Search Results

Search found 10406 results on 417 pages for 'device'.

Page 97/417 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Still some questions about USB

  - by b-gen-jack-o-neill

  Hi, few days ago I asked here about implementing USB. Now, If I may, would like to ask few more questions, about thing I dind´t quite understood. So, first, If I am right, Windows has device driver for USB interface, for the physical device that sends and receives communication. But what this driver offers to system (user)? I mean, USB protocol is made so its devices are adressed. So you first adress device than send message to it. But how sophisticted is the device controller (HW) and its driver? Is it so sophisticated that it is a chip you just send device adress and data, and it writes the outcomming data out and incomming data to some internal register to be read, or thru DMA directly to memory? Or, how its drivers (SW) really work? Does its driver has some advanced functions like send _data to _device? Becouse I somewhat internally hope there is a way to directly send some data thru USB, maybe by calling USB drivers itself? Is there any good article, tutorial you know about to really explain how all this logic works? Thanks.

  Read the article

• How to check in which position (landscape or portrait) os the iPhone now?

  - by Knodel

  I have an app with a tab bar, and nav controllers in each tab. When user shakes the device, a UIImageView appears as a child view in the nav controller. But the UIImageView must contain a special image, depending on the device's current orientation. If I write just - (void)willAnimateRotationToInterfaceOrientation:(UIInterfaceOrientation) if (interfaceOrientation == UIInterfaceOrientationPortrait|| interfaceOrientation == UIInterfaceOrientationPortraitUpsideDown) { //Code } else if (interfaceOrientation == UIInterfaceOrientationLandscapeRight||interfaceOrientation == UIInterfaceOrientationLandscapeLeft) { //Code } } The view just goes crazy if user rotated the device before shaking. Is there a method to get iPhones current orientation?

  Read the article

• I'm writing a diagnostic app for iOS that loads a predetermined set of webpages and records the time it takes for the page to render on the device.

  - by user1754840

  I'm writing a sort of diagnostic app for iOS that opens a predetermined list of websites and records the elapsed time it takes each to load. I have the app open a UIWebView within a ViewController. Here are the important bits of the ViewController source: - (void)viewDidLoad { [super viewDidLoad]; DataClass *obj = [DataClass getInstance]; obj.startOfTest = [NSDate date]; //load the first webpage NSString *urlString = [websites objectAtIndex:obj.counter]; //assume firstWebsite is already instantiated and counter is initially set to zero obj.counter = obj.counter + 1; NSURL *url = [NSURL URLWithString:urlString]; NSURLRequest *request = [NSURLRequest requestWithURL:url]; [obj.websiteStartTimes addObject:[NSDate date]]; [webView loadRequest:request]; } - (void)webViewDidFinishLoading:(UIWebView *)localWebView{ DataClass *obj = [DataClass getInstance]; //gets 'global' variables if(!webView.loading){ NSString *urlString = [websites objectAt:obj.counter]; obj.counter = obj.counter + 1; NSURL *url = [NSURL URLWithString:urlString]; NSURLRequest *request = [NSURLRequest requestWithURL:url]; [obj.websiteStartTimes addObject:[NSDate date]]; [webView loadRequest:request]; } The problem with this code is that it seems to load the next website before the one before it has finished. I would have thought that both the call to webViewDidFinishLoading AND the if statement within that would ensure that the website would be done, but that's not the case. I've noticed that sometimes, a single website will invoke the didFinishLoading method more than once, but it would only enter the if statement once. For example, if I have a list of ten websites, the webView would only really show the 3rd and the 6th website on the list and then indicate that it was "done" rendering them all. What else can I do to ensure that a website is done loading completely and rendered to the screen before the app moves on to the next one?

  Read the article

• Ubuntu 12.04 KVM running Ubuntu 12.04 with linux-image-virtual crash on boot

  - by D.Mill

  One of my VMs is stuck on "pause" in virsh. If I destroy and restart it, it will go to pause after a bit of time as "running". I can at best enter my username at login if I'm quick but it'll then shutdown. I don't know where to start with this so any help would be great!! I can access the VMs files via guestfish. the kern.log and syslog don't populate new lines. This is the last input I get from kern.log: Dec 13 11:21:08 soft201 kernel: imklog 5.8.6, log source = /proc/kmsg started. Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpuset Dec 13 11:21:08 soft201 kernel: [ 0.000000] Initializing cgroup subsys cpu Dec 13 11:21:08 soft201 kernel: [ 0.000000] Linux version 3.2.0-34-virtual (buildd@allspice) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #53-Ubuntu SMP Thu Nov 15 11:08:40 UTC 2012 (Ubuntu 3.2.0-34.53-virtual 3.2.33) Dec 13 11:21:08 soft201 kernel: [ 0.000000] Command line: root=UUID=61d48b48-a06a-48fb-842e-b38014086a93 ro quiet splash Dec 13 11:21:08 soft201 kernel: [ 0.000000] KERNEL supported cpus: Dec 13 11:21:08 soft201 kernel: [ 0.000000] Intel GenuineIntel Dec 13 11:21:08 soft201 kernel: [ 0.000000] AMD AuthenticAMD Dec 13 11:21:08 soft201 kernel: [ 0.000000] Centaur CentaurHauls Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-provided physical RAM map: Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfffc000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000dfffc000 - 00000000e0000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000a20000000 (usable) Dec 13 11:21:08 soft201 kernel: [ 0.000000] NX (Execute Disable) protection: active Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI 2.4 present. Dec 13 11:21:08 soft201 kernel: [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2007 Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Dec 13 11:21:08 soft201 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) Dec 13 As you can see the last line gets cut off. I don't even know if this is that relevant. dmesg logs are empty. The qemu log for the VM returns this: 2012-12-13 12:29:47.584+0000: starting up LC_ALL=C PATH=/usr/local/sbin:/usr/local/bin:/usr/bin:/usr/sbin:/sbin:/bin QEMU_AUDIO_DRV=none /usr/bin/kvm -S -M pc-1.0 -enable-kvm -m 40960 -smp 14,sockets=14,cores=1,threads=1 -name numerink201 -uuid f4a889ed-a089-05d0-cc9d-9825ab1faeba -nodefconfig -nodefaults -chardev socket,id=charmonitor,path=/var/lib/libvirt/qemu/numerink201.monitor,server,nowait -mon chardev=charmonitor,id=monitor,mode=control -rtc base=utc -no-shutdown -drive file=/var/lib/libvirt/images/client.soft.fr/tmpcZAD9U.qcow2,if=none,id=drive-ide0-0-0,format=qcow2 -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0,bootindex=1 -fsdev local,security_model=none,id=fsdev-fs0,path=/home/shared_folders/soft201 -device virtio-9p-pci,id=fs0,fsdev=fsdev-fs0,mount_tag=hostshare,bus=pci.0,addr=0x5 -netdev tap,fd=18,id=hostnet0 -device virtio-net-pci,netdev=hostnet0,id=net0,mac=02:00:00:1d:b9:e7,bus=pci.0,addr=0x3 -chardev pty,id=charserial0 -device isa-serial,chardev=charserial0,id=serial0 -usb -vnc 127.0.0.1:0 -vga cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x4 char device redirected to /dev/pts/3 qemu: terminating on signal 15 from pid 28248 2012-12-13 12:30:14.455+0000: shutting down I've added more logging, libvirt.log gives me this: 2012-12-13 13:24:38.525+0000: 27694: info : libvirt version: 0.9.8 2012-12-13 13:24:38.525+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:38.525+0000: 27694: warning : qemuCapsInit:856 : Failed to get host power management capabilities 2012-12-13 13:24:39.865+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.865+0000: 27694: warning : lxcCapsInit:77 : Failed to get host power management capabilities 2012-12-13 13:24:39.866+0000: 27694: error : virExecWithHook:328 : Cannot find 'pm-is-supported' in path: No such file or directory 2012-12-13 13:24:39.866+0000: 27694: warning : umlCapsInit:87 : Failed to get host power management capabilities I don't really know where to go from here. I'll post whatever info you require

  Read the article

• Netgear VPN endpoint drops connectivity to single IP address

  - by Justin Bowers

  I'm having a strange issue with one of the networks I manage recently. We have about 14 different networks connected together through a Netgear hardware VPN. Everything has been running fine (other than standard connectivity problems) for a few years now, but I've hit a wall with a problem that's just cropped up at one of the VPN endpoint locations. Our primary VPN network is on the 192.168.1.0/24 subnet and our other 13 networks are on the 192.168.2.0/24 - 192.168.14.0/24 subnets. We run a terminal server on the 192.168.1.0/24 network with IP address 192.168.1.100. Starting Thursday of last week, we had a problem with connectivity of the 192.168.2.0/24 network to 192.168.1.100. When troubleshooting the problem, I found that Network 2 (192.168.2.0/24) still had connectivity to the Internet as well as VPN connectivity to Network 1 (192.168.1.0/24). We could ping and connect to any other device other than the server with IP address 192.168.1.100. Also, none of our networks had an issue accessing 192.168.1.100. I ran a scan on Network 2 after assigning static IP addresses to one of the workstations but received no response from 192.168.1.100 (looking for possibly a new device that someone had plugged into Network 2 that had a duplicate IP address with the server). Asking the staff, noone had reported connecting a new device to Network 2 as well. I then assigned a secondary IP address of 192.168.1.88 to the server and could ping and connect to the secondary IP address from Network 2, but still couldn't access it via 192.168.1.100. I then just rebooted the Netgear VPN Firewall (FVS318v3) and after it came back up, connectivity to 192.168.1.100 was restored. Beforehand, when checking for devices with a possible duplicate IP address, I did run a check for available wireless access points and stations and found none (our wireless is secured via MAC address access control through a WG102 device). I thought that it may have been a fluke for some reason since everything came back up after a power cycle of the VPN Firewall. Things ran fine for a few days until this afternoon, when the problem happened again. One of our users claimed that they had connectivity problems to the server and after connecting to the computer, I found that I couldn't ping the server address anymore. I could still ping the alternate IP address of the server though, so I went ahead and rebooted the VPN firewall again and connectivity was restored. Unfortunately, I can't find anything in the security or VPN logs of the firewall that helps point me in the right direction, so I thought I would go ahead and ask to see if anyone else has any other insight into why we've started having this problem. I am aware that it could still be a device with a duplicate IP address of the server on Network 2, but every employee claim states that there's been no such new device brought in to the network. I know this is a long read, but any help is appreciated! Thanks, Justin

  Read the article

• XenServer Converting HVM to Paravirtualised

  - by Karl Kloppenborg

  Recently I have been tasked with the daunting process of converting a setup of HVM enabled VMs (running on Citrix XenServer 5.6.0) into PV (paravirtualised) containers. The constraints of the project was that: The operating system must be functionally identical after the migration. minimal modification to the operating system (with exception of kernel / drive mapping) I also was allowed to change the bootloader(ie, grub) in what ever way I see fit. However, I have attempted this, I will firstly like to show you my steps I took. This at the moment is CentOS5.5 specific: Steps: yum install kernel-xen This installed: 2.6.18-194.32.1.el5xen edited: /boot/grub/menu.lst changed my specs to match: title CentOS (2.6.18-194.32.1.el5xen) root (hd0,0) kernel /vmlinuz-2.6.18-194.32.1.el5xen ro root=/dev/VolGroup00/LogVol00 console=xvc0 initrd /initrd-2.6.18-194.32.1.el5xen.img Then I changed my xenserver parameters to match: xe vm-param-set uuid=[vm uuid] PV-bootloader-args="--kernel /vmlinuz-2.6.18-194.32.1.el5xen --ramdisk /initrd-2.6.18-194.32.1.el5xen.img" xe vm-param-set uuid=[vm uuid] HVM-boot-policy="" xe vm-param-set uuid=[vm uuid] PV-bootloader=pygrub xe vbd-param-set uuid==[Virtual Block Device/VBD uuid] bootable=true Some things to note, I am running a VolGroup LVM ;) Anyways, after all these steps (which aren't much!) I boot the VM and it boots initial kernel just fine, however I am presented with this error: Boot Screen: device-mapper: dm-raid45: initialized v0.2594l Waiting for driver initialization. Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Activating logical volumes Volume group "VolGroup00" not found Creating root device. Mounting root filesystem. mount: could not find filesystem '/dev/root' Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Now my hints are that it cannot detect / because of the fact that when you change from HVM mode to PV it does something (not that obvious) When you make a SR (storage) on a HVM, you get it mounted to the guest os as /dev/hda. However in PV mode, this presents itself as /dev/xvda... Could this be the answer? and if so, how the heck to I implement it?? Update: So I have gotten a bit further in my quest, as it now detects the LVM's... To do this, I required to recompile the xen-kernel initrd image. Command: mkinitrd -v --builtin=xen_vbd --preload=xenblk initrd-2.6.18-194.32.1.el5xen.img 2.6.18-194.32.1.el5xen Now when I boot I get this: Boot Screen: Loading dm-raid45.ko module device-mapper: dm-raid45: initialized v0.2594l Scanning and configuring dmraid supported devices Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 3 logical volume(s) in volume group "VolGroup00" now active Creating root device. Mounting root filesystem. mount: error mounting /dev/root on /sysroot as ext3: Device or resource busy Setting up other filesystems. Setting up new root fs setuproot: moving /dev failed: No such file or directory no fstab.sys, mounting internal defaults setuproot: error mounting /proc: No such file or directory setuproot: error mounting /sys: No such file or directory Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys switchroot: mount failed: No such file or directory Kernel panic - not syncing: Attempted to kill init!

  Read the article

• Adding Extra Hard Drives Debian Fdisk

  - by Belgin Fish

  well I just got a new server and it's a little different than what I'm use to, when I run cfdisk I get WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sda1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdb: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdc'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdc: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdd'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdd: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdd1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sdf'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sdf: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdf1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. WARNING: GPT (GUID Partition Table) detected on '/dev/sde'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sde: 3000.6 GB, 3000592982016 bytes 255 heads, 63 sectors/track, 364801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sde1 1 267350 2147483647+ ee GPT Partition 1 does not start on physical sector boundary. Usually it tells me which ones arn't partitioned and stuff, and I only have 6 drives in my server and there's 6 showing up here so I'm only assuming the first ones already mounted and formatted correctly? I'm not really sure if anyone would help me out here. Basically I just want to format and mount these drives :)

  Read the article

• How to use more than 3 virtual disks in Linux using CentOS and XenServer

  - by 010110110101

  I've attached 5 virtual disks to a Virtual Machine in Citrix XenServer. The VM has the xs-tools installed. Initially it said that it couldn't add so many disks. After I installed the xs-tools, it let me add all the disks. But /dev doesn't show all the disks. It shows these: /dev/xvda /dev/xvdb /dev/xvdc /dev/cdrom Perhaps it is bound by the limits of an IDE bus? (3 disks + CD-ROM) If so, how does one change the VM to use SCSI? Edit: According to the documentation: 2.6.3. VM Block Devices In the PV Linux case, block devices are passed through as PV devices. XenServer does not attempt to emulate SCSI or IDE, but instead provides a more suitable interface in the virtual environment in the form of xvd* devices. It is also possible to get an sd* device using the same mechanism, where the PV driver inside the VM takes over the SCSI device namespace. This is not desirable so it is best to use xvd* where possible for PV guests (this is the default for Debian and RHEL). For Windows or other fully virtualized guests, XenServer emulates an IDE bus in the form of an hd* device. When using Windows, installing the Citrix Tools for Virtual Machines installs a special PV driver that works in a similar way to Linux, except in the fully virtualized environment. Still, with 5 virtual disks attached, I don't see the other xvd devices. Edit #2: (attached requested info) Host Machine: XenServer 6.1 Linux version 2.6.32.43-0.4.1.xs1.6.10.777.170770xen (geeko@buildhost) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Wed Apr 17 05:52:03 EDT 2013 Guest Machine: CentOS release 6.4 (Final) Linux version 2.6.32-358.6.2.el6.x86_64 ([email protected]) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Thu May 16 20:59:36 UTC 2013 Output of 'fdisk -l' on Guest Machine: Note, the disk beyond the first 3 attached are not displaying -- there should be 4 100GB disks. (There are a total of 5 disks displayed in XenCenter -- 16GB, 100GB, 100GB, 100GB, 100GB) Disk /dev/xvdb: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xfb6c95b9 Device Boot Start End Blocks Id System /dev/xvdb1 1 13054 104856223+ 83 Linux Disk /dev/xvda: 17.2 GB, 17179869184 bytes 255 heads, 63 sectors/track, 2088 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000e5f41 Device Boot Start End Blocks Id System /dev/xvda1 * 1 64 512000 83 Linux Partition 1 does not end on cylinder boundary. /dev/xvda2 64 2089 16264192 8e Linux LVM Disk /dev/xvdc: 107.4 GB, 107374182400 bytes 255 heads, 63 sectors/track, 13054 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed249ced Device Boot Start End Blocks Id System /dev/xvdc1 1 13054 104856223+ 83 Linux Disk /dev/mapper/vg_blue-lv_root: 14.6 GB, 14571012096 bytes 255 heads, 63 sectors/track, 1771 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_blue-lv_swap: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 I see that the Linux versions say SMP. The Guest VM doesn't say "xen" in the name. However, I have already run yum install kernel-xen. Could be a clue?

  Read the article

• How do you re-mount an ext3 fs readwrite after it gets mounted readonly from a disk error?

  - by cagenut

  Its a relatively common problem when something goes wrong in a SAN for ext3 to detect the disk write errors and remount the filesystem read-only. Thats all well and good, only when the SAN is fixed I can't figure out how to re-re-mount the filesystem read-write without rebooting. Behold: [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][active] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] [root@localhost ~]# mount /dev/mapper/mpath0 /mnt/foo [root@localhost ~]# touch /mnt/foo/blah All good, now I yank the LUN out from under it. [root@localhost ~]# touch /mnt/foo/blah [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system [root@localhost ~]# tail /var/log/messages Mar 18 13:17:33 localhost multipathd: sdb: tur checker reports path is down Mar 18 13:17:34 localhost multipathd: sdc: tur checker reports path is down Mar 18 13:17:35 localhost kernel: Aborting journal on device dm-2. Mar 18 13:17:35 localhost kernel: Buffer I/O error on device dm-2, logical block 1545 Mar 18 13:17:35 localhost kernel: lost page write due to I/O error on dm-2 Mar 18 13:17:36 localhost kernel: ext3_abort called. Mar 18 13:17:36 localhost kernel: EXT3-fs error (device dm-2): ext3_journal_start_sb: Detected aborted journal Mar 18 13:17:36 localhost kernel: Remounting filesystem read-only It only thinks its read-only, in reality its not even there. [root@localhost ~]# multipath -ll sdb: checker msg is "tur checker reports path is down" sdc: checker msg is "tur checker reports path is down" mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=0][hwhandler=0][rw] \_ round-robin 0 [prio=0][enabled] \_ 1:0:0:1 sdb 8:16 [failed][faulty] \_ 2:0:0:1 sdc 8:32 [failed][faulty] [root@localhost ~]# ll /mnt/foo/ ls: reading directory /mnt/foo/: Input/output error total 20 -rw-r--r-- 1 root root 0 Mar 18 13:11 bar How it still remembers that 'bar' file being there... mystery, but not important right now. Now I re-present the LUN: [root@localhost ~]# tail /var/log/messages Mar 18 13:23:58 localhost multipathd: sdb: tur checker reports path is up Mar 18 13:23:58 localhost multipathd: 8:16: reinstated Mar 18 13:23:58 localhost multipathd: mpath0: queue_if_no_path enabled Mar 18 13:23:58 localhost multipathd: mpath0: Recovered to normal mode Mar 18 13:23:58 localhost multipathd: mpath0: remaining active paths: 1 Mar 18 13:23:58 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:58 localhost multipathd: dm-2: devmap already registered Mar 18 13:23:59 localhost multipathd: sdc: tur checker reports path is up Mar 18 13:23:59 localhost multipathd: 8:32: reinstated Mar 18 13:23:59 localhost multipathd: mpath0: remaining active paths: 2 Mar 18 13:23:59 localhost multipathd: dm-2: add map (uevent) Mar 18 13:23:59 localhost multipathd: dm-2: devmap already registered [root@localhost ~]# multipath -ll mpath0 (36001f93000a310000299000200000000) dm-2 XIOTECH,ISE1400 [size=1.1T][features=1 queue_if_no_path][hwhandler=0][rw] \_ round-robin 0 [prio=2][enabled] \_ 1:0:0:1 sdb 8:16 [active][ready] \_ 2:0:0:1 sdc 8:32 [active][ready] Great right? It says [rw] right there. Not so fast: [root@localhost ~]# touch /mnt/foo/blah touch: cannot touch `/mnt/foo/blah': Read-only file system OK, doesn't do it automatically, I'll just give it a little push: [root@localhost ~]# mount -o remount /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only The hell you are: [root@localhost ~]# mount -o remount,rw /mnt/foo mount: block device /dev/mapper/mpath0 is write-protected, mounting read-only Noooooooooo. I have tried all sorts of different mount/tune2fs/dmsetup commands and I cannot figure out how to get it to un-flag the block device as write-protected. Rebooting will fix it, but I'd much rather do it on-line. An hour of googling has gotten me nowhere either. Save me ServerFault.

  Read the article

• Can't open DDMS

  - by Emerald214

  When I open a standalone DDMS besides Eclipse, it generates the below error. hieund@hieund:~$ ddms 01:51:58 E/ddms: Could not open Selected VM debug port (8700). Make sure you do not have another instance of DDMS or of the eclipse plugin running. If it's being used by something else, choose a new port number in the preferences. (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 (DDMS:6904): Gtk-WARNING **: gtk_widget_size_allocate(): attempt to allocate widget with width -5 and height 17 01:52:18 E/DDMS: device offline com.android.ddmlib.AdbCommandRejectedException: device offline at com.android.ddmlib.AdbHelper.setDevice(AdbHelper.java:736) at com.android.ddmlib.AdbHelper.executeRemoteCommand(AdbHelper.java:373) at com.android.ddmlib.Device.executeShellCommand(Device.java:364) at com.android.ddmuilib.SysinfoPanel.loadFromDevice(SysinfoPanel.java:159) at com.android.ddmuilib.SysinfoPanel.deviceSelected(SysinfoPanel.java:126) at com.android.ddmuilib.SelectionDependentPanel.deviceSelected(SelectionDependentPanel.java:52) at com.android.ddms.UIThread.selectionChanged(UIThread.java:1721) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:752) at com.android.ddmuilib.DevicePanel.notifyListeners(DevicePanel.java:740) at com.android.ddmuilib.DevicePanel.access$1100(DevicePanel.java:56) at com.android.ddmuilib.DevicePanel$1.widgetSelected(DevicePanel.java:357) at org.eclipse.swt.widgets.TypedListener.handleEvent(Unknown Source) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Display.runDeferredEvents(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) 01:52:32 E/ddms: shutting down due to uncaught exception 01:52:32 E/ddms: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.ArrayIndexOutOfBoundsException: -1) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.SWT.error(Unknown Source) at org.eclipse.swt.widgets.Synchronizer.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.runAsyncMessages(Unknown Source) at org.eclipse.swt.widgets.Display.readAndDispatch(Unknown Source) at com.android.ddms.UIThread.runUI(UIThread.java:517) at com.android.ddms.Main.main(Main.java:116) Caused by: java.lang.ArrayIndexOutOfBoundsException: -1 at org.eclipse.jface.viewers.AbstractTableViewer$VirtualManager.resolveElement(AbstractTableViewer.java:100) at org.eclipse.jface.viewers.AbstractTableViewer$1.handleEvent(AbstractTableViewer.java:70) at org.eclipse.swt.widgets.EventTable.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Widget.sendEvent(Unknown Source) at org.eclipse.swt.widgets.Table.checkData(Unknown Source) at org.eclipse.swt.widgets.Table.cellDataProc(Unknown Source) at org.eclipse.swt.widgets.Display.cellDataProc(Unknown Source) at org.eclipse.swt.internal.gtk.OS._gtk_list_store_append(Native Method) at org.eclipse.swt.internal.gtk.OS.gtk_list_store_append(Unknown Source) at org.eclipse.swt.widgets.Table.setItemCount(Unknown Source) at org.eclipse.jface.viewers.TableViewer.doSetItemCount(TableViewer.java:217) at org.eclipse.jface.viewers.AbstractTableViewer.internalVirtualRefreshAll(AbstractTableViewer.java:661) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:635) at org.eclipse.jface.viewers.AbstractTableViewer.internalRefresh(AbstractTableViewer.java:620) at org.eclipse.jface.viewers.StructuredViewer$7.run(StructuredViewer.java:1430) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1365) at org.eclipse.jface.viewers.StructuredViewer.preservingSelection(StructuredViewer.java:1328) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1428) at org.eclipse.jface.viewers.ColumnViewer.refresh(ColumnViewer.java:537) at org.eclipse.jface.viewers.StructuredViewer.refresh(StructuredViewer.java:1387) at com.android.ddmuilib.logcat.LogCatPanel$LogCatTableRefresherTask.run(LogCatPanel.java:1000) at org.eclipse.swt.widgets.RunnableLock.run(Unknown Source) ... 5 more I tried to change port for DDMS in Eclipse but it still doesn't work.

  Read the article

• Windows Server 2003 Terminal Server does not give out all available licenses

  - by Erwin Blonk

  I installed the Terminal Server role in Windows Server 2003 Standard 64-bits. Still, only 2 connections are allowed. The License Manager says that there are 10 Device CALs available, which is correct, and that none are given out. For good measure I let the server reboot, to no effect. Before this, there was another server (same Windows, except that it is 32 bits) active as a licensing server. I removed the role first and then then added it to the new server. I then removed the Terminal Server Licensing Server component off the old one and added it to the new one. After that, I added to licenses. When that didn't give the required result, I rebooted to new server. Still, the new server, with licenses and all, acts as if it has the 2 license RDP. The server are all stand-alone, there is no active directory been set up. Both servers are in different workgroups. Update (4/12/10): The server has changed the entries in the Terminal Server Licensing a few times. After installing the licenses it added an entry of which the exact phrasing I forgot but it was about temporary Windows 2003 device licenses. Later it added Windows Server 2003 - TS Per Device CAL. The temporary held 2 licenses (standard RDP licenses, I think) and the other 10. At some point, seemingly unrelated from the testing we did, it used a licenses from the new pool. This morning, 2 licenses were used from the pool of 10 and only 1 from the temporary/RDP pool (I wish I had screenshots to show, it changed every few hours oir so it seems). Although I had already activated the server over the internet, and re-activated it, I decided to go through the whole procedure by phone. Long story short, here is what it says now: Existing Windows 2000 Server, type:built-in [no licenses used, I add for for sake of being complete] Windows Server 2003 - Terminal Server Per Device CAL Token, type:open [none of 10 used] Windows Server 2003 - TS Per Device CAL, type:open [3 of 10 used] As I tried to explain, this is the end result after a few changes, most of which I can't directly connect to any action from my part. Only going to the activation procedure by phone seemed to directly effect the TS, resulting in the above configuration. Still, it is impossible to connect with more than 3 people, which is 1 up from the 2 that could connect yesterday. TS does say 7 licenses are avaible. Yet it won't give them out.

  Read the article

• nouveau Unknown Fermi chipset

  - by Abood Mount

  I've installed a fresh install of Ubuntu 13.04 and whenever I start my laptop I get this output error [ 19.469816] nouveau ![ DEVICE][0000:01:00.0] unknown Fermi chipset [ 19.469846] nouveau E[ DEVICE][0000:01:00.0] unknown chipset, 0x0d7000a2 [ 19.469870] nouveau E[ DRM] failed to create 0x80000080, -22 [ 19.470095] nouveau: probe of 0000:01:00.0 failed with error -22 I have Lenovo G580 with nVidia Geforce 710m.

  Read the article

• Getting macro keys from a razer blackwidow to work on linux

  - by Journeyman Geek

  I picked up a razer blackwidow ultimate that has additional keys meant for macros that are set using a tool that's installed on windows. I'm assuming that these arn't some fancypants joojoo keys and should emit scancodes like any other keys. Firstly is there a standard way to check these scancodes in linux? Secondly how do i set these keys to do things in command line and x based linux setups? My current linux install is xubuntu 10.10, but i'll be switching to kubuntu once i have a few things fixed up. Ideally the answer should be generic and system-wide Things i have tried so far: showkeys from the built in kbd package (in a seperate vt) - macro keys not detected xev - macro keys not detected lsusb and evdev output this ahk script's output suggests the M keys are not outputting standard scancodes Things i need to try snoopy pro + reverse engineering (oh dear) Wireshark - preliminary futzing around seems to indicate no scancodes emitted when what i seem to think is the keyboard is monitored and keys pressed. Might indicate additional keys are a seperate device or need to be initialised somehow. Need to cross reference that with lsusb output from linux, in 3 scenarios - standalone, passed through to a windows VM without the drivers installed, and the same with. LSUSB only detects one device on a standalone linux install It might be useful to check if the mice use the same razer synapse driver , since that means some variation of razercfg might work (not detected. only seems to work for mice) Things i have Have worked out: In a windows system with the driver, the keyboard is seen as a keyboard and a pointing device. And said pointing device uses, in addition to your bog standard mouse drivers.. a driver for something called a razer synapse. Mouse driver seen in linux under evdev and lsusb as well Single Device under OS X apparently, though i have yet to try lsusb equivilent on that Keyboard goes into pulsing backlight mode in OS X upon initialisation with the driver. This should probably indicate that there's some initialisation sequence sent to the keyboard on activation. They are, in fact, fancypants joojoo keys. Extending this question a little I have access to a windows system so if i need to use any tools on that to help answer the question, its fine. I can also try it on systems with and without the config utility. The expected end result is still to make those keys usable on linux however. I also realise this is a very specific family of hardware. I would be willing to test anything that makes sense on a linux system if i have detailed instructions - this should open up the question to people who have linux skills, but no access to this keyboard The minimum end result i require I need these keys detected, and usable in any fashion on any of the current graphical mainstream ubuntu varients

  Read the article

• Moesion Webinar: Managing BizTalk Server from your Smartphone or Tablet Without Upsetting your Boss

  - by gsusx

  BizTalkers, This Thursday we will be hosting a webinar to highlight how to use Moesion to manage your BizTalk Server environment from your mobile device. We will walk through the complete feature set of Moesion HTML5 BizTalk management console as well as complementary features of the Moesion platform that can be used to manage your BizTalk environment from your mobile device. More importantly, if you are a BizTalk developer or IT Pro we REALLY REALLY REALLY would love to get your feedback about the...(read more)

  Read the article

• Linux Software RAID recovery

  - by Zoredache

  I am seeing a discrepancy between the output of mdadm --detail and mdadm --examine, and I don't understand why. This output mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Array Size : 3662760640 (3493.08 GiB 3750.67 GB) Used Dev Size : 1465104256 (1397.23 GiB 1500.27 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 Persistence : Superblock is persistent Seems to contradict this. (the same for every disk in the array) mdadm --examine /dev/sdc2 /dev/sdc2: Magic : a92b4efc Version : 0.90.00 UUID : 1f54d708:60227dd6:163c2a05:89fa2e07 (local to host) Creation Time : Wed Mar 14 18:20:52 2012 Raid Level : raid10 Used Dev Size : 1465104320 (1397.23 GiB 1500.27 GB) Array Size : 2930208640 (2794.46 GiB 3000.53 GB) Raid Devices : 5 Total Devices : 5 Preferred Minor : 2 The array was created like this. mdadm -v --create /dev/md2 \ --level=raid10 --layout=o2 --raid-devices=5 \ --chunk=64 --metadata=0.90 \ /dev/sdg2 /dev/sdf2 /dev/sde2 /dev/sdd2 /dev/sdc2 Each of the 5 individual drives have partitions like this. Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00057754 Device Boot Start End Blocks Id System /dev/sdc1 2048 34815 16384 83 Linux /dev/sdc2 34816 2930243583 1465104384 fd Linux raid autodetect Backstory So the SATA controller failed in a box I provide some support for. The failure was a ugly and so individual drives fell out of the array a little at a time. While there are backups, we the are not really done as frequently as we really need. There is some data that I am trying to recover if I can. I got additional hardware and I was able to access the drives again. The drives appear to be fine, and I can get the array and filesystem active and mounted (using read-only mode). I am able to access some data on the filesystem and have been copying that off, but I am seeing lots of errors when I try to copy the most recent data. When I am trying to access that most recent data I am getting errors like below which makes me think that the array size discrepancy may be the problem. Mar 14 18:26:04 server kernel: [351588.196299] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.196309] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.196313] dm-7: rw=0, want=6619839616, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.199260] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.199264] dm-7: rw=0, want=20647626304, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.202446] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.202450] dm-7: rw=0, want=19973212288, limit=6442450944 Mar 14 18:26:04 server kernel: [351588.205516] attempt to access beyond end of device Mar 14 18:26:04 server kernel: [351588.205520] dm-7: rw=0, want=8009695096, limit=6442450944

  Read the article

• Ubuntu and Belkin N150 f6d4050 Wireless USB adapter v2

  - by Andrew

  I'm new to Ubuntu, and I'm trying to get my Belkin USB adapter to work. There are plenty of discussions out there already about this, but none really helped me out. Here's what I've done - Installed ndiswrapper Installed ndisgtk Installed the driver (rt2870.inf) via ndisgtk ndisgtk reported that the driver was installed and the hardware was present. The green light on the adapter is solid green, which I assume means that Ubuntu is aware of it's presence. However, when I click the little wireless symbol at the navigation bar, there's no option to choose my adapter (assuming that it's supposed to show up there...) My adapter version is F6D4050 - Where do I go from here? I'm a Ubuntu newb, so speak slowly. :P lsusb - andrew@ubuntu:~$ lsusb Bus 002 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 002 Device 002: ID 04f9:0229 Brother Industries, Ltd Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 004: ID 050d:935b Belkin Components Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsmod - andrew@ubuntu:~$ lsmod Module Size Used by binfmt_misc 7960 1 fbcon 39270 71 tileblit 2487 1 fbcon font 8053 1 fbcon bitblit 5811 1 fbcon softcursor 1565 1 bitblit vga16fb 12757 0 vgastate 9857 1 vga16fb snd_cmipci 37557 2 snd_intel8x0 31155 2 snd_ac97_codec 125394 1 snd_intel8x0 ac97_bus 1450 1 snd_ac97_codec snd_mpu401 6875 0 snd_pcm_oss 41394 0 snd_mixer_oss 16299 1 snd_pcm_oss snd_pcm 87882 4 snd_cmipci,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_opl3_lib 10846 1 snd_cmipci snd_hwdep 6924 1 snd_opl3_lib snd_mpu401_uart 6857 2 snd_cmipci,snd_mpu401 snd_seq_dummy 1782 0 snd_seq_oss 31219 0 snd_seq_midi 5829 0 snd_rawmidi 23420 2 snd_mpu401_uart,snd_seq_midi snd_seq_midi_event 7267 2 snd_seq_oss,snd_seq_midi snd_seq 57481 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event nouveau 515227 2 ttm 60847 1 nouveau snd_timer 23649 3 snd_pcm,snd_opl3_lib,snd_seq snd_seq_device 6888 6 snd_opl3_lib,snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq ns558 3704 0 ppdev 6375 0 drm_kms_helper 30742 1 nouveau joydev 11072 0 ndiswrapper 244768 0 gameport 10966 3 snd_cmipci,ns558 usblp 12407 0 asus_atk0110 10033 0 parport_pc 29958 1 serio_raw 4918 0 drm 199204 4 nouveau,ttm,drm_kms_helper i2c_algo_bit 6024 1 nouveau edac_core 45423 0 edac_mce_amd 9278 0 k8temp 3912 0 snd 71106 23 snd_cmipci,snd_intel8x0,snd_ac97_codec,snd_mpu401,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_opl3_lib,snd_hwdep,snd_mpu401_u art,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8052 1 snd snd_page_alloc 8500 2 snd_intel8x0,snd_pcm i2c_nforce2 6099 0 lp 9336 0 parport 37160 3 ppdev,parport_pc,lp hid_logitech 8820 0 ff_memless 5109 1 hid_logitech ohci1394 30260 0 usbhid 41084 1 hid_logitech hid 83440 2 hid_logitech,usbhid usb_storage 49833 0 skge 41049 0 ieee1394 94771 1 ohci1394 sata_sil 8895 0 forcedeth 55592 0 sata_nv 23778 1 pata_amd 11962 1 floppy 63156 0

  Read the article

• DHCPv6: Provide IPv6 information in your local network

  Even though IPv6 might not be that important within your local network it might be good to get yourself into shape, and be able to provide some details of your infrastructure automatically to your network clients. This is the second article in a series on IPv6 configuration: Configure IPv6 on your Linux system DHCPv6: Provide IPv6 information in your local network Enabling DNS for IPv6 infrastructure Accessing your web server via IPv6 Piece of advice: This is based on my findings on the internet while reading other people's helpful articles and going through a couple of man-pages on my local system. IPv6 addresses for everyone (in your network) Okay, after setting up the configuration of your local system, it might be interesting to enable all your machines in your network to use IPv6. There are two options to solve this kind of requirement... Either you're busy like a bee and you go around to configure each and every system manually, or you're more the lazy and effective type of network administrator and you prefer to work with Dynamic Host Configuration Protocol (DHCP). Obviously, I'm of the second type. Enabling dynamic IPv6 address assignments can be done with a new or an existing instance of a DHCPd. In case of Ubuntu-based installation this might be isc-dhcp-server. The isc-dhcp-server allows address pooling for IP and IPv6 within the same package, you just have to run to independent daemons for each protocol version. First, check whether isc-dhcp-server is already installed and maybe running your machine like so: $ service isc-dhcp-server6 status In case, that the service is unknown, you have to install it like so: $ sudo apt-get install isc-dhcp-server Please bear in mind that there is no designated installation package for IPv6. Okay, next you have to create a separate configuration file for IPv6 address pooling and network parameters called /etc/dhcp/dhcpd6.conf. This file is not automatically provided by the package, compared to IPv4. Again, use your favourite editor and put the following lines: $ sudo nano /etc/dhcp/dhcpd6.conf authoritative;default-lease-time 14400; max-lease-time 86400;log-facility local7;subnet6 2001:db8:bad:a55::/64 {    option dhcp6.name-servers 2001:4860:4860::8888, 2001:4860:4860::8844;    option dhcp6.domain-search "ios.mu";    range6 2001:db8:bad:a55::100 2001:db8:bad:a55::199;    range6 2001:db8:bad:a55::/64 temporary;} Next, save the file and start the daemon as a foreground process to see whether it is going to listen to requests or not, like so: $ sudo /usr/sbin/dhcpd -6 -d -cf /etc/dhcp/dhcpd6.conf eth0 The parameters are explained quickly as -6 we want to run as a DHCPv6 server, -d we are sending log messages to the standard error descriptor (so you should monitor your /var/log/syslog file, too), and we explicitely want to use our newly created configuration file (-cf). You might also use the command switch -t to test the configuration file prior to running the server. In my case, I ended up with a couple of complaints by the server, especially reporting that the necessary lease file wouldn't exist. So, ensure that the lease file for your IPv6 address assignments is present: $ sudo touch /var/lib/dhcp/dhcpd6.leases$ sudo chown dhcpd:dhcpd /var/lib/dhcp/dhcpd6.leases Now, you should be good to go. Stop your foreground process and try to run the DHCPv6 server as a service on your system: $ sudo service isc-dhcp-server6 startisc-dhcp-server6 start/running, process 15883 Check your log file /var/log/syslog for any kind of problems. Refer to the man-pages of isc-dhcp-server and you might check out Chapter 22.6 of Peter Bieringer's IPv6 Howto. The instructions regarding DHCPv6 on the Ubuntu Wiki are not as complete as expected and it might not be as helpful as this article or Peter's HOWTO. But see for yourself. Does the client get an IPv6 address? Running a DHCPv6 server on your local network surely comes in handy but it has to work properly. The following paragraphs describe briefly how to check the IPv6 configuration of your clients, Linux - ifconfig or ip command First, you have enable IPv6 on your Linux by specifying the necessary directives in the /etc/network/interfaces file, like so: $ sudo nano /etc/network/interfaces iface eth1 inet6 dhcp Note: Your network device might be eth0 - please don't just copy my configuration lines. Then, either restart your network subsystem, or enable the device manually using the dhclient command with IPv6 switch, like so: $ sudo dhclient -6 You would either use the ifconfig or (if installed) the ip command to check the configuration of your network device like so: $ sudo ifconfig eth1eth1      Link encap:Ethernet  HWaddr 00:1d:09:5d:8d:98            inet addr:192.168.160.147  Bcast:192.168.160.255  Mask:255.255.255.0          inet6 addr: 2001:db8:bad:a55::193/64 Scope:Global          inet6 addr: fe80::21d:9ff:fe5d:8d98/64 Scope:Link          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1 Looks good, the client has an IPv6 assignment. Now, let's see whether DNS information has been provided, too. $ less /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)#     DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTENnameserver 2001:4860:4860::8888nameserver 2001:4860:4860::8844nameserver 192.168.1.2nameserver 127.0.1.1search ios.mu Nicely done. Windows - netsh Per description on TechNet the netsh is defined as following: "Netsh is a command-line scripting utility that allows you to, either locally or remotely, display or modify the network configuration of a computer that is currently running. Netsh also provides a scripting feature that allows you to run a group of commands in batch mode against a specified computer. Netsh can also save a configuration script in a text file for archival purposes or to help you configure other servers." And even though TechNet states that it applies to Windows Server (only), it is also available on Windows client operating systems, like Vista, Windows 7 and Windows 8. In order to get or even set information related to IPv6 protocol, we have to switch the netsh interface context prior to our queries. Open a command prompt in Windows and run the following statements: C:\Users\joki>netshnetsh>interface ipv6netsh interface ipv6>show interfaces Select the device index from the Idx column to get more details about the IPv6 address and DNS server information (here: I'm going to use my WiFi device with device index 11), like so: netsh interface ipv6>show address 11 Okay, address information has been provided. Now, let's check the details about DNS and resolving host names: netsh interface ipv6> show dnsservers 11 Okay, that looks good already. Our Windows client has a valid IPv6 address lease with lifetime information and details about the configured DNS servers. Talking about DNS server... Your clients should be able to connect to your network servers via IPv6 using hostnames instead of IPv6 addresses. Please read on about how to enable a local named with IPv6.

  Read the article

• Why do I see a large performance hit with DRBD?

  - by BHS

  I see a much larger performance hit with DRBD than their user manual says I should get. I'm using DRBD 8.3.7 (Fedora 13 RPMs). I've setup a DRBD test and measured throughput of disk and network without DRBD: dd if=/dev/zero of=/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 4.62985 s, 116 MB/s / is a logical volume on the disk I'm testing with, mounted without DRBD iperf: [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec According to Throughput overhead expectations, the bottleneck would be whichever is slower, the network or the disk and DRBD should have an overhead of 3%. In my case network and I/O seem to be pretty evenly matched. It sounds like I should be able to get around 100 MB/s. So, with the raw drbd device, I get dd if=/dev/zero of=/dev/drbd2 bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 6.61362 s, 81.2 MB/s which is slower than I would expect. Then, once I format the device with ext4, I get dd if=/dev/zero of=/mnt/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 9.60918 s, 55.9 MB/s This doesn't seem right. There must be some other factor playing into this that I'm not aware of. global_common.conf global { usage-count yes; } common { protocol C; } syncer { al-extents 1801; rate 33M; } data_mirror.res resource data_mirror { device /dev/drbd1; disk /dev/sdb1; meta-disk internal; on cluster1 { address 192.168.33.10:7789; } on cluster2 { address 192.168.33.12:7789; } } For the hardware I have two identical machines: 6 GB RAM Quad core AMD Phenom 3.2Ghz Motherboard SATA controller 7200 RPM 64MB cache 1TB WD drive The network is 1Gb connected via a switch. I know that a direct connection is recommended, but could it make this much of a difference? Edited I just tried monitoring the bandwidth used to try to see what's happening. I used ibmonitor and measured average bandwidth while I ran the dd test 10 times. I got: avg ~450Mbits writing to ext4 avg ~800Mbits writing to raw device It looks like with ext4, drbd is using about half the bandwidth it uses with the raw device so there's a bottleneck that is not the network.

  Read the article

• Auto-select external soundcard?

  - by dandelion

  Just got an external usb sound card because my internal speakers broke. The new sound card works just fine after plugging it in and going to System Settings Sound, and then selecting the device. However, I was curious as to whether there was a way to make ubuntu auto-select the device without having to go through System Settings. Can it just be selected upon plugging it in? Any and all help appreciated :)) (ps its running 12.04)

  Read the article

• ath9k driver does not weak up

  - by shantanu

  I know this is common question but i found no suitable answer, so i am asking this again. I installed ubuntu 11.10. I found the bug for ath9k, so set first network boot from BIOS menu. That's worked. I have upgraded to 12.04 yesterday. Now ath9k is creating problem again. First network boot is still enable. ath9k works at start. But failed(connect again and again) after couple of minutes. dmesg show error that it can not weak up in 500us. So i tried #compat-wireless-3.5.1-1. But result is same. I have also added #nohwcrypt=1 option in /etc/modeprob.d/ath9k.conf. Still no luck. I tried #rmmod and then modprobe sudo modprobe ath9k nohwcrypt=1 dmesg shows me error: [ 400.690086] ath9k: Driver unloaded [ 406.214329] ath9k 0000:06:00.0: enabling device (0000 -> 0002) [ 406.214348] ath9k 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 406.214368] ath9k 0000:06:00.0: setting latency timer to 64 [ 406.428517] ath9k 0000:06:00.0: Failed to initialize device [ 406.428852] ath9k 0000:06:00.0: PCI INT A disabled [ 406.428887] ath9k: probe of 0000:06:00.0 failed with error -5 dmesg error when driver fail: 355.023521] ath: Chip reset failed [ 355.023524] ath: Unable to reset channel, reset status -22 [ 355.023556] ath: Unable to set channel [ 355.088569] ath: Failed to stop TX DMA, queues=0x10f! [ 355.122708] ath: DMA failed to stop in 10 ms AR_CR=0xffffffff AR_DIAG_SW=0xffffffff DMADBG_7=0xffffffff [ 355.122714] ath: Could not stop RX, we could be confusing the DMA engine when we start RX up [ 355.263962] ath: Chip reset failed [ 355.263966] ath: Unable to reset channel (2437 MHz), reset status -22 [ 358.996063] ath: Failed to wakeup in 500us [ 364.004182] ath: Failed to wakeup in 500us I can not install fresh ubuntu because i have lots of application installed. System : Acer Aspire 4250 AMD dual core 1.6GHZ Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) EDITED Now i am in serious problem. No wifi device is not showing in ifconfig or lshw commands. Only ether-net interface shows. I tried (FN + WIFI) several times to enable the device but nothing helps. Now I have installed fresh ubuntu 12.04. Please help lshw -c network: *-network description: Ethernet interface product: 82566DC Gigabit Network Connection vendor: Intel Corporation physical id: 19 bus info: pci@0000:00:19.0 logical name: eth0 version: 02 serial: 00:19:d1:7a:8e:f9 size: 100Mbit/s capacity: 1Gbit/s width: 32 bits clock: 33MHz capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.0.0-k duplex=full firmware=1.1-0 ip=192.168.1.114 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:45 memory:90300000-9031ffff memory:90324000-90324fff ioport:20c0(size=32) rfkill command does not show anything but no error.

  Read the article

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• How to connect nokia lumis 520 to ubuntu 12.04

  - by pavankumar

  i have done following steps sudo add-apt-repository ppa:langdalepl/gvfs-mtp sudo apt-get update and updated some upgrades from update manager after doing above steps i am able to see lumia phone name in file system.But when i try to mount device i am getting following errors Unable to mount RM-914|Nokia Lumia 520 Unable to open MTP device '[usb:001,010]' is there any way to solve these problem?

  Read the article

• ATI Radeon HD 4650 AGP Video card not recognized properly

  - by PastorLarry

  I have an ASUS ATI Radeon HD 4650 AGP in this system (yeah, I know how old it is). I've been on Ubuntu since 10.04, and the system has never properly recognized the card. I have always had the VESA drivers installed. Now that I have the time to address the problem, 12.04 was listing the card as "Unknown" under the System Settings. Meanwhile, Sysinfo recognizes the card as: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 0028 So I know that this card should be using the radeon driver (or even the radeonhd driver). However, when I installed the mesa-utils package, the card is suddenly reported as: Gallium 0.4 on llvmpipe (LLVM 0x300) So now, I'm completely at a loss. It seems that the llvmpipe stuff has to do with OpenGL, but it still appears that I don't have the proper video driver installed. That being said, anyone know what I can do to force the system to recognize the card and use the radeon driver? [EDIT 05.28] I did look at some other information, including glxinfo and a couple of other commands (it was REALLY late, so I don't remember the other commands) and I got these: glxinfo | grep vendor: server glx vendor string: SGI client glx vendor string: Mesa Project and SGI OpenGL vendor string: X.org glxinfo | grep renderer: OpenGL renderer string: Gallium 0.4 on AMD RV730 One of the other commands gave a whole lot of info and near the end stated that the activation string for the radeon driver was "modprobe radeon". I've tried that from sudo and as root, but it doesn't seem to change anything. I'm at a complete loss. I've even added the xorg-edgers ppa to my Software Sources and updated and rebooted the system, but nothing has changed. Most of all, I can't seem to find any documentation on this issue, as it seems that it's assumed that the radeon driver will install automatically, no questions asked. I feel like such a newbie. Does anyone have any ideas on this? [edit 05.28] results of lsmod | grep radeon (in a more readable format than the comment below): radeon 733693 3 ttm 65344 1 radeon drm_kms_helper 45466 1 radeon drm 197692 5 radeon,ttm,drm_kms_helper i2c_algo_bit 13199 1 radeon [edit 05.29] This is my /etc/X11/xorg.conf: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" So here is my question. Can I simply change the name of the driver in the device section to "radeon" instead of "fglrx" and have the radeon driver work? Or is ther a way to use this as a tmeplate and change the appropriate lines and activate the radeon driver through this file?

  Read the article

• Network is not working anymore - Ubuntu 12.04

  - by Jonathan

  Network is not working anymore - Ubuntu 12.04 Hello, I have a problem with my network connection. I have been using the same laptop with Ubuntu and the same connection for more than a year, and suddenly yesterday the connection stopped working (both wireless and wired). I've tested with another computer and the connection is fine (both wireless and wired). I've been reading similar posts but I haven't found a solution yet. I tried a few commands that I'm posting here (my system is in spanish, so I have traslated it to english, maybe the terms are not accurate): grep -i eth /var/log/syslog | tail Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): now managed Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): device state change: unmanaged - unavailable (reason 'managed') [10 20 2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): bringing up device. Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): preparing device. Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845743] forcedeth 0000:00:0a.0: irq 41 for MSI/MSI-X Jun 3 18:45:40 vanesa-pc kernel: [ 7351.845984] forcedeth 0000:00:0a.0: eth0: no link during initialization Jun 3 18:45:40 vanesa-pc kernel: [ 7351.847103] ADDRCONF(NETDEV_UP): eth0: link is not ready Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: (eth0): deactivating device (reason 'managed') [2] Jun 3 18:45:40 vanesa-pc NetworkManager[3584]: Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:0a.0/net/eth0 Jun 3 18:45:40 vanesa-pc kernel: [ 7351.848817] ADDRCONF(NETDEV_UP): eth0: link is not ready ifconfig -a eth0 Link encap:Ethernet addressHW 00:1b:24:fc:a8:d1 ACTIVE BROADCAST MULTICAST MTU:1500 Metric:1 Packages RX:0 errors:16 lost:0 overruns:0 frame:16 Packages TX:123 errors:0 lost:0 overruns:0 carrier:0 colissions:0 length.tailTX:1000 Bytes RX:0 (0.0 B) TX bytes:26335 (26.3 KB) Interruption:41 Base address: 0x2000 lo Link encap:Local loop Inet address:127.0.0.1 Mask:255.0.0.0 Inet6 address: ::1/128 Scope:Host ACTIVE LOOP WORKING MTU:16436 Metrics:1 Packages RX:1550 errors:0 lost:0 overruns:0 frame:0 Packages TX:1550 errors:0 lost:0 overruns:0 carrier:0 colissions:0 long.tailTX:0 Bytes RX:125312 (125.3 KB) TX bytes:125312 (125.3 KB) iwconfig lo no wireless extensions. eth0 no wireless extensions. sudo lshw -C network *-network description: Ethernet interface product: MCP67 Ethernet manufacturer: NVIDIA Corporation Physical id: a bus information: pci@0000:00:0a.0 logical name: eth0 version: a2 series: 00:1b:24:fc:a8:d1 capacity: 100Mbit/s width: 32 bits clock: 66MHz capacities: pm msi ht bus_master cap_list ethernet physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=forcedeth driverversion=0.64 latency=0 link=no maxlatency=20 mingnt=1 multicast=yes port=MII resources: irq:41 memoria:f6288000-f6288fff ioport:30f8(size=8) memoria:f6289c00-f6289cff memoria:f6289800-f628980f lsmod Module Size Used by usbhid 41906 0 hid 77367 1 usbhid rfcomm 38139 0 parport_pc 32114 0 ppdev 12849 0 bnep 17830 2 bluetooth 158438 10 rfcomm,bnep binfmt_misc 17292 1 joydev 17393 0 hp_wmi 13652 0 sparse_keymap 13658 1 hp_wmi nouveau 708198 3 ttm 65344 1 nouveau drm_kms_helper 45466 1 nouveau drm 197692 5 nouveau,ttm,drm_kms_helper i2c_algo_bit 13199 1 nouveau psmouse 87213 0 mxm_wmi 12859 1 nouveau serio_raw 13027 0 k8temp 12905 0 i2c_nforce2 12906 0 wmi 18744 2 hp_wmi,mxm_wmi video 19068 1 nouveau mac_hid 13077 0 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp forcedeth 58096 0 Let me know if I can give you more information. Thank you very much in advance, Jonathan

  Read the article

• How can I compile SM 3.0 effects in D3D11 in slimdx?

  - by jacker

  var bytecode = ShaderBytecode.CompileFromFile("shaders\\testShader.fx", "fx_5_0", ShaderFlags.None, SlimDX.D3DCompiler.EffectFlags.None, null, null, out str); var effect = new SlimDX.Direct3D11.Effect(gpu.Device, bytecode); Works fine but if I try to use another shader model like 4.0 or 3.0 it throws an error on the new effect creation: E_FAIL: An undetermined error occurred (-2147467259) How do I compile older shaders? And I've read about device context but I can't find any information on how to use them to maintain DX9 compatibility.

  Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >