Search Results

Search found 11107 results on 445 pages for 'drive bay'.

Page 95/445 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Copy all installed programs & files in a hard disk (which has 32 bit Windows 7) and clone/transfer it to another computer which has 64 bit Windows 7

  - by galacticninja

  I recently got a new PC which has a 64-bit Windows 7 installed. The current PC that I am using has a 32-bit Windows 7 installed. I would like to know if there is a software that can copy all my installed programs and files in the hard disk with the 32-bit Windows 7 PC and transfer it to the newer PC's hard disk which has a 64 bit version of Windows 7. This is essentially like "cloning" a hard disk but I would like to use a 64-bit OS in the target drive, instead of also using the 32-bit OS of the source drive. I would like to do this I can avoid reinstalling and reconfiguring my installed programs and files again on the new PC. If possible, I would like the new PC to work as it was in my previous PC, with the installed programs, configuration and files intact except that the OS is now 64-bit and the hard disk has a larger capacity. I have heard of programs that can clone a hard disk, but my concern is that the 32-bit Windows 7 OS will also be cloned to the new 64-bit PC. If it is not possible to transfer my installed programs and settings like the way I described, are there software that can make it easier to migrate my installed programs, their configurations and my files from a 32-bit Windows 7 PC to a 64-bit Windows 7 PC? Details: I have a SATA to USB connector/adapter to copy files in the current hard disk to the newer one. The two PCs are connected through LAN, so I can also transfer files through LAN. Both PCs only have one hard disk.

  Read the article

• Windows 7: Moving Program Files location during install using unattend.xml

  - by Shevek

  I am planning on using an unattend.xml to create a Windows 7 Ultimate 64-bit setup with Users and ProgramData on a 2nd drive. I have found many samples of how to do this (see below). However I would also like to move Program Files to a 3rd drive as well. i.e.: C:\Windows [SSD] D:\Users [HDD1] D:\ProgramData [HDD1] P:\Program Files [HDD2] P:\Program Files (x86) [HDD2] I have found that this was possible using unattend.txt in XP but all documentation or examples I find about Win 7 only mention Users and ProgramData, not Program Files. Is this possible using an answer file? Sample unattend.xml for Users and ProgramData: <?xml version="1.0" encoding="utf-8"?> <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="oobeSystem"> <component name="Microsoft-Windows-Shell-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <FolderLocations> <ProfilesDirectory>D:\Users</ProfilesDirectory> <ProgramData>D:\ProgramData</ProgramData> </FolderLocations> </component> </settings> </unattend>

  Read the article

• why does the partition start on sector 2048 instead of 63

  - by gcb

  I had two drives partitioned the same and running 2 raid partitions on each. One died and I replaced it under warranty for the same model. While trying to partition it, the first partition can only start on sector 2048, instead of 63 that was before. Driver have different geometry as previous and remaining ones. (Fewer heads/more cylinders) old drive: $ sudo fdisk -c -u -l /dev/sdb Disk /dev/sdb: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000aa189 Device Boot Start End Blocks Id System /dev/sdb1 * 63 174080339 87040138+ 83 Linux /dev/sdb2 174080340 182482334 4200997+ 82 Linux swap / Solaris /dev/sdb3 182482335 3907024064 1862270865 fd Linux raid autodetect remanufactured drive received from warranty: $ sudo fdisk -c -u -l /dev/sda Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 81 heads, 63 sectors/track, 765633 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000d0b5d Device Boot Start End Blocks Id System /dev/sda1 2048 ... why is that?

  Read the article

• Is there a clean way to obtain exclusive access to a physical partition under Windows?

  - by zneak

  Hey guys, I'm trying, under Windows 7, to run a virtual machine with VMWare Player from an OS installed on a physical partition. However, when I boot the virtual machine, VMWare Player says that it couldn't access the physical drive for writing. This seems to be a generally acknowledged problem in the VMWare community, as Windows Vista introduced a compelling new security feature that makes it impossible to write to a raw drive without obtaining exclusive access to it first. I have googled the issue and found a few workarounds. However, the clean ones seem to only work on whole physical disks, and not on partitions. So I would be left with the dirty solution. In short, it meddles with the MBR to erase any trace of the partitions to use, makes Windows forget about them, then restores the MBR so we can launch the VM. I'm not sure I want to do that. Is there a way to let VMWare acquire exclusive access to the partition without requiring me to nuke it away? What I'd be looking for, I suppose, is a way to put just partitions offline instead of whole physical drives.

  Read the article

• How do I copy files between harddrives on Ubuntu CLI?

  - by ed209

  I have a dedicated server with a 120gb main ssd. The server happens to come with a couple of 3000GB hard drives. I'd like to use them to back up my main drive. Preferably, I'd like one as an exact copy of the main SSD and the other with incremental backups of the mysql database and a user uploads file. These are the drives I have Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f2e18 Device Boot Start End Blocks Id System /dev/sda1 2048 4196352 2097152+ 83 Linux /dev/sda2 4198400 5246976 524288+ 83 Linux /dev/sda3 5249024 234441647 114596312 83 Linux Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdb doesn't contain a valid partition table Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders, total 5860533168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/sdc doesn't contain a valid partition table The first problem I have, is that I have no idea how to copy from one drive to another. Kind of embarrassing I know, but I don't know where to start. I'm thinking of this in terms of Mac OS cli where I'm able to copy between /Volumes - is there an equivalent? (there is nothing under /mnt or /media)

  Read the article

• Why is windows not able to create a system partition?

  - by hughes

  I'm reinstalling Windows 7 64 bit, and I encountered an issue I've never seen before. I have a legit copy of Win 64 Professional, and I've installed it probably a half dozen times on this machine in the past without a problem. Googling the error only brings me to issues with people who are upgrading to win7. The drive itself seems to not have a problem. I can mount it on other systems and I can create an NTFS partition on it on other machines. I can install Ubuntu on it without any issues. Additionally, if I try using my alternate backup hard drive, the installer gives the same error. I have run diskpart from the setup page and clean seems to report that all is well. However, I cannot get past the screen below, which says Setup was unable to create a new system partition or locate an existing system partition. This happens regardless of whether or not the disk space is already allocated. What is causing this? How do I solve or get past this?

  Read the article

• In Windows 7 power management, is it possible to set different sleep settings for different SATA disks?

  - by Ben Voigt

  I'm having an issue with Windows 7 either freezing up or generating a BSOD coming out of sleep. I suspect that it is related to my boot/OS drive, an OCZ Vertex SE SSD, because numerous other Vertex users have reported sleep problems. Notably, if I put the computer to sleep, it almost always wakes correctly. If it goes to sleep after a timeout, it almost always BSODs. I disabled timed sleep and now it freezes when left unattended. My next step is to disable "Put hard disks to sleep after X minutes", but I'd like to change this setting only for the SSD and not for the rotating data disks, which I would like to spin down normally. Does anyone know a place to configure sleep on a per-disk basis? I don't need to set different timeouts on different disks (although that would be nice), simply setting "this disk sleeps" and "sleep is disabled for this disk" would be great. Additional system information: Windows 7 Ultimate x64, Core i5 - P55 chipset, Intel RST drivers are installed. One SSD, two rotating HDD, and a DVD-RW drive are all connected to the Intel SATA ports. I could potentially move some of these to my motherboard's other SATA controller if that would help.

  Read the article

• Why does my simple Raid 1 backup storage perform really slow sometimes?

  - by randomguy

  I bought 2x Samsung F3 EcoGreen 2TB hard disks to make a backup storage. I put them in Raid 1 (mirror) mode. Made a single partition and formatted it to NTFS, running Windows 7. For some reason, accessing the drive's contents (simply by navigating folders) is sometimes really slow. Like opening D:/photos/ can sometimes take several seconds before it starts showing any of the folder's contents. Same applies for other folders. What could be causing this and what could I do to improve the performance? I remember that there was an option somewhere inside Windows to choose fast access but less reliable persistence operations (read/write). It was a tick inside some dialog. At the time, it felt like a good idea to take the tick away from the option and get more reliable persistence but slower access, but now I'm regretting. I'm unable to find this dialog.. I've looked hard. I don't know, if it would make any difference. Oh, and I've ran scan disk and defrag on the drive. No errors and speed isn't improved.

  Read the article

• What does the 'Burst Rate' stat mean in HDTune?

  - by UpTheCreek

  I recently upgraded my laptop's v slow hard drive to a seagate momentus 7200. Everything is working fine, but I'm a bit confused by these benchmark results: The burst rate is significantly less than the Maximim transfer rate, and not much higher than the normal minimum (if you ignore the spikes). What's going on here? On the HDtune website it defines Burst Rate as: ...the highest speed (in megabytes per second) at which data can be transferred from the drive interface (IDE or SCSI for example) to the operating system. Which begs some questions... e.g. if this is the highest, then how did the bechmarking tool record the 103MB/sec maximum? And if this really is the true maximum, then where is the bottleneck? The laptops SATA interface is on an Intel 82801GBM southbridge controller. When I check in hardware manager, I see that it's driver is iaStor.sys from 2005. Maybe that's the issue? I'll look for a newever version, but any insights would be appreciated. Thanks

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Setting up a virtual ftp directory that points to another computer

  - by AngryHacker

  I have II5 sitting on an old Windows 2000 Professional box. It has an FTP site there that allows me to access files. It works great, no problem at all. However, now I need to setup a virtual directory that points to a share on another computer on the network (running Windows XP Tablet Edition). The share requires a user name and password. The network is a simple workgroup (i don't have any domains or any of that). What is the correct procedure for that? I've tried setting a share via UNC and typing in the UserID/Password when asked. But when I finished, the virtual machine showed up as an error in the IIS Manager and couldn't access it. I mapped the share onto a drive and then tried to setup a virtual directory with this drive. Same result. Is there something simple I am missing? Would upgrading any part of the picture help at all?

  Read the article

• How to fix Windows 7 device removal notification loop

  - by Barry Kelly

  Bit of an odd one this. One of our PCs is getting caught in a loop some time after being turned on, usually after a USB storage device has been attached - sometimes an iPod, sometimes a GPS. Specifically, Windows Explorer starts showing a drive icon and letter (E:, as of right now) for the System partition (the small hidden one at the start of the boot drive). Then, the icon disappears. Then it reappears again. And disappears. It does this very quickly, at what looks like maybe 50 times a second. CPU usage in this loop is also very high; averages about 66%. This machine has an i7 920 CPU, which is quad core with hyperthreading; so this usage rate works out to about 5 100% busy threads, along with whatever normal idle load is (particularly Task Manager itself). Inspecting with Process Explorer shows that the device removal notification infrastructure has gone berserk. The threads in system service processes (i.e. apart from Windows Explorer) which are using all the CPU power relate to device notification. The Disk Management MMC snap-in also fails to run when the loop starts. The only way to break the loop, it seems, is to reboot the machine. Anyone seen anything similar to this, and know of a way to fix it? Machine details: Windows 7 x64, fully patched i7 920, 12GB RAM Intel SSD 80GB (X25-M, I believe; not G2) 2TB 5.2K disk for bulk storage AMD HD 5870 Further hardware details await. I'm going to go through and update all drivers I can find.

  Read the article

• Running an executable on network share with CustomAction with wix?

  - by martin

  Hello, i have created a msi-package which compresses some xml-files to a zip-file during installation. I have created a CustomAction for this purposes: <CustomAction Id="CompressMy" BinaryKey="zipEXE" ExeCommand="a -tzip &quot;[TEMPLATE_DIR]my.zip&quot; &quot;[TempSourceFolder]data.xml&quot;" Return="check" HideTarget="no" Impersonate="no" Execute="deferred" /> The installation works fine, if i try to install to a local drive, but recently a customer wanted to install [TEMPLATE_DIR] to a network drive on Windows Vista. The CustomAction fails, because of the elevated install-user hasn't mapped the network drive, even if the installer-calling user has mapped the drive. This happens also, if I try to install to an unc-path. I use 7zip for compressing. I have added it to my msi-package. I have tried to set Impersonate="yes", but then the Installations fails, if my TEMPLATE_DIR is f.e. the ProgramData-dir. Do you have any idea what i can do? I thinked about checking if TEMPLATE_DIR is a network path, but I didn't know how i can check this. Or do you have any other Ideas how I can provide a local and a network installation while using this custom action. Would be great if there are any advices, greetings, Martin

  Read the article

• Method not found: 'Void Google.Apis.Util.Store.FileDataStore..ctor(System.String)'

  - by user3732193

  I've been stuck at this for days now. I copied the exact codes from google api samples to upload files to Google Drive. Here is the code UserCredential credential = GoogleWebAuthorizationBroker.AuthorizeAsync( new ClientSecrets { ClientId = ClientId, ClientSecret = ClientSecret, }, new[] { DriveService.Scope.Drive, DriveService.Scope.DriveFile }, "user", CancellationToken.None, new FileDataStore("MyStore")).Result; But it would throw an exception at runtime: Method not found: 'Void Google.Apis.Util.Store.FileDataStore..ctor(System.String)'. I already added the necessary Google Api dlls. Or if anyone could suggest a better code for uploading files to Google Drive in a website which implements Server-Side Authorization. Any help would be greatly appreciated. UPDATE: I changed my code to this var token = new TokenResponse { RefreshToken = "1/6hnki1x0xOMU4tr5YXNsLgutzbTcRK1M-QOTEuRVxL4" }; var credentials = new UserCredential(new GoogleAuthorizationCodeFlow(new GoogleAuthorizationCodeFlow.Initializer { ClientSecrets = new ClientSecrets { ClientId = ClientId, ClientSecret = ClientSecret }, Scopes = new[] { DriveService.Scope.Drive, DriveService.Scope.DriveFile } }), "user", token); But it also throws an exception: Method not found: 'Void Google.Apis.Auth.OAuth2.Flows.GoogleAuthorizationCodeFlow..ctor(Initializer). Is the problem with the dlls?

  Read the article

• Mounting NAS drive with cifs using credentials file through fstab does not work

  - by mahatmanich

  I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

  Read the article

• 100% iowait + drive faults in dmesg

  - by w00t

  Hi, I have a server on which resides a fairly visited web app. It has a raid1 of 2 HDDs, 64MB Buffer, 7200 RPM. Today it started throwing out errors like: kernel: ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen kernel: ata2.00: cmd b0/d0:01:00:4f:c2/00:00:00:00:00/00 tag 0 pio 512 in kernel: res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) kernel: ata2.00: status: { DRDY } kernel: ata2: hard resetting link kernel: ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: max_sectors limited to 256 for NCQ kernel: ata2.00: configured for UDMA/133 kernel: sd 1:0:0:0: timing out command, waited 7s kernel: ata2: EH complete kernel: SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB) kernel: sda: Write Protect is off kernel: SCSI device sda: drive cache: write back All day long it has been in load higher than 10-15. I am monitoring it with atop and it gives some bizarre readings: DSK | sda | busy 100% | read 2 | write 208 | KiB/r 16 | KiB/w 32 | MBr/s 0.00 | MBw/s 0.65 | avq 86.17 | avio 47.6 ms | DSK | sdb | busy 1% | read 10 | write 117 | KiB/r 17 | KiB/w 5 | MBr/s 0.02 | MBw/s 0.07 | avq 4.86 | avio 1.04 ms | I frankly don't understand why only sda is taking all the hit. I do have one process that is constantly writing with 1-2megs but what the hell.. 100% iowait?

  Read the article

• Windows Home Server installation fails because it can't find the DVD drive anymore

  - by BBlake

  I've got an old Dell Dimension 8300 desktop I decided to convert into a WHS box. I popped in a pair of 1 TB SATA drives, which were recognized fine by the BIOS and the currently installed OS (XP), so I decided to go ahead and install WHS. Near the end of the installation, WHS acts like it can no longer find the DVD drives (either of them, the box has a DVDROM and a DVDRW). The specific error is gives is the "Can't configure storage" error. I've found several forums where people say they get this error if they remove the boot DVD during the installation (at the time of the first reboot). However, I never removed the DVD. After the error, if fails into WHS, so it did mostly install and I can work with WHS. However, it refuses to recognize the network card, video card and while it shows the two DVD drives, any CD/DVD I insert in either drive the system says is corrupted and unreadable, even though none of them are. I've tried several reinstalls both removing and not removing the DVD, but the result is the same regardless. Any other tricks anyone found? If I can't figure this out, maybe I'll just install SBS2008 and fake it up to be similar to WHS with some addin tools. Shouldn't be too hard to create something since WHS is based on SBS2003 anyway.

  Read the article

• How to move Mdadm RAID drive (EBS based) to different AWS Instance

  - by Stanley

  We have a media-rich web application that is hosted on AWS. We have several Web Servers and we have an NFS server. On the NFS server (Linux server) we have several EBS volumes that are mounted and we've used mdadm to implement the different mounted volumes as a single RAID volume. The Web Servers simply access the NFS storage through a mount point. Amazon has now let us know that they will be performing power maintenance on this server in a couple of days time. Since all our media is on here it would render our site unusable for the hours while Amazon is working on it. We want to try and prevent this downtime. I was thinking that we can prevent server downtime by perhaps setting up a new server temporarily and attaching the EBS drives (raid volume) to that server and have our web servers point there during maintenance. This is a very high risk operation since this involves several terabytes of our production data. What would be the safe way to move over our logical raid drive (md0) to a new amazon instance? I was hoping that I could start with building the new server, mounting the ebs volumes and assembling the RAID partition using mdadm --assemble --scan before unmounting from the existing instance so that I can first test that everything works and thus having it mounted on two instances at the same time, but I don't believe that is possible with the way that filesystems work. How do I move a Linux software RAID to a new machine? suggests a way to move drives, but isn't really a cloud-based question. Perhaps there are simpler ways to prevent system downtime with our solution being hosted on the cloud? I have considered taking an EBS snapshot, but that tries to replicate all the many terabytes of mounted storage, so this is not a practical solution. Any ideas?

  Read the article

• Windows : Map-a-network-drive to a remote Shared-Folder (on QNAP NAS) using OpenVPN

  - by spelltox

  Provided my lack of networking knowledge, I've been struggling with this issue for quite a few days now : I have a QNAP-TS212 NAS on which i've created a shared-folder (mostly excel files). All the computers in the local network (windows) are able to access it without any problem. Now, i want to access that shared-folder remotely (windows client), so : I enabled OpenVPN (and PPTP) in QNAP admin. Installed OpenVPN on the remote client. Applied the configuration file that the QNAP generated - Configuration (openvpn.ovpn) : client dev tun script-security 3 proto udp remote ***MY_WAN_IP*** 1194 resolv-retry infinite nobind ca ca.crt auth-user-pass reneg-sec 0 cipher AES-128-CBC comp-lzo OpenVPN connect successfully from the remote client. Now, here's my problem : I can ping the NAS (got IP 10.8.0.1) from the remote client, But when i try to map-a-network-drive, i don't see the shared folder or the NAS or any of the other computers in the network... I checked - all computers are in "WORKGROUP" workgroup. I'm probably missing some basic knowledge, So - any help would be greatly appreciated ! Many thanks.

  Read the article

• Windows 7 mapped drive kicking off OS X users

  - by Collin White

  I've mapped a network drive on my Windows 7 PC at my office. The windows machine has a few TB of storage that is being accessed by my development team (all running mac os 10.7). The share seems to work fine for a little while but will timeout and kick the mac users off and sometimes disallows a connection on the next attempt. Restarting the windows machine fixes the problem. I've tried this tutorial as well as setting the maximum session length in the Local Security Policy section to 99999 (I discovered 0 did not mean unlimited, only a 'reasonable ammount of time') anyway, the setting is now for ~208 days which is sufficient (see attached). I'm having trouble debugging this in general so if anyone has some pointers I'm all ears. This is a intermittent issue which in my opinion are the hardest kinds to debug. If anyone knows of how I might monitor connections from the PC that would also be pretty cool. Previously the files were hosted on a mac mini and everything was working just fine (the mini just didn't have the ability for the storage capacity we needed) so I believe it is some windows setting that is kicking users off. Anyway, thanks for reading.

  Read the article

• How to move your Windows User Profile to another drive in Windows 8

  - by Mark

  I like to have my user folder on a different drive (D:) than my OS is (C:). Reading the following post I decided to give it a try. All went quite well, untill I found out that my Windows 8 Apps won't execute anymore (other than that I didn't noticed any problems). My apps do work, while using an account that isn't moved. In the eventviewer I've found error messages like these: App <Microsoft.MicrosoftSkyDrive> crashed with an unhandled Javascript exception. App details are as follows: Display Name:<SkyDrive>, AppUserModelId: <microsoft.microsoftskydrive_8wekyb3d8bbwe!Microsoft.MicrosoftSkyDrive> Package Identity:<microsoft.microsoftskydrive_16.4.4204.712_x64__8wekyb3d8bbwe> PID:<4452>. The details of the JavaScript exception are as follows Exception Name:<WinRT error>, Description:<Loading the state store failed. > , HTML Document Path:</modernskydrive/product/skydrive/App.html>, Source File Name:<ms-appx://microsoft.microsoftskydrive/jx/jx.js>, Source Line Number:<1>, Source Column Number:<27246>, and Stack Trace: ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:27246 localSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:51544 _initSettings() ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:54710 getApplicationStatus(boolean) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:48180 init(object) ms-appx://microsoft.microsoftskydrive/jx/jx.js:1:45583 Application(number, boolean) ms-appx://microsoft.microsoftskydrive/modernskydrive/product/skydrive/App.html:216:13 Anonymous function(object) Using ProcMon, I see a lot of access denied messages, like these: Date & Time: 12-9-2012 9:32:20 Event Class: File System Operation: CreateFile Result: ACCESS DENIED Path: D:\Users\John\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe\Settings\settings.dat TID: 2520 Duration: 0.0000149 Desired Access: Read Data/List Directory, Write Data/Add File, Read Control Disposition: OpenIf Options: Sequential Access, Synchronous IO Non-Alert, No Compression Attributes: N ShareMode: None AllocationSize: 0 Any idea how to solve this? I noticed that the app folders e.g.: D:\Users\john\AppData\Local\Packages\microsoft.microsoftskydrive_8wekyb3d8bbwe had a different owner than the old profile folder had. Old profile folder had john as owner where my new profile folder had the Administrators group as owner. Changing this didn't help unfortunately.

  Read the article

• How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

  - by Stephen

  I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

  Read the article

• Windows Phone sync error when syncing with iTunes on different Hard Drive

  - by njallam

  I have my iTunes library file on a separate hard drive (which I believe may be the cause of the problem) and I have been trying to use it to synchronize with my Windows Phone. I would like to first note that if I set up my phone to synchronize with 'Windows Libraries', then it works fine. This is however not ideal as I have categorised my music and made playlists etc, on iTunes. When I first link my Windows Phone to the Windows Phone App (for desktop) and select iTunes from the above selection, I get the following error message: After searching that error, I found the following forum threads: Fix for error 8300300B when trying to sync Lumia 920 Windows 8 Phone in PC? Error code 8300300B on Windows Phone 8 while trying to sync I've tried the workarounds described in the above threads, however, they did not work for me. If I ignore that error message, I see the expected interface, along with all of my iTunes library's media, however the 'Sync' button is greyed out. I have tried some other things to try and fix this: Removing the app's AppData folder Uninstalling, reinstalling Using the full-screen modern app (does not allow for iTunes syncing)

  Read the article

• Windows: disable remote access of local drive, even by domain admin

  - by Matt

  We have a network of Windows 7 PCs that are managed as part of a domain. What we want is for the domain admin to be unable to view the PC's local drive (C:) unless he is physically at the PC. In other words, no remote desktop and no ability to use UNC. In other words, the domain admin should not be allowed to put \\user_pc\c$ in Windows Explorer and see all the files on that computer, unless he is physically present at the PC itself. Edit: to clarify some of the questions/comments that have come up. Yes, I am an admin---but a complete Windows novice. And yes, for the sake of this and my similar questions, it is fair to assume that I am working for someone who is paranoid. I understand the arguments about this being a "social problem versus a technical problem", and "you should be able to trust your admins", etc. But this is the situation in which I find myself. I'm basically new to Windows system administration, but am tasked with creating an environment that is secure by the company owner's definition---and this definition is clearly very different from what most people expect. In short, I understand that this is an unusual request. But I'm hoping there is enough expertise in the ServerFault community to point me in the right direction.

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >