Search Results

Search found 24517 results on 981 pages for 'visual studo 2008'.

Page 96/981 | < Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >

• Supermicro IPMI on MBD-X8DAH+-F-O motherboard. Keyboard and mouse do not work after booting Windows Server 2008 R2

  - by LDelgado

  Hell Everyone, I built a server with the mentioned motherboard. I installed Windows Server 2008 R2 Enterprise on this server. IPMI is integrated on the motherboard with its own dedicated NIC. I've got that NIC configured with its own IP address. I can remote into it using IPMI, and I can remotely control the server settings before booting the OS ( BIOS, RAID configuration, etc). When the OS boots, I lose the mouse and keyboard. I cannot use the keyboard or mouse when installing the OS either. So the Keyboard and Mouse only work when no OS is loaded. Once the OS loads I lose it - that is my problem. I've been doing some research and trying a few things, but I have not been successful in fixing this issue. I may be wrong, but based on the things I've found online, it seems that the problem could be caused by the way the OS handles USB. The server is headless. There is no keyboard, mouse, or monitor plugged into it. When I boot up the OS and remote into it, I cannot see a mouse or keyboard listed in the Device Manager. Based on what I've read, it seems that the OS should detect a mouse and a keyboard when connecting remotely via IPMI. The following are the solutions I've tried. Nothing has worked so far: I've updated the firmware of the IPMI component to the latest firmware - 1.33. I made sure that the mouse mode was set to Absolute (Windows OS). I've loaded the factory defaults several times. I've enabled Port64h/60h Emulation under the USB settings in the BIOS. I've disabled USB legacy support in the BIOS. I made sure the firewall wasn't blocking IPMI (disabled the firewall). And that's about it. I've found threads in some forums from people having the same issue as me, but they were not running the same OS. They were either running Linux or FreeBSD. Most of them fixed their problem by selecting the right mouse mode (Linux in their case). There was one other that solved the problem by disabling USB Mass Storage mode. He stated "When I set it to disable USB Mass Storage when no image is loaded, the ukbd came alive, and I'm typing this on the IPMI Console. " source: http://freebsd.1045724.n5.nabble.com/IPMI-Console-No-luck-once-OS-is-booted-td3967868.html I suspect the solution described in the previous paragraph is somehow related to my problem. I've found several threads on the internet with issues describing the same problem, but none of them were with Windows Server 2008 R2. Again, I may be wrong, but it seems like that could be the issue. I just don't know how I go about applying a solution in Windows Server 2008 R2. In any case, I could use your expertise. Maybe I am missing something, or maybe I'm on the right track. Your help is much appreciated. Thank you in advance,

  Read the article

• Visual Studio 2012 crashes everytime I try to debug with error CLR20r3

  - by Chris

  Everytime I try to debug one of my apps I get the below error message. Anyone have any ideas? I tried running Visual Studio in safe mode but I get the same thing. I also tried to repair the install and completely reinstall it with no luck :(. The full Problem Signature is this: Problem signature: Problem Event Name: CLR20r3 Problem Signature 01: devenv.exe Problem Signature 02: 11.0.50727.1 Problem Signature 03: 5011ecaa Problem Signature 04: Microsoft.IntelliTrace.Package.11.0.0 Problem Signature 05: 11.0.50727.1 Problem Signature 06: 5011dad8 Problem Signature 07: 311 Problem Signature 08: 1f1 Problem Signature 09: System.AccessViolationException OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

  Read the article

• Displaying Many-To-Many Database relationship in VB.NET 2008 with DataGrid, MS SQL 2008

  - by user337501

  Computer bombed while posting this, couldnt find a duplicate question but if there is one, forgive me. So, I've run into a wall. And rather than use a ladder to avoid it, I'd like go through it. I'm setting up what I can best describe as a many-to-many relationship in a database. To examplify, imagine I have three primary tables: Items, Categories, Sections(nevermind the potential redundancy) Then I have another table, Properties. Items, Categories, and Sections can be associated with many properties. A single property can be associated with one, all, or none of the other tables. The best way I can figure to do this is to have join tables make the relationship. i.e. tblItems----(Foreign Key)----tblItems_To_Properties----(Foreign Key)----tblProperties In this example, tblItems simply has an "ItemID" Primary Key. tblItems_To_Properties has its own Primary Key(tblItems_To_PropertiesID), a Foreign Key to the Item(ItemID) and a Foreign key to the Property(PropertyID). The Properties table simply has its primary key(PropertyID) I hope this example isnt too confusing...if I have to I can find a way to put a diagram up or something. My problem is, I want to display this in a DataGrid using the Master-Detail method(DevExpress GridControl). I use the tblItems as a test, and I can see the Items in the parent view, but in the child view I see(understandably) the join table and that is it. My goal is to make it so the Grid ignores the join table and shows the Properties table as the only child. Any help on this method or insight into another solution would be muuuuuuuch appreciat

  Read the article

• HOWTO: Disable complex password policy on Hyper-V Server 2008?

  - by Ian Boyd

  How do you disable the password complexity requirements on a Microsoft Hyper-V Server 2008 R2? Keep in mind that when you log into the server, the only UI you have is: And you cannot run gpedit.msc: C:\Users\Administrator>gpedit.msc 'gpedit.msc' is not recognized as an internal or external command, operable program or batch file. because there are no .msc snap-ins installed with Microsoft Hyper-V Server 2008 R2. The problem comes when you're trying to add an account to the server, so you can manage it, but it doesn't like most passwords: And, predictably, typing NET HELPMSG 2245 gives you The password does not meet the password policy requirements. Check the minimum p assword length, password complexity and password history requirements. i hoped it would have been a friendly user experience, and either: offered to disable the password policy tell me how to disable the password policy tell me how to check the minimum password length, password complexity and password history requirements. Password Complexity Requirements The Microsoft's default password complexity for Server Core is: Passwords cannot contain the user’s account name or parts of the user’s full name that exceed two consecutive characters. Passwords must be at least six characters in length. Passwords must contain characters from three of the following four categories: 1.English uppercase characters (A through Z). 2.English lowercase characters (a through z). 3.Base 10 digits (0 through 9). 4.Non-alphabetic characters (for example, !, $, #, %). External links Technet Forums: Hyper-V Server disable complex passwords Technet: Passwords must meet complexity requirements of the installed password filter Update: 2k views? So many people keep coming coming to it: up-vote it!

  Read the article

• How do I configure freeSSHd on Windows Server 2008 so I can log in using ssh?

  - by Daryl Spitzer

  I've installed freeSSHd on a Windows Server 2008 box (following the instructions in How to install an SSH Server in Windows Server 2008), including: created a user named "dspitzer" with NTLM authorization opened an exception for port 22 in the Windows Firewall But when I try to connect (from a Mac OS X 10.5.8 command-line), I get permission denied after entering the password: $ ssh 12.34.56.78 [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried: $ ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried changing the authorization to "Password stored as SHA1 hash" and entering a simple password, but I get the same problem. And I've tried a different user name ("Administrator") with no luck. I've confirmed that I am connecting to the server I'm configuring—if I stop freeSSHd and try to connect I get: $ ssh 12.34.56.78 ssh: connect to host 12.34.56.78 port 22: Operation timed out I get the exact same results from a Linux command-line. Any advice or troubleshooting tips? Update: I tried disabling the firewall (in response to geeklin's comment) and it made no difference. Update #2: I no longer have this machine (I've changed employers), so I have no way of verifying the answers. I guess all I can do is make this question "community wiki".

  Read the article

• How do I configure freeSSHd on Windows Server 2008 so I can log in using ssh?

  - by Daryl Spitzer

  I've installed freeSSHd on a Windows Server 2008 box (following the instructions in How to install an SSH Server in Windows Server 2008), including: created a user named "dspitzer" with NTLM authorization opened an exception for port 22 in the Windows Firewall But when I try to connect (from a Mac OS X 10.5.8 command-line), I get permission denied after entering the password: $ ssh 12.34.56.78 [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried: $ ssh [email protected] [email protected]'s password: Permission denied, please try again. [email protected]'s password: Permission denied, please try again. [email protected]'s password: Received disconnect from 12.34.56.78: 2: Too many attempts. I've also tried changing the authorization to "Password stored as SHA1 hash" and entering a simple password, but I get the same problem. And I've tried a different user name ("Administrator") with no luck. I've confirmed that I am connecting to the server I'm configuring—if I stop freeSSHd and try to connect I get: $ ssh 12.34.56.78 ssh: connect to host 12.34.56.78 port 22: Operation timed out I get the exact same results from a Linux command-line. Any advice or troubleshooting tips? Update: I tried disabling the firewall (in response to geeklin's comment) and it made no difference. Update #2: I no longer have this machine (I've changed employers), so I have no way of verifying the answers. I guess all I can do is make this question "community wiki".

  Read the article

• How to improve Windows Server 2008 R2 to handle many connections?

  - by invisal

  It has been a few days so far that I am trying to figure how to solve this problem. First of all, I am running a website with an average daily page view of 350,000. Previously, all ads management (tracking click and impression that each ads has served) and content were served in a single server with the following spec: Server 1 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 8 GB Storage: 2 x 1 TB hard drives Bandwidth: 10 TB per month To improve our website speed, I decided to separate the ads management script to another dedicated server because we have more than 15 advertisers to 30 advertisers per each page. Server 2 OS: Windows 2008 R2 64-Bit CPU: Intel® Core™ i5 - 4 cores RAM: 4 GB Storage: 2 x 300 GB hard drives Bandwidth: 10 TB per month The Problem The problem is that Server 1 can handle both content and ads system. Now, that I take away the ads system and put it at Server 2. Server 2 can barely serve only ads system. Test First of all, I moved 75% of the ads to Server 2. And then, perform a ping to server: ping -t xxxxx. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Reply from xxxxx bytes=32 time=289ms TTL=116 Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Reply from xxxxx bytes=32 time=348ms TTL=116 Reply from xxxxx bytes=32 time=284ms TTL=116 Then, I moved 100% of the ads to Server 2. Then, perform a ping to server again. [I did the ping for 10 minutes and its following similar pattern as below] Reply from xxxxx bytes=32 time=290ms TTL=116 Request timed out Reply from xxxxx bytes=32 time=320ms TTL=116 Reply from xxxxx bytes=32 time=286ms TTL=116 Request timed out Request timed out Reply from xxxxx bytes=32 time=284ms TTL=116 Attempts Increase MaxUserPort and TcpNumConnection Restart the server Increase IIS Max Instances and Instance MaxRequests Server Resource Only 10%-15% of the network connection is used Only 10%-15% of the CPU is used Only 25% of the memory is used

  Read the article

• Error regarding DNS - "... must be able to resolve names ..." (Windows Server 2008 R2 installation)

  - by Scolytus

  I'm trying to replace our old Windows 2000 Server by a Windows Server 2008 R2. I followed the guide at MSDN. Coming to the step "Install Active Directory Domain Services..." the option to install the DNS-Server was grayed-out. According to Microsoft Support I skipped the DNS Server Installation at this point. (Because of the single-label DNS name) I then installed the DNS-Server role and created a forward-lookup-zone for the domain. When running the Best Practices Analyzer of the DNS-Server role I get these two messages for both domain controllers (the old win2k and the new win 2008 R2): The DNS server [IP address] on [adapter name] must be able to resolve names in the primary DNS domain zone The DNS server [IP address] on [adapter name] must be able to resolve names in the forest root domain name zone The TechCenter articles suggest to use a proper DNS Server - that's pointless when I try to configure a proper DNS Server. How do I configure the DNS Server in a way that it resolves these zones? Or are these errors irrelevant? dcdiag /v /test:DNS Seems to run fine...

  Read the article

• Rename Active Directory domain following Windows 2000 -> 2008 migration.

  - by ewwhite

  I'm working with a site that needs an internal DNS domain rename. It currently has a DNS name of domain.abc.com and NT name of ABC. I'm trying to get to a DNS name of abctrading.com and NT name of ABCTRADING. Split DNS would be used. The site originally ran from a single Windows 2000 domain controller hosting AD, file, print, DHCP and DNS services. There was no Exchange system in the environment. The 50 client PCs are all Windows XP with a handful of users using roaming profiles. All users are in a single OU and there are no group policy/GPOs. I'm a Linux engineer, but have been trying to guide another group of consultants to reach a more suitable setup. With the help of this group, we were able to move the single Windows 2000 system to a set of Windows 2008 R2 servers separated into domain controller and file/print systems (virtualized). We are also trying to add an Exchange 2010 system to this mix. The Windows 2000 server was demoted and is no longer in the picture. This is the tricky part, as client wants the domain renamed and the consultants aren't quite sure how to get through it without another 32-40 hours of testing/implementation. THey say that there's considerable risk to do the rename without a completely isolated test environment. However, this rename has to be done before installing Exchange. So we're stuck at this point. I'd like to know what's involved in renaming the domain at this point. We're on Windows Server 2008. The AD is healthy now. Coming from a Linux background, it seems as though there should be a reasonable path to this. Also, since the original domain appears to be a child/subdomain, would that be a problem here. I'd appreciate any guidance.

  Read the article

• How do I restore a Windows Server 2008 R2 bare metal backup to a Windows Server 2012 R2 Hyper-V instance?

  - by Michael J. Gray

  I have been trying to find a simple way to migrate a physical Windows Server 2008 R2 installation over to a virtual machine hosted on Windows Server 2012 R2 Datacenter Edition /w Hyper-V. I came across the bare metal backup feature on Windows Server 2008 R2 and assumed I would be able to easily back it up and simply restore it into a new virtual machine by booting the installation media and getting into the Windows recovery process. When I attempted this, Hyper-V got into a network based restore process, but I do not have a PXE server or anything like that and I would rather not set it up. I tried mounting the VHD produced in the bare metal backup, just to see if it would somehow work, but it of course did not and failed with an error related to an incorrect boot device. I checked the virtual machine's BIOS settings and everything looked fine. I did not expect this to work anyway, so I stopped working through this method any further. Is there a way to take my bare metal backup and restore it into a virtual machine without a PXE server or SCVMM? I am opening to using proprietary tools but since the last time I did this I used Norton Ghost, which is no longer supported, I figured I would try doing it with what is readily available.

  Read the article

• How do I upgrade Windows Server 2008 R2 Standard (OEM Key) to Enterprise (MSDN Key) using DISM?

  - by Tom Crane

  (Originally asked as After upgrading to 2008 R2 Enterprise and installing more RAM, Windows can only see 4.00 GB but now I know what the question really is...) My Dell server came preinstalled with 2008 R2 Standard. I upgraded to Enterprise to take advantage of more than 32GB RAM. This server is purely for dev and testing, so I want to use my MSDN product key for the upgrade. I originally tried to uprade using the MSDN Enterprise key, but it wouldn't have it: dism /online /Set-Edition:ServerEnterprise /ProductKey:[MSDN key] => Error DISM DISM Transmog Provider: PID=5728 Product key is keyed to [], but user requested transmog to [ServerEnterprise] - CTransmogManager::ValidateTransmogrify I tried several things, including changing the current product key to the MSDN one. Eventually I used a KMS generic key which can be found in several technet forum posts. dism /online /Set-Edition:ServerEnterprise /ProductKey:[KMS Generic Key] ... and this appeared to work. I then changed the product key again (using the control panel) to the MSDN key, thinking that was the end of the matter. Only later when tried to start up VMs did I realise I only had 4GB of usable RAM. I didn't make the connection with the licensing changes at this point and went off on a wild goose chase of BIOS settings, memory configurations and the like. Only later when I saw this... http://social.technet.microsoft.com/Forums/en/winserverTS/thread/6debc586-0977-4731-b418-ca1edb34fe8b ...did I make the connection and reapply the KMS Generic key - which gave me all the RAM back. But now I have a system that isn't properly licensed, presumably I won't be able to activate it as it is, so I've got 2 days to enjoy it. With the MSDN key applied, only 4GB RAM is usable. Is there a way round this without a) rebuilding the server from scratch with the MSDN key from the start or b) buying a retail Enterprise license

  Read the article

• Strange issue ! Local network cache of PHP and Apache2 on Win Server 2008 R2

  - by Ahmed Benlahsen

  Software configuration : I have a new Server with windows server 2008 R2 installed via VMWare. I have installed Apache2.2, PHP5.2 and MySQL5.5 as separated packages. Issue : On my first installation of my application all works great. When I updated some JS and CSS files then I access to my application again from a PC on local network I get the old JS and CSS versions! But when I access to the same application on local server I got the latest versions of those files! Link of my application on local server is : http://localhost/BADIL Link of my application from local network is : http://LOCAL_SERVER_IP/BADIL I never had this kind of issue! I think that there are some cache but I don't know where! Maybe on Win Server 2008 R2 or on VMWare ! The question is : Why when I access to my application on the server all works fine, but when I access to the same application from a local network I have the old version of JS and CSS files?? Any one can help me please?! Regards.

  Read the article

• How to create a static IP on Windows Server 2008 R2 so I can access the server remotely

  - by Aesir

  I have just purchased a HP Proliant N40L which I am intending to use as a NAS, learning tool and just in general something to mess around with. As a student via the Microsoft dreamspark program I can get a free copy of Windows Server 2008 R2 which I am using as the OS. So that I can remote to the box from outside of my local network and so that I can stream media from it to my PS3, I have read that I need to create a static IP for the server and use port forwarding to forward to this IP so I can remote in. Is this correct? I am not really sure how to do this and if I need to make these changes on my router configuration, on the OS or both. I am a novice when it comes to networking however most resources for Windows server 2008 R2 seem to assume a fair amount of experience already. I realise that using this particular OS may seem like overkill for what I currently wish to do with it (stream content to other devices and backup) but as I can get a copy for free it seems sensible. Edit: From reading answers posted I feel I should give more information. I have now tried to add a static IP address using my router configuration settings. I have used the getmac command to get the mac address of the server. My ISP is Virgin Media and I have gone to the LAN IP section and I have added an IP address to the DHCP Reservation Lease Info. I can now use remote desktop connection internally to remote to the server (so I am assuming assigning this IP has worked). How do I configure this on the OS as well? I am also unsure on how I would remote to this machine outside of my local network?

  Read the article

• What can prevent a Server 2008 machine accessing its OWN UNC shares?

  - by Simon

  I need to set up a UNC share for my hosted dedicated server to access a share on itself. Unfortunately TFS requires a UNC share. I am on a Windows Server 2008 Standard SP2 64bit dedicated server behind a PIX 501 firewall hosted with GoDaddy. I just cannot get the server to access itself and get this error: Windows cannot access \\SERVER\SHARE Check the spelling of the name.. etc. I've found numerous questions about this but no answer to my problem. Server 2008 Standard x64 SP2 Workgroup - not domain Windows Firewall is off Computer browser service is on I am trying to access \\MYMACHINE\TFS-BUILDS by typing in - or double clicking. Neither works. Machine has single network card Filesharing wizard says share was ok Share was showing under 'Computer management' Permissions are set to 'everyone' full control No obvious errors in eventlog Reboot didn't fix it Unfortunately I cannot try to access other shares in or out of this machine because it is a hosted dedicated server and the only machine behind a hardware firewall. The only thing left i can think of is that the hardware firewall needs to be configured. I don't think it is this because we have a 2003 Server machine behind a different hardware firewall and that one works fine. What on earth is left?!

  Read the article

• SQL Server 2005 to 2008 DB attach elp please!

  - by Brandon

  I have SQL Server 2005 Standard on my personal machine. I created a very big DB about 21 gb. I made a backup and transferred the .bak file via an ftp program to my dedicated server. I have SQL Server 2008 Enterprise Edition on my dedicated server. I tried restore the transferred .bak file but got an error. I posted the error on here and was told the database is corrupt. How? I don't know. The connection was not interrupted during the ftp transfer. The DB works on my own machine. So then I detached the db on my own machine and transferred the mdf and ldf file to my dedicated server through ftp again and again there were not interruptions. Now I try to attach the db and get this error: The header for file 'DB.mdf' is not a valid database file header. The FILE SIZE property is incorrect. (Microsoft SQL Server, Error: 5172) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=10.00.1442&EvtSrc=MSSQLServer&EvtID=5172&LinkId=20476 I already wasted 21 gb transferring the .bak file. Now I used another 21 to transfer mdf and additional ldf file. Please tell me there's a solution. The db can detach and attach fine on my machine in sql server 2005 but not SQL server 2008 on my server.

  Read the article

• SBS 2008 R2: Did something change with anonymous relays?

  - by gravyface

  Have noticed that prior documentation on setting up anonymous relays in SBS 2008 no longer work without some additional configuration. Used to be able to follow this documentation, which is basically: setup a new receive connector add the IP address(es) that will be permitted to relay check off "anonymous" under Permission Group and then run the Exchange shell script to grant permissions. Now what seems to be happening is that if the permitted IP address happens to fall within the same address space as another more restrictive Receive Connector (like the "Default SBS08" one) and possibly if it's ahead of the new Receive Connector alphabetically (haven't tested that yet), the relay attempt fails with "Client Was Not Authenticated" error. To get it to work, I had to modify the scope of the "Default SBS08" Receive Connector to exclude the one LAN IP that I wanted to allow relaying for. I can't recall ever having to do this for Exchange 2007 Standard and/or any other SBS 2008 servers I've setup over the last couple of years and I don't remember doing this and the wiki entry I added at the office doesn't mention it either. So my question is, has anyone else experienced this? Has there been a new change with R2 or perhaps an Exchange Service Pack?

  Read the article

• Windows Server 2008 R2 creating a multi-year client certificate using the IIS certsrv page while deploying SSTP VPN

  - by Warren P

  I am trying to follow instructions on Technet about deploying a Standard (non-enterprise) SSTP based VPN) that were originally written for Server 2008, but I am using Server 2008 R2, I have gotten as far as the part where it asks you to create a request a Server Authentication certificate. I have deployed IIS, and Active Directory Certificate Services, and chose "Standalone" and "Standard" (non-enterprise) Certificate Authority because I don't have an OID and don't think I should have to get one for a simple deployment of SSTP. The resulting certificates made by the Certification Authority "Issue" command, only have a 1 year period of validity, I want a multi-year certificate. At no point in this process is there any way to input this information unless it's through the Attributes text input area on the Advance Certificate Request page, which appears to be generated using an old ActiveX control, which means I can only do this using the workarounds in the article that I linked at the top, and only using Internet Explorer. Update:: It may be that this question is pointless since self-signed keys do not appear to work, when I try them, using Windows 8 as the VPN client. The problem is that the keys that are self-created by the technique shown here do not have any Certificate Revocation Server URLs and so you get an error "The revocation function was unable to check revocation", and the VPN connection fails.

  Read the article

• Adding a 2008 server to a 2003 Domain with DNS devolution?

  - by mvdwege

  I'm running into a problem adding a 2008 server to our existing 2003 domain, and as I am not a Windows admin, I'm not getting the problem here. Some reading around on Technet seems to indicate that DNS devolution is the issue. Here's the setup: DNS for the entire company is hosted on a Unix server running Bind, including the service records for the Windows domain. Our toplevel is company.local, and functional domains are in subdomains, such as mgt.company.local (our management servers). Our Windows servers live mostly in office.company.local, but some of them live in .mgt.company.local and .customers.company.local. The 2003 servers all succesfully authenticate against company.local as the Windows domain. Their position in the infrastructure is set by setting the primary DNS suffix under the network settings and the computer name dialog. Trying to do the same with a brand new 2008 install throws an error though: "Changing the Primary Domain DNS name of this computer to office.company.local failed [...] The specified server cannot perform the requested operation" I tried googling, but the closest I came was the Technet article on DNS Devolution, and I can't make heads nor tails on how to apply that to my case. Addendum 2012-10-23: The problem is not joining the domain, that works, the problem is that it joins with the wrong name, as .company.local, instead of .office.company.local. So far everything works, but I'm rather afraid to run production like this, because sooner or later something is going to complain about the AD name not matching DNS.

  Read the article

• While try to open the project - getting error.

  - by Gopal

  Using Visual Studio 2008 I have .net file name like UPS.Tek, version - Visual Studio 2005 C# files are UPSReport.cs (Visual C# Source File) UPSConn.Cs (Visual C# Source File) UPSBase.cs (Visual C# Source File) ...., When i try to open the C# files individually in VS 2008, the C# files are opening But When I try to open this UPS.Tek in Visual Studio 2008, It showing error as "make sure the application for the project type .csproj is installed" How to solve this error.

  Read the article

• Why upgrade from SQL 2005 to SQL 2008 R2?

  - by GordyII

  have been tasked to write a document outlining the best reasons to use SQL 2008 R2 instead of SQL 2005 for my brand new BI project. We have a policy of only using two versions at a time and there are still SQL 2000 boxes around here somewhere.... I know the microsoft line on as per this link. http://www.microsoft.com/sqlserver/2008/en/us/why-upgrade.aspx What I want to know is your opinions of which are the best features and why. So if you can help me try to convince management to use a product which is actually up to date, I would appreciate it.

  Read the article

• Where are task scheduler event files stored on Windows Server 2008?

  - by MacGyver

  I tried setting up triggers in Task Scheduler Windows Server 2008, but Microsoft needs to fix a bug that I documented on Stack Overflow. So I can't use triggers until they fix this bug. Basically the Task Scheduler doesn't trigger an event that has a Result Code of 2147942402. http://stackoverflow.com/questions/10933033/windows-server-2008-task-scheduler-trigger-xml-syntax-for-email-notification-ta In the mean time, I'd like to write a task that runs .NET code that queries the log/event files programmatically every 15 minutes and sends success/failure emails based on the events that occured for the given tasks in task scheduler. Here's where the XPath is stored for the Task Trigger XML tab (that I can't rely on): C:\Windows\System32\Tasks\ I cannot find where the events (or log files containing the event ids) of each task are stored. Does anyone know where to find these log files? The log name is "Microsoft-Windows-TaskScheduler/Operational".

  Read the article

• Dark Visual Experience in Visual Studio 2012

  - by Jalpesh P. Vadgama

  I have written whole series related to Visual Studio 2012 features and this post will also be part of same series.You can get all my post related to visual studio from the following link. Visual Studio 2012 feature series Before some days I was searching something and found a great way to change the visual experience of visual studio 2012. I found that there are two type of themes available in visual studio 2012 light and dark under Tools->Option-> General environment value. This is one of newest feature I have found in visual studio 2012. Read More >>

  Read the article

• Source encoding in Visual Web Developer 2008 Express

  - by Sejanus

  Where can I set it? I need files to be encoded in UTF-8 by default... there is nothing in Tools - Options or any other menu as far as I know :( P.S. I don't need to set default encoding for Project or so, I need it to be default for any files I create. Thanks for your help :)

  Read the article

• Visual Studio 2008 marks solution files as version 10.00

  - by bja

  Hi After trying out VS2010b2 also my VS2008 installation changes the versions of solution and project files to "Version 10.00". The MSBuild.exe on our CI Server does not support them. Is there a way to make VS2008 generate sln files with version number 9.00 again? I know, i can fix that manually. But each time I open a solution, the version gets changed back, which is annoying. Cheers, bja

  Read the article

• SQL Server Licensing in a VMware vSphere Cluster

  - by Helvick

  If I have SQL Server 2008 instances running in virtual machines on a VMware vSphere cluster with vMotion\DRS enabled so that the VM's can (potentially) run on any one of the physical servers in the cluster what precisely are the license requirements? For example assume that I have 4 physical ESX Hosts with dual physical CPU's and 3 separate single vCPU Virtual Machines running SQL Server 2008 running in that cluster. How many SQL Standard Processor licenses would I need? Is it 3 (one per VM) or 12 (one per VM on each physical host) or something else? How many SQL Enterprise Processor licenses would I need? Is it 3 (one per VM) or 8 (one for each physical CPU in the cluster) or, again, something else? The range in the list prices for these options goes from $17k to $200k so getting it right is quite important. Bonus question: If I choose the Server+CAL licensing model do I need to buy multiple Server instance licenses for each of the ESX hosts (so 12 copies of the SQL Server Standard server license so that there are enough licenses on each host to run all VM's) or again can I just license the VM and what difference would using Enterprise per server licensing make? Edited to Add Having spent some time reading the SQL 2008 Licensing Guide (63 Pages! Includes Maps!*) I've come across this: • Under the Server/CAL model, you may run unlimited instances of SQL Server 2008 Enterprise within the server farm, and move those instances freely, as long as those instances are not running on more servers than the number of licenses assigned to the server farm. • Under the Per Processor model, you effectively count the greatest number of physical processors that may support running instances of SQL Server 2008 Enterprise at any one time across the server farm and assign that number of Processor licenses And earlier: ..For SQL Server, these rule changes apply to SQL Server 2008 Enterprise only. By my reading this means that for my 3 VM's I only need 3 SQL 2008 Enterprise Processor Licenses or one copy of Server Enterprise + CALs for the cluster. By implication it means that I have to license all processors if I choose SQL 2008 Standard Processor licensing or that I have to buy a copy of SQL Server 2008 Standard for each ESX host if I choose to use CALs. *There is a map to demonstrate that a Server Farm cannot extend across an area broader than 3 timezones unless it's in the European Free Trade Area, I wasn't expecting that when I started reading it.

  Read the article

< Previous Page | 92 93 94 95 96 97 98 99 100 101 102 103  | Next Page >