Search Results

Search found 58039 results on 2322 pages for 'windows xp'.

Page 94/2322 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • No "New Folder" button in windows 7

    - by user1125620
    My sibling's laptop is running windows 7 x64. The torrents folder in Documents doesn't show the New Folder button. ctrl+shift+n doesn't work either. I tried EVERYTHING here: Can't create new folder from anywhere in Windows 7 ..but nothing worked. As with the OP there, running the .reg file brings an error that says something about not being able to change the registry value while something is using it. I removed one entry at a time in the .reg file until I narrowed down the ones that were causing the problem, which were in HKEY_CLASSES_ROOT/CLSID. The only different reg value, however, was in HKEY_CLASSES_ROOT\CLSID{11dbb47c-a525-400b-9e80-a54615a090c0}\InProcServer32, for which the default value was %SystemRoot%\system32\explorerframe.dll and the value trying to be set ExplorerFrame.dll. I'm on windows 7 32bit and that's the same value I have for the entry, so I doubt that's it. The only thing I think is slightly off is that there is a user group with a strange name that only has execute and read access, and I can't grant it full control. Every time I try, it acts as if it works, but doesn't change it. I tried booting into safe mode and changing it, but it did the same thing. It is the folder where utorrent puts any new downloads, so it's possible utorrent did something, though that's never happened to me before. edit: I had renamed the folder to something else to avoid the problem, and then went onto my own computer to try to figure out what was wrong (I personally don't like using the touchpad on laptops). While searching, my sibling starting watching a movie. I minimized the movie and saw that the same thing had happened to the folder I renamed. Also changed was the file layout. It showed the different days and the files modified on those days. So, I was able to fix it by doing: Clicking Organize Layout Menu Bar On the menu bar clicking View Arrange By Folder

    Read the article

  • Backing up Windows machines using rsync over SSH

    - by user38118
    We have a number of Windows XP / Windows 7 machines which need to be backed up nightly to a Linux file server. We would like to do it with rsync and rsnapshot as that's what we're familiar with already from the rest of our Linux/FreeBSD machines. We tried DeltaCopy, but DeltaCopy proved to be troublesome- lots of problems getting it to log in via SSH automatically, and the Windows Scheduled Tasks seem to fail often. Is there a reliable way/application which can back up Windows machines via rsync to a r

    Read the article

  • availability of Win32_MountPoint and Win32_Volume on Windows XP?

    - by SteveC
    From the MSDN articles I've found -- http://msdn.microsoft.com/en-us/library/aa394515(v=VS.85).aspx -- Win32_Volume and Win32_MountPoint aren't available on Windows XP. However, I'm developing a C# app on Windows XP (64bit), and I can get to those WMI classes just fine. Users of my app will be on Windows XP sp2 with .Net 3.5 sp1. Googling around, I can't determine whether I can count on this or not. Am I successful on my system because of one or more of the following: - windows xp service pack 2? - visual studio 2008 sp1 was installed? - .Net 3.5 sp1? Should I use something other than WMI to get at the volume/mountpoint info? Below is sample code that's working... public static Dictionary<string, NameValueCollection> GetAllVolumeDeviceIDs() { Dictionary<string, NameValueCollection> ret = new Dictionary<string, NameValueCollection>(); // retrieve information from Win32_Volume try { using (ManagementClass volClass = new ManagementClass("Win32_Volume")) { using (ManagementObjectCollection mocVols = volClass.GetInstances()) { // iterate over every volume foreach (ManagementObject moVol in mocVols) { // get the volume's device ID (will be key into our dictionary) string devId = moVol.GetPropertyValue("DeviceID").ToString(); ret.Add(devId, new NameValueCollection()); //Console.WriteLine("Vol: {0}", devId); // for each non-null property on the Volume, add it to our NameValueCollection foreach (PropertyData p in moVol.Properties) { if (p.Value == null) continue; ret[devId].Add(p.Name, p.Value.ToString()); //Console.WriteLine("\t{0}: {1}", p.Name, p.Value); } // find the mountpoints of this volume using (ManagementObjectCollection mocMPs = moVol.GetRelationships("Win32_MountPoint")) { foreach (ManagementObject moMP in mocMPs) { // only care about adding directory // Directory prop will be something like "Win32_Directory.Name=\"C:\\\\\"" string dir = moMP["Directory"].ToString(); // find opening/closing quotes in order to get the substring we want int first = dir.IndexOf('"') + 1; int last = dir.LastIndexOf('"'); string dirSubstr = dir.Substring(first , last - first); // use GetFullPath to normalize/unescape any extra backslashes string fullpath = Path.GetFullPath(dirSubstr); ret[devId].Add(MOUNTPOINT_DIRS_KEY, fullpath); } } } } } } catch (Exception ex) { Console.WriteLine("Problem retrieving Volume information from WMI. {0} - \n{1}",ex.Message,ex.StackTrace); return ret; } return ret; }

    Read the article

  • Missing processor/memory counters in the Windows XP Performance Monitor application (perfmon)

    - by Jader Dias
    Perfmon is a Windows utility that helps the developer to find bottlenecks in his applications, by measuring system counters. I was reading a perfmon tutorial and from this list of essential counters I have found the following ones on my machine: PhysicalDisk\Bytes/sec_Total Network Interface\Bytes Total/Sec\nic name But I haven't found the following counters nowhere: Processor\% Processor Time_Total Process\Working Set_Total Memory\Available MBytes Where do I find them? Note that my Windows is pt-BR (instead of en-US). Where do I find language specific documentation for windows tools like PerfMon?

    Read the article

  • Advice for Windows XP Scripting, WSH versus PowerShell

    - by Greg Graham
    After much experience scripting in the Unix/Linux open-source world, using languages such as Bourne Shell, Perl, Python, and Ruby, I now find myself needing to do some Windows XP admin scripting. It appears that the legacy environment is Windows Script Host (WSH), which can use various scripting languages, but the primary language is VBScript, and is based on COM objects. However, the future appears to be Windows PowerShell, which is based on .NET. I haven't done Basic since Applesoft in the 70s, so I'm not keen on learning VBScript, although I did learn enough to write a small script to mount network drives. If I'm going to spend time to really learn this, I'm leaning towards investing my time in the .NET PowerShell environment, if it truly is the future. I did some C# Windows Forms programming a couple of years ago, so I have some exposure to .NET, which also makes PowerShell attractive. Understanding that no one has a crystal ball to predict the future of Microsoft, I would like hear from anyone who is a PowerShell user and thinks it's worthwhile, or if there is anyone that knows of serious drawbacks to PowerShell, and recommends that I stay away from it. Update: I ended up using WSH/VBScript for a particular script that I am installing as a startup script on user's Windows XP workstations. All I have to do is copy it to their Startup folder, and I'm done. However, I only learned enough WSH to accomplish this one job. I am glad to see that PowerShell is the future, and when I have more complicated scripting tasks, I'll to turn PowerShell.

    Read the article

  • Networking Problem MrxSmb event 50 "Delayed Write Failed" errors occurring all of the sudden

    - by Johnny Musso
    JUST THIS MONTH, we have started getting reports from a number of very stable clients that MrxSmb event id 50 errors keep appearing in their system event logs. Otherwise, they do not appear to have any networking problems except that there is a critical legacy application which seems to either be generating the MrxSmb errors or having errors occur because of them. The legacy application is comprised of 16 bit and 32 bit code and has not been changed or recompiled in many years. It has always been stable on Windows XP systems. The customers that have the problem usually have a small (5 clients or less) peer to peer network with all Windows XP systems. All service packs are loaded on the XP machines. Note: The only thing that seems to correct the problem is disabling opportunistic locking. I don't like this solution because it seems to slow down the network and sometimes causes record locking issues between users (on some networks). Also, this seems to have just started happening - as if a Windows update for XP has caused it? However, I have removed recent updates and it did not correct the issue. Thanks in advance for any help you can provide.

    Read the article

  • Remote desktop connection to network printer

    - by andand
    I'm trying to print a document from a remote WinXP machine to a network printer I use on a local Win7 machine using Remote Desktop. The network printer does not appear in the list of those available on the WinXP box. In more detail, the local machine runs Windows 7 (no admin rights) and connects to a network printer managed by a print server (i.e. not using a local TCP/IP Port). I have access to a Windows XP host on a separate network which I access using Remote Desktop. I would like to have print requests from the remote XP box forwarded to the network printer I use on the Windows 7 machine. The XP machine cannot access the print server I use on the Win7 machine nor can it create a TCP/IP port to connect directly to the printer (network configuration issues). After having consulting the KB312135 I confirmed the "Printers" option was selected in the Remote Desktop Client, Local Resources Tab, yet the network printer does not appear on the list of available printers on the XP box. Is this a lost cause or is there something else I haven't managed to locate yet?

    Read the article

  • Toshiba External Hard Drive freezes computer

    - by Ephraim
    I bought a Toshiba Canvio Basics E05A032BAU2XK Portable External 320GB 2.5 Hard Drive: My computer has two Os's on it Win7 and Win XP. I need both. The main one I use is XP. When booting my computer in any OS the computer and hard drive work fine. The same holds true for plugging in the hard drive while running Win7. However, when running WinXP, if the hard drive gets plugged in the computer freezes(my main point is that the HD is portable so it is essential that it does not do this, as I said I usually run XP). After reading some online forums I was informed that there is a compatibility issue with the newest version of Eset Smart Security(I still don't understand this because it works fine in Win7 or when connected on boot...). I disabled the AV and plugged in the HD... Walla! The comnputer did not freeze. However the disk is not recognized in explorer or disk management. In device manager I removed the device and did a scan and installation of device failed. It pretty much sounds like a driver issue but I cannot find any drivers for this HD. In fact, Toshiba claims that there are no downloadable drivers for it and that XP should take care of the drivers itself. What to do? As far as I can tell, all other USB devices work just fine on both OS. Please Help!

    Read the article

  • Unable to access network resources through VPN

    - by fbueckert
    I'm currently attempting to connect one of our computers in the office to a client VPN. My development machine is running Windows 7, and can connect and see resources just fine. The problem computer is running Windows XP. They're both within the same network. Using the same credentials at both computers, the VPN connection (using the built in Windows network connections) works just fine. So far, so good. An IP address is assigned, and comparing both machines shows they're still in the same subnet. The problem is that the XP machine cannot see ANY of the computers in the client network. I tried a tracert to a target machine on the Windows 7 box, and the first item that comes up is the .0 address. Pinging it gives responses. Trying it on the Windows XP machine, however, comes up with just timeouts. Trying to trace to www.google.com allows the address to resolve (probably part of the cached resolutions), but results in just timeouts. I double-checked to make sure that the Windows firewall was not on, and trying to open the settings brings up a notification that the firewall service wasn't running, which leads me to believe that it's definitely not on. From my best guess, I've managed to connect the XP machine to a black hole of some sort. There's obviously something strange going on, but I'm not sure where I should be looking.

    Read the article

  • User authentication -- username mismatch in IIS in ASP.NET application

    - by Cory Larson
    Last week, an employee's Active Directory username was changed (or a new one was created for them). For the purposes of this example, let's assume these usernames: Old: Domain\11111 New: Domain\22222 When this user now logs in using their new username, and attempts to browse to any one of a number of ASP.NET applications using only Windows Authentication (no Anonymous enabled), the system authenticates but our next layer of database-driven permissions prevents them from being authorized. We tracked it down to a mismatch of usernames between their logon account and who IIS thinks they are. Below are the outputs of several ASP.NET variables from apps running in a Windows 2008 IIS7.5 environment: Request.ServerVariables["AUTH_TYPE"]: Negotiate Request.ServerVariables["AUTH_USER"]: Domain\11111 Request.ServerVariables["LOGON_USER"]: Domain\22222 Request.ServerVariables["REMOTE_USER"]: Domain\11111 HttpContext.Current.User.Identity.Name: Domain\11111 System.Threading.Thread.CurrentPrincipal.Identity.Name: Domain\11111 From the above, I can see that only the LOGON_USER server variable has the correct value, which is the account the user used to log on to their machine. However, we use the "AUTH_USER" variable for looking up the database permissions. In a separate testing environment (completely different server: Windows 2003, IIS6), all of the above variables show "Domain\22222". So this seems to be a server-specific issue, like the credentials are somehow getting cached either on their machine or on the server (the former seems more plausible). So the question is: how do I confirm whether it's the user's machine or the server that is botching the request? How should I go about fixing this? I looked at the following two resources and will be giving the first one a try shortly: http://www.interworks.com/blogs/jvalente/2010/02/02/removing-saved-credentials-passwords-windows-xp-windows-vista-or-windows-7 http://stackoverflow.com/questions/2325005/classic-asp-request-servervariableslogon-user-returning-wrong-username/5299080#5299080 Thanks.

    Read the article

  • strange wpf errors on xp machine

    - by Yoav
    I created an application that has two windows. the second one is opened by .showDialog() command from the first window. on Windows 7 everything works fine but when running on XP the first window works fine but when trying to open the second window the application crash. exception message: Provide value on 'System.Windows.Baml2006.TypeConverterMarkupExtension' threw an exception. and now for the weird part: when changing the application and making the second window run first it opens without a problem. when removing the icon from the second window (it's the same file for both windows) it also runs fine. any ideas on how to solve this?

    Read the article

  • Changing windows Xp appearance or theme programatically

    - by Waseem
    The company I work for has windows xp installed and under group policy, I am not able to change the desktop appearnce or themes. Because admin has disabled the appearance and themes tab via group policy registry. I am looking for an application or Vb.net form which is able to switch the appearance and themes under limited access xp account. Your help would be higly appreciated..

    Read the article

  • moving from WinXP to WinServer in VmWare

    - by Alex
    I have a Vmware machine for.Net application testing. Current setup: Host OS: win7 Guest OS: Right now the guest OS is Win Xp Pro x64, which runs great with just 1 gigabyte of RAM and 10 gigs of disk space. * This part can be skipped * As I said, there was a program that I needed to test, but unfortunately, by default, Vmware installs crappy display drivers(called SVGA II) on XP machines and there is NO way to upgrade them! This resulted in my program's error (the program used SlimDX (DirectX wrapper) to do some stuff..). Eventually I found out that display drivers most certainly is the problem. For example, Windows 7 virtual machine uses SVGA 3D drivers and I have NO problems running my SlimDX-based program. Now, regarding Windows Server 2008! Apparently, WDDM driver is supported by WS2008, which means that I'll be able to install SVGA 3D and to test my DX apps. * end of skip * The questions are: Will WS2008 be as smooth with just 1 gig of RAM just like Win XP was? Will 10 gigs of HDD be enough? Or the server requires more? Will I be able to install .Net ver. 4 on WS2008? Are there any limitations that I need to be aware of as a .Net programmer? EDIT: I was hoping that WS2008 is XP-based, not Vista-vased/W7-based. In comparison, W7 virtual machine with 2 gigs of RAM and 2 proc cores nearly kills my Host OS. Whereas, WinXp runs extremely fast even with 1 core and 1 gig of RAM. That's the main reason why I want to try WS2008..

    Read the article

  • Application not working on Windows XP

    - by Jayesh
    Hello, I created a .NET 2.0 application on Windows 7. When I tried to run the .exe on my Windows XP machine [SP3 as well as SP2], it doesn't start up. It shows me a message that Windows has encountered a problem....send error report... Any known issues? Thanks for help!

    Read the article

  • Help in decide the partition to install ubuntu

    - by G.Ashwin kumar
    I have a PC running with windows 7 ultimate 64 bit version with 4 gig Ram. I have a 320 gig hard disk , in which I have allocated 120 gig for windows 7, 100 gig for NY files(named ashwin in windows) and rest 80-90 gig partitioned but empty NTFS partition.Now where do I install Ubuntu so that windows and data is safe. I got the option install with windows I selected it , it then shows select drive(SCSI1 (0,0,0) (sda) -320.1 GB ATA WDC WD3200AAJS-6) and allocate driver by dragging the divider below which shows 66.5gb and 59.3 GB respectively. Which one do I go with? I clicked advance partitioning it shows five devices: device , type, m.point ,size.(mb), used(mb)......... /dev/sda1, NTFS, 104 , 35 (windows 7 loader) /dev/sda2, NTFS, 104752, 23604 /dev/sda3, NTFS, 125829, 10161 /dev/sda5, NTFS, 89382, 3221 when I checked size in properties it showed name of drive according to windows, used.Gb, free, total. ashwin, 10.2, 115.7, 125.8 c drive, 23.6, 81.1, 104.8 new volume, 92.6mb, 89.3, 89.4 except mentioned everything in gigabytes.ignore the last dots. I want to install it in new volume or using that space how do I do it? Explain in detail I'm a beginner.

    Read the article

  • Add Network Printer drivers in Windows 7/Server 2008 R2?

    - by Matias Nino
    I'm running a 64 bit Windows 7 / Windows 2008 R2 workstation that I just installed. I need to add a printer that is shared on the network from a 32bit Windows 2000 print server. This is an HP LaserJet 5Si printer, the drivers for which HP tells me are automatically built into Windows 7/R2. However, whenever I connect to the printer or try to add it, I get the following screen: Upon clicking OK, I get this screen asking me to locate the driver: How can I possibly locate a driver that is SUPPOSED TO BE NATIVELY SUPPORTED on Windows 7/R2? The tough part is that this printer is one of many shared on a server and does not have a direct IP address. Even worse: I have no access to the print server so I cannot put the 64 bit drivers on there. Any ideas? UPDATE: HP doesn't make a Vista driver either. It claims it is natively supported by Vista and 7, which is true because I am able to create a local printer on a fake tcp/ip port and Windows lets me pick the proper driver. However, when adding from the network, Windows does not let me select a driver and demands an INF. I tried searching the entire sub-structure of the C:\Windows directory and could not find any INF files that contain HP information. The INF might be located somewhere in the Windows installation DVD, but all the files on the DVD are compressed and unrecognizable. UPDATE #2 I installed the proper printer driver as a local printer (with no printer attached) and it installed. However, this did not change the fact that it STILL asks me to provide drivers when connecting to the networked printer.

    Read the article

  • Can not boot windows XP from cloned hard disk - what can I do?

    - by Martin
    My configuration: a PC (some years old) with MSI K8N-Neo-4F Motherboard, 1 GB RAM. Disk 1 (Maxtor, SATA II, 250 GB): 2 Partitions, on Partition 1 (48 GB): Windows XP Professional (NTFS) on Partition 2 (190 GB): data (NTFS) I wanted to have a larger and faster disk (the PC is incredibly slow and permanently the disk is rattling when I try to open an application or during Windows startup), so I took Disk 2 (Seagate, Sata II, 500 GB), installed in the PC, created at first a 400 GB-partition at the end of the disk and cloned the data to it, which worked well Installed a swap partition and a partition for Ubuntu Linux 12.10 on the first "part" of the disk so I was able to boot Linux and the old Windows XP with the Linux "System selection" at startup. Now I wanted to move Windows XP to the new disk, deleted the Linux partitions cloned Windows XP to the new disk (with free tools - EASESUS), left both disks in the PC and tried to select the new hard drive during boot as boot partition. This did not work, the PC refused to boot from this second disk. I tried many things like making the boot partition on the 2nd drive "active" in the Windows System Preferences modifying the boot.ini file to boot from the second disk - tried to boot from it, but ended with an error message stating that it was not possible to boot from this disk because of a hardware failure or something else or so removing the original disk and plugging the new one on the same SATA port as the original one - also booting failed with an error message repairing the MBR by booting into recovery mode from the Windows XP Installation CD-ROM, selecting the second disk and doing "FIXMBR" which said that everything was fine with the MBR. after that at least the PC tried to boot from the newer disk and then startup was hanging during the blue screen with the Windows Logo.... no luck. ... deleting the cloned partition and cloning again - this time with Macrium Reflect Free version... - no success during booting. I tried a lot of things with no success, so I wonder what I am doing wrong?! What could I do to successfully clone my Win XP partition to replace the original disk by a larger one which is bootable.

    Read the article

  • How to chain GRUB2 for Ubuntu 10.04 from Truecrypt & its bootloader (multi boot alongside Windows XP partition)?

    - by Rob
    I want Truecrypt to ask for password for Windows XP as usual but with the standard [ESC] option, on selecting that, i.e via Escape key, I want it to find the grub for the (unencrypted) Ubuntu install. I've installed Windows XP on the 120Gb hard drive of a Toshiba NB100 netbook then partitioned to make room for Ubuntu 10.04 and installed that after the Windows XP install. When I encrypt Windows XP, Truecrypt will overwrite the grub entry in the master boot record (MBR), I believe (?) and I won't be able to choose between XP and Ubuntu anymore. So I need to restore it back. I've searched fairly extensively for answers on Ubuntu forums and elsewhere but have not yet found a complete answer that covers all eventualities, scenarios and error messages, or otherwise they talk of legacy GRUB and not GRUB2. Ubuntu 10.04 uses GRUB2. My setup: Partitions: Windows XP, NTFS (to be encrypted with Truecrypt), 40Gb /boot (Ext4, 1Gb) Ubuntu swap, 4Gb Ubuntu / (root) - main filesystem (20gb) NTFS share, 55Gb I know that the Truecrypt boot loader replaces the GRUB when boot up because I've already tried it on another laptop. I want boot loader screen to look something like the usual: Truecrypt Enter password: (or [ESC] to skip) password is for WindowsXP and on pressing [ESC] for it to find the Ubuntu grub to boot from Thanks in advance for your help. The key area of the problem is how to instruct Truecrypt when escape key is pressed, and how the Grub/Ubuntu can be made visible to the truecrypt bootloader to find it, when the esc key is pressed. Also knowing as chaining.

    Read the article

  • Using PHP OCI8 with 32-bit PHP on Windows 64-bit

    - by christopher.jones
    The world migration from 32-bit to 64-bit operating systems is gaining pace. However I've seen a couple of customers having difficulty with the PHP OCI8 extension and Oracle DB on Windows 64-bit platforms. The errors vary depending how PHP is run. They may appear in the Apache or PHP log: Unable to load dynamic library 'C:\Program Files (x86)\PHP\ext\php_oci8_11g.dll' - %1 is not a valid Win32 application. or Warning oci_connect(): OCIEnvNlsCreate() failed. There is something wrong with your system - please check that PATH includes the directory with Oracle Instant Client libraries Other than IIS permission issues a common cause seems to be trying to use PHP with libraries from an Oracle 64-bit database on the same machine. There is currently no 64-bit version of PHP on http://php.net/ so there is a library mismatch. A solution is to install Oracle Instant Client 32-bit and make sure that PHP uses these libraries, while not interferring with the 64-bit database on the same machine. Warning: The following hacky steps come untested from a Linux user: Unzip Oracle Instant Client 32-bit and move it to C:\WINDOWS\SYSWOW64\INSTANTCLIENT_11_2. You may need to do this in a console with elevated permissions. Edit your PATH environment variable and insert C:\WINDOWS\SYSTEM32\INSTANTCLIENT_11_2 in the directory list before the entry for the Oracle Home library. Windows makes it so all 32-bit applications that reference C:\WINDOWS\SYSTEM32 actually see the contents of the C:\WINDOWS\SYSWOW64 directory. Your 64-bit database won't find an Instant Client in the real, physical C:\WINDOWS\SYSTEM32 directory and will continue to use the database libraries. Some of our Windows team are concerned about this hack and prefer a more "correct" solution that (i) doesn't require changing the Windows system directory (ii) doesn't add to the "memory" burden about what was configured on the system (iii) works when there are multiple database versions installed. The solution is to write a script which will set the 64-bit (or 32-bit) Oracle libraries in the path as needed before invoking the relevant bit-ness application. This does have a weakness when the application is started as a service. As a footnote: If you don't have a local database and simply need to have 32-bit and 64-bit Instant Client accessible at the same time, try the "symbolic" link approach covered in the hack in this OTN forum thread. Reminder warning: This blog post came untested from a Linux user.

    Read the article

  • Uninstalling Reporting Server 2008 on Windows Server 2008

    - by Piotr Rodak
    Ha. I had quite disputable pleasure of installing and reinstalling and reinstalling and reinstalling – I think about 5 times before it worked – Reporting Server 2008 on Windows Server with the same year number in name. During my struggle I came across an error which seems to be not quite unfamiliar to some more unfortunate developers and admins who happen to uninstall SSRS 2008 from the server. I had the SSRS 2008 installed as named instance, SQL2008. I wanted to uninstall the server and install it to default instance. And this is when it bit me – not the first time and not the last that day . The setup complained that it couldn’t access a DLL: Error message: TITLE: Microsoft SQL Server 2008 Setup ------------------------------ The following error has occurred: Access to the path 'C:\Windows\SysWOW64\perf-ReportServer$SQL2008-rsctr.dll' is denied. For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1600.22&EvtType=0x60797DC7%25400x84E8D3C0 ------------------------------ BUTTONS: OK This is a screenshot that shows the above error: This issue seems to have a bit of literature dedicated to it and even seemingly a KB article http://support.microsoft.com/kb/956173 and a similar Connect item: http://connect.microsoft.com/SQLServer/feedback/details/363653/error-messages-when-upgrading-from-sql-2008-rc0-to-rtm The article describes issue as following: When you try to uninstall Microsoft SQL Server 2008 Reporting Services from the server, you may receive the following error message: An error has occurred: Access to the path 'Drive_Letter:\WINDOWS\system32\perf-ReportServer-rsctr.dll' is denied. Note Drive_Letter refers to the disc drive into which the SQL Server installation media is inserted. In my case, the Note was not true; the error pointed to a dll that was located in Windows folder on C:\, not where the installation media were. Despite this difference I tried to identify any processes that might be keeping lock on the dll. I downloaded Sysinternals process explorer and ran it to find any processes I could stop. Unfortunately, there was no such process. I tried to rerun the installation, but it failed at the same step. Eventually I decided to remove the dll before the setup was executed. I changed name of the dll to be able to restore it in case of some issues. Interestingly, Windows let me do it, which means that indeed, it was not locked by any process. I ran the setup and this time it uninstalled the instance without any problems:   To summarize my experience I should say – be very careful, don’t leave any leftovers after uninstallation – remove/rename any folders that are left after setup has finished. For some reason, setup doesn’t remove folders and certain files. Installation on Windows Server 2008 requires more attention than on Windows 2003 because of the changed security model, some actions can be executed only by administrator in elevated execution mode. In general, you have to get used to UAC and a bit different experience than with Windows Server 2003. Technorati Tags: SQL Server 2008,Windows Server 2008,SRS,Reporting Services

    Read the article

  • Add Zune Desktop Player to Windows 7 Media Center

    - by DigitalGeekery
    Are you a Zune owner who prefers the Zune player for media playback? Today we’ll show you how to integrate the Zune player with WMC using Media Center Studio. You’ll need to download Media Center Studio and the Zune Desktop player software. (See download links below) Also, make sure you have Media Center closed. Some of the actions in Media Center Studio cannot be performed while WMC is open. Open Media Center Studio and click on the Start Menu tab at the top of the application.   Click the Application button. Here we will create an Entry Point for the Zune player so that we can add it to Media Center. Type in a name for your entry point in the title text box. This is the name that will appear under the tile when added to the Media Center start menu. Next, type in the path to the Zune player. By default this should be C:\Program Files\Zune\Zune.exe. Note: Be sure to use the original path, not a link to the desktop icon.   The Active image is the image that will appear on the tile in Media Center. If you wish to change the default image, click the Browse button and select a different image. Select Stop the currently playing media from the When launched do the following: dropdown list.  Otherwise, if you open Zune player from WMC while playing another form of media, that media will continue to play in the background.   Now we will choose a keystroke to use to exit the Zune player software and return to Media Center. Click on the the green plus (+) button. When prompted, press a key to use to the close the Zune player. Note: This may also work with your Media Center remote. You may want to set a keyboard keystroke as well as a button on your remote to close the program. You may not be able to set certain remote buttons to close the application. We found that the back arrow button worked well. You can also choose a keystroke to kill the program if desired. Be sure to save your work before exiting by clicking the Save button on the Home tab.   Next, select the Start Menu tab and click on the next to Entry points to reveal the available entry points. Find the Zune player tile in the Entry points area. We want to drag the tile out onto one of the menu strips on the start menu. We will drag ours onto the Extras Library strip. When you begin to drag the tile, green plus (+) signs will appear in between the tiles. When you’ve dragged the tile over any of the green plus signs, the  red “Move” label will turn to a blue “Move to” label. Now you can drop the tile into position. Save your changes and then close Media Center Studio. When you open Media Center, you should see your Zune tile on the start menu. When you select the Zune tile in WMC, Media Center will be minimized and Zune player will be launched. Now you can enjoy your media through the Zune player. When you close Zune player with the previously assigned keystroke or by clicking the “X” at the top right, Windows Media Center will be re-opened. Conclusion We found the Zune player worked with two different Media Center remotes that we tested. It was a times a little tricky at times to tell where you were when navigating through the Zune software with a remote, but it did work. In addition to managing your music, the Zune player is a nice way to add podcasts to your Media Center setup. We should also mention that you don’t need to actually own a Zune to install and use the Zune player software. Media Center Studio works on both Vista and Windows 7. We covered Media Center Studio a bit more in depth in a previous post on customizing the Windows Media Center start menu. Are you new to Zune player? Familiarize yourself a bit more by checking out some of our earlier posts like how to update your Zune player, and experiencing your music a whole new way with Zune for PC.   Downloads Zune Desktop Player download Media Center Studio download Similar Articles Productive Geek Tips How To Rip a Music CD in Windows 7 Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Fixing When Windows Media Player Library Won’t Let You Add FilesBuilt-in Quick Launch Hotkeys in Windows Vista TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins

    Read the article

  • Vmware 7 AppHangB1 on windows 7 x64 (host) and windows xp (guest)

    - by frabiacca
    I'm having an issue running Windows XP professional guests using Vmware workstation 7.0.0 build-203739 in a Windows 7 Ultimate 64 bit host. My platform is a Dell Studio XPS 13 with 6GB RAM with an x64 processor. The VMWare freezes for up to 90s every 15 - 20 minutes, then just carries on as if nothing happened! I've no idea what the problem is ... Any idea?

    Read the article

  • Access Your favorite RSS Feeds in Windows Media Center

    - by Mysticgeek
    There are a lot of apps out there that help you organize and view your favorite RSS feeds. If you subscribe to a lot, sitting at a computer to view them all can be overwhelming. Today we take a look at accessing them from the couch with WMC. Using Media Center RSS Feeds To get RSS feeds to work with this plugin you need to subscribe to them through Internet Explorer.   The first thing you’ll need to do is activate Media Center RSS Reader (link below) on their site. Next install the Media Center RSS Reader plugin (link below). Installation is easy, just select the defaults when going through the wizard. Now when you open Media Center you’ll see the RSS icon in the main menu under Accessories. You can also find it in the Extras section. Enter in the username and activation code you received when you activated the plugin earlier. After activation you’ll see a list of the RSS feeds you currently subscribed through Internet Explorer. Click on the site feed you want to read and you’ll get a list of the different items available. Next you get and overview of the contents for the item you selected. From there you can show the page of the website containing that item. For any audio or video feeds you subscribe to, at the overview screen, click on Play to watch it. Then just sit back and watch your favorite video RSS feeds on WMC.   Media Center RSS Reader plugin will work with Vista and Windows 7. If you’re looking for a way to check out your RSS feeds in WMC this is a cool plugin for it. Download Media Center RSS Reader –You can activate it here as well. Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Integrate Boxee with Media Center in Windows 7Integrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideSchedule Updates for Windows Media Center TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more Download Microsoft Office Help tab

    Read the article

  • Attempted to dual boot with Windows and now can only run Ubuntu

    - by Zeusoflightning125
    Very recently, I decided to attempt to dual boot Ubuntu with my already installed windows 8. Everything worked perfectly, I manually set up disk partitions (this is all on 1 hard drive), and it loaded up Ubuntu fine. HOWEVER, now when I try to load up my computer it only has 2 options in the boot menu and both just load up Windows (both were something related to hard disk). I also can only boot from legacy hard disk things. (I already only was able to aside from my USB that I installed Windows from) The Windows files are still accessible from Ubuntu, but I cannot just load Windows. There is no option to. I also don't have the 2 buttons for each operating system I was expecting. I can only select the thing to load from BIOS. So, my question is, how do I load the Windows partition on my hard drive? I'm sorry if I'm a bit clueless I am just new to both Linux and dual-booting.

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >