Search Results

Search found 6976 results on 280 pages for 'active'.

Page 97/280 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Cisco Pix 501 - reaching local host limit, showing odd IP addresses

  - by cdonner

  I am running out of licenses on my Pix 501, and the show local-host command lists a number of odd IP addresses that do not belong to my 10.10.1.* subnet. Any idea what they are? The only thing I could find was a potential ISP: DINSA is Defence Interoperable Network Services Authority, an agency of the Ministry of Defence of the United Kingdom. Does not sound right. I don't see any active connections, though. I can't ping or traceroute these IPs, but they reappear after I clear the list, with various other addresses in that general range, up until the connection limit is reached. Based on the number denied, I suppose I would have a lot more of them had I not the connection limit. Very dubious. Is anybody else seeing this? pixfirewall# show local-host Interface inside: 10 active, 10 maximum active, **118 denied** local host: <10.10.1.110>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.176>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.170>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 1/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.175>, TCP connection count/limit = 11/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 1/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.108>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.33.41.115>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.33.226.124>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.172>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <25.36.114.91>, // ???????????????? what is this? TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): local host: <10.10.1.109>, TCP connection count/limit = 0/unlimited TCP embryonic count = 0 TCP intercept watermark = unlimited UDP connection count/limit = 0/unlimited AAA: Xlate(s): Conn(s): pixfirewall#

  Read the article

• swapping or thrashing with vast amounts of unmapped pagecache

  - by Marco

  EDIT: I noticed that this is more appropriate for superuser.com, I apologize. I don't know how to delete this question. I'm using kubuntu jaunty (i386 32bit), kernel 2.6.28-13-generic. I've 4Gb of RAM, of which only 3317Mb are seen by the system (I guess because of the 32bit system). I'm seeing that the pagecache utilization is continually growing, up to the point that the system is unusable (after a few days). This happens also when I don't do anything (all user applications closed and the bare minimum of services enabled). If enabled, the system starts to use swap space (using it all in the end). Even if swap is disabled, disk activity becomes continuous, with the system unresponsive. For example, right now the system is working (albeit a tad slow), with only firefox and wing ide running, and I have 2Gb cached with only 45Mb mapped: $ free total used free shared buffers cached Mem: 3346388 3247328 99060 0 8416 2117980 -/+ buffers/cache: 1120932 2225456 Swap: 2144668 519448 1625220 $ cat /proc/meminfo MemTotal: 3346388 kB MemFree: 97128 kB Buffers: 7872 kB Cached: 2120224 kB SwapCached: 413860 kB Active: 2304596 kB Inactive: 865984 kB Active(anon): 2279168 kB Inactive(anon): 830236 kB Active(file): 25428 kB Inactive(file): 35748 kB Unevictable: 32 kB Mlocked: 32 kB HighTotal: 2492940 kB HighFree: 5456 kB LowTotal: 853448 kB LowFree: 91672 kB SwapTotal: 2144668 kB SwapFree: 1625244 kB Dirty: 84 kB Writeback: 0 kB AnonPages: 629304 kB Mapped: 45768 kB Slab: 45600 kB SReclaimable: 21756 kB SUnreclaim: 23844 kB PageTables: 4468 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 3817860 kB Committed_AS: 3735020 kB VmallocTotal: 122880 kB VmallocUsed: 9352 kB VmallocChunk: 66600 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 888832 kB If I try to drop the caches, little happes: # sync ; echo 3 > /proc/sys/vm/drop_caches ; free total used free shared buffers cached Mem: 3346388 3220580 125808 0 3020 2100600 -/+ buffers/cache: 1116960 2229428 Swap: 2144668 519356 1625312 Right now I've vm.swappiness = 5, but I've tried also with 0 and 1 (without noticeable differences). I've also tried vm.vfs_cache_pressure = 50 and 150 (again, no differences). As I said the pagecache eats all memory even with swapping turned off. What is happening? How to avoid this? TIA, Marco

  Read the article

• Ubuntu/Windows suddenly freezes

  - by tapan

  I've a strange problem with my ubuntu 10.04 installation. Whenever i boot into ubuntu the entire system freezes / hangs soon after (~ 2 mins in). This problem exists on my windows 7 installation too. However if i start World of Warcraft or Warcraft on windows it doesnt hang for the duration i'm playing the game. After i stop playing and exit the game my laptop hangs inside 2 mins. Here is when it gets weirder. If i disconnect the charger, the laptop doesn't hang. However when I start it in ubuntu recovery mode and drop to root shell and use the 'startx' command everything works perfectly. I cannot figure out what the problem is. i have an intel core2duo 2.2ghz processor, intel mobile 965 graphics, 2 GB RAM for more details here is the output of cat /proc/cpuinfo : processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4389.80 clflush size : 64 power management: processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 15 model name : Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping : 11 cpu MHz : 2201.000 cache size : 4096 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts pni dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm ida tpr_shadow vnmi flexpriority bogomips : 4388.96 clflush size : 64 power management: here is the output of cat /proc/meminfo MemTotal: 2052440 kB MemFree: 55924 kB Buffers: 579352 kB Cached: 821752 kB SwapCached: 704 kB Active: 897124 kB Inactive: 1032256 kB Active(anon): 412140 kB Inactive(anon): 264804 kB Active(file): 484984 kB Inactive(file): 767452 kB Unevictable: 0 kB Mlocked: 0 kB HighTotal: 1178440 kB HighFree: 6012 kB LowTotal: 874000 kB LowFree: 49912 kB SwapTotal: 995988 kB SwapFree: 986616 kB Dirty: 8928 kB Writeback: 0 kB AnonPages: 527596 kB Mapped: 76536 kB Slab: 39480 kB SReclaimable: 21100 kB SUnreclaim: 18380 kB PageTables: 5672 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 2022208 kB Committed_AS: 1856400 kB VmallocTotal: 122880 kB VmallocUsed: 11928 kB VmallocChunk: 104644 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 4096 kB DirectMap4k: 16376 kB DirectMap4M: 892928 kB Also the kern.log doesn't show any errors. What I want to know is what might be the problem, how i could test for it and if there are any solutions I could try. Thanks :).

  Read the article

• AIX: iscsi volumes disappear after reboot

  - by Dan

  We have an IBM P505 AIX box, with two internal disks and a defined iSCSI volume. The iSCSI volume is defined in it's own volume group, and is connected to an IBM iSCSI DS3300 disk array via the secondary onboard ethernet port (ie, we're not using a dedicated HBA, we're using the second onboard ethernet port for iSCSI exclusively.) When we reboot the AIX box, the iSCSI volume doesn't get mounted (which is fine; I've figured out that it fails to mount because AIX tries mounting it's volumes before starting the networking stack.) The problem is, after the server has booted it fails to redetect the iSCSI target as a physical disk. This means the volume group (iscsivg) can't go online. if I run cfgmgr -v to redetect the iscsi volume it successfully detects the iscsi target volume and creates a physical volume reference, but allocates it a different volume ID to what was defined before. eg - rootvg contains hdisk 0 and 1 iscsivg was originally defined with hdisk2 as the physical iSCSI volume. after reboot and running cfgmgr -v, AIX detects physical volumes hdisk0, hdisk11 and hdisk3. As there's no hdisk2, I can't varyon the iscsivg volume group. I can't seem any existing hdisk2 definition in the ODM. I can't easily add or change the definition of the physcial disk in the iscsivg volume group as it won't "varyon". Exporting the volume group deletes it completely, recreating the volume group by "importing" it from the reallocated disk makes it available again, but surely there's a better way? Can I force a specific hdisk drive designation for an iscsi target? How do you bring online iSCSI volumes after a reboot? I assume this "just works" with a dedicated HBA instead of a generic ethernet adapter? By the way, the iSCSI volume works fine once it's mounted; we only have problems getting it working - and only with AIX. The iSCSI array works fine with our Linux and Windows servers; ie the volumes get detected and remounted after boot time without any problems, using generic ethernet adapters. Here's some of the config from the AIX box: defined disks / devices: # lsdev hdisk0 Available 06-08-01-5,0 16 Bit LVD SCSI Disk Drive hdisk1 Available 06-08-01-8,0 16 Bit LVD SCSI Disk Drive hdisk3 Available Other iSCSI Disk Drive iscsi0 Available iSCSI Protocol Device scsi0 Available 06-08-00 PCI-X Dual Channel Ultra320 SCSI Adapter bus scsi1 Available 06-08-01 PCI-X Dual Channel Ultra320 SCSI Adapter bus ses0 Available 06-08-01-15,0 SCSI Enclosure Services Device sisscsia0 Available 06-08 PCI-X Dual Channel Ultra320 SCSI Adapter iscsi target definition in /etc/iscsi/targets: # IBM DS3300 disk array # port 1 on second controller 10.10.xx.xxx 3260 iqn.1992-01.com.lsi:1535.600a0b80005b0a7fxxxxxxxxxxxx physical volumes (after reimporting the volume group) # lspv hdisk0 0003b08a0d4936b6 rootvg active hdisk1 0003b08aaa5cb366 rootvg active hdisk3 0003b08a032d04bb iscsivg active

  Read the article

• Changing default gateway on workstations connected to Windows Domain SBS server

  - by Gary B2312321321

  We have xp workstations connected onto a small business server acting as active directory/isa firewall/proxy (no dhcp). Is there a reason that after installing a 2nd firewall on the network (same subnet etc), that changing the default gateway on the workstations isnt sufficient to route inet traffic through the new firewall? A freshly setup linux box connects straight on to the alternate firewall with just ip, default gateway. dns settings. Will having ISA still active on the network confuse the process? Are there further config settings deeper down in windows that need attention? Any ideas pointers on this would be appreciated? Other info: Firewalls tried: Smoothwall and Ipcop; small ethernet netwoork 40 pcs; can ping to new firwalls from workstations; activating web proxy on new firewall and reconfiguring workstation browser works fine; Point of 2nd firewall is lack of some necessary features on ISA for a linux app; Would be nice to have some redundancy to though

  Read the article

• Enable SMB file sharing on OS X - "Incorrect Password"

  - by Tim Robinson

  I have a Mac running Snow Leopard connected to an Active Directory domain. I can share folders on the Mac and view files from Windows without problems. When I try to enable my Mac account for write access through System Preferences, I'm prompted for my account's password. Even though I'm entering the right one, I get an "Incorrect Password" response. The same process works fine for the local Mac administrator account; it's the Active Directory account I'm having problems with. I followed the advice on this page on apple.com without success: (I used the Mac to reset my domain password, and re-created my login keychain) If you want to use a user account that existed before you installed Mac OS X 10.3 (Panther), you may need to reset the password for the account using Accounts preferences. Can anyone suggest what might be wrong? Until I fix this I can't write to my Mac file share from Windows.

  Read the article

• Fixing Windows 7 hibernation

  - by 80skeys

  I've been mucking around with the partitions on my laptop (I'm an experienced Linux/grub guy) and have somehow ended up affecting the ability of Windows 7 to go into hibernate mode. All other functionality seems to be okay. But when I press Hibernate, it behaves as if it starts to (screen goes dark, a little disk activity) but never powers off and if I move the mouse the login screen instantly comes up. I don't know if Window uses a separate partition for hibernation? There is a 200MB partition on the drive - I seem to recall it was related to diagnostics or some other Windows- boot menu stuff. In any case, wondering if there's some commands I can run to restore the ability to hibernate and also which partitions need to be marked "active" and if there's anything I need to do to the MBR of the hard drive or the MBR of the Windows partition? As I said, Windows boots fine as long as it is designated the Active partition. I just need to fix Hibernation.

  Read the article

• The User Profile Service

  - by Daryl Gill

  I tried logging into my computer after an "ungraceful" shutdown due to a power cut.. I got prompted with a message stating the user profile service failed the login. After reading a k/b on Microsoft I managed to re-login to the "corrupt" account by making registery edits.. But the next step (After having the ability to logon) is a major concern for me.. Would the guys at superuser suggest: 1) Carry on using said account 2) Re-install Windows to eliminate the possible chance of a reoccouring problem 3) Migrate all user data over to a new account and with that being said above. I had to issue the command line: net user administrator /active:yes to activate the hidden adminstrator account, would it be recommended/secure to disable the account or leave it active?

  Read the article

• Using a 64bit Linux kernel, can't see more than 4GB of RAM in /proc/meminfo

  - by Chris Huang-Leaver

  I'm running my new computer which has 8GB of RAM installed, which is visable from BIOS page, does not show in /proc/meminfo uname -a Linux localhost 3.0.6-gentoo #2 SMP PREEMPT Sat Nov 19 10:45:22 GMT-- x86_64 AMD Phenom(tm) II X4 955 Processor AuthenticAMD GNU/Linux The result of /proc/meminfo is as follows: (thans Andrey) MemTotal: 4021348 kB MemFree: 1440280 kB Buffers: 23696 kB Cached: 1710828 kB SwapCached: 4956 kB Active: 1389904 kB Inactive: 841364 kB Active(anon): 1337812 kB Inactive(anon): 714060 kB Active(file): 52092 kB Inactive(file): 127304 kB Unevictable: 32 kB Mlocked: 32 kB SwapTotal: 8388604 kB SwapFree: 8047900 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 492732 kB Mapped: 47528 kB Shmem: 1555120 kB Slab: 267724 kB SReclaimable: 177464 kB SUnreclaim: 90260 kB KernelStack: 1176 kB PageTables: 12148 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 10399276 kB Committed_AS: 3293896 kB VmallocTotal: 34359738367 kB VmallocUsed: 317008 kB VmallocChunk: 34359398908 kB AnonHugePages: 120832 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 23552 kB DirectMap2M: 3088384 kB DirectMap1G: 1048576 kB I have tried using mem=8G as a kernel boot parameter, I read a post about setting HIGHMEM64G to yes, before realising that only applies to 32bit kernels. Trying dmindecode -t memory SMBIOS 2.7 present. Handle 0x0026, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: Multi-bit ECC Maximum Capacity: 32 GB Error Information Handle: Not Provided Number Of Devices: 4 Handle 0x0028, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: Array1_PartNumber0 Rank: Unknown Handle 0x002A, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: Array1_PartNumber1 Rank: Unknown Handle 0x002C, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 64 bits Size: 4096 MB Form Factor: DIMM Set: None Locator: DIMM2 Bank Locator: BANK2 Type: <OUT OF SPEC> Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Manufacturer2 Serial Number: SerNum2 Asset Tag: AssetTagNum2 Part Number: Array1_PartNumber2 Rank: Unknown Handle 0x002E, DMI type 17, 34 bytes Memory Device Array Handle: 0x0026 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: No Module Installed Form Factor: DIMM Set: None Locator: DIMM3 Bank Locator: BANK3 Type: Unknown Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer3 Serial Number: SerNum3 Asset Tag: AssetTagNum3 Part Number: Array1_PartNumber3 Rank: Unknown

  Read the article

• Windows Server 2012 & Exchange Server 2013 CAL's

  - by Joey Harris

  Trying to build an Exchange server solution for a company and they want me to look into licensing for Windows. I'm going to be purchasing the necessary server licenses for Windows Server 2012 Standard and Microsoft Exchange 2013 Enterprise. I just have a few questions about the CAL's thing which seems like a complete ripoff to me. How are CAL's tracked for both Windows Server and Exchange? Is it tied to Active Directory profiles? What happens if I dont have the necessary CAL's for Windows Server? Will a client be denied access from Active Directory? Is there any enforcement for this? Also the same question for Exchange 2013 CAL's Thanks

  Read the article

• Logging on as root without winbind timeouts

  - by Josh Kelley

  How can I set up my Linux box so that, if the Active Directory domain controller is down, I can still log in as root, without any timeouts or delays? Following the example of most of the documentation out there, I've listed pam_winbind.so before pam_unix.so in my /etc/pam.d configurations. I believe that this is the cause of the problem. I remember seeing alternate /etc/pam.d setups that change the order and maybe add either pam_localuser or pam_succeed_if (to see if the uid is less than 500), but I can't find any specifics now (and I'm not enough of an expert in PAM to quickly and easily come up with a robust configuration on my own). What is the recommended setup for PAM with Winbind to avoid timeouts and delays if Active Directory is unavailable?

  Read the article

• Ethernet interface number changed, and old one does not exist, but does not leave IP address

  - by Sagar

  I have a virtual machine with Mandriva 2007.0 (yes, old - unfortunately we do not have a choice here). Anyway, the problem: Before reboot: active network interface = eth0. No other interfaces present, and network manager confirms this. Static IP address set to 172.31.2.22. No issues, everything working properly, routing et al. -------Reboot--------- After reboot: active network interface = eth1, with a DHCP address. Network manager shows eth0 as disconnected, and not connectable. When I try to set eth1 up with the static IP address (same one), it says "In Use". I then tried ifconfig eth0 172.31.2.29 just to free it up from the eth0 interface so I could use it with eth1 (since this is connected). Result: ifconfig eth0 172.31.2.29 SIOCSIFADDR: No such device eth0: unknown interface: No such device Nothing else changed. Any ideas what could be happening, or at least how I can get my IP address back?

  Read the article

• Disable laptop screen

  - by Kyle

  I recently had the display fail on my Dell Inspiron E1505 laptop. I currently have my TV hooked up to the laptop's S-Video out which works fine as long as I'm running in Windows. For the first minute or so when the computer is booting I get no display. I was wondering if there was any way to disable the laptop screen entirely so that the TV display is active from the beginning (not just after Windows loads). I realize there may be a BIOS setting for this, my only problem is I can't see the BIOS settings screen since no display is active at that point so if anyone has any BIOS setting solutions I'd need the exact keystrokes to hit :)

  Read the article

• showing the breadcrumb trail in the menu

  - by strangeloops

  I have a global menu and local menu for the products. I would like to highlight 'our products' link when I am showing the products and also highlight the name of the product and its subpages in the local menu so the highlighted links will work as the breadcrumbs. How can I do this with jquery and codeigniter or just jquery. Here is the code of the local menu: <ul id="accordion"> <li class="pm"><h2><?php echo anchor('/products/thassos_wonder', 'Thassos Wonder+');?></h2> <ul class="product_menu"> <h2><?php echo anchor('/products/thassos_wonder', 'Thassos Wonder+');?></h2> <h2><?php echo anchor('/products/thassos_wonder_advantages', 'Thassos Wonder+ Advantages');?></h2> <h2><?php echo anchor('products/thassos_wonder_associated_products', 'Associated Products');?></h2> <h2><?php echo anchor('/products/thassos_wonder_brochure', 'Download TW+ Brochure');?></h2> </ul> </li> <li class="pm"><h2><?php echo anchor('/products/marble_wonder', 'Marble Wonder+');?></h2> <ul class="product_menu" id="mwmenu"> <h2><?php echo anchor('/products/marble_wonder', 'Marble Wonder+');?></h2> <h2><?php echo anchor('/products/marble_wonder_advantages', 'Marble Wonder+ Advantages');?></h2> <h2><?php echo anchor('products/marble_wonder_associated_products', 'Associated Products');?></h2> <h2><?php echo anchor('/products/marble_wonder_brochure', 'Download MW+ Brochure');?></h2> </ul> </li> <li class="pm"><h2><?php echo anchor('/products/polybond', 'Poly Bond+');?></h2> <ul class="product_menu" id="pbmenu"> <h2><?php echo anchor('/products/polybond', 'Poly Bond+');?></h2> <h2><?php echo anchor('/products/polybond_advantages', 'PolyBond+ Advantages');?></h2> <h2><?php echo anchor('products/polybond_areas_of_applications', 'Areas of Applications');?></h2> <h2><?php echo anchor('/products/polybond_brochure', 'Download Polybond+ Brochure');?></h2> </ul> </li> Here is the jquery code for the local menu: $(function() { var pathname = location.pathname; var highlight; //highlight home if(pathname == "/"){ highlight = $('ul#accordion > li:first > a:first'); $('a.active').parents('li').addClass('active'); } else { var path = pathname.substring(1); if (path) highlight = $('ul#accordion a[href$="' + path + '"]'); } highlight.attr('class', 'active'); // hide 2nd, 3rd, ... level menus $('ul#accordion ul').hide(); // show child menu on click $('ul#accordion > li > a.product_menu').click(function() { //minor improvement $(this).siblings('ul').toggle("slow"); return false; }); //open to current group (highlighted link) by show all parent ul's $('a.active').parents('ul').show(); //if you only have a 2 level deep navigation you could //use this instead //$('a.selected').parents("ul").eq(0).show(); }); Still learning jquery so type of help would be appreciated. Thanks - G

  Read the article

• IP route ppp0 + eth0 access to outside network

  - by Vitor

  I need some help in define a route I have two connections one from eth0 and other a ppp0 (a 3G card) Not having the ppp0 connection active my route table is: Destination Gateway Genmask Flags Metric Ref Use Iface default DD-WRT 0.0.0.0 UG 100 0 0 eth0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 I can access my webserver from an outside network through ethernet interface Than I have also my ppp0 3G connection active havig the following route table: D estination Gateway Genmask Flags Metric Ref Use Iface default 10.64.64.64 0.0.0.0 UG 0 0 0 ppp0 10.64.64.64 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 Now I only can access my webserver in outside networks through the IP of the 3G connection Note that my server is serving at 0.0.0.0 IP (to all interfaces) But I need to get access to webserver to both interfaces ethernet and 3G connection I only can have access to both connection in local network Any help to configure this network to have both interfaces with outside networks access is welcome Can anyone give me an example to configure this network with 2 gateways to give outside networks access One for IP 192.168.1.149 and other for the ppp0 IP 89.214.60.196 Tanks

  Read the article

• Dual Home HP Server running Win2003

  - by Colm

  Hello everyone. I'm new to server dual homing. I have a HP ProLiant DL360 G4p running Win2003 with 2 NICs , only one is currently active. I'd like to activate the 2nd NIC connected (in a active/passive state) to a 2nd switch with only one IP address and ideally only one mac layer address. The 1st switch is a Cisco 2960G and the 2nd is a Cisco C3560G. There are VLANS, RSTP and PAGP in use already. Can someone give me an idea, in broad terms , of what technology/protocols I should be investigating (HSRP, SLB Teaming etc.) ? I can provide more info if needed. Thanks, Colm.

  Read the article

• Windows Server 2008, IIS7 and Windows Authentication

  - by Chalkey

  We currently have a development server set up which we are trying to test some Windows authentication ASP.NET code on. We have turned on Windows Authentication in IIS7 on Windows Server 2008 R2 fine, and it asks the user for a username and password as excepted, but the problem is it doesn't appear to accept any credentials. This code for example... Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load Page.Title = "Home page for " + User.Identity.Name End Sub ...always returns an empty string. One theory we have is that we dont have Active Directory installed as of yet, we are just testing this by logging on via the machine name not a domain. Is this type of authentication only applicatable to domains (if so we can probably install Active Directory and some test accounts) - or is it possible to get the user identity when logging in using the machine name? Ideally we would like to be able to test this on our local machines (Windows 7 Pro) using our own accounts (again these aren't on a domain) and IIS but this has the same issue as our dev server. Thanks,

  Read the article

• Group Policy Drive Mapping

  - by Scott Jackson

  Hi, How do I get to the screen which allows me to set drive mappings for Active Directory Group Policy ? Thanks Scott

  Read the article

• Firewall Authentication - logon failed

  - by RoseofPurple

  I am attempting to use a Watchguard firebox 550e with Fireware XTM 11 to authenticate incoming traffic for RDP access. I have configured the firewall to use my domain controller for Active directory authentication with a Windows 2000 server farm and added a couple of user accounts to the users list in the firewall, but when I attempt to log onto the authentication page for the firewall, I get Logon failed. I know that the user names work and that the passwords are correct. I am also certain that I have told it to log on using Active Directory instead of the FireboxDB. I have tried using the username alone, the domain\username, and the email address. I believe that the Search base is correct (DC=mydomainname,DC=com), and I did not change any defaults for sAMAccountName (and I do not recall making any changes to those items when configuring the domain structure). Any assistance would be appreciated.

  Read the article

• Entering new user data into AD LDS

  - by Robert Koritnik

  I need some help configuring AD LDS (Active Directory Lightweight Directory Services). I'm not an administrator, have never configured domains and I don't have a clue how to add new users to existing domains. The thing is I need to develop an app on top of Sharepoint 2010 that must be connected to AD. I've chosen AD LDS because I can install it on Windows 7 and it acts as an active directory even though there's no domain controller present in the network. What I've done so far: I've installed AD LDS I've added a new instance with appication directory partition name DN=Air,DC=Watanabe,DC=pri I can connect to it using ADSI Edit and see all kinds of strange But now I don't know what to do? When it opens I can see the window below, but where's next? Can anybody give me some guidelines, how can I add domain users, so I can use them in my app AD required app?

  Read the article

• Will a database server perform better running on 2 CPUs with 16 cores or 4 CPUs with 8 cores?

  - by AlexOdin

  What I have: an online financial application (ASP.NET, C#) at peak we have 5K+ simultaneous users backend is running on Oracle 11g (active server + stand-by using Active Data Guard). At peak - 4K-5K database sessions Oracle is installed on Linux 5.8 (Oracle's unbreakable version) the database size: 7TB disk storage: NetApp (connected with 10GB network) I would like to replace old servers (IT will purchase HP blades BL685C). Servers will have 256GB of RAM. I need your help to figure out what to do with CPUs and cores. Options: 2 CPUs (2.3 GHz) with 16 cores each 4 CPUs (3.0 GHz) with 8 cores each Question: Which one should I pick? P.S. Next year, we will migrate from Oracle to SQL server. I hope, whatever option you recommend will work for both platforms

  Read the article

• Any way to stop VMWare workstation from dropping SSH connections?

  - by oljones

  I have VMWare workstation 8 with a few Linux guests. I have had problems maintaining an active SSH connection to my VMs when they are in bridged mode. I first read that the onboard realtek network cards were not well supported so I bought a Intel Pro/1000 GT card. This supposedly had support. But this made no difference. Connections via SSH are active for about the first 3 minutes then hang and die. I have changed the TCP Checksum offload on the Intel and Realtek NICs, but this only works some of the time and even then not for very long. The best I could do was about 20 minutes before the connection was dropped. Any ideas?

  Read the article

• Sync iPhone applications in iTunes

  - by Uwe Honekamp

  Suppose I have one the one hand one iTunes library on a PC used to sync Outlook contacts and calendar plus on the other hand one iTunes library on a Mac that syncs music, podcasts, apps, ringtones, etc. Both libraries are based on iTunes 9.0.2. It turns out that the iTunes library on the PC always tries to sync apps and ringtones as well. Unfortunately, this boils down to deleting apps and ringtones from the iPhone because the apps are not part of the iTunes library on the PC. After unchecking the checkbox to sync apps and ringtones and plugging the iPhone into the Mac the checkbox is also unchecked on the Mac. It seems as if the settings for syncing apps and ringtones are stored on the iPhone rather than in the particular iTunes library. Whenever syncing apps and ringtones is active on one machine it is also active on the other and vice versa. How can I make the PC ignore apps and ringtones and only sync contacts and calendar?

  Read the article

• Internet wireless connected with limited access, windows vista

  - by r0ca

  I had some malware in my computer so I did a bit of manual work to remove it including resetting TCP/IP. Now the malware is gone. I can see my home wireless network and I can get connected to it but when connected I get the Internet wireless connected with limited access message. When I go to the IE I cannot browse. When I tried to ping 192.168.1.1 I got an Error Code 1231 Unconnected Network Problem. I have deactivated my Windows firewall as I thought it could be hyperactive security. Still no luck. I have Norton but it is not active, I have also Avast and AVG installed but they are not active. Any ideas?

  Read the article

• Is it possible to interrupt or cancel the trash-delete process?

  - by pete

  I am connected to the company server, onsite not remote, which is Windows based. When, in the OS finder, I go to delete a file or directory that resides on the window-based server, the trash progress panel appears as usual. Not infrequently it will just hang there appearing to be active but no progress occurs on the progress bar. So the X is chosen to stop or cancel the process. A new panel appears, and while appearing to be active, again, just hangs there indefinitely. My lack of reputation prevents posting a screen shot - sorry. The question then is this: Is there a way via the Activity Monitor, Terminal, etc. to interrupt this deleting process in the Mac OS? Currently, I have to force shutdown and reboot to eradicate the ever-deleting panel. Finder relaunch does not solve and only eliminates the finder until I force reboot. Any assistance is appreciated. Thanks, Pete iMac, Mac OS X (10.6.8), i7-2.8ghz, 8gb ram

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >