plugin system - Page 96

A Task Management System using three Layer Architecture

This describes three Layer Architecture with example

Read the article

A Task Management System using three Layer Architecture

This describes three Layer Architecture with example...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

System hang when using SSHFS

- by Borivoje Petrovic

This is just a quick note that I want to share with others. It is about the problem that I encountered with my office machine. It was hanging continuously when ssh mount was used. The main problem is, as I assumed, the termination of ssh session, which caused the sshfs not to respond. The solution for this issue is the ServerAliveInterval 60 directive in /etc/ssh/ssh_config file. Hope this someone help!

Read the article

What is the default file system of /var/run, /var/lock

- by Casey

Trying to figure out if my /var/run is using disk or not. See the command output: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg0-root 40G 15G 26G 36% / none 3.9G 340K 3.9G 1% /dev none 3.9G 1.1M 3.9G 1% /dev/shm tmpfs 3.9G 600K 3.9G 1% /tmp none 3.9G 452K 3.9G 1% /var/run none 3.9G 0 3.9G 0% /var/lock none 3.9G 0 3.9G 0% /lib/init/rw /dev/md0 236M 59M 165M 27% /boot /dev/mapper/vg0-home 60G 58G 2.3G 97% /home

Read the article

Why does apt-get install Skype easily while aptitude complains about MAJOR dependency errors?

- by Prateek

I was trying to install Skype on Ubuntu 13.04, from the Canonical repositories. With apt-get it worked easily, while aptitude had a huge problem with dependencies and proposed a complicated solution. Why is this so? Why doesn't aptitude offer whatever apt-get does as a potential solution? Here is the output of both: apt-get install skype: Reading package lists... Building dependency tree... Reading state information... The following extra packages will be installed: gcc-4.7-base:i386 libasound2 libasound2:i386 libasound2-plugins:i386 libasyncns0:i386 libaudio2:i386 libavahi-client3:i386 libavahi-common-data:i386 libavahi-common3:i386 libc6:i386 libcomerr2:i386 libcups2:i386 libdbus-1-3 libdbus-1-3:i386 libdbusmenu-qt2:i386 libdrm-intel1 libdrm-intel1:i386 libdrm-nouveau2 libdrm-nouveau2:i386 libdrm-radeon1 libdrm-radeon1:i386 libdrm2 libdrm2:i386 libexpat1:i386 libffi6:i386 libflac8:i386 libfontconfig1:i386 libfreetype6:i386 libgcc1:i386 libgcrypt11 libgcrypt11:i386 libgl1-mesa-dri libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libglapi-mesa:i386 libglib2.0-0:i386 libgnutls26 libgnutls26:i386 libgpg-error0:i386 libgssapi-krb5-2:i386 libgstreamer-plugins-base0.10-0:i386 libgstreamer0.10-0:i386 libice6:i386 libjack-jackd2-0:i386 libjbig0:i386 libjpeg-turbo8:i386 libjpeg8:i386 libjson0:i386 libk5crypto3:i386 libkeyutils1:i386 libkrb5-3:i386 libkrb5support0:i386 liblcms1:i386 libllvm3.2:i386 liblzma5:i386 libmng1:i386 libmysqlclient18:i386 libogg0:i386 liborc-0.4-0:i386 libp11-kit0:i386 libpciaccess0:i386 libpcre3:i386 libpng12-0:i386 libpulse0:i386 libqt4-dbus libqt4-dbus:i386 libqt4-declarative libqt4-declarative:i386 libqt4-designer libqt4-help libqt4-network libqt4-network:i386 libqt4-opengl libqt4-opengl:i386 libqt4-script libqt4-script:i386 libqt4-scripttools libqt4-sql libqt4-sql:i386 libqt4-sql-mysql:i386 libqt4-sql-sqlite libqt4-svg libqt4-test libqt4-xml libqt4-xml:i386 libqt4-xmlpatterns libqt4-xmlpatterns:i386 libqtcore4 libqtcore4:i386 libqtgui4 libqtgui4:i386 libqtwebkit4:i386 libsamplerate0:i386 libselinux1:i386 libsm6:i386 libsndfile1:i386 libspeexdsp1:i386 libsqlite3-0:i386 libssl1.0.0 libssl1.0.0:i386 libstdc++6:i386 libtasn1-3:i386 libtiff5 libtiff5:i386 libtxc-dxtn-s2tc0:i386 libuuid1:i386 libvorbis0a:i386 libvorbisenc2:i386 libwrap0:i386 libx11-6 libx11-6:i386 libx11-xcb1 libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0 libxcb-dri2-0:i386 libxcb-glx0 libxcb-glx0:i386 libxcb1 libxcb1:i386 libxdamage1:i386 libxdmcp6:i386 libxext6 libxext6:i386 libxfixes3 libxfixes3:i386 libxi6 libxi6:i386 libxml2 libxml2:i386 libxrender1 libxrender1:i386 libxslt1.1:i386 libxss1:i386 libxt6 libxt6:i386 libxv1 libxv1:i386 libxxf86vm1 libxxf86vm1:i386 mysql-common qdbus skype-bin:i386 sni-qt:i386 zlib1g:i386 Suggested packages: nas:i386 glibc-doc:i386 locales:i386 rng-tools rng-tools:i386 libglide3 libglide3:i386 gnutls-bin gnutls-bin:i386 krb5-doc:i386 krb5-user:i386 libvisual-0.4-plugins:i386 gstreamer-codec-install:i386 gnome-codec-install:i386 gstreamer0.10-tools:i386 gstreamer0.10-plugins-base:i386 jackd2:i386 liblcms-utils:i386 pulseaudio:i386 libqt4-declarative-folderlistmodel libqt4-declarative-gestures libqt4-declarative-particles libqt4-declarative-shaders qt4-qmlviewer libqt4-declarative-folderlistmodel:i386 libqt4-declarative-gestures:i386 libqt4-declarative-particles:i386 libqt4-declarative-shaders:i386 qt4-qmlviewer:i386 libqt4-dev libqt4-dev:i386 libthai0:i386 libicu48:i386 qt4-qtconfig qt4-qtconfig:i386 Recommended packages: libtxc-dxtn0:i386 xml-core:i386 The following NEW packages will be installed gcc-4.7-base:i386 libasound2:i386 libasound2-plugins:i386 libasyncns0:i386 libaudio2:i386 libavahi-client3:i386 libavahi-common-data:i386 libavahi-common3:i386 libc6:i386 libcomerr2:i386 libcups2:i386 libdbus-1-3:i386 libdbusmenu-qt2:i386 libdrm-intel1:i386 libdrm-nouveau2:i386 libdrm-radeon1:i386 libdrm2:i386 libexpat1:i386 libffi6:i386 libflac8:i386 libfontconfig1:i386 libfreetype6:i386 libgcc1:i386 libgcrypt11:i386 libgl1-mesa-dri:i386 libgl1-mesa-glx:i386 libglapi-mesa:i386 libglib2.0-0:i386 libgnutls26:i386 libgpg-error0:i386 libgssapi-krb5-2:i386 libgstreamer-plugins-base0.10-0:i386 libgstreamer0.10-0:i386 libice6:i386 libjack-jackd2-0:i386 libjbig0:i386 libjpeg-turbo8:i386 libjpeg8:i386 libjson0:i386 libk5crypto3:i386 libkeyutils1:i386 libkrb5-3:i386 libkrb5support0:i386 liblcms1:i386 libllvm3.2:i386 liblzma5:i386 libmng1:i386 libmysqlclient18:i386 libogg0:i386 liborc-0.4-0:i386 libp11-kit0:i386 libpciaccess0:i386 libpcre3:i386 libpng12-0:i386 libpulse0:i386 libqt4-dbus:i386 libqt4-declarative:i386 libqt4-network:i386 libqt4-opengl:i386 libqt4-script:i386 libqt4-sql:i386 libqt4-sql-mysql:i386 libqt4-xml:i386 libqt4-xmlpatterns:i386 libqtcore4:i386 libqtgui4:i386 libqtwebkit4:i386 libsamplerate0:i386 libselinux1:i386 libsm6:i386 libsndfile1:i386 libspeexdsp1:i386 libsqlite3-0:i386 libssl1.0.0:i386 libstdc++6:i386 libtasn1-3:i386 libtiff5:i386 libtxc-dxtn-s2tc0:i386 libuuid1:i386 libvorbis0a:i386 libvorbisenc2:i386 libwrap0:i386 libx11-6:i386 libx11-xcb1:i386 libxau6:i386 libxcb-dri2-0:i386 libxcb-glx0:i386 libxcb1:i386 libxdamage1:i386 libxdmcp6:i386 libxext6:i386 libxfixes3:i386 libxi6:i386 libxml2:i386 libxrender1:i386 libxslt1.1:i386 libxss1:i386 libxt6:i386 libxv1:i386 libxxf86vm1:i386 mysql-common skype skype-bin:i386 sni-qt:i386 zlib1g:i386 The following packages will be upgraded: libasound2 libdbus-1-3 libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libgcrypt11 libgl1-mesa-dri libgnutls26 libqt4-dbus libqt4-declarative libqt4-designer libqt4-help libqt4-network libqt4-opengl libqt4-script libqt4-scripttools libqt4-sql libqt4-sql-sqlite libqt4-svg libqt4-test libqt4-xml libqt4-xmlpatterns libqtcore4 libqtgui4 libssl1.0.0 libtiff5 libx11-6 libx11-xcb1 libxcb-dri2-0 libxcb-glx0 libxcb1 libxext6 libxfixes3 libxi6 libxml2 libxrender1 libxt6 libxv1 libxxf86vm1 qdbus 41 upgraded, 105 newly installed, 0 to remove and 138 not upgraded. Need to get 85.9 MB/89.2 MB of archives. After this operation, 204 MB of additional disk space will be used. Do you want to continue [Y/n]? aptitude install skype: Reading package lists... Building dependency tree... Reading state information... Reading extended state information... Initialising package states... The following NEW packages will be installed: gcc-4.7-base:i386{a} libasound2:i386{a} libasound2-plugins:i386{a} libasyncns0:i386{a} libaudio2:i386{a} libavahi-client3:i386{a} libavahi-common-data:i386{a} libavahi-common3:i386{a} libc6:i386{a} libcomerr2:i386{a} libcups2:i386{a} libdbus-1-3:i386{a} libdbusmenu-qt2:i386{a} libdrm-intel1:i386{a} libdrm-nouveau2:i386{a} libdrm-radeon1:i386{a} libdrm2:i386{a} libexpat1:i386{a} libffi6:i386{a} libflac8:i386{a} libfontconfig1:i386{a} libfreetype6:i386{a} libgcc1:i386{a} libgcrypt11:i386{a} libgl1-mesa-dri:i386{a} libgl1-mesa-glx:i386{a} libglapi-mesa:i386{a} libglib2.0-0:i386{a} libgnutls26:i386{a} libgpg-error0:i386{a} libgssapi-krb5-2:i386{a} libgstreamer-plugins-base0.10-0:i386{a} libgstreamer0.10-0:i386{a} libice6:i386{a} libjack-jackd2-0:i386{a} libjbig0:i386{a} libjpeg-turbo8:i386{a} libjpeg8:i386{a} libjson0:i386{a} libk5crypto3:i386{a} libkeyutils1:i386{a} libkrb5-3:i386{a} libkrb5support0:i386{a} liblcms1:i386{a} libllvm3.2:i386{a} liblzma5:i386{a} libmng1:i386{a} libmysqlclient18:i386{a} libogg0:i386{a} liborc-0.4-0:i386{a} libp11-kit0:i386{a} libpciaccess0:i386{a} libpcre3:i386{a} libpng12-0:i386{a} libpulse0:i386{a} libqt4-dbus:i386{a} libqt4-declarative:i386{a} libqt4-network:i386{a} libqt4-opengl:i386{a} libqt4-script:i386{a} libqt4-sql:i386{a} libqt4-sql-mysql:i386{a} libqt4-xml:i386{a} libqt4-xmlpatterns:i386{a} libqtcore4:i386{a} libqtgui4:i386{a} libqtwebkit4:i386{a} libsamplerate0:i386{a} libselinux1:i386{a} libsm6:i386{a} libsndfile1:i386{a} libspeexdsp1:i386{a} libsqlite3-0:i386{a} libssl1.0.0:i386{a} libstdc++6:i386{a} libtasn1-3:i386{a} libtiff5:i386{a} libtxc-dxtn-s2tc0:i386{a} libuuid1:i386{a} libvorbis0a:i386{a} libvorbisenc2:i386{a} libwrap0:i386{a} libx11-6:i386{a} libx11-xcb1:i386{a} libxau6:i386{a} libxcb-dri2-0:i386{a} libxcb-glx0:i386{a} libxcb1:i386{a} libxdamage1:i386{a} libxdmcp6:i386{a} libxext6:i386{a} libxfixes3:i386{a} libxi6:i386{a} libxml2:i386{a} libxrender1:i386{a} libxslt1.1:i386{a} libxss1:i386{a} libxt6:i386{a} libxv1:i386{a} libxxf86vm1:i386{a} mysql-common{a} skype skype-bin:i386{a} sni-qt:i386{a} zlib1g:i386{a} The following packages will be upgraded: libasound2 libdbus-1-3 libdrm-intel1 libdrm-nouveau2 libdrm-radeon1 libdrm2 libgcrypt11 libgl1-mesa-dri libgnutls26 libqt4-dbus libqt4-declarative libqt4-network libqt4-opengl libqt4-script libqt4-sql libqt4-xml libqt4-xmlpatterns libqtcore4 libqtgui4 libssl1.0.0 libtiff5 libx11-6 libx11-xcb1 libxcb-dri2-0 libxcb-glx0 libxcb1 libxext6 libxfixes3 libxi6 libxml2 libxrender1 libxt6 libxv1 libxxf86vm1 qdbus 35 packages upgraded, 105 newly installed, 0 to remove and 144 not upgraded. Need to get 81.7 MB/85.0 MB of archives. After unpacking 204 MB will be used. The following packages have unmet dependencies: libqt4-test : Depends: libqtcore4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. libqt4-designer : Depends: libqt4-script (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqt4-xml (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtcore4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtgui4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. libqt4-sql-sqlite : Depends: libqt4-sql (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtcore4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. libqt4-help : Depends: libqt4-network (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqt4-sql (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtcore4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtgui4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. libqt4-svg : Depends: libqtcore4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtgui4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. libqt4-scripttools : Depends: libqt4-script (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtcore4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. Depends: libqtgui4 (= 4:4.8.4+dfsg-0ubuntu9) but 4:4.8.4+dfsg-0ubuntu9.2 is to be installed. The following actions will resolve these dependencies: Remove the following packages: 1) account-plugin-aim 2) account-plugin-facebook 3) account-plugin-flickr 4) account-plugin-generic-oauth 5) account-plugin-google 6) account-plugin-jabber 7) account-plugin-salut 8) account-plugin-twitter 9) account-plugin-windows-live 10) account-plugin-yahoo 11) empathy 12) friends 13) friends-dispatcher 14) friends-facebook 15) friends-twitter 16) gir1.2-signon-1.0 17) gnome-control-center-signon 18) libaccount-plugin-1.0-0 19) libfriends0 20) libqt4-designer 21) libqt4-help 22) libqt4-scripttools 23) libqt4-sql-sqlite 24) libqt4-svg 25) libqt4-test 26) libsignon-glib1 27) mcp-account-manager-uoa 28) nautilus-sendto-empathy 29) python-qt4 30) shotwell 31) signon-plugin-oauth2 32) signon-plugin-password 33) signon-ui 34) signond 35) ubuntu-sso-client-qt 36) ubuntuone-control-panel-qt 37) unity-lens-friends 38) unity-lens-photos 39) unity-scope-gdrive 40) webaccounts-extension-common 41) xul-ext-webaccounts Leave the following dependencies unresolved: 42) mcp-account-manager-uoa recommends gnome-control-center-signon 43) mcp-account-manager-uoa recommends account-plugin-aim 44) mcp-account-manager-uoa recommends account-plugin-jabber 45) mcp-account-manager-uoa recommends account-plugin-google 46) mcp-account-manager-uoa recommends account-plugin-facebook 47) mcp-account-manager-uoa recommends account-plugin-windows-live 48) mcp-account-manager-uoa recommends account-plugin-yahoo 49) mcp-account-manager-uoa recommends account-plugin-salut 50) ubuntu-desktop recommends empathy 51) ubuntu-desktop recommends libqt4-sql-sqlite 52) ubuntu-desktop recommends shotwell 53) ubuntu-desktop recommends ubuntuone-control-panel-qt 54) ubuntu-desktop recommends xul-ext-webaccounts 55) unity recommends unity-lens-photos 56) unity recommends unity-lens-friends 57) unity-lens-files recommends unity-scope-gdrive 58) libqt4-sql recommends libqt4-sql-mysql | libqt4-sql-odbc | libqt4-sql-ps Accept this solution? [Y/n/q/?] And in case this helps, aptitude show skype: Package: skype State: not installed Version: 4.2.0.11-0ubuntu0.12.04.2 Priority: extra Section: net Maintainer: Steve Langasek <[email protected]> Architecture: amd64 Uncompressed Size: 62.5 k Depends: skype-bin Conflicts: skype Description: client for Skype VOIP and instant messaging service Skype is software that enables the world's conversations. Millions of individuals and businesses use Skype to make free video and voice calls, send instant messages and share files with other Skype users. Every day, people also use Skype to make low-cost calls to landlines and mobiles. * Make free Skype-to-Skype calls to anyone else, anywhere in the world. * Call to landlines and mobiles at great rates. * Group chat with up to 200 people or conference call with up to 25 others. * Free to download.

Read the article

HTG Explains: What AppArmor Is and How It Secures Your Ubuntu System

- by Chris Hoffman

AppArmor is an important security feature that’s been included by default with Ubuntu since Ubuntu 7.10. However, it runs silently in the background, so you may not be aware of what it is and what it’s doing. AppArmor locks down vulnerable processes, restricting the damage security vulnerabilities in these processes can cause. AppArmor can also be used to lock down Mozilla Firefox for increased security, but it doesn’t do this by default. How to Use an Xbox 360 Controller On Your Windows PC Download the Official How-To Geek Trivia App for Windows 8 How to Banish Duplicate Photos with VisiPic

Read the article

How to Back Up Your Linux System With Back In Time

- by Chris Hoffman

Ubuntu includes Déjà Dup, an integrated backup tool, but some people prefer Back In Time instead. Back In Time has several advantages over Déjà Dup, including a less-opaque backup format, integrated backup file browser, and more configurability. Déjà Dup still has a few advantages, notably its optional encryption and simpler interface, but Back In Time gives Déjà Dup a run for its money. How to Sync Your Media Across Your Entire House with XBMC How to Own Your Own Website (Even If You Can’t Build One) Pt 2 How to Own Your Own Website (Even If You Can’t Build One) Pt 1

Read the article

How to enable ajax when deriving from System.Web.UI.WebControls.WebControl on controls that are crea

- by Dave

I've built a class that derives from System.Web.UI.WebControl. It basically renders pagination links (same as what you see on top of GridView when enabled) for use above a repeater. I'm creating some anchor tags explicitly inside my nav control obviously, but they don't perform ajax postbacks. My understanding is that ajax requires POSTS to work right? Well, these would be GETs which I think is the problem. Is there a way to achieve what I'm trying to do? Thanks!

Read the article

CakeDC Users Plugin - I Can't Send Emails

- by JimBadger

I apologise for the rambling nature of this question, please bear with me and I'll provide all the extra info needed for you to stop me going mad from failing at something that looks inherently very straightforward... I've just installed CakePHP 2.2, and the first thing I've done is add the cakeDC Users plugin. It's all working, apart from sending an email verification when a user registers. I've tried so many combinations of different things in email.php, that I have now utterly got my knickers in a twist. Whatever I do, when the verification email should be sent, all I get is: No connection could be made because the target machine actively refused it. My email.php currently looks like this: class EmailConfig { public $default = array( 'transport' => 'Smtp', 'from' => '[email protected]', //'charset' => 'utf-8', //'headerCharset' => 'utf-8', ); public $smtp = array( 'transport' => 'Smtp', 'from' => array('Blah <[email protected]>' => 'Chimp'), 'host' => 'ssl://smtp.gmail.com', 'port' => 465, 'timeout' => 30, 'username' => '[email protected]', 'password' => 'secret', 'client' => null, 'log' => false, //'charset' => 'utf-8', //'headerCharset' => 'utf-8', ); public $fast = array( 'from' => '[email protected]', 'sender' => null, 'to' => null, 'cc' => null, 'bcc' => null, 'replyTo' => null, 'readReceipt' => null, 'returnPath' => null, 'messageId' => true, 'subject' => null, 'message' => null, 'headers' => null, 'viewRender' => null, 'template' => false, 'layout' => false, 'viewVars' => null, 'attachments' => null, 'emailFormat' => null, 'transport' => 'Smtp', 'host' => 'blah.net', 'port' => 25, 'timeout' => 30, 'username' => 'user', 'password' => 'secret', 'client' => null, 'log' => true, //'charset' => 'utf-8', //'headerCharset' => 'utf-8', ); } How do I get cakeDC Users plugin to just send a non-SMTP email? Or do I have to use, for example, my Gmail details? But, if I do have to go down the SMTP route, what is wrong with the above? Other info: I'm using the latest version of XAMPP and my PHP install is ssl enabled.

Read the article

Ubuntu 12.10 automatic logout

- by anthony

I just had a new desktop constructed and installed ubuntu 12.10 which was successful for the most part but every time I open up some applications like thunderbird I get automatically logged out and all my windows are closed. System error messages also come up from time to time. Also I'm not sure if this helps but if I select the "Use system title bar and borders" in chromium I will also get logged out and from that point won't be able to use it without getting logged out in the future. If I click on particular links as well. If anyone has any tips on how I can isolate and fix the problem I would greatly appreciate it.

Read the article

Windows no longer boots on dual-boot system

- by N Alex

While trying to delete an Ubuntu partition from my hdd I accidentally rebooted my computer. (Note: the partition was originally made from an existing partition using paragon.) After that when I tried to start the computer I got the GRUB rescue terminal prompt. I wasn't able to do much from that, but I did manage to boot Ubuntu from a USB drive and to run boot-repair. But now when I try to select Windows 7 from the boot selection menu I get the error 0xc0000225. Here is the link to the BootInfo summary created by boot-repair: http://paste.ubuntu.com/1032584/ I have a lot of very important data on my hdd and I would really appreciate your help.

Read the article

sprite animation system height recalculating has some issues

- by Nicolas Martel

Basically, the way it works is that it update the frame to show every let's say 24 ticks and every time the frame update, it recalculates the height and width of the new sprite to render so that my gravity logics and stuff works well. But the problem i am having now is a bit hard to explain in words only, therefore i will use this picture to assist me The picture So what i need basically is that if let's say i froze the sprite at the first frame, then unfreeze it and freeze it at the second frame, have the second frame's sprite (let's say it's a prone move) simply stand on the foothold without starting the gravity and when switching back, have the first sprite go back on the foothold like normal without being under the foothold. I had 2 ideas on doing this but I'm not sure it's the most efficient ways to do it so i wanna hear your inputs.

Read the article

commons-exec: Executing a program on the system PATH?

- by Stefan Kendall

I'm trying to execute a program (convert from ImageMagick, to be specific) whose parent folder exists on the path. Ergo, when I run convert from the command line, it runs the command. The following, however, fails: String command = "convert" CommandLine commandLine = CommandLine.parse(command); commandLine.addArgument(...) ... int exitValue = executor.execute(commandLine); If I specify the full path of the convert executable (C:\Program files\...) then this code works. If I don't do this, I get an exception thrown with exit value 4. How do I get commons-exec to recognize the system path?

Read the article

Problem with jQuery plugin TinySort

- by Volmar

I'm trying to sort a list with the help of jQuery and the TinySort-plugin, and it works good but one thing is not working as i want. My Code is: <!doctype html> <html> <head> <meta charset="UTF-8" /> <title>TinySort problem</title> <script type="text/javascript" src="http://so.volmar.se/www/js/jquery.js"></script> <script type="text/javascript" src="http://so.volmar.se/www/js/jquery.tinysort.min.js"></script> <script type="text/javascript"> function pktsort(way){ if($("div#paket>ul>li.sortdiv>a#s_abc").text() == "A-S"){ $("div#paket>ul>li.sortdiv>a#s_abc").text("S-A"); $("div#paket ul li.sortable").tsort("",{place:"org",returns:true,order:"desc"}); }else{ $("div#paket>ul>li.sortdiv>a#s_abc").text("A-S"); $("div#paket ul li.sortable").tsort("",{place:"org",returns:true,order:"asc"}); } } </script> </head> <body> <div id="paket" title="Paket"> <ul class="rounded"> <li class="sortdiv">Sort: <a href="#" onclick="pktsort();" class="active_sort" id="s_abc">A-S</a></li> <li class="sortable">Almost Famous</li> <li class="sortable">Children of Men</li> <li class="sortable">Coeurs</li> <li class="sortable">Colossal Youth</li> <li class="sortable">Demonlover</li> <li class="sortable">Femme Fatale</li> <li class="sortable">I'm Not There</li> <li class="sortable">In the City of Sylvia</li> <li class="sortable">Into the Wild</li> <li class="sortable">Je rentre à la maison</li> <li class="sortable">King Kong</li> <li class="sortable">Little Miss Sunshine</li> <li class="sortable">Man on Wire</li> <li class="sortable">Milk</li> <li class="sortable">Monsters Inc.</li> <li class="sortable">My Winnipeg</li> <li class="sortable">Ne touchez pas la hache</li> <li class="sortable">Nói albinói</li> <li class="sortable">Regular Lovers</li> <li class="sortable">Shaun of the Dead</li> <li class="sortable">Silent Light</li> <li class="addmore"><b>This text is not supposed to move</b></li> </ul> </div> </body> </html> you can try it out at: http://www.volmar.se/list-prob.html MY PROBLEM IS: I don't want the <li class="addmore"> to move above all the <li class="sortable">-elements when i press the sort-link. i wan't it to always be in the bottom. you can find documentation of the TinySort plugin here. i've tried loads of combinations with place and returns propertys but i just can't get it right.

Read the article

The Raspberry Pi JavaFX In-Car System (Part 3)

- by speakjava

Ras Pi car pt3 Having established communication between a laptop and the ELM327 it's now time to bring in the Raspberry Pi. One of the nice things about the Raspberry Pi is the simplicity of it's power supply. All we need is 5V at about 700mA, which in a car is as simple as using a USB cigarette lighter adapter (which is handily rated at 1A). My car has two cigarette lighter sockets (despite being specified with the non-smoking package and therefore no actual cigarette lighter): one in the centre console and one in the rear load area. This was convenient as my idea is to mount the Raspberry Pi in the back to minimise the disruption to the very clean design of the Audi interior. The first task was to get the Raspberry Pi to communicate using Wi-Fi with the ELM 327. Initially I tried a cheap Wi-Fi dongle from Amazon, but I could not get this working with my home Wi-Fi network since it just would not handle the WPA security no matter what I did. I upgraded to a Wi Pi from Farnell and this works very well. The ELM327 uses Ad-Hoc networking, which is point to point communication. Rather than using a wireless router each connecting device has its own assigned IP address (which needs to be on the same subnet) and uses the same ESSID. The settings of the ELM327 are fixed to an IP address of 192.168.0.10 and useing the ESSID, "Wifi327". To configure Raspbian Linux to use these settings we need to modify the /etc/network/interfaces file. After some searching of the web and a few false starts here's the settings I came up with: auto lo eth0 wlan0 iface lo inet loopback iface eth0 inet static address 10.0.0.13 gateway 10.0.0.254 netmask 255.255.255.0 iface wlan0 inet static address 192.168.0.1 netmask 255.255.255.0 wireless-essid Wifi327 wireless-mode ad-ho0 After rebooting, iwconfig wlan0 reported that the Wi-Fi settings were correct. However, ifconfig showed no assigned IP address. If I configured the IP address manually using ifconfig wlan0 192.168.0.1 netmask 255.255.255.0 then everything was fine and I was able to happily ping the IP address of the ELM327. I tried numerous variations on the interfaces file, but nothing I did would get me an IP address on wlan0 when the machine booted. Eventually I decided that this was a pointless thing to spend more time on and so I put a script in /etc/init.d and registered it with update-rc.d. All the script does (currently) is execute the ifconfig line and now, having installed the telnet package I am able to telnet to the ELM327 via the Raspberry Pi. Not nice, but it works. Here's a picture of the Raspberry Pi in the car for testing In the next part we'll look at running the Java code on the Raspberry Pi to collect data from the car systems.

Read the article

KVM switching from lower resolution system resets Ubuntu high resolution

- by Ed Manet

I'm running 12.04 desktop on my main desktop and it's hooked to a KVM (IOGear miniview) that shares the peripherals with a SLES 11 machine. The SLES 11 machine can't get the same resolution as the Ubuntu machine because of different graphics hardware. If I switch from Ubuntu to SLES and stay there too long, when I switch back to Ubuntu the screen resolution on Ubuntu is reset to the same as SLES. I can get it back easily just opening the Displays configuration; it immediately resets to the high resolution as soon as the Displays window opens. But all my open windows have been maximized and it's a P.I.T.A. having to resize them all again. How do I get it to just stay at the high resolution between switching between systems? Is there a setting in the Xorg conf file I need to set?

Read the article

Oracle Solaris Zones Physical to virtual (P2V)

- by user939057

IntroductionThis document describes the process of creating and installing a Solaris 10 image build from physical system and migrate it into a virtualized operating system environment using the Oracle Solaris 10 Zones Physical-to-Virtual (P2V) capability.Using an example and various scenarios, this paper describes how to take advantage of theOracle Solaris 10 Zones Physical-to-Virtual (P2V) capability with other Oracle Solaris features to optimize performance using the Solaris 10 resource management advanced storage management using Solaris ZFS plus improving operating system visibility with Solaris DTrace. The most common use for this tool is when performing consolidation of existing systems onto virtualization enabled platforms, in addition to that we can use the Physical-to-Virtual (P2V) capability for other tasks for example backup your physical system and move them into virtualized operating system environment hosted on the Disaster Recovery (DR) site another option can be building an Oracle Solaris 10 image repository with various configuration and a different software packages in order to reduce provisioning time.Oracle Solaris ZonesOracle Solaris Zones is a virtualization and partitioning technology supported on Oracle Sun servers powered by SPARC and Intel processors.This technology provides an isolated and secure environment for running applications. A zone is a virtualized operating system environment created within a single instance of the Solaris 10 Operating System.Each virtual system is called a zone and runs a unique and distinct copy of the Solaris 10 operating system.Oracle Solaris Zones Physical-to-Virtual (P2V)A new feature for Solaris 10 9/10.This feature provides the ability to build a Solaris 10 images from physical system and migrate it into a virtualized operating system environmentThere are three main steps using this tool1. Image creation on the source system, this image includes the operating system and optionally the software in which we want to include within the image. 2. Preparing the target system by configuring a new zone that will host the new image.3. Image installation on the target system using the image we created on step 1. The host, where the image is built, is referred to as the source system and the host, where theimage is installed, is referred to as the target system. Benefits of Oracle Solaris Zones Physical-to-Virtual (P2V)Here are some benefits of this new feature: Simple- easy build process using Oracle Solaris 10 built-in commands. Robust- based on Oracle Solaris Zones a robust and well known virtualization technology. Flexible- support migration between V series servers into T or -M-series systems.For the latest server information, refer to the Sun Servers web page. PrerequisitesThe target Oracle Solaris system should be running the latest version of the patching patch cluster. and the minimum Solaris version on the target system should be Solaris 10 9/10.Refer to the latest Administration Guide for Oracle Solaris for a complete procedure on how todownload and install Oracle Solaris. NOTE: If the source system that used to build the image is an older version then the targetsystem, then during the process, the operating system will be upgraded to Solaris 10 9/10(update on attach).Creating the Image Used to distribute the software.We will create an image on the source machine. We can create the image on the local file system and then transfer it to the target machine, or build it into a NFS shared storage andmount the NFS file system from the target machine.Optional before creating the image we need to complete the software installation that we want to include with the Solaris 10 image.An image is created by using the flarcreate command:Source # flarcreate -S -n s10-system -L cpio /var/tmp/solaris_10_up9.flarThe command does the following: -S specifies that we skip the disk space check and do not write archive size data to the archive (faster). -n specifies the image name. -L specifies the archive format (i.e cpio). Optionally, we can add descriptions to the archive identification section, which can help to identify the archive later.Source # flarcreate -S -n s10-system -e "Oracle Solaris with Oracle DB10.2.0.4" -a "oracle" -L cpio /var/tmp/solaris_10_up9.flarYou can see example of the archive identification section in Appendix A: archive identification section.We can compress the flar image using the gzip command or adding the -c option to the flarcreate commandSource # gzip /var/tmp/solaris_10_up9.flarAn md5 checksum can be created for the image in order to ensure no data tamperingSource # digest -v -a md5 /var/tmp/solaris_10_up9.flar Moving the image into the target system.If we created the image on the local file system, we need to transfer the flar archive from the source machine to the target machine.Source # scp /var/tmp/solaris_10_up9.flar target:/var/tmpConfiguring the Zone on the target systemAfter copying the software to the target machine, we need to configure a new zone in order to host the new image on that zone.To install the new zone on the target machine, first we need to configure the zone (for the full zone creation options see the following link: http://docs.oracle.com/cd/E18752_01/html/817-1592/index.html )ZFS integrationA flash archive can be created on a system that is running a UFS or a ZFS root file system.NOTE: If you create a Solaris Flash archive of a Solaris 10 system that has a ZFS root, then bydefault, the flar will actually be a ZFS send stream, which can be used to recreate the root pool.This image cannot be used to install a zone. You must create the flar with an explicit cpio or paxarchive when the system has a ZFS root.Use the flarcreate command with the -L archiver option, specifying cpio or pax as themethod to archive the files. (For example, see Step 1 in the previous section).Optionally, on the target system you can create the zone root folder on a ZFS file system inorder to benefit from the ZFS features (clones, snapshots, etc...).Target # zpool create zones c2t2d0 Create the zone root folder:Target # chmod 700 /zones Target # zonecfg -z solaris10-up9-zonesolaris10-up9-zone: No such zone configuredUse 'create' to begin configuring a new zone.zonecfg:solaris10-up9-zone> createzonecfg:solaris10-up9-zone> set zonepath=/zoneszonecfg:solaris10-up9-zone> set autoboot=truezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone:net> set address=192.168.0.1zonecfg:solaris10-up9-zone:net> set physical=nxge0zonecfg:solaris10-up9-zone:net> endzonecfg:solaris10-up9-zone> verifyzonecfg:solaris10-up9-zone> commitzonecfg:solaris10-up9-zone> exit Installing the Zone on the target system using the imageInstall the configured zone solaris10-up9-zone by using the zoneadm command with the install -a option and the path to the archive.The following example shows how to create an Image and sys-unconfig the zone.Target # zoneadm -z solaris10-up9-zone install -u -a/var/tmp/solaris_10_up9.flarLog File: /var/tmp/solaris10-up9-zone.install_log.AJaGveInstalling: This may take several minutes...The following example shows how we can preserve system identity.Target # zoneadm -z solaris10-up9-zone install -p -a /var/tmp/solaris_10_up9.flar Resource management Some applications are sensitive to the number of CPUs on the target Zone. You need tomatch the number of CPUs on the Zone using the zonecfg command:zonecfg:solaris10-up9-zone>add dedicated-cpuzonecfg:solaris10-up9-zone> set ncpus=16DTrace integrationSome applications might need to be analyzing using DTrace on the target zone, you canadd DTrace support on the zone using the zonecfg command:zonecfg:solaris10-up9-zone>setlimitpriv="default,dtrace_proc,dtrace_user" Exclusive IP stack An Oracle Solaris Container running in Oracle Solaris 10 can have a shared IP stack with the global zone, or it can have an exclusive IP stack (which was released in Oracle Solaris 10 8/07). An exclusive IP stack provides a complete, tunable, manageable and independent networking stack to each zone. A zone with an exclusive IP stack can configure Scalable TCP (STCP), IP routing, IP multipathing, or IPsec. For an example of how to configure an Oracle Solaris zone with an exclusive IP stack, see the following example zonecfg:solaris10-up9-zone set ip-type=exclusivezonecfg:solaris10-up9-zone> add netzonecfg:solaris10-up9-zone> set physical=nxge0 When the installation completes, use the zoneadm list -i -v options to list the installedzones and verify the status.Target # zoneadm list -i -vSee that the new Zone status is installedID NAME STATUS PATH BRAND IP0 global running / native shared- solaris10-up9-zone installed /zones native sharedNow boot the ZoneTarget # zoneadm -z solaris10-up9-zone bootWe need to login into the Zone order to complete the zone set up or insert a sysidcfg file beforebooting the zone for the first time see example for sysidcfg file in Appendix B: sysidcfg filesectionTarget # zlogin -C solaris10-up9-zoneTroubleshootingIf an installation fails, review the log file. On success, the log file is in /var/log inside the zone. Onfailure, the log file is in /var/tmp in the global zone.If a zone installation is interrupted or fails, the zone is left in the incomplete state. Use uninstall -F to reset the zone to the configured state.Target # zoneadm -z solaris10-up9-zone uninstall -FTarget # zonecfg -z solaris10-up9-zone delete -FConclusionOracle Solaris Zones P2V tool provides the flexibility to build pre-configuredimages with different software configuration for faster deployment and server consolidation.In this document, I demonstrated how to build and install images and to integrate the images with other Oracle Solaris features like ZFS and DTrace.Appendix A: archive identification sectionWe can use the head -n 20 /var/tmp/solaris_10_up9.flar command in order to access theidentification section that contains the detailed description.Target # head -n 20 /var/tmp/solaris_10_up9.flarFlAsH-aRcHiVe-2.0section_begin=identificationarchive_id=e4469ee97c3f30699d608b20a36011befiles_archived_method=cpiocreation_date=20100901160827creation_master=mdet5140-1content_name=s10-systemcreation_node=mdet5140-1creation_hardware_class=sun4vcreation_platform=SUNW,T5140creation_processor=sparccreation_release=5.10creation_os_name=SunOScreation_os_version=Generic_142909-16files_compressed_method=nonecontent_architectures=sun4vtype=FULLsection_end=identificationsection_begin=predeploymentbegin 755 predeployment.cpio.ZAppendix B: sysidcfg file sectionTarget # cat sysidcfgsystem_locale=Ctimezone=US/Pacificterminal=xtermssecurity_policy=NONEroot_password=HsABA7Dt/0sXXtimeserver=localhostname_service=NONEnetwork_interface=primary {hostname= solaris10-up9-zonenetmask=255.255.255.0protocol_ipv6=nodefault_route=192.168.0.1}name_service=NONEnfs4_domain=dynamicWe need to copy this file before booting the zoneTarget # cp sysidcfg /zones/solaris10-up9-zone/root/etc/

Read the article

sharepoint custom aspx page with database connection

- by Megini

hi there i have created a custom aspx page whithin my sharepoint site with a sql server connection to a database on that server to select data when i view the page it works but when another user tries to view it it gives the following error : Server Error in '/' Application. Login failed for user 'GRINCOR\GuguK'. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Login failed for user 'GRINCOR\GuguK'. Source Error: The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL: Add a "Debug=true" directive at the top of the file that generated the error. Example: <%@ Page Language="C#" Debug="true" % or: 2) Add the following section to the configuration file of your application: Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode. Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario. Stack Trace: [SqlException (0x80131904): Login failed for user 'GRINCOR\GuguK'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +248 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +245 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +2811 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +53 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +327 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +2445370 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +2445224 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +354 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +703 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +54 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +2414776 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +92 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +1657 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +84 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +1645767 System.Data.SqlClient.SqlConnection.Open() +258 ASP.d7922f0d_ac20_4f87_91a2_a99a52c2b2fa__233736835.DisplayData() in C:\inetpub\wwwroot\wss\VirtualDirectories\80\sites\hrportal2\tester.aspx:151 ASP.d7922f0d_ac20_4f87_91a2_a99a52c2b2fa_233736835._RenderMain(HtmlTextWriter __w, Control parameterContainer) in C:\inetpub\wwwroot\wss\VirtualDirectories\80\sites\hrportal2\tester.aspx:346 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +115 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) +253 System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) +87 System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) +53 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.HtmlControls.HtmlContainerControl.Render(HtmlTextWriter writer) +42 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) +240 System.Web.UI.Page.Render(HtmlTextWriter writer) +38 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4240 Version Information: Microsoft .NET Framework Version:2.0.50727.3603; ASP.NET Version:2.0.50727.3601 can someone give me a solution to this problem ? i am using sharepoint services 3.0

Read the article

Wiki Application With A Reputation System

- by Christofian

I'm really impressed with Stack Exchange's concept of reputation (you gain reputation as you post, and the more you post, the more privileges you get), and I want to apply the concept to a wiki that I am building. Does anyone know of a php wiki that has a concept of privileges/reputation similar to Stack Exchange? I'm not necessarily looking for something identical to SE, I'm just looking for a wiki application that gives users more privileges the more they contribute positively to the wiki (SE has down votes, the wiki should have some way of identifying negative contributions too). The privileges should be category based, so the more active you are in a specific category or page, the more privileges you get for that category. There should also be site wide privileges as well, though those should be harder to access than the category privileges. NOTE: If it is not possible to get category wide privileges and site wide privileges, I will be OK with just category wide privileges or just site wide privileges. I should be able to change the requirements for each privilege, through a administration panel or through editing a file (some wiki applications don't have administration interfaces). Does anyone have a script or a solution that will do this? If the script uses something similar to reputation to determine how much a user has positively contributed to the site, then that is OK too. Please Note: I am looking for a way to rate individual user contributions, not a way to rate the quality of an entire page.

Read the article

PHP Battle System for RPG game

- by Jay

I posted this a while ago on stackoverflow, they thought it would be better place here, I agree. Essentially I know what I want to accomplish, and I have something to the effect of what I want but I am not satisfied with it. Here's the problem. Each user has some states: STR (how hard they hit), DEF (dodging/blocking attacks), SPD (when they can strike), and STAMINA (basically their endurance in game, if this runs out they can no longer fight and lose) What I need is something like this: UserA Stats: STR: 1,000 DEF: 2500 SPD: 2000 (HP: 1000/1000) UserB Stats: STR: 1,500 DEF: 500 SPD: 4000 (HP: 1000/1000) Because the second user has double the speed, he lands twice the amount of hits on the first user, before he gets hit. Because he has less strength than the first users defence, he will do no, to little damage. This is how the battle would theoretically go: UserB strikes UserA for 0 damage UserB strikes UserA for 0 damage UserA strikes UserB for 500 damage UserB strikes UserA for 0 damage UserB strikes UserA for 0 damage UserA strikes UserB for 500 damage, and sends him to the hospital! I was using this code, which is buggy, and not efficient, I just need a better way to do this: http://pastebin.com/15LiQQuJ Oh, and if anyone has some good ideas on how to improve the concept that would be cool too! It's not that elaborate so I'll be thinking of all sorts of things to make it more dynamic. Thanks.

Read the article

System speakers not recognized

- by Kyle Maxwell

Since upgrading to Xubuntu 13.10, sound has not functioned properly (e.g. screeching when playing Skype notifications). Now, however, it does not function at all. pavucontrol only shows Dummy Output and does not recognize the built-in speakers on my Dell Precision M4600. Possibly related, the sound indicator applet does not come up when I click on it, only showing a small white bar underneath it. I have purged and reinstalled pulseaudio. lspci -v shows: 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) Subsystem: Dell Precision M4600 Flags: bus master, fast devsel, latency 0, IRQ 56 Memory at f2560000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: Dell Device 14a3 Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f0080000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel The "Capabilities: <access denied" line makes me wonder if there's a permissions issue, as the Log Out applet now shows "Restart" and "Shutdown" grayed out. groups shows me in: kmaxwell adm dialout cdrom sudo dip plugdev fuse lpadmin netdev sambashare vboxusers

Read the article

Override Java System.currentTimeMillis

- by Mike Clark

Is there a way, either in code or with JVM arguments, to override the current time, as presented via System.currentTimeMillis, other than manually changing the system clock on the host machine? A little background: We have a system that runs a number of accounting jobs that revolve much of their logic around the current date (ie 1st of the month, 1st of the year, etc) Unfortunately, a lot of the legacy code calls functions such as new Date() or Calendar.getInstance(), both of which eventually call down to System.currentTimeMillis. For testing purposes, right now, we are stuck with manually updating the system clock to manipulate what time and date the code thinks that the test is being run. So my question is: Is there a way to override what is returned by System.currentTimeMillis? For example, to tell the JVM to automatically add or subtract some offset before returning from that method? Thanks in advance!

Read the article

System broken after installing Gtk+-3.4.1 with broadway backend enabled

- by Roman D. Boiko

I am running Ubuntu 11.10 from VirtualBox. I installed Gtk+ 3.4.1 (latest stable release) from sources with X11 and broadway backends enabled. In order to do that, I also installed latest versions of glib, libffi, libtiff, libjped, gdk-pixbuf, and pango. Each of them was configured with default options. I.e., they were installed to /usr/local (at least, I see respective folders in /usr/local/include). After reboot and login (regardless which user), desktop is grey for about 30 sec, nothing is displayed. Then Nautilus starts, but nothing else (my locale is Ukrainian, but there is nothing important in text): . During boot, I can access command prompt as root, use dpkg, etc. But I don't know what to do. One idea is to reinstall Gtk+ and other libraries with prefix /usr or /usr/shared. I will try that, but it is quite time-consuming, so any ideas would be welcome. Reverting to earlier snapshot is still possible, but it is 6 days old and I would like to try to solve the problem.

Read the article

Ubuntu 13.04 on UEFI system with Windows Boot Manager as the main loader

- by Mehrdad

On my old laptop (legacy BIOS, MBR disk), this was perfectly possible to get working: I turn on the computer and see the Windows Boot Manager I use EasyBCD (or BootPart, or something else) to add an option to the BCD menu which allows me to boot into GRUB, and then into Ubuntu I can't figure how to do this on my new laptop (UEFI, GPT disk), whether in UEFI or legacy mode. Currently I've installed (and even booted!) Ubuntu on my laptop, but only with the help of an external GRUB (on a USB flash drive). How can I add GRUB as an option in the Windows Boot Manager on a UEFI laptop? (No, I don't want to change my primary boot loader. So no, I don't want to overwrite the Windows boot loader with GRUB.)

Search Results

Search found 51953 results on 2079 pages for 'plugin system'.

Page 96/2079 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103 | Next Page >

- by Borivoje Petrovic

- by Casey

- by Prateek

- by Chris Hoffman

- by Chris Hoffman

- by Dave

- by bioShark

- by JimBadger

- by anthony

- by N Alex

- by Nicolas Martel

- by Stefan Kendall

- by Volmar

- by speakjava

- by Ed Manet

- by user939057

- by Megini

- by Christofian

- by Jay

- by Kyle Maxwell

- by Mike Clark

- by Roman D. Boiko

- by Mehrdad

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103 | Next Page >