Search Results

Search found 4834 results on 194 pages for 'nsswitch conf'.

Page 95/194 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Module loaded even though it's blacklisted

  - by isakkarlsson

  System: Ubuntu 11.10 Linux gray 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:50:42 UTC 2011 i686 i686 i386 GNU/Linux I'm trying to blacklist a module (rt2800usb among other) like; $ lsmod | grep rt rt2800usb 22300 0 rt2800lib 48717 1 rt2800usb crc_ccitt 12595 1 rt2800lib rt2x00usb 20092 1 rt2800usb rt2x00lib 48114 3 rt2800usb,rt2800lib,rt2x00usb mac80211 272785 3 rt2800lib,rt2x00usb,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 $ emacs /etc/modprobe.d/blacklist.conf and add: blacklist rt2800usb blacklist rt2800lib blacklist rt2x00usb blacklist rt2x00lib and then: $ sudo update-initramfs -u $ sudo reboot But the module are loaded after reboot: $ lsmod | grep rt rt2800usb 22300 0 rt2800lib 48717 1 rt2800usb crc_ccitt 12595 1 rt2800lib rt2x00usb 20092 1 rt2800usb rt2x00lib 48114 3 rt2800usb,rt2800lib,rt2x00usb mac80211 272785 3 rt2800lib,rt2x00usb,rt2x00lib cfg80211 172392 2 rt2x00lib,mac80211 How do I make the changes persist (i.e. have the modules blacklisted) after reboot?

  Read the article

• I have two versions of glib on my system, and I don't know how to remove the old one

  - by Dameentsia

  While trying to compile a program (pygobject), running ./configure I am told that I don't have glib. So, I download the tarball and compile and install, no problems. now when I try to ./configure the package again, I get the following error: checking for GLIB - version >= 2.24.0... *** 'pkg-config --modversion glib-2.0' returned 2.34.2, but GLIB (2.34.0) *** was found! If pkg-config was correct, then it is best *** to remove the old version of GLib. You may also be able to fix the error *** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing *** /etc/ld.so.conf. Make sure you have run ldconfig if that is *** required on your system. *** If pkg-config was wrong, set the environment variable PKG_CONFIG_PATH *** to point to the correct configuration files no configure: error: maybe you want the pygobject-2-4 branch? Here is the entire prompt: http://pastebin.com/raw.php?i=Gs6MrTWh

  Read the article

• Unity greeter background on Xubuntu 12.04

  - by user67594

  I'm running Xubuntu 12.04 and using the Unity greeter with LightDM. Everything works well except for I can never change the background. I've tried editing the .conf file, editing the gsettings as the lightdm user, even compiling an override file for com.canonical.unity-greeter. All of these fail, and I end with a dark purple background. I was able to get rid of the grid using gsettings, but that's about it. I've enabled switching user backgrounds, but that never works. I'm wondering whether this is Xfce/Xubuntu specific, or a bug.

  Read the article

• Wired internet speed is slow in Ubuntu 12.04

  - by RameshKatkam

  I have dual boot Windows 7 and Ubuntu 12.04 on my Dell N4110 laptop. I recently installed Ubuntu 12.04 on my existing windows 7 hard drive. I am experiencing very slow internet speed on Ubuntu(wired connection). But on Windows,internet is really fast. I disabled ipv6 by editing /etc/sysctl.conf No avail. Then i run the following command. sudo ethtool -s eth0 speed 100 duplex full autoneg off No benefit. I am having "Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05)" network card.

  Read the article

• An error has occurred when creating debian packaging

  - by Clepto

  i execute quickly share and i get Launchpad connection is ok ........ Command returned some WARNINGS: ---------------------------------- WARNING: the following files are not recognized by DistUtilsExtra.auto: mangar/.bzr/README mangar/.bzr/branch-format mangar/.bzr/branch/branch.conf mangar/.bzr/branch/format mangar/.bzr/branch/last-revision mangar/.bzr/branch/tags mangar/.bzr/checkout/conflicts mangar/.bzr/checkout/dirstate mangar/.bzr/checkout/format mangar/.bzr/checkout/views mangar/.bzr/repository/format mangar/.bzr/repository/pack-names ---------------------------------- An error has occurred when creating debian packaging ERROR: can't create or update ubuntu package ERROR: share command failed Aborting the previous time i run the command everything worked! the previous time i was using ubuntu but now i am using linux mint 13... i get the same error with quickly package! i need to package my app for the contest.. edit: now i get this too ---------------------------------- ERROR: Python module helpers not found ERROR: Python module Window not found ERROR: Python module mangarconfig not found ERROR: Python module Builder not found those files exist in the package_lib folder, why it cannot find them?

  Read the article

• KVM switching from lower resolution system resets Ubuntu high resolution

  - by Ed Manet

  I'm running 12.04 desktop on my main desktop and it's hooked to a KVM (IOGear miniview) that shares the peripherals with a SLES 11 machine. The SLES 11 machine can't get the same resolution as the Ubuntu machine because of different graphics hardware. If I switch from Ubuntu to SLES and stay there too long, when I switch back to Ubuntu the screen resolution on Ubuntu is reset to the same as SLES. I can get it back easily just opening the Displays configuration; it immediately resets to the high resolution as soon as the Displays window opens. But all my open windows have been maximized and it's a P.I.T.A. having to resize them all again. How do I get it to just stay at the high resolution between switching between systems? Is there a setting in the Xorg conf file I need to set?

  Read the article

• Getting vga_switcheroo with ATI Mobility Radeon 5650 HD to work

  - by stevejb

  Hello! I have a new HP dv7 laptop with ATI Mobility Radeon HD 5650 graphics card, and also Intel graphics (switchable). I have done the following and want to understand what is going on with my graphics driver Resized windows 7 and did fresh install of 10.10 Booted into 10.10 and things seemed to be working okay Enabled ATI graphics, and was clearly working on the ATI rather than Intel GPU (desktop cube worked) Rebooted, got an error that modprobe could not load modules.dep, and also something about i915 symbols Rebooted into recovery mode, modified xorg.conf to remove the mention of fglrx Rebooted, and the errors show, but then x starts but clearly in intel graphics I would ideally like to be able to switch between the ATI and Intel graphics, a la vga_switcheroo. My first problem seems to be that the folder /sys/kernel/debug/vgaswitcheroo does not exist, hinting at some kind of kernel issue. What can I do to get this available? Thanks!

  Read the article

• Repacked proprietary software keeps updating the same deb

  - by Johannes

  I repacked a proprietary program delivered as tar file to a deb file for having a company wide repository. I used reprepro to set up a repository and signed it. A unix timestamp is faking a versioning numbering, so I can have different (real) versions installed at the same time. Almost everything works as expected. The deb file looks like this: mysoft8.0v6_1366455181_amd64.deb Only problem on a client machine it tries to install the same deb file over and over again because it thinks its an update. What do I miss: control file in deb package looks like this: Package: mysoft8.0v6 Version: 1366455181 Section: base Priority: optional Architecture: amd64 Installed-Size: 1272572 Depends: Maintainer: me Description: mysoft 8.0v6 dpkg repackaging and the config in the repository: /mirror/mycompany.inc/conf/distributions: Origin: apt.mycompany.inc Label: apt repository Codename: precise Architectures: amd64 i386 Components: main Description: Mycompany debian/ubuntu package repo SignWith: yes Pull: precise Help much appreciated Added guide: This Is the guide I used to create the repository.

  Read the article

• Multiple Monitors using nvidia-prime or bumblebee on Ubuntu 13.10

  - by user205626

  I've been unable to get multiple monitors to work with Ubuntu 13.10 using nvidia-prime or bumblebee. Could someone point me in the right direction? With nvidia-prime, I've tried the xorg.conf here http://us.download.nvidia.com/XFree86/Linux-x86/319.12/README/randr14.html, but I boot into "low graphics" mode and have to revert to get a desktop back. Any suggestions would be appreciated. Thanks. Edit: I've given up on nvidia-prime; I missed the fact that it never turns off the discrete card... So, I'm back to trying to get VIRTUAL displays working with Bumblebee.

  Read the article

• Network manager indicator missing

  - by Jarmo

  I recently upgraded from 11.10 to 12.04. My first attempt failed, and I received an error stating that not all of the required packages were downloaded. Before (successfully) attempting again, I noticed that there was no longer a networking indicator in the upper panel. The indicator did not reappear with the installation of 12.04. To be clear, my wireless connection has experienced no problems, despite the missing indicator. Here are the solutions that I have found which did not work for me: Editing /etc/NetworkManager/NetworkManager.conf and replacing [ifupdown] managed=false with =true. Reinstalling network-manager (via apt-get install --reinstall). I am currently running 12.04 on an Asus Eee PC 1005 HA, and I am new to seeking solutions through forums, so I apologize if I have neglected to provide some vital information about my hardware.

  Read the article

• Dynamic MMap ran out of room when trying to sudo apt-get anything

  - by user1610406

  I was having an error in Update Manager that asks me to do a partial upgrade and it fails. Now I can't sudo apt-get install anything. I tried to fix it, and now I can't sudo apt-get anything. Every time, I get this output: Reading package lists... Error! E: Dynamic MMap ran out of room. Please increase the size of APT::Cache-Limit. Current value: 25165824. (man 5 apt.conf) E: Error occurred while processing libuptimed0 (NewVersion1) E: Problem with MergeList /var/lib/apt/lists/archive.ubuntu.com_ubuntu_dists_lucid_universe_binary-i386_Packages W: Unable to munmap E: The package lists or status file could not be parsed or opened. I have no idea why this is happening or how to fix it, and I fear that if I try something that probably doesn't work that it will make my problem worse. (Just for reference I am currently running 10.04 (Lucid) on my machine.)

  Read the article

• I have 20 Ubuntu 12.04 LTS machines Some are unable to network with other machines , they all have same workgroup viz. Ubuntu

  - by Gaurang Agrawal

  During installation I updated my workgroup to "Workgroup" , after installation I changed it to ubuntu as I was unable to access computers in network . What changes do I need to make in samba configuration ? I don't know if this is related , shared@shared:~$ testparm Load smb config files from /etc/samba/smb.conf rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384) Processing section "[printers]" Processing section "[print$]" Loaded services file OK. Server role: ROLE_STANDALONE Press enter to see a dump of your service definitions [global] workgroup = UBUNTU server string = %h server (Samba, Ubuntu) encrypt passwords = No map to guest = Bad User obey pam restrictions = Yes pam password change = Yes passwd program = /usr/bin/passwd %u passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully . username map = /etc/samba/smbusers unix password sync = Yes syslog = 0 log file = /var/log/samba/log.%m max log size = 1000 name resolve order = bcast host dns proxy = No usershare allow guests = Yes panic action = /usr/share/samba/panic-action %d idmap config * : backend = tdb [printers] comment = All Printers path = /var/spool/samba create mask = 0700 printable = Yes print ok = Yes browseable = No [print$] comment = Printer Drivers path = /var/lib/samba/printers smbclient -L 192.168.1.108 Enter shared's password: Connection to 192.168.1.108 failed (Error NT_STATUS_HOST_UNREACHABLE)

  Read the article

• Internet connection randomly drops out

  - by Dr_Bunsen

  Since a week or 2, I have this random network failures. No error pops up, the system says it's still connected to the internet(wifi and wired). The problem is, I can't connect to anything, even a ping google.com gives no feedback. And after many network-manager resets it will work again, for just a minute, and drop out again. I noticed that the /etc/resolv.conf contains this line: nameserver 127.0.0.1 I left out the "Do not edit" stuff, and after it worked for a second, this line is added: search lan When I change the nameserver to 8.8.8.8, I am still able to connect to anywhere. Does anyone got a clue what is happening here? I will provide any information asked. Thanks in advance p.s. I run Ubuntu 13.04 since lastnight(24-06-2013)

  Read the article

• Can't set 1280x1024 with Nvidia Geforce 8400 GS

  - by torbengb

  I've just installed 10.04 LTS using the Windows installer. The system hangs during boot; the splash screen is frozen and it accepts neither Ctrl+Alt+F2 nor Ctrl+Alt+Del, only a hard reset. (I'm a linux noob.) When I edit the default Grub boot option to omit quiet splash, it gets to the point saying * setting sensors limit [OK] _ and there it stays. I can only get to the desktop using the Grub recovery boot option, of course with a lower resolution (800x600) but everything else seems to work fine. As I said, this is a new install. The only thing I've done is to use the Update Manager to get everything up to date, and activate the newest Nvidia driver using the "Hardware drivers" window. I had a similar problem when I installed 9.04 a year ago, and at that time posted this question with an answer that worked - this doesn't work with 10.04. Running nvidia-xconfig to create a new xorg.conf didn't fix it either (while in Recovery boot).

  Read the article

• How to adjust TouchPad edge scroll area in Ubuntu?

  - by MikeVB

  I have an Acer Aspire that I have dual booting XP and Ubuntu. On the Windows side, the driver allows you to set how close your finger has to be to the edge of the TouchPad before it goes into scroll mode. In Ubuntu I don't have the option (at least in the GUI) to change the scroll area on the pad. Is there a conf file or other way to change this? I'm constantly getting into the scroll area during normal usage. I would like to leave it on without losing so much pad area to the scroll feature.

  Read the article

• Ubuntu 10.10 netbook Screen Resolution Sony Vaio FS315

  - by Fatos

  Hello, I've just installed ubuntu 10.10 on my laptop its all great but the screen resolution is a bit crap i have it set 1200:800 and when i do xrandr it indicates that the i can have a bigger screen resolution but i dont seem to to be able to increase it more 1200:800 through monitor tool. another interesting thing is that xorg.conf does not exist on the /etc/X11/ is there a way to increase the screen resolution for Sony laptops? The graphics card is Intel Graphics Please help! I didnt think it would be so hard to change the screen resolution

  Read the article

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• can't ping from virtualbox ubuntu server --nat connection

  - by George

  i set up an ubuntu server in virtual box following these and these instructions.My connection worked,also ssh . Then, i signed up in dyndns.com ,i configured the router ,but in the port forward i changed the 2222 port to 80 because it couldn’t forward from 2222.My port is open and accepting connections but i don’t have any more connection from the server in the virtual box. From virtual box settings-network-port forwarding , i use: Host IP :127.0.0.1 , Host port :80 , Guest Port :22 ,Guest IP : its empty. I am not sure if i am using right the address in /etc/network/interfaces , i use 192.168.0.2 and also this address i use for the firewall rules in the router. Also,in the server /etc/resolv.conf i put that address and in /etc/mysql/my.cnf. I can ping that address but nothing more.(of course neither ssh works) Thank you

  Read the article

• Juju bootstrap fails to start network on local environment

  - by Amith KK

  I've followed the instructions at https://juju.ubuntu.com/CharmSchool and rebooted 5 times...... I cant seem to do a juju-bootstrap (local) This is the output: amith@amith-desktop:~$ juju bootstrap 2011-11-24 17:08:05,708 INFO Bootstrapping environment 'local' (type: local)... 2011-11-24 17:08:05,710 INFO Checking for required packages... 2011-11-24 17:08:06,593 INFO Starting networking... error: Failed to start network default error: internal error Child process (dnsmasq --strict-order --bind-interfaces --pid-file=/var/run/libvirt/network/default.pid --conf-file= --except-interface lo --listen-address 192.168.122.1 --dhcp-range 192.168.122.2,192.168.122.254 --dhcp-leasefile=/var/lib/libvirt/dnsmasq/default.leases --dhcp-lease-max=253 --dhcp-no-override) status unexpected: exit status 2 Command '['virsh', 'net-start', 'default']' returned non-zero exit status 1 2011-11-24 17:08:07,217 ERROR Command '['virsh', 'net-start', 'default']' returned non-zero exit status 1 Is there any fix at all?

  Read the article

• How do I configure wvdial to connect using a micromax 353g usb modem?

  - by user72209

  I have Micromax 353g usb modem . M using Ubuntu 11.04... I installed wvdail nd configured wvdial.conf as [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = ATS7=60 S30=0 S0=0 Init4 = AT+CGDCONT=1,"aircelgprs.pr" Password = Aircel Phone = *99***# Modem Type = USB Modem Stupid Mode = 1 Baud = 7200000 New PPD = yes Dial Attempts = 1 Modem = /dev/ttyUSB2 ISDN = 0 Username = aircel aftr commanding wvdial it says --> WvDial: Internet dialer version 1.61 --> Initializing modem. --> Sending: ATZ --> Sending: ATQ0 --> Re-Sending: ATZ --> Modem not responding. unable to connect plz help

  Read the article

• setup dhcp server - "Job failed to start"

  - by jdicarreira

  I have an eth0 and eth1, eth0 has dynamic ip and on eth1 i setup static ip: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.10.0.1 netmask 255.0.0.0 gateway 10.10.0.1 ` and then i setup the "isc-dhcp-server" with the fowling command: INTERFACES="eth1" Finally... I went to this one "dhcpd.conf", with the fowling comand: default-lease-time 650; max-lease-time 79520; option subnet-mask 255.0.0.0; option broadcast-address 10.10.0.255; option routers 10.10.0.2; subnet 10.10.0.0 netmask 255.0.0.0 { range 10.10.0.10 10.10.0.250; } When I try to "sudo /etc/init.d/isc-dhcp-server start", I get "start: Job failed to start" Anyone knows whats wrong? :/

  Read the article

• Configure audio on HP ENVY 4 ultrabook

  - by phodu_insaan

  I want to configure audio for ubuntu 12.04 on my laptop. Currently the audio just does not play. If i try and plug in headphones then somewhere midway to being fully plugged in the audio plays on the headphones, I plug in further and the sound disappears. How do I get this to work? lspci | grep audio Audio device: Intel Corporation Panther Point High Definition Audio Controller My laptop is one the beats edition HP laptops, and the driver for win7 was an IDT HD audio driver. --EDIT-- The output for cat /proc/asound/card0/codec* | grep Codec is Codec: IDT 92HD91BXX Codec: Intel PantherPoint HDMI I need to get both the IDT card to work and the HDMI card to work with my TV. --EDIT-- --EDIT 2-- I have added blacklist snd-usb-audio to the end of the file /etc/modprobe.d/alsa-base.conf Now the sound plays from my laptop speakers only when I plug in a headphones/external speaker. Otherwise no sound. :( Please help getting everything working as it should. --EDIT 2-- Thanks

  Read the article

• How can i make a Multiseat with Xephyr?

  - by Jnts

  i'm trying to make a multiseat with ubuntu, but a cant make this work. I've read a lot of "how to", and the most of then is about to do a multiseat with some distro with GDM2, or KDM. But, i'm using the lightdm of ubuntu. So now i'm trying to make this multiseat with Xephyr that i already used to make a multiseat with the Debian 4 version. But i dont know how to call Xephyr in lightdm.conf. Sorry for my totally crap english.

  Read the article

• /etc/network/interfaces doesn't always take affect

  - by user1221444

  For some reason my eth0 does not have internet on reboot sometimes. I am using a static ip. I can ping my gateway, but I am unable to ping dns servers, or anything out of my network. It seems that when my internet does work(Usually but just restarting enough times), my /etc/resolv.conf has a nameserver in it. It is empty when I have no internet access. I believe something is overwriting my interfaces settings sometimes on boot. Any help would be appreciated. I am running Ubuntu Server 12.04 64bit /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 173.213.192.234 netmask 255.255.255.248 network 173.213.192.232 broadcast 173.213.192.239 gateway 173.213.192.233 dns-nameservers 8.8.8.8 auto eth1 iface eth1 inet static address 10.0.0.106 netmask 255.255.255.0 gateway 10.0.0.1

  Read the article

• How do I rotate my monitor using xorg?

  - by user1106405

  I have just installed KUbuntu 12.10, and I am attempting to rotate my monitor 90 deg to the left. When I add the option to rotate, the monitor seems to ignore the directive. I'm currently using dual 02:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation GF104 [GeForce GTX 460] (rev a1) and NVidia driver version 310 My xorg.conf is as follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 304.51 (buildd@komainu) Fri Oct 12 12:53:49 UTC 2012 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 310.14 ([email protected]) Tue Oct 9 13:04:01 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 1280 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 60.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1908WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:2:0:0" Screen 1 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 460" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x1080 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1200 +0+0; DFP-0: 1920x1200_60 +0+0; DFP-0: 1600x1200 +0+0; DFP-0: 1600x1200_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" Option "Rotate" "left" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection Edit: If I delete the xorg.conf and reboot, I am able to rotate my monitor, however, my third monitor is not recognized: Screen 0: minimum 8 x 8, current 3360 x 1200, maximum 16384 x 16384 DVI-I-0 disconnected (normal left inverted right x axis y axis) DVI-I-1 disconnected (normal left inverted right x axis y axis) DVI-I-2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm 1920x1200 60.0*+ 1600x1200 60.0 1280x1024 60.0 1280x960 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 HDMI-0 disconnected (normal left inverted right x axis y axis) DVI-I-3 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 408mm x 255mm 1440x900 59.9*+ 75.0 1280x1024 75.0 60.0 1280x800 59.8 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 640x480 75.0 72.8 59.9

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >