Search Results

Search found 5213 results on 209 pages for 'worm regards'.

Page 95/209 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

• Computer sending data while turned of

  - by Nicklas Ansman

  I have a some what strange problem (which could have and easy and obvious solution for all I know). My problem is that when I've booted ubuntu (now 10.4 but same problem with 9.10) and turns it off it starts sending a HUGE amount of data via the ethernet cable, so much in fact that my router can't handle it and stops responding. As far as I can tell the computer is completely turned off with no fans spinning. I can add that if I boot windows I do not have this problem, just when exiting ubuntu. There are two "fixes" for my problem: Pull the ethernet cable until the next boot Turn off power to the PSU and wait for the capacitors to unload Is there anyone who knows what could be going on? I'd be happy to post some logs or conf-files. Currently I'm using the ethernet port on my motherboard which is a Asus P6T Deluxe V2 with an updated version of the BIOS (maybe not the latest but since it only happens when I've been in ubuntu I don't wanna mess with the BIOS too much). Regards Nicklas

  Read the article

• Virtual hosting in Varnish with individual vcl files for configuration

  - by Michael Sørensen

  I wish to use varnish to put in front of an apache and a tomcat on the same server. Depending on the ip requested, it goes to a different backend. This works. Now for most of the sites the default varnish logic will work just fine. However for some specific sites I wish to use custom VCL code. I can test for host name and include config files for the specific domains, but this only works inside the individual methods recv etc. Is there a way to include a complete set of instructions, in one file, per domain, without having to manage separate files for subdomain_recv, subdomain_fetch etc? And preferably without running seperate instances of varnish. When I try to include a file on the "root level" of default.vcl, I get a compilation error. Best regards, Michael

  Read the article

• Postfix Vacation.pl with local users

  - by Simiyu

  Hi, I am trying to setup the vacation.pl script on a mail servers which has local users only (since they are only 10 users). I have installed the SquirrelMail plugin and the Auto respond option is available for the users, but when an email is sent to the addresses no auto reply email is sent to the sender. There are also no logs on the /var/log/vacation folder which i created as well as the normal log files. Most of the examples online refer to virtual users, can it work with local users? and if so how? regards, Arthur

  Read the article

• 1 iPhone, 2 (potentially 3) Macs......& Google Apps Sync?!

  - by Goober

  Currently I use a beast of a G5 Mac at work for all my software/web development, an iMac G5 at home for personal use & a MacBook Pro for when i'm on the go. At work we make heavy use of all the Google Apps features such as calendar & docs etc. We all have an address book (local mac application) that gets synced with a list of contacts stored on our mail server. I want to be able to integrate the Google Apps calendar with my iPhone calendar (or even just iCal - which i can then sync to the iPhone). Essentially I want all three Macs to have the Google calendar synced to their version of iCal including the iPhone. I've heard that Google Sync handles something along these lines but i'm unsure if it's going to fulfill my needs? I'm trying my best to avoid having to use MobileMe..... Help greatly appreciated, Kind regards

  Read the article

• Linux Mint Debian Cinammon soundcard selection

  - by Peter Gridling

  i use said OS and i am missing a window or setting to set the default soundcard. I have a builtin analog soundcard which works just fine and is set as default, also i have a usb headset which works fine eg. with mumble i set input and output on my headset and it just works, also the mute button and volume control on the headset works, but on the default soundcard lol. what i am missing is to set my headset as the default soudcard. i also tried some stuff from there: http://wiki.debian.org/ALSA/ but it seems that alsa is not supported 100% :( some1 here to help? best regards

  Read the article

• SOCKS Proxy and HTTP Proxy considerations with push notifications

  - by J.Ashworth

  I'm working with push notifications in a mobile application, and I've been informed that a lot of our clients may be using SOCKS or HTTP proxies for outbound and inbound traffic. Is there anything in particular I need to program or document with regards to deploying our mobile app in this sort of environment? If you were setting up and installing the application server, what guarantees would you want from the person that had programmed it? Specifically regarding push notification services for all four major OSes (APNS, GCM, BPS and MPNS). I've got absolutely no experience with proxies or server deployment, in case you couldn't tell :)

  Read the article

• Asterisk doesn't start properly at system startup. DNS lookup fails.

  - by leiflundgren

  When I start my Ubuntu system it attempts two DNS lookups. One to find out what my internet-routers external ip is. And one to find the IP of my PSTN-SIP-provider. Both fails. [Apr 7 22:14:54] WARNING[1675] chan_sip.c: Invalid address for externhost keyword: sip.mydomain.com ... [Apr 7 22:14:54] WARNING[1675] acl.c: Unable to lookup 'sip.myprovider.com' And since the DNS fails it cannot register properly a cannot make outgoing or incoming calls. If I later, after bootup, restart asterisk everything works excelent. Any idea how I should setup things so that either: Delay Asterisk startup so that DNS is up and healthy first. Somehow get Asterisk to re-try the DNS thing later. Regards Leif

  Read the article

• sizes of RAM, of virtual memory and of swap for 32-bit OS

  - by Tim

  If I understand correctly, a 32-bit OS (Ubuntu) can only address 4GiB memory, so RAM with size larger than 4Gib will only be used 4Gib of itself and the rest is a waste. I am now confused about this situation for RAM with similar one for virtual memory and for swap. with virtual memory being swap + RAM, if the size of the virtual memory exceeds 4Gib, will the exceeding part be a waste for the 32-bit OS? if I now have to choose the size for my swap partition, is it a factor to consider that the 32-bit OS can only address 4GiB memory? Does the size of swap have to be chosen with respect to the 4Gib addressible limitation? Will the swap exceeding 4GiB always be a waste? is virtual memory equal to RAM and swap? or can virtual memory use space on the hard drive outside the swap partition? Thanks and regards!

  Read the article

• Backup Script - Could Not Open Input File

  - by Iestyn

  this is the backup script that I've got going: http://pastebin.com/4g4E6wUz This is the cron info: /usr/local/bin/php /home/backups/backup-db.php --filename-dated ALL No matter what I do, I keep on getting this error: Could not open input file: /home/backups/backup-db.php - That's the correct location of the file. I just don't know what else to try, I feel I've been working on this for so long now that I've explored every avenue, on the other hand sometimes I think that the time I've spent on it is clouding my thoughts and I'm missing something stupidly obvious. Just wondering if someone can give me a few pointers? Also on a last note, does anyone know of a way/article to auto generate a full backup of cPanel every * amount of days and store it in a location that I want? Kind Regards.

  Read the article

• Cannot access site via IP / hostname

  - by DaveB

  I am renting a VPS with Debian installed running JBoss AS6 for my web app. I recently had some problems with my DNS hosts as they messed up the A-records for my domain which caused some new A-records to be added by mistake The DNS problem is now sorted and the domain is working ok, however I noticed that the web server no longer responds via direct IP or hostname in a web browser (although it pings ok and I can SSH in using the hostname ok) Is there any explanation for this? I am using rinetd to forward traffic from 80 to port 8080 but thats been ok for a while Any suggestions would be appreciated Regards

  Read the article

• Hosting a web site at home: ISP Blocking port 80?

  - by tombull89

  Hello, I presume this is a better place to put this rather than server fault. I'm interested in setting up a small site to host at home as a "proof of concept" exercise, i.e. to prrove that I know how to do it. I've got a (virtual) server 2003 machine with a site on it, all configured with port forwarding through to 80 on my server. I have a Belkin F5D7634 which I have put my DYNDNS details in but when I try to go to my DYNDNS address it comes up with the page cannot be displayed. My ISP is Carphone Warehouse/AOL and I've been unable to find any information if they block port 80. If they do, can anybody reccomend a home provider that does not block port 80? Regards, Tom.

  Read the article

• Signal strength and Speed of wireless network

  - by Tim

  As shown by Lenovo Access Connections on my Windows 7, the wireless network I am using has a speed of 54.0Mbps but a signal strength of 88%. I am using WinSCP with unlimited speed to download files. WinSCP shows that the speed fluctuates between 100 and 120KiB/s. I was wondering what are the difference between the two speeds from Lenovo Access Connections and WinSCP? How can I tell the actual speed performance, for example, from the above measurements: speeds and the signal strength mentioned in the two places. Thanks and regards!

  Read the article

• unable to install mysql completely on debian 5.0

  - by austin powers

  hi, its been a couple of days that I'm trying to install mysql on my vps which has debian 5.0 with 256mb ram. I've installed webmin also. here is the symptoms : after installing mysql using either webmin or apt-get I am trying to connect to mysql for changing root password but every time I cope with this error : ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES) so I start to investigate and I understand there is no root user inside mysql database when I use : UPDATE user SET password=PASSWORD('newpassword') WHERE user="root"; it says 0 row affected I reinstall mysql for several times but the same problem still exits. please help me how can I install mysql-server as well as mysql-client correctly. regards.

  Read the article

• create log for an encrypted tar

  - by magiza83

  I want to create an encrypted tar but also I want to have a log of what tar has compressed, I'm using the following command: tar -cvvf - --files-from=/root/backup.cfg | openssl des3 -salt -k backuppass | dd of=/root/tmp/back.encrypted But I need to have a log of tar's stdout. I don't know how to get it, because If I use "" in tar command openssl result is not correct. I've also checked tar manual hoping to find some option to write stdout to a file, but I have found nothing. any help? thanks & Regards.

  Read the article

• Performance problems on RDC to our Terminal-Server Win2008 R2

  - by user40021

  Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

  Read the article

• Client side certificates in client browsers with unix server for management

  - by user146253

  We are currently running Unix dedicated servers for everything (Web cluster, database, FTP, batch, ...) except for a Microsoft Active Directory Certificate Services. The sole purpose of this Windows box is to provide client side certificates to our clients browsers. All our clients are required to install a client side certificate on order for them to be able to access our website. Is there an alternative in the Unix space? The purpose is to make sure only the approved hardware of an approved client can access our website. I'm open for any solution that provides me with this level of security. We are however talking about thousands of certified computers just so you can factor that in in a proposed solution. Optionally we would also like to be able to revoke access. With Regards.

  Read the article

• What are the minimum required modules to run WordPress

  - by Mister IT Guru

  Recently a 'consultant' came in to talk to bean counters at my place of employment, with regards to being more efficient with our IT infrastructure. They suggested to be more efficient we should only load the Apache modules that are required on our web servers. (This is just 1 of 1Ks of suggestions). The Bean Counters are very excited, and prepared for me to spend the time to investigate this avenue of cost cutting. I don't mind this mundane exercise, I see it as a learning experience! I guess this leads me to the actual question: How can I determine the minimum required apache modules for a PHP based application without actually going through the code, or plain old trial and error?

  Read the article

• AD Authentication fails in local machine but works from Production server

  - by jesu

  Hi i am using a AD authentication and facing 2 problems. Authentication works fine when i move the application to a production server but FAILS in my LOCAL machine. Both local machine and server are in same domain and used same domain account logging in. When the machine logs in the users with domain account , AD authentication from the application says that the account is not valid. Please suggest me , if you can find out the problem and ways to recover. thanks in advance! Regards jesu

  Read the article

• How to dual OS 32-bit/64-bit Windows 7 Ultimate.

  - by Cyril Horad

  I have a problem with regards to my nVidia driver not running on 64-bit. I decided to install both 32-bit and 64-bit on my ASUS K42JC (4GB RAM upgrade) in order to function the nVidia on the 32-bit. My question is, how could I make my laptop run on either 32-bit or 64-bit OS. What options I am suppose to use, a single, double, or triple partition? From an answer: Well. When I installed the nVidia driver from either the ASUS site and the prescribed driver from NVIDA site via System Requirements Lab, both ended up freezing my laptop to the point when the desktop is about the finish booting. I have tried three(3) times reformatting and trying to fix the problem. Yet no use. I filed a ticket to the Asus support but for now no replies yet. But this bothers me, why wouldn't the nVidia run on 64bit yet it runs perfectly on 32bit.

  Read the article

• What is this service called in English?

  - by moomoochoo

  DETAILS I'm not familiar with server administration and am trying to find the name of a particular service offered by a Japanese website provider. The service is for a dedicated server. I have attached a picture detailing the service below. The left side of the picture shows the server without the service. The right side shows the server with the service. Once I know the name of the service I will Google it, but any additional information in regards to the pros and cons of such a service would be much appreciated. Thanks! QUESTION What is the name of the service in the picture. What are the pros and cons of this service?

  Read the article

• Route multiple subdomains on one external ip to multiple internal ips

  - by Abenil

  i have several subdomains(git.example.org, build.example.org, etc.), i have a router with an external ip and i have several virtual machines on a host computer with internal ips. Now i want to route git.example.org to internal ip 10.0.2.1 and build.example.org to internal ip 10.0.2.2. How can I do this? I setup in the Router that all traffic on port 80 is comming to my host computer with internal ip 10.0.2.3 and installed Squid on that computer. I added the following lines to the squid.conf file: cache_peer 10.0.2.1 parent 80 0 no-query originserver name=server_1 cache_peer_domain server_1 git.example.org cache_peer 10.0.2.2 parent 80 0 no-query originserver name=server_2 cache_peer_domain server_2 build.example.org But this is not working for me. :( Any help appreciated. Regards Nils Update: Here is the solution for Apache http://serverfault.com/a/273693

  Read the article

• Port forwarding on D-Link DIR-615 super-slow, useless

  - by Jaroslav Záruba

  Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless. Accessing the router itself (admin UI) is without issues, no delay whatsoever. But when I try to access a service on another computer in the network the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine turning off firewall on the target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

  Read the article

• Help on using mod_rewrite to serve I18N static site

  - by Guandalino

  My static site www.example.com is translated in different languages and files are organized in this hierarchy: / /de index.html seite-1.html /en index.html page-1.html /it index.html pagina-1.html The root contains no files, just one subdirectory for each language the site is translated in, while subdirectories contain pages translated (both content and file name are) in the language corresponding to subdirectory name, de, en, it, etc. The question is: how to configure mod_rewrite so that when a client visits www.example.com it is taken to the correct version of the site, falling back to english version if the required locale is not supported (i.e. Accept-Language header doesn't exist or specifies a language for which the site is not available, e.g. fr)? Thanks for any pointer, I'm here to provide further details or feedback! Best regards

  Read the article

• W3c Markup Validator on Windows 2003 with Apache

  - by rihatum

  Hi All, OS = Windows 2003 (latest sp / hotfixes etc) Perl = Active Perl 5.8.9 Build 825 Apache 2.2.11 Followed the following How-To: http://validator.w3.org/docs/install_win.html Facing the following errors : (had an html error too, but I used Perl Package manager to upgrade the required package. Now, the Package manager isn't showing any update of the following package and some others too : SGML::Parser::OpenSP version 0.991 required--this is only version 0.99 at C:/www/validator/httpd/cgi-bin/check line 61. Q : How can I download the latest package for OpenSP ? Q : Would It be just a matter of click and install the package? If someone can provide a step by step that would be very helpful, I am not fluent with building perl packages. Thanks and Regards

  Read the article

• Entire filesystem restore from rdiff-backup snapshot

  - by atmosx

  I'm trying to make a complete system restore from an rdiff-backup. The cli for backing was: rdiff-backup --exclude-special-files --exclude /tmp --exclude /mnt --exclude /proc --exclude /sys / /mnt/backup/ebox/ I created a new partition mounted the partition at /mnt/gentoo and did: rdiff-backup -r /mnt/vol2 /mnt/gentoo However when I try to chroot to this system (following gentoo's manual, which means mounting /dev/ and /proc) I get the following error: chroot: failed to run command/bin/bash': No such file or directory` All this takes place on a Parallels (virtual machine) Debian installation. Any ideas on how to proceed in order to fully restore the system? Best Regards ps. /mnt/gentoo/bin/bash works fine if I execute it. All files and permissions are in place rdiff-backup seems to work just fine. However the system cannot neither boot (exits with kernel panic - cannot find init) or be chrooted.

  Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >