active attr - Page 95 - Developer IT

change images by clicking left and right

- by Qin

I want to display an image in the center of the page, then 2 buttons, left, and right, when I click on left, the image changes to previous one, and move to next image by clicking right. And my question is, the code doesn't work..=.=, very obvious, can anybody tell me where the mistakes are? <table id="frontpage"> <tr> <td><input type="button" id="left" value="left"/></td> <td><img id="image" alt="Image" src="./image/guildwars2/gw2_fight.jpg"/></td> <td><input type="button" id="right" value="right"/></td> </tr> </table> $(document).ready(function(){ var image=new Array(); var current=0; image[0]=new Image(); image[0].src="./image/guildwars2/gw2_fight.jpg"; image[1]=new Image(); image[1].src="./image/diablo3/d3.jpg"; image[2]=new Image(); image[2].src="./image/dota2/catOnWater.jpg"; $("#left").click(function(){ if(current-1<0){ current=image.length-1; $("#image").attr("src")=image[current].src; } else{ --current; $("#image").attr("src")=image[current].src; } }); $("#right").click(function(){ if(current+1>image.length-1){ current=0; $("#image").attr("src")=image[current].src; } else{ ++current; $("#image").attr("src")=image[current].src; } }); })

Read the article

jQuery toggle() with unknown initial state

- by Jason Morhardt

I have a project that I am working on that uses a little image to mark a record as a favorite on multiple rows in a table. The data gets pulled from a DB and the image is based on whether or not that item is a favorite. One image for a favorite, a different image if not a favorite. I want the user to be able to toggle the image and make it a favorite or not. Here's my code: $(function () { $('.FavoriteToggle').toggle( function () { $(this).find("img").attr({src:"../../images/icons/favorite.png"}); var ListText = $(this).find('.FavoriteToggleIcon').attr("title"); var ListID = ListText.match(/\d+/); $.ajax({ url: "include/AJAX.inc.php", type: "GET", data: "action=favorite&ItemType=0&ItemID=" + ListID, success: function () {} }); }, function () { $(this).find("img").attr({src:"../../images/icons/favorite_not.png"}); var ListText = $(this).find('.FavoriteToggleIcon').attr("title"); var ListID = ListText.match(/\d+/); $.ajax({ url: "include/AJAX.inc.php", type: "GET", data: "action=favorite&ItemType=0&ItemID=" + ListID, success: function () {} }); } ); }); Works great if the initial state is not a favorite. But you have to double click to get the image to change if it IS a favorite initially. This causes the AJAX to fire twice and essentially make it a favorite then not a favorite before the image responds. The user thinks he's made it a favorite because the image changed, but in fact, it's not. Help anybody?

Read the article

getting page info from a webpage while sharing facebook style

- by user556167

Hi all. I am writing an app to share a page to friends when browsing. To this end, I can get the url of the page to my app and display it on the screen. Could anyone tell me, how to improve this, to show the headline of the page and the picture of a page as it appears when a page is being shared to friends on facebook. Here is the code to get and display the url of the page: Intent intent = getIntent(); String action = intent.getAction(); String type = intent.getType(); String mNewLinkUrl=""; if (action != null && type != null && Intent.ACTION_SEND.equals(action) && "text/plain".equals(type)){ mNewLinkUrl = intent.getStringExtra(Intent.EXTRA_TEXT); } TextView ptext = (TextView) findViewById(R.id.pagetext); ptext.append("\n"+mNewLinkUrl); Any insight will be appreciated. //update 1 found a method: use Jsoup to download the html as a Document. And use Elements and Element to get the data. For eg, the following is the code to get the links in imports in the html page: Elements imports = doc.select("link[href]"); for (Element link : imports) { Log.d(TAG,"link.tagName()"+link.tagName()+"link.attr(abs:href)"+link.attr("abs:href") +"link.attr(rel)"+link.attr("rel")); } But I am not able to figure out what attributes facebook exactly gets. Can anyone help me in this? Thank you.

Read the article

Is it possible to get multiple forms to work with one ajax post function

- by Scarface

Hey guys I have a system where there is one form for each friend you have and I used to have an ajax post function for each form, but I want to save code and was wondering if it was possible to get multiple forms to work with just one post function. If anyone has any advice on how to achieve this I would appreciate it. For example <div id="message"> <form id='submit' class='message-form' method='POST' > <input type='hidden' id='to' value='friend1' maxlength='255' > Subject<br><input type='text' id='subject' maxlength='50'><br> Message<br><textarea id='message2' cols='50' rows='15'></textarea> <input type='submit' id='submitmessage' class='responsebutton' value='Send'> </form> </div> $(document).ready(function(){ $(".message-form").submit(function() { $("#submitmessage").attr({ disabled:true, value:\"Sending...\" }); var to = $('#to').attr('value'); var subject = $('#subject').attr('value'); var message = $('#message2').attr('value'); $.ajax({ type: "POST", url: "messageprocess.php", data: 'to='+ to + '&subject=' + subject + '&message=' + message, success: function(response) { if(response == "OK") { $('.message-form').html("<div id='message'></div>"); $('#message').html("<h2>Email has been sent!</h2>") .append("<p>Please wait...</p>") .hide() .fadeIn(1500, function() { $('#message').append(\"<img id='checkmark' src='images/check.png' />\"); });

Read the article

JQuery, AJAX: Trying AJAX for the first time but cant get this to work...

- by fwaokda

Trying to get the code below to work but the success doesn't execute - the error does. How can I get more detailed information on what is exactly going wrong? I'll include the code for next.php in a pastebin link also. Thanks. [next.php: http://pastebin.com/Gnu2AfU8 ] $("a#next").click(function() { $.ajax({ type : 'POST', url : 'next.php', dataType : 'json', data : { nextID : $("a#next").attr("rel") }, success : function ( data ) { $("img#spotlight").attr("src",data.spotlightimage); $("div#showcase h1").text(data.title); $("div#showcase h2").text(data.subtitle); for(var i=0; i < data.size; i++) { $("ul#features").append("<li>").text(data.feature+i).append("</li>"); } $("div#showcase p").text(data.description); for(i=1; j < data.picsize; i++) { $("div.thumbnails ul").append("<li>").text(data.image+i).append("</li>"); } $("a#next").attr("rel", $a("a#next").attr("rel") + 1); }, error : function ( XMLHttpRequest, textStatus, errorThrown) { $("div#showcase h1").text("An error has occured."); } }); });

Read the article

Why is my rspec test failing?

- by Justin Meltzer

Here's the test: describe "admin attribute" do before(:each) do @user = User.create!(@attr) end it "should respond to admin" do @user.should respond_to(:admin) end it "should not be an admin by default" do @user.should_not be_admin end it "should be convertible to an admin" do @user.toggle!(:admin) @user.should be_admin end end Here's the error: 1) User password encryption admin attribute should respond to admin Failure/Error: @user = User.create!(@attr) ActiveRecord::RecordInvalid: Validation failed: Email has already been taken # ./spec/models/user_spec.rb:128 I'm thinking the error might be somewhere in my data populator code: require 'faker' namespace :db do desc "Fill database with sample data" task :populate => :environment do Rake::Task['db:reset'].invoke admin = User.create!(:name => "Example User", :email => "[email protected]", :password => "foobar", :password_confirmation => "foobar") admin.toggle!(:admin) 99.times do |n| name = Faker::Name.name email = "example-#{n+1}@railstutorial.org" password = "password" User.create!(:name => name, :email => email, :password => password, :password_confirmation => password) end end end Please let me know if I should reproduce any more of my code. UPDATE: Here's where @attr is defined, at the top of the user_spec.rb file: require 'spec_helper' describe User do before(:each) do @attr = { :name => "Example User", :email => "[email protected]", :password => "foobar", :password_confirmation => "foobar" } end

Read the article

Checkbox not working properly for IE with jquery

- by wildanjel

Hi, I am trying using several asp.net checkboxes on a page, disabling them accordingly. <asp:CheckBox ID='chkMenuItem' runat='server' CssClass='HiddenText' Text='Test' onclick='<%#String.Format("checkChild({0});", Eval("id")) %>' /> on javascript, I am using the following code function checkChild(id) { for (i = 0; i < $("input[id*=hdnParentMenuItemID]").length; i++) { if ($('input[id*=hdnParentMenuItemID]')[i].value.split(':')[0] == id) { var childID = $('input[id*=hdnParentMenuItemID]')[i].value.split(':')[1]; if ($("#" + childID).attr("disabled")) //$("#" + childID).attr('disabled', ''); $("#" + childID).removeAttr("disabled"); else $("#" + childID).attr('disabled', true); } } } Now is the checkboxes are disabled once the page is loaded, the removeAttr section doesn't work. I tried to step through the debugger and the logic works perfectly fine. If the checkboxes aren't disabled on page load, the code works fine. I tried replacing disabled 'attributes' with 'checked' to see if the other attributes work fine and it works perfectly fine. I tried $("#" + childID).attr('disabled', ''); but it didnt work either. Note: It works perfect on FF and Chrome but doesnt work in IE. Thanks,

Read the article

Having trouble using jQuery's .animate() to animate a div from left to right, right to left?

- by Alex

Hello, I seem to be having difficulties using jQuery .animate() to animate an absolutely positioned div from right to left on a button click, and left to right on another button click. I was wondering if you would be willing to help me understand what I'm doing wrong? Thanks. Below is my relevant CSS, HTML, and jQuery code. I can click the #moveLeft button and it wil indeed animate it to the left, but when I click the #moveRight button, nothing happens. Where am I going wrong? Thanks!! CSS #scorecardTwo { position:absolute; padding:5px; width: 300px; background-color:#E1E1E1; right:0px; top:0px; display:none; } HTML text text Left Right jQuery $("#scorecardTwo").fadeIn("slow"); $("#moveLeft").bind("click", function() { var config = { "left" : function() { return $(this).offset().left; }, "right" : function() { return $("body").innerWidth() - $K("#scorecardTwo").width(); } }; $("#scorecardTwo").css(config).animate({"left": "0px"}, "slow"); $(this).attr("disabled", "disabled"); $("#moveRight").attr("disabled", ""); }); $("#moveRight").bind("click", function() { var config = { "left" : function() { return $(this).offset().left; }, "right" : function() { return $("body").innerWidth() - $K("#scorecardTwo").width(); } }; $("#scorecardTwo").css(config).animate({"right" : "0px"}, "slow"); $(this).attr("disabled", "disabled"); $("#moveLeft").attr("disabled", ""); });

Read the article

Why does cloning the django inline formsets result to forms with similar ids and names?

- by user1289167

In my project I use django inline formsets. I got the jquery to clone the formsets but unfortunately the cloned forms have the same names and ids and so data entered in the last one overwrites the data from the first form. What could I be doing wrong? Here is the script: <script type="text/javascript">> function cloneMore(selector, type) { var newElement = $(selector).clone(true); var total = $('#id_' + type + '-TOTAL_FORMS').val(); newElement.find(':input').each(function() { var name = $(this).attr('name').replace('-' + (total-1) + '-','-' + total + '-'); var id = 'id_' + name; $(this).attr({'name': name, 'id': id}).val('').removeAttr('checked'); }); newElement.find('label').each(function() { var newFor = $(this).attr('for').replace('-' + (total-1) + '-','-' + total + '-'); $(this).attr('for', newFor); }); total++; $('#id_' + type + '-TOTAL_FORMS').val(total); $(selector).after(newElement); } </script>

Read the article

Retrieving an element by array index in jQuery vs the each() function.

- by Alex Ciminian

I was writing a "pluginable" function when I noticed the following behavior (tested in FF 3.5.9 with Firebug 1.5.3). $.fn.computerMove = function () { var board = $(this); var emptySquares = board.find('div.clickable'); var randPosition = Math.floor(Math.random() * emptySquares.length); emptySquares.each(function (index) { if (index === randPosition) { // logs a jQuery object console.log($(this)); } }); target = emptySquares[randPosition]; // logs a non-jQuery object console.log(target); // throws error: attr() not a function for target board.placeMark({'position' : target.attr('id')}); } I noticed the problem when the script threw an error at target.attr('id') (attr not a function). When I checked the log, I noticed that the output (in Firebug) for target was: <div style="width: 97px; height: 97px;" class="square clickable" id="8"></div> If I output $(target), or $(this) from the each() function, I get a nice jQuery object: [ div#8.square ] Now here comes my question: why does this happen, considering that find() seems to return an array of jQuery objects? Why do I have to do $() to target all over again? [div#0.square, div#1.square, div#2.square, div#3.square, div#4.square, div#5.square, div#6.square, div#7.square, div#8.square] Just a curiosity :).

Read the article

bonding module parameters are not shown in /sys/module/bonding/parameters/

- by c4f4t0r

I have a server with Suse 11 sp1 kernel 2.6.32.54-0.3-default, with modinfo bonding i see all parameters, but under /sys/module/bonding/parameters/ not modinfo bonding | grep ^parm parm: max_bonds:Max number of bonded devices (int) parm: num_grat_arp:Number of gratuitous ARP packets to send on failover event (int) parm: num_unsol_na:Number of unsolicited IPv6 Neighbor Advertisements packets to send on failover event (int) parm: miimon:Link check interval in milliseconds (int) parm: updelay:Delay before considering link up, in milliseconds (int) parm: downdelay:Delay before considering link down, in milliseconds (int) parm: use_carrier:Use netif_carrier_ok (vs MII ioctls) in miimon; 0 for off, 1 for on (default) (int) parm: mode:Mode of operation : 0 for balance-rr, 1 for active-backup, 2 for balance-xor, 3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, 6 for balance-alb (charp) parm: primary:Primary network device to use (charp) parm: lacp_rate:LACPDU tx rate to request from 802.3ad partner (slow/fast) (charp) parm: ad_select:803.ad aggregation selection logic: stable (0, default), bandwidth (1), count (2) (charp) parm: xmit_hash_policy:XOR hashing method: 0 for layer 2 (default), 1 for layer 3+4 (charp) parm: arp_interval:arp interval in milliseconds (int) parm: arp_ip_target:arp targets in n.n.n.n form (array of charp) parm: arp_validate:validate src/dst of ARP probes: none (default), active, backup or all (charp) parm: fail_over_mac:For active-backup, do not set all slaves to the same MAC. none (default), active or follow (charp) in /sys/module/bonding/parameters ls -l /sys/module/bonding/parameters/ total 0 -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_grat_arp -rw-r--r-- 1 root root 4096 2013-10-17 11:22 num_unsol_na I found some of this parameters under /sys/class/net/bond0/bonding/, but when i try to change one i got the following error echo layer2+3 > /sys/class/net/bond0/bonding/xmit_hash_policy -bash: echo: write error: Operation not permitted

Read the article

Understanding Linux SCSI queue depths

- by Troels Arvin

I'm experimenting with the effects of different SCSI queue depth values on a Dell server running CentOS Linux 5.4 (x86_64). The server has two QLogic QLE2560 FC HBAs connected via multipathing to a storage system. The storage system has allocated two LUNs to the server, each connected through four paths in an active-active-active-active round-robin configuration. All in all, the two LUNs exist as eight /dev/sdX devices, represented by two devices in /dev/mpath. I currently adjust the queue depth values in /etc/modprobe.conf and check the result (after rebooting) by looking in the seventh column of /proc/scsi/sg/devices. Two questions related to that: Is there a way to adjust queue depths without rebooting or unloading the qla2xxx kernel module? E.g., can I echo a new queue depth value into some /proc or /sys-like file to update the queue depth? If I set the queue depth to 128, is that 128 in total for all devices handled by the qla2xxx module?, or 128 for each HBA? (256 in total), or 128 for each of the eight /dev/sdX devices (1024 in toal)?, or 128 for each of the two /dev/mpath/... devices (256 in total)? This is important for me to know so that my server doesn't flood the storage system, affecting other servers connected to it.

Read the article

IPMI not fucntioning with Network Bonding

- by muhammed sameer

Hey, I am having problems with running IPMI on my servers that have network bonding enabled. Platform: CentOS release 5.3 (Final) Kernel: 2.6.18-92.el5 64bit Dell PowerEdge 1950 Ethernet controller: Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet I have bonded the interface eth0 and eth1 as active passive, with eth0 as the active interface, below is conf description from /proc Bonding Mode: fault-tolerance (active-backup) Primary Slave: eth0 Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 30 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cd Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:22:19:56:b9:cf My IPMI device is as follows IPMI Device Information Interface Type: KCS (Keyboard Control Style) Specification Version: 2.0 I2C Slave Address: 0x10 NV Storage Device: Not Present Base Address: 0x0000000000000CA8 (I/O) Register Spacing: 32-bit Boundaries I Have used openIPMI as well as freeipmi both to control the chassis via the IPMI card, but on servers which have bonding enabled, the command times out, below is the full run of the command with debug info. ipmi_lan_send_cmd:opened=[0], open=[4482848] IPMI LAN host 70.87.28.115 port 623 Sending IPMI/RMCP presence ping packet ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed ipmi_lan_send_cmd:opened=[1], open=[4482848] No response from remote controller Get Auth Capabilities command failed Error: Unable to establish LAN session Failed to open LAN interface Unable to get Chassis Power Status On the other hand I configured IPMI on a box with the same specs as mentioned above without bonding and IPMI works perfectly. Has anyone faced this problem with IPMI + Bonding ? I would be thankful is someone helps circumvent this issue. Muhammed Sameer

Read the article

raid 1 and high load average

- by melocoton

i have a server with high load average, I think the problem is the raid 1. cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb1[1] sda1[0] 256896 blocks [2/2] [UU] md3 : active raid1 sdb3[1] sda3[0] 2562240 blocks [2/2] [UU] md4 : active raid1 sdb5[1] sda5[0] 958566272 blocks [2/2] [UU] md1 : active raid1 sdb2[1] sda2[0] 15366080 blocks [2/2] [UU] model name : Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz Linux 2.6.18-164.6.1.el5.centos.plus (local) 04/19/2010 avg-cpu: %user %nice %system %iowait %steal %idle 17.37 0.01 6.02 26.17 0.00 50.43 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sda 61.09 562.65 893.73 1557214 2473546 sda1 0.01 0.27 0.02 751 42 sda2 6.11 195.50 169.78 541075 469888 sda3 0.01 0.23 0.00 641 0 sda4 0.00 0.01 0.00 18 0 sda5 54.96 366.54 723.94 1014449 2003616 sdb 54.40 433.22 893.73 1199015 2473546 sdb1 0.01 0.16 0.02 436 42 sdb2 5.31 169.00 169.78 467729 469888 sdb3 0.01 0.31 0.00 865 0 sdb4 0.00 0.00 0.00 10 0 sdb5 49.05 263.65 723.94 729695 2003616 md1 29.96 364.39 166.68 1008498 461312 md4 124.15 630.07 713.28 1743822 1974112 md3 0.05 0.43 0.00 1192 0 md0 0.04 0.32 0.00 872 10 dm-0 7.96 83.29 23.02 230530 63720 dm-1 3.67 51.81 2.73 143394 7560 dm-2 7.63 67.76 27.35 187546 75696 dm-3 8.20 134.60 14.02 372514 38792 dm-4 5.90 10.66 39.35 29498 108912 dm-5 17.39 24.52 121.79 67850 337080 dm-6 27.19 229.60 139.89 635442 387168 dm-7 0.14 1.07 0.28 2970 776 dm-8 25.84 4.23 202.89 11698 561536 dm-9 14.77 8.38 112.35 23202 310960 dm-10 5.29 12.78 29.55 35376 81784 dm-11 0.16 1.25 0.05 3450 128 the server runs lvm in the md4

Read the article

mysqld causes high CPU load

- by Radu

Read the article

ISA 2006 SP1 - SSL Client Certificate Authentication in Workgroup Environment

- by JoshODBrown

We have an IIS6 website that was previously published using an ISA 2006 SP1 standard server publishing rule. In IIS we had required a client certificate be provided before the website could be accessed... this all worked fine and dandy. Now we wish to use a web publishing rule on ISA 2006 SP1 for this same website. However, it seems the client certificate doesn't get processed now, so of course the user can't access the website. I've read a few articles stating the CA for the certificate needs to be installed in the trusted root certificate authorities store on the ISA Server (i have done this), as well as installing the client certificate on the ISA Server (done as well). I have also verified that the ISA Server is able to access the CRL for our CA no problem... In the listener properties for the web publishing rule, under Authentication, and Client Authentication Method, there is an option for SSL Client Certificate Authentication... i select this, but it appears the only Authentication Validation Method selectable is Windows (Active Directory).... there is no Active Directory in this environment. When i configure the rule with the defaults, I then try to hit my website and it prompts for my certificate, i choose it and hit ok... then I'm given the following error Error Code: 500 Internal Server Error. The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. (12202) I check the event logs on the ISA Server and in Security Logs, i see Event ID 536, Failure Aud. The reason: The NetLogon component is not active. I think this is pretty obvious since there is no active directory available. Is there a way to make this web publishing rule work using client certificates in this workgroup environment? Any suggestions or links to helpful documents would be greatly appreciated!

Read the article

cloning a kvm guest os to a vmdk file

- by Bond

I have a production environment where I am having 4 Guest OS running on a Ubuntu server which uses kvm. These OS are in an LVM based setup.I want these Virtual Machines to be in a vmdk format also.Where people would do experiments with these Virtual Machines so this in a vmware environment (or it can be Xen too) would be different from the kvm server.I would not have any control on that other environment so I want to give people vmdk images of these virtual machines. The production Virtual Machines will still keep running on kvm server but the VMs on which experiments would be done would be of type vmdk.(vmdk is a constraint) Here is output of lvscan ACTIVE '/dev/abcd/lvm1' [100.00 GiB] inherit ACTIVE '/dev/abcd/lvm2' [150.00 GiB] inherit ACTIVE '/dev/abcd/lvm3' [50.00 GiB] inherit ACTIVE '/dev/abcd/lvm4' [100.00 GiB] inherit I was reading man page of qemu-img and what I understand is I need to first create a qcow image file which I need to populate and then convert that to a vmdk file. Is that understanding correct? Now suppose /dev/abcd/lvm4 is the virtual machine with which I am going to start this experiment.I can shutdown the production VMs for some time to do this. So is the following way correct to go on server 1 (where kvm is running) qemu-img convert -c -f raw -O vmdk /dev/abcd/lvm4 /backup/lvm4.img or it will affect the lvm4 on kvm server 1. I do not want the VM running on original server to at all loose its any of the content but also have a vmdk file for each of the Guest OS on kvm. Before I proceed with any of the above things on the production machine I just want to make sure that I am doing the correct thing so I asking here.

Read the article

EMC VNX iSCSI setup - unsure about SP/port assignment

- by pauska

We have a new VNX5300 waiting to get configured, and I need to plan out the network infrastructure before the EMC tech arrives. It has 4x1gbit iSCSI per SP (8 ports in total), and I'd like to get the most out of the performance until we jump over to 10gig iSCSI. From what I can read from the docs - the recommendation is to use only two ports per SP, with 1 active and 1 passive. Why is this? It seems kind of pointless to have quad-port i/o-modules and then recommend to not use more than two of them? Also - I'm a bit unsure about the zoning. The best practices guide state that you should separate each port on each SP from each other on different logical networks. Does this mean that I have to create 4 logical networks to be able to use all 8 ports? It also gives the following example: Does this mean that A0 and B0 should sit on the same physical switch aswell? Won't this make all traffic go on one switch (if both A1 and B1 are passive)? Edit: Another brainpuzzle I don't get it - each host (as in server) should not have more iSCSI bandwidth available than the storage processor. What on earth does this matter? If serverA have 1gbit and serverB have 100mbit, then the resulting bandwith between them is 100mbit. How can this result in some kind of oversubscription? Edit4: Wait, what. Active and passive ports? The VNX runs in a ALUA configuration with asymmetrical active/active.. there shouldn't be any passive ports, only preferred ones..

Read the article

Best Practices for adding Exchange Archive to current 3 server setup

- by ADquestion

I'm looking to add an Archive Database (which I know is just a Mailbox Database) to our current Exchange 2010 environment. I have done this in the past at a previous job, but we had a simpler setup than at this current job. I've been trying to find some best practices to make sure it's setup in an ideal way, but so far not finding the details I would prefer. Hoping someone on here can give me a few pointers. Currently we have a 3 server setup, Server1, Server2 and Server3. Three databases of course, DB1, DB2 and DB3. We have a DAG setup between them. Server1 has DB1 and DB3 on it, DB1 is not active, DB3 is active. Server2 has DB1 and DB2 on it, both are active. Server3 has DB2 and DB3 on it, both are not active. All three servers are virtual (VMware). Each one is setup identical to the other as follows: C:\ 60GB - OS E:\ 600GB - DB (currently only 90GB used, pointing to Datastore just for Server2) F:\ 200GB - Log (2GB used, pointing to same Datastore as above) G:\ 200GB - Restore (0 used, pointing to same Datastore as above) The drives are all set to Thin Provisioning, and it looks as though I have 600GB of available space. They have not been on Exchange that long and only have about 70GB worth of PSTs to import back in that will be going to the Archive Database, plus anything older than 2 years from their current inbox that will be moved into there. I was considering placing the Archive DB on the E:\ drive of Server3 (only) like the current DB, but wasn't sure if that was acceptable. I don't plan on setting the Archive DB up with the DAG, just plan on having it as a single repository for older emails and manually back it up every now and then. If anyone has any suggestions on this I would appreciate it the input. I've done it on a slightly smaller scale before and it worked well, but like to think it through before pulling the trigger, especially at a new job. :) Thanks again!

Read the article

How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

- by Stephen

I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

Read the article

Under FreeBSD, can a VLAN interface have a smaller MTU than the primary interface?

- by larsks

I have a system with two physical interfaces, combined into a LACP aggregation group. That LACP channel has two VLANs, one untagged (the "native vlan") and one using VLAN tagging. This gives us: lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=19b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4> ether 00:25:90:1d:fe:8e inet 10.243.24.23 netmask 0xffffff00 broadcast 10.243.24.255 media: Ethernet autoselect status: active laggproto lacp laggport: em1 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> laggport: em0 flags=1c<ACTIVE,COLLECTING,DISTRIBUTING> vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=3<RXCSUM,TXCSUM> ether 00:25:90:1d:fe:8e inet 10.243.16.23 netmask 0xffffff80 broadcast 10.243.16.127 media: Ethernet autoselect status: active vlan: 610 parent interface: lagg0 Is it possible to set a 9K MTU on lagg0 while preserving the 1500 byte MTU on vlan0? Normally I would simply try this out, but this is actually on a vendor-supported platform and I am loathe to make changes "behind the back" of their administration interface. This system is roughly FreeBSD 7.3.

Read the article

Unusually high dentry cache usage

- by Wolfgang Stengel

Problem A CentOS machine with kernel 2.6.32 and 128 GB physical RAM ran into trouble a few days ago. The responsible system administrator tells me that the PHP-FPM application was not responding to requests in a timely manner anymore due to swapping, and having seen in free that almost no memory was left, he chose to reboot the machine. I know that free memory can be a confusing concept on Linux and a reboot perhaps was the wrong thing to do. However, the mentioned administrator blames the PHP application (which I am responsible for) and refuses to investigate further. What I could find out on my own is this: Before the restart, the free memory (incl. buffers and cache) was only a couple of hundred MB. Before the restart, /proc/meminfo reported a Slab memory usage of around 90 GB (yes, GB). After the restart, the free memory was 119 GB, going down to around 100 GB within an hour, as the PHP-FPM workers (about 600 of them) were coming back to life, each of them showing between 30 and 40 MB in the RES column in top (which has been this way for months and is perfectly reasonable given the nature of the PHP application). There is nothing else in the process list that consumes an unusual or noteworthy amount of RAM. After the restart, Slab memory was around 300 MB If have been monitoring the system ever since, and most notably the Slab memory is increasing in a straight line with a rate of about 5 GB per day. Free memory as reported by free and /proc/meminfo decreases at the same rate. Slab is currently at 46 GB. According to slabtop most of it is used for dentry entries: Free memory: free -m total used free shared buffers cached Mem: 129048 76435 52612 0 144 7675 -/+ buffers/cache: 68615 60432 Swap: 8191 0 8191 Meminfo: cat /proc/meminfo MemTotal: 132145324 kB MemFree: 53620068 kB Buffers: 147760 kB Cached: 8239072 kB SwapCached: 0 kB Active: 20300940 kB Inactive: 6512716 kB Active(anon): 18408460 kB Inactive(anon): 24736 kB Active(file): 1892480 kB Inactive(file): 6487980 kB Unevictable: 8608 kB Mlocked: 8608 kB SwapTotal: 8388600 kB SwapFree: 8388600 kB Dirty: 11416 kB Writeback: 0 kB AnonPages: 18436224 kB Mapped: 94536 kB Shmem: 6364 kB Slab: 46240380 kB SReclaimable: 44561644 kB SUnreclaim: 1678736 kB KernelStack: 9336 kB PageTables: 457516 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 72364108 kB Committed_AS: 22305444 kB VmallocTotal: 34359738367 kB VmallocUsed: 480164 kB VmallocChunk: 34290830848 kB HardwareCorrupted: 0 kB AnonHugePages: 12216320 kB HugePages_Total: 2048 HugePages_Free: 2048 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 5604 kB DirectMap2M: 2078720 kB DirectMap1G: 132120576 kB Slabtop: slabtop --once Active / Total Objects (% used) : 225920064 / 226193412 (99.9%) Active / Total Slabs (% used) : 11556364 / 11556415 (100.0%) Active / Total Caches (% used) : 110 / 194 (56.7%) Active / Total Size (% used) : 43278793.73K / 43315465.42K (99.9%) Minimum / Average / Maximum Object : 0.02K / 0.19K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 221416340 221416039 3% 0.19K 11070817 20 44283268K dentry 1123443 1122739 99% 0.41K 124827 9 499308K fuse_request 1122320 1122180 99% 0.75K 224464 5 897856K fuse_inode 761539 754272 99% 0.20K 40081 19 160324K vm_area_struct 437858 223259 50% 0.10K 11834 37 47336K buffer_head 353353 347519 98% 0.05K 4589 77 18356K anon_vma_chain 325090 324190 99% 0.06K 5510 59 22040K size-64 146272 145422 99% 0.03K 1306 112 5224K size-32 137625 137614 99% 1.02K 45875 3 183500K nfs_inode_cache 128800 118407 91% 0.04K 1400 92 5600K anon_vma 59101 46853 79% 0.55K 8443 7 33772K radix_tree_node 52620 52009 98% 0.12K 1754 30 7016K size-128 19359 19253 99% 0.14K 717 27 2868K sysfs_dir_cache 10240 7746 75% 0.19K 512 20 2048K filp VFS cache pressure: cat /proc/sys/vm/vfs_cache_pressure 125 Swappiness: cat /proc/sys/vm/swappiness 0 I know that unused memory is wasted memory, so this should not necessarily be a bad thing (especially given that 44 GB are shown as SReclaimable). However, apparently the machine experienced problems nonetheless, and I'm afraid the same will happen again in a few days when Slab surpasses 90 GB. Questions I have these questions: Am I correct in thinking that the Slab memory is always physical RAM, and the number is already subtracted from the MemFree value? Is such a high number of dentry entries normal? The PHP application has access to around 1.5 M files, however most of them are archives and not being accessed at all for regular web traffic. What could be an explanation for the fact that the number of cached inodes is much lower than the number of cached dentries, should they not be related somehow? If the system runs into memory trouble, should the kernel not free some of the dentries automatically? What could be a reason that this does not happen? Is there any way to "look into" the dentry cache to see what all this memory is (i.e. what are the paths that are being cached)? Perhaps this points to some kind of memory leak, symlink loop, or indeed to something the PHP application is doing wrong. The PHP application code as well as all asset files are mounted via GlusterFS network file system, could that have something to do with it? Please keep in mind that I can not investigate as root, only as a regular user, and that the administrator refuses to help. He won't even run the typical echo 2 > /proc/sys/vm/drop_caches test to see if the Slab memory is indeed reclaimable. Any insights into what could be going on and how I can investigate any further would be greatly appreciated. Updates Some further diagnostic information: Mounts: cat /proc/self/mounts rootfs / rootfs rw 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 devtmpfs /dev devtmpfs rw,relatime,size=66063000k,nr_inodes=16515750,mode=755 0 0 devpts /dev/pts devpts rw,relatime,gid=5,mode=620,ptmxmode=000 0 0 tmpfs /dev/shm tmpfs rw,relatime 0 0 /dev/mapper/sysvg-lv_root / ext4 rw,relatime,barrier=1,data=ordered 0 0 /proc/bus/usb /proc/bus/usb usbfs rw,relatime 0 0 /dev/sda1 /boot ext4 rw,relatime,barrier=1,data=ordered 0 0 tmpfs /phptmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 tmpfs /wsdltmp tmpfs rw,noatime,size=1048576k,nr_inodes=15728640,mode=777 0 0 none /proc/sys/fs/binfmt_misc binfmt_misc rw,relatime 0 0 cgroup /cgroup/cpuset cgroup rw,relatime,cpuset 0 0 cgroup /cgroup/cpu cgroup rw,relatime,cpu 0 0 cgroup /cgroup/cpuacct cgroup rw,relatime,cpuacct 0 0 cgroup /cgroup/memory cgroup rw,relatime,memory 0 0 cgroup /cgroup/devices cgroup rw,relatime,devices 0 0 cgroup /cgroup/freezer cgroup rw,relatime,freezer 0 0 cgroup /cgroup/net_cls cgroup rw,relatime,net_cls 0 0 cgroup /cgroup/blkio cgroup rw,relatime,blkio 0 0 /etc/glusterfs/glusterfs-www.vol /var/www fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 /etc/glusterfs/glusterfs-upload.vol /var/upload fuse.glusterfs rw,relatime,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 0 0 sunrpc /var/lib/nfs/rpc_pipefs rpc_pipefs rw,relatime 0 0 172.17.39.78:/www /data/www nfs rw,relatime,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 0 0 Mount info: cat /proc/self/mountinfo 16 21 0:3 / /proc rw,relatime - proc proc rw 17 21 0:0 / /sys rw,relatime - sysfs sysfs rw 18 21 0:5 / /dev rw,relatime - devtmpfs devtmpfs rw,size=66063000k,nr_inodes=16515750,mode=755 19 18 0:11 / /dev/pts rw,relatime - devpts devpts rw,gid=5,mode=620,ptmxmode=000 20 18 0:16 / /dev/shm rw,relatime - tmpfs tmpfs rw 21 1 253:1 / / rw,relatime - ext4 /dev/mapper/sysvg-lv_root rw,barrier=1,data=ordered 22 16 0:15 / /proc/bus/usb rw,relatime - usbfs /proc/bus/usb rw 23 21 8:1 / /boot rw,relatime - ext4 /dev/sda1 rw,barrier=1,data=ordered 24 21 0:17 / /phptmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 25 21 0:18 / /wsdltmp rw,noatime - tmpfs tmpfs rw,size=1048576k,nr_inodes=15728640,mode=777 26 16 0:19 / /proc/sys/fs/binfmt_misc rw,relatime - binfmt_misc none rw 27 21 0:20 / /cgroup/cpuset rw,relatime - cgroup cgroup rw,cpuset 28 21 0:21 / /cgroup/cpu rw,relatime - cgroup cgroup rw,cpu 29 21 0:22 / /cgroup/cpuacct rw,relatime - cgroup cgroup rw,cpuacct 30 21 0:23 / /cgroup/memory rw,relatime - cgroup cgroup rw,memory 31 21 0:24 / /cgroup/devices rw,relatime - cgroup cgroup rw,devices 32 21 0:25 / /cgroup/freezer rw,relatime - cgroup cgroup rw,freezer 33 21 0:26 / /cgroup/net_cls rw,relatime - cgroup cgroup rw,net_cls 34 21 0:27 / /cgroup/blkio rw,relatime - cgroup cgroup rw,blkio 35 21 0:28 / /var/www rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-www.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 36 21 0:29 / /var/upload rw,relatime - fuse.glusterfs /etc/glusterfs/glusterfs-upload.vol rw,user_id=0,group_id=0,default_permissions,allow_other,max_read=131072 37 21 0:30 / /var/lib/nfs/rpc_pipefs rw,relatime - rpc_pipefs sunrpc rw 39 21 0:31 / /data/www rw,relatime - nfs 172.17.39.78:/www rw,vers=3,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,port=38467,timeo=600,retrans=2,sec=sys,mountaddr=172.17.39.78,mountvers=3,mountport=38465,mountproto=tcp,local_lock=none,addr=172.17.39.78 GlusterFS config: cat /etc/glusterfs/glusterfs-www.vol volume remote1 type protocol/client option transport-type tcp option remote-host 172.17.39.71 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote2 type protocol/client option transport-type tcp option remote-host 172.17.39.72 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote3 type protocol/client option transport-type tcp option remote-host 172.17.39.73 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume remote4 type protocol/client option transport-type tcp option remote-host 172.17.39.74 option ping-timeout 10 option transport.socket.nodelay on # undocumented option for speed # http://gluster.org/pipermail/gluster-users/2009-September/003158.html option remote-subvolume /data/www end-volume volume replicate1 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote1 remote2 end-volume volume replicate2 type cluster/replicate option lookup-unhashed off # off will reduce cpu usage, and network option local-volume-name 'hostname' subvolumes remote3 remote4 end-volume volume distribute type cluster/distribute subvolumes replicate1 replicate2 end-volume volume iocache type performance/io-cache option cache-size 8192MB # default is 32MB subvolumes distribute end-volume volume writeback type performance/write-behind option cache-size 1024MB option window-size 1MB subvolumes iocache end-volume ### Add io-threads for parallel requisitions volume iothreads type performance/io-threads option thread-count 64 # default is 16 subvolumes writeback end-volume volume ra type performance/read-ahead option page-size 2MB option page-count 16 option force-atime-update no subvolumes iothreads end-volume

Read the article

Removing a device in "removed" state from Linux software RAID array

- by Sahasranaman MS

My workstation has two disks(/dev/sd[ab]), both with similar partitioning. /dev/sdb failed, and cat /proc/mdstat stopped showing the second sdb partition. I ran mdadm --fail and mdadm --remove for all partitions from the failed disk on the arrays that use them, although all such commands failed with mdadm: set device faulty failed for /dev/sdb2: No such device mdadm: hot remove failed for /dev/sdb2: No such device or address Then I hot swapped the failed disk, partitioned the new disk and added the partitions to the respective arrays. All arrays got rebuilt properly except one, because in /dev/md2, the failed disk doesn't seem to have been removed from the array properly. Because of this, the new partition keeps getting added as a spare to the partition, and its status remains degraded. Here's what mdadm --detail /dev/md2 shows: [root@ldmohanr ~]# mdadm --detail /dev/md2 /dev/md2: Version : 1.1 Creation Time : Tue Dec 27 22:55:14 2011 Raid Level : raid1 Array Size : 52427708 (50.00 GiB 53.69 GB) Used Dev Size : 52427708 (50.00 GiB 53.69 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Fri Nov 23 14:59:56 2012 State : active, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : ldmohanr.net:2 (local to host ldmohanr.net) UUID : 4483f95d:e485207a:b43c9af2:c37c6df1 Events : 5912611 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 0 0 1 removed 2 8 18 - spare /dev/sdb2 To remove a disk, mdadm needs a device filename, which was /dev/sdb2 originally, but that no longer refers to device number 1. I need help with removing device number 1 with 'removed' status and making /dev/sdb2 active.

Read the article

Backup data from RAID 1 disk out of its server

- by Doomsday

I'm facing with a pretty easy problem in my opinion. I've extracted a working disk from a RAID1 and I'm looking to copy only data (FS and RAID configuration doesn't matter) into another location (another FS). My problem is I'm not able to mount properly this disk into another linux. I've first looked the partition table : # fdisk -l /dev/sdc Disk /dev/sdc: 640.1 GB, 640135028736 bytes 255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 1249535699 624767818+ fd Linux raid autodetect /dev/sdc2 1249535700 1250017649 240975 fd Linux raid autodetect /dev/sdc3 1250017650 1250258624 120487+ 82 Linux swap / Solaris I've understood I should use dmraid tools. Once installed : # cat /proc/mdstat Personalities : md0 : inactive sdc1[1](S) 624767744 blocks unused devices: <none> And some other informations : # mdadm --examine /dev/sdc1 /dev/sdc1: Magic : a92b4efc Version : 0.90.00 UUID : 8f292f54:7e5aef72:7e5ab5fd:b348fd05 Creation Time : Mon Jun 2 03:39:41 2008 Raid Level : raid1 Used Dev Size : 624767744 (595.82 GiB 639.76 GB) Array Size : 624767744 (595.82 GiB 639.76 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 0 Update Time : Tue Feb 7 22:34:59 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Checksum : a505b324 - correct Events : 15148 Number Major Minor RaidDevice State this 1 8 1 1 active sync /dev/sda1 0 0 8 17 0 active sync /dev/sdb1 1 1 8 1 1 active sync /dev/sda1 From here, I've tried to mount but I'm not comfortable with dmtools and how it's working. # mount /dev/sdc1 /mnt/sdc1 mount: unknown filesystem type 'linux_raid_member' # mount /dev/md0 /mnt/sdc1 mount: /dev/md0: can't read superblock I've seen some options to alter RAID array with mdadm but I only want to copy data on its filesystem before wiping them... Anyone has a clue ?

Read the article

How to delete removed devices from a mdadm RAID1?

- by Kabuto

I had to replace two hard drives in my RAID1. After adding the two new partitions the old ones are still showing up as removed while the new ones are only added as spare. I've had no luck removing the partitions marked as removed. Here's the RAID in question. Note the two devices (0 and 1) with state removed. $ mdadm --detail /dev/md1 mdadm: metadata format 00.90 unknown, ignored. mdadm: metadata format 00.90 unknown, ignored. /dev/md1: Version : 00.90 Creation Time : Thu May 20 12:32:25 2010 Raid Level : raid1 Array Size : 1454645504 (1387.26 GiB 1489.56 GB) Used Dev Size : 1454645504 (1387.26 GiB 1489.56 GB) Raid Devices : 3 Total Devices : 3 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Tue Nov 12 21:30:39 2013 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : 10d7d9be:a8a50b8e:788182fa:2238f1e4 Events : 0.8717546 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 8 34 2 active sync /dev/sdc2 3 8 18 - spare /dev/sdb2 4 8 2 - spare /dev/sda2 How do I get rid of these devices and add the new partitions as active RAID devices? Update I seem to have gotten rid of them. My RAID is resyncing, but the two drives are still marked as spares and are number 3 and 4, which looks wrong. I'll have to wait for the resync to finish. All I did was to fix the metadata error by editing my mdadm.conf and rebooting. I tried rebooting before, but this time it worked for whatever reason. Number Major Minor RaidDevice State 3 8 2 0 spare rebuilding /dev/sda2 4 8 18 1 spare rebuilding /dev/sdb2 2 8 34 2 active sync /dev/sdc2

Search Results

Search found 8983 results on 360 pages for 'active attr'.

Page 95/360 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102 | Next Page >

- by Qin

- by Jason Morhardt

- by user556167

- by Scarface

- by fwaokda

- by Justin Meltzer

- by wildanjel

- by Alex

- by user1289167

- by Alex Ciminian

- by c4f4t0r

- by Troels Arvin

- by muhammed sameer

- by melocoton

- by Radu

- by JoshODBrown

- by Bond

- by pauska

- by ADquestion

- by Stephen

- by larsks

- by Wolfgang Stengel

- by Sahasranaman MS

- by Doomsday

- by Kabuto

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102 | Next Page >