Search Results

Search found 4834 results on 194 pages for 'nsswitch conf'.

Page 98/194 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• How can I use a CanoScan N640Pex scanner over a USB/parallel cable?

  - by detly

  I have an old CanoScan N640Pex flat bed scanner and a USB-to-parallel port cable through which I can connect it to my PC. Unfortunately neither Simple Scan nor XSane detect the scanner. I'm running Ubuntu 12.04 (plus updates and backports) with kernel 3.2.0-31-generic. dmesg tells me this when I plus the cable in: [256411.641910] usb 7-1: new full-speed USB device number 10 using uhci_hcd [256411.872392] usblp0: USB Bidirectional printer dev 10 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [256411.872417] usbcore: registered new interface driver usblp lsusb shows this device for my cable: Bus 007 Device 010: ID 067b:2305 Prolific Technology, Inc. PL2305 Parallel Port The device node created is /dev/usb/lp0 crw-rw---- 1 root lp 180, 0 Sep 9 17:46 /dev/usb/lp0 There is no extra information from any of these commands when I attach the scanner to the cable and power it on, though. I suspect I might need to change something in /etc/sane.d/canon_pp.conf, but I have no idea what to put for the ieee1284 line, since there is pretty much zero documentation for that parameter. So how can I get it to work?

  Read the article

• How to find and change the screen DPI

  - by Luis Alvarado

  I am trying to find and then change the screen DPI in 12.04 and 12.10 but I can't seem to find any app or config file that can do this. Is there any app or conf file that I can use to change my screen dpi? Note that this is for 12.04+ so the following will not work: How do I change the font DPI settings? How to change the screen DPI in 11.10? Is it possible to change font DPI in 11.04? They are basically changing the font size, not the actual screen DPI

  Read the article

• 14.04 missing "/etc/init.d/ufw"? my firewall never auto starts

  - by Aquarius Power

  I need to know how to fix the missing "/etc/init.d/ufw" file, is it some package or some command? I used the gufw to enable it, but on reboot my firewall was still off... I created a symlink /etc/init.d/ufw -> /lib/init/upstart-job but I could not make it work like start ufw. I found this file /lib/ufw/ufw-init, it looks like a init.d file! can I copy or symlink it there? Additional (optional) questions: How to find what package has that file? apt-cache search didnt work.. Can we safely create such a script? Any idea why is it missing? Obs.: my /etc/ufw/ufw.conf has ENABLED=yes (but seems useless..)

  Read the article

• How to get output from upstart jobs when logged in via SSH?

  - by Binarus

  Hi, at the moment, I am trying to learn upstart and can't get around a basic problem. To monitor what my job definitions are doing, I would like to see text output from the jobs. That does not seem to be possible when I am logged on via SSH. Currently, I am having this problem with Natty 11.04, but I am convinced that it is a more common one. Probably I just don't know about some important, yet very basic, fact. A simple job file I use (filename /etc/init/test.conf): description "test" start on test console owner kill timeout 5 task script /bin/echo Gotcha... end script My goal is to see the text "Gotcha..." when doing "initctl emit test" or "initctl start test". But that does not work. What I have tried so far: "console output" instead of "console owner" "exec /bin/echo Gotcha..." instead of script...end script I am grateful for any advice. Thank you very much, Binarus

  Read the article

• Boots to terminal

  - by Core Xii

  I had a system running 10.04, I think. I upgraded it to 11.04, everything was fine. But then when I upgraded it further to 11.10, the system would only boot to a terminal, no desktop like before. I installed 12.04 on it instead, keeping /home which was on another partition... but it's still booting to terminal. I believe there may be some bad configuration files left over that are causing this. Looking at other similar issues, I looked for /etc/X11/xorg.conf but it doesn't exist. startx says it isn't installed. Installing nvidia-current didn't help (has GF 6600 GT video card). Alt+F7 shows a blank screen. I used the alternate installer, and didn't select any of the optional packages it prompts during installation. Should I have? How do I get it to boot to desktop like normal?

  Read the article

• can rsyslog transfer files present in a directory

  - by Tarun

  I have configured rsyslog and its working fine as its intended to be this is the conf files: Server Side: $template OTHERS,"/rsyslog/test/log/%fromhost-ip%/others-log.log" $template APACHEACCESS,"/rsyslog/test/log/%fromhost-ip%/apache-access.log" $template APACHEERROR,"/rsyslog/test/log/%fromhost-ip%/apache-error.log" if $programname == 'apache-access' then ?APACHEACCESS & ~ if $programname == 'apache-error' then ?APACHEERROR & ~ *.* ?OTHERS Client Side: # Apache default access file: $ModLoad imfile $InputFileName /var/log/apache2/access.log $InputFileTag apache-access: $InputFileStateFile stat-apache-access $InputFileSeverity info $InputRunFileMonitor #Apache default Error file: $ModLoad imfile $InputFileName /var/log/apache2/error.log $InputFileTag apache-error: $InputFileStateFile stat-apache-error $InputFileSeverity error $InputRunFileMonitor if $programname == 'apache-access' then @10.134.125.179:514 & ~ if $programname == 'apache-error' then @10.134.125.179:514 & ~ *.* @10.134.125.179:514 Now in rsyslog can I instead of defining separate files can I give the complete directory so that the client sends all the log files automatically present in the directory /var/log/apache2 and on syslog server side these files gets automatically stored in different filenames?

  Read the article

• How can I remove bluetooth-applet in 11.10?

  - by dunderhead

  I tried adding rfkill block bluetooth to /etc/rc.local. This did not work. I tried adding both blacklist bluetooth and blacklist btusb to etc/modprobe.d/blacklist.conf. This did not work. So I went to Synaptic to remove it altogether, but when I marked bluez for removal it said it was going to also remove gnome-shell as well! So naturally I didn't do that. (Is it sane to run a potential security problem like bluetooth by default? And why is something like that so tightly integrated into Gnome shell?) Can anyone tell me how to get rid of this annoying and unnecessary process?

  Read the article

• Unable to remove network proxy

  - by Rushil

  I'm on 11.10 I'd set up a network proxy a couple of days back from system settings .And afterwards I'd set my proxy method back to none. However, my proxy has not been removed. I know this because: a: 127.0.0.1 routes me to the index.html file in the base directory of the proxy server. b: I'm able to access my university internet after hours. I checked my /etc/environment and etc/apt/apt.conf file and both of them have no proxy details. I also tried resetting the proxy and then getting rid of it but that didn't work either.

  Read the article

• Can't install ATI proprietary drivers in 12.10

  - by EApubs

  I have a laptop with ATI Radeon 6770M HD Hybrid graphics card. In Ubuntu 12.04, I installed the fglrx driver through "additional drivers" and it worked. (I can even switch GPUs). But in the new Ubuntu 12.10, after installing, Unity won't load. Only the mouse and the wallpaper. If I initialize the settings sudo aticonfig --initial then after rebooting it gives a warning saying I'm in low graphics mode! How to fix this? PS : Earlier i used software source to install the drivers. But when using the terminal, I got this warning : update-alternatives: warning: forcing reinstallation of alternative /usr/lib/fglrx/ld.so.conf because link group x86_64-linux-gnu_gl_conf is broken Update : Filed a bug report in launchpad : https://bugs.launchpad.net/fglrx/+bug/1068661

  Read the article

• Cant find one particular wireless network. Worked before, but sudenly stopt working.

  - by Haakon

  My first question here. My problem is: I cant find my wireless network at home. Situation: It worked fine 7 days ago. It works with a cable(wierd). I find the network on my ipad/phone. I can connect to wireless hotspot network form my phone and wireless at my university, and it works fine. I can connect to the network in windows What I have tried: Tried this Strange network issue; works on windows, but not on ubuntu, works on campus wireless, but not at home (removing resolve.conf). Hardware and software: I have a Broadcom card Use dual boot ubuntu 12.04 - windows 7 Things I did to make wireless work: blacklist brcmsmac blacklist bcma blacklist b43 blacklist ssb Can anyone help me? I'm about to kill myself(not literary)!! I'm not that good in linux so go gentle on me:)

  Read the article

• How to fix "The system is running in low-graphics mode" error?

  - by jokerdino

  Note: This is an attempt to create a canonical question that covers all instances of "low-graphics mode" error that occurs to a user, including but not limited to installation of wrong drivers, incorrect or invalid lightdm greeters, low disk space, incorrect installation of graphics card like ATI and Nvidia, incorrect configuration of xorg.conf file while setting up multiple monitors among others. If you are experiencing the "low-graphics mode" error when trying to login but none of the following answers work for you, please do ask a new question and then update the answers of this canonical question as and when your new question gets answered. When I try to boot into my computer, I am getting this error: The system is running in low-graphics mode Your screen, graphics cards, and input device settings could not be detected correctly. You will need to configure these yourself. How do I fix the failsafe X mode and login into my computer? Answer index: The greeter is invalid

  Read the article

• Distorted text in programs

  - by Teneff

  I've installed Ubuntu 11 with gnome and in some point the text in the programs becomes unreadable like this. It's not only the text, but even the desktop background looks awful. I've tried to add section in xorg.conf, but it didn't helped out. Section "Device" Identifier "g33/X3000" Driver "intel" BusID "PCI:0:2:0" Option "ModeDebug" "on" Option "MonitorLayout" "LCD,VGA" Option "DevicePresence" "true" EndSection And this is what the lshw returns about the VGA *-display description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:16 memory:dfe00000-dfe7ffff ioport:8800(size=8) memory:e0000000-efffffff memory:dfe80000-d$

  Read the article

• PowerXpress error with Driver Catalyst. How can I fix it?

  - by J03Bukowski

  I have install Ubuntu 11.10 64bit on my Hp Dv6-3150el. My Notebook has two graphics cards: lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 02) 01:00.0 VGA compatible controller: ATI Technologies Inc Madison [AMD Radeon HD 5000M Series] I tried to install the proprietary graphics drivers ''fglrx'' available in "Additional Drivers", which does not give me 3D graphics acceleration (and I can't install those post-release). Then I can try to download and install from the website (I tried the version that Catalyst 11.8 11.12). The installation goes perfectly (I followed this guide and others), except that when I configure Xorg.conf file: sudo aticonfig --initial PowerXpress error: Cannot stat '/usr/lib64/fglrx': No such file or directory Failed to initialize libglx for discrete GPU

  Read the article

• Run a script with user interaction on log out / shutdown?

  - by lumbric

  I'd like to run a script on shut down, which interrupts the logout process and and pops up a window with zenity. My target is to get autofsck working with lightdm. It seems to work with 12.04 after installing the old *.deb file, if one runs the check script manually. In order to use it, it should run automatically on log out and ask the user if she/he wants to check the disc on shutdown. There is the option session-cleanup-script in the file /etc/lightdm/lightdm.conf which seems to work, if a bash file with full path is used (I can't place the command directly there). But if I press shutdown, there is no time for a user choice. Is there any other option to solve this problem?

  Read the article

• How do I set a custom resolution in 12.04 with a nVidia video card (9600 GSO)?

  - by Aaron Agarunov

  I have 32 bit 12.04 and my video card drivers are up to date at "304.64" yet my resolution appears capped at 1920x1080. I am trying to get the resolution to 2560x1440 or even higher, as I am running this machine on a 42" LCD through HDMI and the 1920x1080 resolution will not stretch to fit the screen and is therefore fairly zoomed in. The 9600 GSO supports up to 2560x1600, so this should be no problem for the card itself. I have tried using xrandr, which successfully creates the 2560x1440 60 hertz mode but does not allow me to --addmode or --output it in. I have tried working with the xorg.conf, but I actually can not find a way to create the file since when I try to, I am given an error message stating that the # of monitors I have does not match the # of screens I have. Can anyone provide some help or insight?

  Read the article

• Forwarding data between two interfaces

  - by user84471

  I installed Ubuntu server 12.04 after that I installed dhcp3-server and configured it like this: At isc-dhcp-server INTERFACES="eth0" And in dhcpd.conf # A slightly different configuration for an internal subnet. subnet 192.168.1.0 netmask 255.255.255.0 { range 192.168.1.5 192.168.1.100; option domain-name-servers 192.168.1.1; option domain-name "nazwa.local"; option routers 192.168.1.1; option broadcast-address 192.168.1.255; default-lease-time 600; max-lease-time 7200; } Also I have two eth interfaces: # second netowrk interface auto eth0 iface eth0 inet static address 192.168.1.1 netmask 255.255.255.0 # The primary network interface auto eth1 iface eth1 inet dhcp When I plug computer to eth0 I get propertly ip adress but I can't visit any sites. I do even this: echo 1 > /proc/sys/net/ipv4/ip_forward

  Read the article

• How do I move (copy) my entire Ubuntu system to a different hard disk?

  - by boywithaxe

  The HDD I have my Ubuntu installed is about to fail. I would rather not lose 3 years worth of data, customisation and apps. I am looking for a way to move the complete system (SWAP included, because I'm not sure if I can relink the system to a new SWAP partition) to another HDD. But not the complete HDD< only the partition containing Ubuntu, to a partition on a different HDD. Basically I'd like to do what I've been able to do with Norton Ghost for my Windows install. I thought about using Clonezilla but I think I would have issues with GRUB (Especially trying to boot from a different UUID than what is in the conf file). do you know of any way this could be done? PS, my home directory is encrypted but that's not really an issue, because I can work around that. EDIT: changed the explanation to make it clearer

  Read the article

• Cannot make NVIDIA driver work with Ubuntu 12.10

  - by user1293231

  I seem to have a problem similar to many but I didn't manage to get it solved: have a Lenovo N581 with an NVIDIA GeForce 610M have just installed a fresh Ubuntu 12.10 64 bits, + KDE and am trying to have my NVIDIA card work. Have tried all workarounds posted: purge nvidia, install kernel source/headers and then reinstall nvidia-current-updates (or just nvidia-current), do "sudo nvidia-xconfig". It does create a xorg.conf but does not much (no Module Section by the way). The result is that my system (jokey) tells me that the driver is there but not in use and I only get a 640x480 resolution. If I try to launch nvidia-settings it does indeed tell me that the nvidia driver is not used. I do all this under kde but I guess it does matter at this stage. Any hint of how to resolve this? I feel stuck and cannot use any of the acceleration which is partly why I got that laptop in the first place... thanks for any help/advise you may provide!

  Read the article

• My hardware MAC address is always 00:00:00:00:00:00 until I manually update 'eth0'. How can I fix this?

  - by user57184

  I am using Ubuntu 12.04. I use a wired connection. My network MAC address shows as 00:00:00:00:00:00. When I enter the commands below into a terminal window, it starts working again. sudo ifconfig eth0 down sudo ifconfig eth0 hw ether my mac address sudo ifconfig eth0 up I have to enter these commands every time I want to use the Internet. How can I fix this? Update copied from comment The contents of my /etc/NetworkManager/NetworkManager.conf file is: [main] plugins=ifupdown,keyfile dns=dnsmasq no-auto-default=00:00:00:00:00:00, [ifupdown] managed=false

  Read the article

• How to tweak the appearance of desktop icons in Lubuntu?

  - by vasa1

  In Ubuntu 11.10 with Nautilus it was possible to tweak the appearance of desktop icons by editing nautilus.css as I had posted in How can I change the text colour on my desktop icons?. In Xubuntu the same can be done by adding a few lines to one's .gtkrc-2.0 as described in How to highlight items on Desktop using xfce?. In both cases, it is possible to assign colors to the various icon states (such as normal, selected and active). My question is this: is it possible to do the same in Lubuntu? PCManFM seems to be responsible but I can't find any GUI or files to edit for the purpose. The default ~/.config/pcmanfm/lubuntu/pcmanfm.conf doesn't have any relevant settings.

  Read the article

• How to limit concurrent file access on a Samba share?

  - by JPbuntu

  I have a Ubuntu 12.04 file server running Samba. There are 6 windows machines that access the server, as well as two people that will occasionally access files remotely. The problem that I am having is that the CAD/CAM software we are using doesn't seem to request file locks, meaning if two people open a file at the same time, the first person to close the file will get their changes overwritten if the second person saves the file. I tried changing the smb.conf to strict locking = yes but this doesn't seem to have any effect. File locking with excel seems to work fine, so I know that Samba is using the file locks...if they were put on the file in the first place. Is there a way (either in Samba or Ubuntu) to only allow one user to have a file open at a time? If not does anyone have any suggestions for managing a problem like this?

  Read the article

• How to get my localhost with a different directory to my index working)?

  - by blade19899

  I can't get my apache configuration to open my index.html I edited my /etc/apache2/apache2.conf and added the following at the bottom. <VirtualHost *:80> DocumentRoot /media//DATA/directory/to/my/index-file/ ServerName host-test.com </VirtualHost> Then I restarted my entire pc, but when I open localhost I get the: It works! This is the default web page for this server. The web server software is running but no content has been added, yet. Page and not the code written in my index.html? How to get my localhost with a different directory to my index working in Ubuntu 12.10(amd64)?

  Read the article

• Ubuntu 11.10 problem with Nvidia

  - by dariush

  I have an acer with a Gforce graphics card. I installed ubuntu 11.10 and it was working properly until I installed Nvidia drivers via additional drivers, I hit "nvidia-xconfig" in terminal and then reboot. At startup lightdm fails to start. I changed /etc/X11/xorg.conf file back to default and reboot. It works properly, but with the default Ubuntu driver. I want to reconfigure Nvidia and use it. Can anyone tell me what should I do?

  Read the article

• Automatic login option is missing in 12.04

  - by grossogrossum

  Automatic login option is missing from System Settings User Accounts, how can I solve this? I either can't set the automatic login by editing /etc/lightdm/lightdm.conf [SeatDefaults] autologin-user=x autologin-user-timeout=0 user-session=ubuntu greeter-session=unity-greeter After restart login screen asks for my password. There is a thread in Ubuntu forums http://ubuntuforums.org/showthread.php?p=11889259 . It's in lubuntu forum, but there are ubuntu users afected too. I'm runing 12.04 (precise) 64-bit with Kernel Linux 3.2.0-24-generic. Excuse my bad english, please.

  Read the article

• How do I reset my display settings from the command line?

  - by Trevor

  I'm running 12.10 on a dell e5400 laptop and I used xrandr to get the dual monitors working that I connect through a laptop dock. I used xrandr again to switch back to the laptop display when I undocked. The problem is, after a restart, the laptop seems to want to come back up with the dual monitor configuration and the laptop screen stays blank. I can boot into single user mode but I'm not sure what to do from there to get the display settings reset. Any ideas? There's no xorg.conf file so I'm not sure where the settings are stored anymore. Thanks.

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >