had a look at Suns Java tutorial, and found something that totally confused me: Given the following example: public Bicycle(int startCadence, int startSpeed, int startGear) { gear = startGear; cadence = startCadence; speed = startSpeed; } Why is it, that the types of the variables (fields?) gear, cadence and speed do not need to be defined? I would have written it as follows: public Bicycle(int startCadence, int startSpeed, int startGear) { int gear = startGear; int cadence = startCadence; int speed = startSpeed; } What would be the actual differnce?

  Read the article

• Using Python read specific (column, row) values from a txt file

  - by user2955708

  I would like to read values from a text file until that is a float value. Lets say I have the following file: 14:53:55 Load 300 Speed 200 Distance,m Fz Fx Speed 0.0000 249 4 6.22 0.0002 247 33 16.29 0.0004 246 49 21.02 0.2492 240 115 26.97 0.2494 241 112 21.78 0.2496 240 109 13.09 0.2498 169 79 0.27 Distance,m Fz Fx Speed 0.0000 249 4 7.22 0.0002 247 33 1.29 0.0004 246 49 271.02 0.2492 240 115 26.97 0.2494 241 112 215.78 0.2496 240 109 13.09 0.2498 169 79 0.27 And I need only the values under the first Distance column. So something like skip the first few rows, then read values from the first column while it is float. Thanks your help in advance

  Read the article

• Pushing DNSSEC updates with offline keys

  - by eggyal

  In a non-professional capacity, I look after the DNS of some 18 domains: mostly personal/vanity domains for immediate family. I outsource the whole shebang to an inexpensive managed hosting provider with a web interface through which I manage the zones; since the provider also offers DNSSEC, I have successfully deployed that too. These domains are so unimportant that an attack targetted against them seems much less likely than a general compromise of my provider's systems, at which point the records of all their customers might be changed to misdirect traffic (perhaps with extremely long TTLs). DNSSEC could protect against such an attack, but only if the zone's private keys are not held by the hosting provider. So, I wonder: how can one keep DNSSEC private keys offline yet still transfer signed zones to an outsourced DNS host? The most obvious answer (to me, at least) is to run one's own shadow/hidden master (from which the provider can slave) and then copy offline-signed zonefiles to the master as required. The problem is that the only machine I (want to*) control is my personal laptop, which usually connects from a typical home ADSL (behind NAT over a dynamically-assigned IP address). Having them slave from that (e.g. with a very long Expiry time on the zone for periods when my laptop is offline/unavailable) would not only require a Dynamic DNS record from which they can slave (if indeed they can slave from a named host rather than a static IP address), but would also involve me running a DNS server on my laptop and opening both it and my home network up to the incoming zone transfer requests: not ideal. I would prefer a much more push-oriented design, whereby my laptop initiates transfer of offline-signed zonefiles/updates to the provider's servers. I looked into whether nsupdate could fit the bill: documentation is a little sketchy, but my testing (with BIND 9.7) suggests it can indeed update DNSSEC zones, but only where the server holds the keys to perform the zone signing; I have not found a way to have it take an update including the relevant RRSIG/NSEC/etc. records and have the server accept them. Is this a supported use-case? If not, I suspect the only solutions which could fit the bill will involve non-DNS-based transfer of the zone updates and would welcome recommendations that are supported by (hopefully inexpensive) hosting providers: SFTP/SCP? rsync? RDBMS replication? Proprietary API? Finally, what would be the practical implications of such a setup? Key rotation is jumping out at me as being an obvious difficulty, especially if my laptop is offline for extended periods. But the zones are extremely stable, so perhaps I could get away with long-lived ZSKs**...? * Whilst I could run a shadow/hidden master on e.g. an outsourced VPS, I dislike the overhead of having to secure / manage / monitor / maintain yet another system; not to mention the additional financial costs of so doing. ** Okay, this would enable a concerted attacker to replay outdated records—but the risk and impact of such are both tolerable in the case of these domains.

  Read the article

• Problems configuring nameserver in plesk

  - by Saif Bechan

  Hello, i have some troubles with setting up a nameserver in PLESK for months now. I have tried all possible scenario's but i can not get this to work. I am really in need for some help, and if you can i will really appreciate it. Basically what i want is to just set up a nameserver in PLESK. I have a primary IP, and my host gave me a secondary nameserver i can use. My host is leaseweb in the netherlands. I have made some screenshots of the important parts in my opinion, maybe you guys can see some errors in them. To use the secondary nameserver provided by leaseweb i had to enable ACL on that account, i did so and made a screenshot of that too. The DNS recursion is set to localnets. These settings have not changed for months, so the dns should be fully updated everywhere. The check i run is the following: https://www.sidn.nl/over-nl/aanvraag...-server-check/ Domeinnaam (inclusief .nl): rdshosting.nl Eerste Nameserver: ns1.rdshosting.nl Eerste IP: 62.212.66.33 Tweede Nameserver: ns7.leaseweb.net Tweede ip: 62.212.76.50 If i run the dns check of the netherlands it gives me the following errors: primary name server "ns1.rdshosting.nl." Error: specified name server is not listed as NS record. All public name servers for a domain must also be listed as NS records in the zone of the domain. This domain was specified explicitly as a name server, but not found in the zone description of the primary name server. TE.6a rdshosting.nl. 86400 IN SOA ns1.rdspartners.nl. saif2k.hotmail.com. (2010031102 12H 1H 7D 3H) Error: the MNAME in SOA says "ns1.rdspartners.nl." is the primary name server. The MNAME field in the SOA record (first parameter) lists a different primary name server from the one specified for this check. RFC1035 section 3.3.13 rdshosting.nl. 86400 IN NS ns1.rdspartners.nl. Warning: hidden name server "ns1.rdspartners.nl." never used for first contact. The zone contains an NS record for a host which is not in the list of specified name servers. Hence, this name server will not be used to initiate contact to the domain. It may be used in sequential lookups, so it may still be useful. secondary name server "ns1.rdspartners.nl." [BROKEN] [HIDDEN] Failure: name server at 77.232.85.129 cannot be reached: (unknown error) The name server could not be contacted, which may be due to temporary technical problems or global DNS configuration mistakes. The internal error is shown, but not always clear about the cause. secondary name server "ns7.leaseweb.net." Info: name server looks correctly configured. I have the content of the file etc/named.conf also: // $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $ // // Refer to the named(8) man page for details. If you are ever going // to setup a primary server, make sure you've understood the hairy // details of how DNS is working. Even with simple mistakes, you can // break connectivity for affected parties, or cause huge amount of // useless Internet traffic. options { allow-recursion { localnets; }; directory "/var"; auth-nxdomain no; pid-file "/var/run/named/named.pid"; // In addition to the "forwarders" clause, you can force your name // server to never initiate queries of its own, but always ask its // forwarders only, by enabling the following line: // // forward only; // If you've got a DNS server around at your upstream provider, enter // its IP address here, and enable the line below. This will make you // benefit from its cache, thus reduce overall DNS traffic in the Internet. /* forwarders { 127.0.0.1; }; */ /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; /* * If running in a sandbox, you may have to specify a different * location for the dumpfile. */ // dump-file "s/named_dump.db"; }; //Use with the following in named.conf, adjusting the allow list as needed: key "rndc-key" { algorithm hmac-md5; secret "CeMgS23y0oWE20nyv0x40Q=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; // Note: the following will be supported in a future release. /* host { any; } { topology { 127.0.0.0/8; }; }; */ // Setting up secondaries is way easier and the rough picture for this // is explained below. // // If you enable a local name server, don't forget to enter 127.0.0.1 // into your /etc/resolv.conf so this server will be queried first. // Also, make sure to enable it in /etc/rc.conf. zone "." { type hint; file "named.root"; }; zone "0.0.127.IN-ADDR.ARPA" { type master; file "localhost.rev"; }; // NB: Do not use the IP addresses below, they are faked, and only // serve demonstration/documentation purposes! // // Example secondary config entries. It can be convenient to become // a secondary at least for the zone where your own domain is in. Ask // your network administrator for the IP address of the responsible // primary. // // Never forget to include the reverse lookup (IN-ADDR.ARPA) zone! // (This is the first bytes of the respective IP address, in reverse // order, with ".IN-ADDR.ARPA" appended.) // // Before starting to setup a primary zone, better make sure you fully // understand how DNS and BIND works, however. There are sometimes // unobvious pitfalls. Setting up a secondary is comparably simpler. // // NB: Don't blindly enable the examples below. :-) Use actual names // and addresses instead. // // NOTE!!! FreeBSD runs bind in a sandbox (see named_flags in rc.conf). // The directory containing the secondary zones must be write accessible // to bind. The following sequence is suggested: // // mkdir /etc/namedb/s // chown bind.bind /etc/namedb/s // chmod 750 /etc/namedb/s zone "rdshosting.nl" { type master; file "rdshosting.nl"; allow-transfer { 77.232.85.129; 62.212.76.50; common-allow-transfer; }; }; zone "66.212.62.in-addr.arpa" { type master; file "66.212.62.in-addr.arpa"; allow-transfer { common-allow-transfer; }; }; acl common-allow-transfer { 62.212.76.50; }; As i mentioned i made some screenshots of some parts: First the dns settings in plesk: http://www.freeimagehosting.net/uploads/2480faed5e.jpg Second the acl settings in plesk: http://www.freeimagehosting.net/uploads/777f5e69b0.jpg Third my settings at leaseweb: http://www.freeimagehosting.net/uploads/de7122b19c.jpg And last the secondary nameserver settings from leaseweb: http://www.freeimagehosting.net/uploads/fd1da38a8f.jpg If someone has anysuggestion at all on this this will be highly appriciated. Thank you for your time! PS. I am dutch so dutch answers are welcome aswell

  Read the article

• Failing Sata HDD

  - by DaveCol

  I think my HDD is fried... Could someone confirm or help me restore it? I was using Hardware RAID 1 Configuration [2 x 160GB SATA HDD] on a CentOS 4 Installation. All of a sudden I started seeing bad sectors on the second HDD which stopped being mirrored. I have removed the RAID array and have tested with SMART which showed the following error: 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 I have no clue what this means, or if I can recover from it. Could someone give me some ideas on how to fix this, or what HDD to get to replace this? Complete SMART report: Smartctl version 5.33 [i686-redhat-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: GB0160CAABV Serial Number: 6RX58NAA Firmware Version: HPG1 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 T13 1532D revision 4a Local Time is: Tue Oct 19 13:42:42 2010 COT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED See vendor-specific Attribute list for marginal Attributes. General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 433) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 54) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 0 3 Spin_Up_Time 0x0002 097 097 000 Old_age Always - 0 4 Start_Stop_Count 0x0033 100 100 020 Pre-fail Always - 152 5 Reallocated_Sector_Ct 0x0033 095 095 036 Pre-fail Always - 214 7 Seek_Error_Rate 0x000f 078 060 030 Pre-fail Always - 73109713 9 Power_On_Hours 0x0032 083 083 000 Old_age Always - 15133 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0033 100 100 020 Pre-fail Always - 154 184 Unknown_Attribute 0x0032 038 038 000 Old_age Always - 62 187 Unknown_Attribute 0x003a 001 001 051 Old_age Always FAILING_NOW 4645 189 Unknown_Attribute 0x0022 100 100 000 Old_age Always - 0 190 Unknown_Attribute 0x001a 061 055 000 Old_age Always - 656408615 194 Temperature_Celsius 0x0000 039 045 000 Old_age Offline - 39 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x0032 070 059 000 Old_age Always - 12605265 197 Current_Pending_Sector 0x0000 100 100 000 Old_age Offline - 1 198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0000 200 200 000 Old_age Offline - 62 SMART Error Log Version: 1 ATA Error Count: 4645 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 4645 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 02 7b 86 b1 ea 00 00:38:52.796 READ DMA ec 03 45 00 00 00 a0 00 00:38:52.796 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:52.794 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 04 79 86 b1 ea 00 00:38:49.935 READ DMA Error 4644 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 04 79 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:49.991 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:49.935 READ DMA Error 4643 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4642 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA Error 4641 occurred at disk power-on lifetime: 15132 hours (630 days + 12 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 7b 86 b1 ea Error: UNC at LBA = 0x0ab1867b = 179406459 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 06 77 86 b1 ea 00 00:38:41.517 READ DMA ec 03 45 00 00 00 a0 00 00:38:41.515 IDENTIFY DEVICE ef 03 45 00 00 00 a0 00 00:38:41.515 SET FEATURES [Set transfer mode] ec 00 00 7b 86 b1 a0 00 00:38:41.513 IDENTIFY DEVICE c8 00 06 77 86 b1 ea 00 00:38:38.706 READ DMA SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15131 - # 2 Short offline Completed without error 00% 15131 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• Sphere entering in to the cube.unity

  - by Parthi

  I am trying Roll a Ball unity tutorial.Everything is fine,but when I roll the ball it is moving through the cube instead of picking it. my player class is using UnityEngine; using System.Collections; public class player : MonoBehaviour { public float speed; // Use this for initialization // Update is called once per frame void Update () { float h = Input.GetAxis("Horizontal"); float v = Input.GetAxis("Vertical"); Vector3 move = new Vector3(h,0,v); rigidbody.AddForce(move * speed * Time.deltaTime); } void OnTriggerEnter(Collider other) { if(other.gameObject.tag == "Pick up") { other.gameObject.SetActive(false); } } }

  Read the article

• Approximating walking physics via simpler sliding physics

  - by Dave

  I am modeling walking insects. I implement them as cuboids and use forces (including friction and drag), to control motion. However, the movement characteristics of this 'sliding box' physics don't match those due to a legged creature. For example, legged creatures near-instantly accelerate to their top speed; whereas applying a force to a box takes time to accelerate it. The applied force can be increased along with the counteracting drag, giving much quicker acceleration (via force) to a max speed (via drag). However, this also means the force that creatures can exert when pushing on other objects is increased. Does anyone know of any techniques using a physics engine to cheaply model walking creatures?

  Read the article

• Internet Protocol Suite: Transition Control Protocol (TCP) vs. User Datagram Protocol (UDP)

  How do we communicate over the Internet?  How is data transferred from one machine to another? These types of act ivies can only be done by using one of two Internet protocols currently. The collection of Internet Protocol consists of the Transition Control Protocol (TCP) and the User Datagram Protocol (UDP).  Both protocols are used to send data between two network end points, however they both have very distinct ways of transporting data from one endpoint to another. If transmission speed and reliability is the primary concern when trying to transfer data between two network endpoints then TCP is the proper choice. When a device attempts to send data to another endpoint using TCP it creates a direct connection between both devices until the transmission has completed. The direct connection between both devices ensures the reliability of the transmission due to the fact that no intermediate devices are needed to transfer the data. Due to the fact that both devices have to continuously poll the connection until transmission has completed increases the resources needed to perform the transmission. An example of this type of direct communication can be seen when a teacher tells a students to do their homework. The teacher is talking directly to the students in order to communicate that the homework needs to be done.  Students can then ask questions about the assignment to ensure that they have received the proper instructions for the assignment. UDP is a less resource intensive approach to sending data between to network endpoints. When a device uses UDP to send data across a network, the data is broken up and repackaged with the destination address. The sending device then releases the data packages to the network, but cannot ensure when or if the receiving device will actually get the data.  The sending device depends on other devices on the network to forward the data packages to the destination devices in order to complete the transmission. As you can tell this type of transmission is less resource intensive because not connection polling is needed,  but should not be used for transmitting data with speed or reliability requirements. This is due to the fact that the sending device can not ensure that the transmission is received.  An example of this type of communication can be seen when a teacher tells a student that they would like to speak with their parents. The teacher is relying on the student to complete the transmission to the parents, and the teacher has no guarantee that the student will actually inform the parents about the request. Both TCP and UPD are invaluable when attempting to send data across a network, but depending on the situation one protocol may be better than the other. Before deciding on which protocol to use an evaluation for transmission speed, reliability, latency, and overhead must be completed in order to define the best protocol for the situation.  

  Read the article

• ISO Files to USB &ndash; The Cheap and Easy Way

  - by RonGarlit

  (DISCLAIMER: Yes there are lots of more elegant ISO software beside the free Microsoft one I’m about to show. But free is free and it has been tested and works for me for making advance bootable USB drives. That is another story. Look up Windows 8 Developer Preview for that one on BING.) For those of use that work with new technology all the time we accumulate a lot of ISO files and have to burn them to CD/DVD’s quite often. But we now have machines without burner in the corporate environment. We have personally Netbooks and light wait highly mobile laptops that do not have DVD burner. USB ports are all the rage and now we have USB 3.0 which is way faster than the 2.0 we are used to. Just looking at the technology, space saving and the cost issues alone is a reason to buy these answer to the DVD’s. So what is special about USB 2.0 and USB 3.0? USB 2 has a maximum speed of 480 Mbps... (That is Megabits per SECOND!!) Now look at the storage that we have with USB thumb drives that are now up to 64 GB in size, cell phone and PDAs that have a lots of internal storage built in well above the 16 Gig range. At the MAX USB 2.0 speed of 480 Mbps a full transfer of data in between devices can take a long time. Time is money right. Every back up a iPhone? Don’t get me started. So at least the engineers have been planning ahead with USB 3.0 which offers a maximum transfer speed of 4.8 Gbps... (That is Giga bits per SECOND!!) That speed is almost 10 times faster than USB 2.0 …. We don’t need to do the math on that one do we? But for now I'm thrilled with USB 2.0 and the fact I can get these little 4 Gig USB drives for $4.00 each at Staples on sale. Well that is a no brainer don’t you think. But what can you do with them to replace that DVD. Simply and cheaply put………. THIS! First let’s get an ISO file like the Visual Studio 2010 Ultimate DVD ISO from MSDN to demonstrate with. I develop on several computers so this is a good choice for me. So we downloaded the ISO file and put it in a folder somewhere like this. Next we go download to the Windows 7 USB/DVD Download Tool site and read about the tool. http://www.microsoftstore.com/store/msstore/html/pbPage.Help_Win7_usbdvd_dwnTool And click this like to get the tool and install it. Once it is installed you go to the Start, Programs menu, Windows 7 USB DVD Download Tool folder. And then click the tool to open it up. As you will see it is a sweet, simple tool that was originally designed to put the ISO for Windows 7 which is designed to be bootable on a USB or DVD for us geeks to play with. It is now being used for the Windows 8 Developer Preview by many developers for that for the same purpose it was built for in the past. But for now we will use it to put a NON Bootable ISO on a USB. Hey it does the job and I’m reusing a left over program. Why buy the fancy one or a free trial and clutter up my machine. We will click the BROWSE button and navigate to where we put our ISO file we want to put on the USB drive. Obviously we are going to click NEXT and continue to select a USB Device (you can guess what the DVD button is for). Next we select the USB that we have plugged into one of our laptops USB ports. Then we click the BEGIN COPYING button and the first thing the program does is format our USB drive. Then it starts copying out files out of the ISO and constructing the USB as if it was a DVD. So now that the files are copying to the drive I’m going to warn you. We will error out here. This program was design for bootable ISO’s of which this one is NOT. No problem because what fails it the writing of the bootable data to the drive that isn’t there. No biggie…. Forget the STARTOVER button is even there and click the dialog’s CLOSE button and exit the program. Now go to Windows Explorer and navigate to the USB Device. You can now access everything and even add stuff to the drive. But for me I want to keep this drive for one purpose and that is to install VS2010 on various machines. So the only stuff I’ll add to this is a folder of notes on things on visual studio that I might want to put on other machines I’m installing VS2010 on to. So that is it. Have a nice day! The Ron

  Read the article

• Solaris 11 pkg fix is my new friend

  - by user12611829

  While putting together some examples of the Solaris 11 Automated Installer (AI), I managed to really mess up my system, to the point where AI was completely unusable. This was my fault as a combination of unfortunate incidents left some remnants that were causing problems, so I tried to clean things up. Unsuccessfully. Perhaps that was a bad idea (OK, it was a terrible idea), but this is Solaris 11 and there are a few more tricks in the sysadmin toolbox. Here's what I did. # rm -rf /install/* # rm -rf /var/ai # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 So far so good. Then comes an oops..... setup-service[168]: cd: /var/ai//service/.conf-templ: [No such file or directory] ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ This is where you generally say a few things to yourself, and then promise to quit deleting configuration files and directories when you don't know what you are doing. Then you recall that the new Solaris 11 packaging system has some ability to correct common mistakes (like the one I just made). Let's give it a try. # pkg fix installadm Verifying: pkg://solaris/install/installadm ERROR dir: var/ai Group: 'root (0)' should be 'sys (3)' dir: var/ai/ai-webserver Missing: directory does not exist dir: var/ai/ai-webserver/compatibility-configuration Missing: directory does not exist dir: var/ai/ai-webserver/conf.d Missing: directory does not exist dir: var/ai/image-server Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/cgi-bin Missing: directory does not exist dir: var/ai/image-server/images Group: 'root (0)' should be 'sys (3)' dir: var/ai/image-server/logs Missing: directory does not exist dir: var/ai/profile Missing: directory does not exist dir: var/ai/service Group: 'root (0)' should be 'sys (3)' dir: var/ai/service/.conf-templ Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_data Missing: directory does not exist dir: var/ai/service/.conf-templ/AI_files Missing: directory does not exist file: var/ai/ai-webserver/ai-httpd-templ.conf Missing: regular file does not exist file: var/ai/service/.conf-templ/AI.db Missing: regular file does not exist file: var/ai/image-server/cgi-bin/cgi_get_manifest.py Missing: regular file does not exist Created ZFS snapshot: 2012-12-11-21:09:53 Repairing: pkg://solaris/install/installadm Creating Plan (Evaluating mediators): | DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 3/3 0.0/0.0 0B/s PHASE ITEMS Updating modified actions 16/16 Updating image state Done Creating fast lookup database Done In just a few moments, IPS found the missing files and incorrect ownerships/permissions. Instead of reinstalling the system, or falling back to an earlier Live Upgrade boot environment, I was able to create my AI services and now all is well. # installadm create-service -n solaris11-x86 --imagepath /install/solaris11-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 130/130 264.4/264.4 0B/s PHASE ITEMS Installing new actions 284/284 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11-x86 Image path: /install/solaris11-x86 Refreshing install services Warning: mDNS registry of service solaris11-x86 could not be verified. Creating default-i386 alias Setting the default PXE bootfile(s) in the local DHCP configuration to: bios clients (arch 00:00): default-i386/boot/grub/pxegrub Refreshing install services Warning: mDNS registry of service default-i386 could not be verified. # installadm create-service -n solaris11u1-x86 --imagepath /install/solaris11u1-x86 \ -s [email protected] Warning: Service svc:/network/dns/multicast:default is not online. Installation services will not be advertised via multicast DNS. Creating service from: [email protected] DOWNLOAD PKGS FILES XFER (MB) SPEED Completed 1/1 514/514 292.3/292.3 0B/s PHASE ITEMS Installing new actions 661/661 Updating package state database Done Updating image state Done Creating fast lookup database Done Reading search index Done Updating search index 1/1 Creating i386 service: solaris11u1-x86 Image path: /install/solaris11u1-x86 Refreshing install services Warning: mDNS registry of service solaris11u1-x86 could not be verified. # installadm list Service Name Alias Of Status Arch Image Path ------------ -------- ------ ---- ---------- default-i386 solaris11-x86 on i386 /install/solaris11-x86 solaris11-x86 - on i386 /install/solaris11-x86 solaris11u1-x86 - on i386 /install/solaris11u1-x86 This is way way better than pkgchk -f in Solaris 10. I'm really beginning to like this new IPS packaging system.

  Read the article

• Blogging platform for shared hosting?

  - by Ankit

  First of all, this is not for flame wars. So, please do not bash some blogging platform :P I have a shared hosting account. I want to setup a blog on it. Now, the thing is that as it is shared hosting, I do not have as much bandwidth as some expensive hosting. I have tried using Wordpress with the caching plugins configured. It still does not seem to speed it much. Also if I create a simple PHP website, the speed is fine. Can someone suggest me some lightweight platform?

  Read the article

• Zen Coding and the Art of Rapid HTML Authoring

  The powerful new Zen Coding IDE plugin allows developers to write HTML with blazing speed.

  Read the article

• Loading class instance from XML with Texture2D

  - by Thegluestickman

  I'm having trouble with XML and XNA. I want to be able to load weapon settings through XML to make my weapons easier to make and to have less code in the actual project file. So I started out making a basic XML document, something to just assign variables with. But no matter what I changed it gave me a new error every time. The code below gives me a "XML element 'Tag' not found", I added and it started to say the variables weren't found. What I wanted to do in the XML file as well, was load a texture for the file too. So I created a static class to hold my texture values, then in the Texture tag of my XML document I would set it to that instance too. I think that's were the problems are occuring because that's where the "XML element 'Tag' not found" error is pointing me too. My XML document: <XnaContent> <Asset Type="ConversationEngine.Weapon"> <weaponStrength>0</weaponStrength> <damageModifiers>0</damageModifiers> <speed>0</speed> <magicDefense>0</magicDefense> <description>0</description> <identifier>0</identifier> <weaponTexture>LoadWeaponTextures.ironSword</weaponTexture> </Asset> </XnaContent> My Class to load the weapon XML: public class Weapon { public int weaponStrength; public int damageModifiers; public int speed; public int magicDefense; public string description; public string identifier; public Texture2D weaponTexture; } public static class LoadWeaponXML { static Weapon Weapons; public static Weapon WeaponLoad(ContentManager content, int id) { Weapons = content.Load<Weapon>(@"Weapons/" + id); return Weapons; } } public static class LoadWeaponTextures { public static Texture2D ironSword; public static void TextureLoad(ContentManager content) { ironSword = content.Load<Texture2D>("Sword"); } } I'm not entirely sure if you can load textures through XML, but any help would be greatly appreciated.

  Read the article

• EMC Makes Archiving, E-Discovery Go Further

  Centera gets new clustering abilities, and Data Domain gets indexing to help speed legal searches.

  Read the article

• Reflection: Is using reflection still "bad" or "slow"? What has changed with reflection since 2002?

  - by blesh

  I've noticed when dealing with Expressions or Expression Trees I'm using reflection a lot to set and get values in properties and what have you. It has occurred to me that the use of reflection seems to be getting more and more common. Things like DataAnotations for validation, Attribute heavy ORMs, etc. Have me wondering: What has changed since the days years and years ago when I used to be told to avoid reflection if at all possible? So what, if anything has changed? Is it just the speed of the machines? Have there been changes to the framework to speed up reflection? Or has nothing really changed? Is it still "bad" or "slow" to use reflection? EDIT: To clarify my question a little.

  Read the article

• Play PlayStation Games on a Rooted Nook Simple Touch

  - by Jason Fitzpatrick

  Just when you feel like you’ve seen it all, some guy comes along and shows you how he can play original PlayStation games on his ebook reader. Check out the video to see the surprisingly full-speed–albeit black and white–graphics in action. The secret sauce in Sean’s cool setup? He’s rooted the device and installed Free PlayStation Emulator (FPSE) on it–along with the NoRefresh hack–to enjoy touch-screen controls and PS emulation. The whole thing is shockingly smooth; once you get past the choppy intro videos, the games run at full speed. [via Hack A Day] HTG Explains: Why Do Hard Drives Show the Wrong Capacity in Windows? Java is Insecure and Awful, It’s Time to Disable It, and Here’s How What Are the Windows A: and B: Drives Used For?

  Read the article

• Oracle Open World starts on Sunday, Sept 30

  - by Mike Dietrich

  Oracle Open World 2012 starts on Sunday this week - and we are really looking forward to see you in one of our presentations, especially theDatabase Upgrade on SteriodsReal Speed, Real Customers, Real Secretson Monday, Oct 1, 12:15pm in Moscone South 307(just skip the lunch - the boxed food is not healthy at all): Monday, Oct 1, 12:15 PM - 1:15 PM - Moscone South - 307 Database Upgrade on Steroids:Real Speed, Real Customers, Real Secrets Mike Dietrich - Consulting Member Technical Staff, Oracle Georg Winkens - Technical Manager, Amadeus Data Processing Carol Tagliaferri - Senior Development Manager, Oracle  Looking to improve the performance of your database upgrade and learn about other ways to reduce upgrade time? Isn’t everyone? In this session, you will learn directly from Oracle’s Upgrade Development team about what you can do to speed things up. Find out about ways to reduce upgrade downtime such as using a transient logical standby database and/or Oracle GoldenGate, and get other hints and tips. Learn about new features that improve upgrade performance and reduce downtime. Hear Georg Winkens, DB Services technical manager from Amadeus, speak about his upgrade experience, and get real-life performance measurements and advice for a successful upgrade. . And don't forget: we already start on Sunday so if you'd like to learn about the SAP database upgrades at Deutsche Messe: Sunday, Sep 30, 11:15 AM - 12:00 PM - Moscone West - 2001Oracle Database Upgrade to 11g Release 2 with SAP Applications Andreas Ellerhoff - DBA, Deutsche Messe AG Mike Dietrich - Consulting Member Technical Staff, Oracle Jan Klokkers - Sr.Director SAP Development, Oracle Deutsche Messe began to use Oracle6 Database at the end of the 1980s and has been using Oracle Database technology together with SAP applications successfully since 2002. At the end of 2010, it took the first steps of an upgrade to Oracle Database 11g Release 2 (11.2), and since mid-2011, all SAP production systems there run successfully with Oracle Database 11g. This presentation explains why Deutsche Messe uses Oracle Database together with SAP applications, discusses the many reasons for the upgrade to Release 11g, and focuses on the operational top aspects from a DBA perspective. . And unfortunately the Hands-On-Lab is sold out already ... We would like to apologize but we have absolutely ZERO influence on either the number of runs or the number of available seats.  Tuesday, Oct 2, 10:15 AM - 12:45 PM - Marriott Marquis - Salon 12/13 Hands On Lab:Upgrading an Oracle Database Instance, Using Best Practices Roy Swonger - Senior Director, Software Development, Oracle Carol Tagliaferri - Senior Development Manager, Oracle Mike Dietrich - Consulting Member Technical Staff, Oracle Cindy Lim - PMTS, Oracle Carol Palmer - Principal Product Manager, Oracle This hands-on lab gives participants the opportunity to work through a database upgrade from an older release of Oracle Database to the very latest Oracle Database release available. Participants will learn how the improved automation of the upgrade process and the generation of fix-up scripts can quickly help fix database issues prior to upgrading. The lab also uses the new parallel upgrade feature to improve performance of the upgrade, resulting in less downtime. Come get inside information about database upgrades from the Database Upgrade development team. . See you soon

  Read the article

• Improving performance of fuzzy string matching against a dictionary [closed]

  - by Nathan Harmston

  Hi, So I'm currently working for with using SecondString for fuzzy string matching, where I have a large dictionary to compare to (with each entry in the dictionary has an associated non-unique identifier). I am currently using a hashMap to store this dictionary. When I want to do fuzzy string matching, I first check to see if the string is in the hashMap and then I iterate through all of the other potential keys, calculating the string similarity and storing the k,v pair/s with the highest similarity. Depending on which dictionary I am using this can take a long time ( 12330 - 1800035 entries ). Is there any way to speed this up or make it faster? I am currently writing a memoization function/table as a way of speeding this up, but can anyone else think of a better way to improve the speed of this? Maybe a different structure or something else I'm missing. Many thanks in advance, Nathan

  Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >