Search Results

Search found 14598 results on 584 pages for 'address'.

Page 97/584 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• python extract from switch output

  - by household2

  I have some info back from a LAN switch as below Vlan 1 is administratively down, line protocol is down Vlan 2 is up, line protocol is up Helper address is 192.168.0.2 Vlan 3 is up, line protocol is up Helper address is not set Vlan 4 is up, line protocol is up Helper address is 192.168.0.2 Vlan 5 is down, line protocol is down Helper address is 192.168.0.2 Vlan 6 is down, line protocol is down Helper address is not set Helper address is not set And the output I'm trying for is Vlan 1,admin down,n/a Vlan 2,up/up, 192.168.0.2 Vlan 3, up/up, not set Vlan 4, up/up, 192.168.0.2 Vlan 5, down/down, 192.168.0.2 Vlan 6, down/down, not set So the helper isn't always there (line 1) sometimes it's set sometimes it isn't, sometimes there are two lines (last Vlan - I only need 1) and the Vlan can have states of admin down, up/up, up/down (not here) and down down. So using Python and pexpect I can get the above output, but I'm having difficulty parsing out the consecutive lines. I've tried enumerate and then use key+1 for the next line, but the fact that there can be 0,1 or 2 lines following the Vlan screws me. Any ideas please?

  Read the article

• Windows Server 2003 seems to pick the 'outgoing' IP address at random from all the ones configured in IIS, how can I make it just use one?

  - by ioSamurai

  We have multiple sites in IIS with different IP addresses. This is cool, want different IPs to all go to this server and use the proper site. However I discovered an issue that when the server makes an outgoing connection, I cannot predict which IP it will use. I had to have one client add ALL the IPs to their firewall so that a certain service could communicate with their server. Well now the time has come to add another IP/site to IIS but I had told them they would not need to add any more IPs. So the question is, how can I make Windows Server 2003 use only ONE specific IP for outgoing calls instead of it being unpredictable? If this is not a good enough description, when I was RDPed into the server and I opened IE and went to 'what is my IP' it was sometimes different which is how I discovered why the one client's firewall was suddenly refusing the connections. How can I just make outgoing calls originate from a static IP yet still allow multiple IPs pointing to different sites in IIS?

  Read the article

• postfix: Temporary lookup failure

  - by mk_89

  I have followed the tutorials step by step for installing and configuring postfix https://help.ubuntu.com/community/Postfix https://help.ubuntu.com/community/PostfixBasicSetupHowto I am trying to test the services to whether Temporary lookup failure error telnet localhost 25 250 2.1.0 Ok rcpt to: fmaster@localhost 451 4.3.0 <fmaster@localhost>: Temporary lookup failure rcpt to: info@localhost 451 4.3.0 <info@localhost>: Temporary lookup failure I have tried searching the web but I have found no solutions, why am I getting this problem? mail.log Sep 24 01:03:05 bookcdb postfix/smtpd[21055]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <info@localhost>: Temporary lookup failure; from=<root@localhost> to=<info@localhost> proto=ESMTP helo=<localhost> Sep 24 01:03:19 bookcdb postfix/smtpd[21055]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <root@localhost>: Temporary lookup failure; from=<root@localhost> to=<root@localhost> proto=ESMTP helo=<localhost> Sep 24 01:08:19 bookcdb postfix/smtpd[21055]: timeout after RCPT from unknown[::1] Sep 24 01:08:19 bookcdb postfix/smtpd[21055]: disconnect from unknown[::1] Sep 24 01:10:49 bookcdb postfix/anvil[21059]: statistics: max connection rate 1/60s for (smtp:::1) at Sep 24 01:00:49 Sep 24 01:10:49 bookcdb postfix/anvil[21059]: statistics: max connection count 1 for (smtp:::1) at Sep 24 01:00:49 Sep 24 01:10:49 bookcdb postfix/anvil[21059]: statistics: max cache size 1 at Sep 24 01:00:49 Sep 24 01:15:36 bookcdb postfix/smtpd[22175]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Sep 24 01:15:36 bookcdb postfix/smtpd[22175]: warning: hostname localhost does not resolve to address ::1: No address associated with hostname Sep 24 01:15:36 bookcdb postfix/smtpd[22175]: connect from unknown[::1] Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: error: open database /etc/postfix/transport.db: No such file or directory Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport lookup error for "*" Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport lookup error for "*" Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport lookup error for "root@localhost" Sep 24 01:15:55 bookcdb postfix/trivial-rewrite[22195]: warning: transport_maps lookup failure Sep 24 01:15:59 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:15:59 bookcdb postfix/trivial-rewrite[22195]: warning: hash:/etc/postfix/transport lookup error for "fmaster@localhost" Sep 24 01:15:59 bookcdb postfix/trivial-rewrite[22195]: warning: transport_maps lookup failure Sep 24 01:15:59 bookcdb postfix/smtpd[22175]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <fmaster@localhost>: Temporary lookup failure; from=<root@localhost> to=<fmaster@localhost> proto=ESMTP helo=<localhost> Sep 24 01:16:30 postfix/smtpd[22175]: last message repeated 5 times Sep 24 01:16:30 bookcdb postfix/smtpd[22175]: disconnect from unknown[::1] Sep 24 01:19:50 bookcdb postfix/anvil[22177]: statistics: max connection rate 1/60s for (smtp:::1) at Sep 24 01:15:36 Sep 24 01:19:50 bookcdb postfix/anvil[22177]: statistics: max connection count 1 for (smtp:::1) at Sep 24 01:15:36 Sep 24 01:19:50 bookcdb postfix/anvil[22177]: statistics: max cache size 1 at Sep 24 01:15:36 Sep 24 01:20:32 bookcdb postfix/qmgr[21039]: D0C596E0B34: from=<[email protected]>, size=442, nrcpt=1 (queue active) Sep 24 01:20:32 bookcdb postfix/qmgr[21039]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 01:20:32 bookcdb postfix/error[22402]: D0C596E0B34: to=<[email protected]>, relay=none, delay=5369, delays=5369/0.01/0/0.09, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 01:24:16 bookcdb postfix/smtpd[22573]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Sep 24 01:24:16 bookcdb postfix/smtpd[22573]: warning: hostname localhost does not resolve to address ::1: No address associated with hostname Sep 24 01:24:16 bookcdb postfix/smtpd[22573]: connect from unknown[::1] Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: error: open database /etc/postfix/transport.db: No such file or directory Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport lookup error for "*" Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport lookup error for "*" Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport lookup error for "root@localhost" Sep 24 01:24:43 bookcdb postfix/trivial-rewrite[22594]: warning: transport_maps lookup failure Sep 24 01:25:14 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:25:14 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport lookup error for "[email protected]" Sep 24 01:25:14 bookcdb postfix/trivial-rewrite[22594]: warning: transport_maps lookup failure Sep 24 01:25:14 bookcdb postfix/smtpd[22573]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <[email protected]>: Temporary lookup failure; from=<root@localhost> to=<[email protected]> proto=ESMTP helo=<localhost> Sep 24 01:25:32 bookcdb postfix/qmgr[21039]: 2E5C36E0A07: from=<[email protected]>, size=438, nrcpt=1 (queue active) Sep 24 01:25:32 bookcdb postfix/qmgr[21039]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 01:25:32 bookcdb postfix/qmgr[21039]: 0EA3A6E0ACC: from=<[email protected]>, size=438, nrcpt=1 (queue active) Sep 24 01:25:32 bookcdb postfix/error[22631]: 2E5C36E0A07: to=<[email protected]>, orig_to=<root>, relay=none, delay=30203, delays=30203/0.01/0/0.1, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 01:25:32 bookcdb postfix/error[22632]: 0EA3A6E0ACC: to=<[email protected]>, orig_to=<root>, relay=none, delay=30115, delays=30115/0.01/0/0.11, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 01:25:58 bookcdb postfix/smtpd[22573]: warning: non-SMTP command from unknown[::1]: subject: fdf Sep 24 01:25:58 bookcdb postfix/smtpd[22573]: disconnect from unknown[::1] Sep 24 01:26:01 bookcdb postfix/smtpd[22573]: warning: hostname localhost does not resolve to address ::1: No address associated with hostname Sep 24 01:26:01 bookcdb postfix/smtpd[22573]: connect from unknown[::1] Sep 24 01:26:10 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:26:10 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport lookup error for "root@locahost" Sep 24 01:26:10 bookcdb postfix/trivial-rewrite[22594]: warning: transport_maps lookup failure Sep 24 01:26:37 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:26:37 bookcdb postfix/trivial-rewrite[22594]: warning: hash:/etc/postfix/transport lookup error for "fmaster@localhost" Sep 24 01:26:37 bookcdb postfix/trivial-rewrite[22594]: warning: transport_maps lookup failure Sep 24 01:26:37 bookcdb postfix/smtpd[22573]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <fmaster@localhost>: Temporary lookup failure; from=<root@locahost> to=<fmaster@localhost> proto=SMTP Sep 24 01:26:45 bookcdb postfix/smtpd[22573]: disconnect from unknown[::1] Sep 24 01:30:05 bookcdb postfix/anvil[22575]: statistics: max connection rate 1/60s for (smtp:::1) at Sep 24 01:24:16 Sep 24 01:30:05 bookcdb postfix/anvil[22575]: statistics: max connection count 1 for (smtp:::1) at Sep 24 01:24:16 Sep 24 01:30:05 bookcdb postfix/anvil[22575]: statistics: max cache size 1 at Sep 24 01:24:16 Sep 24 01:34:57 bookcdb dovecot: master: Dovecot v2.0.19 starting up (core dumps disabled) Sep 24 01:35:02 bookcdb amavis[1009]: starting. /usr/sbin/amavisd-new at mail.bookcdb.com amavisd-new-2.6.5 (20110407), Unicode aware Sep 24 01:35:02 bookcdb amavis[1009]: Perl version 5.014002 Sep 24 01:35:05 bookcdb amavis[1155]: Net::Server: Group Not Defined. Defaulting to EGID '114 114' Sep 24 01:35:05 bookcdb amavis[1155]: Net::Server: User Not Defined. Defaulting to EUID '108' Sep 24 01:35:05 bookcdb amavis[1155]: Module Amavis::Conf 2.208 Sep 24 01:35:05 bookcdb amavis[1155]: Module Archive::Zip 1.30 Sep 24 01:35:05 bookcdb amavis[1155]: Module BerkeleyDB 0.49 Sep 24 01:35:05 bookcdb amavis[1155]: Module Compress::Zlib 2.033 Sep 24 01:35:05 bookcdb amavis[1155]: Module Convert::TNEF 0.17 Sep 24 01:35:05 bookcdb amavis[1155]: Module Convert::UUlib 1.4 Sep 24 01:35:05 bookcdb amavis[1155]: Module Crypt::OpenSSL::RSA 0.27 Sep 24 01:35:05 bookcdb amavis[1155]: Module DB_File 1.821 Sep 24 01:35:05 bookcdb amavis[1155]: Module Digest::MD5 2.51 Sep 24 01:35:05 bookcdb amavis[1155]: Module Digest::SHA 5.61 Sep 24 01:35:05 bookcdb amavis[1155]: Module IO::Socket::INET6 2.69 Sep 24 01:35:05 bookcdb amavis[1155]: Module MIME::Entity 5.502 Sep 24 01:35:05 bookcdb amavis[1155]: Module MIME::Parser 5.502 Sep 24 01:35:05 bookcdb amavis[1155]: Module MIME::Tools 5.502 Sep 24 01:35:05 bookcdb amavis[1155]: Module Mail::DKIM::Signer 0.39 Sep 24 01:35:05 bookcdb amavis[1155]: Module Mail::DKIM::Verifier 0.39 Sep 24 01:35:05 bookcdb amavis[1155]: Module Mail::Header 2.08 Sep 24 01:35:05 bookcdb amavis[1155]: Module Mail::Internet 2.08 Sep 24 01:35:05 bookcdb amavis[1155]: Module Mail::SPF v2.008 Sep 24 01:35:05 bookcdb amavis[1155]: Module Mail::SpamAssassin 3.003002 Sep 24 01:35:05 bookcdb amavis[1155]: Module Net::DNS 0.66 Sep 24 01:35:05 bookcdb amavis[1155]: Module Net::Server 0.99 Sep 24 01:35:05 bookcdb amavis[1155]: Module NetAddr::IP 4.058 Sep 24 01:35:05 bookcdb amavis[1155]: Module Socket6 0.23 Sep 24 01:35:05 bookcdb amavis[1155]: Module Time::HiRes 1.972101 Sep 24 01:35:05 bookcdb amavis[1155]: Module URI 1.59 Sep 24 01:35:05 bookcdb amavis[1155]: Module Unix::Syslog 1.1 Sep 24 01:35:05 bookcdb amavis[1155]: Amavis::DB code loaded Sep 24 01:35:05 bookcdb amavis[1155]: Amavis::Cache code loaded Sep 24 01:35:05 bookcdb amavis[1155]: SQL base code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: SQL::Log code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: SQL::Quarantine NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: Lookup::SQL code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: Lookup::LDAP code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: AM.PDP-in proto code loaded Sep 24 01:35:05 bookcdb amavis[1155]: SMTP-in proto code loaded Sep 24 01:35:05 bookcdb amavis[1155]: Courier proto code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: SMTP-out proto code loaded Sep 24 01:35:05 bookcdb amavis[1155]: Pipe-out proto code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: BSMTP-out proto code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: Local-out proto code loaded Sep 24 01:35:05 bookcdb amavis[1155]: OS_Fingerprint code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: ANTI-VIRUS code loaded Sep 24 01:35:05 bookcdb amavis[1155]: ANTI-SPAM code loaded Sep 24 01:35:05 bookcdb amavis[1155]: ANTI-SPAM-EXT code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: ANTI-SPAM-C code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: ANTI-SPAM-SA code loaded Sep 24 01:35:05 bookcdb amavis[1155]: Unpackers code loaded Sep 24 01:35:05 bookcdb amavis[1155]: DKIM code loaded Sep 24 01:35:05 bookcdb amavis[1155]: Tools code NOT loaded Sep 24 01:35:05 bookcdb amavis[1155]: Found $file at /usr/bin/file Sep 24 01:35:05 bookcdb amavis[1155]: No $altermime, not using it Sep 24 01:35:05 bookcdb amavis[1155]: Internal decoder for .mail Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .F Sep 24 01:35:05 bookcdb amavis[1155]: Found decoder for .Z at /bin/uncompress Sep 24 01:35:05 bookcdb amavis[1155]: Internal decoder for .gz Sep 24 01:35:05 bookcdb amavis[1155]: Found decoder for .bz2 at /bin/bzip2 -d Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .lzo tried: lzop -d Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .rpm tried: rpm2cpio.pl, rpm2cpio Sep 24 01:35:05 bookcdb amavis[1155]: Found decoder for .cpio at /bin/pax Sep 24 01:35:05 bookcdb amavis[1155]: Found decoder for .tar at /bin/pax Sep 24 01:35:05 bookcdb amavis[1155]: Found decoder for .deb at /usr/bin/ar Sep 24 01:35:05 bookcdb amavis[1155]: Internal decoder for .zip Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .7z tried: 7zr, 7za, 7z Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .rar tried: unrar-free Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .arj tried: arj, unarj Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .arc tried: nomarch, arc Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .zoo tried: zoo Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .lha Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .doc tried: ripole Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .cab tried: cabextract Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .tnef Sep 24 01:35:05 bookcdb amavis[1155]: Internal decoder for .tnef Sep 24 01:35:05 bookcdb amavis[1155]: No decoder for .exe tried: unrar-free; arj, unarj Sep 24 01:35:05 bookcdb amavis[1155]: Using primary internal av scanner code for ClamAV-clamd Sep 24 01:35:05 bookcdb amavis[1155]: Found secondary av scanner ClamAV-clamscan at /usr/bin/clamscan Sep 24 01:35:05 bookcdb amavis[1155]: Creating db in /var/lib/amavis/db/; BerkeleyDB 0.49, libdb 5.1 Sep 24 01:35:05 bookcdb postgrey[1219]: Process Backgrounded Sep 24 01:35:05 bookcdb postgrey[1219]: 2012/09/24-01:35:05 postgrey (type Net::Server::Multiplex) starting! pid(1219) Sep 24 01:35:05 bookcdb postgrey[1219]: Using default listen value of 128 Sep 24 01:35:05 bookcdb postgrey[1219]: Binding to TCP port 10023 on host localhost#012 Sep 24 01:35:05 bookcdb postgrey[1219]: Setting gid to "116 116" Sep 24 01:35:05 bookcdb postgrey[1219]: Setting uid to "110" Sep 24 01:35:06 bookcdb spamd[1231]: logger: removing stderr method Sep 24 01:35:08 bookcdb spamd[1233]: spamd: server started on port 783/tcp (running version 3.3.2) Sep 24 01:35:08 bookcdb spamd[1233]: spamd: server pid: 1233 Sep 24 01:35:08 bookcdb spamd[1233]: spamd: server successfully spawned child process, pid 1238 Sep 24 01:35:08 bookcdb spamd[1233]: spamd: server successfully spawned child process, pid 1240 Sep 24 01:35:08 bookcdb spamd[1233]: prefork: child states: SI Sep 24 01:35:08 bookcdb spamd[1233]: prefork: child states: II Sep 24 01:35:15 bookcdb postfix/master[1729]: daemon started -- version 2.9.3, configuration /etc/postfix Sep 24 01:36:08 bookcdb postfix/smtpd[1995]: error: open database /var/lib/mailman/data/aliases.db: No such file or directory Sep 24 01:36:08 bookcdb postfix/smtpd[1995]: warning: hostname localhost does not resolve to address ::1: No address associated with hostname Sep 24 01:36:08 bookcdb postfix/smtpd[1995]: connect from unknown[::1] Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: error: open database /etc/postfix/transport.db: No such file or directory Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport lookup error for "*" Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport lookup error for "*" Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport lookup error for "root@localhost" Sep 24 01:36:51 bookcdb postfix/trivial-rewrite[1999]: warning: transport_maps lookup failure Sep 24 01:37:00 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:37:00 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport lookup error for "fmaster@localhost" Sep 24 01:37:00 bookcdb postfix/trivial-rewrite[1999]: warning: transport_maps lookup failure Sep 24 01:37:00 bookcdb postfix/smtpd[1995]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <fmaster@localhost>: Temporary lookup failure; from=<root@localhost> to=<fmaster@localhost> proto=SMTP Sep 24 01:37:28 bookcdb dovecot: imap-login: Login: user=<mkadiri89>, method=PLAIN, rip=::1, lip=::1, mpid=2730, secured Sep 24 01:37:28 bookcdb dovecot: imap(mkadiri89): Disconnected: Logged out bytes=44/697 Sep 24 01:37:29 bookcdb dovecot: imap-login: Login: user=<mkadiri89>, method=PLAIN, rip=::1, lip=::1, mpid=2732, secured Sep 24 01:37:29 bookcdb dovecot: imap(mkadiri89): Disconnected: Logged out bytes=464/1303 Sep 24 01:37:29 bookcdb dovecot: imap-login: Login: user=<mkadiri89>, method=PLAIN, rip=::1, lip=::1, mpid=2734, secured Sep 24 01:37:29 bookcdb dovecot: imap(mkadiri89): Disconnected: Logged out bytes=117/1395 Sep 24 01:37:31 bookcdb dovecot: imap-login: Login: user=<mkadiri89>, method=PLAIN, rip=::1, lip=::1, mpid=2737, secured Sep 24 01:37:31 bookcdb dovecot: imap(mkadiri89): Disconnected: Logged out bytes=117/1395 Sep 24 01:37:49 bookcdb dovecot: imap-login: Login: user=<root>, method=PLAIN, rip=::1, lip=::1, mpid=2739, secured Sep 24 01:37:49 bookcdb dovecot: imap: Error: user root: Invalid settings in userdb: userdb returned 0 as uid Sep 24 01:37:49 bookcdb dovecot: imap: Error: Invalid user settings. Refer to server log for more information. Sep 24 01:37:54 bookcdb dovecot: imap-login: Login: user=<root>, method=PLAIN, rip=::1, lip=::1, mpid=2741, secured Sep 24 01:37:54 bookcdb dovecot: imap: Error: user root: Invalid settings in userdb: userdb returned 0 as uid Sep 24 01:37:54 bookcdb dovecot: imap: Error: Invalid user settings. Refer to server log for more information. Sep 24 01:38:04 bookcdb dovecot: imap-login: Login: user=<info>, method=PLAIN, rip=::1, lip=::1, mpid=2743, secured Sep 24 01:38:04 bookcdb dovecot: imap(info): Disconnected: Logged out bytes=44/697 Sep 24 01:38:04 bookcdb dovecot: imap-login: Login: user=<info>, method=PLAIN, rip=::1, lip=::1, mpid=2745, secured Sep 24 01:38:04 bookcdb dovecot: imap(info): Disconnected: Logged out bytes=464/1303 Sep 24 01:38:04 bookcdb dovecot: imap-login: Login: user=<info>, method=PLAIN, rip=::1, lip=::1, mpid=2747, secured Sep 24 01:38:04 bookcdb dovecot: imap(info): Disconnected: Logged out bytes=117/1395 Sep 24 01:38:55 bookcdb postfix/smtpd[1995]: disconnect from unknown[::1] Sep 24 01:38:58 bookcdb postfix/smtpd[1995]: warning: hostname localhost does not resolve to address ::1: No address associated with hostname Sep 24 01:38:58 bookcdb postfix/smtpd[1995]: connect from unknown[::1] Sep 24 01:39:11 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport is unavailable. open database /etc/postfix/transport.db: No such file or directory Sep 24 01:39:11 bookcdb postfix/trivial-rewrite[1999]: warning: hash:/etc/postfix/transport lookup error for "info@localhost" Sep 24 01:39:11 bookcdb postfix/trivial-rewrite[1999]: warning: transport_maps lookup failure Sep 24 01:39:37 bookcdb postfix/smtpd[1995]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <fmaster@localhost>: Temporary lookup failure; from=<info@localhost> to=<fmaster@localhost> proto=SMTP Sep 24 01:39:47 bookcdb postfix/smtpd[1995]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <fmaster@localhost>: Temporary lookup failure; from=<info@localhost> to=<fmaster@localhost> proto=SMTP Sep 24 01:40:13 bookcdb postfix/smtpd[1995]: NOQUEUE: reject: RCPT from unknown[::1]: 451 4.3.0 <info@localhost>: Temporary lookup failure; from=<info@localhost> to=<info@localhost> proto=SMTP Sep 24 01:43:08 bookcdb postfix/smtpd[1995]: disconnect from unknown[::1] Sep 24 01:46:08 bookcdb postfix/anvil[1998]: statistics: max connection rate 1/60s for (smtp:::1) at Sep 24 01:36:08 Sep 24 01:46:08 bookcdb postfix/anvil[1998]: statistics: max connection count 1 for (smtp:::1) at Sep 24 01:36:08 Sep 24 01:46:08 bookcdb postfix/anvil[1998]: statistics: max cache size 1 at Sep 24 01:36:08 Sep 24 01:48:05 bookcdb dovecot: imap-login: Login: user=<info>, method=PLAIN, rip=::1, lip=::1, mpid=2805, secured Sep 24 01:48:05 bookcdb dovecot: imap(info): Disconnected: Logged out bytes=85/681 Sep 24 01:51:30 bookcdb dovecot: imap-login: Login: user=<info>, method=PLAIN, rip=::1, lip=::1, mpid=2815, secured Sep 24 01:51:30 bookcdb dovecot: imap(info): Disconnected: Logged out bytes=117/1395 Sep 24 02:05:15 bookcdb postfix/qmgr[1745]: 2EA006E0B32: from=<[email protected]>, size=439, nrcpt=1 (queue active) Sep 24 02:05:15 bookcdb postfix/qmgr[1745]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 02:05:15 bookcdb postfix/qmgr[1745]: E76996E09B2: from=<[email protected]>, size=439, nrcpt=1 (queue active) Sep 24 02:05:15 bookcdb postfix/error[2842]: 2EA006E0B32: to=<[email protected]>, relay=none, delay=8391, delays=8391/0.05/0/0.09, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 02:05:16 bookcdb postfix/error[2843]: E76996E09B2: to=<[email protected]>, relay=none, delay=8416, delays=8416/0.03/0/0.11, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 02:30:15 bookcdb postfix/qmgr[1745]: D0C596E0B34: from=<[email protected]>, size=442, nrcpt=1 (queue active) Sep 24 02:30:15 bookcdb postfix/qmgr[1745]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 02:30:15 bookcdb postfix/error[2914]: D0C596E0B34: to=<[email protected]>, relay=none, delay=9551, delays=9551/0.01/0/0.08, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 02:35:15 bookcdb postfix/qmgr[1745]: 2E5C36E0A07: from=<[email protected]>, size=438, nrcpt=1 (queue active) Sep 24 02:35:15 bookcdb postfix/qmgr[1745]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 02:35:15 bookcdb postfix/qmgr[1745]: 0EA3A6E0ACC: from=<[email protected]>, size=438, nrcpt=1 (queue active) Sep 24 02:35:15 bookcdb postfix/error[2926]: 2E5C36E0A07: to=<[email protected]>, orig_to=<root>, relay=none, delay=34386, delays=34386/0.03/0/0.1, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 02:35:15 bookcdb postfix/error[2927]: 0EA3A6E0ACC: to=<[email protected]>, orig_to=<root>, relay=none, delay=34299, delays=34298/0.02/0/0.12, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 03:15:15 bookcdb postfix/qmgr[1745]: 2EA006E0B32: from=<[email protected]>, size=439, nrcpt=1 (queue active) Sep 24 03:15:15 bookcdb postfix/qmgr[1745]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 03:15:15 bookcdb postfix/qmgr[1745]: E76996E09B2: from=<[email protected]>, size=439, nrcpt=1 (queue active) Sep 24 03:15:15 bookcdb postfix/error[3025]: 2EA006E0B32: to=<[email protected]>, relay=none, delay=12590, delays=12590/0.01/0/0.07, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 03:15:15 bookcdb postfix/error[3026]: E76996E09B2: to=<[email protected]>, relay=none, delay=12616, delays=12616/0.01/0/0.09, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 03:40:15 bookcdb postfix/qmgr[1745]: D0C596E0B34: from=<[email protected]>, size=442, nrcpt=1 (queue active) Sep 24 03:40:15 bookcdb postfix/qmgr[1745]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 03:40:15 bookcdb postfix/error[3097]: D0C596E0B34: to=<[email protected]>, relay=none, delay=13752, delays=13752/0.01/0/0.07, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 03:45:15 bookcdb postfix/qmgr[1745]: 2E5C36E0A07: from=<[email protected]>, size=438, nrcpt=1 (queue active) Sep 24 03:45:15 bookcdb postfix/qmgr[1745]: warning: connect to transport private/smtp-amavis: No such file or directory Sep 24 03:45:15 bookcdb postfix/qmgr[1745]: 0EA3A6E0ACC: from=<[email protected]>, size=438, nrcpt=1 (queue active) Sep 24 03:45:15 bookcdb postfix/error[3129]: 2E5C36E0A07: to=<[email protected]>, orig_to=<root>, relay=none, delay=38586, delays=38586/0.01/0/0.09, dsn=4.3.0, status=deferred (mail transport unavailable) Sep 24 03:45:15 bookcdb postfix/error[3130]: 0EA3A6E0ACC: to=<[email protected]>, orig_to=<root>, relay=none, delay=38498, delays=38498/0.01/0/0.08, dsn=4.3.0, status=deferred (mail transport unavailable) postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases, hash:/var/lib/mailman/data/aliases append_dot_mydomain = no biff = no broken_sasl_auth_clients = yes config_directory = /etc/postfix content_filter = smtp-amavis:[127.0.0.1]:10024 home_mailbox = Maildir/ inet_interfaces = all inet_protocols = all mailbox_command = mailbox_size_limit = 0 mailman_destination_recipient_limit = 1 mydestination = server1.bookcdb.com, bookcdb.com, localhost.bookcdb.com, localho st, bookcdb.com myhostname = server1.bookcdb.com mynetworks = 127.0.0.0/8 myorigin = /etc/mailname readme_directory = no recipient_delimiter = + relay_domains = lists.bookcdb.com relayhost = smtp_tls_note_starttls_offer = yes smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) smtpd_recipient_restrictions = permit_sasl_authenticated,permit_mynetworks,rejec t_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = smtpd_sasl_security_options = noanonymous smtpd_tls_CAfile = /etc/ssl/certs/cacert.pem smtpd_tls_auth_only = no smtpd_tls_cert_file = /etc/ssl/certs/smtpd.crt smtpd_tls_key_file = /etc/ssl/private/smtpd.key smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_tls_session_cache_timeout = 3600s smtpd_use_tls = yes tls_random_source = dev:/dev/urandom transport_maps = hash:/etc/postfix/transport

  Read the article

• Content Management for WebCenter Installation Guide

  - by Gary Niu

  Overvew As we known, there are two way to install Content Management for WebCenter. One way is install it by WebCenter installer wizard, another way is to install it use their own installer. This guide is for the later one. For SSO purpose, I also mentioned how to config OID identity store for Content Management for WebCenter. Content Management for WebCenter( 10.1.3.5.1) Oracle Enterprise Linux R5U4 Basic Installation -bash-3.2$ ./setup.sh Please select your locale from the list.           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Throughout the install, when entering a text value, you can press Enter to accept the default that appears between square brackets ([]). When selecting from a list, you can select the choice followed by an asterisk by pressing Enter. Select installation type from the list.         *1. Install new server          2. Update a server Choice? Content Server Installation Directory Please enter the full pathname to the installation directory. Content Server Core Folder [/oracle/ucm/server]:/opt/oracle/ucm/server Create Directory         *1. yes          2. no Choice? Java virtual machine         *1. Sun Java 1.5.0_11 JDK          2. Specify a custom Java virtual machine Choice? Installing with Java version 1.5.0_11. Enter the location of the native file repository. This directory contains the native files checked in by contributors. Content Server Native Vault Folder [/opt/oracle/ucm/server/vault/]: Create Directory         *1. yes          2. no Choice? Enter the location of the web-viewable file repository. This directory contains files that can be accessed through the web server. Content Server Weblayout Folder [/opt/oracle/ucm/server/weblayout/]: Create Directory         *1. yes          2. no Choice? This server can be configured to manage its own authentication or to allow another master to act as an authentication proxy. Configure this server as a master or proxied server.         *1. Configure as a master server.          2. Configure as server proxied by a local master server. Choice? During installation, an admin server can be installed and configured to manage this server. If there is already an admin server on this system, you can have the installer configure it to administrate this server instead. Select admin server configuration.         *1. Install an admin server to manage this server.          2. Configure an existing admin server to manage this server.          3. Don't configure an admin server. Choice? Enter the location of an executable to start your web browser. This browser will be used to display the online help. Web Browser Path [/usr/bin/firefox]: Content Server System locale           1. Chinese-Simplified           2. Chinese-Traditional           3. Deutsch          *4. English-US           5. English-UK           6. Español           7. Français           8. Italiano           9. Japanese          10. Korean          11. Nederlands          12. Português-Brazil Choice? Please select the region for your timezone from the list.         *1. Use the timezone setting for your operating system          2. Pacific          3. America          4. Atlantic          5. Europe          6. Africa          7. Asia          8. Indian          9. Australia Choice? Please enter the port number that will be used to connect to the Content Server. This port must be otherwise unused. Content Server Port [4444]: Please enter the port number that will be used to connect to the Admin Server. This port must be otherwise unused. Admin Server Port [4440]: Enter a security filter for the server port. Hosts which are allowed to communicate directly with the server port may access any resources managed by the server. Insure that hosts which need access are included in the filter. See the installation guide for more details. Incoming connection address filter [127.0.0.1]:*.*.*.* *** Content Server URL Prefix The URL prefix specified here is used when generating HTML pages that refer to the contents of the weblayout directory within the installation. This prefix must be mapped in the web server Additional Document Directories section of the Content Management administration menu to the physical location of the weblayout directory. For example, "/idc/" would be used in your installation to refer to the URL http://ucm.company.com/idc which would be mapped in the web server to the physical location /oracle/ucm/server/weblayout. Web Server Relative Root [/idc/]: Enter the name of the local mail server. The server will contact this system to deliver email. Company Mail Server [mail]: Enter the e-mail address for the system administrator. Administrator E-Mail Address [sysadmin@mail]: *** Web Server Address Many generated HTML pages refer to the web server you are using. The address specified here will be used when generating those pages. The address should include the host and domain name in most cases. If your webserver is running on a port other than 80, append a colon and the port number. Examples: www.company.com, ucm.company.com:90 Web Server HTTP Address [yekki]:yekki.cn.oracle.com:7777 Enter the name for this instance. This name should be unique across your entire enterprise. It may not contain characters other than letters, numbers, and underscores. Server Instance Name [idc]: Enter a short label for this instance. This label is used on web pages to identify this instance. It should be less than 12 characters long. Server Instance Label [idc]: Enter a long description for this instance. Server Description [Content Server idc]: Web Server         *1. Apache          2. Sun ONE          3. Configure manually Choice? Please select a database from the list below to use with the Content Server. Content Server Database         *1. Oracle          2. Microsoft SQL Server 2005          3. Microsoft SQL Server 2000          4. Sybase          5. DB2          6. Custom JDBC settings          7. Skip database configuration Choice? Manually configure JDBC settings for this database          1. yes         *2. no Choice? Oracle Server Hostname [localhost]: Oracle Listener Port Number [1521]: *** Database User ID The user name is used to log into the database used by the content server. Oracle User [user]:YEKKI_OCSERVER *** Database Password The password is used to log into the database used by the content server. Oracle Password []:oracle Oracle Instance Name [ORACLE]:orcl Configure the JVM to find the JDBC driver in a specific jar file          1. yes         *2. no Choice? The installer can attempt to create the database tables or you can manually create them. If you choose to manually create the tables, you should create them now. Attempt to create database tables          1. yes         *2. no Choice? Select components to install.          1. ContentFolios: Collect related items in folios          2. Folders_g: Organize content into hierarchical folders          3. LinkManager8: Hypertext link management support          4. OracleTextSearch: External Oracle 11g database as search indexer support          5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: 1,2,3,4,5         *1. ContentFolios: Collect related items in folios         *2. Folders_g: Organize content into hierarchical folders         *3. LinkManager8: Hypertext link management support         *4. OracleTextSearch: External Oracle 11g database as search indexer support         *5. ThreadedDiscussions: Threaded discussion management Enter numbers separated by commas to toggle, 0 to unselect all, F to finish: F Checking configuration. . . Configuration OK. Review install settings. . . Content Server Core Folder: /opt/oracle/ucm/server Java virtual machine: Sun Java 1.5.0_11 JDK Content Server Native Vault Folder: /opt/oracle/ucm/server/vault/ Content Server Weblayout Folder: /opt/oracle/ucm/server/weblayout/ Proxy authentication through another server: no Install admin server: yes Web Browser Path: /usr/bin/firefox Content Server System locale: English-US Content Server Port: 4444 Admin Server Port: 4440 Incoming connection address filter: *.*.*.* Web Server Relative Root: /idc/ Company Mail Server: mail Administrator E-Mail Address: sysadmin@mail Web Server HTTP Address: yekki.cn.oracle.com:7777 Server Instance Name: idc Server Instance Label: idc Server Description: Content Server idc Web Server: Apache Content Server Database: Oracle Manually configure JDBC settings for this database: false Oracle Server Hostname: localhost Oracle Listener Port Number: 1521 Oracle User: YEKKI_OCSERVER Oracle Password: 6GP1gBgzSyKa4JW10U8UqqPznr/lzkNn/Ojf6M8GJ8I= Oracle Instance Name: orcl Configure the JVM to find the JDBC driver in a specific jar file: false Attempt to create database tables: no Components: ContentFolios,Folders_g,LinkManager8,OracleTextSearch,ThreadedDiscussions Proceed with install         *1. Proceed          2. Change configuration          3. Recheck the configuration          4. Abort installation Choice? Finished install type Install with warnings at 4/2/10 12:32 AM. Run Scripts -bash-3.2$ ./wc_contentserverconfig.sh /opt/oracle/ucm/server /mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/CS10gR35UpdateBundle.zip' Service 'DELETE_DOC' Extended Service 'DELETE_BYREV_REVISION' Extended Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/ContentAccess/ContentAccess-linux.zip' (internal)      04.02 00:40:38.019      main    updateDocMetaDefinitionV11: adding decimal column Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/Folders_g.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/FusionLibraries.zip' Installing '/opt/oracle/ucm/server/custom/CS10gR35UpdateBundle/extras/JpsUserProvider.zip' Installing '/mnt/hgfs/SOFTWARE/ofm_ucm_generic_10.1.3.5.1_disk1_1of1/ContentServer/webcenter-conf/WcConfigure.zip' Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:24 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:27 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.core.util.JpsConfigUtil getPasswordCredential WARNING: A password credential is expected; instead found . Apr 2, 2010 12:41:28 AM oracle.security.jps.internal.idstore.util.IdentityStoreUtil getUnamePwdFromCredStore WARNING: The credential with map JPS and key ldap.credential does not exist. Restart Content Server to apply updates. Configuring Apache Web Server append the following lines at httpd.conf: include "/opt/oracle/ucm/server/data/users/apache22/apache.conf" Configuring the Identity Store( Optional ) 1.  Stop Oracle Content Server and the Admin Server 2.  Update the Oracle Content Server's JPS configuration file, jps-config.xml: a. add a service instance <serviceInstance provider="idstore.ldap.provider" name="idstore.oid"> <property name="subscriber.name" value="dc=cn,dc=oracle,dc=com"></property> <property name="idstore.type" value="OID"></property> <property name="security.principal.key" value="ldap.credential"></property> <property name="security.principal.alias" value="JPS"></property> <property name="ldap.url" value="ldap://yekki.cn.oracle.com:3060"></property> <extendedProperty> <name>user.search.bases</name> <values> <value>cn=users,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <extendedProperty> <name>group.search.bases</name> <values> <value>cn=groups,dc=cn,dc=oracle,dc=com</value> </values> </extendedProperty> <property name="username.attr" value="uid"></property> <property name="user.login.attr" value="uid"></property> <property name="groupname.attr" value="cn"></property> </serviceInstance> b. Ensure that the <jpsContext> entry in the jps-config.xml file refers to the new serviceInstance, that is, idstore.oid and not idstore.ldap: <jpsContext name="default"> <serviceInstanceRef ref="idstore.oid"/> 3. Run the new script to setup the credentials for idstore.oid in the credential store: cd CONTENT_SERVER_HOME/custom/FusionLibraries/tools -bash-3.2$ ./run_credtool.sh Buildfile: ./../tools/credtool.xml     [input] skipping input as property action has already been set.     [input] Alias: [JPS]     [input] Key: [ldap.credential]     [input] User Name: cn=orcladmin     [input] Password: welcome1     [input] JPS Config: [/opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml] manage-creds:      [echo] @@@ Help: run 'ant manage-creds' command to see the detailed usage      [java] Using default context in /opt/oracle/ucm/server/custom/FusionLibraries/tools/../../../config/jps-config.xml file for credential store.      [java] Credential store location : /opt/oracle/ucm/server/config      [java] Credential with map JPS key ldap.credential stored successfully!      [java]      [java]      [java]     Credential for map JPS and key ldap.credential is:      [java]             PasswordCredential name : cn=orcladmin      [java]             PasswordCredential password : welcome1 BUILD SUCCESSFUL Total time: 1 minute 27 seconds Testing 1. acces http://yekki.cn.oracle.com:7777/idc 2. login in with OID user, for example: orcladmin/welcome1 3. make sure your JpsUserProvider status is "good"

  Read the article

• Metro: Declarative Data Binding

  - by Stephen.Walther

  The goal of this blog post is to describe how declarative data binding works in the WinJS library. In particular, you learn how to use both the data-win-bind and data-win-bindsource attributes. You also learn how to use calculated properties and converters to format the value of a property automatically when performing data binding. By taking advantage of WinJS data binding, you can use the Model-View-ViewModel (MVVM) pattern when building Metro style applications with JavaScript. By using the MVVM pattern, you can prevent your JavaScript code from spinning into chaos. The MVVM pattern provides you with a standard pattern for organizing your JavaScript code which results in a more maintainable application. Using Declarative Bindings You can use the data-win-bind attribute with any HTML element in a page. The data-win-bind attribute enables you to bind (associate) an attribute of an HTML element to the value of a property. Imagine, for example, that you want to create a product details page. You want to show a product object in a page. In that case, you can create the following HTML page to display the product details: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> </head> <body> <h1>Product Details</h1> <div class="field"> Product Name: <span data-win-bind="innerText:name"></span> </div> <div class="field"> Product Price: <span data-win-bind="innerText:price"></span> </div> <div class="field"> Product Picture: <br /> <img data-win-bind="src:photo;alt:name" /> </div> </body> </html> The HTML page above contains three data-win-bind attributes – one attribute for each product property displayed. You use the data-win-bind attribute to set properties of the HTML element associated with the data-win-attribute. The data-win-bind attribute takes a semicolon delimited list of element property names and data source property names: data-win-bind=”elementPropertyName:datasourcePropertyName; elementPropertyName:datasourcePropertyName;…” In the HTML page above, the first two data-win-bind attributes are used to set the values of the innerText property of the SPAN elements. The last data-win-bind attribute is used to set the values of the IMG element’s src and alt attributes. By the way, using data-win-bind attributes is perfectly valid HTML5. The HTML5 standard enables you to add custom attributes to an HTML document just as long as the custom attributes start with the prefix data-. So you can add custom attributes to an HTML5 document with names like data-stephen, data-funky, or data-rover-dog-is-hungry and your document will validate. The product object displayed in the page above with the data-win-bind attributes is created in the default.js file: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { var product = { name: "Tesla", price: 80000, photo: "/images/TeslaPhoto.png" }; WinJS.Binding.processAll(null, product); } }; app.start(); })(); In the code above, a product object is created with a name, price, and photo property. The WinJS.Binding.processAll() method is called to perform the actual binding (Don’t confuse WinJS.Binding.processAll() and WinJS.UI.processAll() – these are different methods). The first parameter passed to the processAll() method represents the root element for the binding. In other words, binding happens on this element and its child elements. If you provide the value null, then binding happens on the entire body of the document (document.body). The second parameter represents the data context. This is the object that has the properties which are displayed with the data-win-bind attributes. In the code above, the product object is passed as the data context parameter. Another word for data context is view model.  Creating Complex View Models In the previous section, we used the data-win-bind attribute to display the properties of a simple object: a single product. However, you can use binding with more complex view models including view models which represent multiple objects. For example, the view model in the following default.js file represents both a customer and a product object. Furthermore, the customer object has a nested address object: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { var viewModel = { customer: { firstName: "Fred", lastName: "Flintstone", address: { street: "1 Rocky Way", city: "Bedrock", country: "USA" } }, product: { name: "Bowling Ball", price: 34.55 } }; WinJS.Binding.processAll(null, viewModel); } }; app.start(); })(); The following page displays the customer (including the customer address) and the product. Notice that you can use dot notation to refer to child objects in a view model such as customer.address.street. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> </head> <body> <h1>Customer Details</h1> <div class="field"> First Name: <span data-win-bind="innerText:customer.firstName"></span> </div> <div class="field"> Last Name: <span data-win-bind="innerText:customer.lastName"></span> </div> <div class="field"> Address: <address> <span data-win-bind="innerText:customer.address.street"></span> <br /> <span data-win-bind="innerText:customer.address.city"></span> <br /> <span data-win-bind="innerText:customer.address.country"></span> </address> </div> <h1>Product</h1> <div class="field"> Name: <span data-win-bind="innerText:product.name"></span> </div> <div class="field"> Price: <span data-win-bind="innerText:product.price"></span> </div> </body> </html> A view model can be as complicated as you need and you can bind the view model to a view (an HTML document) by using declarative bindings. Creating Calculated Properties You might want to modify a property before displaying the property. For example, you might want to format the product price property before displaying the property. You don’t want to display the raw product price “80000”. Instead, you want to display the formatted price “$80,000”. You also might need to combine multiple properties. For example, you might need to display the customer full name by combining the values of the customer first and last name properties. In these situations, it is tempting to call a function when performing binding. For example, you could create a function named fullName() which concatenates the customer first and last name. Unfortunately, the WinJS library does not support the following syntax: <span data-win-bind=”innerText:fullName()”></span> Instead, in these situations, you should create a new property in your view model that has a getter. For example, the customer object in the following default.js file includes a property named fullName which combines the values of the firstName and lastName properties: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { var customer = { firstName: "Fred", lastName: "Flintstone", get fullName() { return this.firstName + " " + this.lastName; } }; WinJS.Binding.processAll(null, customer); } }; app.start(); })(); The customer object has a firstName, lastName, and fullName property. Notice that the fullName property is defined with a getter function. When you read the fullName property, the values of the firstName and lastName properties are concatenated and returned. The following HTML page displays the fullName property in an H1 element. You can use the fullName property in a data-win-bind attribute in exactly the same way as any other property. <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> </head> <body> <h1 data-win-bind="innerText:fullName"></h1> <div class="field"> First Name: <span data-win-bind="innerText:firstName"></span> </div> <div class="field"> Last Name: <span data-win-bind="innerText:lastName"></span> </div> </body> </html> Creating a Converter In the previous section, you learned how to format the value of a property by creating a property with a getter. This approach makes sense when the formatting logic is specific to a particular view model. If, on the other hand, you need to perform the same type of formatting for multiple view models then it makes more sense to create a converter function. A converter function is a function which you can apply whenever you are using the data-win-bind attribute. Imagine, for example, that you want to create a general function for displaying dates. You always want to display dates using a short format such as 12/25/1988. The following JavaScript file – named converters.js – contains a shortDate() converter: (function (WinJS) { var shortDate = WinJS.Binding.converter(function (date) { return date.getMonth() + 1 + "/" + date.getDate() + "/" + date.getFullYear(); }); // Export shortDate WinJS.Namespace.define("MyApp.Converters", { shortDate: shortDate }); })(WinJS); The file above uses the Module Pattern, a pattern which is used through the WinJS library. To learn more about the Module Pattern, see my blog entry on namespaces and modules: http://stephenwalther.com/blog/archive/2012/02/22/windows-web-applications-namespaces-and-modules.aspx The file contains the definition for a converter function named shortDate(). This function converts a JavaScript date object into a short date string such as 12/1/1988. The converter function is created with the help of the WinJS.Binding.converter() method. This method takes a normal function and converts it into a converter function. Finally, the shortDate() converter is added to the MyApp.Converters namespace. You can call the shortDate() function by calling MyApp.Converters.shortDate(). The default.js file contains the customer object that we want to bind. Notice that the customer object has a firstName, lastName, and birthday property. We will use our new shortDate() converter when displaying the customer birthday property: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { var customer = { firstName: "Fred", lastName: "Flintstone", birthday: new Date("12/1/1988") }; WinJS.Binding.processAll(null, customer); } }; app.start(); })(); We actually use our shortDate converter in the HTML document. The following HTML document displays all of the customer properties: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> <script type="text/javascript" src="js/converters.js"></script> </head> <body> <h1>Customer Details</h1> <div class="field"> First Name: <span data-win-bind="innerText:firstName"></span> </div> <div class="field"> Last Name: <span data-win-bind="innerText:lastName"></span> </div> <div class="field"> Birthday: <span data-win-bind="innerText:birthday MyApp.Converters.shortDate"></span> </div> </body> </html> Notice the data-win-bind attribute used to display the birthday property. It looks like this: <span data-win-bind="innerText:birthday MyApp.Converters.shortDate"></span> The shortDate converter is applied to the birthday property when the birthday property is bound to the SPAN element’s innerText property. Using data-win-bindsource Normally, you pass the view model (the data context) which you want to use with the data-win-bind attributes in a page by passing the view model to the WinJS.Binding.processAll() method like this: WinJS.Binding.processAll(null, viewModel); As an alternative, you can specify the view model declaratively in your markup by using the data-win-datasource attribute. For example, the following default.js script exposes a view model with the fully-qualified name of MyWinWebApp.viewModel: (function () { "use strict"; var app = WinJS.Application; app.onactivated = function (eventObject) { if (eventObject.detail.kind === Windows.ApplicationModel.Activation.ActivationKind.launch) { // Create view model var viewModel = { customer: { firstName: "Fred", lastName: "Flintstone" }, product: { name: "Bowling Ball", price: 12.99 } }; // Export view model to be seen by universe WinJS.Namespace.define("MyWinWebApp", { viewModel: viewModel }); // Process data-win-bind attributes WinJS.Binding.processAll(); } }; app.start(); })(); In the code above, a view model which represents a customer and a product is exposed as MyWinWebApp.viewModel. The following HTML page illustrates how you can use the data-win-bindsource attribute to bind to this view model: <!DOCTYPE html> <html> <head> <meta charset="utf-8"> <title>Application1</title> <!-- WinJS references --> <link href="//Microsoft.WinJS.0.6/css/ui-dark.css" rel="stylesheet"> <script src="//Microsoft.WinJS.0.6/js/base.js"></script> <script src="//Microsoft.WinJS.0.6/js/ui.js"></script> <!-- Application1 references --> <link href="/css/default.css" rel="stylesheet"> <script src="/js/default.js"></script> </head> <body> <h1>Customer Details</h1> <div data-win-bindsource="MyWinWebApp.viewModel.customer"> <div class="field"> First Name: <span data-win-bind="innerText:firstName"></span> </div> <div class="field"> Last Name: <span data-win-bind="innerText:lastName"></span> </div> </div> <h1>Product</h1> <div data-win-bindsource="MyWinWebApp.viewModel.product"> <div class="field"> Name: <span data-win-bind="innerText:name"></span> </div> <div class="field"> Price: <span data-win-bind="innerText:price"></span> </div> </div> </body> </html> The data-win-bindsource attribute is used twice in the page above: it is used with the DIV element which contains the customer details and it is used with the DIV element which contains the product details. If an element has a data-win-bindsource attribute then all of the child elements of that element are affected. The data-win-bind attributes of all of the child elements are bound to the data source represented by the data-win-bindsource attribute. Summary The focus of this blog entry was data binding using the WinJS library. You learned how to use the data-win-bind attribute to bind the properties of an HTML element to a view model. We also discussed several advanced features of data binding. We examined how to create calculated properties by including a property with a getter in your view model. We also discussed how you can create a converter function to format the value of a view model property when binding the property. Finally, you learned how to use the data-win-bindsource attribute to specify a view model declaratively.

  Read the article

• ESB Toolkit 2.0 EndPointConfig (HTTPS with WCF-BasicHttp and the ESB Toolkit 2.0)

  - by Andy Morrison

  Earlier this week I had an ESB endpoint (Off-Ramp in ESB parlance) that I was sending to over http using WCF-BasicHttp.  I needed to switch the protocol to https: which I did by changing my UDDI Binding over to https:  No problem from a management perspective; however, when I tried to run the process I saw this exception: Event Type:                     Error Event Source:                BizTalk Server 2009 Event Category:            BizTalk Server 2009 Event ID:   5754 Date:                                    3/10/2010 Time:                                   2:58:23 PM User:                                    N/A Computer:                       XXXXXXXXX Description: A message sent to adapter "WCF-BasicHttp" on send port "SPDynamic.XXX.SR" with URI "https://XXXXXXXXX.com/XXXXXXX/whatever.asmx" is suspended.  Error details: System.ArgumentException: The provided URI scheme 'https' is invalid; expected 'http'. Parameter name: via    at System.ServiceModel.Channels.TransportChannelFactory`1.ValidateScheme(Uri via)    at System.ServiceModel.Channels.HttpChannelFactory.ValidateCreateChannelParameters(EndpointAddress remoteAddress, Uri via)    at System.ServiceModel.Channels.HttpChannelFactory.OnCreateChannel(EndpointAddress remoteAddress, Uri via)    at System.ServiceModel.Channels.ChannelFactoryBase`1.InternalCreateChannel(EndpointAddress address, Uri via)    at System.ServiceModel.Channels.ChannelFactoryBase`1.CreateChannel(EndpointAddress address, Uri via)    at System.ServiceModel.Channels.ServiceChannelFactory.ServiceChannelFactoryOverRequest.CreateInnerChannelBinder(EndpointAddress to, Uri via)    at System.ServiceModel.Channels.ServiceChannelFactory.CreateServiceChannel(EndpointAddress address, Uri via)    at System.ServiceModel.Channels.ServiceChannelFactory.CreateChannel(Type channelType, EndpointAddress address, Uri via)    at System.ServiceModel.ChannelFactory`1.CreateChannel(EndpointAddress address, Uri via)    at System.ServiceModel.ChannelFactory`1.CreateChannel()    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.GetChannel[TChannel](IBaseMessage bizTalkMessage, ChannelFactory`1& cachedFactory)    at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.SendMessage(IBaseMessage bizTalkMessage)  MessageId:  {1170F4ED-550F-4F7E-B0E0-1EE92A25AB10}  InstanceID: {1640C6C6-CA9C-4746-AEB0-584FDF7BB61E} I knew from a previous experience that I likely needed to set the SecurityMode setting for my Send Port.  But how do you do this for a Dynamic port (which I was using since this is an ESB solution)? Within the UDDI portal you have to add an additional Instance Info to your Binding named: EndPointConfig  Then you have to set its value to:  SecurityMode=Transport Like this:    The EndPointConfig is how the ESB Toolkit 2.0 provides extensibility for the various transports.  To see what the key-value pair options are for a given transport, open up an itinerary and change one of your resolvers to a “static” resolver by setting the “Resolver Implementation” to Static.  Then select a “Transport Name” ”, for instance to WCF-BasicHttp.  At this point you can then click on the “EndPoint Configuration” property for to see an adapter/ramp specific properties dialog (key-value pairs.)    Here’s the dialog that popped up for WCF-BasicHttp:   I simply set the SecurityMode to Transport.  Please note that you will get different properties within the window depending on the Transport Name you select for the resolver. When you are done with your settings, export the itinerary to disk and find that xml; then find that resolver’s xml within that file.  It will look like endpointConfig=SecurityMode=Transport in this case.  Note that if you set additional properties you will have additional key-value pairs after endpointConfig= Copy that string and paste it into the UDDI portal for you Binding’s EndPointConfig Instance Info value.

  Read the article

• DHCP server with multiple interfaces on ubuntu, destroys default gateway

  - by Henrik Alstad

  I use Ubuntu, and I have many interfaces. eth0, which is my internet connection, and it gets its info from a DHCP-server totally outisde of my control. I then have eth1,eth2,eth3 and eth4 which I have created a DHCP-server for.(ISC DHCP-Server) It seems to work, and I even get an IP-address from the foreign DHCP-server on the internet facing interface. However, for some reason it seems my gateway for eth0 became screwed after I installed my local DHCP-server for eth1-eth4. (I think so because I got an IP for eth0, and I can ping other stuff on the local network, but I cannot get access to the internet). My eth0-specific info in /etc/network/interfaces: auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto eth1 iface eth1 inet static address 10.0.1.1 netmask 255.255.255.0 network 10.0.1.0 broadcast 10.0.1.255 gateway 10.0.1.1 mtu 8192 auto eth2 iface eth2 inet static address 10.0.2.1 netmask 255.255.255.0 network 10.0.2.0 broadcast 10.0.2.255 gateway 10.0.2.1 mtu 8192 My /etc/default/isc-dhcp-server: INTERFACES="eth1 eth2 eth3 eth4" So why does my local DHCP-server fuck up the gateway for eth0, when I tell it not to listen to eth0? Anyone see the problem or what I can do to fix it? The problem seems indeed to be the gateways. "netstat -nr" gives: 0.0.0.0 --- 10.X.X.X ---- 0.0.0.0 --- UG 0 0 0 eth3 It should have been 0.0.0.0 129.2XX.X.X 0.0.0.0 UG 0 0 0 eth0 So for some reason, my local DHCP-server overrides the gateway I get from the network DHCP. Edit: dhcp.conf looks like this(I included info only for eth1 subnet): ddns-update-style none; not authoritative; subnet 10.0.1.0 netmask 255.255.255.0 { interface eth1; option domain-name "example.org"; option domain-name-servers ns1.example.org, ns2.example.org; default-lease-time 600; max-lease-time 7200; range 10.0.1.10 10.0.1.100; host camera1_1 { hardware ethernet 00:30:53:11:24:6E; fixed-address 10.0.1.10; } host camera2_1 { hardware ethernet 00:30:53:10:16:70; fixed-address 10.0.1.11; } } Also, it seems that the gateway is correctly set if I run "/etc/init.d/networking restart" in a terminal, but that's not helpful for me, I need the correct gateway to be set during startup, and i'd rather find the source of the problem

  Read the article

• Canonicalization issue regarding academic URL vs. blog URL

  - by user5395

  I'm sorry if what I am about to write is long-winded. I only wish to be clear. I am an academic in the scientific community. I maintain a web site for my research, teaching, and other professional activities. Until recently, the content for this site was hosted in a directory on my university department's own server. The address is of the typical form (universityname).edu/~(myusername) I decided that I wanted to use WordPress in order to host and manage my page. So I set up a WordPress.com blog and then replaced the index.html file in (universityname).edu/~(myusername) with a new one consisting of a single frame, containing the WordPress.com blog. Now when a user visits (universityname).edu/~(myusername), he or she sees the blog instead. This has been pretty nice because, even when the user clicks on links between pages or posts in the blog, the only thing showing up in the address bar of the browser is www.(universityname).edu/~(myusername), because the blog is constrained to a frame. However, the effect of this change on the search side of things has not been so kind to me. Before, when someone searched for my name in Google, the first result was always (universityname).edu/~(myusername). This is the most desirable outcome, for professional reasons. (Having my academic URL come up first suggests that I am an accredited professional, and not just some crank with a blog!) But now, Google seems to have canonicalized my web presence under the blog's WordPress.com address. It has completely forgotten about my academic URL and considers the WordPress.com address to be the best address representing me on the web. Unfortunately, WordPress.com doesn't support the canonical tag, so I can't tell the blog to advertise itself as my academic URL in the header. (It doesn't seem to help at all that I have used the WordPress.com dashboard to turn on no-indexing of the blog.) One obvious solution would be to use the departmental server to host my content again, and use a local installation of the WordPress platform. For reasons beyond my control, the platform will not be deployed on the departmental server at this time. Another solution would be to use shared hosting with WordPress.org support, because the WordPress.org platform does support the canonical tag (albeit via a plug-in). But this seems to usually require purchasing a domain name and other fees, and there is no guarantee that Google will listen to the canonical tag (it might use whatever domain name I end up with instead). Is there a way I can more cleverly integrate the WordPress.com blog into a page hosted on my department's server? Is there some PHP code I can write to retrieve the blog's contents in a way that Google won't treat as a link / "perceive" the blog? Please note: I am a PHP novice at best. I just feel there should be a simpler solution to all this, within the constraints of what I have described above. Thanks!

  Read the article

• SQL: empty string vs NULL value

  - by Jacek Prucia

  I know this subject is a bit controversial and there are a lot of various articles/opinions floating around the internet. Unfortunatelly, most of them assume the person doesn't know what the difference between NULL and empty string is. So they tell stories about surprising results with joins/aggregates and generally do a bit more advanced SQL lessons. By doing this, they absolutely miss the whole point and are therefore useless for me. So hopefully this question and all answers will move subject a bit forward. Let's suppose I have a table with personal information (name, birth, etc) where one of the columns is an email address with varchar type. We assume that for some reason some people might not want to provide an email address. When inserting such data (without email) into the table, there are two available choices: set cell to NULL or set it to empty string (''). Let's assume that I'm aware of all the technical implications of choosing one solution over another and I can create correct SQL queries for either scenario. The problem is even when both values differ on the technical level, they are exactly the same on logical level. After looking at NULL and '' I came to a single conclusion: I don't know email address of the guy. Also no matter how hard i tried, I was not able to sent an e-mail using either NULL or empty string, so apparently most SMTP servers out there agree with my logic. So i tend to use NULL where i don't know the value and consider empty string a bad thing. After some intense discussions with colleagues i came with two questions: am I right in assuming that using empty string for an unknown value is causing a database to "lie" about the facts? To be more precise: using SQL's idea of what is value and what is not, I might come to conclusion: we have e-mail address, just by finding out it is not null. But then later on, when trying to send e-mail I'll come to contradictory conclusion: no, we don't have e-mail address, that @!#$ Database must have been lying! Is there any logical scenario in which an empty string '' could be such a good carrier of important information (besides value and no value), which would be troublesome/inefficient to store by any other way (like additional column). I've seen many posts claiming that sometimes it's good to use empty string along with real values and NULLs, but so far haven't seen a scenario that would be logical (in terms of SQL/DB design). P.S. Some people will be tempted to answer, that it is just a matter of personal taste. I don't agree. To me it is a design decision with important consequences. So i'd like to see answers where opion about this is backed by some logical and/or technical reasons.

  Read the article

• In-Store Tracking Gets a Little Harder

  - by David Dorf

  Remember how Nordstrom was tracking shopper movements within their stores using the unique number, called a MAC, emitted by the WiFi radio in smartphones?  The phones didn't need to connect to the network, only have their WiFi enabled, as most people do by default.  They did this, presumably, to track shoppers' path to purchase and better understand traffic patterns.  Although there were signs explaining this at the entrances, people didn't like the notion of being tracked.  (Nevermind that there are cameras in the ceiling watching them.)  Nordstrom stopped the program. To address this concern the Future of Privacy, a Washington think tank, created Smart Store Privacy, a do-not-track service that allows consumers to register their MAC address in much the same way people register their phone numbers in the national do-not-call list.  A group of companies agreed to respect consumers' wishes and ignore smartphones listed in the database.  The database includes Bluetooth identifiers as well.  Of course you could simply turn your bluetooth and WiFi off when shopping as well. Most know that Apple prefers to use BLE beacons to contact and track smartphones within their stores.  This feature extends the typical online experience to also work in physical stores.  By identifying themselves, shoppers can expect a more tailored shopping experience much like what we've come to expect from Amazon's website, with product recommendations and offers that are (usually) relevant. But the upcoming release of iOS8 is purported to have a new feature that randomizes the WiFi MAC address of smartphones during the "probing" phase.  That is, before connecting to the WiFi network, a random MAC number is used so as to keep the smartphone's real MAC address secret.  Unless you actually connect to the store's WiFi, they won't recognize the MAC address. The details on this are still sketchy, but if the random MAC is consistent for a short period, retailers will still be able to track movements anonymously, but they won't recognize repeat visitors.  That may be sufficient for traffic analytics, but it will stymie target marketing.  In the case of marketing, using iBeacons with opt-in permission from consumers will be the way forward. There is always a battle between utility and privacy, so I expect many more changes in this area.  Incidentally, if you'd like to see where beacons are being used this site tracks them around the world.

  Read the article

• Code Complete 2ed, composition and delegation.

  - by Arlukin

  Hi there. After a couple of weeks reading on this forum I thought it was time for me to do my first post. I'm currently rereading Code Complete. I think it's 15 years since the last time, and I find that I still can't write code ;-) Anyway on page 138 in Code Complete you find this coding horror example. (I have removed some of the code) class Emplyee { public: FullName GetName() const; Address GetAddress() const; PhoneNumber GetWorkPhone() const; ... bool IsZipCodeValid( Address address); ... private: ... } What Steve thinks is bad is that the functions are loosely related. Or has he writes "There's no logical connection between employees and routines that check ZIP codes, phone numbers or job classifications" Ok I totally agree with him. Maybe something like the below example is better. class ZipCode { public: bool IsValid() const; ... } class Address { public: ZipCode GetZipCode() const; ... } class Employee { public: Address GetAddress() const; ... } When checking if the zip is valid you would need to do something like this. employee.GetAddress().GetZipCode().IsValid(); And that is not good regarding to the Law of Demeter ([http://en.wikipedia.org/wiki/Law_of_Demeter][1]). So if you like to remove two of the three dots, you need to use delegation and a couple of wrapper functions like this. class ZipCode { public: bool IsValid(); } class Address { public: ZipCode GetZipCode() const; bool IsZipCodeValid() {return GetZipCode()->IsValid()); } class Employee { public: FullName GetName() const; Address GetAddress() const; bool IsZipCodeValid() {return GetAddress()->IsZipCodeValid()); PhoneNumber GetWorkPhone() const; } employee.IsZipCodeValid(); But then again you have routines that has no logical connection. I personally think that all three examples in this post are bad. Is it some other way that I haven't thougt about? //Daniel

  Read the article

• jquery addresses and live method

  - by Jay

  //deep linking $.fn.ajaxAnim = function() { $(this).animW(); $(this).html('<div class="load-prog">loading...</div>'); } $("document").ready(function(){ contM = $('#main-content'); contS = $('#second-content'); $(contM).hide(); $(contM).addClass('hidden'); $(contS).hide(); $(contS).addClass('hidden'); function loadURL(URL) { //console.log("loadURL: " + URL); $.ajax({ url: URL, beforeSend: function(){$(contM).ajaxAnim();}, type: "POST", dataType: 'html', data: {post_loader: 1}, success: function(data){ $(contM).html(data); $('.post-content').initializeScroll(); } }); } // Event handlers $.address.init(function(event) { //console.log("init: " + $('[rel=address:' + event.value + ']').attr('href')); }).change(function(event) { evVal = event.value; if(evVal == '/'){return false;} else{ $.ajax({ url: $('[rel=address:' + evVal + ']').attr('href'), beforeSend: function(){$(contM).ajaxAnim();}, type: "POST", dataType: 'html', data: {post_loader: 1}, success: function(data){ $(contM).html(data); $('.post-content').initializeScroll(); }}); } //console.log("change"); }) $('.update-main a, a.update-main').live('click', function(){ loadURL($(this).attr('href')); return false; }); $(".update-second a, a.update-second").live('click', function() { var link = $(this); $.ajax({ url: link.attr("href"), beforeSend: function(){$(contS).ajaxAnim();}, type: "POST", dataType: 'html', data: {post_loader: 1}, success: function(data){ $(contS).html(data); $('.post-content').initializeScroll(); }}); return false; }); }); I'm using jquery addresses to update content while maintaining a useful url. When clicking on links in a main nav, the url is updated properly, but when links are loaded dynamically with ajax, the url address function breaks. I have made 'click' events live, allowing for content to be loaded via dynamically loaded links, but I can't seem to make the address event listener live, but this seems to be the only way to make this work. Is my syntax wrong if I change this : $.address.change(function(event) { to this: $.address.live('change', function(event) { or does the live method not work with this plugin?

  Read the article

• INSERT OR IGNORE in a trigger

  - by dan04

  I have a database (for tracking email statistics) that has grown to hundreds of megabytes, and I've been looking for ways to reduce it. It seems that the main reason for the large file size is that the same strings tend to be repeated in thousands of rows. To avoid this problem, I plan to create another table for a string pool, like so: CREATE TABLE AddressLookup ( ID INTEGER PRIMARY KEY AUTOINCREMENT, Address TEXT UNIQUE ); CREATE TABLE EmailInfo ( MessageID INTEGER PRIMARY KEY AUTOINCREMENT, ToAddrRef INTEGER REFERENCES AddressLookup(ID), FromAddrRef INTEGER REFERENCES AddressLookup(ID) /* Additional columns omitted for brevity. */ ); And for convenience, a view to join these tables: CREATE VIEW EmailView AS SELECT MessageID, A1.Address AS ToAddr, A2.Address AS FromAddr FROM EmailInfo LEFT JOIN AddressLookup A1 ON (ToAddrRef = A1.ID) LEFT JOIN AddressLookup A2 ON (FromAddrRef = A2.ID); In order to be able to use this view as if it were a regular table, I've made some triggers: CREATE TRIGGER trg_id_EmailView INSTEAD OF DELETE ON EmailView BEGIN DELETE FROM EmailInfo WHERE MessageID = OLD.MessageID; END; CREATE TRIGGER trg_ii_EmailView INSTEAD OF INSERT ON EmailView BEGIN INSERT OR IGNORE INTO AddressLookup(Address) VALUES (NEW.ToAddr); INSERT OR IGNORE INTO AddressLookup(Address) VALUES (NEW.FromAddr); INSERT INTO EmailInfo SELECT NEW.MessageID, A1.ID, A2.ID FROM AddressLookup A1, AddressLookup A2 WHERE A1.Address = NEW.ToAddr AND A2.Address = NEW.FromAddr; END; CREATE TRIGGER trg_iu_EmailView INSTEAD OF UPDATE ON EmailView BEGIN UPDATE EmailInfo SET MessageID = NEW.MessageID WHERE MessageID = OLD.MessageID; REPLACE INTO EmailView SELECT NEW.MessageID, NEW.ToAddr, NEW.FromAddr; END; The problem After: INSERT OR REPLACE INTO EmailView VALUES (1, '[email protected]', '[email protected]'); INSERT OR REPLACE INTO EmailView VALUES (2, '[email protected]', '[email protected]'); The updated rows contain: MessageID ToAddr FromAddr --------- ------ -------- 1 NULL [email protected] 2 [email protected] [email protected] There's a NULL that shouldn't be there. The corresponding cell in the EmailInfo table contains an orphaned ToAddrRef value. If you do the INSERTs one at a time, you'll see that Alice's ID in the AddressLookup table changes! It appears that this behavior is documented: An ON CONFLICT clause may be specified as part of an UPDATE or INSERT action within the body of the trigger. However if an ON CONFLICT clause is specified as part of the statement causing the trigger to fire, then conflict handling policy of the outer statement is used instead. So the "REPLACE" in the top-level "INSERT OR REPLACE" statement is overriding the critical "INSERT OR IGNORE" in the trigger program. Is there a way I can make it work the way that I wanted?

  Read the article

• jQuery, ASP.NET, and Browser History

  - by Stephen Walther

  One objection that people always raise against Ajax applications concerns browser history. Because an Ajax application updates its content by performing sneaky Ajax postbacks, the browser backwards and forwards buttons don’t work as you would normally expect. In a normal, non-Ajax application, when you click the browser back button, you return to a previous state of the application. For example, if you are paging through a set of movie records, you might return to the previous page of records. In an Ajax application, on the other hand, the browser backwards and forwards buttons do not work as you would expect. If you navigate to the second page in a list of records and click the backwards button, you won’t return to the previous page. Most likely, you will end up navigating away from the application entirely (which is very unexpected and irritating). Bookmarking presents a similar problem. You cannot bookmark a particular page of records in an Ajax application because the address bar does not reflect the state of the application. The Ajax Solution There is a solution to both of these problems. To solve both of these problems, you must take matters into your own hands and take responsibility for saving and restoring your application state yourself. Furthermore, you must ensure that the address bar gets updated to reflect the state of your application. In this blog entry, I demonstrate how you can take advantage of a jQuery library named bbq that enables you to control browser history (and make your Ajax application bookmarkable) in a cross-browser compatible way. The JavaScript Libraries In this blog entry, I take advantage of the following four JavaScript files: jQuery-1.4.2.js – The jQuery library. Available from the Microsoft Ajax CDN at http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js jquery.pager.js – Used to generate pager for navigating records. Available from http://plugins.jquery.com/project/Pager microtemplates.js – John Resig’s micro-templating library. Available from http://ejohn.org/blog/javascript-micro-templating/ jquery.ba-bbq.js – The Back Button and Query (BBQ) Library. Available from http://benalman.com/projects/jquery-bbq-plugin/ All of these libraries, with the exception of the Micro-templating library, are available under the MIT open-source license. The Ajax Application Let’s start by building a simple Ajax application that enables you to page through a set of movie database records, 3 records at a time. We’ll use my favorite database named MoviesDB. This database contains a Movies table that looks like this: We’ll create a data model for this database by taking advantage of the ADO.NET Entity Framework. The data model looks like this: Finally, we’ll expose the data to the universe with the help of a WCF Data Service named MovieService.svc. The code for the data service is contained in Listing 1. Listing 1 – MovieService.svc using System.Data.Services; using System.Data.Services.Common; namespace WebApplication1 { public class MovieService : DataService<MoviesDBEntities> { public static void InitializeService(DataServiceConfiguration config) { config.SetEntitySetAccessRule("Movies", EntitySetRights.AllRead); config.DataServiceBehavior.MaxProtocolVersion = DataServiceProtocolVersion.V2; } } } The WCF Data Service in Listing 1 exposes the movies so that you can query the movie database table with URLs that looks like this: http://localhost:2474/MovieService.svc/Movies -- Returns all movies http://localhost:2474/MovieService.svc/Movies?$top=5 – Returns 5 movies The HTML page in Listing 2 enables you to page through the set of movies retrieved from the WCF Data Service. Listing 2 – Original.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Movies with History</title> <link href="Design/Pager.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Page <span id="pageNumber"></span> of <span id="pageCount"></span></h1> <div id="pager"></div> <br style="clear:both" /><br /> <div id="moviesContainer"></div> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> <script src="App_Scripts/jquery.pager.js" type="text/javascript"></script> <script type="text/javascript"> var pageSize = 3, pageIndex = 0; // Show initial page of movies showMovies(); function showMovies() { // Build OData query var query = "/MovieService.svc" // base URL + "/Movies" // top-level resource + "?$skip=" + pageIndex * pageSize // skip records + "&$top=" + pageSize // take records + " &$inlinecount=allpages"; // include total count of movies // Make call to WCF Data Service $.ajax({ dataType: "json", url: query, success: showMoviesComplete }); } function showMoviesComplete(result) { // unwrap results var movies = result["d"]["results"]; var movieCount = result["d"]["__count"] // Show movies using template var showMovie = tmpl("<li><%=Id%> - <%=Title %></li>"); var html = ""; for (var i = 0; i < movies.length; i++) { html += showMovie(movies[i]); } $("#moviesContainer").html(html); // show pager $("#pager").pager({ pagenumber: (pageIndex + 1), pagecount: Math.ceil(movieCount / pageSize), buttonClickCallback: selectPage }); // Update page number and page count $("#pageNumber").text(pageIndex + 1); $("#pageCount").text(movieCount); } function selectPage(pageNumber) { pageIndex = pageNumber - 1; showMovies(); } </script> </body> </html> The page in Listing 3 has the following three functions: showMovies() – Performs an Ajax call against the WCF Data Service to retrieve a page of movies. showMoviesComplete() – When the Ajax call completes successfully, this function displays the movies by using a template. This function also renders the pager user interface. selectPage() – When you select a particular page by clicking on a page number in the pager UI, this function updates the current page index and calls the showMovies() function. Figure 1 illustrates what the page looks like when it is opened in a browser. Figure 1 If you click the page numbers then the browser history is not updated. Clicking the browser forward and backwards buttons won’t move you back and forth in browser history. Furthermore, the address displayed in the address bar does not change when you navigate to different pages. You cannot bookmark any page except for the first page. Adding Browser History The Back Button and Query (bbq) library enables you to add support for browser history and bookmarking to a jQuery application. The bbq library supports two important methods: jQuery.bbq.pushState(object) – Adds state to browser history. jQuery.bbq.getState(key) – Gets state from browser history. The bbq library also supports one important event: hashchange – This event is raised when the part of an address after the hash # is changed. The page in Listing 3 demonstrates how to use the bbq library to add support for browser navigation and bookmarking to an Ajax page. Listing 3 – Default.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Movies with History</title> <link href="Design/Pager.css" rel="stylesheet" type="text/css" /> </head> <body> <h1>Page <span id="pageNumber"></span> of <span id="pageCount"></span></h1> <div id="pager"></div> <br style="clear:both" /><br /> <div id="moviesContainer"></div> <script src="http://ajax.microsoft.com/ajax/jquery/jquery-1.4.2.js" type="text/javascript"></script> <script src="App_Scripts/jquery.ba-bbq.js" type="text/javascript"></script> <script src="App_Scripts/Microtemplates.js" type="text/javascript"></script> <script src="App_Scripts/jquery.pager.js" type="text/javascript"></script> <script type="text/javascript"> var pageSize = 3, pageIndex = 0; $(window).bind('hashchange', function (e) { pageIndex = e.getState("pageIndex") || 0; pageIndex = parseInt(pageIndex); showMovies(); }); $(window).trigger('hashchange'); function showMovies() { // Build OData query var query = "/MovieService.svc" // base URL + "/Movies" // top-level resource + "?$skip=" + pageIndex * pageSize // skip records + "&$top=" + pageSize // take records +" &$inlinecount=allpages"; // include total count of movies // Make call to WCF Data Service $.ajax({ dataType: "json", url: query, success: showMoviesComplete }); } function showMoviesComplete(result) { // unwrap results var movies = result["d"]["results"]; var movieCount = result["d"]["__count"] // Show movies using template var showMovie = tmpl("<li><%=Id%> - <%=Title %></li>"); var html = ""; for (var i = 0; i < movies.length; i++) { html += showMovie(movies[i]); } $("#moviesContainer").html(html); // show pager $("#pager").pager({ pagenumber: (pageIndex + 1), pagecount: Math.ceil(movieCount / pageSize), buttonClickCallback: selectPage }); // Update page number and page count $("#pageNumber").text(pageIndex + 1); $("#pageCount").text(movieCount); } function selectPage(pageNumber) { pageIndex = pageNumber - 1; $.bbq.pushState({ pageIndex: pageIndex }); } </script> </body> </html> Notice the first chunk of JavaScript code in Listing 3: $(window).bind('hashchange', function (e) { pageIndex = e.getState("pageIndex") || 0; pageIndex = parseInt(pageIndex); showMovies(); }); $(window).trigger('hashchange'); When the hashchange event occurs, the current pageIndex is retrieved by calling the e.getState() method. The value is returned as a string and the value is cast to an integer by calling the JavaScript parseInt() function. Next, the showMovies() method is called to display the page of movies. The $(window).trigger() method is called to raise the hashchange event so that the initial page of records will be displayed. When you click a page number, the selectPage() method is invoked. This method adds the current page index to the address by calling the following method: $.bbq.pushState({ pageIndex: pageIndex }); For example, if you click on page number 2 then page index 1 is saved to the URL. The URL looks like this: Notice that when you click on page 2 then the browser address is updated to look like: /Default.htm#pageIndex=1 If you click on page 3 then the browser address is updated to look like: /Default.htm#pageIndex=2 Because the browser address is updated when you navigate to a new page number, the browser backwards and forwards button will work to navigate you backwards and forwards through the page numbers. When you click page 2, and click the backwards button, you will navigate back to page 1. Furthermore, you can bookmark a particular page of records. For example, if you bookmark the URL /Default.htm#pageIndex=1 then you will get the second page of records whenever you open the bookmark. Summary You should not avoid building Ajax applications because of worries concerning browser history or bookmarks. By taking advantage of a JavaScript library such as the bbq library, you can make your Ajax applications behave in exactly the same way as a normal web application.

  Read the article

• How to set up email alias in exchange 2010

  - by Rothgar

  I have a couple users who need multiple email addresses (alias) forwarded to their accounts but setting up a separate user and forwarding the email is showing the email to the users main address instead of the aliased email. For example, here is what I need: [email protected] is the users email address but they also need to receive emails sent to [email protected], and [email protected]. When the emails are sent to the other two email addresses I want them to be forwarded to the user and showing that it was sent to the redundancy email address and not john.doe because the user needs to be able to filter these emails as well as reply from the redundancy department email address. How can I set up alias' in exchange 2010 to work this way? Thanks

  Read the article

• How to run VisualSVN Server on port 443 running IIS on same server?

  - by Metro Smurf

  Server 2008 R2 SP1 VisualSVN Server 2.1.6 The IIS server has about 10 sites. One of them uses https over port 443 with the following bindings: http x.x.x.39:80 site.com http x.x.x.39:80 www.site.com https x.x.x.39:443 VisualSVN Server Properties server name: svn.SomeSite.com server port: 443 Server Binding: x.x.x.40 No sites on IIS are listening to x.x.x.40. When starting up VisualSVN server, the following errors are thrown: make_sock: could not bind to address x.x.x.40:443 (OS 10013) An attempt was made to access a socket in a way forbidden by its access permissions. no listening sockets available, shutting down When I stop Site.com on IIS, then VisualSVN Server starts up without a problem. When I bind VisualSVN server to port 8443 and start Site.com, then VisualSVN Server starts without a problem. My goal is to be able to access the VisualSvn Server with a normal url, i.e., one that does't use a port number in the address: https://svn.site.com vs https://svn.site.com:8443 What needs to be configured to allow VisualSVN Server to run on port 443 with IIS running on the same server? Edit / Answer The answer provided by Ivan did point me in the right direction. For anyone else running into this, here is a bit more information. Even though my IIS had no bindings set to the IP address I am using for VisualSvn, IIS will still take the IP address hostage unless IIS is explicitly told which IP addresses to listen to. There is no GUI in Win Server 2k8 to configure the IP addresses for IIS to listen; by default, IIS listens to all IP addresses assigned to the server. The following will help configure IIS to only listen to the IP addresses you want: open a command prompt enter: netsh enter: http enter: show iplisten -- this will show a table of the IP addresses IIS is listening to. By default, the table will be empty (I guess this means IIS listens to all IP's) For each IP address IIS should listen to, enter: add iplisten ipaddress=x.x.x.x enter: show iplisten -- you should now see all the IP addresses added to the listening table. Exit and then reset IIS. Each of these commands can also be run directly, i.e., netsh http show iplisten If you need to delete an IP address from the listening table: open a command prompt enter: netsh enter: http enter: delete iplisten ipaddress=x.x.x.x Exit and then reset IIS.

  Read the article

• Cisco ASA 5505 - L2TP over IPsec

  - by xraminx

  I have followed this document on cisco site to set up the L2TP over IPsec connection. When I try to establish a VPN to ASA 5505 from my Windows XP, after I click on "connect" button, the "Connecting ...." dialog box appears and after a while I get this error message: Error 800: Unable to establish VPN connection. The VPN server may be unreachable, or security parameters may not be configured properly for this connection. ASA version 7.2(4) ASDM version 5.2(4) Windows XP SP3 Windows XP and ASA 5505 are on the same LAN for test purposes. Edit 1: There are two VLANs defined on the cisco device (the standard setup on cisco ASA5505). - port 0 is on VLAN2, outside; - and ports 1 to 7 on VLAN1, inside. I run a cable from my linksys home router (10.50.10.1) to the cisco ASA5505 router on port 0 (outside). Port 0 have IP 192.168.1.1 used internally by cisco and I have also assigned the external IP 10.50.10.206 to port 0 (outside). I run a cable from Windows XP to Cisco router on port 1 (inside). Port 1 is assigned an IP from Cisco router 192.168.1.2. The Windows XP is also connected to my linksys home router via wireless (10.50.10.141). Edit 2: When I try to establish vpn, the Cisco device real time Log viewer shows 7 entries like this: Severity:5 Date:Sep 15 2009 Time: 14:51:29 SyslogID: 713904 Destination IP = 10.50.10.141, Decription: No crypto map bound to interface... dropping pkt Edit 3: This is the setup on the router right now. Result of the command: "show run" : Saved : ASA Version 7.2(4) ! hostname ciscoasa domain-name default.domain.invalid enable password HGFHGFGHFHGHGFHGF encrypted passwd NMMNMNMNMNMNMN encrypted names name 192.168.1.200 WebServer1 name 10.50.10.206 external-ip-address ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address external-ip-address 255.0.0.0 ! interface Vlan3 no nameif security-level 50 no ip address ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive dns server-group DefaultDNS domain-name default.domain.invalid object-group service l2tp udp port-object eq 1701 access-list outside_access_in remark Allow incoming tcp/http access-list outside_access_in extended permit tcp any host WebServer1 eq www access-list outside_access_in extended permit udp any any eq 1701 access-list inside_nat0_outbound extended permit ip any 192.168.1.208 255.255.255.240 access-list inside_cryptomap_1 extended permit ip interface outside interface inside pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool PPTP-VPN 192.168.1.210-192.168.1.220 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-524.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface www WebServer1 www netmask 255.255.255.255 access-group outside_access_in in interface outside timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute http server enable http 192.168.1.0 255.255.255.0 inside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set TRANS_ESP_3DES_SHA esp-3des esp-sha-hmac crypto ipsec transform-set TRANS_ESP_3DES_SHA mode transport crypto ipsec transform-set TRANS_ESP_3DES_MD5 esp-3des esp-md5-hmac crypto ipsec transform-set TRANS_ESP_3DES_MD5 mode transport crypto map outside_map 1 match address inside_cryptomap_1 crypto map outside_map 1 set transform-set TRANS_ESP_3DES_MD5 crypto map outside_map interface inside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash md5 group 2 lifetime 86400 telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd enable inside ! group-policy DefaultRAGroup internal group-policy DefaultRAGroup attributes dns-server value 192.168.1.1 vpn-tunnel-protocol IPSec l2tp-ipsec username myusername password FGHFGHFHGFHGFGFHF nt-encrypted tunnel-group DefaultRAGroup general-attributes address-pool PPTP-VPN default-group-policy DefaultRAGroup tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key * tunnel-group DefaultRAGroup ppp-attributes no authentication chap authentication ms-chap-v2 ! ! prompt hostname context Cryptochecksum:a9331e84064f27e6220a8667bf5076c1 : end

  Read the article

• OSS4 on Debian Squeeze

  - by mit

  Hi, I am trying to get OSS4 to work on a Debian Squeeze 64 bit machine with an usb sound adapter. There is no sound from this adapter at the present, although it worked just before on the previous installation. You can see the output of some commands here: $ sudo /etc/init.d/oss4-base restart Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. Starting Open Sound System: done (OSS is already loaded). $ sudo /etc/init.d/oss4-base stop Stopping Open Sound System: SNDCTL_MIX_EXTINFO: No such device or address done. $ sudo /etc/init.d/oss4-base start Starting Open Sound System: done (OSS is already loaded). $ ossinfo Version info: OSS 4.2 (b 2002/201001250441) (0x00040100) GPL Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 (pc11) Number of audio devices: 2 Number of audio engines: 2 Number of MIDI devices: 0 Number of mixer devices: 2 Device objects 0: osscore0 OSS core services 1: oss_hdaudio0 ATI HD Audio interrupts=0 (613) HD Audio controller ATI HD Audio Vendor ID 0x10024383 Subvendor ID 0x10192816 Codec 0: Not present 2: oss_usb0 USB audio core services 3: usb0d8c0126-0 USB sound device 4: usb0d8c0126-1 USB sound device 5: usb0d8c0126-2 USB sound device 6: usb0d8c0126-3 USB sound device MIDI devices (/dev/midi*) Mixer devices 0: (USB sound device )(Mixer 0 of device object 3) 1: USB sound device (Mixer 0 of device object 5) Audio devices (USB sound device play /dev/oss/usb0d8c0126-1/pcm0 ) (device index 0) USB sound device play /dev/oss/usb0d8c0126-3/pcm0 (device index 1) Nodes /dev/dsp -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_out -> /dev/oss/usb0d8c0126-1/pcm0 /dev/dsp_mmap -> /dev/oss/usb0d8c0126-1/pcm0 $ osstest Sound subsystem and version: OSS 4.2 (b 2002/201001250441) (0x00040100) Platform: Linux/x86_64 2.6.32-5-xen-amd64 #1 SMP Fri Dec 10 17:41:50 UTC 2010 *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-1/pcm0 (audio engine 0): USB sound device play - Device not present - Skipping *** Scanning sound adapter #-1 *** /dev/oss/usb0d8c0126-3/pcm0 (audio engine 1): USB sound device play - Performing audio playback test... /dev/oss/usb0d8c0126-3/pcm0: No such file or directory Can't open the device *** Some errors were detected during the tests *** $ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened $ ossmix SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -a SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossmix -D SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ ossmix -D 0 SNDCTL_MIX_EXTINFO: No such device or address ad@pc11:~$ man ossmix ad@pc11:~$ ossxmix /dev/oss/usb0d8c0126-2/mix0: No such file or directory No mixers could be opened How can I make oss sound work? I can add more information if necessary.

  Read the article

• Several IPs for my VPS

  - by Serafim

  I bought vps on santrex.net but can't receive any reply from support. My Problem: I have 5 ip but it pings only 1!!! I can't setup DNS because I need 2 ip minimum . Could you help me to activate other my IPs? root@spnova:~# ifconfig eth0 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.100 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163342 errors:0 dropped:0 overruns:0 frame:0 TX packets:13585 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32862185 (32.8 MB) TX bytes:15189036 (15.1 MB) eth0:0 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.101 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.102 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:2 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.103 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:3 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.104 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:11885 errors:0 dropped:0 overruns:0 frame:0 TX packets:11885 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8124693 (8.1 MB) TX bytes:8124693 (8.1 MB) root@spnova:~# nano /etc/network/interfaces # Auto generated eth0 interfaces auto eth0 lo iface eth0 inet static address 188.72.240.100 netmask 255.255.255.0 up route add -net 188.72.225.0 netmask 255.255.255.0 dev eth0 up route add default gw 188.72.225.1 iface lo inet loopback auto eth0:0 iface eth0:0 inet static address 188.72.240.101 netmask 255.255.255.0 auto eth0:1 iface eth0:1 inet static address 188.72.240.102 netmask 255.255.255.0 auto eth0:2 iface eth0:2 inet static address 188.72.240.103 netmask 255.255.255.0 auto eth0:3 iface eth0:3 inet static address 188.72.240.104 netmask 255.255.255.0

  Read the article

• Apache2 can't close connections with restart

  - by Theta

  I'm running a Debian webserver with Apache2 and the restart command started giving me an error. root@srv:~# service apache2 stop Stopping web server: apache2. root@srv:~# service apache2 start Starting web server: apache2(98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs Action 'start' failed. The Apache error log may have more information. failed! Occasionally it actually will restart without a problem but usually I have to killall -9 apache2 first. Someone on the Debian IRC had me check my active apache2 connections and it turns out they aren't quitting and dozens of them are staying open. How can I get these to eventually time out?

  Read the article

• Creating static NAT blocks outbound traffic Cisco ASA

  - by natediggs

  Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

  Read the article

• Issue configuring Oracle database for SSL

  - by Santhosha Kaldambe

  Hello, I want to setup Oracle for SSL communication. I am not using SSL authentication for database user. As first requirement, generated self signed certificate using OpenSSL and added certificate to wallet. The wallet location is specified in server configuration. Created listener and it is starting however it does not provide any service. The default listener (non SSL) is working fine. When I execute LSNRCTL.EXE status SSLLISTENER it gives below output. STATUS of the LISTENER Alias SSLLISTENER Version TNSLSNR for 32-bit Windows: Version 11.1.0.6.0 - Production Start Date 14-NOV-2009 01:47:08 Uptime 16 days 22 hr. 14 min. 3 sec Trace Level off Security ON: Local OS Authentication SNMP OFF Listener Parameter File C:\app\Administrator\product\11.1.0\db_1\network\admin\listener.ora Listener Log File c:\app\administrator\diag\tnslsnr\\ssllistener\alert\log.xml Listening Endpoints Summary... (DESCRIPTION=(ADDRESS=(PROTOCOL=tcps)(HOST=)(PORT =2484))) The listener supports no services The command completed successfully Here is exact content of various files after configuration. 1) File Name: tnsnames.ora ORCL = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl) ) ) 2) File Name: sqlnet.ora SSL_VERSION = 0 NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT) sqlnet.authentication_services= (NONE) tcp.validnode_checking = no tcp.invited_nodes=(PS0803.oraebs.com,PS2948,PS5098) SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) 3) File Name: listener.ora SSL_CLIENT_AUTHENTICATION = FALSE WALLET_LOCATION = (SOURCE = (METHOD = FILE) (METHOD_DATA = (DIRECTORY = C:\app\Administrator\admin\orcl\Server_Wallet) ) ) LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = )(PORT 1521)) ) ) SSLLISTENER = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCPS)(HOST = )(PORT = 2484)) ) Thanks Santhosh

  Read the article

• PXE boot and DHCP server configuration Failing Auto Installation

  - by Harihara Vinayakaram

  I have a ISC DHCP Server installed on Ubuntu 9.10 . I have managed to successfully boot a PXE client , obtain a DHCP address and load the initrd.gz file. But I am facing a vague problem when the debian installer starts up and tries to get a DHCP server The client send a DHCP request and I verified that is the same MAC Address. But I get a DHCP DECLINE (The client declines the address ). It offers all the address in the pool and then there is a DHCP NAK (no more free leases ) I tried using the Option no-ping, and also option one-client-one-lease but it does not help . If I set the client to use a fixed-address then the above problem is not there and the installation proceeds smoothly Can you give me any clues on what should be the DHCP server configuration My dhcpd.conf looks like this { ddns-update-style none; option domain-name "hadoop-myorg.org"; option domain-name-servers 192.168.3.5; default-lease-time 600; max-lease-time 7200; group { filename "pxelinux.0"; next-server 192.168.13.184; host hadoop1 { hardware ethernet 90:e6:ba:d5:53:f8; } } subnet 192.168.13.0 netmask 255.255.255.0 { option routers 10.0.0.254; pool { option domain-name-servers 192.168.3.5; max-lease-time 3000; range 192.168.13.55 192.168.13.65; deny unknown-clients; } } }

  Read the article

• Nginx + uWSGI on a fresh Ubuntu install - bind error port 80

  - by knuckfubuck

  I know this is a common problem usually having to do with apache or another service already running on port 80 and I have done a lot of searching and running netstat and still have not figured out why I am getting this error. I rebuilt my slice, did a fresh install of Ubuntu 10.04 and setup nginx + uwsgi. It worked and I was able to see my Django site. I then installed Postgres8.4 and the rest of the stack needed for Geodjango from this link. After that was done I tried to restart nginx and I get this error: sudo /etc/init.d/nginx start Starting nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok configuration file /usr/local/nginx/conf/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: still could not bind() I have nginx set to listen 80. Here's an output from netstat -l --numeric-ports | grep 80: tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:8000 0.0.0.0:* LISTEN Output from sudo lsof +M -i4: nginx 2330 root 8u IPv4 3195 0t0 TCP *:www (LISTEN) nginx 2331 www-data 8u IPv4 3195 0t0 TCP *:www (LISTEN) uwsgi 2335 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2352 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2353 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2354 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) uwsgi 2355 s 4u IPv4 3259 0t0 TCP localhost:8000 (LISTEN) Anyone have any other ideas how I can figure out what is blocking port 80? edit Paste of my /etc/init.d/nginx script here: http://dpaste.com/hold/400937/

  Read the article

• Begin the Clone Wars Have!

  - by Antony Reynolds

  Creating a New Virtual Machine from an Existing Virtual Disk In previous posts I described how I set up an OEL6 machine under VirtualBox that can run an 11gR2 database and FMW 11.1.1.5.  That is great if you want the DB and FMW running in the same virtual image and it has served me well for some proof of concepts and also for some testing of different JVMs.  However I also wanted to run some testing of FMW with the database running on a separate physical machine.  So in this post I will show how to take a VirtualBox image and create a new image based on the disks from that original image. What are my Options? There is more than one way to skin a cat, or in this case to create two separate VMs that can run on different hardware.  Some of the options include: Create new virtual disk images for each new VM. Clone the existing disk images and point the new VM at the cloned images. Point the new VM at the existing snapshots. #1 is too much like hard work, install OEL twice, install a database again, install FMW again, run RCU again!  Life is too short! #2 is probably the safest way of doing things.  VirtualBox allows you to clone a disk image for use in a separate machine.  However this of course duplicates the disk and means that it is now occupying 3 times the space, once for the original disk and twice more for the two clones I would need. #3 is the most space efficient way of doing things.  It does mean however that I can only run the new “cloned” images if I have access to the original image because that is where the base snapshots reside.  However this is not a problem for me as long as I remember to keep all threee images together.  So this is the approach we will follow. Snapshot, What Snapshot? As we are going to create new virtual machines based on existing snapshots we need to figure out which snapshot to use.  We do this by opening the “Media Manager” from within VirtualBox and moving the mouse over the snapshot images until we find the snapshots we want – the snapshot name is identified in the “Attached to:” comment.  In my case I wanted the FMW installed snapshot because that had a database configured for FMW alongside the FMW software.  I made a note of the filename of that snapshot (actually I just noted the first 5 characters as that was all that was needed to uniquely identify the snapshot file). When we create the new machines we will point them at the snapshot filename we have just checked. Network or NotWork? Because we want the two new machines to communicate with each other when hosted in different physical machines we can’t use the default NAT networking mode without a lot of hassle.  But at the same time we need them to have fixed IP addresses relative to each other so that they can see each other whilst also being able to see the outside world. To achieve all these requirements I created two network adapters for each machine.  Adapter 1 was a standard NAT mapping.  This will allow each machine to get a dynamic IP address (10.0.2.15 by default) that can be used to access the external world through the VBox provided NAT gateway.  This is the same as the existing configuration. The second adapter I created as a bridged adapter.  This gives the virtual machine direct access to the host network card and by using fixed IP addresses each machine can see the other.  It is important to choose fixed IP addresses that are not routable across your internal network so you don’t get any clashes with other machines on your network.  Of course you could always get proper fixed IP addresses from your network people, but I have serveral people using my images and as long as I don’t have two instances of the same VM on the same network segment this is easier and avoids reconfiguring the network every time someone wants a copy of my VM.  If it is available I would suggest using the 10.0.3.* network as 10.0.2.* is the default NAT network.  You can check availability by pinging 10.0.3.1 and 10.0.3.2 from your host machine.  If it times out then you are probably safe to use that. Creating the New VMs Now that I had collected the data that I needed I went ahead and created the new VMs. When asked for a “Boot Hard Disk” I used the “Choose a virtual hard disk file…” link to find the snapshot I had previously selected and set that to be the existing hard disk.  I chose the previously existing SOA 11.1.1.5 install for both the new DB and FMW machines because that snapshot had the database with the RCU completed that I wanted for my DB machine and it had the SOA software installed which I wanted for my FMW machine. After the initial creation of the virtual machine go into the network setting section and enable a second adapter which will be bridged.  Make a note of the MAC addresses (the last four digits should be sufficient) of the two adapters so that you can later set the bridged adapter to use fixed IP and the NAT adapter to use DHCP. We are now ready to start the VMs and reconfigure Linux. Reconfiguring Linux Because I now have two new machines I need to change their network configuration.  In particular I need to change the hostname, update the hosts file and change the network settings. Changing the Hostname I renamed both hosts by running the hostname command as root: hostname vboxfmw.oracle.com I also edited the /etc/sysconfig file and set the correct hostname in there. HOSTNAME=vboxfmw.oracle.com Changing the Network Settings I needed to change the network configuration to give the bridged network a fixed IP address.  I first explicitly set the MAC addresses of the two adapters, because the order of the virtual adapters in the VirtualBox Manager is not necessarily the same as the order of the adapters in the guest OS.  So I went in to the System->Preferences->Network Connections screen and explicitly set the “Device MAC address” for the two adapters. Having correctly mapped the Linux adapters to the VirtualBox adapters I then set the Bridged adapter to use fixed IP addressing rather than DHCP.  There is no need for additional routing or default gateways because we expect the two machine to be on the same LAN segment. Updating the Hosts File Having renamed the machines and reconfigured the network I then updated the /etc/hosts file to refer to the new machine name add a new line to the hosts file to provide an additional IP address for my server (the new fixed IP address) add a new line for the fixed IP address of the other virtual machine 10.0.3.101      vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.2.15       vboxdb.oracle.com       vboxdb  # Added by NetworkManager 10.0.3.102      vboxfmw.oracle.com      vboxfmw # Added by NetworkManager 127.0.0.1       localhost.localdomain   localhost ::1     vboxdb.oracle.com       vboxdb  localhost6.localdomain6 localhost6 To make sure everything takes effect I restarted the server. Reconfiguring the Database on the DB Machine Because we changed the hostname the listener and the EM console no longer start so I need to modify the listener.ora to use the new hostname and I also need to rebuild the EM configuration because it also relies on the hostname. I edited the $ORACLE_HOME/network/admin/listener.ora and changed the listening address to the new hostname:       (ADDRESS = (PROTOCOL = TCP)(HOST = vboxdb.oracle.com)(PORT = 1521)) After changing the listener.ora I was able to start the listener using: lsnrctl start I also had to reconfigure the EM database control.  I first deconfigured it using the command: emca -deconfig dbcontrol db -repos drop This drops the repository and removes any existing registered dbcontrols. I then re-configured it using the following command: emca -config dbcontrol db -repos create This creates the EM repository and then configures and starts dbcontrol. Now my database machine is ready so I can close it down and take a snapshot. Disabling the Database on the FMW Machine I set up the database to start automatically by creating a service called “dbora”.  On the FMW machine I do not need the database running so I can prevent it auto-starting by running the following command: chkconfig –del dbora Note that because I am using a snapshot it is not a waste of disk space to have the DB installed but not used.  As long as I don’t run it, it won’t cost me anything. I can now close the FMW machine down and take a snapshot. Creating a New Domain The FMW machine is now ready to create a new domain.  When creating the domain I can point it at the second machine which is running the database.  I can potentially run these machines on two separate physical machines as long as I have the original virtual machine available to both of the physical machines. Gotchas in Snapshotting VirtualBox does not support the concept of linked machines in a network like some virtualization technologies so when creating a snapshot it is a good idea to shut both VMs down and then take a snapshot on both of them.  This is because we want to keep the database in sync with the middleware.  One way to make sure that this happens would be to place all the domain configuration files on the database server via an NFS share, this would mean that all we would need to snapshot would be the database machine because that would hold all the state and configuration. The Sky’s the Limit We have covered a simple case of having just two machines.  I have a more complicated configuration in which two machine run a RAC database off the same base OS image, and two more machines run a SOA cluster based on the same OS image.  Just remember what machine holds state and what are the consequences of taking a snapshot.

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >