Search Results

Search found 15386 results on 616 pages for 'usb port'.

Page 95/616 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • What does opening a serial port do?

    - by reve_etrange
    What does opening the standard PC serial port do, in electrical terms (i.e. what voltages on which pins)? For example, the ancient VB6 program which controls an apparatus I am tasked with maintaining toggles .PortOpen to control some TTL. The connection only used 2 pins (bad solders fell apart), so which pins do I solder to? The only labels / documentation refer to pins 7 and 9, saying 0V and 5V parenthetically, but does .PortOpen really just put 5V between RI and RTS?. As a post script, this isn't the weirdest thing about the set up. The TTL I referred to above also connects to an instrument via a BNC to DB9 (!), with only 1 pin used. I guess there was an assumption about a common ground, since the BNC shielding isn't connected to the GND pin? The connection is to the instrument's 'foot pedal' pin, it was a way to remotely trigger the device. Update According to this page, the DTR and RTS pins can go high when the port is opened. If they were so configured, they will subsequently go low when the port is closed. If DTR and RTS are not enabled, opening the port should set both to low (and keep them low).

    Read the article

  • Svchost.exe connecting to different IPs with remote port 445

    - by Coll911
    Im using Windows XP Professional SP2. Whenever I start my Windows, svchost.exe starts connecting to all the possible IPs on LAN like from 192.168.1.2 to 192.168.1.200. The local port ranges from 1000-1099 and the remote port being 445. After it's done with the local IPs, it starts connecting to other random IPs. I tried blocking connections to the port 445 using the local security polices but it didn't work. Is there any possible way I could prevent svchost from connecting to these IPs without involving any firewall installed? My PC slows down due to the load. I scanned my PC with MalwareBytes and found out it was infected with a worm, it's deleted now but still svchost is connecting to the IPs. I also found out that in my Windows Firewall settings, under Internet Control Message Protocol (ICMP), there's a tick on "allow incoming echo request" (usually disabled) which is locked and I can't disable it. Its description is as follows Messages sent to this computer will be repeated back to the sender. This is used for trouble shooting for e.g to ping a machine. Requests of this type are automatically allowed if TCP port 445 is enabled. Any solutions? I can't bear going with the reinstalling Windows phase again.

    Read the article

  • I can't change mysql port (5.6.12) changing the lines of my.ini (windows 8)

    - by videador
    I was trying to change the port of my mysql server in my local machine but i can't. The version of mysql is 5.6.12, is an installation from wamp and I am on Windows 8. I change these lines in my my.ini file located in (C:\wamp\bin\mysql\mysql5.6.12). [client] #password = your_password port = 3307 socket = /tmp/mysql.sock [wampmysqld] port = 3307 socket = /tmp/mysql.sock key_buffer = 16M max_allowed_packet = 1M The previous values were 3306. Ok then I've reset the server installed, but it doesn't works, the mysql server is still running on 3306. Then, I rename the path of the services with this, to make sure that the my.ini is read by the mysql instance. c:\wamp\bin\mysql\mysql5.6.12\bin\mysqld.exe --defaults-file="C:\wamp\bin\mysql\mysql5.6.12\my.ini" wampmysqld But nothing, it stil doesn't works. My last bullet was to copy the content of my.ini to a file my-default.ini (a file that is placed in C:\wamp\bin\mysql\mysql5.6.12\ and that I don't know what is its mission). However it still doesn't work and the port is still 3306.

    Read the article

  • Redirect traffic from 127.0.0.1 to 127.0.0.1 on port 53 to port 5300 with iptables

    - by Zagorax
    I'm running a local dns server on port 5300 to develop a software. I need my machine to use that dns but I wasn't able to tell /etc/resolv.conf to check on a different port. I searched a bit on google and I didn't find a solution. I set 127.0.0.1 as nameserver on /etc/resolv.conf. This is my whole /etc/resolv.conf: nameserver 127.0.0.1 Could you please tell me how can I redirect outbound traffic on port 53 to another port? I tried the following but it didn't work: iptables -t nat -A PREROUTING -p tcp --dport 53 -j DNAT --to 127.0.0.1:5300 iptables -t nat -A PREROUTING -p udp --dport 53 -j DNAT --to 127.0.0.1:5300 Here is the output of iptables -t nat -L -v -n (with suggested rules): Chain PREROUTING (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 REDIRECT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53 redir ports 5300 0 0 REDIRECT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:53 redir ports 5300 Chain POSTROUTING (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 302 packets, 19213 bytes) pkts bytes target prot opt in out source destination

    Read the article

  • Ubuntu + Wacom Intuos 4 + MyPaint HELP!

    - by Sativa
    Please keep in mind I'm not that computer savvy, but I will try any suggestion so please help me out! My tablet will stop working if the USB connection is ever broken, or the Ubuntu software is being updated. Sometimes it will stop working for no reason that I can see. The lights will still be on, but it won't be responsive. It doesn't work again until I restart the laptop with the tablet plugged in, which is grating if you have to do it every 25 min. or so... I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! Also, MyPaint is frequently having hiccups. It seems to save fine but at times it will randomly close down and when I open files they're often empty. They turn into 0Kb files and only contain a single empty layer. Also very grating, considering I lose days of work for no clear reason and without any heads up. Again, I'm not sure if the issue is with the port, the tablet/cable or the driver but any suggestions would be very welcome! The error message reads; Traceback (most recent call last): File "/usr/share/mypaint/gui/application.py", line 177, at_application_start(*junk=()) else: self.filehandler.open_file(fn) variables: {'fn': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora'), 'self.filehandler.open_file': ('local', <bound method FileHandler.wrapper of <gui.filehandling.FileHandler object at 0x7fdb89063a10>>)} File "/usr/share/mypaint/gui/drawwindow.py", line 60, wrapper(self=<gui.filehandling.FileHandler object>, *args=(u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',), **kwargs={}) try: func(self, *args, **kwargs) # gtk main loop may be called in here... variables: {'self': ('local', <gui.filehandling.FileHandler object at 0x7fdb89063a10>), 'args': ('local', (u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora',)), 'func': ('local', <function open_file at 0x7fdb8b397b90>), 'kwargs': ('local', {})} File "/usr/share/mypaint/gui/filehandling.py", line 231, open_file(self=<gui.filehandling.FileHandler object>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora') try: self.doc.model.load(filename, feedback_cb=self.gtk_main_tick) except document.SaveLoadError, e: variables: {'self.doc.model.load': ('local', <bound method Document.load of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'feedback_cb': (None, []), 'self.gtk_main_tick': ('local', <function gtk_main_tick at 0x7fdb8b397b18>), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 544, load(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', **kwargs={'feedback_cb': <function gtk_main_tick>}) try: load(filename, **kwargs) except gobject.GError, e: variables: {'load': ('local', <bound method Document.load_ora of <lib.document.Document instance at 0x7fdb8ab4f8c0>>), 'kwargs': ('local', {'feedback_cb': <function gtk_main_tick at 0x7fdb8b397b18>}), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/share/mypaint/lib/document.py", line 772, load_ora(self=<lib.document.Document instance>, filename=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', feedback_cb=<function gtk_main_tick>) tempdir = tempdir.decode(sys.getfilesystemencoding()) z = zipfile.ZipFile(filename) print 'mimetype:', z.read('mimetype').strip() variables: {'zipfile.ZipFile': ('global', <class 'zipfile.ZipFile'>), 'z': (None, []), 'filename': ('local', u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora')} File "/usr/lib/python2.7/zipfile.py", line 770, __init__(self=<zipfile.ZipFile object>, file=u'/home/maria/Desktop/Drawings/WIPs/Sativa Chibi.ora', mode='r', compression=0, allowZip64=False) if key == 'r': self._RealGetContents() elif key == 'w': variables: {'self._RealGetContents': ('local', <bound method ZipFile._RealGetContents of <zipfile.ZipFile object at 0x7fdb9b952790>>)} File "/usr/lib/python2.7/zipfile.py", line 811, _RealGetContents(self=<zipfile.ZipFile object>) if not endrec: raise BadZipfile, "File is not a zip file" if self.debug > 1: variables: {'BadZipfile': ('global', <class 'zipfile.BadZipfile'>)} BadZipfile: File is not a zip file

    Read the article

  • Explain why MickroC pic18f4550 HID example works

    - by Dr Deo
    MickroC compiler has a library for HID(Human Interface Device) usb communication. In the supplied samples, they specify that the buffers below should be in USB ram and use a pic18f4550. unsigned char readbuff[64] absolute 0x500; // Buffers should be in USB RAM, please consult datasheet unsigned char writebuff[64] absolute 0x540; But the pic18f4550 datasheet says USB ram ranges from 400h to 4FFh So why does their example work when their buffers appear not to be between 400h to 4FFh? Link to full source

    Read the article

  • PortForwarding to IIS in Linux

    - by Simon
    Hi, I am trying to set up port forwarding on a linux box to a IIS webserver on my internal network. The web server sits on Windows 2003 Server. My linux box has eth0 - Internet connection eth1 - internal subnet (10.10.10.x) eth2 - 2nd internal subnet (129.168.0.x) dhcp interface my webserver is on the eth2 interface (192.168.0.6) I am doing port forwarding for port 80 with no avail. I use the same set of rules to port forward to a different webserver and it works. The webapplication is available on the internal network but not for external users. iptables -t nat -A PREROUTING -p tcp -i eth0 -d $PUBLIC_IP --dport 80 -j DNAT --to 192.168.0.6:80 iptables -A FORWARD -p tcp -i eth0 -o eth2 -d 192.168.0.6 --dport 80 -m state --state NEW -j ACCEPT iptables -A FORWARD -t filter -o eth0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i eth0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE Any Ideas?

    Read the article

  • One IP, One Port, Multiple Servers

    - by Adrian Godong
    I am looking for a solution to forward one public IP address and one specific port to different machines based on hostname (as of now, I need it only for HTTP). The current setup is NAT on a commodity router (it only provide simple public port to private IP address / port forwarding). I can add a Windows Server 2008 R2 machine before the router if required, but prefer not to do so. So ideally, I would like to have the current setup and the forwarding is done on one of the Windows Servers. Is it possible to do this?

    Read the article

  • Custom BizTalk, Orchestration SMTP Adapter Dynamic send port

    How to build a BizTalk application that will allow run time configuration and sending of SMTP email from within an orchestration  read moreBy BiZTech KnowDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Dedicated NIC or dedicated port for iSCSI?

    - by Newt
    When spec'ing and configuring a machine that will utilise shared iSCSI storage, I've read a lot of documentation which suggests a dedicated network adapter should be used for iSCSI communication. That makes a lot of sense and I have no problem with it. The question I do have, is this - should that suggestion be taken to mean that a separate physical NIC should be used, or will a dedicated port/ports on a dual/quad port NIC be just as good? My suspicion is that simply using dedicated port(s) on a shared NIC would be just as good. Any input greatly appreciated.

    Read the article

  • Port forwarding (portmap) works only locally

    - by Tag Wint
    There are four hosts hostA winXP hostB Win2003 hostC Linux RHEL hostD Linux RHEL hostA cannot connect to C and D directly, but B can hostA connects to hostB using VPN hostB and hostC belong to the same subnet1 hostD is in subnet2 From hostA I need to connect to hostC and hostD by SSH. Now I can do it as follows: 1.connecting from hostA to hostB by RDP logon and there: 2.start putty client. I'd like to omit step 1 and connect from A to C and D directly On hostB I have admin acoount and configure port forwarding as follows: netsh interface portproxy add v4tov4 listenport=N1 connectaddress=hostC_IP connectport=N2 netsh interface portproxy add v4tov4 listenport=N3 connectaddress=hostD_IP connectport=N2 netsh interface portproxy show all: Listen on IPv4: Connect to IPv4: Address Port Address Port --------------- ---------- --------------- ---------- * N1 hostC_IP N2 * N3 hostD_IP N2 Now from hostB I can connect to either C and D: ssh localhost:N1 ssh localhost:N3 from hostA ssh hostB:N1 works too, but ssh hostB:N3 DON'T I guess the reason might be different subnets, still have no idea how to fix it. What should I do?

    Read the article

  • Re-Route Mail to a port other than 25

    - by Ken
    Is there a way to route mail to another port? I have an email account attached to my laptop that I'd like to be able to send and receive mail from. Due to mobility, I'll be passing through various networks that will probably block this port. My dynamic DNS provider allows me to utilize web-forwards for MX domains; is this possible? where I can web forward to a domain:port which is managed by my DNS provider when I traverse between networks. If not, is there a way? Of course i could use web-mail or relay-forwarding from my home server, but that's not geeky enough.

    Read the article

  • Running multiple services on Port 443, Tunnel SSH over HTTPS

    - by lajuette
    Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

    Read the article

  • Trouble with setting up Mac SSH with TP-LINK router

    - by arxanas
    I have a Mac running OS X 10.7.2, and a TP-Link TL-WR740N (whose control panel looks like this). Remote Login is on in the Mac's System Preferences, and port 22 is set to forward on the router. I can access my Mac as a web server using the external IP on port 80, which I have set up through the same port-forwarding mechanism provided by the router, but when I try to ssh server@external-ip, it just times out after a long while. (The same thing happens when I try vnc.) I can, however, ssh and vnc successfully into that computer while I'm on the same network when using its internal IP. Since ssh appears to work and port forwarding appears to work, I can't figure out what's causing the problem. Does anyone have any idea what might cause this?

    Read the article

  • Custom BizTalk, Orchestration SMTP Adapter Dynamic send port

    How to build a BizTalk application that will allow run time configuration and sending of SMTP email from within an orchestration  read moreBy BiZTech KnowDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Super Joybox 5 HID 0925:8884 not recognized as joystick in Ubuntu 12.04 LTS

    - by Tim Evans
    Problem: When using the "Super JoyBox 5" 4 port playstation 2 to USB adapter, the device is not recognized as a joystick. there is no js0 created, but instead another input eventX and mouseX are created in /dev/input. When using the directional buttons (up down left right) on a Playstation 1 controller attached to the device, the mouse cursor moves to the top, bottom, left, and right edges of the screen respectively. Buttons are unresponsive. The joypads attached to the device cannot be used in any games or other programs. Attempted remedies: Creating a symlink from the eventX to js0 does not solve the problem. Addl Info: joydev is loaded and running peroperly according to LSMOD. evtest can be run on the created eventX (sudo evtest /dev/input/event14 in my case) and the buttons and axes all register inputs. Here is a paste of EVTEST's diagnostic and the first couple button events. [code] sudo evtest /dev/input/event14 Input driver version is 1.0.1 Input device ID: bus 0x3 vendor 0x925 product 0x8884 version 0x100 Input device name: "HID 0925:8884" Supported events: Event type 0 (EV_SYN) Event type 1 (EV_KEY) Event code 288 (BTN_TRIGGER) Event code 289 (BTN_THUMB) Event code 290 (BTN_THUMB2) Event code 291 (BTN_TOP) Event code 292 (BTN_TOP2) Event code 293 (BTN_PINKIE) Event code 294 (BTN_BASE) Event code 295 (BTN_BASE2) Event code 296 (BTN_BASE3) Event code 297 (BTN_BASE4) Event code 298 (BTN_BASE5) Event code 299 (BTN_BASE6) Event code 300 (?) Event code 301 (?) Event code 302 (?) Event code 303 (BTN_DEAD) Event code 304 (BTN_A) Event code 305 (BTN_B) Event code 306 (BTN_C) Event code 307 (BTN_X) Event code 308 (BTN_Y) Event code 309 (BTN_Z) Event code 310 (BTN_TL) Event code 311 (BTN_TR) Event code 312 (BTN_TL2) Event code 313 (BTN_TR2) Event code 314 (BTN_SELECT) Event code 315 (BTN_START) Event code 316 (BTN_MODE) Event code 317 (BTN_THUMBL) Event code 318 (BTN_THUMBR) Event code 319 (?) Event code 320 (BTN_TOOL_PEN) Event code 321 (BTN_TOOL_RUBBER) Event code 322 (BTN_TOOL_BRUSH) Event code 323 (BTN_TOOL_PENCIL) Event code 324 (BTN_TOOL_AIRBRUSH) Event code 325 (BTN_TOOL_FINGER) Event code 326 (BTN_TOOL_MOUSE) Event code 327 (BTN_TOOL_LENS) Event code 328 (?) Event code 329 (?) Event code 330 (BTN_TOUCH) Event code 331 (BTN_STYLUS) Event code 332 (BTN_STYLUS2) Event code 333 (BTN_TOOL_DOUBLETAP) Event code 334 (BTN_TOOL_TRIPLETAP) Event code 335 (BTN_TOOL_QUADTAP) Event type 3 (EV_ABS) Event code 0 (ABS_X) Value 127 Min 0 Max 255 Flat 15 Event code 1 (ABS_Y) Value 127 Min 0 Max 255 Flat 15 Event code 2 (ABS_Z) Value 127 Min 0 Max 255 Flat 15 Event code 3 (ABS_RX) Value 127 Min 0 Max 255 Flat 15 Event code 4 (ABS_RY) Value 127 Min 0 Max 255 Flat 15 Event code 5 (ABS_RZ) Value 127 Min 0 Max 255 Flat 15 Event code 6 (ABS_THROTTLE) Value 127 Min 0 Max 255 Flat 15 Event code 7 (ABS_RUDDER) Value 127 Min 0 Max 255 Flat 15 Event code 8 (ABS_WHEEL) Value 127 Min 0 Max 255 Flat 15 Event code 9 (ABS_GAS) Value 127 Min 0 Max 255 Flat 15 Event code 10 (ABS_BRAKE) Value 127 Min 0 Max 255 Flat 15 Event code 11 (?) Value 127 Min 0 Max 255 Flat 15 Event code 12 (?) Value 127 Min 0 Max 255 Flat 15 Event code 13 (?) Value 127 Min 0 Max 255 Flat 15 Event code 14 (?) Value 127 Min 0 Max 255 Flat 15 Event code 15 (?) Value 127 Min 0 Max 255 Flat 15 Event code 16 (ABS_HAT0X) Value 0 Min -1 Max 1 Event code 17 (ABS_HAT0Y) Value 0 Min -1 Max 1 Event code 18 (ABS_HAT1X) Value 0 Min -1 Max 1 Event code 19 (ABS_HAT1Y) Value 0 Min -1 Max 1 Event code 20 (ABS_HAT2X) Value 0 Min -1 Max 1 Event code 21 (ABS_HAT2Y) Value 0 Min -1 Max 1 Event code 22 (ABS_HAT3X) Value 0 Min -1 Max 1 Event code 23 (ABS_HAT3Y) Value 0 Min -1 Max 1 Event type 4 (EV_MSC) Event code 4 (MSC_SCAN) Testing ... (interrupt to exit) Event: time 1351223176.126127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223176.126130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 1 Event: time 1351223176.126166, -------------- SYN_REPORT ------------ Event: time 1351223178.238127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90001 Event: time 1351223178.238130, type 1 (EV_KEY), code 288 (BTN_TRIGGER), value 0 Event: time 1351223178.238167, -------------- SYN_REPORT ------------ Event: time 1351223180.422127, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223180.422129, type 1 (EV_KEY), code 289 (BTN_THUMB), value 1 Event: time 1351223180.422163, -------------- SYN_REPORT ------------ Event: time 1351223181.558099, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90002 Event: time 1351223181.558102, type 1 (EV_KEY), code 289 (BTN_THUMB), value 0 Event: time 1351223181.558137, -------------- SYN_REPORT ------------ Event: time 1351223182.486137, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223182.486140, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 1 Event: time 1351223182.486172, -------------- SYN_REPORT ------------ Event: time 1351223183.302130, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90003 Event: time 1351223183.302132, type 1 (EV_KEY), code 290 (BTN_THUMB2), value 0 Event: time 1351223183.302165, -------------- SYN_REPORT ------------ Event: time 1351223184.030133, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.030136, type 1 (EV_KEY), code 291 (BTN_TOP), value 1 Event: time 1351223184.030166, -------------- SYN_REPORT ------------ Event: time 1351223184.558135, type 4 (EV_MSC), code 4 (MSC_SCAN), value 90004 Event: time 1351223184.558138, type 1 (EV_KEY), code 291 (BTN_TOP), value 0 Event: time 1351223184.558168, -------------- SYN_REPORT ------------ [/code] The directional buttons on the pad are being identified as HAT0Y and HAT0X axes, thats zero, not the letter O. Aparently, this device used to work flawlessly on kernel 2.4.x systems, and even as late as ubunto 10.04. Perhaps the Joydev rules for identifying joypads has changed? Currently, this kind of bug is affecting a few different type of controller adapters, but since this is the one that i PERSONALLY have (and has been driving me my own special brand of crazy), its the one im documenting. What i think should be happening instead: The device should be registering js0 through js3, one for each port, or JS0 that will handle all of the connected devices with different numbered axes for each connected joypad. Either way, it should work as a joystick and stop controlling the mouse cursor. Please help!

    Read the article

  • Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

    - by yothenberg
    I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

    Read the article

  • Url rewriting stops working after changing default port on iis7

    - by Somesh
    I have migrated the IIS6 webserver 2003 websites to IIS7 webserver 2008 using msdeploy tool. Application pool setting are changed with "Enable 32-bit Applications=true", "Managed_Pipeline_Mode=Classic","Identity=NetworkService" Framework=v1.1/2.0. All the websites are working fine on default port along with url rewriting migrated from iis6. When I start the webserver on port other than default port by changing bindings, url rewriting stops workings and get 404 error in logs. I think I don't have to change the handler mapping cause I am running it in classic mode. How can I troubleshoot this?

    Read the article

  • Syn_Recievd on port 80 , IIS 7.5

    - by Ashian
    Hi I have a trouble on my windows 2008 server. I host several web site on it. From some days ago, my web sites stop responding on port 80 after a while. In this time I can't access web sites from local machine and from remote. I can also browse websites on other ports ( custom port that I set) I find that I have many Syn_Received status on netstat. And when web sites stop, I got only syn_received on port 80. I have to restart server because when I try to restart IIS , it takes a long time to stop W3SVC and many times it doesn’t stop at all. Would anyone please tell me : - How can I manage Syn Attack ? Thanks

    Read the article

  • How can I get my routers to forward ports correctly?

    - by Giffyguy
    My network currently looks like this (simplified): Note that Router #2 is connected to the LAN interface of Router #1. This should be familiar to anyone who has seen a standard static-IP setup with an additional firewall for a residence or other small building. Router #1 is actually my cable gateway, but since it is a fully functional router/firewall, I am going to refer to it as a router. Now, I need to open various ports in both firewalls for incoming communication to my server - port 80 is a good example. So I've opened up port 80 in Router #2, and so far all incoming traffic at the public IP X.X.X.129 is being routed correctly. The problem is that I also need my server to respond to incoming traffic at the public IP X.X.X.130 on the WAN interface of Router #1. Naturally, I can't just tell Router #1 to forward port 80 to another public IP. Port forwarding is only supported when the traffic is being directed to the LAN subnet. I am willing to restructure my network topology if required, with the following conditions: Router #1 cannot have its WAN IP reassigned - X.X.X.130 is mandatory. Router #1 cannot be moved or disconnected from the cloud. The server cannot be given a second IP address. I would prefer the server to have a private IP address - e.g. 10.0.0.10 I'd like to keep Router #2, but it can have a private IP - e.g. 10.0.1.10 Following these rules, I need to get my server to receive incoming traffic on port 80 from both public IP addresses. Does anyone on SU know if this is possible? So far my only theories have been to set up a static route on either router, or to somehow combine my two subnets into a single subnet.

    Read the article

  • Cannot connect to postgresql on port 5432

    - by Assaf Lavie
    I installed the Bitnami Django stack which included PostgreSQL 8.4. When I run psql -U postgres I get the following error: psql: could not connect to server: No such file or directory Is the server running locally and accepting connections on Unix domain socket "/var/run/postgresql/.s.PGSQL.5432"? PG is definitely running and the pg_hba.conf file looks like this: # TYPE DATABASE USER CIDR-ADDRESS METHOD # "local" is for Unix domain socket connections only local all all md5 # IPv4 local connections: host all all 127.0.0.1/32 md5 # IPv6 local connections: host all all ::1/128 md5 What gives? "Proof" that pg is running: root@assaf-desktop:/home/assaf# ps axf | grep postgres 14338 ? S 0:00 /opt/djangostack-1.3-0/postgresql/bin/postgres -D /opt/djangostack-1.3-0/postgresql/data -p 5432 14347 ? Ss 0:00 \_ postgres: writer process 14348 ? Ss 0:00 \_ postgres: wal writer process 14349 ? Ss 0:00 \_ postgres: autovacuum launcher process 14350 ? Ss 0:00 \_ postgres: stats collector process 15139 pts/1 S+ 0:00 \_ grep --color=auto postgres root@assaf-desktop:/home/assaf# netstat -nltp | grep 5432 tcp 0 0 127.0.0.1:5432 0.0.0.0:* LISTEN 14338/postgres tcp6 0 0 ::1:5432 :::* LISTEN 14338/postgres root@assaf-desktop:/home/assaf#

    Read the article

  • cannot send emails to other Web servers

    - by developer
    I'm trying to limit my server's open ports in CSF. The IPv4 port settings include: # Allow incoming TCP ports TCP_IN = "22,25,53,80,110,143,443,587,3654,53343” # Allow outgoing TCP ports TCP_OUT = "22,53,80,113,443,465,995,3654" # Allow incoming UDP ports UDP_IN = "53" # Allow outgoing UDP ports # To allow outgoing traceroute add 33434:33523 to this list UDP_OUT = "53,113,123" As you see, I have port 25 open in TCP_IN but have removed it from TCP_OUT. The reason is I wanted to have my mails transmitted over smtps, so I have port 465 opened instead in TCP_OUT. Since I am using Rouncube in Directpanel, I have also set the following in Rouncube's config.inc.php: $config['default_host'] = 'ssl://mail.mydomain.com'; $config['smtp_server'] = 'ssl://mail.mydomain.com'; $config['smtp_port'] = 465; However, when I remove port 25 from TCP_OUT, I no longer can send mails, say, to gmail, though I can send mails to own. But I can receive all mails. Please let me know if I need to make any further changes. Do I need to disable port 25 at all, to have my mails sent via ssl. Thanks

    Read the article

  • How is virtual machine port opening works

    - by Xianlin
    I have a question regarding VM port. Say I have a Virtual Machine and a Host Machine. The opening ports on Host are 80, 22, 443 only. if I opened ports 80, 22, 443 VM it should be working. However if I opened port 21 on VM, will it work? If it works, does it mean the port 21 on Host is opened also? My understanding is that the network traffic goes from VM's virtual network adapter to Host's physical network adapter. So the ports on these 2 network adapters should match. Am I correct to say this?

    Read the article

  • forwarding port 3306 on macosx in order to connect to a remote mysql db

    - by Jonathan Mayhak
    I'm on macosx 10.6.2 trying to connect to ubuntu server 8.04.1 at linode. ssh -L 127.0.0.1:3306:[[remote ip]]:3306 user@server -N I want to set up ssh tunneling so that I can access a remote mysql server. First of all, I'm told bind: Address already in use. This is only after I've tried the command before. How do I manually close a port forwarding session? Second, when I change the command to be ssh -L 127.0.0.1:3310:[[remote ip]]:3306 user@server -N (I changed the local port to listen on). I'm told channel 1: open failed: connect failed: Connection refused when I try to connect to the mysql server via mysql workbench or sequel pro. To connect through mysql workbench I use the following settings: host: 127.0.0.1 port: 3310 (if 3306 is in use) username: mysql username password: mysql password database: I don't put anything in

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >