Search Results

Search found 3489 results on 140 pages for 'tcp'.

Page 95/140 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Changing Internet connection on ISA Server 2000

  - by garyb32234234

  Hi We are getting a new internet connection installed and will need to unplug the old one and connect this to our ISA Server 2000. Will this be a simple swap out job? We will be given a new ip, which i know i will have to enter into the external network card TCP/IP page. I will also be given the default gateway to enter. The ISP engineer said we may have to reset the ARP? cache, if we dont know how we will have to reset the ISA server? Has anyone any experience? The current connection is with the same ISP but it was owned by the business park were we are located and they linked up an ethernet port to what i assume is their own router. Hope you can help, i know that ISA 2000 is somewhat less easy to use than the newer versions.

  Read the article

• Snow Leopard crashes my Xerox printer

  - by Ho Li Cow

  Just set up 2 brand new iMac 21.5" with OS X 10.6.2 pre-installed in our office. Now whenever we try to print an e-mail out, it re-sets the printer i.e. it switches off, does a POST and prints out a Printer Config page. I can print web pages and from other apps fine, just Apple Mail seems to be suffering. Printer is a Xerox Phaser 7750. I downloaded the drivers it recommended when i first tried printing which didn't help and then also tried downloading from the Xerox site. The latter seemed to install fine but then right at the end, it would say 'Installation Successful', then ask me to choose a printer (it found it fine, both by Bonjour and Raw TCP - i tried both) and then it would give an error message. Any help appreciated.

  Read the article

• Cannot access to any Windows share including localhost

  - by user21936

  I can't access any share from my operating system, including \\localhost and \\127.0.0.1. I have Windows 7. NetBIOS over IP is enabled, other computers in the network can access my shares and other computer's shares, but my operating system cannot access any share. I have installed Windows XP within VMware, and the virtual Windows XP can access all shares including the host shares. I can communicate in other ways like TCP, HTTP and gaming, but not access shares. How to solve this problem?

  Read the article

• UDP Reverse Proxy

  - by user180195

  I have found a way to make reverse-proxy to an external IP. Here is how someone making a request will see it's request being passed: Clients sends request Request reaches the Datacenter one in some place That datacenter, acting as a reverse proxy will redirect the same exact request to another datacenter. The datacenter will then process the request Although, this only works with TCP/HTTP (Looking currently at HaProxy). I am hosting game servers at the other datacenter (where the proxy is not) that are using UDP protocol. Do you know how can I setup a reverse proxy using the UDP protocol.

  Read the article

• what are security implications of running Ubuntu inside Windows 7?

  - by EndangeringSpecies

  I am thinking of switching to Ubuntu as a way of making web browsing more secure. So, suppose I will go the easy route and run Ubuntu as an app inside Windows and then run Firefox inside of that. What will this do to the security given the current threat environment? E.g. do most online threats nowadays target the browser and flash (which presumably would be safely sandboxed inside easy to wipe Ubuntu environment) or do they target the Windows TCP-IP stack where Ubuntu would give no protection? Well, most likely the above question does not come near to covering all the security implications of this setup :-), so please do discuss whatever other issues that may be relevant here.

  Read the article

• Port forwarding not working?

  - by rphello101

  I'm trying to set up an Apache Server to be accessed publicly. I'm using a Netgear R4500 router hooked up to a Motorola SB6121 modem. I can access my server on my computer by typing in my IP address. After following the instructions to forward port 80 so I can access the server from other computers, it does not work (see image). I get "This webpage is not available". I am forwarding to the IP address of my computer. Using this Network Port Scanner Tool, it says "80/tcp filtered http", which, as I understand it, means forwarding did not work correctly. In my Apache httpd file, I have: ServerName 192.168.1.13:80 and Listen 192.168.1.13:80 Anyone know what's wrong or have something I can try? click to enlarge

  Read the article

• how're routing tables populated?

  - by Robbie Mckennie

  i've been reading "tcp/ip illustrated" and i started reading about ip forwarding. all about how you can receive a datagram and work out where to send it next based on the desination ip and your routing table. but what confused me is how (in a home network setting) the table itself is populated. is there a lower layer protocol at work here? does it come along with dhcp? or is it simply based on the ip address and netmask of each interface? i do know (from other books) that in the early days of ethernet one had to set up routing tables by hand, but i know i didn't do that.

  Read the article

• Does a bad Internet connection increase bandwidth usage?

  - by Synetech

  My (Rogers) cable connection has been pretty bad recently (channels 3 and 10 are particularly fuzzy—it’s analog, not digital cable). Not surprisingly, this has caused my cable modem to drop out and have to reestablish a connection a couple of times since it started. The poor connection of course means higher corruption (not necessarily dropped per se) which causes the TCP/IP stack to have to retransmit packets more often. Reduction of bandwidth throughput aside, I got to wondering if it increases the actual bandwidth usage. That is, if there is a high error rate on the line causing packets to have to be retransmitted: Does this increase a bandwidth monitoring program’s numbers? Does the ISP count the retransmitted packets toward the monthly cap? Based on what I remember from my university networking courses and common sense, I have a feeling that the answer to both questions is yes, but I cannot reliably measure the first, and have no authoritative answer for the second. I’m wondering if maybe the retransmitted packets are acknowledged as being duplicates and thus not counted somewhere along the line.

  Read the article

• What's the situation that requires stateful firewall?

  - by Eonil

  I just know there is two kind of firewalls. Stateless and stateful. It's hard to determine what kind of firewall I have to use. Currently I have to run firewall within same machine runs services, Basically I want stateless because of its less resource consumption. However if it is not sufficient for security, it's meaningless. I'll run HTTP, SSH, NFS (only over SSH), and some custom made server on several TCP/UDP ports. Should I use stateful firewall? (edit) Maybe the question can be assumed as 'Should I use stateful rules?'.

  Read the article

• PID:4 using Port 80

  - by CyberOPS

  I was trying to install Zend Server CE on my computer but when I got to the point were I need to choose the port for my Web Server it says: "Web Server Port: 80 Occupied". So I decided to check what is using Port 80 with CMD by typing: "netstat -o -n -a | findstr 0.0:80": TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4 I check for PID:4 in Task Manager's Processes and Services. Seems PID 4 is "System". So, what I want to know is how can I stop "System" (PID:4) from using Port 80? INFO: I am using: Windows 7 64bit; Zend Server CE 5.5.0

  Read the article

• How do I access an Ubuntu VirtualBox guest at a static IP from an OS X host?

  - by David Siegel

  How does one configure an Ubuntu guest to use a static IP that's visible to an OS X host, and ensure that the static IP is independent of the host's network configuration? I previously used bridged networking for my guest, but I'm constantly moving my host between networks so the guest IP is always different. First, I tried setting the guest network configuration to NAT and forwarding host port 1022 to guest port 22, so I could at least ssh to a fixed address (localhost:1022): $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/Protocol" "TCP" $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/GuestPort" 22 $ VBoxManage setextradata "Ubuntu Server" "VBoxInternal/Devices/e1000/0/LUN#0/Config/SSH/HostPort" 1022 Then, $ ssh localhost -p 1022 ssh: connect to host localhost port 1022: Connection refused But this didn't work (guest has no network access with NAT and OS X refused the connection, as you can see). I'd love a general solution that would let me communicate with my guest at a fixed IP.

  Read the article

• quick check of open port

  - by shantanuo

  The following is working as expected. (do not want to use nmap) I need to use nc (or any other built-in centOS) command in shell script to check the port 6379 of a remote server. I want the script to exit quickly if no response received in less than 1 second. But it seems that nc will wait for too long before quitting with exit code of 1 How do I "quickly" check if the port is listening? # time nc -z 1.2.3.4 1234 real 0m21.001s user 0m0.000s sys 0m0.000s # echo $? 1 # time nc -z 1.2.3.4 6379 Connection to 1.2.3.4 6379 port [tcp/*] succeeded! real 0m0.272s user 0m0.000s sys 0m0.008s # echo $? 0

  Read the article

• Firewire 800 with Windows

  - by Amitesh

  I have two windows machine with windows server 2003 installed on them. I am running a Lab View script on 1 machine and storing the data. But since it has less memory, I want to transfer data to another machine using firewire 800. Is it possible to configure out the second machine just as an external HDD attached to it and write data directly to it? (This is possible with MACs) Dont want to use the ethernet (internet/ TCP/IP prot.) to transfer the data. Is it possible? Thanks.

  Read the article

• Airpot Express configuration

  - by Christina

  We are trying to set up remote access to a computer that houses a server fro a particular program we are running. The program says we need to configure the office router. In the firewall settings it says to open ports 5345-5351 (TCP only). Port Forwarding: You will also need to forward the same range of ports (5345-5351) to the computer running the Server. This typically requires that the computer running the Server be assigned a static IP on the local network. Having trouble figuring out which IP address we actually need to be using on the client side of this program in order to access the server computer. Can someone walk through this process?? We are working on Mac OSX 10.5. Thank you in advance!

  Read the article

• Limit number of simultaneous connections squid makes to a single server

  - by Ben Voigt

  Note: I am asking about outbound concurrent connection limits, not inbound, which is sufficiently covered on existing questions Modern browsers typically open a large number of simultaneous connections, to take advantage of the fact that TCP fairly shares bandwidth between connections. Of course, this doesn't result in fair sharing between users, so some servers have started penalizing hosts which open too many connections. This limit can be configured client-side (e.g. IE MaxConnectionsPerServer, Firefox network.http.max-connections-per-server), but the method differs for each browser and version, and many users aren't competent to adjust it themselves. So we turn to a squid transparent HTTP proxy for central management of HTTP download. How can the number of simultaneous connections from squid to a remote webserver be limited, so the webserver doesn't perceive it as abuse of concurrent connections? Ideally the limit would be per source address. Squid should accept virtually unlimited concurrent requests from the client browser, and issue them sequentially to the remote server, only N at a time, delaying (but not dropping) the others.

  Read the article

• block access to wrt from vlan using iptables dd-wrt

  - by NitroxDM

  I set up multiple isolated vlans in dd-wrt. Now I need to forward a port to vlan2. I isolated the vlans using: iptables -I FORWARD -i br0 -o vlan2 -j DROP iptables -I FORWARD -i br0 -o vlan3 -j DROP iptables -I FORWARD -i br0 -o vlan4 -j DROP Now I need to block a clients on each vlan from accessing the router. This doesn't work: iptables -I INPUT -i br0 -o vlan2 --dport telnet -j REJECT --reject-with tcp-reset I'm new it iptables... am I missing something?

  Read the article

• Laptop is Switching DNS Servers

  - by Steffan Harris

  Ok sometime ago I changed my ip address to a static one because I was bored and I wanted to learn more about static ips. I am running windows xp. My laptop works find on the network that i set up a static ip address, but when i go to another network, the incorrect dns servers are being used. When I enter the option to get a dns server automatically, the internet connection works but only for a short time. After that the dns servers resets to the one i entered manually on a previous network. I did this by going to Network Connection-Right Click Local Area Connection and go to properties-Select TCP/IP - then click the Properties button. At this point i am given the option to Obtain an ip address or obtain and address automatically. My question is how do I resolve this problem of the dns server reseting to the previous one.

  Read the article

• Is it possible to limit output bandwidth between eth0 and lo?

  - by mmcbro

  I'm trying to limit the bandwidth between my eth0 output (nginx proxy) to my loopback inteface (apache) by filtering on destination port. Incoming Packet -> Eth0 -> 0.0.0.0:80 Nginx -> tc qdisc class/iptable mangle 2525port -> 127.0.0.1:2525 Apache I don't know if it's even possible I'm just experimenting. My rules are the followings : tc qdisc add dev eth0 root handle 1:0 htb tc class add dev eth0 parent 1:0 classid 1:10 htb rate 2mbps ceil 2mbps prio 0 tc filter add dev eth0 parent 1:0 prio 0 protocol ip handle 10 fw flowid 1:10 iptables -A OUTPUT -t mangle -p tcp --dport 2525 -j MARK --set-mark 10 I also tried to with FORWARD chain but its still the same.

  Read the article

• No internet connection for some programmes after installing ad hoc wireless network

  - by Michael

  After installing a wireless network (through the program iPhoneModem) several programmes have stopped working when connected to the Internet using another wireless connection. Working programmes: Firefox (browser) uTorrent (p2p) FileZilla (ftp) etc. Programmes that are not working: Chrome (browser) Digsby (IM client) etc. I'm running Windows 7. I have tried to disable Windows Firewall entirely as well as AVG anti virus, with no effect. I've tried to run the FixIt program from Microsoft adressing a corrupt TCP/IP stack. This too had no effect. Any suggestions?

  Read the article

• GUI session from Mac to Linux, over WAN

  - by kellogs

  Closest thing I could find here was this I am on Mac OS 10.5.6 with X server installed. This is the machine I am trying to get GUI session data onto. There is an Ubuntu 11.10 Linux on which I have installed an X server and GDM. This is the machine where the GUI session data should come from. Currently, I got to the point where Linux listenes on port TCP 6000 for its clients. 1 - how do I swap port 6000 for port 6767 ? 2 - how do I connect to 6767 from my Mac ? Thanks

  Read the article

• How to broadcast a command on Windows

  - by Xiao Jia

  I am going to frequently deploy different versions of a program on a cluster of Windows machines (mostly Windows XP), so I am willing to use a command-line broadcasting tool (either built-in or 3rd-party) to (1) download a file from some URL, and (2) execute the same command, on all the machines. I googled for a very long time but got nothing related to my goal. (Only pages about broadcasting a message, broadcasting ping, or programmatically broadcast via TCP/IP, etc.) Are there any tool for this purpose? Or is it possible to do it pragmatically (without installing extra client programs on those machines)?

  Read the article

• ASA Slow IPSec Performance

  - by Brent

  I have a IPSec link between two sites over ASA 5520s running 8.4(3) and I am getting extremly poor performance when traffic passes over the VPN. CPU on the device is 13%, Memory at 408 MB, and active VPN sessions 2 so the load on the device is particularly low. Screenshot of wireshark file transfer between the two hosts over the VPN: The large amount of Header checksum failures is alarming, but I am not sure what to check now. I perf is showing around 4-5 Mbit/sec with differing TCP window sizes. Show Run on the ASA http://pastebin.com/uKM4Jh76 Show cry accelerator stats http://pastebin.com/xQahnqK3

  Read the article

• Rejecting new HTTP requests when server reaches a certain throughput

  - by Sam

  I have a requirement to run an HTTP server that rejects new HTTP requests (with a 503, or similar) when the global transfer rate of current HTTP responses exceeds a certain level. For example, if the web server is transferring at 98Mbps, and a new HTTP request arrives, we would want to reject this (as we couldn't guarantee a good speed). I've had a look at mod_cband for Apache, limit_req for nginx, and lighttpd's rate limiting features, but none of them seem to handle my (rather contrived, granted) use case. I should add that I'm open to using pretty much any web server, and am open to implementing this in iptables rules if someone can craft such a rule! (Refusing the TCP connection is fine, it doesn't have to respond with an HTTP 503). Any suggestions?

  Read the article

• Where would an S3 upload speed cap originate?

  - by CoreyH

  I do a ton of uploading to S3 and am experiencing capped speeds and I can't quite figure out how to address it. The setup: Windows Server 2008 R2 x64, external HD, using a Java based upload tool called Jsh3ll and custom VBS scripts to kick the jobs off. Running one process at a time, I am always limited to about 4mbps. I have FiOS at 35/35mbps speeds, so it isn't an outright limit. AND, I can run parallel instances and can go all the way up to 35mbps, so I know the problem isn't gateway/nic/machine/amazon related. Running parallel instances works to a degree as a solution, but increases the complexity of my workflow greatly. Solving this would make my life dramatically easier. When I was first doing this I was playing around with a bunch of Windows TCP parameters and was able to briefly get unconstrained bandwidth, but it wasn't repeatable. Thoughts?

  Read the article

• Simulating network latency for localhost connection on Windows 7

  - by nitro2k01

  I need to simulate network latency to a program running on the local computer, connecting to a local service. Thus far I have tried dummynet (a windows build of ipfw) which I got working after some trial and error. While it generally works, I can't seem to get it to filter localhost traffic. Even after adding a rule from any to any which affects external traffic, this makes no difference for local connections. I would appreciate if anyone knows how to simulate local latency using dummynet or a different tool. The tool should be able to simulate latency generically in IP packets, (TCP and UDP) and not be protocol specific.

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >