Search Results

Search found 9231 results on 370 pages for 'core unlock'.

Page 95/370 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Advice on whether to use scripting, run time compile or something else

    - by Gaz83
    I work in the prodution area at my works and I design and create the software to run our automated test equipment. Everytime I get involved with a new machine I end up with a different and (hopefully) better design. Anyway I have come to the point where I feel I need to start standardization all the machines with the same program. I see a problem when it comes to applying updates as at the moment the test procedures are hard coded into the program at each station. I neeed to be able to update the core program without affecting the testing section. The way I see it that this will mean splitting the program into 2 sections. Main UI - This is the core that talks to everything on the machine such as cameras, sensors, printer etc and is a standalone application. Test Procedure - This is the steps that is executeted everytime the machine runs through a test. The main UI will load the test procedure and execute when ever a test is required. My question is what is the best approach to this in terms of having an application load a file and execute the code with in? Take into account that the code in the test procedure will need access to public methods on the UI/core system to communicate to sensors etc. I have heard about MS Roslyn and had a quick look, would this solve my issue?

    Read the article

  • Is my graphics card in use or not?

    - by Lindhe94
    I have a Samsung Series 7 NP730U3E which is running Ubuntu Gnome 13.10. This computer have an Intel Core i5 3337U an AMD Radeon HD 8570M on the inside. Ubuntu 13.10 is said to have driver support for this graphics card, but I am not sure whether or not this is the case. When I check System Settings Details it says "Graphics: Intel® Ivybridge Mobile" and lspci | grep VGA returns VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09). But lshw -c video returns *-display description: Display controller product: Mars [Radeon HD 8730M] vendor: Advanced Micro Devices, Inc. [AMD/ATI] physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list rom configuration: driver=radeon latency=0 resources: irq:47 memory:e0000000-efffffff memory:f7e00000-f7e3ffff ioport:e000(size=256) memory:f7e40000-f7e5ffff *-display description: VGA compatible controller product: 3rd Gen Core processor Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:f7800000-f7bfffff memory:d0000000-dfffffff ioport:f000(size=64) What is the case? Is my graphics card is use, or do my laptop have undiscovered powers yet to yield?

    Read the article

  • Unity.ResolutionFailedException - Resolution of the dependency failed

    - by Anibas
    I have the following code: public static IEngine CreateEngine() { UnityContainer container = Unity.LoadUnityContainer(DefaultStrategiesContainerName); IEnumerable<IStrategy> strategies = container.ResolveAll<IStrategy>(); ITraderProvider provider = container.Resolve<ITraderProvider>(); return new Engine(provider, new List<IStrategy>(strategies)); } and the config: <unity> <typeAliases> <typeAlias alias="singleton" type="Microsoft.Practices.Unity.ContainerControlledLifetimeManager, Microsoft.Practices.Unity" /> <typeAlias alias="weakRef" type="Microsoft.Practices.Unity.ExternallyControlledLifetimeManager, Microsoft.Practices.Unity" /> <typeAlias alias="Strategy" type="ADTrader.Core.Contracts.IStrategy, ADTrader.Core" /> <typeAlias alias="Trader" type="ADTrader.Core.Contracts.ITraderProvider, ADTrader.Core" /> </typeAliases> <containers> <container name="strategies"> <types> <type type="Strategy" mapTo="ADTrader.Strategies.ThreeTurningStrategy, ADTrader.Strategies" name="1" /> <type type="Trader" mapTo="ADTrader.MbTradingProvider.MBTradingProvider, ADTrader.MbTradingProvider" /> </types> </container> </containers></unity> I am getting the following exception: Microsoft.Practices.Unity.ResolutionFailedException: Resolution of the dependency failed, type = "ADTrader.Core.Contracts.ITraderProvider", name = "". Exception message is: The current build operation (build key Build Key[ADTrader.MbTradingProvider.MBTradingProvider, null]) failed: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Strategy type BuildPlanStrategy, index 3) --- Microsoft.Practices.ObjectBuilder2.BuildFailedException: The current build operation (build key Build Key[ADTrader.MbTradingProvider.MBTradingProvider, null]) failed: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. (Strategy type BuildPlanStrategy, index 3) --- System.AccessViolationException: Attempted to read or write protected memory. This is often an indication that other memory is corrupt. at MBTCOMLib.MbtComMgrClass.EnableSplash(Boolean bEnable) at ADTrader.MbTradingProvider.MBTradingProvider..ctor() at BuildUp_ADTrader.MbTradingProvider.MBTradingProvider(IBuilderContext ) at Microsoft.Practices.ObjectBuilder2.DynamicMethodBuildPlan.BuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.BuildPlanStrategy.PreBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) --- End of inner exception stack trace --- at Microsoft.Practices.ObjectBuilder2.StrategyChain.ExecuteBuildUp(IBuilderContext context) at Microsoft.Practices.ObjectBuilder2.Builder.BuildUp(IReadWriteLocator locator, ILifetimeContainer lifetime, IPolicyList policies, IStrategyChain strategies, Object buildKey, Object existing) at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) --- End of inner exception stack trace --- at Microsoft.Practices.Unity.UnityContainer.DoBuildUp(Type t, Object existing, String name) at Microsoft.Practices.Unity.UnityContainer.Resolve(Type t, String name) at Microsoft.Practices.Unity.UnityContainerBase.ResolveT at ADTrader.Engine.EngineFactory.CreateEngine() Any idea?

    Read the article

  • Python soap using soaplib (server) and suds (client)

    - by Celso Axelrud
    This question is related to: http://stackoverflow.com/questions/1751027/python-soap-server-client In the case of soap with python, there are recommendation to use soaplib (http://wiki.github.com/jkp/soaplib) as soap server and suds (https://fedorahosted.org/suds/) as soap client. My target is to create soap services in python that can be consumed by several clients (java, etc). I tried the HelloWorld example from soaplib (http://trac.optio.webfactional.com/wiki/HelloWorld). It works well when the client is also using soaplib. Then, I tried to use suds as client consuming the HelloWorld services and it fail. -Why this is happening? Does soaplib server has problems to consumed by different clients? Here the code for the server: from soaplib.wsgi_soap import SimpleWSGISoapApp from soaplib.service import soapmethod from soaplib.serializers.primitive import String, Integer, Arraycode class HelloWorldService(SimpleWSGISoapApp): @soapmethod(String,Integer,_returns=Array(String)) def say_hello(self,name,times): results = [] for i in range(0,times): results.append('Hello, %s'%name) return results if __name__=='__main__': from cherrypy.wsgiserver import CherryPyWSGIServer #from cherrypy._cpwsgiserver import CherryPyWSGIServer # this example uses CherryPy2.2, use cherrypy.wsgiserver.CherryPyWSGIServer for CherryPy 3.0 server = CherryPyWSGIServer(('localhost',7789),HelloWorldService()) server.start() This is the soaplib client: from soaplib.client import make_service_client from SoapServerTest_1 import HelloWorldService client = make_service_client('http://localhost:7789/',HelloWorldService()) print client.say_hello("Dave",5) Results: >>> ['Hello, Dave', 'Hello, Dave', 'Hello, Dave', 'Hello, Dave', 'Hello, Dave'] This is the suds client: from suds.client import Client url = 'http://localhost:7789/HelloWordService?wsdl' client1 = Client(url) client1.service.say_hello("Dave",5) Results: >>> Unhandled exception while debugging... Traceback (most recent call last): File "C:\Python25\Lib\site-packages\RTEP\Sequencing\SoapClientTest_1.py", line 10, in <module> client1.service.say_hello("Dave",5) File "c:\python25\lib\site-packages\suds\client.py", line 537, in __call__ return client.invoke(args, kwargs) File "c:\python25\lib\site-packages\suds\client.py", line 597, in invoke result = self.send(msg) File "c:\python25\lib\site-packages\suds\client.py", line 626, in send result = self.succeeded(binding, reply.message) File "c:\python25\lib\site-packages\suds\client.py", line 658, in succeeded r, p = binding.get_reply(self.method, reply) File "c:\python25\lib\site-packages\suds\bindings\binding.py", line 158, in get_reply result = unmarshaller.process(nodes[0], resolved) File "c:\python25\lib\site-packages\suds\umx\typed.py", line 66, in process return Core.process(self, content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 48, in process return self.append(content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 63, in append self.append_children(content) File "c:\python25\lib\site-packages\suds\umx\core.py", line 140, in append_children cval = self.append(cont) File "c:\python25\lib\site-packages\suds\umx\core.py", line 61, in append self.start(content) File "c:\python25\lib\site-packages\suds\umx\typed.py", line 77, in start found = self.resolver.find(content.node) File "c:\python25\lib\site-packages\suds\resolver.py", line 341, in find frame = Frame(result, resolved=known, ancestry=ancestry) File "c:\python25\lib\site-packages\suds\resolver.py", line 473, in __init__ resolved = type.resolve() File "c:\python25\lib\site-packages\suds\xsd\sxbasic.py", line 63, in resolve raise TypeNotFound(qref) TypeNotFound: Type not found: '(string, HelloWorldService.HelloWorldService, )'

    Read the article

  • Using Joda DateTime as a Jersey parameter?

    - by HolySamosa
    I'd like to use Joda's DateTime for query parameters in Jersey, but this isn't supported by Jersey out-of-the-box. I'm assuming that implementing an InjectableProvider is the proper way to add DateTime support. Can someone point me to a good implementation of an InjectableProvider for DateTime? Or is there an alternative approach worth recommending? (I'm aware I can convert from Date or String in my code, but this seems like a lesser solution). Thanks. Solution: I modified Gili's answer below to use the @Context injection mechanism in JAX-RS rather than Guice. import com.sun.jersey.core.spi.component.ComponentContext; import com.sun.jersey.spi.inject.Injectable; import com.sun.jersey.spi.inject.PerRequestTypeInjectableProvider; import java.util.List; import javax.ws.rs.QueryParam; import javax.ws.rs.WebApplicationException; import javax.ws.rs.core.Context; import javax.ws.rs.core.Response; import javax.ws.rs.core.Response.Status; import javax.ws.rs.core.UriInfo; import javax.ws.rs.ext.Provider; import org.joda.time.DateTime; /** * Enables DateTime to be used as a QueryParam. * <p/> * @author Gili Tzabari */ @Provider public class DateTimeInjector extends PerRequestTypeInjectableProvider<QueryParam, DateTime> { private final UriInfo uriInfo; /** * Creates a new DateTimeInjector. * <p/> * @param uriInfo an instance of {@link UriInfo} */ public DateTimeInjector( @Context UriInfo uriInfo) { super(DateTime.class); this.uriInfo = uriInfo; } @Override public Injectable<DateTime> getInjectable(final ComponentContext cc, final QueryParam a) { return new Injectable<DateTime>() { @Override public DateTime getValue() { final List<String> values = uriInfo.getQueryParameters().get(a.value()); if( values == null || values.isEmpty()) return null; if (values.size() > 1) { throw new WebApplicationException(Response.status(Status.BAD_REQUEST). entity(a.value() + " may only contain a single value").build()); } return new DateTime(values.get(0)); } }; } }

    Read the article

  • Eclipse Galileo won't start after OS X update to 10.6.3

    - by GC
    Hi All, I have just updated os x to 10.6.3 and no Eclipse won't start the logs show the following error, but I can't figure it out. Can anyone shed any light? !SESSION 2010-03-30 10:06:38.244 ----------------------------------------------- eclipse.buildId=M20090917-0800 java.version=1.6.0_17 java.vendor=Apple Inc. BootLoader constants: OS=macosx, ARCH=x86, WS=cocoa, NL=en_US Framework arguments: -product org.eclipse.epp.package.php.product -keyring /Users/gav/.eclipse_keyring -showlocation Command-line arguments: -os macosx -ws cocoa -arch x86 -product org.eclipse.epp.package.php.product -keyring /Users/gav/.eclipse_keyring -showlocation !ENTRY org.eclipse.ui.workbench 2 0 2010-03-30 10:06:40.139 !MESSAGE A handler conflict occurred. This may disable some commands. !SUBENTRY 1 org.eclipse.ui.workbench 2 0 2010-03-30 10:06:40.139 !MESSAGE Conflict for 'com.aptana.ide.editors.views.actions.actionKeyCommand': HandlerActivation(commandId=com.aptana.ide.editors.views.actions.actionKeyCommand, handler=com.aptana.ide.editors.views.actions.ActionKeyCommandHandler, expression=,sourcePriority=0) HandlerActivation(commandId=com.aptana.ide.editors.views.actions.actionKeyCommand, handler=com.aptana.ide.editors.views.actions.ActionKeyCommandHandler, expression=,sourcePriority=0) !ENTRY org.eclipse.ui 4 0 2010-03-30 10:06:40.964 !MESSAGE Unhandled event loop exception !STACK 0 java.lang.NullPointerException at org.eclipse.swt.graphics.Device.getFontList(Device.java:369) at org.eclipse.jface.resource.FontRegistry.filterData(FontRegistry.java:465) at org.eclipse.jface.resource.FontRegistry.createFont(FontRegistry.java:499) at org.eclipse.jface.resource.FontRegistry.defaultFontRecord(FontRegistry.java:563) at org.eclipse.jface.resource.FontRegistry.defaultFontData(FontRegistry.java:575) at org.eclipse.jface.resource.FontRegistry.getFontData(FontRegistry.java:591) at org.eclipse.ui.internal.themes.ThemeElementHelper.installFont(ThemeElementHelper.java:116) at org.eclipse.ui.internal.themes.ThemeElementHelper.populateRegistry(ThemeElementHelper.java:59) at org.eclipse.ui.internal.Workbench$33.runWithException(Workbench.java:1482) at org.eclipse.ui.internal.StartupThreading$StartupRunnable.run(StartupThreading.java:31) at org.eclipse.swt.widgets.RunnableLock.run(RunnableLock.java:35) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Synchronizer.java:134) at org.eclipse.swt.widgets.Display.runAsyncMessages(Display.java:3405) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3102) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2316) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2221) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:500) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:493) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:194) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:368) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:559) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:514) at org.eclipse.equinox.launcher.Main.run(Main.java:1311) It looks like the update may have upgraded the Java version, possibly :S but I don't know if this can be rolled back even if it did update it. java version "1.6.0_17" Java(TM) SE Runtime Environment (build 1.6.0_17-b04-248-10M3025) Java HotSpot(TM) 64-Bit Server VM (build 14.3-b01-101, mixed mode) Thanks in advance!

    Read the article

  • Magento My Account Layout XML Problem

    - by Remy
    Hi there, I'm having issues getting the customer.xml layout file to work properly for the customer's "my account" pages. The navigation links and the previously ordered items that are usually on the left hand side of the page won't show up on the page, but if I change the reference name to "content" in the xml file, it shows up (except it's obviously then on the right hand side). I've checked the template it's referencing (2columns-left.phtml), and the getChildHtml('left') is there in the correct position. The block that's causing the problem: <customer_account> <!-- Mage_Customer --> <reference name="root"> <action method="setTemplate"><template>page/2columns-left.phtml</template></action> </reference> <reference name="left"> <action method="unsetChild"><name>catalog.navigation.all</name></action> <action method="unsetChild"><name>callout.sendcard</name></action> <action method="unsetChild"><name>callout.specialorder</name></action> <block type="customer/account_navigation" name="customer_account_navigation" before="-" template="customer/account/navigation.phtml"> <action method="addLink" translate="label" module="customer"><name>account</name><path>customer/account/</path><label>Account Dashboard</label></action> <action method="addLink" translate="label" module="customer"><name>account_edit</name><path>customer/account/edit/</path><label>Account Information</label></action> <action method="addLink" translate="label" module="customer"><name>address_book</name><path>customer/address/</path><label>Address Book</label></action> </block> <block type="sales/reorder_sidebar" name="sale.reorder.sidebar" as="reorder" template="sales/reorder/sidebar.phtml"/> <remove name="tags_popular"/> </reference> </customer_account> This was basically copied straight over from another one of our sites where this works 100%. I've tried everything I can think of (changing the name of the reference in both the template and the layout xml, for example) to no avail. The templates that the layout is referencing are obviously working because they do show up when put into the "content" area. This installation of magento is version 1.3.1.1. I appreciate any advice you have to give me... *Update: I tried changing the reference to "global_messages", and it doesn't show there either. It only seems to work in the "content" section.* Update 2: These are the results of using the "showLayout=page" query string on the page when used with Alan Storm's very handy debugging module (which you'll find in his answer below). <?xml version="1.0"?> <layout><block type="page/html" name="root" output="toHtml" template="page/3columns.phtml"> <block type="page/html_head" name="head" as="head"> <action method="addJs"> <script>prototype/prototype.js</script> </action> <action method="addJs"> <script>prototype/validation.js</script> </action> <action method="addJs"> <script>paypoint/validation.js</script> </action> <action method="addJs"> <script>scriptaculous/builder.js</script> </action> <action method="addJs"> <script>scriptaculous/effects.js</script> </action> <action method="addJs"> <script>scriptaculous/dragdrop.js</script> </action> <action method="addJs"> <script>scriptaculous/controls.js</script> </action> <action method="addJs"> <script>scriptaculous/slider.js</script> </action> <action method="addJs"> <script>varien/js.js</script> </action> <action method="addJs"> <script>varien/form.js</script> </action> <action method="addJs"> <script>varien/menu.js</script> </action> <action method="addJs"> <script>mage/translate.js</script> </action> <action method="addJs"> <script>mage/cookies.js</script> </action> <action method="addCss"> <stylesheet>css/reset.css</stylesheet> </action> <action method="addCss"> <stylesheet>css/boxes.css</stylesheet> </action> <action method="addCss"> <stylesheet>css/clears.css</stylesheet> </action> <action method="addCss"> <stylesheet>css/menu.css</stylesheet> </action> <action method="addCss"> <stylesheet>css/calendar-blue.css</stylesheet> </action> <action method="addCss"> <stylesheet>css/styles.css</stylesheet> </action> <action method="addItem"> <type>skin_css</type> <name>css/iestyles.css</name> <params/> <if>IE</if> </action> <action method="addItem"> <type>skin_css</type> <name>css/ie7.css</name> <params/> <if>IE 7</if> </action> <action method="addItem"> <type>skin_css</type> <name>css/ie7minus.css</name> <params/> <if>lt IE 7</if> </action> <action method="addItem"> <type>js</type> <name>lib/ds-sleight.js</name> <params/> <if>lt IE 7</if> </action> <action method="addItem"> <type>js</type> <name>varien/iehover-fix.js</name> <params/> <if>lt IE 7</if> </action> <action method="addCss"> <stylesheet>css/print.css</stylesheet> <params>media="print"</params> </action> </block> <block type="page/html_header" name="header" as="header"> <block type="page/template_links" name="top.links" as="topLinks"/> <block type="page/switch" name="store_language" as="store_language" template="page/switch/languages.phtml"/> <block type="core/template" name="top.nav" template="page/html/top.nav.phtml"/> </block> <block type="core/messages" name="global_messages" as="global_messages"/> <block type="core/messages" name="messages" as="messages"/> <block type="core/text_list" name="content" as="content"/> <block type="core/text_list" name="right" as="right"/> <block type="page/html_footer" name="footer" as="footer" template="page/html/footer.phtml"/> <block type="core/text_list" name="before_body_end" as="before_body_end"/> </block> <block type="core/profiler" output="toHtml"/> <reference name="top.links"> <action method="addLink" translate="label title" module="customer"> <label>My Account</label> <url helper="customer/getAccountUrl"/> <title>My Account</title> <prepare/> <urlParams/> <position>10</position> </action> </reference> <reference name="root"> <action method="setTemplate"> <template>page/2columns-left.phtml</template> </action> </reference> <reference name="top.menu"> <block type="catalog/navigation" name="catalog.topnav" template="catalog/navigation/top.phtml"/> </reference> <reference name="footer_links"> <action method="addLink" translate="label title" module="catalog" ifconfig="catalog/seo/site_map"> <label>Site Map</label> <url helper="catalog/map/getCategoryUrl"/> <title>Site Map</title> </action> </reference> <reference name="footer_links"> <action method="addLink" translate="label title" module="catalogsearch" ifconfig="catalog/seo/search_terms"> <label>Search Terms</label> <url helper="catalogsearch/getSearchTermUrl"/> <title>Search Terms</title> </action> <action method="addLink" translate="label title" module="catalogsearch"> <label>Advanced Search</label> <url helper="catalogsearch/getAdvancedSearchUrl"/> <title>Advanced Search</title> </action> </reference> <reference name="top.links"> <block type="checkout/links" name="checkout_cart_link"> <action method="addCartLink"/> <action method="addCheckoutLink"/> </block> </reference> <reference name="footer"> <block type="cms/block" name="cms_footer_links" before="footer_links"> <action method="setBlockId"> <block_id>footer_links</block_id> </action> </block> </reference> <reference name="left"> <block type="tag/popular" name="tags_popular" template="tag/popular.phtm" ignore="1"> <action method="setTemplate"> <template>tag/popular.phtml</template> </action> </block> </reference> <reference name="left"> </reference> <reference name="before_body_end"> <block type="googleanalytics/ga" name="google_analytics" as="google_analytics"/> </reference> <reference name="footer_links"> <action method="addLink" translate="label title" module="contacts" ifconfig="contacts/contacts/enabled"> <label>Contact Us</label> <url>contact-us</url> <title>Contact Us</title> <prepare>true</prepare> </action> </reference> <reference name="footer_links"> <action method="addLink" translate="label title" module="rss" ifconfig="rss/config/active"> <label>RSS</label> <url>rss</url> <title>RSS testing</title> <prepare>true</prepare> <urlParams/> <position/> <li/> <a>class="link-feed"</a> </action> </reference> <reference name="wishlist_sidebar"> <action method="addPriceBlockType"> <type>bundle</type> <block>bundle/catalog_product_price</block> <template>bundle/catalog/product/price.phtml</template> </action> </reference> <reference name="cart_sidebar"> <action method="addItemRender"> <type>bundle</type> <block>bundle/checkout_cart_item_renderer</block> <template>checkout/cart/sidebar/default.phtml</template> </action> </reference> <reference name="root"> <action method="setTemplate"> <template>page/2columns-left.phtml</template> </action> </reference> <reference name="left"> <action method="unsetChild"> <name>catalog.navigation.all</name> </action> <action method="unsetChild"> <name>callout.sendcard</name> </action> <action method="unsetChild"> <name>callout.specialorder</name> </action> <block type="customer/account_navigation" name="customer_account_navigation" before="-" template="customer/account/navigation.phtml"> <action method="addLink" translate="label" module="customer"> <name>account</name> <path>customer/account/</path> <label>Account Dashboard</label> </action> <action method="addLink" translate="label" module="customer"> <name>account_edit</name> <path>customer/account/edit/</path> <label>Account Information</label> </action> <action method="addLink" translate="label" module="customer"> <name>address_book</name> <path>customer/address/</path> <label>Address Book</label> </action> </block> <block type="sales/reorder_sidebar" name="sale.reorder.sidebar" as="reorder" template="sales/reorder/sidebar.phtml"/> <remove name="tags_popular"/> </reference> <reference name="customer_account_navigation"> <action method="addLink" translate="label" module="sales"> <name>orders</name> <path>sales/order/history/</path> <label>My Orders</label> </action> </reference> <reference name="customer_account_navigation"> <action method="addLink" translate="label" module="tag"> <name>tags</name> <path>tag/customer/</path> <label>My Tags</label> </action> </reference> <reference name="customer_account_navigation"> <action method="addLink" translate="label" module="newsletter"> <name>newsletter</name> <path>newsletter/manage/</path> <label>Newsletter Subscriptions</label> </action> </reference> <reference name="cart_sidebar"> <action method="addItemRender"> <type>bundle</type> <block>bundle/checkout_cart_item_renderer</block> <template>checkout/cart/sidebar/default.phtml</template> </action> </reference> <update handle="customer_account"/> <reference name="content"> <block type="customer/account_dashboard" name="customer_account_dashboard" template="customer/account/dashboard.phtml"> <block type="customer/account_dashboard_hello" name="customer_account_dashboard_hello" as="hello" template="customer/account/dashboard/hello.phtml"/> <block type="core/template" name="customer_account_dashboard_top" as="top"/> <block type="customer/account_dashboard_info" name="customer_account_dashboard_info" as="info" template="customer/account/dashboard/info.phtml"/> <block type="customer/account_dashboard_newsletter" name="customer_account_dashboard_newsletter" as="newsletter" template="customer/account/dashboard/newsletter.phtml"/> <block type="customer/account_dashboard_address" name="customer_account_dashboard_address" as="address" template="customer/account/dashboard/address.phtml"/> <block type="core/template" name="customer_account_dashboard_info1" as="info1"/> <block type="core/template" name="customer_account_dashboard_info2" as="info2"/> </block> </reference> <reference name="right"> <action method="unsetChild"> <name>catalog_compare_sidebar</name> </action> </reference> <reference name="customer_account_dashboard"> <action method="unsetChild"> <name>top</name> </action> <block type="sales/order_recent" name="customer_account_dashboard_top" as="top" template="sales/order/recent.phtml"/> </reference> <reference name="right"> <action method="unsetChild"> <name>right.poll</name> </action> </reference> <reference name="customer_account_dashboard"> <action method="unsetChild"> <name>customer_account_dashboard_info2</name> </action> <block type="tag/customer_recent" name="customer_account_dashboard_info2" as="info2" template="tag/customer/recent.phtml"/> </reference> <reference name="right"> <action method="unsetChild"> <name>right.newsletter</name> </action> </reference> <reference name="top.links"> <action method="addLink" translate="label title" module="customer"> <label>Log Out</label> <url helper="customer/getLogoutUrl"/> <title>Log Out</title> <prepare/> <urlParams/> <position>100</position> </action> </reference></layout>

    Read the article

  • Java web-app debugging not possible due to direct undeploy on debug

    - by Hendrik
    When i try to debug my webapp it starts up the tomcat server and the application, but shuts down the debugger shortly before the app gets usable. I see the debugging toolbar for a second before it vanishes again, though the app keeps running. Tomcat-log: Listening for transport dt_socket at address: 11555 23.03.2010 01:24:35 org.apache.catalina.core.AprLifecycleListener init INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: .:/Library/Java/Extensions:/System/Library/Java/Extensions:/usr/lib/java 23.03.2010 01:24:35 org.apache.coyote.http11.Http11Protocol init INFO: Initializing Coyote HTTP/1.1 on http-8084 23.03.2010 01:24:35 org.apache.catalina.startup.Catalina load INFO: Initialization processed in 847 ms 23.03.2010 01:24:35 org.apache.catalina.core.StandardService start INFO: Starting service Catalina 23.03.2010 01:24:35 org.apache.catalina.core.StandardEngine start INFO: Starting Servlet Engine: Apache Tomcat/6.0.20 log4j:WARN No appenders could be found for logger (org.springframework.web.context.ContextLoader). log4j:WARN Please initialize the log4j system properly. 23.03.2010 01:24:41 org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on http-8084 23.03.2010 01:24:41 org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 23.03.2010 01:24:41 org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/78 config=null 23.03.2010 01:24:41 org.apache.catalina.startup.Catalina start INFO: Server startup in 5855 ms 23.03.2010 01:24:42 org.apache.catalina.startup.HostConfig checkResources INFO: Undeploying context [] 23.03.2010 01:24:45 org.apache.catalina.core.StandardContext start INFO: Container org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/] has already been started Debugging log: Attached JPDA debugger to localhost:11555 Checking data source definitions for missing JDBC drivers... Deploying JDBC driver to /Applications/NetBeans/apache-tomcat-6.0.20/lib/mysql-connector-java-5.1.6-bin.jar Stopping Tomcat process... Waiting for Tomcat... Tomcat server stopped. Starting Tomcat process... Waiting for Tomcat... Tomcat server started. Undeploying ... OK - Undeployed application at context path / In-place deployment at /path/to/project/dir/build/web deploy?config=file%3A%2Fvar%2Ffolders%2FZP%2FZPbqxGrbHFaUlXzAfgWV1%2B%2B%2B%2BTQ%2F-Tmp-%2Fcontext734173871283203218.xml&path=/ OK - Deployed application at context path / start?path=/ Start is in progress... OK - Started application at context path / debug-display-browser: Browsing: http://localhost:8084/ connect-client-debugger: BUILD SUCCESSFUL (total time: 18 seconds) System is Netbeans 6.8 on MacOS 10.6.2. Thank you very much, guys!

    Read the article

  • Unable to execute a function using reflection

    - by Steven
    hi, i am developing a eclipse plugin . In this plugin i am using reflection to execute a function in a class present in another project which is a hibernate project.Whenever the invoke is used i.e mymethod.invoke(myobj); it is giving this exception java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:599) at packagesearch.DummyExecution.execution(DummyExecution.java:154) at packagesearch.HelloWorldAction.run(HelloWorldAction.java:48) at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251) at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229) at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:583) at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500) at org.eclipse.jface.action.ActionContributionItem$6.handleEvent(ActionContributionItem.java:452) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:599) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504) at org.eclipse.equinox.launcher.Main.run(Main.java:1236) at org.eclipse.equinox.launcher.Main.main(Main.java:1212) Caused by: java.lang.NoClassDefFoundError: org.dom4j.DocumentException at java.lang.J9VMInternals.verifyImpl(Native Method) at java.lang.J9VMInternals.verify(J9VMInternals.java:72) at java.lang.J9VMInternals.initialize(J9VMInternals.java:134) at test.Example.demo1(Example.java:38) ... 36 more Caused by: java.lang.ClassNotFoundException: org.dom4j.DocumentException at java.net.URLClassLoader.findClass(URLClassLoader.java:419) at java.lang.ClassLoader.loadClass(ClassLoader.java:643) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:345) at java.lang.ClassLoader.loadClass(ClassLoader.java:609) ... 40 more what is the exact problem . i have used loader to load the class.Help

    Read the article

  • Unable to execute a function usnig reflection

    - by Steven
    hi, i am developing a eclipse plugin . In this plugin i am using reflection to execute a function in a class present in another project which is a hibernate project.Whenever the invoke is used i.e mymethod.invoke(myobj); it is giving this exception java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:599) at packagesearch.DummyExecution.execution(DummyExecution.java:154) at packagesearch.HelloWorldAction.run(HelloWorldAction.java:48) at org.eclipse.ui.internal.PluginAction.runWithEvent(PluginAction.java:251) at org.eclipse.ui.internal.WWinPluginAction.runWithEvent(WWinPluginAction.java:229) at org.eclipse.jface.action.ActionContributionItem.handleWidgetSelection(ActionContributionItem.java:583) at org.eclipse.jface.action.ActionContributionItem.access$2(ActionContributionItem.java:500) at org.eclipse.jface.action.ActionContributionItem$6.handleEvent(ActionContributionItem.java:452) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1003) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3823) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3422) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2384) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2348) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2200) at org.eclipse.ui.internal.Workbench$5.run(Workbench.java:495) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:288) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:490) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:113) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:193) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:386) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37) at java.lang.reflect.Method.invoke(Method.java:599) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:549) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:504) at org.eclipse.equinox.launcher.Main.run(Main.java:1236) at org.eclipse.equinox.launcher.Main.main(Main.java:1212) Caused by: java.lang.NoClassDefFoundError: org.dom4j.DocumentException at java.lang.J9VMInternals.verifyImpl(Native Method) at java.lang.J9VMInternals.verify(J9VMInternals.java:72) at java.lang.J9VMInternals.initialize(J9VMInternals.java:134) at test.Example.demo1(Example.java:38) ... 36 more Caused by: java.lang.ClassNotFoundException: org.dom4j.DocumentException at java.net.URLClassLoader.findClass(URLClassLoader.java:419) at java.lang.ClassLoader.loadClass(ClassLoader.java:643) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:345) at java.lang.ClassLoader.loadClass(ClassLoader.java:609) ... 40 more what is the exact problem . i have used loader to load the class.Help

    Read the article

  • Utility that helps in file locking - expert tips wanted

    - by maix
    I've written a subclass of file that a) provides methods to conveniently lock it (using fcntl, so it only supports unix, which is however OK for me atm) and b) when reading or writing asserts that the file is appropriately locked. Now I'm not an expert at such stuff (I've just read one paper [de] about it) and would appreciate some feedback: Is it secure, are there race conditions, are there other things that could be done better … Here is the code: from fcntl import flock, LOCK_EX, LOCK_SH, LOCK_UN, LOCK_NB class LockedFile(file): """ A wrapper around `file` providing locking. Requires a shared lock to read and a exclusive lock to write. Main differences: * Additional methods: lock_ex, lock_sh, unlock * Refuse to read when not locked, refuse to write when not locked exclusivly. * mode cannot be `w` since then the file would be truncated before it could be locked. You have to lock the file yourself, it won't be done for you implicitly. Only you know what lock you need. Example usage:: def get_config(): f = LockedFile(CONFIG_FILENAME, 'r') f.lock_sh() config = parse_ini(f.read()) f.close() def set_config(key, value): f = LockedFile(CONFIG_FILENAME, 'r+') f.lock_ex() config = parse_ini(f.read()) config[key] = value f.truncate() f.write(make_ini(config)) f.close() """ def __init__(self, name, mode='r', *args, **kwargs): if 'w' in mode: raise ValueError('Cannot open file in `w` mode') super(LockedFile, self).__init__(name, mode, *args, **kwargs) self.locked = None def lock_sh(self, **kwargs): """ Acquire a shared lock on the file. If the file is already locked exclusively, do nothing. :returns: Lock status from before the call (one of 'sh', 'ex', None). :param nonblocking: Don't wait for the lock to be available. """ if self.locked == 'ex': return # would implicitly remove the exclusive lock return self._lock(LOCK_SH, **kwargs) def lock_ex(self, **kwargs): """ Acquire an exclusive lock on the file. :returns: Lock status from before the call (one of 'sh', 'ex', None). :param nonblocking: Don't wait for the lock to be available. """ return self._lock(LOCK_EX, **kwargs) def unlock(self): """ Release all locks on the file. Flushes if there was an exclusive lock. :returns: Lock status from before the call (one of 'sh', 'ex', None). """ if self.locked == 'ex': self.flush() return self._lock(LOCK_UN) def _lock(self, mode, nonblocking=False): flock(self, mode | bool(nonblocking) * LOCK_NB) before = self.locked self.locked = {LOCK_SH: 'sh', LOCK_EX: 'ex', LOCK_UN: None}[mode] return before def _assert_read_lock(self): assert self.locked, "File is not locked" def _assert_write_lock(self): assert self.locked == 'ex', "File is not locked exclusively" def read(self, *args): self._assert_read_lock() return super(LockedFile, self).read(*args) def readline(self, *args): self._assert_read_lock() return super(LockedFile, self).readline(*args) def readlines(self, *args): self._assert_read_lock() return super(LockedFile, self).readlines(*args) def xreadlines(self, *args): self._assert_read_lock() return super(LockedFile, self).xreadlines(*args) def __iter__(self): self._assert_read_lock() return super(LockedFile, self).__iter__() def next(self): self._assert_read_lock() return super(LockedFile, self).next() def write(self, *args): self._assert_write_lock() return super(LockedFile, self).write(*args) def writelines(self, *args): self._assert_write_lock() return super(LockedFile, self).writelines(*args) def flush(self): self._assert_write_lock() return super(LockedFile, self).flush() def truncate(self, *args): self._assert_write_lock() return super(LockedFile, self).truncate(*args) def close(self): self.unlock() return super(LockedFile, self).close() (the example in the docstring is also my current use case for this) Thanks for having read until down here, and possibly even answering :)

    Read the article

  • Do condition variables still need a mutex if you're changing the checked value atomically?

    - by Joseph Garvin
    Here is the typical way to use a condition variable: // The reader(s) lock(some_mutex); if(protected_by_mutex_var != desired_value) some_condition.wait(some_mutex); unlock(some_mutex); // The writer lock(some_mutex); protected_by_mutex_var = desired_value; unlock(some_mutex); some_condition.notify_all(); But if protected_by_mutex_var is set atomically by say, a compare-and-swap instruction, does the mutex serve any purpose (other than that pthreads and other APIs require you to pass in a mutex)? Is it protecting state used to implement the condition? If not, is it safe then to do this?: // The writer protected_by_mutex_var = desired_value; some_condition.notify_all(); With the writer never directly interacting with the reader's mutex? If so, is it even necessary that different readers use the same mutex?

    Read the article

  • Is it too early to start designing for Task Parallel Library?

    - by Joe Erickson
    I have been following the development of the .NET Task Parallel Library (TPL) with great interest since Microsoft first announced it. There is no doubt in my mind that we will eventually take advantage of TPL. What I am questioning is whether it makes sense to start taking advantage of TPL when Visual Studio 2010 and .NET 4.0 are released, or whether it makes sense to wait a while longer. Why Start Now? The .NET 4.0 Task Parallel Library appears to be well designed and some relatively simple tests demonstrate that it works well on today's multi-core CPUs. I have been very interested in the potential advantages of using multiple lightweight threads to speed up our software since buying my first quad processor Dell Poweredge 6400 about seven years ago. Experiments at that time indicated that it was not worth the effort, which I attributed largely to the overhead of moving data between each CPU's cache (there was no shared cache back then) and RAM. Competitive advantage - some of our customers can never get enough performance and there is no doubt that we can build a faster product using TPL today. It sounds fun. Yes, I realize that some developers would rather poke themselves in the eye with a sharp stick, but we really enjoy maximizing performance. Why Wait? Are today's Intel Nehalem CPUs representative of where we are going as multi-core support matures? You can purchase a Nehalem CPU with 4 cores which share a single level 3 cache today, and most likely a 6 core CPU sharing a single level 3 cache by the time Visual Studio 2010 / .NET 4.0 are released. Obviously, the number of cores will go up over time, but what about the architecture? As the number of cores goes up, will they still share a cache? One issue with Nehalem is the fact that, even though there is a very fast interconnect between the cores, they have non-uniform memory access (NUMA) which can lead to lower performance and less predictable results. Will future multi-core architectures be able to do away with NUMA? Similarly, will the .NET Task Parallel Library change as it matures, requiring modifications to code to fully take advantage of it? Limitations Our core engine is 100% C# and has to run without full trust, so we are limited to using .NET APIs.

    Read the article

  • Ubuntu missing from the Grub menu

    - by varevarao
    Recently I've had some audio issues with Ubuntu (using precise), and in the process of trying to resolve that I ran a dist-upgrade. Everything went just fine, and the sound seemed good, until I rebooted my machine for the first time since the dist-upgrade. All I see now in the Grub menu at startup is memtest86+, another memtest variant, and Windows 7. It's not showing any of the linux kernels that Ubuntu is running on. I am attaching my bootinfoscript: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Dell Utility: FAT16 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: sda4: __________________________________________________________________________ File system: Extended Partition Boot sector type: Unknown Boot sector info: sda5: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 2048. Operating System: Boot files: sda6: __________________________________________________________________________ File system: ext4 Boot sector type: Grub2 (v1.99-2.00) Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda6 and looks at sector 220046240 of the same hard drive for core.img. core.img is at this location and looks for (,msdos6)/boot/grub on this drive. Operating System: Ubuntu 12.04.1 LTS Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sda7: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 63 273,104 273,042 de Dell Utility /dev/sda2 * 274,432 19,406,847 19,132,416 7 NTFS / exFAT / HPFS /dev/sda3 19,406,848 218,274,364 198,867,517 7 NTFS / exFAT / HPFS /dev/sda4 218,275,838 625,139,711 406,863,874 f W95 Extended (LBA) /dev/sda5 328,630,272 625,139,711 296,509,440 7 NTFS / exFAT / HPFS /dev/sda6 218,275,840 324,030,463 105,754,624 83 Linux /dev/sda7 324,032,512 328,626,175 4,593,664 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 07DA-0512 vfat DellUtility /dev/sda2 8834146034145392 ntfs RECOVERY /dev/sda3 48E2189DE21890F4 ntfs OS /dev/sda5 BC2A44C02A447982 ntfs Varshneya /dev/sda6 34731459-4b0f-46ac-a9bf-cb360a2c947c ext4 /dev/sda7 dcb9ce9b-799a-4c65-b008-887b01775670 swap /dev/sr0 iso9660 Ubuntu 12.04.1 LTS i386 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sda6 /mnt ext4 (rw) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda6/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c if loadfont /boot/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(hd0,msdos6)' search --no-floppy --fs-uuid --set=root 34731459-4b0f-46ac-a9bf-cb360a2c947c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" --class windows --class os { insmod part_msdos insmod ntfs set root='(hd0,msdos2)' search --no-floppy --fs-uuid --set=root 8834146034145392 chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda6/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda6 during installation UUID=34731459-4b0f-46ac-a9bf-cb360a2c947c / ext4 errors=remount-ro,user_xattr 0 1 # swap was on /dev/sda7 during installation UUID=dcb9ce9b-799a-4c65-b008-887b01775670 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda6: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 104.851909637 = 112.583880704 boot/grub/core.img 1 121.191410065 = 130.128285696 boot/grub/grub.cfg 1 ======================== Unknown MBRs/Boot Sectors/etc: ======================== Unknown BootLoader on sda4 00000000 eb 0f 2a 5d f4 b7 75 f2 e9 56 12 b8 50 b4 79 ec |..*]..u..V..P.y.| 00000010 89 91 ca c3 16 40 31 d0 ae c4 53 3d c7 dd d7 98 |[email protected]=....| 00000020 bd a4 f2 a4 e8 ab fc ea 36 30 1b 34 cf 8a 28 30 |........60.4..(0| 00000030 43 95 6c 31 3e 76 93 58 84 37 99 c3 ae 3a 88 a3 |C.l1>v.X.7...:..| 00000040 c2 a6 36 2a f8 e0 e1 03 91 8d a1 50 cd ad b0 b5 |..6*.......P....| 00000050 ad 69 3a 49 63 1f 4a 33 97 6e 0c 71 bf 7d bd 35 |.i:Ic.J3.n.q.}.5| 00000060 86 c5 17 93 b4 9f e5 af e0 c4 6f f4 6f f9 4b dd |..........o.o.K.| 00000070 14 39 e2 9e b9 36 ca b1 56 5b d9 b1 66 2c 05 b2 |.9...6..V[..f,..| 00000080 5d 5b 99 c0 db e6 81 27 ab c2 e1 55 00 ac 0b 2c |][.....'...U...,| 00000090 24 d3 8e 54 b0 3d ab 58 e4 23 fc 3a 79 93 fb 5e |$..T.=.X.#.:y..^| 000000a0 94 5a 3a c2 16 4e 56 cb 1b 7f 7e b3 4c 38 ca 5b |.Z:..NV...~.L8.[| 000000b0 ca ab c1 2c 2a 64 e7 77 fe 2a ba ee 08 33 b5 9b |...,*d.w.*...3..| 000000c0 d0 c2 b4 a8 fc 73 4f 01 fd 03 61 75 eb 6d 1a 74 |.....sO...au.m.t| 000000d0 5f 79 31 7f ed e6 f5 99 21 36 16 ed 25 d9 6d 2b |_y1.....!6..%.m+| 000000e0 5f f4 42 b8 9d 01 89 10 fe df a4 98 e7 ab ab ea |_.B.............| 000000f0 1d 1c 44 e1 49 d9 19 c9 ab f5 41 eb 4a 32 c2 39 |..D.I.....A.J2.9| 00000100 87 57 f6 f6 f3 b5 4d 17 72 f2 b1 16 19 aa ec 24 |.W....M.r......$| 00000110 39 bd e3 b1 68 b3 b0 7f fa 2a 3a 2e 99 ed db 8a |9...h....*:.....| 00000120 f8 61 b4 ef 9d 7d 85 95 ed ad eb 9e 71 f4 27 d3 |.a...}......q.'.| 00000130 f3 04 8b 8a 69 98 02 72 df e1 f9 83 27 5b 01 4c |....i..r....'[.L| 00000140 d4 9a b9 3b db ca 1e 40 35 db 6f c1 52 c0 7f 27 |...;[email protected]..'| 00000150 8a 1d bc 34 89 24 b6 e3 fd ec a1 2a e5 9e d1 8f |...4.$.....*....| 00000160 77 e0 d5 52 c0 4c c4 38 38 3c 28 19 bf 20 f0 03 |w..R.L.88<(.. ..| 00000170 38 a4 b1 b5 ed 6a b8 f7 a9 7b 65 b1 7b 64 4a 33 |8....j...{e.{dJ3| 00000180 66 1a 60 29 38 1d 5b 52 40 31 de a5 0c 0f cc 6f |f.`)8.[[email protected]| 00000190 dd 31 6d 3d f0 2a 32 85 67 66 ca 4f 02 aa 0d 30 |.1m=.*2.gf.O...0| 000001a0 66 c9 b2 33 c2 4b 8a fa 3c 7b 52 02 00 88 8e cf |f..3.K..<{R.....| 000001b0 67 1e d4 20 49 1d 1a b8 71 ad c2 d4 37 9d 00 fe |g.. I...q...7...| 000001c0 ff ff 07 fe ff ff 02 e0 93 06 00 60 ac 11 00 fe |...........`....| 000001d0 ff ff 05 fe ff ff 01 00 00 00 01 b0 4d 06 00 00 |............M...| 000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................| 000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.| 00000200 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-11-24__09h45 =================== boot-repair version : 3.195~ppa2~precise boot-sav version : 3.195~ppa2~precise glade2script version : 3.2.2~ppa45~precise boot-sav-extra version : 3.195~ppa2~precise boot-repair is executed in live-session (Ubuntu 12.04.1 LTS, precise, Ubuntu, i686) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- =================== os-prober: /dev/sda2:Windows 7 (loader):Windows:chain /dev/sda6:Ubuntu 12.04.1 LTS (12.04):Ubuntu:linux =================== blkid: /dev/sda1: SEC_TYPE="msdos" LABEL="DellUtility" UUID="07DA-0512" TYPE="vfat" /dev/sda2: LABEL="RECOVERY" UUID="8834146034145392" TYPE="ntfs" /dev/sda3: LABEL="OS" UUID="48E2189DE21890F4" TYPE="ntfs" /dev/sda5: LABEL="Varshneya" UUID="BC2A44C02A447982" TYPE="ntfs" /dev/loop0: TYPE="squashfs" /dev/sda6: UUID="34731459-4b0f-46ac-a9bf-cb360a2c947c" TYPE="ext4" /dev/sda7: UUID="dcb9ce9b-799a-4c65-b008-887b01775670" TYPE="swap" /dev/sr0: LABEL="Ubuntu 12.04.1 LTS i386" TYPE="iso9660" 1 disks with OS, 2 OS : 1 Linux, 0 MacOS, 1 Windows, 0 unknown type OS. Windows not detected by os-prober on sda3. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== /mnt/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== /mnt/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Nov 22 16:15 grub.d total 56 -rwxr-xr-x 1 root root 6743 Sep 12 20:19 00_header -rwxr-xr-x 1 root root 5522 Sep 12 20:05 05_debian_theme -rwxr-xr-x 1 root root 7407 Sep 12 20:19 10_linux -rwxr-xr-x 1 root root 6335 Sep 12 20:19 20_linux_xen -rwxr-xr-x 1 root root 1588 Sep 24 2010 20_memtest86+ -rwxr-xr-x 1 root root 7603 Sep 12 20:19 30_os-prober -rwxr-xr-x 1 root root 214 Sep 12 20:19 40_custom -rwxr-xr-x 1 root root 95 Sep 12 20:19 41_custom -rw-r--r-- 1 root root 483 Sep 12 20:19 README =================== No kernel in /mnt/boot: grub memtest86+.bin memtest86+_multiboot.bin =================== UEFI/Legacy mode: This live-session is not EFI-compatible. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda1. sda2 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, bootmgr, is-winboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, not-far, /mnt/boot-sav/sda2. sda3 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, is-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda3. sda5 : sda, not-sepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, not--efi--part, part-has-no-fstab, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, nopakmgr, nogrubinstall, no---usr, part-has-no-fstab, not-sep-usr, standard, farbios, /mnt/boot-sav/sda5. sda6 : sda, not-sepboot, grubenv-ok grub2, grub-pc, update-grub, 64, no-kernel, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 63 sectors * 512 bytes =================== parted -l: Model: ATA ST9320423AS (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 140MB 140MB primary fat16 diag 2 141MB 9936MB 9796MB primary ntfs boot 3 9936MB 112GB 102GB primary ntfs 4 112GB 320GB 208GB extended lba 6 112GB 166GB 54.1GB logical ext4 7 166GB 168GB 2352MB logical linux-swap(v1) 5 168GB 320GB 152GB logical ntfs Model: HL-DT-ST DVD+-RW GA31N (scsi) Disk /dev/sr0: 4700MB Sector size (logical/physical): 2048B/2048B Partition Table: msdos Number Start End Size Type File system Flags 1 131kB 2916MB 2916MB primary boot, hidden =================== parted -lm: BYT; /dev/sda:320GB:scsi:512:512:msdos:ATA ST9320423AS; 1:32.3kB:140MB:140MB:fat16::diag; 2:141MB:9936MB:9796MB:ntfs::boot; 3:9936MB:112GB:102GB:ntfs::; 4:112GB:320GB:208GB:::lba; 6:112GB:166GB:54.1GB:ext4::; 7:166GB:168GB:2352MB:linux-swap(v1)::; 5:168GB:320GB:152GB:ntfs::; BYT; /dev/sr0:4700MB:scsi:2048:2048:msdos:HL-DT-ST DVD+-RW GA31N; 1:131kB:2916MB:2916MB:::boot, hidden; =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu) /dev/sda6 on /mnt type ext4 (rw) /dev on /mnt/dev type none (rw,bind) /proc on /mnt/proc type none (rw,bind) /sys on /mnt/sys type none (rw,bind) /usr on /mnt/usr type none (rw,bind) /dev/sda1 on /mnt/boot-sav/sda1 type vfat (rw) /dev/sda2 on /mnt/boot-sav/sda2 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /dev/sda5 on /mnt/boot-sav/sda5 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 sda7 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): autofs block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sda7 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 1.9G 113M 1.8G 6% / udev devtmpfs 1.9G 12K 1.9G 1% /dev tmpfs tmpfs 777M 872K 776M 1% /run /dev/sr0 iso9660 696M 696M 0 100% /cdrom /dev/loop0 squashfs 667M 667M 0 100% /rofs tmpfs tmpfs 1.9G 20K 1.9G 1% /tmp none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 1.9G 176K 1.9G 1% /run/shm /dev/sda6 ext4 51G 27G 22G 56% /mnt /dev/sda1 vfat 134M 9.1M 125M 7% /mnt/boot-sav/sda1 /dev/sda2 fuseblk 9.2G 5.6G 3.6G 61% /mnt/boot-sav/sda2 /dev/sda3 fuseblk 95G 80G 16G 84% /mnt/boot-sav/sda3 /dev/sda5 fuseblk 142G 130G 12G 92% /mnt/boot-sav/sda5 =================== fdisk -l: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb8000000 Device Boot Start End Blocks Id System /dev/sda1 63 273104 136521 de Dell Utility /dev/sda2 * 274432 19406847 9566208 7 HPFS/NTFS/exFAT /dev/sda3 19406848 218274364 99433758+ 7 HPFS/NTFS/exFAT /dev/sda4 218275838 625139711 203431937 f W95 Ext'd (LBA) /dev/sda5 328630272 625139711 148254720 7 HPFS/NTFS/exFAT /dev/sda6 218275840 324030463 52877312 83 Linux /dev/sda7 324032512 328626175 2296832 82 Linux swap / Solaris Partition table entries are not in disk order =================== Repair blockers 64bits detected. Please use this software in a 64bits session. (Please use Ubuntu-Secure-Remix-64bits (www.sourceforge.net/p/ubuntu-secured) which contains a 64bits-compatible version of this software.) This will enable this feature. =================== Final advice in case of recommended repair The boot files of [Ubuntu 12.04.1 LTS] are far from the start of the disk. Your BIOS may not detect them. You may want to retry after creating a /boot partition (EXT4, >200MB, start of the disk). This can be performed via tools such as gParted. Then select this partition via the [Separate /boot partition:] option of [Boot Repair]. (https://help.ubuntu.com/community/BootPartition) =================== Default settings Recommended-Repair This setting would reinstall the grub2 of sda6 into the MBR of sda, using the following options: kernel-purge Additional repair would be performed: unhide-bootmenu-10s fix-windows-boot =================== Settings chosen by the user Boot-Info This setting will not act on the MBR. No change has been performed on your computer. See you soon! pastebinit packages needed dpkg-preconfigure: unable to re-open stdin: No such file or directory pastebin.com ko (), using paste.ubuntu Please report this message to [email protected] Any help would be great, I'm really missing Ubuntu (hate being stuck in the Windows world).

    Read the article

  • Turning on screen programmatically

    - by Matroska
    Hi, I would like to unlock screen and switching it on to show a popup on an event trigger. I am able to unlock the screen using newKeyguardLock = km.newKeyguardLock(HANDSFREE); newKeyguardLock.disableKeyguard(); on KeyGuardService but I cannot turn on the screen. I am using wl = pm.newWakeLock(PowerManager.SCREEN_BRIGHT_WAKE_LOCK, HANDSFREE); wl.acquire(); but with no success. The screen still remains off. How can I achieve this? Thanks in advance. Tobia Loschiavo

    Read the article

  • Unlocking a mutex from a different thread (C++)

    - by dan
    I'm using the C++ boost::thread library, which in my case means I'm using pthreads. Officially, a mutex must be unlocked from the same thread which locks it, and I want the effect of being able to lock in one thread and then unlock in another. There are many ways to accomplish this. One possibility would be to write a new mutex class which allows this behavior. For example: class inter_thread_mutex{ bool locked; boost::mutex mx; boost::condition_variable cv; public: void lock(){ boost::unique_lock<boost::mutex> lck(mx); while(locked) cv.wait(lck); locked=true; } void unlock(){ { boost::lock_guard<boost::mutex> lck(mx); if(!locked) error(); locked=false; } cv.notify_one(); } // bool try_lock(); void error(); etc. } I should point out that the above code doesn't guarantee FIFO access, since if one thread calls lock() while another calls unlock(), this first thread may acquire the lock ahead of other threads which are waiting. (Come to think of it, the boost::thread documentation doesn't appear to make any explicit scheduling guarantees for either mutexes or condition variables). But let's just ignore that (and any other bugs) for now. My question is, if I decide to go this route, would I be able to use such a mutex as a model for the boost Lockable concept. For example, would anything go wrong if I use a boost::unique_lock< inter_thread_mutex for RAII-style access, and then pass this lock to boost::condition_variable_any.wait(), etc. On one hand I don't see why not. On the other hand, "I don't see why not" is usually a very bad way of determining whether something will work. The reason I ask is that if it turns out that I have to write wrapper classes for RAII locks and condition variables and whatever else, then I'd rather just find some other way to achieve the same effect.

    Read the article

  • Application error with MyFaces 1.2: java.lang.IllegalStateException: No Factories configured for this Application.

    - by IgorB
    For my app I'm using Tomcat 6.0.x and Mojarra 1.2_04 JSF implementation. It works fine, just I would like to switch now to MyFaces 1.2_10 impl of JSF. During the deployment of my app a get the following error: ERROR [org.apache.catalina.core.ContainerBase.[Catalina].[localhost].[/myApp]] StandardWrapper.Throwable java.lang.IllegalStateException: No Factories configured for this Application. This happens if the faces-initialization does not work at all - make sure that you properly include all configuration settings necessary for a basic faces application and that all the necessary libs are included. Also check the logging output of your web application and your container for any exceptions! If you did that and find nothing, the mistake might be due to the fact that you use some special web-containers which do not support registering context-listeners via TLD files and a context listener is not setup in your web.xml. A typical config looks like this; <listener> <listener-class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class> </listener> at javax.faces.FactoryFinder.getFactory(FactoryFinder.java:106) at javax.faces.webapp.FacesServlet.init(FacesServlet.java:137) at org.apache.myfaces.webapp.MyFacesServlet.init(MyFacesServlet.java:113) at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1172) at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:992) at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4058) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4371) ... Here is part of my web.xml configuration: <servlet> <servlet-name>Faces Servlet</servlet-name> <!-- <servlet-class>javax.faces.webapp.FacesServlet</servlet-class> --> <servlet-class>org.apache.myfaces.webapp.MyFacesServlet</servlet-class> <load-on-startup>1</load-on-startup> </servlet> ... <listener> <listener- class>org.apache.myfaces.webapp.StartupServletContextListener</listener-class> </listener> Has anyone experienced similar error, and what should I do i order to fix it? Thanx!

    Read the article

  • Javascript / Flash : When exactly are flash external callback methods triggered ?

    - by felace
    I have a flash application using callbacks to javascript functions (eg. when it receives some data over a socket, it'll call a js script which would change the content of a div according to that given data). Afaik, there is no actual mutual exclusion in javascript so I'm not sure if I can/need to simulate something like : callbackFunc() { lock(mutex1) foo unlock(mutex1) } ... someOtherFunc() { lock(mutex1) bar unlock(mutex1) } So, the question is, when are those callbacks called ? Are they simply queued to be executed right after the browser finishes its task or are they triggered randomly ?

    Read the article

  • Template type deduction with a non-copyable class

    - by Evan Teran
    Suppose I have an autolocker class which looks something like this: template <T> class autolocker { public: autolocker(T *l) : lock(l) { lock->lock(); } ~autolocker() { lock->unlock(); } private: autolocker(const autolocker&); autolocker& operator=(const autolocker&); private: T *lock; } Obviously the goal is to be able to use this autolocker with anything that has a lock/unlock method without resorting to virtual functions. Currently, it's simple enough to use like this: autolocker<some_lock_t> lock(&my_lock); // my_lock is of type "some_lock_t" but it is illegal to do: autolocker lock(&my_lock); // this would be ideal Is there anyway to get template type deduction to play nice with this (keep in my autolocker is non-copyable). Or is it just easiest to just specify the type?

    Read the article

  • MySQL Inserting into locked aliased table

    - by Whitey
    I am trying to insert data into a InnoDB MySQL table which is locked using an alias and I cannot for the life of me get it to work! The following works: LOCK TABLES Problems p1 WRITE, Problems p2 WRITE, Server READ; SELECT * FROM Problems p1; UNLOCK TABLES; But try and do an insert and it doesn't work (it claims there is a syntax error round the 'p1' in my INSERT): LOCK TABLES Problems p1 WRITE, Problems p2 WRITE, Server READ; INSERT INTO Problems p1 (SomeCol) VALUES(43534); UNLOCK TABLES; Help please!

    Read the article

  • Using an empty keystore password used to be possible?

    - by TomTasche
    When signing an apk after a long break from Android development I was surprised that I'm no longer able to enter an empty keystore password to unlock it. Is it just me or has this been possible before? If so, when did that change and how can I manage to unlock the keystore anyway? Some background: maybe I'm just crazy and didn't use an empty password for the keystore before, but the one and only possible password that I could have been using instead doesn't work either (I swear, there's no chance I'd have used another password!).

    Read the article

  • What is the best practice to segment c#.net projects based on a single base project

    - by Anthony
    Honestly, I can't word my question any better without describing it. I have a base project (with all its glory, dlls, resources etc) which is a CMS. I need to use this project as a base for othe custom bake projects. This base project is to be maintained and updated among all custom bake projects. I use subversion (Collabnet and Tortise SVN) I have two questions: 1 - Can I use subversion to share the base project among other projects What I mean here is can I "Checkout" the base project into another "Checked Out" project and have both update and commit seperatley. So, to paint a picture, let's say I am working on a custom project and I modify the core/base prject in some way (which I know will suit the others) can I then commit those changes and upon doing so when I update the base project in the other "Checked out" resources will it pull the changes? In short, I would like not to have to manually deploy updated core files whenever I make changes into each seperate project. 2 - If I create a custom file (let's say an webcontrol or aspx page etc) can I have it compile seperatley from the base project Another tricky one to explain. When I publish my web application it creates DLLs based on the namespaces of projects attached to it. So I may have a number of DLLs including the "Website's" namespace DLL, which could simply be website. I want to be able to make a seperate, custom, control which does not compile into those DLLs as the custom files should not rely on those DLLS to run. Is it as simple to set a seperate namespace for those files like CustomFiles.ProjectName for example? Think of the whole idea as adding modules to the .NET project, I don't want the module's code in any of the core DLLs but I do need for module to be able to access the core dlls. (There is no need for the core project to access the module code as it should be one way only in theory, though I reckon it woould not be possible anyway without using JSON/SOAP or something like that, maybe I am wrong.) I want to create a pluggable environment much like that of Joomla/Wordpress as since PHP generally doesn't have to be compiled first I see this is the reason why all this is possible/easy. The idea is to allow pluggable themes, modules etc etc. (I haven't tried simply adding .NET themes after compile/publish but I am assuming this is possible anyway? OR does the compiler need to reference items in the files?)

    Read the article

  • I can't get areas working in VS2010

    - by devlife
    I just upgraded from VS2010 RC to RTM. Now my areas aren't working. I have a Profile area with a Home controller and an Action method Index(). If I try: http://localhost:4951/profile I get a 404 error saying that the resource can't be found. If I try http://localhost:4951/profile/home I get the same error. However, if I try http://localhost:4951/profile/home/index then the view is returned. Here is my ProfileAreaRegistration: public class ProfileAreaRegistration : AreaRegistration { public override string AreaName { get { return "Profile"; } } public override void RegisterArea(AreaRegistrationContext context) { context.MapRoute( "Profile_Unlock", "Profile/Unlock/{userID}/{unlockID}", new { controller = "Unlock", action = "Index" }, new { userID = new GuidRouteConstraint(), unlockID = new GuidRouteConstraint() } ); context.MapRoute( "Profile_default", "Profile/{controller}/{action}/{id}", new { action = "Home", id = UrlParameter.Optional } ); } Does anyone know what is going wrong?

    Read the article

  • How to pass a linc to class function and call it?

    - by Kabumbus
    So I have a class like class mySafeData { public: void Set( int i ) { myMutex.lock(); myData = i; myMutex.unlock(); } void Get( int& i) { myMutex.lock(); i = myData; myMutex.unlock(); } private: int myData; boost::mutex myMutex; }; its instance is running. Lets call instance A. I want to create a new class that would take as a start up argument some kind of link to Getter from A and would be capable to somehow save link to thet getter for calling it inside its private methods vhen needed. how to do such thing?

    Read the article

  • Mixing synchronized() with ReentrantLock.lock()

    - by yarvin
    In Java, do ReentrantLock.lock() and ReetrantLock.unlock() use the same locking mechanism as synchronized()? My guess is "No," but I'm hoping to be wrong. Example: Imagine that Thread 1 and Thread 2 both have access to: ReentrantLock lock = new ReentrantLock(); Thread 1 runs: synchronized (lock) { // blah } Thread 2 runs: lock.lock(); try { // blah } finally { lock.unlock(); } Assume Thread 1 reaches its part first, then Thread 2 before Thread 1 is finished: will Thread 2 wait for Thread 1 to leave the synchronized() block, or will it go ahead and run?

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >