alt tab - Page 96 - Developer IT

switching between screens

- by user191622

I'm using GNU screen just recently. I'm wondering if there is an easier way to switch between screen. for example to map it to alt+left arrow and alt+right arrow ?

What is the shortcut for creating both braces?

- by TheLearner

In the Stanford course the lecturer uses some shortcut to create both braces when implementing a new method. I know in Visual Studio you use TAB TAB, what do you use in Xcode?

WDS DHCP same server on Windows Server 2008

I have been struggling with a problem on my Windows Server 2008 for the past 4 - 5 hours and cannot figure out whats wrong. I have tried pretty much everything that I found on google and all the links are purple. Hopefully you guys can help me. I am running a Windows Server 2008 Standard edition with the latest updates as of today. Furthermore I am running a Windows Server 2003. Both are virtual machines on my ESXi 5 server. My network is: 192.168.10.0/24 W2k8: 192.168.10.251 is the PDC running ADS, DHCP and WDS W2k3: 192.168.10.253 AND 192.168.1.175 running Routing and Remote Access and ISA 2006 Enterprise In my internal network (192.168.10.0/24) I have my client machine (192.168.10.10) that runs a VMWare Workstation. I am trying to deploy Windows 7 Home Premium to a virtual machine on my VMWorkstation via PXE. I have set the Workstation's VM network adapter to "bridged" so that it uses the physical network adapter and is connected to my internal network. The DHCP pool is configured to give IP addresses from 192.168.10.10-192.168.10.15 (works for normal clients and is not used up) When I start my VM with the PXE I get the error: PXE-E52:proxyDHCP offers were received. No DHCP offers were received Apperently this means "that means that WDS responded but the DHCP server did not." People suggested to direct the traffic to both WDS and DHCP on the router, since everything is on the same subnet there is no need for that as the broadcast is seen by everyone (WDS and DHCP) No reservation for the virtual mac addrs is made on the DHCP. Furthermore it was suggested to configure the DHCP options: Option 60= PXEClient Option 66= WDS server name or IP address Option 67= Boot file name However, this is not recommended by Microsoft, I tried it and it did not solve my problem. The configuration on the WDS (My System is German therefore the actual naming might be different): PXE response tab: PXE responses is set to "ALL (known and unknown)" DHCP Tab: Do not listen to port 67 is NOT ticked - if I tick this I do not get any responses and the PXE errors gets PXE-E51 that neither DHCP or proxyDHCP were received DHCP-Option 60 for "PXEClient" is ticked The confusing part here is that it is advised in the tab to tick the first option since it is on the same server. Network Configuration Tab: Use the following IP-Address range for Multicast-IP-Address: 224.0.1.0 - 224.0.10.0 Thats not the default one, however it is in the allowed range. The UDP port range is the default since it is not advised to change them. I tried to change the "networkprofile" from 100mbits/1gbits and custom. I am running a 1gbit network with CAT6 cables and 1gbit netgear switch 5 ports. Everything is configured to use 1gbit. The WDS is authorised for the DHCP server. My ISA 2006 configuration: For the internal networking i have configured the following policy array: Allow protocols on internal network including the w2k3 host: 67,68,53,ICMP, 4011 UDP receive, 64001-6500 UDP send receive, 69 UDP send Routing and Remote Access I tried the DHCP relay agent configuration that was suggested as well, but that did not work I would highly appreciate anykind of help because I am pretty much done here with my nerves. Thank you very much in advance.

Read the article

How to use Public IP in case of two ISP when two differs from each other

- by user1471995

Please bare with my long explanation but this is important to explain the actual problem. Please also pardon my knowledge with PFsense as i am new to this. I have single PFSense box with 3 Ethernet adapter. Before moving to configuration for these, i want to let you know i have two Ethernet based Internet Leased Line Connectivity let's call them ISP A and ISP B. Then last inetrface is LAN which is connected to network switch. Typical network diagram ISP A ----- PFSense ----> Switch ---- > Servers ISP B ----- ISP A (Initially Purchased) WAN IP:- 113.193.X.X /29 Gateway IP :- 113.193.X.A and other 4 usable public IP in same subnet(So the gateway for those IP are also same). ISP B (Recently Purchased) WAN IP:- 115.115.X.X /30 Gateway IP :- 115.115.X.B and other 5 usable public IP in different subnet(So the gateway for those IP is different), for example if 115.119.X.X2 is one of the IP from that list then the gateway for this IP is 115.119.X.X1. Configuration for 3 Interfaces Interface : WAN Network Port : nfe0 Type : Static IP Address : 113.193.X.X /29 Gateway : 113.193.X.A Interface : LAN Network Port : vr0 Type : Static IP Address : 192.168.1.1 /24 Gateway : None Interface : RELWAN Network Port : rl0 Type : Static IP Address : 115.115.X.X /30 (I am not sure of the subnet) Gateway : 115.115.X.B To use Public IP from ISP A i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- WAN TCP/UDP * * 113.193.X.X1 53 (DNS) 192.168.1.5 53 (DNS) WAN TCP/UDP * * 113.193.X.X1 80 (HTTP) 192.168.1.5 80 (HTTP) WAN TCP * * 113.193.X.X2 80 (HTTP) 192.168.1.7 80 (HTTP) etc., c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the WAN those are only present. d) If this section in relevant then for Firewall: Rules at WAN tab then following default rule has been generated. * RFC 1918 networks * * * * * Block private networks * Reserved/not assigned by IANA * * * * * * To use Public IP from ISP B i have done following steps a) Created Virtual IP using either ARP or IP Alias. b) Using Firewall: NAT: Port Forward i have created specific natting from one public IP to my internal Lan private IP for example :- RELWAN TCP/UDP * * 115.119.116.X.X1 80 (HTTP) 192.168.1.11 80 (HTTP) c) Current state for Firewall: NAT: Outbound is Manual and whatever default rule are defined for the RELWAN those are only present. d) If this section in relevant then for Firewall: Rules at RELWAN tab then following default rule has been generated. * RFC 1918 networks * * * * * * Reserved/not assigned by IANA * * * * * * Last thing before my actual query is to make you aware that to have multiple Wan setup i have done following steps a) Under System: Gateways at Groups Tab i have created new group as following MultipleGateway WANGW, RELWAN Tier 2,Tier 1 Multiple Gateway Test b) Then Under Firewall: Rules at LAN tab i have created a rule for internal traffic as follows * LAN net * * * MultipleGateway none c) This setup works if unplug first ISP traffic start routing using ISP 2 and vice-versa. Now my main query and problem is i am not able to use public IP address allocated by ISP B, i have tried many small tweaks but not successful in anyone. The notable difference between the two ISP is a) In case of ISP A there Public usable IP address are on same subnet so the gateway used for the WAN ip is same for the other public IP address. b) In case of ISP B there public usable IP address are on different subnet so the obvious the gateway IP for them is different from WAN gateway's IP. Please let me know how to use ISP B public usable IP address, in future also i am going to rely for more IPs from ISP B only.

Read the article

Convert from apache rewrite to nginx

- by Linux Intel

I want to convert from apache rewrite modules to nginx RewriteCond %{QUERY_STRING} mosConfig_[a-zA-Z_]{1,21}(=|\%3D) [OR] RewriteCond %{QUERY_STRING} base64_encode.*$.*$ [OR] RewriteCond %{QUERY_STRING} (\<|%3C).*script.*(\>|%3E) [NC,OR] RewriteCond %{QUERY_STRING} GLOBALS(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} _REQUEST(=|\[|\%[0-9A-Z]{0,2}) RewriteCond %{QUERY_STRING} SELECT(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} UNION(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteCond %{QUERY_STRING} UPDATE(=|\[|\%[0-9A-Z]{0,2}) [OR] RewriteRule ^([^.]*)/?$ index.php [L] RewriteRule ^domain/trial/cms$ index/index.php?%{QUERY_STRING} [L] RewriteCond %{HTTP:Range} ([a-z]+) [NC] RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteCond %{ENV:byte-ranges-specifier} !^$ RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteCond %{HTTP_USER_AGENT} !^Mozilla/5 [NC] RewriteCond %{HTTP_USER_AGENT} !^Mozilla/4 [NC] RewriteCond %{HTTP_USER_AGENT} !^Opera [NC] RewriteRule ([0-9_\-]+)flv$ http://www.domain.com [R,L] RewriteRule ^$ index/index.php?%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)$ sss.php?encrypted=$1&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)/([^/^.]*)$ sss.php?tab=$1&page=$2&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !m-administrator [NC] RewriteRule ^([^/^.]*)/([^/^.]*)/([^.]*)$ sss.php?tab=$1&page=$2&queryString=$3&%{QUERY_STRING} [L] RewriteCond %{SCRIPT_FILENAME} !sss.php [NC] RewriteCond %{SCRIPT_FILENAME} !security.php [NC] RewriteRule ^([^/]*)$ index/$1?%{QUERY_STRING} [L] I tried to convert it by online tools such as : http://www.anilcetin.com/convert-apache-htaccess-to-nginx/ but it didn't convert it correctly. The conversion output is : if ($args ~ "mosConfig_[a-zA-Z_]{1,21}(=|%3D)"){ set $rule_0 1; } if ($args ~ "base64_encode.*(.*)"){ set $rule_0 1; } if ($args ~* "(<|%3C).*script.*(>|%3E)"){ set $rule_0 1; } if ($args ~ "GLOBALS(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "_REQUEST(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "SELECT(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "UNION(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($args ~ "UPDATE(=|[|%[0-9A-Z]{0,2})"){ set $rule_0 1; } if ($rule_0 = "1"){ rewrite ^/([^.]*)/?$ /index.php last; } if ($rule_1 = ""){ rewrite ^/domain/trial/cms$ /index/index.php?$args last; } if ($http_range ~* "([a-z]+)"){ set $rule_2 1$rule_2; } if ($rule_2 = "1"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } #ignored: condition 0 if ($rule_3 = "1"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } if ($http_user_agent !~* "^Mozilla/5"){ set $rule_4 1$rule_4; } if ($http_user_agent !~* "^Mozilla/4"){ set $rule_4 2$rule_4; } if ($http_user_agent !~* "^Opera"){ set $rule_4 3$rule_4; } if ($rule_4 = "321"){ rewrite /([0-9_-]+)flv$ http://www.domain.com redirect; } if ($rule_5 = ""){ rewrite ^/$ /index/index.php?$args last; } if ($uri !~* "sss.php"){ set $rule_6 1$rule_6; } if ($uri !~* "m-administrator"){ set $rule_6 2$rule_6; } if ($rule_6 = "21"){ rewrite ^/([^/^.]*)$ /sss.php?encrypted=$1&$args last; } if ($uri !~* "sss.php"){ set $rule_7 1$rule_7; } if ($uri !~* "m-administrator"){ set $rule_7 2$rule_7; } if ($rule_7 = "21"){ rewrite ^/([^/^.]*)/([^/^.]*)$ /sss.php?tab=$1&page=$2&$args last; } if ($uri !~* "sss.php"){ set $rule_8 1$rule_8; } if ($uri !~* "m-administrator"){ set $rule_8 2$rule_8; } if ($rule_8 = "21"){ rewrite ^/([^/^.]*)/([^/^.]*)/([^.]*)$ /sss.php?tab=$1&page=$2&queryString=$3&$args last; } if ($uri !~* "sss.php"){ set $rule_9 1$rule_9; } if ($uri !~* "security.php"){ set $rule_9 2$rule_9; } if ($rule_9 = "21"){ rewrite ^/([^/]*)$ /index/$1?$args last; } Please help me with the proper conversion result for nginx in order to work perfectly.

Read the article

Building applications with WCF - Intro

- by skjagini

I am going to write series of articles using Windows Communication Framework (WCF) to develop client and server applications and this is the first part of that series. What is WCF As Juwal puts in his Programming WCF book, WCF provides an SDK for developing and deploying services on Windows, provides runtime environment to expose CLR types as services and consume services as CLR types. Building services with WCF is incredibly easy and it’s implementation provides a set of industry standards and off the shelf plumbing including service hosting, instance management, reliability, transaction management, security etc such that it greatly increases productivity Scenario: Lets consider a typical bank customer trying to create an account, deposit amount and transfer funds between accounts, i.e. checking and savings. To make it interesting, we are going to divide the functionality into multiple services and each of them working with database directly. We will run test cases with and without transactional support across services. In this post we will build contracts, services, data access layer, unit tests to verify end to end communication etc, nothing big stuff here and we dig into other features of the WCF in subsequent posts with incremental changes. In any distributed architecture we have two pieces i.e. services and clients. Services as the name implies provide functionality to execute various pieces of business logic on the server, and clients providing interaction to the end user. Services can be built with Web Services or with WCF. Service built on WCF have the advantage of binding independent, i.e. can run against TCP and HTTP protocol without any significant changes to the code. Solution Services Profile: For creating a new bank customer, getting details about existing customer ProfileContract ProfileService Checking Account: To get checking account balance, deposit or withdraw amount CheckingAccountContract CheckingAccountService Savings Account: To get savings account balance, deposit or withdraw amount SavingsAccountContract SavingsAccountService ServiceHost: To host services, i.e. running the services at particular address, binding and contract where client can connect to Client: Helps end user to use services like creating account and amount transfer between the accounts BankDAL: Data access layer to work with database BankDAL It’s no brainer not to use an ORM as many matured products are available currently in market including Linq2Sql, Entity Framework (EF), LLblGenPro etc. For this exercise I am going to use Entity Framework 4.0, CTP 5 with code first approach. There are two approaches when working with data, data driven and code driven. In data driven we start by designing tables and their constrains in database and generate entities in code while in code driven (code first) approach entities are defined in code and the metadata generated from the entities is used by the EF to create tables and table constrains. In previous versions the entity classes had to derive from EF specific base classes. In EF 4 it is not required to derive from any EF classes, the entities are not only persistence ignorant but also enable full test driven development using mock frameworks. Application consists of 3 entities, Customer entity which contains Customer details; CheckingAccount and SavingsAccount to hold the respective account balance. We could have introduced an Account base class for CheckingAccount and SavingsAccount which is certainly possible with EF mappings but to keep it simple we are just going to follow 1 –1 mapping between entity and table mappings. Lets start out by defining a class called Customer which will be mapped to Customer table, observe that the class is simply a plain old clr object (POCO) and has no reference to EF at all. using System; namespace BankDAL.Model { public class Customer { public int Id { get; set; } public string FullName { get; set; } public string Address { get; set; } public DateTime DateOfBirth { get; set; } } } In order to inform EF about the Customer entity we have to define a database context with properties of type DbSet<> for every POCO which needs to be mapped to a table in database. EF uses convention over configuration to generate the metadata resulting in much less configuration. using System.Data.Entity; namespace BankDAL.Model { public class BankDbContext: DbContext { public DbSet<Customer> Customers { get; set; } } } Entity constrains can be defined through attributes on Customer class or using fluent syntax (no need to muscle with xml files), CustomerConfiguration class. By defining constrains in a separate class we can maintain clean POCOs without corrupting entity classes with database specific information. using System; using System.Data.Entity.ModelConfiguration; namespace BankDAL.Model { public class CustomerConfiguration: EntityTypeConfiguration<Customer> { public CustomerConfiguration() { Initialize(); } private void Initialize() { //Setting the Primary Key this.HasKey(e => e.Id); //Setting required fields this.HasRequired(e => e.FullName); this.HasRequired(e => e.Address); //Todo: Can't create required constraint as DateOfBirth is not reference type, research it //this.HasRequired(e => e.DateOfBirth); } } } Any queries executed against Customers property in BankDbContext are executed against Cusomers table. By convention EF looks for connection string with key of BankDbContext when working with the context. We are going to define a helper class to work with Customer entity with methods for querying, adding new entity etc and these are known as repository classes, i.e., CustomerRepository using System; using System.Data.Entity; using System.Linq; using BankDAL.Model; namespace BankDAL.Repositories { public class CustomerRepository { private readonly IDbSet<Customer> _customers; public CustomerRepository(BankDbContext bankDbContext) { if (bankDbContext == null) throw new ArgumentNullException(); _customers = bankDbContext.Customers; } public IQueryable<Customer> Query() { return _customers; } public void Add(Customer customer) { _customers.Add(customer); } } } From the above code it is observable that the Query methods returns customers as IQueryable i.e. customers are retrieved only when actually used i.e. iterated. Returning as IQueryable also allows to execute filtering and joining statements from business logic using lamba expressions without cluttering the data access layer with tens of methods. Our CheckingAccountRepository and SavingsAccountRepository look very similar to each other using System; using System.Data.Entity; using System.Linq; using BankDAL.Model; namespace BankDAL.Repositories { public class CheckingAccountRepository { private readonly IDbSet<CheckingAccount> _checkingAccounts; public CheckingAccountRepository(BankDbContext bankDbContext) { if (bankDbContext == null) throw new ArgumentNullException(); _checkingAccounts = bankDbContext.CheckingAccounts; } public IQueryable<CheckingAccount> Query() { return _checkingAccounts; } public void Add(CheckingAccount account) { _checkingAccounts.Add(account); } public IQueryable<CheckingAccount> GetAccount(int customerId) { return (from act in _checkingAccounts where act.CustomerId == customerId select act); } } } The repository classes look very similar to each other for Query and Add methods, with the help of C# generics and implementing repository pattern (Martin Fowler) we can reduce the repeated code. Jarod from ElegantCode has posted an article on how to use repository pattern with EF which we will implement in the subsequent articles along with WCF Unity life time managers by Drew Contracts It is very easy to follow contract first approach with WCF, define the interface and append ServiceContract, OperationContract attributes. IProfile contract exposes functionality for creating customer and getting customer details. using System; using System.ServiceModel; using BankDAL.Model; namespace ProfileContract { [ServiceContract] public interface IProfile { [OperationContract] Customer CreateCustomer(string customerName, string address, DateTime dateOfBirth); [OperationContract] Customer GetCustomer(int id); } } ICheckingAccount contract exposes functionality for working with checking account, i.e., getting balance, deposit and withdraw of amount. ISavingsAccount contract looks the same as checking account. using System.ServiceModel; namespace CheckingAccountContract { [ServiceContract] public interface ICheckingAccount { [OperationContract] decimal? GetCheckingAccountBalance(int customerId); [OperationContract] void DepositAmount(int customerId,decimal amount); [OperationContract] void WithdrawAmount(int customerId, decimal amount); } } Services Having covered the data access layer and contracts so far and here comes the core of the business logic, i.e. services. .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } ProfileService implements the IProfile contract for creating customer and getting customer detail using CustomerRepository. using System; using System.Linq; using System.ServiceModel; using BankDAL; using BankDAL.Model; using BankDAL.Repositories; using ProfileContract; namespace ProfileService { [ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class Profile: IProfile { public Customer CreateAccount( string customerName, string address, DateTime dateOfBirth) { Customer cust = new Customer { FullName = customerName, Address = address, DateOfBirth = dateOfBirth }; using (var bankDbContext = new BankDbContext()) { new CustomerRepository(bankDbContext).Add(cust); bankDbContext.SaveChanges(); } return cust; } public Customer CreateCustomer(string customerName, string address, DateTime dateOfBirth) { return CreateAccount(customerName, address, dateOfBirth); } public Customer GetCustomer(int id) { return new CustomerRepository(new BankDbContext()).Query() .Where(i => i.Id == id).FirstOrDefault(); } } } From the above code you shall observe that we are calling bankDBContext’s SaveChanges method and there is no save method specific to customer entity because EF manages all the changes centralized at the context level and all the pending changes so far are submitted in a batch and it is represented as Unit of Work. Similarly Checking service implements ICheckingAccount contract using CheckingAccountRepository, notice that we are throwing overdraft exception if the balance falls by zero. WCF has it’s own way of raising exceptions using fault contracts which will be explained in the subsequent articles. SavingsAccountService is similar to CheckingAccountService. using System; using System.Linq; using System.ServiceModel; using BankDAL.Model; using BankDAL.Repositories; using CheckingAccountContract; namespace CheckingAccountService { [ServiceBehavior(IncludeExceptionDetailInFaults = true)] public class Checking:ICheckingAccount { public decimal? GetCheckingAccountBalance(int customerId) { using (var bankDbContext = new BankDbContext()) { CheckingAccount account = (new CheckingAccountRepository(bankDbContext) .GetAccount(customerId)).FirstOrDefault(); if (account != null) return account.Balance; return null; } } public void DepositAmount(int customerId, decimal amount) { using(var bankDbContext = new BankDbContext()) { var checkingAccountRepository = new CheckingAccountRepository(bankDbContext); CheckingAccount account = (checkingAccountRepository.GetAccount(customerId)) .FirstOrDefault(); if (account == null) { account = new CheckingAccount() { CustomerId = customerId }; checkingAccountRepository.Add(account); } account.Balance = account.Balance + amount; if (account.Balance < 0) throw new ApplicationException("Overdraft not accepted"); bankDbContext.SaveChanges(); } } public void WithdrawAmount(int customerId, decimal amount) { DepositAmount(customerId, -1*amount); } } } BankServiceHost The host acts as a glue binding contracts with it’s services, exposing the endpoints. The services can be exposed either through the code or configuration file, configuration file is preferred as it allows run time changes to service behavior even after deployment. We have 3 services and for each of the service you need to define name (the class that implements the service with fully qualified namespace) and endpoint known as ABC, i.e. address, binding and contract. We are using netTcpBinding and have defined the base address with for each of the contracts .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } <system.serviceModel> <services> <service name="ProfileService.Profile"> <endpoint binding="netTcpBinding" contract="ProfileContract.IProfile"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1000/Profile"/> </baseAddresses> </host> </service> <service name="CheckingAccountService.Checking"> <endpoint binding="netTcpBinding" contract="CheckingAccountContract.ICheckingAccount"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1000/Checking"/> </baseAddresses> </host> </service> <service name="SavingsAccountService.Savings"> <endpoint binding="netTcpBinding" contract="SavingsAccountContract.ISavingsAccount"/> <host> <baseAddresses> <add baseAddress="net.tcp://localhost:1000/Savings"/> </baseAddresses> </host> </service> </services> </system.serviceModel> Have to open the services by creating service host which will handle the incoming requests from clients. using System; namespace ServiceHost { class Program { static void Main(string[] args) { CreateHosts(); Console.ReadLine(); } private static void CreateHosts() { CreateHost(typeof(ProfileService.Profile),"Profile Service"); CreateHost(typeof(SavingsAccountService.Savings), "Savings Account Service"); CreateHost(typeof(CheckingAccountService.Checking), "Checking Account Service"); } private static void CreateHost(Type type, string hostDescription) { System.ServiceModel.ServiceHost host = new System.ServiceModel.ServiceHost(type); host.Open(); if (host.ChannelDispatchers != null && host.ChannelDispatchers.Count != 0 && host.ChannelDispatchers[0].Listener != null) Console.WriteLine("Started: " + host.ChannelDispatchers[0].Listener.Uri); else Console.WriteLine("Failed to start:" + hostDescription); } } } BankClient The client has no knowledge about service business logic other than the functionality it exposes through the contract, end points and a proxy to work against. The endpoint data and server proxy can be generated by right clicking on the project reference and choosing ‘Add Service Reference’ and entering the service end point address. Or if you have access to source, you can manually reference contract dlls and update clients configuration file to point to the service end point if the server and client happens to be being built using .Net framework. One of the pros with the manual approach is you don’t have to work against messy code generated files. <system.serviceModel> <client> <endpoint name="tcpProfile" address="net.tcp://localhost:1000/Profile" binding="netTcpBinding" contract="ProfileContract.IProfile"/> <endpoint name="tcpCheckingAccount" address="net.tcp://localhost:1000/Checking" binding="netTcpBinding" contract="CheckingAccountContract.ICheckingAccount"/> <endpoint name="tcpSavingsAccount" address="net.tcp://localhost:1000/Savings" binding="netTcpBinding" contract="SavingsAccountContract.ISavingsAccount"/> </client> </system.serviceModel> The client uses a façade to connect to the services using System.ServiceModel; using CheckingAccountContract; using ProfileContract; using SavingsAccountContract; namespace Client { public class ProxyFacade { public static IProfile ProfileProxy() { return (new ChannelFactory<IProfile>("tcpProfile")).CreateChannel(); } public static ICheckingAccount CheckingAccountProxy() { return (new ChannelFactory<ICheckingAccount>("tcpCheckingAccount")) .CreateChannel(); } public static ISavingsAccount SavingsAccountProxy() { return (new ChannelFactory<ISavingsAccount>("tcpSavingsAccount")) .CreateChannel(); } } } With that in place, lets get our unit tests going using System; using System.Diagnostics; using BankDAL.Model; using NUnit.Framework; using ProfileContract; namespace Client { [TestFixture] public class Tests { private void TransferFundsFromSavingsToCheckingAccount(int customerId, decimal amount) { ProxyFacade.CheckingAccountProxy().DepositAmount(customerId, amount); ProxyFacade.SavingsAccountProxy().WithdrawAmount(customerId, amount); } private void TransferFundsFromCheckingToSavingsAccount(int customerId, decimal amount) { ProxyFacade.SavingsAccountProxy().DepositAmount(customerId, amount); ProxyFacade.CheckingAccountProxy().WithdrawAmount(customerId, amount); } [Test] public void CreateAndGetProfileTest() { IProfile profile = ProxyFacade.ProfileProxy(); const string customerName = "Tom"; int customerId = profile.CreateCustomer(customerName, "NJ", new DateTime(1982, 1, 1)).Id; Customer customer = profile.GetCustomer(customerId); Assert.AreEqual(customerName,customer.FullName); } [Test] public void DepositWithDrawAndTransferAmountTest() { IProfile profile = ProxyFacade.ProfileProxy(); string customerName = "Smith" + DateTime.Now.ToString("HH:mm:ss"); var customer = profile.CreateCustomer(customerName, "NJ", new DateTime(1982, 1, 1)); // Deposit to Savings ProxyFacade.SavingsAccountProxy().DepositAmount(customer.Id, 100); ProxyFacade.SavingsAccountProxy().DepositAmount(customer.Id, 25); Assert.AreEqual(125, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); // Withdraw ProxyFacade.SavingsAccountProxy().WithdrawAmount(customer.Id, 30); Assert.AreEqual(95, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); // Deposit to Checking ProxyFacade.CheckingAccountProxy().DepositAmount(customer.Id, 60); ProxyFacade.CheckingAccountProxy().DepositAmount(customer.Id, 40); Assert.AreEqual(100, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); // Withdraw ProxyFacade.CheckingAccountProxy().WithdrawAmount(customer.Id, 30); Assert.AreEqual(70, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); // Transfer from Savings to Checking TransferFundsFromSavingsToCheckingAccount(customer.Id,10); Assert.AreEqual(85, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); Assert.AreEqual(80, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); // Transfer from Checking to Savings TransferFundsFromCheckingToSavingsAccount(customer.Id, 50); Assert.AreEqual(135, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customer.Id)); Assert.AreEqual(30, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customer.Id)); } [Test] public void FundTransfersWithOverDraftTest() { IProfile profile = ProxyFacade.ProfileProxy(); string customerName = "Angelina" + DateTime.Now.ToString("HH:mm:ss"); var customerId = profile.CreateCustomer(customerName, "NJ", new DateTime(1972, 1, 1)).Id; ProxyFacade.SavingsAccountProxy().DepositAmount(customerId, 100); TransferFundsFromSavingsToCheckingAccount(customerId,80); Assert.AreEqual(20, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customerId)); Assert.AreEqual(80, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customerId)); try { TransferFundsFromSavingsToCheckingAccount(customerId,30); } catch (Exception e) { Debug.WriteLine(e.Message); } Assert.AreEqual(110, ProxyFacade.CheckingAccountProxy().GetCheckingAccountBalance(customerId)); Assert.AreEqual(20, ProxyFacade.SavingsAccountProxy().GetSavingsAccountBalance(customerId)); } } } We are creating a new instance of the channel for every operation, we will look into instance management and how creating a new instance of channel affects it in subsequent articles. The first two test cases deals with creation of Customer, deposit and withdraw of month between accounts. The last case, FundTransferWithOverDraftTest() is interesting. Customer starts with depositing $100 in SavingsAccount followed by transfer of $80 in to checking account resulting in $20 in savings account. Customer then initiates $30 transfer from Savings to Checking resulting in overdraft exception on Savings with $30 being deposited to Checking. As we are not running both the requests in transactions the customer ends up with more amount than what he started with $100. In subsequent posts we will look into transactions handling. Make sure the ServiceHost project is set as start up project and start the solution. Run the test cases either from NUnit client or TestDriven.Net/Resharper which ever is your favorite tool. Make sure you have updated the data base connection string in the ServiceHost config file to point to your local database

Read the article

Quick guide to Oracle IRM 11g: Configuring SSL

- by Simon Thorpe

Quick guide to Oracle IRM 11g index So far in this guide we have an IRM Server up and running, however I skipped over SSL configuration in the previous article because I wanted to focus in more detail now. You can, if you wish, not bother with setting up SSL, but considering this is a security technology it is worthwhile doing. Contents Setting up a one way, self signed SSL certificate in WebLogic Setting up an official SSL certificate in Apache 2.x Configuring Apache to proxy traffic to the IRM server There are two common scenarios in which an Oracle IRM server is configured. For a development or evaluation system, people usually communicate directly to the WebLogic Server running the IRM service. However in a production environment and for some proof of concept evaluations that require a setup reflecting a production system, the traffic to the IRM server travels via a web server proxy, commonly Apache. In this guide we are building an Oracle Enterprise Linux based IRM service and this article will go over the configuration of SSL in WebLogic and also in Apache. Like in the past articles, we are going to use two host names in the configuration below,irm.company.com will refer to the public Apache server irm.company.internal will refer to the internal WebLogic IRM server Setting up a one way, self signed SSL certificate in WebLogic First lets look at creating just a simple self signed SSL certificate to be used in WebLogic. This is a quick and easy way to get SSL working in your environment, however the downside is that no browsers are going to trust this certificate you create and you'll need to manually install the certificate onto any machine's communicating with the server. This is fine for development or when you have only a few users evaluating the system, but for any significant use it's usually better to have a fully trusted certificate in use and I explain that in the next section. But for now lets go through creating, installing and testing a self signed certificate. We use a library in Java to create the certificates, open a console and running the following commands. Note you should choose your own secure passwords whenever you see password below. [oracle@irm /] source /oracle/middleware/wlserver_10.3/server/bin/setWLSEnv.sh [oracle@irm /] cd /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/ [oracle@irm /] java utils.CertGen -selfsigned -certfile MyOwnSelfCA.cer -keyfile MyOwnSelfKey.key -keyfilepass password -cn "irm.oracle.demo" [oracle@irm /] java utils.ImportPrivateKey -keystore MyOwnIdentityStore.jks -storepass password -keypass password -alias trustself -certfile MyOwnSelfCA.cer.pem -keyfile MyOwnSelfKey.key.pem -keyfilepass password [oracle@irm /] keytool -import -trustcacerts -alias trustself -keystore TrustMyOwnSelf.jks -file MyOwnSelfCA.cer.der -keyalg RSA We now have two Java Key Stores, MyOwnIdentityStore.jks and TrustMyOwnSelf.jks. These contain keys and certificates which we will use in WebLogic Server. Now we need to tell the IRM server to use these stores when setting up SSL connections for incoming requests. Make sure the Admin server is running and login into the WebLogic Console at http://irm.company.intranet:7001/console and do the following; In the menu on the left, select the + next to Environment to expose the submenu, then click on Servers. You will see two servers in the list, AdminServer(admin) and IRM_server1. If the IRM server is running, shut it down either by hitting CONTROL + C in the console window it was started from, or you can switch to the CONTROL tab, select IRM_server1 and then select the Shutdown menu and then Force Shutdown Now. In the Configuration tab select IRM_server1 and switch to the Keystores tab. By default WebLogic Server uses it's own demo identity and trust. We are now going to switch to the self signed one's we've just created. So select the Change button and switch to Custom Identity and Custom Trust and hit save. Now we have to complete the resulting fields, the setting's i've used in my evaluation server are below. IdentityCustom Identity Keystore: /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/MyOwnIdentityStore.jks Custom Identity Keystore Type: JKS Custom Identity Keystore Passphrase: password Confirm Custom Identity Keystore Passphrase: password TrustCustom Trust Keystore: /oracle/middleware/user_projects/domains/irm_domain/config/fmwconfig/TrustMyOwnSelf.jks Custom Trust Keystore Type: JKS Custom Trust Keystore Passphrase: password Confirm Custom Trust Keystore Passphrase: password Now click on the SSL tab for the IRM_server1 and enter in the alias and passphrase, in my demo here the details are; IdentityPrivate Key Alias: trustself Private Key Passphrase: password Confirm Private Key Passphrase: password And hit save. Now lets test a connection to the IRM server over HTTPS using SSL. Go back to a console window and start the IRM server, a quick reminder on how to do this is... [oracle@irm /] cd /oracle/middleware/user_projects/domains/irm_domain/bin [oracle@irm /] ./startManagedWeblogic IRM_server1 Once running, open a browser and head to the SSL port of the server. By default the IRM server will be listening on the URL https://irm.company.intranet:16101/irm_rights. Note in the example image on the right the port is 7002 because it's a system that has the IRM services installed on the Admin server, this isn't typical (or advisable). Your system is going to have a separate managed server which will be listening on port 16101. Once you open this address you will notice that your browser is going to complain that the server certificate is untrusted. The images on the right show how Firefox displays this error. You are going to be prompted every time you create a new SSL session with the server, both from the browser and more annoyingly from the IRM Desktop. If you plan on always using a self signed certificate, it is worth adding it to the Windows certificate store so that when you are accessing sealed content you do not keep being informed this certificate is not trusted. Follow these instructions (which are for Internet Explorer 8, they may vary for your version of IE.) Start Internet Explorer and open the URL to your IRM server over SSL, e.g. https://irm.company.intranet:16101/irm_rights. IE will complain that about the certificate, click on Continue to this website (not recommended). From the IE Tools menu select Internet Options and from the resulting dialog select Security and then click on Trusted Sites and then the Sites button. Add to the list of trusted sites a URL which mates the server you are accessing, e.g. https://irm.company.intranet/ and select OK. Now refresh the page you were accessing and next to the URL you should see a red cross and the words Certificate Error. Click on this button and select View Certificates. You will now see a dialog with the details of the self signed certificate and the Install Certificate... button should be enabled. Click on this to start the wizard. Click next and you'll be asked where you should install the certificate. Change the option to Place all certificates in the following store. Select browse and choose the Trusted Root Certification Authorities location and hit OK. You'll then be prompted to install the certificate and answer yes. You also need to import the root signed certificate into the same location, so once again select the red Certificate Error option and this time when viewing the certificate, switch to the Certification Path tab and you should see a CertGenCAB certificate. Select this and then click on View Certificate and go through the same process as above to import the certificate into the store. Finally close all instances of the IE browser and re-access the IRM server URL again, this time you should not receive any errors. Setting up an official SSL certificate in Apache 2.x At this point we now have an IRM server that you can communicate with over SSL. However this certificate isn't trusted by any browser because it's path of trust doesn't end in a recognized certificate authority (CA). Also you are communicating directly to the WebLogic Server over a non standard SSL port, 16101. In a production environment it is common to have another device handle the initial public internet traffic and then proxy this to the WebLogic server. The diagram below shows a very simplified view of this type of deployment. What i'm going to walk through next is configuring Apache to proxy traffic to a WebLogic server and also to use a real SSL certificate from an official CA. First step is to configure Apache to handle incoming requests over SSL. In this guide I am configuring the IRM service in Oracle Enterprise Linux 5 update 3 and Apache 2.2.3 which came with OpenSSL and mod_ssl components. Before I purchase an SSL certificate, I need to generate a certificate request from the server. Oracle.com uses Verisign and for my own personal needs I use cheaper certificates from GoDaddy. The following instructions are specific to Apache, but there are many references out there for other web servers. For Apache I have OpenSSL and the commands are; [oracle@irm /] cd /usr/bin [oracle@irm bin] openssl genrsa -des3 -out irm-apache-server.key 2048 Generating RSA private key, 2048 bit long modulus ............................+++ .........+++ e is 65537 (0x10001) Enter pass phrase for irm-apache-server.key: Verifying - Enter pass phrase for irm-apache-server.key: [oracle@irm bin] openssl req -new -key irm-apache-server.key -out irm-apache-server.csr Enter pass phrase for irm-apache-server.key: You are about to be asked to enter information that will be incorporated into your certificate request. What you are about to enter is what is called a Distinguished Name or a DN. There are quite a few fields but you can leave some blank For some fields there will be a default value, If you enter '.', the field will be left blank. ----- Country Name (2 letter code) [GB]:US State or Province Name (full name) [Berkshire]:CA Locality Name (eg, city) [Newbury]:San Francisco Organization Name (eg, company) [My Company Ltd]:Oracle Organizational Unit Name (eg, section) []:Security Common Name (eg, your name or your server's hostname) []:irm.company.com Email Address []:[email protected] Please enter the following 'extra' attributes to be sent with your certificate request A challenge password []:testing An optional company name []: You must make sure to remember the pass phrase you used in the initial key generation, you will need this when later configuring Apache. In the /usr/bin directory there are now two new files. The irm-apache-server.csr contains our certificate request and is what you cut and paste, or upload, to your certificate authority when you purchase and validate your SSL certificate. In response you will typically get two files. Your server certificate and another certificate file that will likely contain a set of certificates from your CA which validate your certificate's trust. Next we need to configure Apache to use these files. Typically there is an ssl.conf file which is where all the SSL configuration is done. On my Oracle Enterprise Linux server this file is located in /etc/httpd/conf.d/ssl.conf and i've added the following lines. <VirtualHost irm.company.com> # Setup SSL for irm.company.com ServerName irm.company.com SSLEngine On SSLCertificateFile /oracle/secure/irm.company.com.crt SSLCertificateKeyFile /oracle/secure/irm.company.com.key SSLCertificateChainFile /oracle/secure/gd_bundle.crt </VirtualHost> Restarting Apache (apachectl restart) and I can now attempt to connect to the Apache server in a web browser, https://irm.company.com/. If all is configured correctly I should now see an Apache test page delivered to me over HTTPS. Configuring Apache to proxy traffic to the IRM server Final piece in setting up SSL is to have Apache proxy requests for the IRM server but do so securely. So the requests to Apache will be over HTTPS using a legitimate certificate, but we can also configure Apache to proxy these requests internally across to the IRM server using SSL with the self signed certificate we generated at the start of this article. To do this proxying we use the WebLogic Web Server plugin for Apache which you can download here from Oracle. Download the zip file and extract onto the server. The file extraction reveals a set of zip files, each one specific to a supported web server. In my instance I am using Apache 2.2 32bit on an Oracle Enterprise Linux, 64 bit server. If you are not sure what version your Apache server is, run the command /usr/sbin/httpd -V and you'll see version and it its 32 or 64 bit. Mine is a 32bit server so I need to extract the file WLSPlugin1.1-Apache2.2-linux32-x86.zip. The from the resulting lib folder copy the file mod_wl.so into /usr/lib/httpd/modules/. First we want to test that the plug in will work for regular HTTP traffic. Edit the httpd.conf for Apache and add the following section at the bottom. LoadModule weblogic_module modules/mod_wl.so <IfModule mod_weblogic.c> WebLogicHost irm.company.internal WebLogicPort 16100 WLLogFile /tmp/wl-proxy.log </IfModule> <Location /irm_rights> SetHandler weblogic-handler </Location> <Location /irm_desktop> SetHandler weblogic-handler </Location> <Location /irm_sealing> SetHandler weblogic-handler </Location> <Location /irm_services> SetHandler weblogic-handler </Location> Now restart Apache again (apachectl restart) and now open a browser to http://irm.company.com/irm_rights. Apache will proxy the HTTP traffic from the port 80 of your Apache server to the IRM service listening on port 16100 of the WebLogic Managed server. Note above I have included all four of the Locations you might wish to proxy. http://irm.company.internalirm_rights is the URL to the management website, /irm_desktop is the URL used for the IRM Desktop to communicate. irm_sealing is for web services based document sealing and irm_services is for IRM server web services. The last two are typically only used when you have the IRM server integrated with another application and it is unlikely you'd be accessing these resources from the public facing Apache server. However, just in case, i've mentioned them above. Now let's enable SSL communication from Apache to WebLogic. In the ZIP file we extracted were some more modules we need to copy into the Apache folder. Looking back in the lib that we extracted, there are some more files. Copy the following into the /usr/lib/httpd/modules/ folder. libwlssl.so libnnz11.so libclntsh.so.11.1 Now the documentation states that should only need to do this, but I found that I also needed to create an environment variable called LD_LIBRARY_PATH and point this to the folder /usr/lib/httpd/modules/. If I didn't do this, starting Apache with the WebLogic module configured to SSL would throw the error. [crit] (20014)Internal error: WL SSL Init failed for server: (null) on 0 So I had to edit the file /etc/profile and add the following lines at the bottom. You may already have the LD_LIBRARY_PATH variable defined, therefore simply add this path to it. LD_LIBRARY_PATH=/usr/lib/httpd/modules/ export LD_LIBRARY_PATH Now the WebLogic plug in uses an Oracle Wallet to store the required certificates.You'll need to copy the self signed certificate from the IRM server over to the Apache server. Copy over the MyOwnSelfCA.cer.der into the same folder where you are storing your public certificates, in my example this is /oracle/secure. It's worth mentioning these files should ONLY be readable by root (the user Apache runs as). Now lets create an Oracle Wallet and import the self signed certificate from the IRM server. The file orapki was included in the bin folder of the Apache 1.1 plugin zip you extracted. orapki wallet create -wallet /oracle/secure/my-wallet -auto_login_only orapki wallet add -wallet /oracle/secure/my-wallet -trusted_cert -cert MyOwnSelfCA.cer.der -auto_login_only Finally change the httpd.conf to reflect that we want the WebLogic Apache plug-in to use HTTPS/SSL and not just plain HTTP. <IfModule mod_weblogic.c> WebLogicHost irm.company.internal WebLogicPort 16101 SecureProxy ON WLSSLWallet /oracle/secure/my-wallet WLLogFile /tmp/wl-proxy.log </IfModule> Then restart Apache once more and you can go back to the browser to test the communication. Opening the URL https://irm.company.com/irm_rights will proxy your request to the WebLogic server at https://irm.company.internal:16101/irm_rights. At this point you have a fully functional Oracle IRM service, the next step is to create a sealed document and test the entire system.

Read the article

Simple MSBuild Configuration: Updating Assemblies With A Version Number

- by srkirkland

When distributing a library you often run up against versioning problems, once facet of which is simply determining which version of that library your client is running. Of course, each project in your solution has an AssemblyInfo.cs file which provides, among other things, the ability to set the Assembly name and version number. Unfortunately, setting the assembly version here would require not only changing the version manually for each build (depending on your schedule), but keeping it in sync across all projects. There are many ways to solve this versioning problem, and in this blog post I’m going to try to explain what I think is the easiest and most flexible solution. I will walk you through using MSBuild to create a simple build script, and I’ll even show how to (optionally) integrate with a Team City build server. All of the code from this post can be found at https://github.com/srkirkland/BuildVersion. Create CommonAssemblyInfo.cs The first step is to create a common location for the repeated assembly info that is spread across all of your projects. Create a new solution-level file (I usually create a Build/ folder in the solution root, but anywhere reachable by all your projects will do) called CommonAssemblyInfo.cs. In here you can put any information common to all your assemblies, including the version number. An example CommonAssemblyInfo.cs is as follows: using System.Reflection; using System.Resources; using System.Runtime.InteropServices; [assembly: AssemblyCompany("University of California, Davis")] [assembly: AssemblyProduct("BuildVersionTest")] [assembly: AssemblyCopyright("Scott Kirkland & UC Regents")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyTrademark("")] [assembly: ComVisible(false)] [assembly: AssemblyVersion("1.2.3.4")] //Will be replaced [assembly: NeutralResourcesLanguage("en-US")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Cleanup AssemblyInfo.cs & Link CommonAssemblyInfo.cs For each of your projects, you’ll want to clean up your assembly info to contain only information that is unique to that assembly – everything else will go in the CommonAssemblyInfo.cs file. For most of my projects, that just means setting the AssemblyTitle, though you may feel AssemblyDescription is warranted. An example AssemblyInfo.cs file is as follows: using System.Reflection; [assembly: AssemblyTitle("BuildVersionTest")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Next, you need to “link” the CommonAssemblyinfo.cs file into your projects right beside your newly lean AssemblyInfo.cs file. To do this, right click on your project and choose Add | Existing Item from the context menu. Navigate to your CommonAssemblyinfo.cs file but instead of clicking Add, click the little down-arrow next to add and choose “Add as Link.” You should see a little link graphic similar to this: We’ve actually reduced complexity a lot already, because if you build all of your assemblies will have the same common info, including the product name and our static (fake) assembly version. Let’s take this one step further and introduce a build script. Create an MSBuild file What we want from the build script (for now) is basically just to have the common assembly version number changed via a parameter (eventually to be passed in by the build server) and then for the project to build. Also we’d like to have a flexibility to define what build configuration to use (debug, release, etc). In order to find/replace the version number, we are going to use a Regular Expression to find and replace the text within your CommonAssemblyInfo.cs file. There are many other ways to do this using community build task add-ins, but since we want to keep it simple let’s just define the Regular Expression task manually in a new file, Build.tasks (this example taken from the NuGet build.tasks file). <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <UsingTask TaskName="RegexTransform" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll"> <ParameterGroup> <Items ParameterType="Microsoft.Build.Framework.ITaskItem[]" /> </ParameterGroup> <Task> <Using Namespace="System.IO" /> <Using Namespace="System.Text.RegularExpressions" /> <Using Namespace="Microsoft.Build.Framework" /> <Code Type="Fragment" Language="cs"> <![CDATA[ foreach(ITaskItem item in Items) { string fileName = item.GetMetadata("FullPath"); string find = item.GetMetadata("Find"); string replaceWith = item.GetMetadata("ReplaceWith"); if(!File.Exists(fileName)) { Log.LogError(null, null, null, null, 0, 0, 0, 0, String.Format("Could not find version file: {0}", fileName), new object[0]); } string content = File.ReadAllText(fileName); File.WriteAllText( fileName, Regex.Replace( content, find, replaceWith ) ); } ]]> </Code> </Task> </UsingTask> </Project> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If you glance at the code, you’ll see it’s really just going a Regex.Replace() on a given file, which is exactly what we need. Now we are ready to write our build file, called (by convention) Build.proj. <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildProjectDirectory)\Build.tasks" /> <PropertyGroup> <Configuration Condition="'$(Configuration)' == ''">Debug</Configuration> <SolutionRoot>$(MSBuildProjectDirectory)</SolutionRoot> </PropertyGroup> <ItemGroup> <RegexTransform Include="$(SolutionRoot)\CommonAssemblyInfo.cs"> <Find>(?<major>\d+)\.(?<minor>\d+)\.\d+\.(?<revision>\d+)</Find> <ReplaceWith>$(BUILD_NUMBER)</ReplaceWith> </RegexTransform> </ItemGroup> <Target Name="Go" DependsOnTargets="UpdateAssemblyVersion; Build"> </Target> <Target Name="UpdateAssemblyVersion" Condition="'$(BUILD_NUMBER)' != ''"> <RegexTransform Items="@(RegexTransform)" /> </Target> <Target Name="Build"> <MSBuild Projects="$(SolutionRoot)\BuildVersionTest.sln" Targets="Build" /> </Target> </Project> Reviewing this MSBuild file, we see that by default the “Go” target will be called, which in turn depends on “UpdateAssemblyVersion” and then “Build.” We go ahead and import the Bulid.tasks file and then setup some handy properties for setting the build configuration and solution root (in this case, my build files are in the solution root, but we might want to create a Build/ directory later). The rest of the file flows logically, we setup the RegexTransform to match version numbers such as <major>.<minor>.1.<revision> (1.2.3.4 in our example) and replace it with a $(BUILD_NUMBER) parameter which will be supplied externally. The first target, “UpdateAssemblyVersion” just runs the RegexTransform, and the second target, “Build” just runs the default MSBuild on our solution. Testing the MSBuild file locally Now we have a build file which can replace assembly version numbers and build, so let’s setup a quick batch file to be able to build locally. To do this you simply create a file called Build.cmd and have it call MSBuild on your Build.proj file. I’ve added a bit more flexibility so you can specify build configuration and version number, which makes your Build.cmd look as follows: set config=%1 if "%config%" == "" ( set config=debug ) set version=%2 if "%version%" == "" ( set version=2.3.4.5 ) %WINDIR%\Microsoft.NET\Framework\v4.0.30319\msbuild Build.proj /p:Configuration="%config%" /p:build_number="%version%" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now if you click on the Build.cmd file, you will get a default debug build using the version 2.3.4.5. Let’s run it in a command window with the parameters set for a release build version 2.0.1.453. Excellent! We can now run one simple command and govern the build configuration and version number of our entire solution. Each DLL produced will have the same version number, making determining which version of a library you are running very simple and accurate. Configure the build server (TeamCity) Of course you are not really going to want to run a build command manually every time, and typing in incrementing version numbers will also not be ideal. A good solution is to have a computer (or set of computers) act as a build server and build your code for you, providing you a consistent environment, excellent reporting, and much more. One of the most popular Build Servers is JetBrains’ TeamCity, and this last section will show you the few configuration parameters to use when setting up a build using your MSBuild file created earlier. If you are using a different build server, the same principals should apply. First, when setting up the project you want to specify the “Build Number Format,” often given in the form <major>.<minor>.<revision>.<build>. In this case you will set major/minor manually, and optionally revision (or you can use your VCS revision number with %build.vcs.number%), and then build using the {0} wildcard. Thus your build number format might look like this: 2.0.1.{0}. During each build, this value will be created and passed into the $BUILD_NUMBER variable of our Build.proj file, which then uses it to decorate your assemblies with the proper version. After setting up the build number, you must choose MSBuild as the Build Runner, then provide a path to your build file (Build.proj). After specifying your MSBuild Version (equivalent to your .NET Framework Version), you have the option to specify targets (the default being “Go”) and additional MSBuild parameters. The one parameter that is often useful is manually setting the configuration property (/p:Configuration="Release") if you want something other than the default (which is Debug in our example). Your resulting configuration will look something like this: [Under General Settings] [Build Runner Settings] Now every time your build is run, a newly incremented build version number will be generated and passed to MSBuild, which will then version your assemblies and build your solution. A Quick Review Our goal was to version our output assemblies in an automated way, and we accomplished it by performing a few quick steps: Move the common assembly information, including version, into a linked CommonAssemblyInfo.cs file Create a simple MSBuild script to replace the common assembly version number and build your solution Direct your build server to use the created MSBuild script That’s really all there is to it. You can find all of the code from this post at https://github.com/srkirkland/BuildVersion. Enjoy!

Read the article

Introducing Data Annotations Extensions

- by srkirkland

Validation of user input is integral to building a modern web application, and ASP.NET MVC offers us a way to enforce business rules on both the client and server using Model Validation. The recent release of ASP.NET MVC 3 has improved these offerings on the client side by introducing an unobtrusive validation library built on top of jquery.validation. Out of the box MVC comes with support for Data Annotations (that is, System.ComponentModel.DataAnnotations) and can be extended to support other frameworks. Data Annotations Validation is becoming more popular and is being baked in to many other Microsoft offerings, including Entity Framework, though with MVC it only contains four validators: Range, Required, StringLength and Regular Expression. The Data Annotations Extensions project attempts to augment these validators with additional attributes while maintaining the clean integration Data Annotations provides. A Quick Word About Data Annotations Extensions The Data Annotations Extensions project can be found at http://dataannotationsextensions.org/, and currently provides 11 additional validation attributes (ex: Email, EqualTo, Min/Max) on top of Data Annotations’ original 4. You can find a current list of the validation attributes on the afore mentioned website. The core library provides server-side validation attributes that can be used in any .NET 4.0 project (no MVC dependency). There is also an easily pluggable client-side validation library which can be used in ASP.NET MVC 3 projects using unobtrusive jquery validation (only MVC3 included javascript files are required). On to the Preview Let’s say you had the following “Customer” domain model (or view model, depending on your project structure) in an MVC 3 project: public class Customer { public string Email { get; set; } public int Age { get; set; } public string ProfilePictureLocation { get; set; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } When it comes time to create/edit this Customer, you will probably have a CustomerController and a simple form that just uses one of the Html.EditorFor() methods that the ASP.NET MVC tooling generates for you (or you can write yourself). It should look something like this: With no validation, the customer can enter nonsense for an email address, and then can even report their age as a negative number! With the built-in Data Annotations validation, I could do a bit better by adding a Range to the age, adding a RegularExpression for email (yuck!), and adding some required attributes. However, I’d still be able to report my age as 10.75 years old, and my profile picture could still be any string. Let’s use Data Annotations along with this project, Data Annotations Extensions, and see what we can get: public class Customer { [Email] [Required] public string Email { get; set; } [Integer] [Min(1, ErrorMessage="Unless you are benjamin button you are lying.")] [Required] public int Age { get; set; } [FileExtensions("png|jpg|jpeg|gif")] public string ProfilePictureLocation { get; set; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now let’s try to put in some invalid values and see what happens: That is very nice validation, all done on the client side (will also be validated on the server). Also, the Customer class validation attributes are very easy to read and understand. Another bonus: Since Data Annotations Extensions can integrate with MVC 3’s unobtrusive validation, no additional scripts are required! Now that we’ve seen our target, let’s take a look at how to get there within a new MVC 3 project. Adding Data Annotations Extensions To Your Project First we will File->New Project and create an ASP.NET MVC 3 project. I am going to use Razor for these examples, but any view engine can be used in practice. Now go into the NuGet Extension Manager (right click on references and select add Library Package Reference) and search for “DataAnnotationsExtensions.” You should see the following two packages: The first package is for server-side validation scenarios, but since we are using MVC 3 and would like comprehensive sever and client validation support, click on the DataAnnotationsExtensions.MVC3 project and then click Install. This will install the Data Annotations Extensions server and client validation DLLs along with David Ebbo’s web activator (which enables the validation attributes to be registered with MVC 3). Now that Data Annotations Extensions is installed you have all you need to start doing advanced model validation. If you are already using Data Annotations in your project, just making use of the additional validation attributes will provide client and server validation automatically. However, assuming you are starting with a blank project I’ll walk you through setting up a controller and model to test with. Creating Your Model In the Models folder, create a new User.cs file with a User class that you can use as a model. To start with, I’ll use the following class: public class User { public string Email { get; set; } public string Password { get; set; } public string PasswordConfirm { get; set; } public string HomePage { get; set; } public int Age { get; set; } } Next, create a simple controller with at least a Create method, and then a matching Create view (note, you can do all of this via the MVC built-in tooling). Your files will look something like this: UserController.cs: public class UserController : Controller { public ActionResult Create() { return View(new User()); } [HttpPost] public ActionResult Create(User user) { if (!ModelState.IsValid) { return View(user); } return Content("User valid!"); } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Create.cshtml: @model NuGetValidationTester.Models.User @{ ViewBag.Title = "Create"; } <h2>Create</h2> <script src="@Url.Content("~/Scripts/jquery.validate.min.js")" type="text/javascript"></script> <script src="@Url.Content("~/Scripts/jquery.validate.unobtrusive.min.js")" type="text/javascript"></script> @using (Html.BeginForm()) { @Html.ValidationSummary(true) <fieldset> <legend>User</legend> @Html.EditorForModel() <p> <input type="submit" value="Create" /> </p> </fieldset> } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } In the Create.cshtml view, note that we are referencing jquery validation and jquery unobtrusive (jquery is referenced in the layout page). These MVC 3 included scripts are the only ones you need to enjoy both the basic Data Annotations validation as well as the validation additions available in Data Annotations Extensions. These references are added by default when you use the MVC 3 “Add View” dialog on a modification template type. Now when we go to /User/Create we should see a form for editing a User Since we haven’t yet added any validation attributes, this form is valid as shown (including no password, email and an age of 0). With the built-in Data Annotations attributes we can make some of the fields required, and we could use a range validator of maybe 1 to 110 on Age (of course we don’t want to leave out supercentenarians) but let’s go further and validate our input comprehensively using Data Annotations Extensions. The new and improved User.cs model class. { [Required] [Email] public string Email { get; set; } [Required] public string Password { get; set; } [Required] [EqualTo("Password")] public string PasswordConfirm { get; set; } [Url] public string HomePage { get; set; } [Integer] [Min(1)] public int Age { get; set; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now let’s re-run our form and try to use some invalid values: All of the validation errors you see above occurred on the client, without ever even hitting submit. The validation is also checked on the server, which is a good practice since client validation is easily bypassed. That’s all you need to do to start a new project and include Data Annotations Extensions, and of course you can integrate it into an existing project just as easily. Nitpickers Corner ASP.NET MVC 3 futures defines four new data annotations attributes which this project has as well: CreditCard, Email, Url and EqualTo. Unfortunately referencing MVC 3 futures necessitates taking an dependency on MVC 3 in your model layer, which may be unadvisable in a multi-tiered project. Data Annotations Extensions keeps the server and client side libraries separate so using the project’s validation attributes don’t require you to take any additional dependencies in your model layer which still allowing for the rich client validation experience if you are using MVC 3. Custom Error Message and Globalization: Since the Data Annotations Extensions are build on top of Data Annotations, you have the ability to define your own static error messages and even to use resource files for very customizable error messages. Available Validators: Please see the project site at http://dataannotationsextensions.org/ for an up-to-date list of the new validators included in this project. As of this post, the following validators are available: CreditCard Date Digits Email EqualTo FileExtensions Integer Max Min Numeric Url Conclusion Hopefully I’ve illustrated how easy it is to add server and client validation to your MVC 3 projects, and how to easily you can extend the available validation options to meet real world needs. The Data Annotations Extensions project is fully open source under the BSD license. Any feedback would be greatly appreciated. More information than you require, along with links to the source code, is available at http://dataannotationsextensions.org/. Enjoy!

Read the article

What other tool is using my hotkey?

- by Sammy

I use Greenshot for screenshots, and it's been nagging about some other software tool using the same hotkey. I started receiving this warning message about two days ago. It shows up each time I reboot and log on to Windows. The hotkey(s) "Ctrl + Shift + PrintScreen" could not be registered. This problem is probably caused by another tool claiming usage of the same hotkey(s)! You could either change your hotkey settings or deactivate/change the software making use of the hotkey(s). What's this all about? The only software I recently installed is CPU-Z Core Temp Speed Fan HD Tune Epson Print CD NetStress What I would like to know is how to find out what other tool is causing this conflict? Do I really have to uninstall each program, one by one, until there is no conflict anymore? I see no option for customizing any hotkeys in CPU-Z, and according to docs there are only a few keyboard shortcuts. These are F5 through F9, but they are no hotkeys. There is nothing in Core Temp, and from what I can see... nothing in Speed Fan. Is any of these programs known to use Ctrl + Shift + PrintScreen hotkey for screenshots? I am actually suspecting the Dropbox client. I think I saw a warning recently coming from Dropbox program, something to do with hotkeys or keyboard shortcuts. I see that it has an option for sharing screenshots under Preferences menu, but I see no option for hotkeys. Core Temp actually also has an option for taking screenshots (F9) but it's just that - a keyboard shortcut, not a hotkey. And again, there's no option actually for changing this setting in Options/Settings menu. How do you resolve this type of conflicts? Are there any general methods you can use to pinpoint the second conflicting software? Like... is there some Windows registry key that holds the hotkeys? Or is it just down to mere luck and trial and error? Addendum I forgot to mention, when I do use the Ctrl + Shift + PrintScreen hotkey, what happens is that the Greenshot context menu shows up, asking me where I want to save the screenshot. So it appears to be working. But I am still getting the darn warning every time I reboot and log on to Windows?! I actually tried changing the key bindings in Greenshot preferences, but after a reboot it seems to have returned back to the settings I had previously. Update I can't see any hotkey conflicts in the Widnows Hotkey Explorer. The aforementioned hotkey is reserved by Greenshot, and I don't see any other program using the same hotkey binding. But when I went into Greenshot preferences, this is what I discovered. As you can see it's the Greenshot itself that uses the same hotkey twice! I guess that's why no other program was listed above as using this hotkey. But how can Greenshot be so stupid to use the same hotkey more than once? I didn't do this! It's not my fault... I'm not that stupid. This is what it's set to right now: Capture full screen: Ctrl + Skift + Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Skift + Prntscrn Capture Internet Explorer: Ctrl + Skift + Prntscrn And this is my preferred setting: Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn Capture last region: Capture Internet Explorer: I don't use any hotkey for "last region" and IE. But when I set this to my liking, as listed here, Greenshot gives me the same warning message, even as I tab through the hotkey entry fields. Sometimes it even gives me the warning when I just click Cancel button. This is really crazy! On the side note... You might have noticed that I have "update check" set to 0 (zero). This is because, in my experience, Greenshot changes all or only some of my preferences back to default settings whenever it automatically updates to a new version. So I opted to stay off updates to get rid of the problem. It has done so for the past three updates or so. I hoped to receive a new update that would fix the issue, but I think it still reverts back to default settings after each update to a new version, including setting default hotkeys. Update 2 I'll give you just one example of how Greenshot behaves. This is the dialog I have in front of me right now. As you can see, I have removed the last two hotkeys and changed the first one to my own liking. While I was clicking in the fields and removing the two hotkeys I was getting the warning message. So let's say I click in the "capture last region" field. Then I get this: Note that none of the entries include "Ctrl + Shift + PrintScreen" that it's warning about. Now I will change all the hotkeys so I get something like this: So now I'm using QWERTY letters for binding, like Ctrl+Alt+Q, Ctrl+Alt+W and so on. As far as I know no Windows program is using these. While I was clicking through the different fields it was giving me the warning. Now when I try to click OK to save the changes, it once again gives me a warning about "ctrl + shift + printscreen". Update 3 After setting the above key bindings (QWERTY) and saving changes, and then rebooting, the conflict seems to have been resolved. I was then able to set following key bindings. Capture full screen: Prntscrn Capture window: Alt + Prntscrn Capture region: Ctrl + Prntscrn I was not prompted with the warning message this time. Perhaps changing key binding required a system reboot? Sounds far fetched but that appears to be the case. I'm still not sure what caused this conflict, but I know for sure that it started after installing aforementioned programs. It might just have to do with Greenshot itself, and not some other program. Like I said, I know from experience that Greenshot likes to mess with users' settings after each update. I wouldn't be surprised if it was actually silently updated, even though I have specified not to check for updates, then it changed the key bindings back to defaults and caused a conflict with the hotkeys that were registered with the operating system previously. I rarely reboot the system, so that could have added to the conflict. Next time if I see this I will run Hotkey Explorer immediately and see if there is another program causing the conflict.

Read the article

Ajax Control Toolkit December 2013 Release

- by Stephen.Walther

Today, we released a new version of the Ajax Control Toolkit that contains several important bug fixes and new features. The new release contains a new Tabs control that has been entirely rewritten in jQuery. You can download the December 2013 release of the Ajax Control Toolkit at http://Ajax.CodePlex.com. Alternatively, you can install the latest version directly from NuGet: The Ajax Control Toolkit and jQuery The Ajax Control Toolkit now contains two controls written with jQuery: the ToggleButton control and the Tabs control. The goal is to rewrite the Ajax Control Toolkit to use jQuery instead of the Microsoft Ajax Library gradually over time. The motivation for rewriting the controls in the Ajax Control Toolkit to use jQuery is to modernize the toolkit. We want to continue to accept new controls written for the Ajax Control Toolkit contributed by the community. The community wants to use jQuery. We want to make it easy for the community to submit bug fixes. The community understands jQuery. Using the Ajax Control Toolkit with a Website that Already uses jQuery But what if you are already using jQuery in your website? Will adding the Ajax Control Toolkit to your website break your existing website? No, and here is why. The Ajax Control Toolkit uses jQuery.noConflict() to avoid conflicting with an existing version of jQuery in a page. The version of jQuery that the Ajax Control Toolkit uses is represented by a variable named actJQuery. You can use actJQuery side-by-side with an existing version of jQuery in a page without conflict.Imagine, for example, that you add jQuery to an ASP.NET page using a <script> tag like this: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="TestACTDec2013.WebForm1" %> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <script src="Scripts/jquery-2.0.3.min.js"></script> <ajaxToolkit:ToolkitScriptManager runat="server" /> <ajaxToolkit:TabContainer runat="server"> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 1 </HeaderTemplate> <ContentTemplate> <h1>First Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> <ajaxToolkit:TabPanel runat="server"> <HeaderTemplate> Tab 2 </HeaderTemplate> <ContentTemplate> <h1>Second Tab</h1> </ContentTemplate> </ajaxToolkit:TabPanel> </ajaxToolkit:TabContainer> </div> </form> </body> </html> The page above uses the Ajax Control Toolkit Tabs control (TabContainer and TabPanel controls). The Tabs control uses the version of jQuery that is currently bundled with the Ajax Control Toolkit (jQuery version 1.9.1). The page above also includes a <script> tag that references jQuery version 2.0.3. You might need that particular version of jQuery, for example, to use a particular jQuery plugin. The two versions of jQuery in the page do not create a conflict. This fact can be demonstrated by entering the following two commands in the JavaScript console window: actJQuery.fn.jquery $.fn.jquery Typing actJQuery.fn.jquery will display the version of jQuery used by the Ajax Control Toolkit and typing $.fn.jquery (or jQuery.fn.jquery) will show the version of jQuery used by other jQuery plugins in the page. Preventing jQuery from Loading Twice So by default, the Ajax Control Toolkit will not conflict with any existing version of jQuery used in your application. However, this does mean that if you are already using jQuery in your application then jQuery will be loaded twice. For performance reasons, you might want to avoid loading the jQuery library twice. By taking advantage of the <remove> element in the AjaxControlToolkit.config file, you can prevent the Ajax Control Toolkit from loading its version of jQuery. <ajaxControlToolkit> <scripts> <remove name="jQuery.jQuery.js" /> </scripts> <controlBundles> <controlBundle> <control name="TabContainer" /> <control name="TabPanel" /> </controlBundle> </controlBundles> </ajaxControlToolkit> Be careful here: the name of the script being removed – jQuery.jQuery.js – is case-sensitive. If you remove jQuery then it is your responsibility to add the exact same version of jQuery back into your application. You can add jQuery back using a <script> tag like this: <script src="Scripts/jquery-1.9.1.min.js"></script> Make sure that you add the <script> tag before the server-side <form> tag or the Ajax Control Toolkit won’t detect the presence of jQuery. Alternatively, you can use the ToolkitScriptManager like this: <ajaxToolkit:ToolkitScriptManager runat="server"> <Scripts> <asp:ScriptReference Name="jQuery.jQuery.js" /> </Scripts> </ajaxToolkit:ToolkitScriptManager> The Ajax Control Toolkit is tested against the particular version of jQuery that is bundled with the Ajax Control Toolkit. Currently, the Ajax Control Toolkit uses jQuery version 1.9.1. If you attempt to use a different version of jQuery with the Ajax Control Toolkit then you will get the exception jQuery 1.9.1 is required in your JavaScript console window: If you need to use a different version of jQuery in the same page as the Ajax Control Toolkit then you should not use the <remove> element. Instead, allow the Ajax Control Toolkit to load its version of jQuery side-by-side with the other version of jQuery. Lots of Bug Fixes As usual, we implemented several important bug fixes with this release. The bug fixes concerned the following three controls: Tabs control – In the course of rewriting the Tabs control to use jQuery, we fixed several bugs related to the Tabs control. AjaxFileUpload control – We resolved an issue concerning the AjaxFileUpload and the TMP directory. HTMLEditor control – We updated the HTMLEditor control to use the new Ajax Control Toolkit bundling and minification framework. Summary I would like to thank the Superexpert team for their hard work on this release. Many long hours of coding and testing went into making this release possible.

Read the article

OCR anything with OneNote 2007 and 2010

- by Matthew Guay

Quality OCR software can often be very expensive, but you may have one already installed on your computer that you didn’t know about. Here’s how you can use OneNote to OCR anything on your computer. OneNote is one of the overlooked gems in recent versions of Microsoft Office. OneNote makes it simple to take notes and keep track of everything with integrated search, and offers more features than its popular competitor Evernote. One way it is better is its high quality optical character recognition (OCR) engine. One of Evernote’s most popular features is that you can search for anything, including text in an image, and you can easily find it. OneNote takes this further, and instantly OCRs any text in images you add. Then, you can use this text easily and copy it from the image. Let’s see how this works and how you can use OneNote as the ultimate OCR. Please Note: This feature is available in OneNote 2007 and 2010. OneNote 2007 is included with Office 2007 Home and Student, Enterprise, and Ultimate, while OneNote 2010 is included with all edition of Office 2010 except for Starter edition. OCR anything First, let’s add something to OCR into OneNote. There are many different ways you can add items to OCR into OneNote. Open a blank page or one you want to insert something into, and then follow these steps to add what you want into OneNote. Picture Simply drag-and-drop a picture with text into a notebook… You can insert a picture directly from OneNote as well. In OneNote 2010, select the Insert tab, and then choose Picture. In OneNote 2007, select the Insert menu, select Picture, and then choose From File. Screen Clipping There are many times we’d like to copy text from something we see onscreen, but there is no direct way to copy text from that thing. For instance, you cannot copy text from the title-bar of a window, or from a flash-based online presentation. For these cases, the Screen Clipping option is very useful. To add a clip of anything onscreen in OneNote 2010, select the Insert tab in the ribbon and click Screen Clipping. In OneNote 2007, either click the Clip button on the toolbar or select the Insert menu and choose Screen Clipping. Alternately, you can take a screen clipping by pressing the windows key + S. When you click Screen Clipping, OneNote will minimize, your desktop will fade lighter, and your mouse pointer will change to a plus sign. Now, click and drag over anything you want to add to OneNote. Here we’re selecting the title of this article. The section you selected will now show up in your OneNote notebook, complete with the date and time the clip was made. Insert a file You’re not limited to pictures; OneNote can even OCR anything in most files on your computer. You can add files directly in OneNote 2010 by selecting File Printout in the Insert tab. In OneNote 2007, select the Insert menu and choose Files as Printout. Choose the file you want to add to OneNote in the dialog. Select Insert, and OneNote will pause momentarily as it processes the file. Now your file will show up in OneNote as a printout with a link to the original file above it. You can also send any file directly to OneNote via the OneNote virtual printer. If you have a file open, such as a PDF, that you’d like to OCR, simply open the print dialog in that program and select the “Send to OneNote” printer. Or, if you have a scanner, you can scan documents directly into OneNote by clicking Scanner Printout in the Insert tab in OneNote 2010. In OneNote 2003, to add a scanned document select the Insert menu, select Picture, and then choose From Scanner or Camera. OCR the image, file, or screenshot you put in OneNote Now that you’ve got your stuff into OneNote, let’s put it to work. OneNote automatically did an OCR scan on anything you inserted into OneNote. You can check to make sure by right-clicking on any picture, screenshot, or file you inserted. Select “Make Text in Image Searchable” and then make sure the correct language is selected. Now, you can copy text from the Picture. Simply right-click on the picture, and select “Copy Text from Picture”. And here’s the text that OneNote found in this picture: OCR anything with OneNote 2007 and 2010 - Windows Live Writer Not bad, huh? Now you can paste the text from the picture into a document or anywhere you need to use the text. If you are instead copying text from a printout, it may give you the option to copy text from this page or all pages of the printout. This works the exact same in OneNote 2007. In OneNote 2010, you can also edit the text OneNote has saved in the image from the OCR. This way, if OneNote read something incorrectly you can change it so you can still find it when you use search in OneNote. Additionally, you can copy only a specific portion of the text from the edit box, so it can be useful just for general copying as well. To do this, right-click on the item and select “Edit Alt Text”. Here is the window to edit alternate text. If you want to copy only a portion of the text, simply select it and press Ctrl+C to copy that portion. Searching OneNote’s OCR engine is very useful for finding specific pictures you have saved in OneNote. Simply enter your search query in the search box on top right, and OneNote will automatically find all instances of that term in all of your notebooks. Notice how it highlights the search term even in the image! This works the same in OneNote 2007. Notice how it highlighted “How-to” in a shot of the header image in our favorite website. In Windows Vista and 7, you can even search for things OneNote OCRed from the Start Menu search. Here the start menu search found the words “Windows Live Writer” in our OCR Test notebook in OneNote where we inserted the screen clip above. Conclusion OneNote is a very useful OCR tool, and can help you capture text from just about anything. Plus, since you can easily search everything you have stored in OneNote, you can quickly find anything you insert anytime. OneNote is one of the least-used Office tools, but we have found it very useful and hope you do too. Similar Articles Productive Geek Tips Add or Remove Apps from the Microsoft Office 2007 or 2010 SuiteRemove Office 2010 Beta and Reinstall Office 2007How To Create and Publish Blog Posts in Word 2010 & 2007How To Copy Worksheets in Excel 2007 & 2010Add Page Numbers to Documents in Word 2007 & 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers

Read the article

Using TypeScript in ASP.NET MVC Projects

- by shiju

In the previous blog post Microsoft TypeScript : A Typed Superset of JavaScript, I have given a brief introduction on TypeScript. In this post, I will demonstrate how to use TypeScript with ASP.NET MVC projects and how we can compile TypeScript within the ASP.NET MVC projects. Using TypeScript with ASP.NET MVC 3 Projects The Visual Studio plug-in for TypeScript provides an ASP.NET MVC 3 project template for TypeScript that lets you to compile TypeScript from the Visual Studio. The following screen shot shows the TypeScript template for ASP.NET MVC 3 project The “TypeScript Internet Application” template is just a ASP.NET MVC 3 internet application project template which will allows to compile TypeScript programs to JavaScript when you are building your ASP.NET MVC projects. This project template will have the following section in the .csproject file <None Include="Scripts\jquery.d.ts" /> <TypeScriptCompile Include="Scripts\site.ts" /> <Content Include="Scripts\site.js"> <DependentUpon>site.ts</DependentUpon> </Content> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } <Target Name="BeforeBuild"> <Exec Command="&quot;$(PROGRAMFILES)\ Microsoft SDKs\TypeScript\0.8.0.0\tsc&quot; @(TypeScriptCompile ->'"%(fullpath)"', ' ')" /> </Target> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The “BeforeBuild” target will allows you to compile TypeScript programs when you are building your ASP.NET MVC projects. The TypeScript project template will provide a typing reference file for the jQuery library named “jquery.d.ts”. The following default app.ts file referenced to jquery.d.ts 1: ///<reference path='jquery.d.ts' /> 2: 3: $(document).ready(function () { 4: 5: $(".btn-slide").click(function () { 6: $("#main").slideToggle("slow"); 7: $(this).toggleClass("active"); 8: }); 9: 10: }); .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Using TypeScript with ASP.NET MVC 4 Projects The current preview version of TypeScript is not providing a project template for ASP.NET MVC 4 projects. But you can use TypeScript with ASP.NET MVC 4 projects by editing the project’s .csproject file. You can take the necessary settings from ASP.NET MVC 3 project file. I have just added the following section in the end of the .csproj file of a ASP.NET MVC 4 project, which will allows to compile all TypeScript when building ASP.NET MVC 4 project. <ItemGroup> <TypeScriptCompile Include="$(ProjectDir)\**\*.ts" /> </ItemGroup> <Target Name="BeforeBuild"> <Exec Command="&quot;$(PROGRAMFILES)\ Microsoft SDKs\TypeScript\0.8.0.0\tsc&quot; @(TypeScriptCompile ->'"%(fullpath)"', ' ')" /> </Target> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }

Read the article

Oracle Enhances Oracle Social Cloud with Next-Generation User Experience

- by Richard Lefebvre

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Today’s enterprise must meet the technology standards of today’s consumer. According to a recent IDG Enterprise report, enterprises that invest in consumerized, easy-to-use technologies experience a 56 percent increase in employee productivity and a 46 percent increase in customer satisfaction. In order to deliver that simple and intuitive experience across even the most advanced social management capabilities, Oracle today introduced Social Station, an innovative new workspace within Oracle Social Cloud’s Social Relationship Management (SRM) platform. With Social Station, users benefit from a personalized and intuitive user experience that helps increase both the productivity and performance of social business practices. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} News Facts Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle today introduced Social Station, an innovative new workspace within Oracle Social Cloud’s Social Relationship Management (SRM) platform that helps organizations socially enable the way they do business. With an advanced yet intuitive user interface, Social Station delivers a compelling user experience that improves productivity and helps users more easily deliver on social objectives. To help users quickly and easily build out and configure their social workspaces, Social Station provides drag-and-drop capabilities that allow users to personalize their workspace with different social modules. With a new Custom Analytics module that mixes and matches more than 120 metrics with thousands of customizable reporting options, users can customize their view of social data and access constantly refreshed updates that support real-time understanding. One-click sharing capabilities and annotation functionality within the new Custom Analytics module also drives productivity by improving sharing and collaboration across teams, departments, and executives. Multiview layout capabilities further allows visibility into social insights by offering users the flexibility to monitor conversations by network, stream, metric, graph type, date range, and relative time period. Social Station also includes an Enhanced Calendar module that provides a clear visual representation of content, posts, networks, and views, helping users easily and efficiently understand information and toggle between various functions and views. To support different user personas and social business needs, Oracle plans to continue building out Social Station with additional modules, including content curation, influencer engagement, and command center creation. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

Reading php generated XML in flash?

- by AdonisSMU

Here is part 1 of our problem (Loading a dynamically generated XML file as PHP in Flash). Now we were able to get Flash to read the XML file, but we can only see the Flash render correctly when tested(test movie) from the actual Flash program. However, when we upload our files online to preview the Flash does not render correctly, missing some vital information(thumbnails, titles, video etc..). Here is a link to the Flash file using a manually created XML file (The Flash renders correctly): http://www.gaban.com/stackoverflow/TEN_xml.html Here is the path to the manually created XML file: http://dev.touchstorm.com/ten_hpn_admin2/client_user2.xml Now here is the link to the Flash file using the PHP generated XML file (Renders incomplete): http://www.gaban.com/stackoverflow/TEN_php.html Path to the PHP generated file (exactly the same as the manually created one): http://dev.touchstorm.com/ten_hpn_admin2/client_user.php?id=2 Additional information: The SWF file exists on Domain 1 The XML & PHP file both exists on Domain 2 And the HTML file with the embed code lies on Domain 3 Wondering if this could be a crossdomain issue? We have one of those files in place on Domain 1 & 2 where we have access too, however for Domain 3 we can't have a crossdomain.xml file there. Here is the PHP code: $xml = new XMLWriter(); $xml->openMemory(); $xml->setIndent(true); $xml->setIndentString("\t"); $xml->startDocument(); $xml->startElement('data'); $xml->startElement('config'); $xml->startElement('hex'); $xml->writeCData('0x' . $widget_profile['background_color']); $xml->endElement(); $xml->startElement('width'); $xml->writeCData($widget_profile['width']); $xml->endElement(); $xml->startElement('height'); $xml->writeCData($widget_profile['height']); $xml->endElement(); $xml->startElement('fullscreen'); $xml->writeCData('false'); $xml->endElement(); $xml->startElement('special'); $xml->writeCData('false'); $xml->endElement(); $xml->startElement('specialName'); $xml->writeCData('Tools & Offers'); $xml->endElement(); $xml->startElement('specialLink'); $xml->writeCData('http://bettycrocker.com'); $xml->endElement(); $xml->startElement('client'); $xml->writeCData($widget_profile['site_url']); $xml->endElement(); $xml->endElement(); if (count($widget_content) > 0) { foreach ($widget_content as $tab) { $xml->startElement('tab'); $xml->writeAttribute('id', $tab['tabname']); if (count($tab['video']) > 0) { foreach ($tab['video'] as $video) { $video_sql = "select VID, flvdoname, title from video where VID='" . $video . "'"; $video_result = $howdini->query($video_sql); if ($video_result->rowCount() > 0) { foreach ($video_result as $video_row) { $video_row['flvdoname'] = substr($video_row['flvdoname'], 35, -4); $xml->startElement('vid'); $xml->writeAttribute('flv', $video_row['flvdoname']); $xml->writeAttribute('thumb', 'http://www.howdini.com/thumb/' . $video_row['VID'] . '.jpg'); $xml->writeAttribute('title', $video_row['title']); $xml->endElement(); } } } } $xml->endElement(); } } $xml->endElement(); $xml->endDocument(); header('Content-Type: text/xml; charset=UTF-8'); echo $xml->flush(); Thanks in advance for any answers! EDIT: I have included the change and now Firebug sees the XML. Now it's just not seeing the swf file but I can see the swf file in other parts of the page.

Read the article

jqGrid - Problems opening in jquery tabs (on Firefox and Google Chrome)

- by Ben Hargreaves

I have developed a very simple MVC app to test out trirand's jqGrid for MVC. The app opens a jqgrid in a jquery tab group and everything is ok with IE. However when I use Firefox jqgrid only opens occasionaly in the first tab (but not under any other tab), and in Chrome my jqgrids dont appear to open under any tab of the group. I'm a bit of an MVC newbie (and have only been testing jqgrid out for a few days), but I know my users will want to use different browsers. Trirand have not come back with any answer so wondered if anyone else had had a similar issue. I have really just implemented jqgrid as per the controllers and model in the sample application on the Trirand site, and then combined it with a straightforward jquery tab group. My MVC Details Page is as follows; <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage<PRAMSAPP.Models.Family>" %> <%@ Import Namespace="Trirand.Web.Mvc" %> <%@ Import Namespace="PRAMSAPP.Controllers" %> <%@ Import Namespace="PRAMSAPP.Models" %> <asp:Content ID="Content1" ContentPlaceHolderID="TitleContent" runat="server"> Details </asp:Content> <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="/scripts/jquery-ui-1.7.2.custom.css" /> <script type="text/javascript" src="/scripts/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="/scripts/jquery-ui-1.7.2.custom.min.js"></script> <fieldset> <legend>Family</legend> <div class="display-field"><%= Html.Encode(Model.FamilyID) %></div> <div class="display-field"><%= Html.Encode(Model.FamilySurname) %></div> </fieldset> <div id="tabs"> <ul> <li> <%= Html.ActionLink("GridChildren", "GridDemo", new { controller = "Grid", id = Model.FamilyID })%> </li> <li> <%= Html.ActionLink("Children", "ShowFamiliesChildren", new { famid = Model.FamilyID, page = Page})%> </li> </ul> </div> <p> <%= Html.ActionLink("Edit", "Edit", new { id=Model.FamilyID }) %> | <%= Html.ActionLink("Back to List", "Index") %> </p> <script type="text/javascript"> $(function() { $('#tabs').tabs(); }); </script> </asp:Content> And My Controller page is as follows; <%@ Page Language="C#" Inherits="System.Web.Mvc.ViewPage<PRAMSAPP.Models.FamiliesChildrenJqGridModel>" %> <%@ Import Namespace="Trirand.Web.Mvc" %> <%@ Import Namespace="PRAMSAPP.Controllers" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head id="Head1" runat="server"> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" />  <link rel="stylesheet" type="text/css" media="screen" href="/Content/themes/redmond/jquery-ui-1.7.1.custom.css" />  <link rel="stylesheet" type="text/css" media="screen" href="/Content/themes/ui.jqgrid.css" />  <script type="text/javascript" src="/Scripts/jquery-1.3.2.min.js"></script>  <script type="text/javascript" src="/Scripts/grid.locale-en.js"></script> <script type="text/javascript" src="/Scripts/jqgrid/jquery.jqGrid.min.js"></script> </head> <body> <div> <%= Html.Trirand().JQGrid(Model.FamiliesChildrenGrid, "JQGrid1") %> </div> </body>

Read the article

Tools to Help Post Content On Your WordPress Blog

- by Matthew Guay

Now that you’ve got a nice blog, you want to do more with it and start posting content. Here we look at some tools that will allow you to post directly to your WordPress blog. Writing a new blog post is easy with WordPress as we saw in our previous post about Starting your own WordPress blog. The web editor gives you a lot of features and even lets you edit your post’s source code if you enjoy hacking HTML. There are other tools that will allow you to post content, here we look at how you can post with dedicated apps, browser plugins, and even by email. Windows Live Writer Windows Live Writer (part of the Windows Live Essentials Suite) is a great app for posting content to your blog. This free program for Microsoft lets you post content to a variety of blogging services, including Blogger, Typepad, LiveJournal, and of course WordPress. You can write blog posts directly from its Word-like editor, complete with pictures and advanced formatting. Even if you’re offline, you can still write posts and save them for when you’re online again. For more information about installing Live writer, check out our article on how to Install Windows Live Essentials In Windows 7. Once Live Writer is installed, open it to add your blog. If you already had Live Writer installed and configured for a blog, you can add your new blog, too. Just click your blog’s name in the top right corner, and select “Add blog account”. Select “Other blog service” to add your WordPress blog to Writer, and click Next. Enter your blog’s web address, and your username and password. Check Remember my password so you don’t have to enter it every time you write something. Writer will analyze your blog and setup your account. During the setup process it may ask to post a temporary post. This will let you preview blog posts using your blog’s real theme, which is helpful, so click Yes. Finally, add your Blog’s name, and click Finish. You can now use the rich editor to write and add content to a new blog post. Select the Preview tab to see how your post will look on your blog… Or, if you’re a HTML geek, select the Source tab to edit the code of your blog post. From the bottom of the window, you can choose categories, insert tags, and even schedule the post to publish on a different day. Live Writer is fully integrated with WordPress; you’re not missing anything by using the desktop editor. If you want to edit a post you’ve already published, click the Open button and select the post. You can chose and edit any post, including ones you published via the web interface or other editors. Add Multimedia Content to your Posts with Live Writer Back in the Edit tab, you can add pictures, videos and more from the sidebar. Select what you want to insert. Pictures If you insert a picture, you can add many nice borders and designs to it. Or, you can even add artistic effects from the Effects tab in the sidebar. Photo Gallery If you want to post several pictures, say some of your vacation shots, then inserting a picture gallery may be the best option. Select Insert Photo Gallery in the sidebar, and then choose the pictures you want in the gallery. Once the gallery is inserted, you can choose from several styles to showcase your pictures. When you post the blog, you will be asked to sign in with your Windows Live ID as the gallery pictures will be stored in the free Skydrive storage service. Your blog readers can see the preview of your pictures directly on your blog, and then can view each individual picture, download them, or see a slideshow online via the link. Video If you want to add a video to your blog post, select Video from the sidebar as above. You can select a video that’s already online, or you can choose a new video from file and upload it via YouTube directly from Windows Live Writer. Note that you will have to sign in with your YouTube account to upload videos to YouTube, so if you’re not logged in you’ll be prompted to do so when you click Insert. Geek Tip: If you ever want to copy your Live Writer settings to another computer, check out our article on how to Backup Your Windows Live Writer Settings. Microsoft Office Word Word 2007 and 2010 also let you post content directly to your blog. This is especially nice if you’ve already typed up a document and think it would be good on your Blog as well. Check out our in-depth tutorial on posting blog posts via Word 2007 using Word 2007 as a blogging tool. This works in Word 2010 too, except the Office Orb has been replaced by the new Backstage view. So, in Word 2010, to start a new blog post, click File \ New then select Blog post. Proceed as you would in Word 2007 to add your blog settings and post the content you want. Or, if you’ve already written a document and want to post it, select File \ Share (or Save and Send in the final version of Word 2010), and then click Publish as Blog Post. If you haven’t setup your blog account yet, set it up as shown in the Word 2007 article. Post Via Email Most of us use email daily, and already have our favorite email app or service. Whether on your desktop or mobile phone, it’s easy to create rich emails and add content. WordPress lets you generate a unique email address that you can use to easily post content and email to your blog. Just compose your email with the subject as the title of your post, and send it to this unique address. Your new post will be up in minutes. To active this feature, click the My Account button in the top menu bar in your WordPress.com account, and select My Blogs. Click the Enable button under Post by Email beside your blog’s name. Now you’ll have a private email you can use to post to your blog. Anything you send to this email will be posted as a new post. If you think your email may be compromised, click Regenerate to get a new publishing email address. Any email program or webapp now is a blog post editor. Feel free to use rich formatting or insert pictures; it all comes through great. This is also a great way to post to your blog from your mobile device. Whether you’re using webmail or a dedicated email client on your phone, you can now blog from anywhere. Mobile Applications WordPress also offer dedicated applications for blogging directly from your mobile device. You can write new posts, edit existing ones, and manage comments all from your Smartphone. Currently they offer apps for iPhone, Android, and Blackberry. Check them out at the link below. Conclusion Whether you want to write from your browser or email a post to your blog, WordPress is flexible enough to work right along with your preferences. However you post, you can be sure that it will look professional and be easily accessible with your WordPress blog. Download Windows Live Writer Download WordPress apps for your mobile device Similar Articles Productive Geek Tips Quick Tip: Set a Future Date for a Post in WordPressAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogFuture Date a Post in Windows Live WriterHow To Start Your Own Professional Blog with WordPressUsing Word 2007 as a Blogging Tool TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

Read the article

Monitor your Hard Drive’s Health with Acronis Drive Monitor

- by Matthew Guay

Are you worried that your computer’s hard drive could die without any warning? Here’s how you can keep tabs on it and get the first warning signs of potential problems before you actually lose your critical data. Hard drive failures are one of the most common ways people lose important data from their computers. As more of our memories and important documents are stored digitally, a hard drive failure can mean the loss of years of work. Acronis Drive Monitor helps you avert these disasters by warning you at the first signs your hard drive may be having trouble. It monitors many indicators, including heat, read/write errors, total lifespan, and more. It then notifies you via a taskbar popup or email that problems have been detected. This early warning lets you know ahead of time that you may need to purchase a new hard drive and migrate your data before it’s too late. Getting Started Head over to the Acronis site to download Drive Monitor (link below). You’ll need to enter your name and email, and then you can download this free tool. Also, note that the download page may ask if you want to include a trial of their for-pay backup program. If you wish to simply install the Drive Monitor utility, click Continue without adding. Run the installer when the download is finished. Follow the prompts and install as normal. Once it’s installed, you can quickly get an overview of your hard drives’ health. Note that it shows 3 categories: Disk problems, Acronis backup, and Critical Events. On our computer, we had Seagate DiskWizard, an image backup utility based on Acronis Backup, installed, and Acronis detected it. Drive Monitor stays running in your tray even when the application window is closed. It will keep monitoring your hard drives, and will alert you if there’s a problem. Find Detailed Information About Your Hard Drives Acronis’ simple interface lets you quickly see an overview of how the drives on your computer are performing. If you’d like more information, click the link under the description. Here we see that one of our drives have overheated, so click Show disks to get more information. Now you can select each of your drives and see more information about them. From the Disk overview tab that opens by default, we see that our drive is being monitored, has been running for a total of 368 days, and that it’s health is good. However, it is running at 113F, which is over the recommended max of 107F. The S.M.A.R.T. parameters tab gives us more detailed information about our drive. Most users wouldn’t know what an accepted value would be, so it also shows the status. If the value is within the accepted parameters, it will report OK; otherwise, it will show that has a problem in this area. One very interesting piece of information we can see is the total number of Power-On Hours, Start/Stop Count, and Power Cycle Count. These could be useful indicators to check if you’re considering purchasing a second hand computer. Simply load this program, and you’ll get a better view of how long it’s been in use. Finally, the Events tab shows each time the program gave a warning. We can see that our drive, which had been acting flaky already, is routinely overheating even when our other hard drive was running in normal temperature ranges. Monitor Acronis Backups And Critical Errors In addition to monitoring critical stats of your hard drives, Acronis Drive Monitor also keeps up with the status of your backup software and critical events reported by Windows. You can access these from the front page, or via the links on the left hand sidebar. If you have any edition of any Acronis Backup product installed, it will show that it was detected. Note that it can only monitor the backup status of the newest versions of Acronis Backup and True Image. If no Acronis backup software was installed, it will show a warning that the drive may be unprotected and will give you a link to download Acronis backup software. If you have another backup utility installed that you wish to monitor yourself, click Configure backup monitoring, and then disable monitoring on the drives you’re monitoring yourself. Finally, you can view any detected Critical events from the Critical events tab on the left. Get Emailed When There’s a Problem One of Drive Monitor’s best features is the ability to send you an email whenever there’s a problem. Since this program can run on any version of Windows, including the Server and Home Server editions, you can use this feature to stay on top of your hard drives’ health even when you’re not nearby. To set this up, click Options in the top left corner. Select Alerts on the left, and then click the Change settings link to setup your email account. Enter the email address which you wish to receive alerts, and a name for the program. Then, enter the outgoing mail server settings for your email. If you have a Gmail account, enter the following information: Outgoing mail server (SMTP): smtp.gmail.com Port: 587 Username and Password: Your gmail address and password Check the Use encryption box, and then select TLS from the encryption options. It will now send a test message to your email account, so check and make sure it sent ok. Now you can choose to have the program automatically email you when warnings and critical alerts appear, and also to have it send regular disk status reports. Conclusion Whether you’ve got a brand new hard drive or one that’s seen better days, knowing the real health of your it is one of the best ways to be prepared before disaster strikes. It’s no substitute for regular backups, but can help you avert problems. Acronis Drive Monitor is a nice tool for this, and although we wish it wasn’t so centered around their backup offerings, we still found it a nice tool. Link Download Acronis Drive Monitor (registration required) Similar Articles Productive Geek Tips Quick Tip: Change Monitor Timeout From Command LineAnalyze and Manage Hard Drive Space with WinDirStatMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersDefrag Multiple Hard Drives At Once In WindowsFind Your Missing USB Drive on Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Windows 7’s WordPad is Actually Good Greate Image Viewing and Management with Zoner Photo Studio Free Windows Media Player Plus! – Cool WMP Enhancer Get Your Team’s World Cup Schedule In Google Calendar Backup Drivers With Driver Magician TubeSort: YouTube Playlist Organizer

Read the article

Convert DVD to MP4 / H.264 with HD Decrypter and Handbrake

- by DigitalGeekery

Are you looking for a way to convert your DVD collection to high quality MP4 files? Today we are going to take a look at using DVDFab HD Decrypter along with Handbrake to convert DVDs to MP4 using the H.264 codec. Process Overview Handbrake is a great file conversion application, but it unfortunately can’t handle DVD copy protection. For that we will use DVDFab’s HD Decrypter. HD Decrypter is the always free portion of the DVDFab application. What HD Decrypter will do, is remove the copy protection from your DVD, and copy the Video-TS and Audio-TS folders to your hard drive. Once the copy protection is gone, we will use Handbrake to convert the files to MP4 format with H.264 compression. Note: You’ll get full access to all the options in DVDFab during the 30 trial period. However, the HD Decrypter is free and will continue to work. Ripping the DVD Install both Handbrake and DVDFab HD Decrypter. (Download links below) Once the applications are installed, place your DVD into your DVD drive and open DVDFab. On the welcome screen, click “Start DVDFab.” You’ll be prompted to choose your region. Click “OK.” The disc is analyzed and opened… You’ll be brought to the main interface. Make sure you have the Full Disc option selected at the left panel and “Copy DVD-Video (VIDEO_TS folder) is selected. Click “Start.” Don’t be confused by the “DVD to DVD” option pop up. We won’t actually be burning to DVD. The HD Decrypter portion of the DVDFab suite is part of the DVD to DVD option. Click “OK.” The DVD will be ripped to your hard drive. When the copy process is complete, you’ll be prompted to insert media to start the write process. We aren’t going to be burning to disc, so just click Cancel then close out of DVDFab. Converting to MP4 Now we are ready to convert Open Handbrake and click on the “Source” button at the top left. Select DVD / VIDEO_TS folder from the drop down list. Now we need to browse for the location where DVDFab HD Decrypter copied your movie. By default, that location will be the \DVDFab\Temp\FullDisc directory in your Documents folder. For example, in Windows 7, it would be: C:\Users\%username%\Documents\DVDFab\Temp\FullDisc\[Name of Your DVD] Select the folder, and click “OK.” You may be prompted to set a default path in Handbrake. This is an optional step. Click “OK.” If you’d like to set a default destination folder, Go to Tools on the top menu, select Options. On the General tab, click “Browse” to select a destination output folder. Click “Close” when Finished. Next, click the dropdown list next to “Title.” Select the title that matches the length of the movie. It’s possible you may have see more than one title with a similar length. If so, consult the DVD information, or a site like IMDB.com, to find the proper movie title length. Select your container under Output Settings. This will be your final output file extension. We will be using MP4 for this example. You also have the option of MKV. If you didn’t set up a default destination folder, you’ll need to select one by clicking the “Browse” button. You can manually customize the output file name and change the output file extension to .mp4 (Unless you prefer the iPod friendly .m4v extension). Settings There are a variety of custom settings that can be changed either through the tabs listed under Output Settings, or by selecting one of the Presets to the right. If converting exclusively for any of the devices listed in the preset list, simply click on that device and the settings will be automatically applied in the Output Settings tabs. For more Universal (non-Apple) devices or output, select the Normal profile. For the most part, the presets will suit quite nicely. However, you can further customize settings if you’d like. The Picture tab allows you to tweak the size or cropping region. You must change Anamorphic to Loose or Custom to change the size. The Video tab allows you to choose your codec. H.264 is the default. You also have the option to choose a target (output) size. The Constant Quality is recommended to be set between 59% – 63%. Anything over 70% will likely result in an output file larger than the input without any improved quality. On the Subtitles tab, you can select an available subtitle from the dropdown list and click “Add” to add it to the output file. When you’ve finished any customizations you are ready to begin the conversion process. Click “Start.” A Command window will open and you can follow the process. You’ll probably want to find something to do in the meantime as the process could take a couple of hours. When the process completes, you’re ready to watch your video. Although it’s a time consuming process that involves a couple steps, this method will give you high quality H.264 video files. If you want to rip and burn your DVD’s to ISO check out our article on how to rip and convert DVD’s to an ISO image. Links Download DVDFab HD Decrypter (Part of the DVDFab suite) Download Handbrake Similar Articles Productive Geek Tips Enjoy Quick & Easy Unit Conversion with Convert for WindowsConvert Older Excel Documents to Excel 2007 FormatCalculate with Qalculate on LinuxHow To Convert Video Files to MP3 with VLCConvert a Row to a Column in Excel the Easy Way TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Use Quick Translator to Translate Text in 50 Languages (Firefox) Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone

Read the article

Improving the Industry’s Best Cloud Project Portfolio Management (PPM) Solution – New Release of Instantis EnterpriseTrack

- by Melissa Centurio Lopes

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} By Yasser Mahmud, Vice President of Product Strategy & Industry Marketing, Oracle Primavera We know that in today’s rapidly changing world, organizations and leaders must adapt to fierce competition, business climate change and customers consistently demanding more for less. And project portfolio management (PPM) initiatives are a key component to help organizations thrive and stand out among competitors. That’s why I’m excited to announce Instantis EnterpriseTrack 8.5. Since Oracle’s acquisition of Instantis late last year, we’ve been busy working to enhance the leading cloud PPM solution. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Here’s what’s new: Perform more precise resource planning and management Gain more precise capacity visibility for resource planning and project execution with resource calendars that capture vacation, LOA and part-time resource availability Ensure compliance and governance processes with activity labor cost capitalization Improve project labor cost estimation, tracking and administration with variable resource rates Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Optimize Project Demand Management And Execution Enhance productivity and analysis with project request flexible staffing plan and simplified finance estimation Improve project status communication and execution with estimated time to complete (ETC) in timesheets and projects Achieve audit compliance and governance with field change history for key project and project request fields Enforce proper financial accounting processes with the new strict finance lock/close period option Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Improve Reporting and the User Experience Enhance user productivity and analysis with improved listing pages Improve program reporting with new program filters in listing pages and reports Run large data volume user defined Excel reports with MS Excel 2010 support Accelerate user productivity and satisfaction with an improved user interface for project issues, risks, and scope changes Enjoy faster system response and improved user experience with optimized listing pages, resource planning, and application cache Deliver user self-service training on demand with UPK support And if that wasn’t enough, we’ve also made additional improvements to timesheets, field change history and finance lock/close period. Learn more about Instantis EnterpriseTrack 8.5.

Read the article

UPK Pre-Built Content Update

- by Karen Rihs

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} UPK pre-built content development efforts are always underway and growing. Over the last few months, the following new, upgraded, and revised modules became available: NEW CONTENT RELEASES E-Business Suite 12.1 Install Base Process Manufacturing, Process Quality Fundamentals for EBS Fusion 11g Release 1 Receivables Assets Purchasing Distributed Order Orchestration Payables Functional Setup Manager Project Portfolio Management Self Service Procurement JDE E1 9.0 Accounts Payable 9.0 with 9.1 Tools Fundamentals 9.0 with 9.1 Tools General Ledger 9.0 with 9.1 Tools Accounts Receivable 9.0 with 9.1 Tools Procurement and Subcontract Management 9.0 with 9.1 Tools Oracle Utilities Customer Care and Billing 2.3.1 Administrative Setup User Tasks Primavera Primavera Contract Management 14 Primavera P6 Enterprise Project Portfolio Management 8.2 UPK CONTENT UPGRADES Agile CNM 1.2 Customer Needs Management E-Business Suite 12.1 Project Foundation JDE E1 9.1 Fixed Assets Accounting General Ledger Fundamentals Inventory Management Sales Order Management PeopleSoft 9.1 Reporting Tools for PeopleTools 8.5.2 UPK CONTENT REVISIONS Oracle Utilities for Meter Data Management 2.0.1 Administrative Setup User Tasks VEE and Usage Rules Working with Measurement Data PeopleSoft 9.0 and 9.1 Enterprise Learning Management Reporting Tools for HCM (previously Reporting Tools for HRMS) PeopleSoft 9.1 Expenses General Ledger Inventory Contracts Grants Strategic Sourcing For a list of modules currently available for each product line, visit the UPK Resource Library on Oracle.com. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} For more information on how your organization can take advantage of UPK pre-built content, see our previous blog, Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The Value of UPK Pre-Built Content. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} - Karen Rihs, UPK Outbound Product Management

Read the article

Coming to OpenWorld? A must attend session…

- by Ruma Sanyal

Normal 0 false false false EN-US X-NONE X-NONE NTT Docomo, Inc. is the predominant mobile phone operator in Japan. The name is officially an abbreviation of the phrase, "do communications over the mobile network", and is also from a compound word dokomo, meaning "everywhere" in Japanese. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} One of the most important of NTT Docomo’s systems is ALADIN, which is a nationwide operating system shared with its eight regional subsidiaries. ALADIN has five primary functions: customer management, phone number management, information processing and storage, sales information management, and credit investigation. To enhance cost efficiency and help ensure stable operation of ALADIN, NTT Docomo has employed Oracle WebLogic Server as a new application platform. Further information on this can be found here. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Last year at OpenWorld, NTT Docomo was honored as an Innovation Award Winner for: · Implementing real time sales and contract management system enabling all services requested by customers for immediate activations before customer leaves the Docomo store · A robust disaster recovery strategy, room to grow the business, and ability to move custom Java development to a platform with built in standards - WebLogic · Better performance, better reliability, better stability, and smooth migration v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Meet This Year's Most Impressive Innovators! This year we continue to honor customers for their most innovative and cutting-edge solutions using Oracle Fusion Middleware. Join us in celebrating award recipients’ great achievements and commitment to innovation. Oracle Fusion Middleware: Meet This Year's Most Impressive Innovators Session ID: CON7029 Tuesday September 30, 2014 @ 5-5:45 pm (PST) Yerba Buena Center for the Arts YBCA Theater (next to Moscone North) 700 Howard St., San Francisco, CA, 94103 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

New Feature in ODI 11.1.1.6: ODI for Big Data

- by Julien Testut

Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} By Ananth Tirupattur Starting with Oracle Data Integrator 11.1.1.6.0, ODI is offering a solution to process Big Data. This post provides an overview of this feature. With all the buzz around Big Data and before getting into the details of ODI for Big Data, I will provide a brief introduction to Big Data and Oracle Solution for Big Data. So, what is Big Data? Big data includes: structured data (this includes data from relation data stores, xml data stores), semi-structured data (this includes data from weblogs) unstructured data (this includes data from text blob, images) Traditionally, business decisions are based on the information gathered from transactional data. For example, transactional Data from CRM applications is fed to a decision system for analysis and decision making. Products such as ODI play a key role in enabling decision systems. However, with the emergence of massive amounts of semi-structured and unstructured data it is important for decision system to include them in the analysis to achieve better decision making capability. While there is an abundance of opportunities for business for gaining competitive advantages, process of Big Data has challenges. The challenges of processing Big Data include: Volume of data Velocity of data - The high Rate at which data is generated Variety of data In order to address these challenges and convert them into opportunities, we would need an appropriate framework, platform and the right set of tools. Hadoop is an open source framework which is highly scalable, fault tolerant system, for storage and processing large amounts of data. Hadoop provides 2 key services, distributed and reliable storage called Hadoop Distributed File System or HDFS and a framework for parallel data processing called Map-Reduce. Innovations in Hadoop and its related technology continue to rapidly evolve, hence therefore, it is highly recommended to follow information on the web to keep up with latest information. Oracle's vision is to provide a comprehensive solution to address the challenges faced by Big Data. Oracle is providing the necessary Hardware, software and tools for processing Big Data Oracle solution includes: Big Data Appliance Oracle NoSQL Database Cloudera distribution for Hadoop Oracle R Enterprise- R is a statistical package which is very popular among data scientists. ODI solution for Big Data Oracle Loader for Hadoop for loading data from Hadoop to Oracle. Further details can be found here: http://www.oracle.com/us/products/database/big-data-appliance/overview/index.html ODI Solution for Big Data: ODI’s goal is to minimize the need to understand the complexity of Hadoop framework and simplify the adoption of processing Big Data seamlessly in an enterprise. ODI is providing the capabilities for an integrated architecture for processing Big Data. This includes capability to load data in to Hadoop, process data in Hadoop and load data from Hadoop into Oracle. ODI is expanding its support for Big Data by providing the following out of the box Knowledge Modules (KMs). IKM File to Hive (LOAD DATA).Load unstructured data from File (Local file system or HDFS ) into Hive IKM Hive Control AppendTransform and validate structured data on Hive IKM Hive TransformTransform unstructured data on Hive IKM File/Hive to Oracle (OLH)Load processed data in Hive to Oracle RKM HiveReverse engineer Hive tables to generate models Using the Loading KM you can map files (local and HDFS files) to the corresponding Hive tables. For example, you can map weblog files categorized by date into a corresponding partitioned Hive table schema. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Using the Hive control Append KM you can validate and transform data in Hive. In the below example, two source Hive tables are joined and mapped to a target Hive table. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} The Hive Transform KM facilitates processing of semi-structured data in Hive. In the below example, the data from weblog is processed using a Perl script and mapped to target Hive table. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Using the Oracle Loader for Hadoop (OLH) KM you can load data from Hive table or HDFS to a corresponding table in Oracle. OLH is available as a standalone product. ODI greatly enhances OLH capability by generating the configuration and mapping files for OLH based on the configuration provided in the interface and KM options. ODI seamlessly invokes OLH when executing the scenario. In the below example, a HDFS file is mapped to a table in Oracle. Development and Deployment:The following diagram illustrates the development and deployment of ODI solution for Big Data. Using the ODI Studio on your development machine create and develop ODI solution for processing Big Data by connecting to a MySQL DB or Oracle database on a BDA machine or Hadoop cluster. Schedule the ODI scenarios to be executed on the ODI agent deployed on the BDA machine or Hadoop cluster. ODI Solution for Big Data provides several exciting new capabilities to facilitate the adoption of Big Data in an enterprise. You can find more information about the Oracle Big Data connectors on OTN. You can find an overview of all the new features introduced in ODI 11.1.1.6 in the following document: ODI 11.1.1.6 New Features Overview

Read the article

Oracle @ E20 Conference Boston - Building Social Business

- by Michael Snow

12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle WebCenter is The Engagement Platform Powering Exceptional Experiences for Employees, Partners and Customers &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt;lt;p&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/p&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;gt; The way we work is changing rapidly, offering an enormous competitive advantage to those who embrace the new tools that enable contextual, agile and simplified information exchange and collaboration to distributed workforces and networks of partners and customers. As many of you are aware, Enterprise 2.0 is the term for the technologies and business practices that liberate the workforce from the constraints of legacy communication and productivity tools like email. It provides business managers with access to the right information at the right time through a web of inter-connected applications, services and devices. Enterprise 2.0 makes accessible the collective intelligence of many, translating to a huge competitive advantage in the form of increased innovation, productivity and agility.The Enterprise 2.0 Conference takes a strategic perspective, emphasizing the bigger picture implications of the technology and the exploration of what is at stake for organizations trying to change not only tools, but also culture and process. Beyond discussion of the "why", there will also be in-depth opportunities for learning the "how" that will help you bring Enterprise 2.0 to your business. You won't want to miss this opportunity to learn and hear from leading experts in the fields of technology for business, collaboration, culture change and collective intelligence.Oracle was a proud Gold sponsor of the Enterprise 2.0 Conference, taking place this past week in Boston. For those of you that weren't able to make it - we've made the Oracle Social Network Presentation session available here and have posted the slides below. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following is intended to outline our general product direction. It is intended for information purposes only, and may not be incorporated into any contract. It is not a commitment to deliver any material, code, or functionality, and should not be relied upon in making purchasing decisions. The development, release, and timing of any features or functionality described for Oracle’s products remains at the sole discretion of Oracle. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

How to Export Multiple Contacts in Outlook 2013 to Multiple vCards or a Single vCard

- by Lori Kaufman

We’ve shown you how to export a contact to and import a contact from a vCard (.vcf) file. However, what if you want to export multiple contacts at the same time to multiple vCard files or even a single vCard file? Outlook doesn’t allow you to directly export all your contacts as vCard files or as a single vCard file, but there is a way to accomplish both tasks. Export Multiple Contacts to Multiple vCard Files Outlook allows you to forward contact information as a vCard. You can also select multiple contacts and forward them all at once. This feature allows you to indirectly export multiple contacts at once to multiple vCard files. Click the People tab to access your contacts. Select all the contacts you want to export using the Shift and Ctrl keys as needed. Select Contacts the same way you would select files in Windows Explorer. Click Forward Contact in the Share section on the Home tab and select As a Business Card from the drop-down menu. The selected contacts attached to a new email message as .vcf files. To select all the attached .vcf files, right-click in the Attached box and select Select All from the popup menu. Make sure the folder to which you want to export the contacts is open in Windows Explorer. Drag the selected attached .vcf files from the new email message to the open folder in Windows Explorer. A .vcf file is created for each contact you selected and dragged to the folder. You can close the Message window by clicking on the X in the upper, right corner of the window. NOTE: You can also close the Message window by clicking the File tab. Then, click the Close option on the left. Because you already have your .vcf files, you don’t need to save or send the message, so click No when asked if you want to save your changes. If it turns out that a draft of your message was saved, the following message displays. Click No to delete the draft. Export Multiple Contacts to a Single vCard (.vcf) File If you would rather export your contacts to a single vCard (.vcf) File, there is a way to do this using Gmail. We’ll export the contacts from Outlook as a .csv file and then use Gmail to convert the .csv file to a .vcf file. Select the contacts you want to export on the People page and click the File tab. On the Account Information screen, click Open & Export in the list on the left. On the Open screen, click Import/Export. The Import and Export Wizard displays. Select Export to a file from the Choose an action to perform list and click Next. In the Create a file of type box, select Comma Separated Values. Click Next. Contacts should be already selected in the Select folder to export from box. If not, select it. Click Next. Click Browse to the right of the Save exported file as box. Navigate to the folder to which you want to export the .csv file. Enter a name for the file in the File name edit box, keeping the .csv extension. The path you selected is entered into the Save exported file as edit box. Click Next. The final screen of the Export to a File dialog box displays listing the action to be performed. Click Finish to begin the export process. Once the export process is finished, you will see the .csv file in the folder in Windows Explorer. Now, we will import the .csv file into Gmail. Go to Gmail and sign in to your account. Click Gmal in the upper, left corner of the main page and select Contacts from the drop-down menu. On the Contacts page, click More above your list of contacts and select Import from the drop-down menu. Click Browse on the Import contacts dialog box that displays. Navigate to the folder in which you saved the .csv file and select the file. Click Open. Click Import on the Import contacts dialog box. A screen displays listing the contacts you imported, but not yet merged into your main Gmail contacts list. Select the contacts you imported. NOTE: The contacts you imported may be the only contacts in this list. If that’s the case, they all should be automatically selected. Click More and select Export from the drop-down menu. On the Export contacts dialog box, select Selected contacts to indicate which contacts you want to export. NOTE: We could have selected The group Imported 10/10/13 because that contains the same two contacts as the Selected contacts. Select vCard format for the export format. Click Export. Gmail creates a contacts.vcf file containing the selected contacts and asks you whether you want to open the file with Outlook or save the file. To save the file, select the Save File option and click OK. Navigate to the folder in which you want to save the contacts.vcf file, change the name of the file in the File name edit box, if desired, and click Save. The .vcf file is saved to the selected directory and contains all the contacts you exported from Outlook. This could be used as a way to backup your contacts in one file. You could also backup the .csv file. However, if you have a lot of contacts you will probably find that the .vcf file is smaller. We only exported two contacts, and our .csv file was 2 KB, while the .vcf file was 1 KB. We will be showing you how to import multiple contacts from a single .vcf file into Outlook soon.

Search Results

Search found 9364 results on 375 pages for 'alt tab'.

Page 96/375 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103 | Next Page >

- by user191622

- by TheLearner

- by Richard

- by user1471995

- by Linux Intel

- by skjagini

- by Simon Thorpe

- by srkirkland

- by srkirkland

- by Sammy

- by Stephen.Walther

- by Matthew Guay

- by shiju

- by Richard Lefebvre

- by AdonisSMU

- by Ben Hargreaves

- by Matthew Guay

- by Matthew Guay

- by DigitalGeekery

- by Melissa Centurio Lopes

- by Karen Rihs

- by Ruma Sanyal

- by Julien Testut

- by Michael Snow

- by Lori Kaufman

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103 | Next Page >