paul van valkenburgh - Page 96

SQL SERVER – SHRINKFILE and TRUNCATE Log File in SQL Server 2008

- by pinaldave

Note: Please read the complete post before taking any actions. This blog post would discuss SHRINKFILE and TRUNCATE Log File. The script mentioned in the email received from reader contains the following questionable code: “Hi Pinal, If you could remember, I and my manager met you at TechEd in Bangalore. We just upgraded to SQL Server 2008. One of our jobs failed as it was using the following code. The error was: Msg 155, Level 15, State 1, Line 1 ‘TRUNCATE_ONLY’ is not a recognized BACKUP option. The code was: DBCC SHRINKFILE(TestDBLog, 1) BACKUP LOG TestDB WITH TRUNCATE_ONLY DBCC SHRINKFILE(TestDBLog, 1) GO I have modified that code to subsequent code and it works fine. But, are there other suggestions you have at the moment? USE [master] GO ALTER DATABASE [TestDb] SET RECOVERY SIMPLE WITH NO_WAIT DBCC SHRINKFILE(TestDbLog, 1) ALTER DATABASE [TestDb] SET RECOVERY FULL WITH NO_WAIT GO Configuration of our server and system is as follows: [Removed not relevant data]“ An email like this that suddenly pops out in early morning is alarming email. Because I am a dead, busy mind, so I had only one min to reply. I wrote down quickly the following note. (As I said, it was a single-minute email so it is not completely accurate). Here is that quick email shared with all of you. “Hi Mr. DBA [removed the name] Thanks for your email. I suggest you stop this practice. There are many issues included here, but I would list two major issues: 1) From the setting database to simple recovery, shrinking the file and once again setting in full recovery, you are in fact losing your valuable log data and will be not able to restore point in time. Not only that, you will also not able to use subsequent log files. 2) Shrinking file or database adds fragmentation. There are a lot of things you can do. First, start taking proper log backup using following command instead of truncating them and losing them frequently. BACKUP LOG [TestDb] TO DISK = N'C:\Backup\TestDb.bak' GO Remove the code of SHRINKING the file. If you are taking proper log backups, your log file usually (again usually, special cases are excluded) do not grow very big. There are so many things to add here, but you can call me on my [phone number]. Before you call me, I suggest for accuracy you read Paul Randel‘s two posts here and here and Brent Ozar‘s Post here. Kind Regards, Pinal Dave” I guess this post is very much clear to you. Please leave your comments here. As mentioned, this is a very huge subject; I have just touched a tip of the ice-berg and have tried to point to authentic knowledge. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Backup and Restore, SQL Data Storage, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Control to Control Binding in WPF/Silverlight

- by psheriff

In the past if you had two controls that you needed to work together, you would have to write code. For example, if you want a label control to display any text a user typed into a text box you would write code to do that. If you want turn off a set of controls when a user checks a check box, you would also have to write code. However, with XAML, these operations become very easy to do. Bind Text Box to Text Block As a basic example of this functionality, let’s bind a TextBlock control to a TextBox. When the user types into a TextBox the value typed in will show up in the TextBlock control as well. To try this out, create a new Silverlight or WPF application in Visual Studio. On the main window or user control type in the following XAML. <StackPanel> <TextBox Margin="10" x:Name="txtData" /> <TextBlock Margin="10" Text="{Binding ElementName=txtData, Path=Text}" /></StackPanel> Now run the application and type into the TextBox control. As you type you will see the data you type also appear in the TextBlock control. The {Binding} markup extension is responsible for this behavior. You set the ElementName attribute of the Binding markup to the name of the control that you wish to bind to. You then set the Path attribute to the name of the property of that control you wish to bind to. That’s all there is to it! Bind the IsEnabled Property Now let’s apply this concept to something that you might use in a business application. Consider the following two screen shots. The idea is that if the Add Benefits check box is un-checked, then the IsEnabled property of the three “Benefits” check boxes will be set to false (Figure 1). If the Add Benefits check box is checked, then the IsEnabled property of the “Benefits” check boxes will be set to true (Figure 2). Figure 1: Uncheck Add Benefits and the Benefits will be disabled. Figure 2: Check Add Benefits and the Benefits will be enabled. To accomplish this, you would write XAML to bind to each of the check boxes in the “Benefits To Add” section to the check box named chkBenefits. Below is a fragment of the XAML code that would be used. <CheckBox x:Name="chkBenefits" /> <CheckBox Content="401k" IsEnabled="{Binding ElementName=chkBenefits, Path=IsChecked}" /> Since the IsEnabled property is a boolean type and the IsChecked property is also a boolean type, you can bind these two together. If they were different types, or if you needed them to set the IsEnabled property to the inverse of the IsChecked property then you would need to use a ValueConverter class. SummaryOnce you understand the basics of data binding in XAML, you can eliminate a lot code. Connecting controls together is as easy as just setting the ElementName and Path properties of the Binding markup extension. NOTE: You can download the complete sample code at my website. http://www.pdsa.com/downloads. Choose Tips & Tricks, then "SL – Basic Control Binding" from the drop-down. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free eBook on "Fundamentals of N-Tier".

Read the article

2010 Collaboration Summit Impressions

- by Elena Zannoni

It's a bit late, but there you have it anyway. April 14 to 16 I attended the Linux Foundation Collaboration Summit in SFO. I was running two tracks, one on tracing and one on tools. You can see the tracks and the slides here: http://events.linuxfoundation.org/events/collaboration-summit/slides I was pretty busy both days, Thursday with a whole day tracing track, Friday with a half day toolchain track. The sessions were well attended, the rooms were full, with people spilling in the hallways. Some new things were presented, like Kernelshark, by Steve Rostedt, a GUI (yes, believe it or not, a GUI) written in GTK. It is very nice, showing a timeline for traced kernel events, and you can zoom in and filter at will. It works on the latest kernels, and it requires some new things/fixes in GTK. I don't recall exactly what version of GTK though. Dominique Toupin from Ericsson presented something about user requirements for tracing. Mostly though about who's who in the embedded world, and eclipse. Masami and Mathieu presented an update on their work. See their slides. The interesting thing to me was of course the new version of uprobes w/o underlying utrace presented by Jim Keniston. At the end of the session we had a discussion about the future of utrace. Roland wasn't there, butTom Tromey (also from RedHat) collected the feedback. Basically we are at a standstill now that utrace has been rejected yet again. There wasn't much advise that anybody could give, except jokingly, we decided that the only way in is to make it a part of perf events. There needs to be another refactoring, but most of all, this "killer app" that would be enabled because of utrace hasn't materialized yet. We think that having a good debugging story on Linux is enough of a killer app, for instance allowing multiple tracers, and not relying on SIGCHLD etc. I think this wasn't completely clear to the kernel community. Trying to achieve debugging via a gdb stub inside the kernel interfacing to utrace and that is controlled via the gdb remote protocol also lost its appeal (thankfully, since the gdb remote protocol is archaic). Somebody would have to be creative in how to submit utrace. It doesn't have to be called utrace (it was really a random choice, for lack of a letter that was not already used in front of the word "trace"). So basically, I think the ideas behind utrace are sound, and the necessity of a new interface is acknowledged. But I believe the integration/submission process with the kernel folks has to restart from scratch, clean slate. We'll see. There are many conferences and meetings coming up in the near future where things can be discussed further. On the second day, Friday, we had the tools talks. It was interesting to observe the more "kernel" oriented people's behavior towards the gcc etc community. The first talk was by Mark Mitchell, about Gcc and its new plugin architecture. After that, Paolo talked about the new C++1x standard, which will be finalized in 2011. Many features are already implemented in the libstdc++ library and gcc and usable today. We had a few minutes (really, the half day track was quite short) where Bradley Kuhn from the Software Freedom Law Center explained the GPLv3 exception for gcc (due to the new gcc plugin architecture and the availability of the intermediate results from the compilation, which is a new thing). I will not try to explain, but basically you cannot take the result of the preprocessing and then use that in your own proprietary compiler. After, we had a talk by Ian Taylor about the new Gold linker. One good thing in that area is that they are trying to make gold the new default linker (for instance Fedora will use gold as the distro linker). However gold is very different from binutils' old linker. It doesn't use a linker script, for instance. The kernel has been linked with gold many times as an exercise (the ground work was done by Kris Van Hees), but this needs to be constantly tested/monitored because the kernel linker script is very complex, and uses esoteric features (Wenji is now monitoring that each kernel RC can be built with gold). It was positive that people are now aware of gold and the need for it to be ported to more architectures. It seems that the porting is very easy, with little arch dependent code. Finally Tom Tromey presented about gdb and the archer project. Archer is a development branch of gdb mostly done by RedHat, where they are focusing on better c++ printing, c++ expression parsing, and plugins. The archer work is merged regularly in the gdb mainline. In general it was a good conference. I did miss most of the first day, because that's when I flew in. But I caught a couple of talks. Nothing earth shattering, except for Google giving each person registered a free Android phone. Yey.

Read the article

It’s A Team Sport: PASS Board Year 2, Q3

- by Denise McInerney

As I type this I’m on an airplane en route to my 12th PASS Summit. It’s been a very busy 3.5 months since my last post on my work as a Board member. Nearing the end of my 2-year term I am struck by how much has happened, and yet how fast the time has gone. But I’ll save the retrospective post for next time and today focus on what happened in Q3. In the last three months we made progress on several fronts, thanks to the contributions of many volunteers and HQ staff members. They deserve our appreciation for their dedication to delivering for the membership week after week. Virtual Chapters The Virtual Chapters continue to provide many PASS members with valuable free training. Between July and September of 2013 VCs hosted over 50 webinars with a total of 4300 attendees. This quarter also saw the launch of the Security & Global Russian VCs. Both are off to a strong start and I welcome these additions to the Virtual Chapter portfolio. At the beginning of 2012 we had 14 Virtual Chapters. Today we have 22. This growth has been exciting to see. It has also created a need to have more volunteers help manage the work of the VCs year-round. We have renewed focus on having Virtual Chapter Mentors work with the VC Leaders and other volunteers. I am grateful to volunteers Julie Koesmarno, Thomas LeBlanc and Marcus Bittencourt who join original VC Mentor Steve Simon on this team. Thank you for stepping up to help. Many improvements to the VC web sites have been rolling out over the past few weeks. Our marketing and IT teams have been busy working a new look-and-feel, features and a logo for each VC. They have given the VCs a fresh, professional look consistent with the rest of the PASS branding, and all VCs now have a logo that connects to PASS and the particular focus of the chapter. 24 Hours of PASS The Summit Preview edition of 24HOP was held on July 31 and by all accounts was a success. Our first use of the GoToWebinar platform for this event went extremely well. Thanks to our speakers, moderators and sponsors for making this event possible. Special thanks to HQ staffers Vicki Van Damme and Jane Duffy for a smoothly run event. Coming up: the 24HOP Portuguese Edition will be held November 13-14, followed December 12-13 by the Spanish Edition. Thanks to the Portuguese- and Spanish-speaking community volunteers who are organizing these events. July Board Meeting The Board met July 18-19 in Kansas City. The first order of business was the election of the Executive Committee who will take office January 1. I was elected Vice President of Marketing and will join incoming President Thomas LaRock, incoming Executive Vice President of Finance Adam Jorgensen and Immediate Past President Bill Graziano on the Exec Co. I am honored that my fellow Board members elected me to this position and look forward to serving the organization in this role. Visit to PASS HQ In late September I traveled to Vancouver for my first visit to PASS HQ, where I joined Tom LaRock and Adam Jorgensen to make plans for 2014. Our visit was just a few weeks before PASS Summit and coincided with the Board election, and the office was humming with activity. I saw first-hand the enthusiasm and dedication of everyone there. In each interaction I observed a focus on what is best for PASS and our members. Our partners at HQ are key to the organization’s success. This week at PASS Summit is a great opportunity for all of us to remember that, and say “thanks.” Next Up PASS Summit—of course! I’ll be around all week and look forward to connecting with many of our member over meals, at the Community Zone and between sessions. In the evenings you can find me at the Welcome Reception, Exhibitor’s Reception and Community Appreciation Party. And I will be at the Board Q&A session Friday at 12:45 p.m. Transitions The newly elected Exec Co and Board members take office January 1, and the Virtual Chapter portfolio is transitioning to a new director. I’m thrilled that Jen Stirrup will be taking over. Jen has experience as a volunteer and co-leader of the Business Intelligence Virtual Chapter and was a key contributor to the BI VCs expansion to serving our members in the EMEA region. I’ll be working closely with Jen over the next couple of months to ensure a smooth transition.

Read the article

An Alphabet of Eponymous Aphorisms, Programming Paradigms, Software Sayings, Annoying Alliteration

- by Brian Schroer

Malcolm Anderson blogged about “Einstein’s Razor” yesterday, which reminded me of my favorite software development “law”, the name of which I can never remember. It took much Wikipedia-ing to find it (Hofstadter’s Law – see below), but along the way I compiled the following list: Amara’s Law: We tend to overestimate the effect of a technology in the short run and underestimate the effect in the long run. Brook’s Law: Adding manpower to a late software project makes it later. Clarke’s Third Law: Any sufficiently advanced technology is indistinguishable from magic. Law of Demeter: Each unit should only talk to its friends; don't talk to strangers. Einstein’s Razor: “Make things as simple as possible, but not simpler” is the popular paraphrase, but what he actually said was “It can scarcely be denied that the supreme goal of all theory is to make the irreducible basic elements as simple and as few as possible without having to surrender the adequate representation of a single datum of experience”, an overly complicated quote which is an obvious violation of Einstein’s Razor. (You can tell by looking at a picture of Einstein that the dude was hardly an expert on razors or other grooming apparati.) Finagle's Law of Dynamic Negatives: Anything that can go wrong, will—at the worst possible moment. - O'Toole's Corollary: The perversity of the Universe tends towards a maximum. Greenspun's Tenth Rule: Any sufficiently complicated C or Fortran program contains an ad hoc, informally-specified, bug-ridden, slow implementation of half of Common Lisp. (Morris’s Corollary: “…including Common Lisp”) Hofstadter's Law: It always takes longer than you expect, even when you take into account Hofstadter's Law. Issawi’s Omelet Analogy: One cannot make an omelet without breaking eggs - but it is amazing how many eggs one can break without making a decent omelet. Jackson’s Rules of Optimization: Rule 1: Don't do it. Rule 2 (for experts only): Don't do it yet. Kaner’s Caveat: A program which perfectly meets a lousy specification is a lousy program. Liskov Substitution Principle (paraphrased): Functions that use pointers or references to base classes must be able to use objects of derived classes without knowing it Mason’s Maxim: Since human beings themselves are not fully debugged yet, there will be bugs in your code no matter what you do. Nils-Peter Nelson’s Nil I/O Rule: The fastest I/O is no I/O. Occam's Razor: The simplest explanation is usually the correct one. Parkinson’s Law: Work expands so as to fill the time available for its completion. Quentin Tarantino’s Pie Principle: “…you want to go home have a drink and go and eat pie and talk about it.” (OK, he was talking about movies, not software, but I couldn’t find a “Q” quote about software. And wouldn’t it be cool to write a program so great that the users want to eat pie and talk about it?) Raymond’s Rule: Computer science education cannot make anybody an expert programmer any more than studying brushes and pigment can make somebody an expert painter. Sowa's Law of Standards: Whenever a major organization develops a new system as an official standard for X, the primary result is the widespread adoption of some simpler system as a de facto standard for X. Turing’s Tenet: We shall do a much better programming job, provided we approach the task with a full appreciation of its tremendous difficulty, provided that we respect the intrinsic limitations of the human mind and approach the task as very humble programmers. Udi Dahan’s Race Condition Rule: If you think you have a race condition, you don’t understand the domain well enough. These rules didn’t exist in the age of paper, there is no reason for them to exist in the age of computers. When you have race conditions, go back to the business and find out actual rules. Van Vleck’s Kvetching: We know about as much about software quality problems as they knew about the Black Plague in the 1600s. We've seen the victims' agonies and helped burn the corpses. We don't know what causes it; we don't really know if there is only one disease. We just suffer -- and keep pouring our sewage into our water supply. Wheeler’s Law: All problems in computer science can be solved by another level of indirection... Except for the problem of too many layers of indirection. Wheeler also said “Compatibility means deliberately repeating other people's mistakes.”. The Wrong Road Rule of Mr. X (anonymous): No matter how far down the wrong road you've gone, turn back. Yourdon’s Rule of Two Feet: If you think your management doesn't know what it's doing or that your organisation turns out low-quality software crap that embarrasses you, then leave. Zawinski's Law of Software Envelopment: Every program attempts to expand until it can read mail. Zawinski is also responsible for “Some people, when confronted with a problem, think 'I know, I'll use regular expressions.' Now they have two problems.” He once commented about X Windows widget toolkits: “Using these toolkits is like trying to make a bookshelf out of mashed potatoes.”

Read the article

It’s the thought that counts…

- by Tony Davis

I recently finished editing a book called Tribal SQL, and it was a fantastic experience. It’s a community-sourced book written by first-timers. Fifteen previously unpublished authors contributed one chapter each, with the seemingly simple remit to write about “what makes them passionate about working with SQL Server, something that all SQL Server DBAs and developers really need to know”. Sure, some of the writing skills were a bit rusty as one would expect from busy people, but the ideas and energy were sheer nectar. Any seasoned editor can deal easily with the problem of fixing the output of untrained writers. We can handle with the occasional technical error too, which is why we have technical reviewers. The editor’s real job is to hone the clarity and flow of ideas, making the author’s knowledge and experience accessible to as many others as possible. What the writer needs to bring, on the other hand, is enthusiasm, attention to detail, common sense, and a sense of the person behind the writing. If any of these are missing, no editor can fix it. We can see these essential characteristics in many of the more seasoned and widely-published writers about SQL. To illustrate what I mean by enthusiasm, or passion, take a look at the work of Laerte Junior or Fabiano Amorim. Both authors have English as a second language, but their energy, enthusiasm, sheer immersion in a technology and thirst to know more, drives them, with a little editorial help, to produce articles of far more practical value than one can find in the “manuals”. There’s the attention to detail of the likes of Jonathan Kehayias, or Paul Randal. Read their work and one begins to understand the knowledge coupled with incredible rigor, the willingness to bend and test every piece of advice offered to make sure it’s correct, that marks out the very best technical writing. There’s the common sense of someone like Louis Davidson. All writers, including Louis, like to stretch the grey matter of their readers, but some of the most valuable writing is that which takes a complicated idea, or distils years of experience, and expresses it in a way that sounds like simple common sense. There’s personality and humor. Contrary to what you may have been told, they can and do mix well with technical writing, as long as they don’t become a distraction. Read someone like Rodney Landrum, or Phil Factor, for numerous examples of articles that teach hard technical lessons but also make you smile at least twice along the way. Writing well is not easy and it takes a certain bravery to expose your ideas and knowledge for dissection by others, but it doesn’t mean that writing should be the preserve only of those trained in the art, or best left to the MVPs. I believe that Tribal SQL is testament to the fact that if you have passion for what you do, and really know your topic then, with a little editorial help, you can write, and people will learn from what you have to say. You can read a sample chapter, by Mark Rasmussen, in this issue of Simple-Talk and I hope you’ll consider checking out the book (if you needed any further encouragement, it’s also for a good cause, Computers4Africa). Cheers, Tony

Read the article

Stir Trek: Iron Man Edition Recap and Photos

- by Brian Jackett

If you’ve noticed my blogging activity has reduced in frequency and technical content lately it’s primarily due to all of the conferences I’ve been attending, speaking at, or planning in the past few months. This past Friday myself and six other dedicated individuals put on Stir Trek: Iron Man Edition as the culmination of a few months of hard work. For those unfamiliar, Stir Trek is a web developer conference that was founded last year as an event to showcase content from Microsoft’s MIX conference and end the day with a private showing of the then just-released Star Trek movie. This year’s conference expanded from 2 to 4 content tracks and upped the number of tickets from 350 to 600. Even more amazing was the fact that we had 592 people show up day of the event for the lowest drop-off percentage of any conference I’ve been to before. Nerd Dinner and Swag Bags The night before Stir Trek: Iron Man Edition we hosted a nerd dinner at the Polaris Shopping mall food court with about 30 in attendance. Nerd dinners are a great time to meet others passionate about technology and socialize before the whirlwind of the conference hits. After the nerd dinner 20+ volunteers headed to the conference location and helped us stuff swag bags. This in and of itself was a monumental task of putting together 600 swag bags with numerous leaflets, sponsor items, and t-shirts. A big thanks goes out to all who assisted us that night so that we could finish in just under 2 hours instead of taking all night. My sleep schedule also thanks you. Morning of Stir Trek After getting a decent amount of sleep I arrived at Marcus Crosswoods theater at 6am to begin setting up for the day. Myself and Jody Morgan were in charge of registration so we got tables set up, laid out swag bags, and organized our volunteer crew to assist with checking-in attendees. Despite having 600+ people registration went fairly smoothly and got the day off to a great start. I especially appreciated the 3+ cups of coffee from Crimson Cup, a local coffee shop. For any of you that know me you’ll know that I rarely drink coffee except a few times a year when I really need the energy, so that says a lot about how good their coffee is. Conference Starts Once registration was completed the day kicked off with Molly Holzschlag keynoting. Unfortunately Molly suffered from an ear infection and wasn’t able to fly so she had a virtual keynote and a session later in the day. I was working behind the scenes on various tasks so I was only able to drop in very briefly on the keynote and rest of the morning sessions. Throughout the day I tried to grab at least 1 or 2 pics of each presenter. See my album below for the full set of pics. For lunch we ordered around 150 pizzas from Mellow Mushroom, a local pizza place (notice the theme of supporting local businesses.) Early on we were concerned about Mellow Mushroom being able to supply that many pizzas and get them delivered (still hot) to the theater, but they did an excellent job day of the event. I wish I had gotten some pictures of the old school VW van they delivered the pizza in, but I was just a bit busy running around trying to get theaters ready for lunch. We had attendees from last year who specifically requested that we have Mellow Mushroom supply lunch this year and I’m glad everything worked out being able to use them again. During the afternoon I was able to attend a few sessions and hear some great content from various speakers. It was also nice to just sit down and get off my feet for a bit. After the last sessions the day concluded with a raffle. There were a few logistical and technical issues that hampered our ability to smoothly conduct the raffle. To those of you that agree the raffle wasn’t the smoothest experience I would like to say that the Stir Trek planning committee has already begun meeting to discuss ways of improving the conference for next year. We are also accepting feedback (both positive and negative) at the following link: click here. If you don’t wish to use the Joind In site you can also email me directly and I’ll be sure to pass along the feedback. Iron Man 2 Movie Last but not least, what Stir Trek event would be complete without the feature movie. This year’s movie was Iron Man 2. The theater had some really cool props and promotions (see pic below) for the movie. I really enjoyed Iron Man 2, but I would recommend brushing up on the Iron Man comics and Marvel’s plans for future movies to understand some of the plot elements that come up. Also make sure you stay through to the end of the movie credits to see a sneak peak of something special, that’s all I’ll say. Conclusion Again a big thanks goes out to all of the speakers, sponsors, attendees, movie theater staff, volunteers, and everyone else involved in making this event great. Also big thanks to my fellow Stir Trek planning committee members: Jeff Blankenburg, Matt Casto, Carey Payette, Jody Morgan, Rick Kierner, and Sarah Dutkiewitcz. I am grateful for everything I learned while helping plan this event and look forward to being involved again next year. For those interested we are currently targeting Thor as our movie theme for 2011 and then The Avengers for 2012. These are tentative based on release dates that could shift as we get closer, but for now look solid. Photos Pics on Facebook (includes tagging) Stir Trek: Iron Man Edition photos on Facebook Pics on Live site (higher res) View Full Album -Frog Out

Read the article

WebLogic 12.1.2 launch webcast on-demand & WebLogic Community feedback

- by JuergenKress

You missed the WebLogic & Coherence & JDeveloper 12.1.2 launch Webcast? Watch it on-demand: View On-Demand Version Read the Q&A from this Webcast Special thanks for Frank Munz and Simon Haslams our WebLogic Community experts on the phone!Thanks for the community for the great twitter feedback send us your tweets @wlscommunity #WebLogicCommunity WebLogic Community Join the #WebLogic Partner Community for the latest WebLogic 12.1.2 details and upcoming trainings http://www.WeblogicCommunity.com #OracleCAF Oracle WebLogic ?Unified update, patch, install process is a key component in reducing Ops cost in #WebLogic 12c #OracleCAF WebLogic Community Demo time #WebLogic cluster creation in seconds #OracleCAF by @mike_lehmann & Will Lyons #WebLogicCommunity pic.twitter.com/gyb8YqnKco Oracle WebLogic ?Dynamic server clusters to scale apps - coming up in #WebLogic 12c launch. #OracleCAF http://pub.vitrue.com/lBmE Oracle WebLogic ?Key feature of #WebLogic 12.1.2 release: @Oracle Database 12c integration. #OracleCAF #OracleDB OTNArchBeat ?Many tech posts on #weblogic available on #oracleace Rene van Wijk's blog. #OracleCAF http://pub.vitrue.com/O9Cn Frank Munz ?Correct me if I am wrong, but this could be the first WebLogic 12.1.2 training ever: http://www.ausoug.org.au/insync13/insync13-frank-munz.html … Cloud Foundation ?.#WebLogic 12.1.2 deep dive starts NOW during #OracleCAF launch. #Coherence up next in a few minutes. http://pub.vitrue.com/HPHM Maciej Gruszka ?Watch http://www.youtube.com/watch?v=KiCoO_QGBsU&feature=c4-overview&list=UUrEIV9YO17leE9aJWamKEPw … at #WebLogic channel with @dave_cabelus about Elastic JMS Oracle WebLogic ?Pick up the new book by @frankmunz on WLS 12c http://amzn.to/1ceppgZ #WebLogic #OracleCAF OTNArchBeat ?@OTNArchBeat 31 Jul @frankmunz 's #WebLogic YouTube channel >> watch and learn #OracleCAF http://pub.vitrue.com/B4IM WebLogic Community ?@frankmunz WebLogic expert build elastic clouds with #WebLogic http://www.munzandmore.com/blog #OracleCAF #WebLogicCommunity pic.twitter.com/UK5UKjXUVl OTNArchBeat @frankmunz 's blog, covering #weblog #cloud and more #OracleCAF http://pub.vitrue.com/N8ST OTNArchBeat ?oracladmin: @simon_haslam 's Oracle Fusion Middleware blog #OracleCAF #oracleace http://pub.vitrue.com/cwGx Yuri Grinshteyn ?Coherence uses WLS tooling, including deployment, and can be part of the WLS cluster. Well done there. #OracleCAF Maciej Gruszka ?#Coherence 12.1.2 auto updates data grid on changes inside DB thru #GoldenGate HotCache - another cool feature of #OracleCAF Oracle WebLogic ?From #OracleCAF launch: Tight integration tween WLS, #Coherence and #OracleDB. Dynamic clusters, OSS support & more http://pub.vitrue.com/3NL9 OTNArchBeat ?25 recent no-fluff technical articles on Oracle WebLogic #OracleCAF http://pub.vitrue.com/FEG5 Maciej Gruszka ?@dave_cabelus Elastic JMS is my favourite capability of #WebLogic 12.1.2 WebLogic Community ?Dynamic WebLogic Clustering COOL - what is Wour favorite 12.1.2 feature? #OracleCAF #WebLogicCommunity pic.twitter.com/T8lvDMJ1U0 WebLogic Community ?What is the coolest #WebLogic 12.1.2 feature? Let us know @wlscommunity http://weblogiccommunity.com/2013/07/30/launch-webcast-weblogic-coherence-jdeveloper-adf-12-1-2-00-july-31st-2013/ … #WebLogicCommunity Simon Haslam ?I'm speaking(!) on the panel session with @frankmunz & Matt Rosen on the CAF/WebLogic 12.1.2 launch: 6pm UK today https://event.on24.com/eventRegistration/EventLobbyServlet?target=registration.jsp&eventid=651242&partnerref=CAF_Launch_OCOM_07312013&sourcepage=register … Markus Eisele ?#WebLogic 12.1.2 - an Important New Release for Middleware Admins http://bit.ly/1cmtqhX by @simon_haslam OracleEnterpriseMgr ?The JVM diagnostics features of #EM12c are now shown in a demo by @hawkinsg1 at the #OracleCAF launch http://bit.ly/caflaunch Shaun Smith ?Curious about the new #Coherence 12.1.2 GoldenGate HotCache feature? I explain all on youtube: http://www.youtube.com/watch?v=O0TIG3hgbg0&feature=share&list=PLxqhEJ4CA3JtQwuPS8Qmd88lGX-gsIbHV … #OracleCAF Maciej Gruszka ?Try for Yourself -- Download the products Oracle WebLogic 12.1.2: http://www.oracle.com/technetwork/middleware/fusion-middleware/downloads/index.html … Oracle Coherence 12c: http://www.oracle.com/technetwork/middleware/coherence/downloads/index.htm … WebLogic Community ?What is Your favorite feature in #WebLogic 12.1.2 ? cool stuff! #OracleCAF #WebLogicCommunity http://WeblogicCommunity.com pic.twitter.com/xjR05tiaQj We encourage you to learn more about all the products by reviewing the following resources: Try for Yourself -- Download the products Oracle WebLogic 12.1.2 Oracle Coherence 12c Enterprise Manager Developer Tools WebLogic Community blog Learn more Read the Oracle WebLogic Business Whitepaper Read the Oracle Coherence Business Whitepaper Read the Oracle WebLogic and Oracle Database Integration Whitepaper Get Training from Oracle University Check out the Oracle WebLogic YouTube Channel Check out the Oracle Coherence YouTube Channel WebLogic Partner Community Registration The Webcast is available on-demand Watch Webcast Now WebLogic Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: Weblogic 12.1.2,WebLogic Community,Oracle,OPN,Jürgen Kress

Read the article

SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

- by mseika

Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

Read the article

SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

- by mseika

Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

Read the article

SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

- by mseika

Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

Read the article

SPARC T5-8 Servers EMEA Acceleration Promotion for Partners

- by mseika

Dear all We are pleased to announce the EMEA T5-8 Acceleration Promotion, a price promotion that, for a limited time, makes the T5-8 server available to our EMEA partners at a very attractive discount. Why the SPARC T5-8 server Oracle's SPARC servers running Oracle Solaris are ideal for mission-critical applications requiring high performance, best-in-class availability, and unmatched scalability on all application tiers. SPARC servers include built-in virtualization, systems management, and security at no additional cost. Designed for applications that demand the highest performance and 24x7 availability. Oracle's SPARC T5-8 server is the fastest and the most advanced, scalable midrange server in the Oracle portfolio. The Oracle SPARC T5-8 server is in the sweet spot of the UNIX midrange, and directly competing with IBM P770(+) and P780(+) systems, with a 7x price advantage (see official Oracle press release) over a similarly configured P780 system! What are we offering Effective immediately, the fully-configured T5-8 server is available to VADs with a 38% discount off price list: this is 8 additional points on top of the standard 30% contractual discount. The promo will be communicated to VADs and VARs, and VADs are expected to pass the additional discount through to the VARs. Resellers will be encouraged to use this attractive price to position T5-8 versus the competition, accelerate T5-8 sales, and use the increased margin to offer additional services to their end users - thus expanding their footprint within their customers and making the T5-8 business proposition even more compelling. This is a unique opportunity for partners to expand their base and beat the competition with a 7x price advantage over a similarly configured IBM P780. This price promotion is only available to OPN Partners, and is valid until November 30, 2013. What's in it for Partners More competitive price More customer budget available for more projects: attach migration services, training, ... Opportunity to attach Storage, and additional Software Higher win rate Additional Details The promotion is valid for the existing configurations of T5-8 with 8 CPU and different memory configurations, including all X-options that are part of the system and ordered at the same time. 8% additional discount to the VAD on full T5-8 - Including X-Options: Cat V (30% + 8% additional): System, CPU, Memory, Disks, Ethernet Cat U (22% + 8% additional): Infiniband HCA Cat W (30% + 8% additional): FC/SAS HBA / FCoE CNA Partner eligibilty criteria Standard requirements apply. Partners must: be an OPN member in good standing, at Gold level or above meet the Resale criteria in the SPARC T-Series servers Knowledge Zone have a right to distribute hardware via the Full Use Distribution Agreement, with Hardware Addendum if applicable. Order process The promotion is available until November 30, 2013. VADs place the order via Oracle Partner Store. A request for extra-discount has to be raised in advance using the standard process for available configs: input the configuration apply the suggested discounts submit the request in the request documentation, please refer to EMEA T5-8 FY14H1 Channel Promotion as approved in GDMT GT-EB2-Q413-107C This promotion is only valid for the T5-8 configurations stated in this announcement. Any change, or additional products / items not listed explicitly, can be ordered at the same time and will follow standard approval process. Key contacts Your local A&C organization For questions on EMEA Partner Programs for Servers: Giuseppe Facchetti For questions on the T5-8 product: Martin de Jong Best regards, Olivier Tordo Senior Director, Sales & Strategy, Hardware SolutionsEMEA Alliances & Channels Paul Flannery Senior Director, EMEA Servers Product Management

Read the article

problem with network-manager-pptp

- by Riuzaki90

I've a problema with the VPA CAble connection of my university... on the website of the university there's a .sh file that set all the variables of the connection in ETC/PPP/PEERS and another .sh file that call the connection...I'm on ubuntu 11.10 and when I run the setup.sh I have this error: impossible to find network-manager-pptp these are the two file that I had talk about: #!/bin/bash echo "Creazione della connessione in corso attendere........." apt-get update apt-get install pptp-linux network-manager-pptp echo -n "Digitare la propria Username: " read USERNAME echo -n "Digitare la propria Password: " read PASSWORD pptpsetup --create UNICAL_Campus_Access --server 160.97.73.253 --username $USERNAME --password $PASSWORD echo 'pty "pptp 160.97.73.253 --nolaunchpppd"' >/etc/ppp/peers/UNICAL_Campus_Access echo 'require-mppe-128' >>/etc/ppp/peers/UNICAL_Campus_Access echo 'file /etc/ppp/options.pptp'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'name '$USERNAME''>>/etc/ppp/peers/UNICAL_Campus_Access echo 'remotename PPTP'>>/etc/ppp/peers/UNICAL_Campus_Access echo 'ipparam UNICAL_Campus_Access'>>/etc/ppp/peers/UNICAL_Campus_Access echo $USERNAME' PPTP '$PASSWORD' *'>>/etc/ppp/chap-secrets rm /etc/ppp/options.pptp echo '###############################################################################'>/etc/ppp/options.pptp echo '# $Id: options.pptp,v 1.3 2006/03/26 23:11:05 quozl Exp $'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# Sample PPTP PPP options file /etc/ppp/options.pptp'>>/etc/ppp/options.pptp echo '# Options used by PPP when a connection is made by a PPTP client.'>>/etc/ppp/options.pptp echo '# This file can be referred to by an /etc/ppp/peers file for the tunnel.'>>/etc/ppp/options.pptp echo '# Changes are effective on the next connection. See "man pppd".'>>/etc/ppp/options.pptp echo '#'>>/etc/ppp/options.pptp echo '# You are expected to change this file to suit your system. As'>>/etc/ppp/options.pptp echo '# packaged, it requires PPP 2.4.2 or later from http://ppp.samba.org/'>>/etc/ppp/options.pptp echo '# and the kernel MPPE module available from the CVS repository also on'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/, which is packaged for DKMS as kernel_ppp_mppe.'>>/etc/ppp/options.pptp echo '###############################################################################'>>/etc/ppp/options.pptp echo '# Lock the port'>>/etc/ppp/options.pptp echo 'lock'>>/etc/ppp/options.pptp echo '# Authentication'>>/etc/ppp/options.pptp echo '# We do not need the tunnel server to authenticate itself'>>/etc/ppp/options.pptp echo 'noauth'>>/etc/ppp/options.pptp echo '#We won"t do PAP, EAP, CHAP, or MSCHAP, but we will accept MSCHAP-V2'>>/etc/ppp/options.pptp echo '#(you may need to remove these refusals if the server is not using MPPE)'>>/etc/ppp/options.pptp echo 'refuse-pap'>>/etc/ppp/options.pptp echo 'refuse-eap'>>/etc/ppp/options.pptp echo 'refuse-chap'>>/etc/ppp/options.pptp echo 'refuse-mschap'>>/etc/ppp/options.pptp echo '# Compression Turn off compression protocols we know won"t be used'>>/etc/ppp/options.pptp echo 'nobsdcomp'>>/etc/ppp/options.pptp echo 'nodeflate'>>/etc/ppp/options.pptp echo '# Encryption'>>/etc/ppp/options.pptp echo '# (There have been multiple versions of PPP with encryption support,'>>/etc/ppp/options.pptp echo '# choose with of the following sections you will use. Note that MPPE'>>/etc/ppp/options.pptp echo '# requires the use of MSCHAP-V2 during authentication)'>>/etc/ppp/options.pptp echo '# http://ppp.samba.org/ the PPP project version of PPP by Paul Mackarras'>>/etc/ppp/options.pptp echo '# ppp-2.4.2 or later with MPPE only, kernel module ppp_mppe.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#require-mppe-128'>>/etc/ppp/options.pptp echo '#}}}'>>/etc/ppp/options.pptp echo '# http://polbox.com/h/hs001/ fork from PPP project by Jan Dubiec'>>/etc/ppp/options.pptp echo '#ppp-2.4.2 or later with MPPE and MPPC, kernel module ppp_mppe_mppc.o'>>/etc/ppp/options.pptp echo '#{{{'>>/etc/ppp/options.pptp echo '# Require MPPE 128-bit encryption'>>/etc/ppp/options.pptp echo '#mppe required,stateless'>>/etc/ppp/options.pptp echo '# }}}'>>/etc/ppp/options.pptp echo "setup di 'UNICAL Campus Access' terminato correttamente" echo "per connettersi eseguire lo script 'UNICAL_Campus_Access.sh' " and the second: #!/bin/bash echo "Connessione alla Rete del Centro Residenziale in corso attendere........." modprobe ppp_mppe pppd call UNICAL_Campus_Access sleep 30 tail -n 8 /var/log/messages echo "Connessione Stabilita" echo -n "Per terminare la connessione premere invio (in alternativa eseguire il commando 'killall pppd'):----> " read CONN killall pppd echo "Connessione terminata" I've correctly installed network-manager-pptp to the latest version...help?

Read the article

Parner Webcast - Innovations in Products Program

- by Richard Lefebvre

We are pleased to invite you to join the Innovations in Products –webcast. Innovations in Products will present Oracle Applications' Product's new functions and features including sales positioning. The key objectives of these webcasts are to inspire System Integrator's implementation personnel to conduct successful after sales in their Customer projects. Innovations in Products will be presented on the 1st Monday of each quarter after the billable day (4:00 to 5:00 PM CET). The webcast is intended for System Integrator's Implementation Certified Specialists but Innovations in Products is open for other interested Oracle Applications system Integrator's personnel as well. At first, two Oracle representatives will discuss Oracle's contribution to Partners. Then you will see product breakout session followed by Q&A with Oracle Experts. Each session will last for maximum 1 hour. A Q&A document covering all questions and answers will be made available after the webcast. What are the Benefits for partners? Find out how Innovations in Products helps you to improve your after sales Discover new functions and features so you can enrich your Customers's solution Learn more about Oracle Applications products, especially sales positioning Hear crucial questions raised by colleague alike, learn from their interest Engage and present your questions to subject experts Be inspired of the richness of Oracle Application portfolio – for your and your customer’s benefit Note: Should you already be familiar with a specific Product, then choose another one. Doing so you would expand your knowledge of the overall Applications portfolio. Some presentations contain product demonstration, although these presentations are not intended to be extremely detailed technical presentations. Note: At the latter part of this email you have also 17 links into the recent Applications Products presentations and 6 links into the Public Sector Value Proposition presentations that were presented in Innovations in Industries -program. Product breakout sessions: Topics Speaker To Register Fusion Applications Technology and Extensibility: A next-generation platform that adapts to client needs. Matthew Johnson, Sr. Director, SCM Product Development, EMEA CLICK HERE Fusion Applications - Transforming your Back-Office Accounting Function: Changing how people work in back office functions to drive value add Liam Nolan, Director, ERP Product Development, EMEA CLICK HERE Fusion HCM & Talent Overview & Extensibility: A more in-depth look into a personalized HCM solution Synco Jonkeren, Vice-President HCM Product Development & Management, EMEA CLICK HERE Fusion HCM Compensation Planning: Compensate To Compete Rosie Warner, Director, HCM Sales Development CLICK HERE Enterprise PLM for the Product Value Chain: Oracle Enterprise PLM offers Industry specific solutions that cover the Product Value Chain Ulf Köster, Sales Development Leader Enterprise PLM, Oracle Western Europe CLICK HERE Oracle's Asset Management and Maintenance Solution: What you need to know to successfully implement Oracle Asset Management solutions within Oracle Installed Base Philip Carey, Asset Management and Maintenance Solution Specialist CLICK HERE For more details please visit Innovations in Products and other breakout sessions on OPN page. Delivery Format Innovations in Products –program is a series of FREE prerecorded Applications product presentations followed by Q&A. It will be delivered over the Web. Participants have the opportunity to submit questions during the web cast via chat and subject matter experts will provide verbal answers live. Innovations in Products consists of several parallel prerecorded product breakout sessions, each lasting for max. 1 hour. At first, two Oracle representatives will discuss Oracle’s contribution to Partners. Then you’ll see the product breakout sessions followed by Q&A with Oracle Experts. A Q&A document covering all questions and answers will be made available after the webcast. You can also see Innovations in Products afterwards as its content will be available online for the next 6-12 months. The next Innovations in Products web casts will be presented as follows: July 2nd 2012 October 1st 2012 January 14th 2013 April 8th 2013. Note: Depending on local network bandwidth please allow some seconds time the presentations to download. You might want to refresh your screen by pressing F5. Duration Maximum 1 hour For further information please contact me Markku Rouhiainen. Recent Innovations in Products presentations Applications Products presented on April the 2nd, 2012 Speaker To Register Fusion CRM: Effective, Efficient and Easy James Penfold , Senior Director, Applications Product Development and Product Management CLICK HERE Fusion HCM: Talent management overview performance, goals, talent review Jaime Losantos Viñolas, Director, HCM Sales Development CLICK HERE Distributed Order Management - Fusion SCM Solution Vikram K Singla, Business Development Director, Supply Chain Management Applications, UK CLICK HERE Oracle Transportation Management Dominic Regan, Senior Director Oracle Transportation Management EMEA CLICK HERE Oracle Value Chain Planning: Demantra Sales & Operation Planning and Demantra Demand Management Lionel Albert, Senior Director Value Chain Planning, EMEA CLICK HERE Oracle CX (Customer Experience) - formerly CEM: Powering Great Customer Experiences Maria Ramirez , CRM Presales Consultant, EPC CLICK HERE EPM 11.1.2.2 Overview Nicholas Cox , EMEA Sales Development Director - Enterprise Performance Management CLICK HERE Oracle Hyperion Profitability and Cost Management, 11.1.2.1 Daniela Lazar , Senior EPM Sales Consultant, EPC CLICK HERE January the 16th 2012 Speaker To Register CRM / ATG: Best-in-Class CRM & Commerce Maria Ramirez , Associate CRM Presales Consultant, EPC CLICK HERE CRM / Automate Business Rules for Maximum Efficiency with OPA (Oracle Policy Automation) Marco Nilo, Associate CRM Presales Consultant, EPC CLICK HERE CRM / InQuira Toby Baker, Principal Sales Consultant, CRM Product Specialist Team CLICK HERE EPM / Business Intelligence Foundation Suite – Sales and Product Updates Liviu Nitescu, Senior BI Sales Consultant, EPC CLICK HERE EPM / Hyperion Planning 11.1.2.1 - Sales & Product Updates Andreea Voinea, EPM Sales Consultant, EPC CLICK HERE ERP / JDE EnterpriseOne Fulfillment Management Overview Mirela Andreea Nasta , ERP Presales Consultant, EPC CLICK HERE ERP / Spotlights on iExpenses Elena Nita ,ERP Presales Consultant, EPC CLICK HERE MDM / Master Data Management Martin Boyd , Senior Director Product Strategy CLICK HERE Product break through session Fusion Applications Human Capital Management Rosie Warner , Director, HCM Sales Development CLICK HERE Recent Innovations in Industries Value Proposition presentations January the 16th 2012 Speaker To Register Process Modernisation Iemke Idsingh Public Sector Solutions Director CLICK HERE Shared Services Ann Smith Business Development Director, Shared Services CLICK HERE Strengthening Financial Discipline Whilst Delivering Cashable Savings Philippa Headley UK Sales Development Director Public Sector - EPM Solutions CLICK HERE Social Welfare Industry Solutions Christian Wernberg-Tougaard Industry Director - Social Welfare CLICK HERE Police Industry Solutions Jeff Penrose Solution Sales Director CLICK HERE Tax and Revenue Management Industry Solutions Andre van der Post Global Director - Tax Solutions and Strategy CLICK HERE

Read the article

Subscribable World Cup 2010 Calendar

- by jamiet

I bang on quite a lot on this blog about ways in which data can get published over the web and one of the most interesting ways, in my opinion, of publishing data in a structured manner that is well understood is to use the iCalendar specification. There isn’t much information in the world that doesn’t have some concept of “when” so iCalendar is a great way of distributing that information. You have probably used iCalendar at some point without even knowing about it. All files with a .ics suffix are iCalendar format files and that is why you can happily import them into Outlook, Hotmail Calendar, Google Calendar etc… where they can be parsed and have the semantic data (when, where and who) extracted from them. Importing of iCalendar format data is really only half the trick though; in my opinion the real value of iCalendar-formatted calendar is the ability to subscribe to them. Subscribing has a simple benefit over importing but that single benefit is of massive importance: a subscriber to an iCalendar calendar can periodically check to see if any updates have been made and, if they have, automatically update the local copy. The real benefit to the user is the productivity gain – a single update to an iCalendar means that all subscribers are automatically made aware of the change and there is zero effort on the part of the subscriber; as my former colleague Howard van Rooijen is fond of saying, “work smarter not harder” – nowhere is this edict more ably demonstrated than subscribing versus importing of calendars. If you want to read some more thoughts about iCalendar then go and read my past blog post Calendar syndication - My big hope for 2009's breakthrough technology or better still go and seek out Jon Udell who speaks very authoritatively on the issue of iCalendar. With this subject of iCalendar on my mind I was interested to discover (via Steve Clayton’s blog post Download the world cup fixtures) that the BBC had made a .ics file available containing all of the matches in the upcoming World Cup. As you can probably guess this was a file that was made available so that it could be imported into your calendar of choice. It had one obvious downside though, right now nobody knows who is going to be playing in the knock-out stages so the calendar looks like this: with no teams being named after 25th June. How much more useful would this calendar have been if the BBC had made it possible to subscribe to the calendar instead, thus the calendar could be updated with the teams for the knock out stages when they are known and every subscriber would have a permanently up-to-date record of all the fixtures in their calendar. Better still, the calendar could be updated with match results as well or perhaps even post a match report from the BBC sport pages; when calendars are made subscribable a sea of opportunity opens up for distribution of information. So with that in mind I have decided to go one better than the BBC. I have imported their .ics into a brand new Hotmail calendar and made it publicly available at the following URLs: HTML http://cid-dc1ed121af0476be.calendar.live.com/calendar/World+Cup+2010/index.html iCalendar webcal://cid-dc1ed121af0476be.calendar.live.com/calendar/World+Cup+2010/calendar.ics The link you’re really interested in is the second one - click on that and it should open up in your calendar software of choice. Or, if you want to view it in an online calendar such as Hotmail Calendar or Google Calendar, copy and paste that URL into the appropriate place. Some people have told me they’re having trouble with the iCalendar link in which case hit the HTML link and then click “View ICS” at the resultant web page: I shall endeavour to keep the calendar updated throughout the World Cup and even if I don’t you’re no worse off than if you had imported the BBC’s .ics file so why not give it a try? If I do keep it up to date then you will have a permanent record of the 2010 World Cup available in your calendar. Forever. If you have your calendar synced to your smartphone then you’ll be carrying match reports around with you without you having to do a single thing. Surely that’s worth a quick click isn’t it? If you have any thoughts let me have them in the comments below. Thanks for reading. @Jamiet Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

Read the article

Developer Profile: Marcelo Quinta

- by Tori Wieldt

As the Java developer community lead for Oracle, the best part of my job is going to conferences and meeting Java developers. I’ve had the pleasure to meet men and women who are smart, fun and passionate about Java—they make the Java community happen. The current issue of Java Magazine provides profiles of other young Java developers around the world. Subscribe to read them! Marcelo Quinta Age: 24Occupation: Professor, Federal University of GoiasLocation: Goias, Brazil Twitter: @mrquinta Marcelo (white polo shirt, center) and class OTN: When did you realize that you were good at programming? When I was in graduate school, I developed a Java system that displayed worked out the logics of getting the maximum coverage using the fewest resources (for example, the minimum number of soldiers [and positions] needed for a battlefield. It may seems not difficult, but it's a hard problem to solve, mathematically. Here I was, a freshman, who came up with an app "solving" it. Some Master's students use my software today. It was then I began to believe in what I could do.OTN: What most inspires you about programming?I'm really inspired by the challenges and tension that comes from solving a complicated problems. Lately, I've been doing a new system focused on education and digital inclusion and was very gratifying to see it working and the results. I felt useful for the community. OTN: What are some things you would like to accomplish using Java?Java is a very strong platform and that gives us power to develop applications for different devices and purposes, from home automation with little microcontrollers to systems in big servers. I would like to build more systems that integrate the people life or different business contexts, from PCs to cell phones and tablets, ubiquitously. I think IT has reached a level where the current challenge is to make systems that leverage existing technologies that are present in daily life. Java gives us a very interesting set of options to put it into practice, especially in systems that require more strength.OTN: What technical insights into Java technology have been most important to you?I have really enjoyed the way that Java has evolved with Oracle, with new features added, many of them which were suggested by the community. Java 7 came with substantial improvements in the language syntax and it seems that Java 8 takes it even further. I also made some applications in JavaFX and liked the new version. The Java GUI is on a higher level than is offered out there. I saw some JavaFX prototypes running in modern tablets and I got excited. OTN: What would you like to be doing 10 years from now?I want my work to make a difference for individuals or an institution. It would be interesting to be improving one of the systems that I am making today. Recently I've been mixing my hobbies and work, playing with Arduino and home automation. The JHome project, winner of the Duke's Choice Award in 2011, is very interesting to me.OTN: Do you listen to music when you write code? If so, what kind?Absolutely! I usually listen to electronic music (Prodigy, Fatboy Slim and Paul Oakenfold), rock (Metallica, Strokes, The Black Keys) and a bit of local alternative music. I live in Goiânia, "The Brazilian Seattle" and I profit from it very well. OTN: What do you do when you're not programming?I like to play guitar and to fish. Last year I sold my economy car and bought a old jeep. Some people called me crazy, but since then I've been having a great time and having adventures on the backroads of Brazil. Once I broke my glasses in a funny game involving my car's suspension and the airbags. OTN: Does your girlfriend think you are crazy?Crazy is someone who doesn't have courage to do strange things! My girlfriend likes my style. =D Subscribe to the free Java Magazine to read profiles of other young Java developers. Visit the Java channel on YouTube to see a video of Marcelo in action.

Read the article

Tip on Reusing Classes in Different .NET Project Types

- by psheriff

All of us have class libraries that we developed for use in our projects. When you create a .NET Class Library project with many classes, you can use that DLL in ASP.NET, Windows Forms and WPF applications. However, for Silverlight and Windows Phone, these .NET Class Libraries cannot be used. The reason is Silverlight and Windows Phone both use a scaled down version of .NET and thus do not have access to the full .NET framework class library. However, there are many classes and functionality that will work in the full .NET and in the scaled down versions that Silverlight and Windows Phone use.Let’s take an example of a class that you might want to use in all of the above mentioned projects. The code listing shown below might be something that you have in a Windows Form or an ASP.NET application. public class StringCommon{ public static bool IsAllLowerCase(string value) { return new Regex(@"^([^A-Z])+$").IsMatch(value); } public static bool IsAllUpperCase(string value) { return new Regex(@"^([^a-z])+$").IsMatch(value); }} The StringCommon class is very simple with just two methods, but you know that the System.Text.RegularExpressions namespace is available in Silverlight and Windows Phone. Thus, you know that you may reuse this class in your Silverlight and Windows Phone projects. Here is the problem: if you create a Silverlight Class Library project and you right-click on that project in Solution Explorer and choose Add | Add Existing Item… from the menu, the class file StringCommon.cs will be copied from the original location and placed into the Silverlight Class Library project. You now have two files with the same code. If you want to change the code you will now need to change it in two places! This is a maintenance nightmare that you have just created. If you then add this to a Windows Phone Class Library project, you now have three places you need to modify the code! Add As LinkInstead of creating three separate copies of the same class file, you want to leave the original class file in its original location and just create a link to that file from the Silverlight and Windows Phone class libraries. Visual Studio will allow you to do this, but you need to do one additional step in the Add Existing Item dialog (see Figure 1). You will still right mouse click on the project and choose Add | Add Existing Item… from the menu. You will still highlight the file you want to add to your project, but DO NOT click on the Add button. Instead click on the drop down portion of the Add button and choose the “Add As Link” menu item. This will now create a link to the file on disk and will not copy the file into your new project. Figure 1: Add as Link will create a link, not copy the file over. When this linked file is added to your project, there will be a different icon next to that file in the Solution Explorer window. This icon signifies that this is a link to a file in another folder on your hard drive. Figure 2: The Linked file will have a different icon to show it is a link. Of course, if you have code that will not work in Silverlight or Windows Phone -- because the code has dependencies on features of .NET that are not supported on those platforms – you can always wrap conditional compilation code around the offending code so it will be removed when compiled in those class libraries. SummaryIn this short blog entry you learned how to reuse one of your class libraries from ASP.NET, Windows Forms or WPF applications in your Silverlight or Windows Phone class libraries. You can do this without creating a maintenance nightmare by using the “Add a Link” feature of the Add Existing Item dialog. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.

Read the article

Copy New Files Only in .NET

- by psheriff

Recently I had a client that had a need to copy files from one folder to another. However, there was a process that was running that would dump new files into the original folder every minute or so. So, we needed to be able to copy over all the files one time, then also be able to go back a little later and grab just the new files. After looking into the System.IO namespace, none of the classes within here met my needs exactly. Of course I could build it out of the various File and Directory classes, but then I remembered back to my old DOS days (yes, I am that old!). The XCopy command in DOS (or the command prompt for you pure Windows people) is very powerful. One of the options you can pass to this command is to grab only newer files when copying from one folder to another. So instead of writing a ton of code I decided to simply call the XCopy command using the Process class in .NET. The command I needed to run at the command prompt looked like this: XCopy C:\Original\*.* D:\Backup\*.* /q /d /y What this command does is to copy all files from the Original folder on the C drive to the Backup folder on the D drive. The /q option says to do it quitely without repeating all the file names as it copies them. The /d option says to get any newer files it finds in the Original folder that are not in the Backup folder, or any files that have a newer date/time stamp. The /y option will automatically overwrite any existing files without prompting the user to press the "Y" key to overwrite the file. To translate this into code that we can call from our .NET programs, you can write the CopyFiles method presented below. C# using System.Diagnostics public void CopyFiles(string source, string destination){ ProcessStartInfo si = new ProcessStartInfo(); string args = @"{0}\*.* {1}\*.* /q /d /y"; args = string.Format(args, source, destination); si.FileName = "xcopy"; si.Arguments = args; Process.Start(si);} VB.NET Imports System.Diagnostics Public Sub CopyFiles(source As String, destination As String) Dim si As New ProcessStartInfo() Dim args As String = "{0}\*.* {1}\*.* /q /d /y" args = String.Format(args, source, destination) si.FileName = "xcopy" si.Arguments = args Process.Start(si)End Sub The CopyFiles method first creates a ProcessStartInfo object. This object is where you fill in name of the command you wish to run and also the arguments that you wish to pass to the command. I created a string with the arguments then filled in the source and destination folders using the string.Format() method. Finally you call the Start method of the Process class passing in the ProcessStartInfo object. That's all there is to calling any command in the operating system. Very simple, and much less code than it would have taken had I coded it using the various File and Directory classes. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.

Read the article

SQL Sentry Truth-Telling and Disk Configuration

- by AjarnMark

Recently, SQL Sentry told me something about my SQL Server disk configurations that I just didn’t want to believe, but alas, it was true. Several days ago I posted my First Impressions of the SQL Sentry Power Suite. Today’s post could fall into the category of, “Hey, as long as you have that fancy tool…” Unfortunately, it also falls into the category of an overloaded worker taking someone else’s word for the truth, not verifying it with independent fact-checking, and then making decisions based on that. Here’s my story… I’m not exactly an Accidental DBA (or Involuntary DBA as Paul Randal calls it). I came to this company five years ago as a lead application developer with extensive experience in database design and development. I worked my way into management, and along the way, took over the DBA responsibilities. Fortunately, our systems run pretty smoothly most of the time, but I’m always looking for ways to make them better and to fit into my understanding of best practices. When I took over as DBA, I inherited a SQL 2000 server with about 30 databases on it supporting our main systems, and a SQL 2005 server with multiple instances. Both of these servers were configured with the Operating System and Application files on the C drive, data files on a different drive letter, and log files on a third drive letter. Even before I took over as DBA, I verified that this was true with a previous server administrator, and that these represented actual separate disks. He stated that they did, and I thought that all was well. Then one day, I’m poking around inside the SQL Sentry Performance Advisor, checking out features as I am evaluating whether to purchase the product, and I come across a Disk Configuration section. The first thing I notice is that the drives do not have the proper partition offset, which was not at all surprising to me given the age of the installation and the relative newness of that topic. But what threw me for a loop was that the graphic display appeared to be telling me that I did not in fact have three separate drives (or arrays) but rather had two, and that the log files were merely on a separate volume on the same physical array as the OS. I figured that I must be reading it wrong so I scanned the Help file, but that just seemed to confirm my interpretation. Then I thought, “there must be something wrong with the demo version of the software! This can’t be right!” But just to double-check, I went to our current server admin to talk it over with him, and sure enough, SQL Sentry was telling the truth! I was stunned! I quickly went through the grieving process…denial…anger…reconciliation. Here was something that I thought was such a basic truth that was turned upside down. OK, granted, this wasn’t disastrous. Our databases didn’t suddenly grind to a halt. I didn’t get calls late at night inquiring about the sudden downturn in performance. But it was a bit of a shock to the system, in a good way, to jolt me out of taking what I had believed as the truth for granted, and instead to Trust, but Verify! Yes, before someone else points it out, I know that there are”free” disk management tools built-in to Windows that would have told me the same thing if I had only looked at them; I did not have to buy a fancy tool to tell me that, but the fact is, until I was evaluating the tool, I had just gone with what I was told, and never bothered to check what was actually there. So, what things do you believe to be true but you actually never verified?

Read the article

Be the surgeon

- by Rob Farley

It’s a phrase I use often, especially when teaching, and I wish I had realised the concept years earlier. (And of course, fits with this month’s T-SQL Tuesday topic, hosted by Argenis Fernandez) When I’m sick enough to go to the doctor, I see a GP. I used to typically see the same guy, but he’s moved on now. However, when he has been able to roughly identify the area of the problem, I get referred to a specialist, sometimes a surgeon. Being a surgeon requires a refined set of skills. It’s why they often don’t like to be called “Doctor”, and prefer the traditional “Mister” (the history is that the doctor used to make the diagnosis, and then hand the patient over to the person who didn’t have a doctorate, but rather was an expert cutter, typically from a background in butchering). But if you ask the surgeon about the pain you have in your leg sometimes, you’ll get told to ask your GP. It’s not that your surgeon isn’t interested – they just don’t know the answer. IT is the same now. That wasn’t something that I really understood when I got out of university. I knew there was a lot to know about IT – I’d just done an honours degree in it. But I also knew that I’d done well in just about all my subjects, and felt like I had a handle on everything. I got into developing, and still felt that having a good level of understanding about every aspect of IT was a good thing. This got me through for the first six or seven years of my career. But then I started to realise that I couldn’t compete. I’d moved into management, and was spending my days running projects, rather than writing code. The kids were getting older. I’d had a bad back injury (ask anyone with chronic pain how it affects your ability to concentrate, retain information, etc). But most of all, IT was getting larger. I knew kids without lives who knew more than I did. And I felt like I could easily identify people who were better than me in whatever area I could think of. Except writing queries (this was before I discovered technical communities, and people like Paul White and Dave Ballantyne). And so I figured I’d specialise. I wish I’d done it years earlier. Now, I can tell you plenty of people who are better than me at any area you can pick. But there are also more people who might consider listing me in some of their lists too. If I’d stayed the GP, I’d be stuck in management, and finding that there were better managers than me too. If you’re reading this, SQL could well be your thing. But it might not be either. Your thing might not even be in IT. Find out, and then see if you can be a world-beater at it. But it gets even better, because you can find other people to complement the things that you’re not so good at. My company, LobsterPot Solutions, has six people in it at the moment. I’ve hand-picked those six people, along with the one who quit. The great thing about it is that I’ve been able to pick people who don’t necessarily specialise in the same way as me. I don’t write their T-SQL for them – generally they’re good enough at that themselves. But I’m on-hand if needed. Consider Roger Noble, for example. He’s doing stuff in HTML5 and jQuery that I could never dream of doing to create an amazing HTML5 version of PivotViewer. Or Ashley Sewell, a guy who does project management far better than I do. I could go on. My team is brilliant, and I love them to bits. We’re all surgeons, and when we work together, I like to think we’re pretty good! @rob_farley

Read the article

Walmart and Fusion Apps

- by ultan o'broin

Photograph: Misha Vaughan I attended Fusion Apps (yes, I know I am supposed to say "Oracle Fusion Applications", but stuffy old style guides are a turn-off in interwebs conversations) User Experience Advocate (FXA) training in Long Beach, California last week; a suitable location as ODTUG KSCOPE 11 was kicking off and key players were in the area. As a member of Oracle's Apps-UX team I know the Fusion Apps messaging, natch, and done some other Fusion Apps go-to-market content work too. For the messaging details themselves, see Lonneke Dikmans (@lonnekedikmans) great blog, by the way. However, I wanted some 'formal' training combined with the opportunity to meet and learn from people already out there delivering those messages. The idea in me reaching out to Misha Vaughan, Apps-UX FXA maven, to get me onto this training was that in addition to my UX knowledge, I could leverage my location in EMEA and hit up customer events more quickly and easily. Those local user groups do like to hear the voice of locals too you know (so I need to work on that mid-Atlantic accent). I'm looking forward to such opportunities. The training was all smashing stuff, just the right level of detail, delivered professionally and with great style and humor. I was especially honored to be paired off for my er, coaching with Debra Lilley (@debralilley), who shared with everyone all kinds of tips and insights from her experiences of delivering the message and demo. For me, that was the real power of the FXA event--the communal, conversational aspect--the meeting up with people who had done all this for real, the sharing in their experiences, while learning along with other newbies. Sorry, but that all-important social aspect doesn't work so well with remote meetings. Katie Candland (Apps-UX) gave us a great tour of the Fusion Apps demo and included some useful presentational tips too (any excuse to buy that iPad). It's clear to me that the Fusion Apps messaging and demos really come alive with real-world examples that local application users will recognize, and I picked up some "yes, that's my job made easier" scene-stealers from Debra and Karen Brownfield too, to add to the great ones already provided. This power of examples shouldn't surprise anyone, they've long been a mainstay of applications user assistance, popular with users. We'll offer customers different types of example topics in the Fusion Apps online help too (stay tuned), and we know from research how important those 3S's (stories, scenarios, and simulations) are to users when they consume and apply information. Well, we've got the simulation, now it's time for more stories and scenarios. If you get a chance to participate in an FXA event (whether you are an Oracle employee or otherwise), I'd encourage it. It's committing your time and energy for sure, but I got real bang for the buck from it for my everyday job too. Listening to the room's feedback on the application demo really brought our internal design work to life, and I picked up on some things that I need to follow up on (like how you alphabetically sort stuff in other languages). User experience is after all, about users. What will I be doing next, and what would I like to see happen? Obviously, I need to develop my story-telling links with the people I met in Long Beach and do some practicing with the materials, and then get out there and deliver them at a suitable location. The demo is what it is right now, and that's a super-rich demo that I know everyone will want to see and ask questions about. Then, as mentioned by attendees at the FXA event, follow up on those translated and localized messages for EMEA (and APAC), that deal with different statutory or reporting requirements of the target markets. Given my background I would say that, wouldn't I? However, language is part of the UX, and international revenue is greater than US-only revenue for Oracle, so yes dear, we all need to get over the fact that enterprise apps users don't all speak, or want to speak, American-English. Most importantly perhaps, the continued development of a strong messaging community between Oracle and partners and customers where we can swap and share those FXA messaging stories and scenarios about Fusion Apps in a conversational way. The more the better, a combination of online and face-to-face meetings. I must also mention the great dinner after the event at Parker's Lighthouse, and the fun myself and Andrew Gilmour (Apps-UX) had at our end of the table talking about just about everything except Fusion Apps with Ronald Van Luttikhuizen and Ben Prusinski (who now understands the difference between Cork and Dublin people. I hope). Thanks to all the Apps-UXers who helped bring the FXA training to town, and to Debra and all the others that I am too jetlagged to mention right who were instrumental in making it happen for me. Here's to the next one. And the Walmart angle? That was me doing my Robert Scoble (ScO'bilizer?)-style guerilla smart phone research in Walmart in Long Beach, before the FXA event. It's all about stories for me. You can read more about it on the appslab blog (see the comments).

Read the article

Data Security Through Structure, Procedures, Policies, and Governance

Security Structure and Procedures One of the easiest ways to implement security is through the use of structure, in particular the structure in which data is stored. The preferred method for this through the use of User Roles, these Roles allow for specific access to be granted based on what role a user plays in relation to the data that they are manipulating. Typical data access actions are defined by the CRUD Principle. CRUD Principle: Create New Data Read Existing Data Update Existing Data Delete Existing Data Based on the actions assigned to a role assigned, User can manipulate data as they need to preform daily business operations. An example of this can be seen in a hospital where doctors have been assigned Create, Read, Update, and Delete access to their patient’s prescriptions so that a doctor can prescribe and adjust any existing prescriptions as necessary. However, a nurse will only have Read access on the patient’s prescriptions so that they will know what medicines to give to the patients. If you notice, they do not have access to prescribe new prescriptions, update or delete existing prescriptions because only the patient’s doctor has access to preform those actions. With User Roles comes responsibility, companies need to constantly monitor data access to ensure that the proper roles have the most appropriate access levels to ensure users are not exposed to inappropriate data. In addition this also protects rouge employees from gaining access to critical business information that could be destroyed, altered or stolen. It is important that all data access is monitored because of this threat. Security Governance Current Data Governance laws regarding security Health Insurance Portability and Accountability Act (HIPAA) Sarbanes-Oxley Act Database Breach Notification Act The US Department of Health and Human Services defines HIIPAA as a Privacy Rule. This legislation protects the privacy of individually identifiable health information. Currently, HIPAA sets the national standards for securing electronically protected health records. Additionally, its confidentiality provisions protect identifiable information being used to analyze patient safety events and improve patient safety. In 2002 after the wake of the Enron and World Com Financial scandals Senator Paul Sarbanes and Representative Michael Oxley lead the creation of the Sarbanes-Oxley Act. This act administered by the Securities and Exchange Commission (SEC) dramatically altered corporate financial practices and data governance. In addition, it also set specific deadlines for compliance. The Sarbanes-Oxley is not a set of standard business rules and does not specify how a company should retain its records; In fact, this act outlines which pieces of data are to be stored as well as the storage duration. The Database Breach Notification Act requires companies, in the event of a data breach containing personally identifiable information, to notify all California residents whose information was stored on the compromised system at the time of the event, according to Gregory Manter. He further explains that this act is only California legislation. However, it does affect “any person or business that conducts business in California, and that owns or licenses computerized data that includes personal information,” regardless of where the compromised data is located. This will force any business that maintains at least limited interactions with California residents will find themselves subject to the Act’s provisions. Security Policies All companies must work in accordance with the appropriate city, county, state, and federal laws. One way to ensure that a company is legally compliant is to enforce security policies that adhere to the appropriate legislation in their area or areas that they service. These types of polices need to be mandated by a company’s Security Officer. For smaller companies, these policies need to come from executives, Directors, and Owners.

Read the article

Be the surgeon

- by Rob Farley

It’s a phrase I use often, especially when teaching, and I wish I had realised the concept years earlier. (And of course, fits with this month’s T-SQL Tuesday topic, hosted by Argenis Fernandez) When I’m sick enough to go to the doctor, I see a GP. I used to typically see the same guy, but he’s moved on now. However, when he has been able to roughly identify the area of the problem, I get referred to a specialist, sometimes a surgeon. Being a surgeon requires a refined set of skills. It’s why they often don’t like to be called “Doctor”, and prefer the traditional “Mister” (the history is that the doctor used to make the diagnosis, and then hand the patient over to the person who didn’t have a doctorate, but rather was an expert cutter, typically from a background in butchering). But if you ask the surgeon about the pain you have in your leg sometimes, you’ll get told to ask your GP. It’s not that your surgeon isn’t interested – they just don’t know the answer. IT is the same now. That wasn’t something that I really understood when I got out of university. I knew there was a lot to know about IT – I’d just done an honours degree in it. But I also knew that I’d done well in just about all my subjects, and felt like I had a handle on everything. I got into developing, and still felt that having a good level of understanding about every aspect of IT was a good thing. This got me through for the first six or seven years of my career. But then I started to realise that I couldn’t compete. I’d moved into management, and was spending my days running projects, rather than writing code. The kids were getting older. I’d had a bad back injury (ask anyone with chronic pain how it affects your ability to concentrate, retain information, etc). But most of all, IT was getting larger. I knew kids without lives who knew more than I did. And I felt like I could easily identify people who were better than me in whatever area I could think of. Except writing queries (this was before I discovered technical communities, and people like Paul White and Dave Ballantyne). And so I figured I’d specialise. I wish I’d done it years earlier. Now, I can tell you plenty of people who are better than me at any area you can pick. But there are also more people who might consider listing me in some of their lists too. If I’d stayed the GP, I’d be stuck in management, and finding that there were better managers than me too. If you’re reading this, SQL could well be your thing. But it might not be either. Your thing might not even be in IT. Find out, and then see if you can be a world-beater at it. But it gets even better, because you can find other people to complement the things that you’re not so good at. My company, LobsterPot Solutions, has six people in it at the moment. I’ve hand-picked those six people, along with the one who quit. The great thing about it is that I’ve been able to pick people who don’t necessarily specialise in the same way as me. I don’t write their T-SQL for them – generally they’re good enough at that themselves. But I’m on-hand if needed. Consider Roger Noble, for example. He’s doing stuff in HTML5 and jQuery that I could never dream of doing to create an amazing HTML5 version of PivotViewer. Or Ashley Sewell, a guy who does project management far better than I do. I could go on. My team is brilliant, and I love them to bits. We’re all surgeons, and when we work together, I like to think we’re pretty good! @rob_farley

Read the article

What You Can Learn from the NFL Referee Lockout

- by Christina McKeon

American football is a lot like religion. The fans are devoted followers that take brand loyalty to a whole new level. These fans that worship their teams each week showed that they are powerful customers whose voice has an impact. Yesterday, these fans proved that their opinion could force the hand of a large and powerful institution. With a three-month NFL referee lockout that seemed like it was nowhere close to resolution, the Green Bay Packers and the Seattle Seahawks competed last Monday night. For those of you that might have been out of the news cycle the past few days, Green Bay lost the game due to a controversial call that many experts and analysts agree should have resulted in Green Bay winning the game. Outrage ensued. The NFL had pulled replacement referees from the high school ranks, and these replacements did not have the knowledge and experience to handle high intensity NFL games. Fans protested about their customer experience. Their anger-filled rants were heard in social media, in the headlines of newspapers, on radio, and on national TV. Suddenly, the NFL was moved to reach an agreement with the referees. That agreement was reached late in the night on Wednesday with many believing that the referees had the upper hand forcing the owners into submission. Some might argue that the referees benefited, not the fans. Since the fans wanted qualified and competent referees, I would say the fans did benefit. The referees are scheduled to return to the field this Sunday, so the fans got what they wanted. What can you learn from this negative customer experience? Customers are in control. NFL owners thought they were controlling this situation with the upper hand over referees. The owners figured out they weren’t in control when their fans reacted negatively. Customers can make or break you more now than ever before, which is why it is more important to connect with them, engage them in a personal manner, and create rewarding relationships. Protect your brand. Whether knowingly or unknowingly, the NFL put their brand and each team’s brand at risk with replacement referees. Think about each business decision you make, and how it may impact your brand at different points in time. A decision that results in a gain today could result in a larger loss down the road. Customer experience matters. The NFL likely foresaw declining revenues in ticket sales, merchandising, advertising, and other areas if the lockout continued. While fans primarily spoke with their minds in the days following the Green Bay debacle, their wallets would be the next things to speak. Customer experience directly affects your success and is one of the few areas where you can differentiate your business. What would you do if your brand got such negative attention? Would you be prepared to navigate such stormy waters? Would you be able to prevent such a fiasco? If you don’t have a good answer to these questions, consider joining us October 3-5, 2012 at the Oracle Customer Experience Summit in San Francisco. You’ll have the opportunity to learn even more about customer experience from industry experts such as best-selling author Seth Godin, Paul Hagen and Kerry Bodine from Forrester Research, Inc., George Kembel from the Stanford d.School, Bruce Temkin of The Temkin Group, and Gene Alvarez from Gartner Inc.. There will also be plenty of your peers and customer experience experts available for networking and discussions.

Read the article

When row estimation goes wrong

- by Dave Ballantyne

Whilst working at a client site, I hit upon one of those issues that you are not sure if that this is something entirely new or a bug or a gap in your knowledge. The client had a large query that needed optimizing. The query itself looked pretty good, no udfs, UNION ALL were used rather than UNION, most of the predicates were sargable other than one or two minor ones. There were a few extra joins that could be eradicated and having fixed up the query I then started to dive into the plan. I could see all manor of spills in the hash joins and the sort operations, these are caused when SQL Server has not reserved enough memory and has to write to tempdb. A VERY expensive operation that is generally avoidable. These, however, are a symptom of a bad row estimation somewhere else, and when that bad estimation is combined with other estimation errors, chaos can ensue. Working my way back down the plan, I found the cause, and the more I thought about it the more i came convinced that the optimizer could be making a much more intelligent choice. First step is to reproduce and I was able to simplify the query down a single join between two tables, Product and ProductStatus, from a business point of view, quite fundamental, find the status of particular products to show if ‘active’ ,’inactive’ or whatever. The query itself couldn’t be any simpler The estimated plan looked like this: Ignore the “!” warning which is a missing index, but notice that Products has 27,984 rows and the join outputs 14,000. The actual plan shows how bad that estimation of 14,000 is : So every row in Products has a corresponding row in ProductStatus. This is unsurprising, in fact it is guaranteed, there is a trusted FK relationship between the two columns. There is no way that the actual output of the join can be different from the input. The optimizer is already partly aware of the foreign key meta data, and that can be seen in the simplifiction stage. If we drop the Description column from the query: the join to ProductStatus is optimized out. It serves no purpose to the query, there is no data required from the table and the optimizer knows that the FK will guarantee that a matching row will exist so it has been removed. Surely the same should be applied to the row estimations in the initial example, right ? If you think so, please upvote this connect item. So what are our options in fixing this error ? Simply changing the join to a left join will cause the optimizer to think that we could allow the rows not to exist. or a subselect would also work However, this is a client site, Im not able to change each and every query where this join takes place but there is a more global switch that will fix this error, TraceFlag 2301. This is described as, perhaps loosely, “Enable advanced decision support optimizations”. We can test this on the original query in isolation by using the “QueryTraceOn” option and lo and behold our estimated plan now has the ‘correct’ estimation. Many thanks goes to Paul White (b|t) for his help and keeping me sane through this

Search Results

Search found 2499 results on 100 pages for 'paul van valkenburgh'.

Page 96/100 | < Previous Page | 92 93 94 95 96 97 98 99 100 | Next Page >

- by pinaldave

- by psheriff

- by Elena Zannoni

- by Denise McInerney

- by Brian Schroer

- by Tony Davis

- by Brian Jackett

- by JuergenKress

- by mseika

- by mseika

- by mseika

- by mseika

- by Riuzaki90

- by Richard Lefebvre

- by jamiet

- by Tori Wieldt

- by psheriff

- by psheriff

- by AjarnMark

- by Rob Farley

- by ultan o'broin

- by Rob Farley

- by Christina McKeon

- by Dave Ballantyne

< Previous Page | 92 93 94 95 96 97 98 99 100 | Next Page >