Search Results

Search found 7007 results on 281 pages for 'outlook 2003'.

Page 96/281 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

  • Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

    - by cwd
    I have Google Apps installed and I have tried to set up Outlook 2007 to send messages via SMTP. I followed the guide, selecting what I believe are all the correct settings. Yes, I am using POP for incoming, that is intentional but I don't believe it should affect outgoing messages. When I log into gmail (google apps) for my company, I can send a message that has an 8MB attachment (pdf file, not zipped or anything) and it sends fine. However, when I send the same message in Outlook with that same 8mb attachment it fails. Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps? The message headers are (some info omitted for privacy): Technical details of permanent failure: Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 552 552 #5.3.4 message size exceeds limit (state 17). ----- Original message ----- DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=company.com; s=google; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=IJwwxuIEdg1E4zXuGjeDod+1w3RYBBCNzSsqpuX77ih36HSiq++s3ZCQXPeU9CIZVg K8JPJQu9xjivYYjrRaYwyeowLIu0GIdR2h4kKEkFM/GNC2RFF3VwVgj+gvi5eqVZIuWn osT5/VEm10IED6B54NPOtGMgFTci6a57zzVKE= X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=20120113; h=from:to:cc:references:in-reply-to:subject:date:message-id :mime-version:content-type:x-mailer:thread-index:content-language :x-gm-message-state; bh=7d4i/Cbt0v0sY3zt5lN6y5CdvxjbRmTBG4AuBuMxtF4=; b=LjTecjok5K71Bymp6tZqAL2XCz03hWROV1mTK8Vf2AeEJwtel9ACu9kE5jW5iJqckb upYKPzoqYLBwAPOzMb9asWoTAZPzC7LMG65eDUc2/ZEvGqXrZs3ziUxwhF4t169yRVuy /6nm/aAt5uPMLPdobxGTJ8ahOIku1Z3gW+OcvZ6ERk1Av/bvuln09vcnyJIrHGh7eK8n cbGVxmK0aecgSPgIj2NALbHkyuxwj+LEBRV6uiz3THDjxAiNfsO5UFjV59sD+lVSBT3z ThOGE8WEXRnKHuP3FuKXyeUxKBZ2CxpWJpvDuS9EsFkln7zkISYEsRA0nUA6GSGi2Z/n 8YUg== Received: by 10.60.169.197 with SMTP id ag5mr12254920oec.137.1351036287413; Tue, 23 Oct 2012 16:51:27 -0700 (PDT) References: Date: Tue, 23 Oct 2012 19:51:16 -0400 Message-ID: <003a01cdb179$4bb2ca60$e3185f20$@com> MIME-Version: 1.0 Content-Type: multipart/related; boundary="----=_NextPart_000_003B_01CDB157.C4A12A60" X-Mailer: Microsoft Office Outlook 12.0 Thread-Index: Ac2xVCHGxoC7DDOkQBK3JSXowHb0EQAEB7agAAA/YKAAAIGcQAAAngfQAABAAPAAAFe7gAAAadvw AALgvLA= Content-Language: en-us X-Gm-Message-State: ALoCoQniMq7Fnh+NlfoWjTJPvKWbkhEaftSaFo9ZVvtRpWufTmhlRDx1a9Jf+wmYcbRh896gygNr The company I am sending email to is a company that uses Google Apps for Teams. This is their apps admin login. Should I be worried about that message? My Settings On the Google apps side I have set my SPF record and set / verified my DKIM key. Here are my outlook settings: Why am I unable to send an attachment with Outlook via SMTP that I am able to send via Gmail / Google Apps?

    Read the article

  • What are possible reasons why a calendar entry in OWA is at a different time than in Outlook?

    - by Ken Pespisa
    We have two Exchange 2003 servers, our primary server and a front-end server that hosts Outlook Web Access (OWA). When I open my boss' calendar via Outlook 2007 (from my Outlook client as well as hers) I see the event scheduled for 10:30 am. When I open her calendar via Outlook Web Access, the same event is scheduled for 4:30 am. I don't understand Exchange well-enough to imagine how this is possible. If you have any ideas why this could be happening, I greatly appreciate it. I'd also very much appreciate any insight you have to how this could be possible. There must be some cached data on the front-end server that causes the calendar entry to appear at a different time, I suppose. Any insight into how Exchange manages that cache and where I could look for an issue would be very helpful. Thank you!

    Read the article

  • How can I synchronise my Outlook Calendar with Google Calendar (preferably using a free/open source tool)?

    - by Kuf
    How can I synchronise my desktop Outlook calendar with my Google Calendar (Outlook - Google)? I saw the question Free tool for Synchronizing Google Contacts and Calendar with Outlook, but the solution that was suggested there is no longer available - Google Sync End of Life. There are tools that required a payment, like SyncMyCal, gSyncit and OggSync, but I am looking for a free / open source solution. One can download Google sync, but when trying to use it there's an error: For now, I use OggSync to synchronise, but as a freeware it allows to synchronise manually only, not automatically, so I have to remember to synchronise after every change. I checked Mozilla Sunbird, but I couldn't find any relative posts on how to synchronise Outlook - Google using it. Just to be clear: I'm not looking for software; I am looking for a solution. What can I do if sometimes software is a solution?

    Read the article

  • Outlook 2010: Can I search Only My: Inbox, All Inbox Subfolders, and Specified Archive File Folders all at once

    - by JLH
    The setup is a user that has a laptop with Outlook 2010. We have Outlook hosted by Sherweb. The user that has a large number of emails (40,000) in a single Inbox subfolder. (I believe) Having such a large number of emails in an inox is slowing the users laptop down and I want to start moving old emails to a seperate pst file on a machine on our network. The problem I have is the user needs to be able to search all 40,000 emails. Right now he can can search do a search on the single subfolder. I would like to be able to move some of the emails to a seperate pst so I can compact the Inbox and still give them a 'one-click' search function that is still fairly quick. I don't think the 'Search All Outlook Items' is the soltuion because this will search all outlook folders -- sent items, other public folders. P.S. I'm not a expericenced outlook administrator, so there may be some assumptions in my questions that are wrong. I have no problem with somebody showing the error of my ways.

    Read the article

  • What's a good way to do testing a plug-in on multiple Windows and Outlook versions?

    - by Andrei
    Hello, We're building a plug-in for Outlook that should work on multiple Windows versions (XP, Vista, 7) and also with different Outlook versions (2003, 2007, 2010). The testing problem I am facing right now, is that I can't figure out a good/convenient/thorough way to test the application on multiple Windows and Outlook versions. At the moment, I have a VirtualBox which runs many virtual machines, with different Windows versions and Outlook versions. So I would have a virtual machine with Windows 7 testing Outlook 2010, and another one with Windows 7 testing Outlook 2007, Windows Vista with Outlook 2010 and so on, going through some of the possible combinations. It kind of gets the job done, although it is cumbersome and takes a long time to test. Some of the testing included in the application is unit testing, but this is also rather tied in with the machine I test it on (windows 7 with outlook 2010). For example, I was using ManagementObject recently, which worked fine on my system (and thus passed the unit test for that method), however, using that object threw an exception in another person's system, which crashed the application. I work on Visual Studio 2010 Ultimate. The questions: Is there a more elegant way to make the testing process more streamline and more efficient? Any other testing methods you recommend? How would you deal with this problem? Thanks! Looking forward to your replies.

    Read the article

  • Excel Macro Runtime error 428 in Excel 2003

    - by Adam
    Hi I have created a xlt excel template which works fine in Excel 2007 under compatibility mode and shows no errors on compatibility check. The template runs a number of Macros which creates pivot tables and charts. When a colleague tries to run the same xlt on excel 2003 they get a Runtime error 428 (Object does not support this property or method). The runtime error fails at this point; ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Any help would be appreciated. This is the full Macro; Sub Auto_Open() ' ' ImportData Macro ' Macro to import data, Data must be in your local D: Drive and named raw.csv ' ' Sheets("raw").Select With ActiveSheet.QueryTables.Add(Connection:= _ "TEXT;d:\raw.csv", Destination:=Range _ ("$A$1")) .Name = "raw_1" .FieldNames = True .RowNumbers = False .FillAdjacentFormulas = False .PreserveFormatting = True .RefreshOnFileOpen = False .RefreshStyle = xlInsertDeleteCells .SavePassword = False .SaveData = True .AdjustColumnWidth = True .RefreshPeriod = 0 .TextFilePromptOnRefresh = False .TextFilePlatform = 850 .TextFileStartRow = 1 .TextFileParseType = xlDelimited .TextFileTextQualifier = xlTextQualifierDoubleQuote .TextFileConsecutiveDelimiter = False .TextFileTabDelimiter = False .TextFileSemicolonDelimiter = False .TextFileCommaDelimiter = True .TextFileSpaceDelimiter = False .TextFileColumnDataTypes = Array(1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, _ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1) .TextFileTrailingMinusNumbers = True .Refresh BackgroundQuery:=False End With ' ' AddMonthColumn Macro ' ' Sheets("raw").Select Range("AK1").Select ActiveCell.FormulaR1C1 = "Month" Range("AK2").FormulaR1C1 = "=DATE(YEAR(RC[-36]),MONTH(RC[-36]),1)" LastRow = ActiveSheet.UsedRange.Rows.Count Range("AK2").AutoFill Destination:=Range("AK2:AK" & LastRow) Columns("AK:AK").EntireColumn.AutoFit Columns("AK:AK").Select Selection.NumberFormat = "mmmm" With Selection .HorizontalAlignment = xlCenter End With Columns("AK:AK").EntireColumn.AutoFit Selection.Copy Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False ' ' Add Report Information [Text] ' Sheets("Frontpage").Select Range("A2:N2").Select Selection.Merge ActiveCell.FormulaR1C1 = "Service Activity Report" With Selection.Font .Size = 20 End With Range("A3:N3").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Customer Name") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With Range("A4:N4").Select Selection.Merge ActiveCell.FormulaR1C1 = InputBox("Date Range dd/mm/yyyy - dd/mm/yyyy") With Selection .HorizontalAlignment = xlCenter .VerticalAlignment = xlCenter End With ' ' IncidentsbyPriority Macro ' ' Sheets("Frontpage").Select Range("A7").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R7C1", TableName:="PivotTable2", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(7, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$7:$H$22") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable2").PivotFields("Priority") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable2").AddDataField ActiveSheet.PivotTables( _ "PivotTable2").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentsbyPriority" ActiveChart.ChartTitle.Text = "Incidents by Priority" Dim RngToCover As Range Dim ChtOb As ChartObject Set RngToCover = ActiveSheet.Range("D7:L16") Set ChtOb = ActiveSheet.ChartObjects("IncidentsbyPriority") ChtOb.Height = RngToCover.Height ' resize ChtOb.Width = RngToCover.Width ' resize ChtOb.Top = RngToCover.Top ' reposition ChtOb.Left = RngToCover.Left ' reposition ' ' IncidentbyMonth Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R18C1", TableName:="PivotTable4", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(18, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$18:$H$38") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable4").PivotFields("Month") .Orientation = xlRowField .Position = 1 End With ActiveSheet.PivotTables("PivotTable4").AddDataField ActiveSheet.PivotTables( _ "PivotTable4").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyMonth" ActiveChart.ChartTitle.Text = "Incidents by Month" Dim RngToCover2 As Range Dim ChtOb2 As ChartObject Set RngToCover2 = ActiveSheet.Range("D18:L30") Set ChtOb2 = ActiveSheet.ChartObjects("IncidentbyMonth") ChtOb2.Height = RngToCover2.Height ' resize ChtOb2.Width = RngToCover2.Width ' resize ChtOb2.Top = RngToCover2.Top ' reposition ChtOb2.Left = RngToCover2.Left ' reposition ' ' IncidentbyCategory Macro ' ' Sheets("Frontpage").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R38C1", TableName:="PivotTable6", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(38, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$38:$H$119") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 2") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable6").PivotFields("Category 3") .Orientation = xlPageField .Position = 1 End With ActiveSheet.PivotTables("PivotTable6").AddDataField ActiveSheet.PivotTables( _ "PivotTable6").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbyCategory" ActiveChart.ChartTitle.Text = "Incidents by Category" Dim RngToCover3 As Range Dim ChtOb3 As ChartObject Set RngToCover3 = ActiveSheet.Range("D38:L56") Set ChtOb3 = ActiveSheet.ChartObjects("IncidentbyCategory") ChtOb3.Height = RngToCover3.Height ' resize ChtOb3.Width = RngToCover3.Width ' resize ChtOb3.Top = RngToCover3.Top ' reposition ChtOb3.Left = RngToCover3.Left ' reposition ' ' IncidentsbySiteandPriority Macro ' ' Sheets("Frontpage").Select Range("A71").Select ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _ "raw!R1C1:R65536C37", Version:=xlPivotTableVersion10).CreatePivotTable _ TableDestination:="Frontpage!R71C1", TableName:="PivotTable3", _ DefaultVersion:=xlPivotTableVersion10 Sheets("Frontpage").Select Cells(71, 1).Select ActiveSheet.Shapes.AddChart.Select ActiveChart.SetSourceData Source:=Range("Frontpage!$A$71:$H$90") ActiveChart.ChartType = xlColumnClustered With ActiveSheet.PivotTables("PivotTable3").PivotFields("Site Name") .Orientation = xlRowField .Position = 1 End With With ActiveSheet.PivotTables("PivotTable3").PivotFields("Priority") .Orientation = xlColumnField .Position = 1 End With ActiveSheet.PivotTables("PivotTable3").AddDataField ActiveSheet.PivotTables( _ "PivotTable3").PivotFields("Case ID"), "Count of Case ID", xlCount ActiveChart.Parent.Name = "IncidentbySiteandPriority" ' ActiveChart.ChartTitle.Text = "Incidents by Site and Priority" Dim RngToCover4 As Range Dim ChtOb4 As ChartObject Set RngToCover4 = ActiveSheet.Range("H71:O91") Set ChtOb4 = ActiveSheet.ChartObjects("IncidentbySiteandPriority") ChtOb4.Height = RngToCover4.Height ' resize ChtOb4.Width = RngToCover4.Width ' resize ChtOb4.Top = RngToCover4.Top ' reposition ChtOb4.Left = RngToCover4.Left ' reposition Columns("A:G").Select Range("A52").Activate Columns("A:G").EntireColumn.AutoFit End Sub

    Read the article

  • Outlook 2003 Addin, How to open Select name dialog?

    - by IamStalker
    Hi, i know that is not so easy question, but i have to ask this cause i am struggling with it for almost two weeks maybe more... How can i open a SELECT NAMES DIALOG (Contacts) in Outlook2003 Addin C#? I know how to do it in 2007 and it's doesn't work's in 2003 so please help me... I Develop with C# this addin and if i can find any code examples or maybe you can show me how to do it, it will be highly appreciated... Thanks in advance.

    Read the article

  • How to Embed Image in Outlook Signature?

    - by BlackMael
    Is it possible to create an HTML email signature for Outlook 2003 or above that doesn't reference external images? That is, using those special "cid" reference but embed the image itself in the signature and not on the file system or network. This is for an web application that generates a "standard" email signature based on various input from a user. It has worked fine so far with a single "embedded" image. But a new feature is going to require the possible addition of multiple tiny images. Getting to user to save one email signature template and one image to the user's machine is about the limit of what I'd like to require of the user. But forcing the user to save multiple images seem to be pushing things a little to far in my opinion. So my problem is trying to embed the images into without having to inconvenience the user with multiple downloads first.

    Read the article

  • app can not run on Windows 2003

    - by Carlos_Liu
    I have created a application base on .net framework 2.0 in a windows XP machine, then I copied the app to another Windows 2003 server machine which has installed .net framework 3.5 but the app can't be launched and throught the event view i got the following errors: Event Type: Error Event Source: .NET Runtime 2.0 Error Reporting Event Category: None Event ID: 5000 Date: 5/15/2010 Time: 2:19:39 PM User: N/A Computer: AVCNDAECLIU4 Description: EventType clr20r3, P1 ftacsearchpopup.exe, P2 1.0.0.0, P3 4bee3c42, P4 ftacsearchpopup, P5 1.0.0.0, P6 4bee3c42, P7 11, P8 e, P9 system.io.fileloadexception, P10 NIL. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 63 00 6c 00 72 00 32 00 c.l.r.2. 0008: 30 00 72 00 33 00 2c 00 0.r.3.,. 0010: 20 00 66 00 74 00 61 00 .f.t.a. 0018: 63 00 73 00 65 00 61 00 c.s.e.a. 0020: 72 00 63 00 68 00 70 00 r.c.h.p. 0028: 6f 00 70 00 75 00 70 00 o.p.u.p. 0030: 2e 00 65 00 78 00 65 00 ..e.x.e. 0038: 2c 00 20 00 31 00 2e 00 ,. .1... 0040: 30 00 2e 00 30 00 2e 00 0...0... 0048: 30 00 2c 00 20 00 34 00 0.,. .4. 0050: 62 00 65 00 65 00 33 00 b.e.e.3. 0058: 63 00 34 00 32 00 2c 00 c.4.2.,. 0060: 20 00 66 00 74 00 61 00 .f.t.a. 0068: 63 00 73 00 65 00 61 00 c.s.e.a. 0070: 72 00 63 00 68 00 70 00 r.c.h.p. 0078: 6f 00 70 00 75 00 70 00 o.p.u.p. 0080: 2c 00 20 00 31 00 2e 00 ,. .1... 0088: 30 00 2e 00 30 00 2e 00 0...0... 0090: 30 00 2c 00 20 00 34 00 0.,. .4. 0098: 62 00 65 00 65 00 33 00 b.e.e.3. 00a0: 63 00 34 00 32 00 2c 00 c.4.2.,. 00a8: 20 00 31 00 31 00 2c 00 .1.1.,. 00b0: 20 00 65 00 2c 00 20 00 .e.,. . 00b8: 73 00 79 00 73 00 74 00 s.y.s.t. 00c0: 65 00 6d 00 2e 00 69 00 e.m...i. 00c8: 6f 00 2e 00 66 00 69 00 o...f.i. 00d0: 6c 00 65 00 6c 00 6f 00 l.e.l.o. 00d8: 61 00 64 00 65 00 78 00 a.d.e.x. 00e0: 63 00 65 00 70 00 74 00 c.e.p.t. 00e8: 69 00 6f 00 6e 00 20 00 i.o.n. . 00f0: 4e 00 49 00 4c 00 0d 00 N.I.L... 00f8: 0a 00 ..

    Read the article

  • IIS6: Web Site presenting the wrong SSL certificate

    - by pcampbell
    Consider an IIS6 installation with multiple Web Sites. Each is intended to be a different subdomain with its own cert (not a wildcard cert). Each has their host-header specified properly. foo.example.com - port 443. Require SSL w/128 bit. Working properly! It presents its SSL cert properly to the browser. Configured for a specific IP address. bar.example.com - port 443. Require SSL w/128 bit. Configured for all unassigned addresses. When inspecting the IIS property page, it fully shows the cert for bar.example.com on the View Certificate button. This is a NEW web site that is having cert problems. It's presenting the cert for foo.example.com. Ouch! Question: can you have more than one subdomains both running on separate websites with SSL certs on the same port (443)? How would you configure 2 web sites on the same range of 'all unassigned' for the same port (443) ? Update: ignoring the cert error, when browsing to https://bar, the content served is from https://foo site. When NOT using SSL, browsing to http://bar serves the correct content from bar. Just one address is assigned to this DMZ server.

    Read the article

  • Web server connection to SQL Server: Response Packet [Malformed Packet]

    - by John Murdoch
    I am seeing very, very sluggish performance between my web server (which handles HTTP web services connections) and a separate server running Microsoft SQL Server 2008. I have been capturing packet traffic on the web server trying to understand why things are running so slowly. I am using Wireshark to capture the packet traffic. The apparent problem is that the web server is sending TDS packets to the data server--each packet followed by a response from the data server with Response Packet [Malformed Packet] in the Info field. The packet sent from the web server appears to have an invalid checksum. Has anyone seen this type of problem before? Any ideas?

    Read the article

  • Can't access SQL Server 2008 from workstations, but can from server

    - by Kev
    We have an app that can use mssql2k or 2k8. We've been using 2k but I decided to try 2k8 to compare. I installed in on our win2k3 server alongside mssql2k. In the ODBC applet on the server, I was able to set up access to 2k8, and it passes the test at the end successfully, whether I tell it to use Windows Authentication or an sql login. The latter is how the app always accessed mssql2k. The app works fine from the server, but when I try it on a workstation (winxpsp3), I get a window titled, "Microsoft SQL Server Login" that says: Connection failed: SQLState: '01000' SQL Server Error: 53 [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()). Connection failed: SQLState: '08001' SQL Server ERror: 17 [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. Then I get the ODBC login dialog, which I can't get to login correctly (I just keep getting the same error above), even copying and pasting a password after resetting it on the server, and whether "trusted" is checked or not. "Options" is disabled. The server was straight SERVERNAME for mssql2k, but for mssql2k8 it's called SERVERNAME\mssql2008. That works on the server, why not on the workstation? (Which I'm logged in as the same person on, BTW.)

    Read the article

  • OCS 2007: Issues with /LiveServer/MCUFactory

    - by routeNpingme
    I'm not really an Office Communications Server expert, but just trying to resolve some seemingly minor issues with a new install... The following error is occurring in the OCS event log, and when I try to visit https://servername:444/LiveServer/MCUFactory in Internet Explorer to test the address, I just get a "page cannot be displayed" error. I can telnet to port 444 on the server and verify that the port is open and listening. Any ideas? Event Type: Error Event Source: OCS MCU Infrastructure Event Category: (1022) Event ID: 61013 Date: 7/28/2009 Time: 8:47:42 AM User: N/A Computer: COMM2 Description: The process DataMCUSvc(1284) failed to send health notifications to the MCU factory at https://servername:444/LiveServer/MCUFactory/. Failure occurrences: 29, since 7/28/2009 8:40:27 AM. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

    Read the article

  • Helicon ISAPI Rewrite Proxy 500 Internal Server Error

    - by Rob Stevenson-Leggett
    Hi, I have a website running at www.domain.com. The client now wants the website to appear to be running under www.otherdomain.com/whatson/brand/ Since the website is umbraco it won't run under a subfolder. I wanted to use ISAPI rewrite to proxy requests to www.domain.com using the following rule in a .htaccess at www.otherdomain.com/whatson/brand/ RewriteRule ^(.*)$ http://www.domain.com/$1 [P,L] However, when I apply this I get an ugly 500 Internal Server Error. There's nothing in the event log. So I turned on ISAPI logging and can see the following 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (2) init rewrite engine with requested uri /whatson/brand/home.aspx Then it testing all the other rewrite rules on the server. Then this 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (1) Htaccess process request w:\websites\otherdomain.com\docs2\whatson\brand\.htaccess 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (3) applying pattern '^(.*)$' to uri 'home.aspx' 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (2) forcing proxy-throughput with http://www.domain.com/home.aspx 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (1) go-ahead with proxy request http://www.domain.com/home.aspx [OK] 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (2) rewrite 'home.aspx' -> '/whatson/brand/home.aspxx.rwhlp?p=0' 111.111.111.111 111.111.111.111 Tue, 12-Jan-2010 13:05:24 GMT [www.otherdomain.com/sid#2045305275][rid#26337200/initial] (2) internal redirect with /whatson/brand/home.aspxx.rwhlp?p=0 [INTERNAL REDIRECT] So it appears to work according to the logs, but I'm not seeing the page come through.. It's worth noting that www.domain.com and www.otherdomain.com are on the same box. LogLevel is 3 and RewriteLogLevel is 3 (I've tried with 9 and debug but there is too much traffic going through the other sites on the box) Any ideas?

    Read the article

  • cscript - Invalid procedure call or argument when running a vbs file

    - by quanta
    I've been trying to use check_time.vbs to check the Windows time. Here's the script: http://pastebin.com/NfUrCAqU The help message could be display: C:\Program Files\NSClient++\scripts>cscript //NoLogo check_time.vbs /? check_time.vbs V1.01 Usage: cscript /NoLogo check_time.vbs serverlist warn crit [biggest] Options: serverlist (required): one or more server names, coma-separated warn (required): warning offset in seconds, can be partial crit (required): critical offset in seconds, can be partial biggest (optional): if multiple servers, else use default least offset Example: cscript /NoLogo check_time.vbs myserver1,myserver2 0.4 5 biggest But I get the following error when running: C:\Program Files\NSClient++\scripts>cscript //NoLogo check_time.vbs 0.asia.pool.ntp.org 20 50 C:\Program Files\NSClient++\scripts\check_time.vbs(53, 1) Microsoft VBScript run time error: Invalid procedure call or argument The screenshot: Manually execute w32tm still works fine: What might be the cause of this?

    Read the article

  • Where is definitive download location MBSA's "wsusscn2.cab" file for offline mode scans?

    - by Chris W. Rea
    I'm running Microsoft Baseline Security Analyzer 2.1 against some servers that don't have outbound access to the Internet, by design of firewall restrictions, and therefore I'm wishing to run MBSA in offline mode. In order to do so, I need the list of updates in the file named "wsusscn2.cab". Is there a well-known page or URL at Microsoft for downloading the most up-to-date version of that file for MBSA offline mode? Thank you.

    Read the article

  • Alternative to robocopy /MIR

    - by Robin Day
    We run a number of web apps that store a lot of local data in small xml files. One part of our backup / recovery strategy is to produce a local mirror of the file system via a VPN to the hosting centre. The VPN connection is only via a 12Mbps ADSL and whilst there are a lot of files and directories, the actual number of files that changes is quite small. Although the bandwidth is probably an issue, I'm seeing results such as the output below. The robocopy /MIR took 5 hours to run yet only 30 mins to actually perform the copy. Does anyone have any suggestions as to ways to improve this. The 5 hours is now bordering on too slow and if we can't find a way to speed this up then we're going to have to come up with a completely different solution. Total Copied Skipped Mismatch FAILED Extras Dirs : 17625 6618 11007 0 0 0 Files : 1112430 1223 1111207 0 0 0 Bytes : 57.451 g 192.25 m 57.263 g 0 0 0 Times : 5:01:23 0:35:55 0:00:00 4:25:27 Speed : 93509 Bytes/sec. Speed : 5.350 MegaBytes/min. Ended : Fri Apr 16 05:54:23 2010

    Read the article

  • Change DPI of one user using W2K3 Remote Desktop / Terminal Server

    - by GvS
    In short: How do I increase the DPI of some (not all) of our customers connected to our RDP server? We are running a W2K3 Terminal Server that our clients connect to to run our application. One of our clients complains that all fonts / icons etc are too small. This user has a high DPI monitor. The DPI of the client OS (XP in this case) is not transferred to the server. To make things worse (or more interesting) the Display properties dialog disables the Advanced button that you can use to change the DPI on normal clients.

    Read the article

  • Sign an OpenSSL .CSR with Microsoft Certificate Authority

    - by kce
    I'm in the process of building a Debian FreeRadius server that does 802.1x authentication for domain members. I would like to sign my radius server's SSL certificate (used for EAP-TLS) and leverage the domain's existing PKI. The radius server is joined to domain via Samba and has a machine account as displayed in Active Directory Users and Computers. The domain controller I'm trying to sign my radius server's key against does not have IIS installed so I can't use the preferred Certsrv webpage to generate the certificate. The MMC tools won't work as it can't access the certificate stores on the radius server because they don't exist. This leaves the certreq.exe utility. I'm generating my .CSR with the following command: openssl req -nodes -newkey rsa:1024 -keyout server.key -out server.csr The resulting .CSR: ******@mis-ke-lnx:~/G$ openssl req -text -noout -in mis-radius-lnx.csr Certificate Request: Data: Version: 0 (0x0) Subject: C=US, ST=Alaska, L=CITY, O=ORG, OU=DEPT, CN=ME/emailAddress=MYEMAIL Subject Public Key Info: Public Key Algorithm: rsaEncryption RSA Public Key: (1024 bit) Modulus (1024 bit): 00:a8:b3:0d:4b:3f:fa:a4:5f:78:0c:24:24:23:ac: cf:c5:28:af:af:a2:9b:07:23:67:4c:77:b5:e8:8a: 08:2e:c5:a3:37:e1:05:53:41:f3:4b:e1:56:44:d2: 27:c6:90:df:ae:3b:79:e4:20:c2:e4:d1:3e:22:df: 03:60:08:b7:f0:6b:39:4d:b4:5e:15:f7:1d:90:e8: 46:10:28:38:6a:62:c2:39:80:5a:92:73:37:85:37: d3:3e:57:55:b8:93:a3:43:ac:2b:de:0f:f8:ab:44: 13:8e:48:29:d7:8d:ce:e2:1d:2a:b7:2b:9d:88:ea: 79:64:3f:9a:7b:90:13:87:63 Exponent: 65537 (0x10001) Attributes: a0:00 Signature Algorithm: sha1WithRSAEncryption 35:57:3a:ec:82:fc:0a:8b:90:9a:11:6b:56:e7:a8:e4:91:df: 73:1a:59:d6:5f:90:07:83:46:aa:55:54:1c:f9:28:3e:a6:42: 48:0d:6b:da:58:e4:f5:7f:81:ee:e2:66:71:78:85:bd:7f:6d: 02:b6:9c:32:ad:fa:1f:53:0a:b4:38:25:65:c2:e4:37:00:16: 53:d2:da:f2:ad:cb:92:2b:58:15:f4:ea:02:1c:a3:1c:1f:59: 4b:0f:6c:53:70:ef:47:60:b6:87:c7:2c:39:85:d8:54:84:a1: b4:67:f0:d3:32:f4:8e:b3:76:04:a8:65:48:58:ad:3a:d2:c9: 3d:63 I'm trying to submit my certificate using the following certreq.exe command: certreq -submit -attrib "CertificateTemplate:Machine" server.csr I receive the following error upon doing so: RequestId: 601 Certificate not issued (Denied) Denied by Policy Module The DNS name is unavailable and cannot be added to the Subject Alternate name. 0x8009480f (-2146875377) Certificate Request Processor: The DNS name is unavailable and cannot be added to the Subject Alternate name. 0x8009480f (-2146875377) Denied by Policy Module My certificate authority has the following certificate templates available. If I try to submit by certreq.exe using "CertificiateTemplate:Computer" instead of "CertificateTemplate:Machine" I get an error reporting that "the requested certificate template is not supported by this CA." My google-foo has failed me so far on trying to understand this error... I feel like this should be a relatively simple task as X.509 is X.509 and OpenSSL generates the .CSRs in the required PKCS10 format. I can't be only one out there trying to sign a OpenSSL generated key on a Linux box with a Windows Certificate Authority, so how do I do this (perferably using the off-line certreq.exe tool)?

    Read the article

  • Correct configuration of a reverse Proxy with IIS 6.0 and IIRF for Hudson

    - by Durden81
    I have an Hudson build working on IIS 6.0 with reverse proxy (IIRF). In general it works but 2 errors are displayed in Hudson in the main configuration page called "Manage Hudson" (only if I connect through the reverse proxy): Your container doesn't use UTF-8 to decode URLs. If you use non-ASCII characters as a job name etc, this will cause problems. See Containers and Tomcat i18n for more details. It appears that your reverse proxy set up is broken This is my configuration of IIRF: RewriteLog C:\logsIIRF.txt RewriteLogLevel 2 IterationLimit 10 MaxMatchCount 10 RewriteEngine ON StatusInquiry ON UrlDecoding 0FF # add a trailing slash: RedirectRule ^/hudson$ /hudson/ [I] # Does the reverse Proxy ProxyPass ^/hudson/(.*)$ http://localhost:8080/hudson/$1 [I] ProxyPassReverse /hudson http://localhost:8080/hudson Any suggestion on how to get rid of those errors?

    Read the article

  • Very High Interrupt CPU usage in Win2k3 VM on vSphere

    - by Darragh
    Hi, I've been testing some software in a server virtual environment and I've noticed I get a huge amount of CPU usage on the Interrupts process. My question is, how does this relate to the virtual hardware platform as the rate is allot lower in a real system. Some how the hypervizor scheduler works hard to over come this problem but not as well as on real hardware does. Obvious things are high I/O and disk access but this application mostly just sits and works in memory allot. If anyone has experienced the same, please let me know. thanks in advance Screenshot: Process Explorer

    Read the article

  • How do I get around "Access is Denied" [Number: 5 (0x80070005)], with IIS6/FastCGI and PHP 5.2.3?

    - by Evan Carroll
    I'm getting this error with IIS 6.0 (i assume), and PHP 5.2.3, and FastCGI FastCGI Error The FastCGI Handler was unable to process the request. Error Details: Error Number: 5 (0x80070005). Error Description: Access is denied. HTTP Error 500 - Server Error. Internet Information Services (IIS) Any ideas, nothing revealings in logs (other than 500 errors), this is pretty much all of I have to work with. The script has read and execute privileged for the internet guest account; and, I've added read/execute privileges to the whole D:\PHP. I followed this tutorial http://learn.iis.net/page.aspx/247/using-fastcgi-to-host-php-applications-on-iis-60/ to set it up. The only major diversion is I installed PHP to D:\PHP

    Read the article

  • MOSS Upload Size?

    - by littlegeek
    Hi In MOSS we have done all of this to increase the file upload size, reset iis but still doesnt want to play = anyone any advice. UPDATE Just seen the Scott Gu article - http://weblogs.asp.net/pscott/archive/2009/02/26/404-errors-with-fileupload-with-iis7.aspx and JS example http://msmvps.com/blogs/cgross/archive/2009/02/25/large-files-in-sbs-2008-s-companyweb.aspx So need to say this is II6 on win2k3 Update 2 still not working at a loss anyone help? In SharePoint 3.0 Central Adminisration, Application Management tab, and Web application general settings configure the Maximum upload size to a maximum of 2047 MB. - We set ours to 250MB In Internet Information Services on the properties of the virtual server increase the Connection Timeout to greater than default 120 seconds depending on the time to upload large files in your environment for example, 360 seconds. - We set ours to 600 Secs Configure the web.config for the _layouts web.config with On the SharePoint server change C:\Program Files\Common Files\Microsoft Shared\web server extensions\12\TEMPLATE\LAYOUTS\web.config with an executionTimeout appropriate for the file size you are uploading. An example is included below. from: to: executionTimeout="999999" maxRequestLength="2097151" /

    Read the article

  • SSL Certifcate Request s2003 DC CA DNS Name not Avaiable.

    - by Beuy
    I am trying to submit a request for an SSL certificate on a Domain Controller in order to enable LDAP SSL, and having no end of problems. I am following the information provided at http://support.microsoft.com/default.aspx?scid=kb;en-us;321051 & http://adldap.sourceforge.net/wiki/doku.php?id=ldap_over_ssl Steps taken so far: Create Servername.inf with the following information ;----------------- request.inf ----------------- [Version] Signature="$Windows NT$ [NewRequest] Subject = "CN=servername.domain.loc" ; replace with the FQDN of the DC KeySpec = 1 KeyLength = 1024 ; Can be 1024, 2048, 4096, 8192, or 16384. ; Larger key sizes are more secure, but have ; a greater impact on performance. Exportable = TRUE MachineKeySet = TRUE SMIME = False PrivateKeyArchive = FALSE UserProtected = FALSE UseExistingKeySet = FALSE ProviderName = "Microsoft RSA SChannel Cryptographic Provider" ProviderType = 12 RequestType = PKCS10 KeyUsage = 0xa0 [EnhancedKeyUsageExtension] OID=1.3.6.1.5.5.7.3.1 ; this is for Server Authentication ;----------------------------------------------- Create Certificate request by running: certreq -new Servername.inf Servername.req Attempt to submit Certificate request to CA by running: certreq -submit -attrib "CertificateTemplate: DomainController" request.req At which point I get the following error: The DNS name is unavailable and cannot be added to the Subject Alternate Name. 0x8009480f (-2146875377) Trouble shooting steps I have taken so far 1. Modify the Domain Controller Template to supply Subject Name in Request restart Certificate Service, include SAN in Request, same error. 2. Re-installed Certificate Services / IIS / Restarted machine countless times Any help resolving the issue would be greatly appreciated.

    Read the article

  • SQL Server 2008 to Sybase Linked Server (x64) -- Provider and permissions issues

    - by Cory Larson
    Good morning, We're testing a new SQL Server 2008 setup (64-bit) and one of our requirements was to get a linked server up and talking to a Sybase database. We've successfully done so using Sybase's 64-bit 15.5 drivers, however I can't expand the catalog list from a remote machine (connecting to the '08 box with SSMS) without having my network account being added as an Administrator on the actual box and then using Windows Authentication to connect to the server instance. This is going to be problematic when we go live. Has anybody experienced this, or have any input on the permissions in SQL Server 2008 with regards to linked servers? If I remove my network account from the Administrators group, the big error I'm getting is a 'Msg 7302, Level 16, State 1, Line 41' with a description something like "Cannot create an instance of OLE DB provider "ASEOLEDB" for linked server "", and all research points to permissions issues. Thoughts? This document talks about DCOM configuration and permissions, but we've tried all of it with no luck. Thanks

    Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >