Search Results

Search found 40122 results on 1605 pages for 'ms access 2007'.

Page 95/1605 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Wireless ad-hoc network between Ubuntu and MS Windows

    - by nixnotwin
    I have setup a wireless ad-hoc connection between two laptops: one running ubuntu and the other MS XP. I have assigned static IP to both the laptops and both get connected quite easily. I can access all ubuntu services like ssh, squid, samba from the laptop running MS Windows. But from Ubuntu machine I cannot access any Windows services like shared directories etc. The Windows machine doesn't even respond to ping requests from ubuntu.

    Read the article

  • Bugs in Excel's ActiveX combo boxes?

    - by k.robinson
    I have noticed that I get all sorts of annoying errors when: I have ActiveX comboboxes on a worksheet (not an excel form) The comboboxes have event code linked to them (eg, onchange events) I use their listfillrange or linkedcell properties (clearing these properties seems to alleviate a lot of problems) (Not sure if this is connected) but there is data validation on the targeted linkedcell. I program a fairly complex excel application that does a ton of event handling and uses a lot of controls. Over the months, I have been trying to deal with a variety of bugs dealing with those combo boxes. I can't recall all the details of each instance now, but these bugs tend to involve pointing the listfillrange and linkedcell properties at named ranges, and often have to do with the combo box events triggering at inappropriate times (such as when application.enableevents = false). These problems seemed to grow bigger in Excel 2007, so that I had to give up on these combo boxes entirely (I now use combo boxes contained in user forms, rather than directly on the sheets). Has anyone else seen similar problems? If so, was there a graceful solution? I have looked around with Google and so far haven't spotted anyone with similar issues. Some of the symptoms I end up seeing are: Excel crashing when I start up (involves combobox_onchange, listfillrange-named range on another different sheet, and workbook_open interactions). (note, I also had some data validation on the the linked cells in case a user edited them directly.) Excel rendering bugs (usually when the combo box changes, some cells from another sheet get randomly drawn over the top of the current sheet) Sometimes it involves the screen flashing entirely to another sheet for a moment. Excel losing its mind (or rather, the call stack) (related to the first bullet point). Sometimes when a function modifies a property of the comboboxes, the combobox onchange event fires, but it never returns control to the function that caused the change in the first place. The combobox_onchange events are triggered even when application.enableevents = false. Events firing when they shouldn't (I posted another question on stack overflow related to this). At this point, I am fairly convinced that ActiveX comboboxes are evil incarnate and not worth the trouble. I have switched to including these comboboxes inside a userform module instead. I would rather inconvenience users with popup forms than random visual artifacts and crashing (with data loss).

    Read the article

  • Crawling not working windows2008

    - by axtolf
    Hi, We installed a new MOSS 2007 farm on windows 2008 SP2 enviroment. We used SQL2008 too. Configuration is 1 index, 1 FE and 1 server with 2008, all on ESX 4.0. All the Service that need it uses a dedicated user, so search has a dedicated user. Installation went well and we found no problem. We installed an SP1 MOSS from a ISO and after we upgraded WSS and MOSS to SP2. We installed the Italian language pack too and patched it to SP2. We created a new SSP. We created a web application and created a root website under it. The problem is that we can't male crawling work in any way. Seems that crawling is not able to reach the web application that we want to crawl. In event viewer of the index we have this error when we try to crawl it: The start address <h..p://name.domain.it:81 cannot be crawled. Context: Application 'SSP1', Catalog 'Portal_Content' Details: The object was not found. (0x80041201) The log of crawling from the search admin, only says: h..p://name.domani.it:81 The object was not found. (The item was deleted because it was either not found or the crawler was denied access to it.) The domain is fully accessible from everywhere using both farm admin user or the search user that we are using for service to run. Site is fully accessible from the index and seem not have problem. Inside the we application we created a root site collection with a couple of file. The log of the farm simply says.... nothing! When we ask to do a full crawl of the site, it runs for a second and after we have the errors that I wrote above. But the farm's log says nothing. Any suggestion or help is really appreciated since we are losing a lot of time on it and really we do not have any idea of what's wrong about this farm.

    Read the article

  • Opening HTML Table in Excel - numbers are getting changed

    - by nickfranceschina
    so I have this HTML table with a bunch of big numbers in it that I want to open in Excel 2007... you can follow along at home: <table> <tr> <td>this is a big number</td> </tr><tr> <td>1111111</td> </tr><tr> <td>2335322864</td> </tr><tr> <td>23353228641</td> </tr><tr> <td>233532286418</td> </tr><tr> <td>2335322864187</td> </tr><tr> <td>23353228641877</td> </tr><tr> <td>233532286418777</td> </tr><tr> <td>2335322864187774</td> </tr><tr> <td>23353228641877745</td> </tr><tr> <td>233532286418777456</td> </tr><tr> <td>2335322864187774562</td> </tr><tr> <td>23353228641877745623</td> </tr><tr> <td>233532286418777456238</td> </tr> when I open this file in Excel it starts converting those numbers to scientific notation when they get over 10 digits in length... and in doing so, it starts changing the actual number and replaces least significant digits to zeros how can I tell Excel not to do this?

    Read the article

  • Advice on "Invalid Pointer Operation" when using complex records

    - by Xaz
    Env: Delphi 2007 <JustificationI tend to use complex records quite frequently as they offer almost all of the advantages of classes but with much simpler handling.</Justification Anyhoo, one particularly complex record I have just implemented is trashing memory (later leading to an "Invalid Pointer Operation" error). This is an example of the memory trashing code: sSignature := gProfiles.Profile[_stPrimary].Signature.Formatted(True); On the second time i call it i get "Invalid Pointer Operation" It works OK if i call it like this: AProfile := gProfiles.Profile[_stPrimary]; ASignature := AProfile.Signature; sSignature := ASignature.Formatted(True); Background Code: gProfiles: TProfiles; TProfiles = Record private FPrimaryProfileID: Integer; FCachedProfile: TProfile; ... public < much code removed > property Profile[ProfileType: TProfileType]: TProfile Read GetProfile; end; function TProfiles.GetProfile(ProfileType: TProfileType): TProfile; begin case ProfileType of _stPrimary : Result := ProfileByID(FPrimaryProfileID); ... end; end; function TProfiles.ProfileByID(iID: Integer): TProfile; begin <snip> if LoadProfileOfID(iID, FCachedProfile) then begin Result := FCachedProfile; end else ... end; TProfile = Record private ... public ... Signature: TSignature; ... end; TSignature = Record private public PlainTextFormat : string; HTMLFormat : string; // The text to insert into a message when using this profile function Formatted(bHTML: boolean): string; end; function TSignature.Formatted(bHTML: boolean): string; begin if bHTML then result := HTMLFormat else result := PlainTextFormat; < SNIP MUCH CODE > end; OK, so I have a record within a record within a record, which is approaching Inception level confusion and I'm the first to admit is not really a good model. Clearly i am going to have to restructure it. What I would like from you gurus is a better understanding of why it is trashing the memory (something to do with the string object that is created then freed...) so that i can avoid making these kinds of errors in future. Thanks

    Read the article

  • Exchange SBS 2003 server stopped receiving mail over the weekend, senders getting "Relay access deni

    - by Charlie W.
    Firstly, I should say that I know my way around Windows very well, I don't really know the first thing about Exchange. I am trying to support a user that is running an SBS2003 Server with Exchange. Over the weekend, everyone sending something to any of his addresses gets an error message like the following: Delivery to the following recipient failed permanently: [email protected] Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 5.7.1 <[email protected]>: Relay access denied (state 14). ----- Original message ----- Received: by 10.114.18.7 with SMTP id 7mr5572745war.127.1275423472120; Tue, 01 Jun 2010 13:17:52 -0700 (PDT) MIME-Version: 1.0 Sender: [email protected] Received: by 10.143.10.15 with HTTP; Tue, 1 Jun 2010 13:17:32 -0700 (PDT) From: My Name <[email protected]> Date: Tue, 1 Jun 2010 15:17:32 -0500 X-Google-Sender-Auth: XiPrP8Em_6Eb94EH9m84nJVGvCY Message-ID: <[email protected]> Subject: TEST To: Client <[email protected]> Content-Type: multipart/alternative; boundary=001636b1484ffe72470487fdaa5b There are a host of errors in the Application log, but nothing that leaps out at me as being obvious. But then again, I don't really know what I'm looking for. Any help would be greatly appreciated.

    Read the article

  • Microsoft Access: computer freezes when user tries to update record

    - by CarlF
    A colleague and I have developed an Access 2003 database which is used throughout our department. Currently about four dozen people do data entry using one of two very similar forms. If 47 of us use them, they work perfectly. If Mr. 48 clicks the "Save" button, Windows XP freezes and a hard reset is needed. The problem has to be on his specific computer (Dell latitude D630) and not in the code because this problem only affects him. Complicating the matter: I don't work for IS, and this project is not supported by IS. If I'm going to get our tech support to fix the problem I had better be able to explain exactly what to do and how to do it, because they aren't going to invest any resources. I don't even have admin rights on the computer (and neither does its regular user). I've asked him to bring his laptop the next time he visits my building. (Just to make matters worse, he doesn't usually work in the same location as me or the other developer.) Any suggestions on debugging the problem? My first try will be to uninstall and reinstall Office, which I can do using corporate utilities without being admin. Note: yes, those are old versions of Office and Windows. We expect to upgrade later this year.

    Read the article

  • Client unable to access OWA website after temporarily changing SSL certificate on the server

    - by Lorenz Meyer
    I have the following issue: One client computer (Windows XP) cannot access the OWA website. All other client computers can (Except another one in the same remote office). How this happened: I temporarily changed the SSL certificate on the Exchange Server yesterday. After a few minutes, I reverted back, an now the same certificate that was installed for years is back again. During these few minutes, they were in OWA on this computer and got a certificate error. What exactly happens: Internet Explorer displays the error Internet Explorer cannot display the webpage, Firefox displays The connection was reset and Crome shows This webpage is not available. The connection to ... was interrupted. What I already did to try to get this working: Restart the client computer Restart the exchange server Deleted Internet Explorer browsing history In IE, Internet Options, tab Content, under Certificates deletes SSL cache Restored Internet Explorer to the default parameters I looked into certmgr.msc, but did not find a certificate related to the issue What could I do else to narrow down the origin of this problem (or better: resolve it) ? Can you give any advice ?

    Read the article

  • Routing and authenticating all access through squid

    - by Knight Samar
    Hi, I want to route all Internet access in my network through a Squid proxy server and authenticate and log all users. I want this to be a client-independent setting so that no one needs to do anything on their browsers or machines. I have set my network gateway as the proxy server so that all traffic will be sent to it. I have done this using options in DHCP server. Now I tried using squid as a transparent proxy, but then it won't authenticate in that mode. I tried using iptables to route all traffic to port 3128 but it won't popup the authentication dialog box from SQUID. I tried telling DHCP to give WPAD to all clients by placing a WPAD file on a webserver containing the following for automatic proxy configuration on clients: Changes in dhcpd.conf option wpad code 252 =test; option wpad "\n\000"; option wpad "http://192.168.1.5/wpad.dat\n"; The WPAD file: function FindProxyForURL(url,host) { return "PROXY squid-server-ip-address:3128 ; DIRECT "; } But the browsers (different versions of Firefox and IE) seem to ignore it. :( What should I do ?

    Read the article

  • Wireless Access Point stopped working

    - by Alex Pritchard
    I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

    Read the article

  • No access to Windows 2003 admin shares

    - by ARomo
    This is the environment: Several Win 2003 SP 2 servers and several Win XP SP2 & SP3 clients. All in the same LAN. Firewall is disabled everywhere. No recent Windows updates or configuration changes. This is the problem: Since last Thursday, I log on to any other server or workstation as any regular (non-admin) user and I fail to be able to open ADMIN SHARES ONLY (namely \\server1\c$, \\server1\e$ and \\server1\admin$). The error message is: "\server1\c$ is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Multiple connections to a server or shared resource by the same user, using more than one user name, are not allowed. Disconnect all previous connections to the server or shared resource and try again." I can, however, open the same shares if I use FQDN or IP address: \\server1.domain.local\c$ \\172.0.0.1\c$ Other shares do not have this issue and I can open them without any issue. Any ideas or suggestion would be truly appreciated. Thank you in advance.

    Read the article

  • Changes in Access DB are not saved since updating to Windows 7

    - by ytoledano
    Hi I'm working with a program that accesses an MS-Access DB. The problem is that if I open the db file with Access, the values I see aren't the values I see when I'm using the program. For example, There is a table PARAMS with various program variables, one of them is the date I last loaded a certain file. In access it reads April 12th 2010, while in the program it reads May 7th 2010 (this is correct). April 12th is about the time I upgraded the computer to Windows 7. Also, the mdb file sits next to the program executable in C:\Program Files (x86); and I know that Win7 doesn't allow programs to write to the program files dir. So where are the changes saved? What I've tried: I've tried opening the mdb file on another computer - still reads the wrong (old) values I've tried copying the entire program dir to a different folder - now both the program and ms-access read the wrong values. Can someone tell me how to get a version of the DB with all the values up to date with the program? Thanks.

    Read the article

  • Please help me in installing Ubuntu 12.04.1. and Can it run MS Off. Prof. Plus 2007?

    - by ramandeep
    I want to install Ubuntu with MS Office Professional Plus 2007 running. I want to format my hard drive with slow speed as it happens when we install xp. The all cleaning with no traces left. For that what'll be easy to do: 1) Formatting entire hard drive OR 2) Formatting only that partition on which I want to install Ubuntu? I should be sure that I can run MS Office Professional Plus 2007 on Ubuntu. I have ubuntu-12.04.1-desktop-i386.iso burned on a CD and have MS Office Prof. Plus 2007 in this form - http://i.imgur.com/qAhP8.jpg I also want to know when I update Ubuntu how much MB will it be?

    Read the article

  • Is avoiding the private access specifier in PHP justified?

    - by Tifa
    I come from a Java background and I have been working with PHP for almost a year now. I have worked with WordPress, Zend and currently I'm using CakePHP. I was going through Cake's lib and I couldn't help notice that Cake goes a long way avoiding the "private" access specifier. Cake says Try to avoid private methods or variables, though, in favor of protected ones. The latter can be accessed or modified by subclasses, whereas private ones prevent extension or re-use. in this tutorial. Why does Cake overly shun the "private" access specifier while good OO design encourages its use i.e to apply the most restrictive visibility for a class member that is not intended to be part of its exported API? I'm willing to believe that "private" functions are difficult test, but is rest of the convention justified outside Cake? or perhaps it's just a Cake convention of OO design geared towards extensibility at the expense of being a stickler for stringent (or traditional?) OO design?

    Read the article

  • Remote access to internal machine (ssh port-forwarding)

    - by MacUsers
    I have a server (serv05) at work with a public ip, hosting two KVM guests - vtest1 & vtest2 - in two different private network - 192.168.122.0 & 192.168.100.0 - respectively, this way: [root@serv05 ~]# ip -o addr show | grep -w inet 1: lo inet 127.0.0.1/8 scope host lo 2: eth0 inet xxx.xxx.xx.197/24 brd xxx.xxx.xx.255 scope global eth0 4: virbr1 inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr1 6: virbr0 inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 # [root@serv05 ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr1 xxx.xxx.xx.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 169.254.0.0 0.0.0.0 255.255.0.0 U 1002 0 0 eth0 0.0.0.0 xxx.xxx.xx.62 0.0.0.0 UG 0 0 0 eth0 I've also setup IP FORWARDing and Masquerading this way: iptables --table nat --append POSTROUTING --out-interface eth0 -j MASQUERADE iptables --append FORWARD --in-interface virbr0 -j ACCEPT All works up to this point. If I want to remote access vtest1 (or vtest2) first I ssh to serv05 and then from there ssh to vtest1. Is there a way to setup a port forwarding so that vtest1 can be accessed directly from the outside world? This is what I probably need to setup: external_ip (tcp port 4444) -> DNAT -> 192.168.122.50 (tcp port 22) I know it's easily do'able using a SOHO router but can't figure out how can I do that on a Linux box. Any help form you guys?? Cheers!! Update: 1 Now I've made ssh to listen to both of the ports: [root@serv05 ssh]# netstat -tulpn | grep ssh tcp 0 0 xxx.xxx.xx.197:22 0.0.0.0:* LISTEN 5092/sshd tcp 0 0 xxx.xxx.xx.197:4444 0.0.0.0:* LISTEN 5092/sshd and port 4444 is allowed in the iptables rules: [root@serv05 sysconfig]# grep 4444 iptables -A PREROUTING -i eth0 -p tcp -m tcp --dport 4444 -j DNAT --to-destination 192.168.122.50:22 -A INPUT -p tcp -m state --state NEW -m tcp --dport 4444 -j ACCEPT -A FORWARD -i eth0 -p tcp -m tcp --dport 4444 -j ACCEPT But I'm getting connection refused: maci:~ santa$ telnet serv05 4444 Trying xxx.xxx.xx.197... telnet: connect to address xxx.xxx.xx.197: Connection refused telnet: Unable to connect to remote host Any idea what's I'm still missing? Cheers!!

    Read the article

  • How to install ubuntu from desktop w/o internet access?

    - by Tom P.
    I am trying to install ubuntu on a netbook without a CD drive. I first attempted a flash drive, but it did not work, so I decided to use the flash drive to transfer the application that can install from the desktop. However, this is a secondhand school computer that needs its borderline spyware security suite wiped before it can access the internet, so I cannot use the install from desktop application. Do I have any other options? I do have access to an external CD drive that I could try, but I am unconvinced that I would get different results since it would have to go through a USB port. Any and all input is very much appreciated!

    Read the article

  • Access Insert Query

    - by tecno
    Hi, I am using C# to write/read to an Access 2007 Database. The table is ID - AutoNumber [pkey] Fname - Text Lname - Text Address - Text The query string I Use is "Insert into TblMain (Fname,Lname,Address) Values ('"+fname+"','"+lname+"','"+adrs+"')" No errors are returned, the query executes but data is not added to the db. Inserting to table using which does not have an autonumber data column works perfectly. What am I missing?

    Read the article

  • Access database query locks ability to edit table?

    - by Sattvic
    I created a query in Microsoft Access like the one below: SELECT Deliverables.ID, Deliverables.Title, Deliverables.Summary, Deliverables.Header_Code, Deliverables.Header_Code.Value, Deliverables.Sort_order, Deliverables.Pillar, Deliverables.Pillar.Value, Deliverables.Misc_ID FROM Deliverables WHERE (((Deliverables.Pillar.Value)="Link Building")); But my problem is that this query locks my fields and I cannot make changes to the table using the query view. Any suggestions? I am using Microsoft Access 2007

    Read the article

  • Weird call stack when application has frozen

    - by Harriv
    I apparently have an dead lock problem in one of my applications and started investigating EurekaLog stack traces. Here's one recent: Call Stack Information: -------------------------------------------------------------------------------------------------------------------------------------- |Address |Module |Unit |Class |Procedure/Method |Line | -------------------------------------------------------------------------------------------------------------------------------------- |*Exception Thread: ID=14208; Priority=0; Class=; [Main] | |------------------------------------------------------------------------------------------------------------------------------------| |7C82860C|ntdll.dll | | |KiFastSystemCall | | |7C827D27|ntdll.dll | | |ZwWaitForSingleObject | | |77E61C96|kernel32.dll | | |WaitForSingleObjectEx | | |77E61C88|kernel32.dll | | |WaitForSingleObject | | |77E61C7B|kernel32.dll | | |WaitForSingleObject | | |004151C4|MyApp.exe |sysutils.pas |TMultiReadExclusiveWriteSynchronizer|WaitForWriteSignal |16740[1] | |004151BC|MyApp.exe |sysutils.pas |TMultiReadExclusiveWriteSynchronizer|WaitForWriteSignal |16740[1] | |0041522C|MyApp.exe |sysutils.pas |TMultiReadExclusiveWriteSynchronizer|BeginWrite |16818[57] | |004323FB|MyApp.exe |Classes.pas |TDataModule |Create |11357[1] | |004323C0|MyApp.exe |Classes.pas |TDataModule |Create |11356[0] | |007D744D|MyApp.exe |uRORemoteDataModule.pas |TRORemoteDataModule |Create |163[1] | |007D7434|MyApp.exe |uRORemoteDataModule.pas |TRORemoteDataModule |Create |162[0] | |007DBFAB|MyApp.exe |Sentrol_Impl.pas | |Create_Sentrol |85[1] | |00646952|MyApp.exe |uROServer.pas |TROInvoker |CustomHandleMessage |726[11] | |00407BFA|MyApp.exe |system.pas |TInterfacedObject |_AddRef |17972[1] | |00404934|MyApp.exe |system.pas |TObject |GetInterface |9003[8] | |00407B1C|MyApp.exe |system.pas | |_IntfClear |17817[1] | |00404966|MyApp.exe |system.pas |TObject |GetInterface |9009[14] | |004048E8|MyApp.exe |system.pas |TObject |GetInterface |8995[0] | |00407BD7|MyApp.exe |system.pas |TInterfacedObject |QueryInterface |17964[1] | |77E61680|kernel32.dll | | |InterlockedDecrement | | |00407C10|MyApp.exe |system.pas |TInterfacedObject |_Release |17977[1] | |00407B2C|MyApp.exe |system.pas | |_IntfClear |17824[8] | |004067DF|MyApp.exe |system.pas | |_FinalizeArray |15233[100]| |00407B1C|MyApp.exe |system.pas | |_IntfClear |17817[1] | |00646577|MyApp.exe |uROServer.pas |TROClassFactoryList |FindClassFactoryByInterfaceName|619[17] | |77E6166C|kernel32.dll | | |InterlockedIncrement | | |00407BFA|MyApp.exe |system.pas |TInterfacedObject |_AddRef |17972[1] | |00646B72|MyApp.exe |uROServer.pas |TROInvoker |HandleMessage |758[1] | |006460C5|MyApp.exe |uROServer.pas | |MainProcessMessage |512[98] | |00645BAC|MyApp.exe |uROServer.pas | |MainProcessMessage |414[0] | |00647184|MyApp.exe |uROServer.pas |TROMessageDispatcher |ProcessMessage |929[2] | |00647130|MyApp.exe |uROServer.pas |TROMessageDispatcher |ProcessMessage |927[0] | |00647BCF|MyApp.exe |uROServer.pas |TROServer |IntDispatchMessage |1328[27] | |00647ABC|MyApp.exe |uROServer.pas |TROServer |IntDispatchMessage |1301[0] | |0064782F|MyApp.exe |uROServer.pas |TROServer |DispatchMessage |1170[11] | |006477B4|MyApp.exe |uROServer.pas |TROServer |DispatchMessage |1159[0] | |006477A9|MyApp.exe |uROServer.pas |TROServer |DispatchMessage |1152[1] | |0064779C|MyApp.exe |uROServer.pas |TROServer |DispatchMessage |1151[0] | |00659CB6|MyApp.exe |uROLocalServer.pas |TROLocalServer |SendRequest |57[1] | |00659CA4|MyApp.exe |uROLocalServer.pas |TROLocalServer |SendRequest |56[0] | |0065A009|MyApp.exe |uROLocalChannel.pas |TROLocalChannel |IntDispatch |99[10] | |005EE540|MyApp.exe |uROClient.pas |TROTransportChannel |Dispatch |1884[36] | |005EE3FC|MyApp.exe |uROClient.pas |TROTransportChannel |Dispatch |1848[0] | |005EEC8F|MyApp.exe |uROClient.pas |TROTransportChannel |Dispatch |2134[27] | |00616EC8|MyApp.exe |PCCS_Intf.pas |TSentrol_Proxy |GetNewValues |6585[7] | |007CBDB9|MyApp.exe |ETAROConnectionForm.pas |TROConnectionForm |SyncSentrolUpdateTimerTimer |855[16] | |7C82ABE5|ntdll.dll | | |RtlTimeToTimeFields | | |004D5D9C|MyApp.exe |Controls.pas |TControl |WndProc |5063[0] | |004DA05B|MyApp.exe |Controls.pas |TWinControl |WndProc |7304[111] | |7C81A3AB|ntdll.dll | | |RtlLeaveCriticalSection | | |0042659C|MyApp.exe |Classes.pas |TThreadList |UnlockList |3359[1] | |00426598|MyApp.exe |Classes.pas |TThreadList |UnlockList |3359[1] | |004935BC|MyApp.exe |Graphics.pas | |FreeMemoryContexts |5060[12] | |00493524|MyApp.exe |Graphics.pas | |FreeMemoryContexts |5048[0] | |004D9799|MyApp.exe |Controls.pas |TWinControl |MainWndProc |7076[6] | |004329F4|MyApp.exe |Classes.pas | |StdWndProc |11583[8] | |7739C09A|USER32.dll | | |CallNextHookEx | | |004B1343|MyApp.exe |ExtCtrls.pas |TTimer |Timer |2281[1] | |00404A30|MyApp.exe |system.pas | |_CallDynaInst |9159[1] | |004B1227|MyApp.exe |ExtCtrls.pas |TTimer |WndProc |2239[4] | |004329F4|MyApp.exe |Classes.pas | |StdWndProc |11583[8] | |7739C42C|USER32.dll | | |GetParent | | |7739C45C|USER32.dll | | |GetParent | | |773A16E0|USER32.dll | | |DispatchMessageA | | |773A16D6|USER32.dll | | |DispatchMessageA | | |004CC234|MyApp.exe |Forms.pas |TApplication |ProcessMessage |8105[23] | |004CC138|MyApp.exe |Forms.pas |TApplication |ProcessMessage |8082[0] | |004CC26E|MyApp.exe |Forms.pas |TApplication |HandleMessage |8124[1] | |004CC264|MyApp.exe |Forms.pas |TApplication |HandleMessage |8123[0] | |004CC563|MyApp.exe |Forms.pas |TApplication |Run |8223[20] | |004CC4B0|MyApp.exe |Forms.pas |TApplication |Run |8203[0] | |007F18B3|MyApp.exe |MyApp.dpr | | |215[65] | The stack trace seems to be ok until first TTimer call, after that it contains some garbage(?), however the end contains the the lock which seems be holding the main thread. Can I trust this stack trace? If not, what can cause this and how I can avoid it? Any ideas about the dead lock based on this stack trace? I don't quite understand how creating a datamodule can dead lock.. I'm using Delphi 2007.

    Read the article

  • Requiring SSH-key Login Via PAM From Specific IP Ranges

    - by Sean M
    I need to be able to access my server (Ubuntu 8.04 LTS) from remote sites, but I'd like to worry a bit less about password complexity. Thus, I'd like to require that SSH keys be used for login instead of name/password. However, I still have a lot to learn about security, and having already badly broken a test box when I was trying to set this up, I'm acutely aware of the chance of screwing myself while trying to accomplish this. So I have a second goal: I'd like to require that certain IP ranges (e.g. 10.0.0.0/8) may log in with name/password, but everyone else must use an SSH key to log in. How can I satisfy both of these goals? There already exists a very similar question here, but I can't quite figure out how to get to what I want from that information. Current tactic: reading through the PAM documentation (pam_access looks promising) and looking at /etc/ssh/sshd_config.

    Read the article

  • can't access SATA card config screen on boot, nor access the disks

    - by Ronald
    We've just upgraded our file server using an ASUS P6T WS Pro board, running FreeBSD-RELEASE 8.2 and using zfs to manage 12 WD20EARS disks. Since our 3ware card has been giving us trouble we started using the six on-board SATA connectors and got a SuperMicro USAS2-L8i to provide eight more ports. Mechanically, the card is an awkward fit but electrically it all seems ok. Upon boot, the LSI controller shows up and states that pressing ctrl-c will bring up the LSI Config Utility. When doing that, the message changes to state that the utility will be started after initialization, however that never happens. There does seem to be an error message that's only displayed too briefly to read and seems to be about PCI and "not enough space". (That message is pushed off by a hardware summary and I've found no way to scroll back at this point.) The disks do not show up in any recognizable ways after booting, either. I found a hint in another discussion to check the address mapping on either the card or the motherboard BIOS, but have found no way to do that. So what I tried on a hunch is to disable everything that's on-board, including network adapters, Firewire controller and SATA. In fact, after doing that, I can successfully launch the LSI Config Utility. As far as I can tell, all looks well in there, and when booting in that configuration it also displays a list of the disks connected to it, which looks just fine as well. Only problem now is that I can't boot that way, because I need the on-board SATA controller and network adapters. As soon as I re-enable any of them I'm back to square one. That discussion I mentioned about mapping addresses said to try D000, then D7FF, then DFFF, in order. The LSI Config Utility shows the card address as D000 but offers no way of changing it. Any tips or insights would be appreciated.

    Read the article

  • Excel Macro Runtime error 428 in Excel 2003

    - by Adam
    Hi I have created a xlt excel template which works fine in Excel 2007 under compatibility mode and shows no errors on compatibility check. The template runs a number of Macros which creates pivot tables and charts. When a colleague tries to run the same xlt on excel 2003 they get a Runtime error 428 (Object does not support this property or method). The runtime error fails at this point; ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Any help would be appreciated. This is the full Macro; Sub Auto_Open() ' ' ImportData Macro ' Macro to import data, Data must be in your local D: Drive and named raw.csv ' ' Sheets("raw").Select With ActiveSheet.QueryTables.Add(Connection:= _ "TEXT;d:\raw.csv", Destination:=Range _ ("$A$1")) .Name = "raw_1" .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False .PreserveFormatting = True .RefreshOnFileOpen = False .RefreshStyle = xlInsertDeleteCells .SavePassword = False .SaveData = True .AdjustColumnWidth = True .RefreshPeriod = 0 .TextFilePromptOnRefresh = False .TextFilePlatform = 850 .TextFileStartRow = 1 .TextFileParseType = xlDelimited .TextFileTextQualifier = xlTextQualifierDoubleQuote .TextFileConsecutiveDelimiter = False .TextFileTabDelimiter = False .TextFileSemicolonDelimiter = False .TextFileCommaDelimiter = True .TextFileSpaceDelimiter = False .TextFileColumnDataTypes = Array(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, _ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) .TextFileTrailingMinusNumbers = True .Refresh BackgroundQuery:=False End With ' ' AddMonthColumn Macro ' ' Sheets("raw").Select Range("AK1").Select ActiveCell.FormulaR1C1 = "Month" Range("AK2").FormulaR1C1 = "=DATE(YEAR(RC[-36]),MONTH(RC[-36]),1)" LastRow = ActiveSheet.UsedRange.Rows.Count Range("AK2").AutoFill Destination:=Range("AK2:AK" & LastRow) Columns("AK:AK").EntireColumn.AutoFit Columns("AK:AK").Select Selection.NumberFormat = "mmmm" With Selection .HorizontalAlignment = xlCenter End With Columns("AK:AK").EntireColumn.AutoFit Selection.Copy Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ' ' Add Report Information [Text] ' Sheets("Frontpage").Select Range("A2:N2").Select Selection.Merge ActiveCell.FormulaR1C1 = "Service Activity Report" With Selection.Font .Size = 20 End With Range("A3:N3").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Customer Name") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With Range("A4:N4").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Date Range dd/mm/yyyy - dd/mm/yyyy") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With ' ' IncidentsbyPriority Macro ' ' Sheets("Frontpage").Select Range("A7").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(7, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$7:$H$22") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable2").PivotFields("Priority") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable2").AddDataField ActiveSheet.PivotTables( _ "PivotTable2").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentsbyPriority" ActiveChart.ChartTitle.Text = "Incidents by Priority" Dim RngToCover As Range Dim ChtOb As ChartObject Set RngToCover = ActiveSheet.Range("D7:L16") Set ChtOb = ActiveSheet.ChartObjects("IncidentsbyPriority") ChtOb.Height = RngToCover.Height ' resize ChtOb.Width = RngToCover.Width ' resize ChtOb.Top = RngToCover.Top ' reposition ChtOb.Left = RngToCover.Left ' reposition ' ' IncidentbyMonth Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R18C1", TableName:="PivotTable4", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(18, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$18:$H$38") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable4").PivotFields("Month") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _ "PivotTable4").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyMonth" ActiveChart.ChartTitle.Text = "Incidents by Month" Dim RngToCover2 As Range Dim ChtOb2 As ChartObject Set RngToCover2 = ActiveSheet.Range("D18:L30") Set ChtOb2 = ActiveSheet.ChartObjects("IncidentbyMonth") ChtOb2.Height = RngToCover2.Height ' resize ChtOb2.Width = RngToCover2.Width ' resize ChtOb2.Top = RngToCover2.Top ' reposition ChtOb2.Left = RngToCover2.Left ' reposition ' ' IncidentbyCategory Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R38C1", TableName:="PivotTable6", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(38, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$38:$H$119") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 2") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 3") .Orientation = xlPageField .Position = 1 End With ActiveSheet.PivotTables("PivotTable6").AddDataField ActiveSheet.PivotTables( _ "PivotTable6").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyCategory" ActiveChart.ChartTitle.Text = "Incidents by Category" Dim RngToCover3 As Range Dim ChtOb3 As ChartObject Set RngToCover3 = ActiveSheet.Range("D38:L56") Set ChtOb3 = ActiveSheet.ChartObjects("IncidentbyCategory") ChtOb3.Height = RngToCover3.Height ' resize ChtOb3.Width = RngToCover3.Width ' resize ChtOb3.Top = RngToCover3.Top ' reposition ChtOb3.Left = RngToCover3.Left ' reposition ' ' IncidentsbySiteandPriority Macro ' ' Sheets("Frontpage").Select Range("A71").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R71C1", TableName:="PivotTable3", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(71, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$71:$H$90") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable3").PivotFields("Site Name") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable3").PivotFields("Priority") .Orientation = xlColumnField .Position = 1 End With ActiveSheet.PivotTables("PivotTable3").AddDataField ActiveSheet.PivotTables( _ "PivotTable3").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbySiteandPriority" ' ActiveChart.ChartTitle.Text = "Incidents by Site and Priority" Dim RngToCover4 As Range Dim ChtOb4 As ChartObject Set RngToCover4 = ActiveSheet.Range("H71:O91") Set ChtOb4 = ActiveSheet.ChartObjects("IncidentbySiteandPriority") ChtOb4.Height = RngToCover4.Height ' resize ChtOb4.Width = RngToCover4.Width ' resize ChtOb4.Top = RngToCover4.Top ' reposition ChtOb4.Left = RngToCover4.Left ' reposition Columns("A:G").Select Range("A52").Activate Columns("A:G").EntireColumn.AutoFit End Sub

    Read the article

  • How to compare 2 similar strings letter by letter and highlight the differences?

    - by PowerUser
    We have 2 databases that should have matching tables. I have an (In-Production) report that compares these fields and displays them to the user in an MS-Access form (continuous form style) for correction. This is all well and good except it can be difficult to find the differences. How can I format these fields to bold/italicize/color the differences? "The lazy dog jumped over a brown fox." "The lazy dog jumped over the brown fox." (It's easier to see the differences between 2 similiar text fields once they are highlighted in some way) "The lazy dog jumped over a brown fox." "The lazy dog jumped over the brown fox. " Since we're talking about a form in MS Access, I don't have high hopes. But I know I'm not the first person to have this problem. Suggestions?

    Read the article

  • MDE Access decrypt JDBC

    - by michelemarcon
    I want to perform JDBC SQL queries on a MDE Access file. I've set up the data source ODBC and everything worked well for a MDE file. Now, I'm working with a newer version of the MDE file, and here is the result: java.sql.SQLException: [Microsoft][Driver ODBC Microsoft Access] Cannont read record. Read authorization unavailable for "tbl_mytable". If I open the MDE with Access Runtime I am asked for a password, and after leaving a blank password I can see all the data. Of course, "tbl_mytable" does exist inside the database.

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >