Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 97/332 | < Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

  • Automatic switching between monitor configurations

    - by Michael Aquilina
    I have a laptop and an external monitor and i was wondering if there was a simple approach to switching between multiple monitor configurations based on the detected available displays. For example: When i am at home and i plug in my external monitor i would like this to automatically become enabled and the laptop screen to become disabled. As soon as i pull out the display cable for the external monitor, i would like the laptop screen to automatically become enabled. I was expecting this to just "work" just like it does in windows - but it seems to be much harder than that. I am aware of the xrandr command to turn displays on and off but i cannot seem to find a way to get this to work the way i describe above. I had also found this post about switching between multiple monitor configurations and the results seem a bit inconclusive. However i was hoping that with xrandr there would be a simpler solution. For me, the fact that when i pull out my external monitor the screen just goes black and i get an error message is a big issue holding me back from making the complete switch to linux as i move around alot as a student. My OS of choice is currently Kubuntu 12.04 but i am willing to change to something else if it provides a better way of setting up the described setup.

    Read the article

  • Installing nVidia drivers for Quadro FX 880M on 10.10 caused shutdown/startup issues.

    - by Chantz
    So I was facing weird graphics drivers issues due to the default nouveau drivers that came installed with Ubuntu 10.10 hence I installed the latest nVidia graphics drivers & I the weird graphics issues stopped happening. So far so good, but when I tried to shut down the laptop it got stuck at the window with text 15, shutting down... modem-manager: Caught signal 15, shutting down... init: Disconnected from system us init: dbus main process (1107) killed by TERM signal And this happens .everytime.without.fail. I tried updating the kernel and any/all drivers through update manager but it stil happens. Not only this even the startup screen is totally screwed up. It just displays Ubuntu 10.10 in text with 3 dots. But that is acceptable. To power cycle down the laptop each and everytime for shutdown is not cool. Same goes for when I try to restart. Interesting thing is if I try to shutdown the laptop when I am on the login screen it does so without any problems. I googled & many people seem to face the same issue but I couldn't find any silver bullet hoping to find one here.

    Read the article

  • I have Ubuntu only and need to install Windows

    - by Terzuz
    I had Windows 8, I installed Ubuntu for a new OS, Then I want to sadly go back to Windows , I have a Windows Vista *.iso but I can't boot from it. When I try to extract the '.iso file and have the contents on my USB so it can boot up , When I restart and click F9 for my Boot Device Options , Only my Hard Drive and CD ROM are there but my "Generic Flash Drive" is not , But when I do not have Windows Vista '.iso on it , It will show up in the list. How can I make a partition of some sort, Provide instructions since I am new at this all , then I need to be able to use the Windows Vista installer and install Windows Vista, I would like Dual-Boot if possible. Info: I have the HP 2000 Laptop (Mine was removed from the Best Buy Website so the closest laptop to the specifications and the design is the link at the bottom) I am running Ubuntu 12.10. I have 4GB of RAM , 220 GB in my Hard Drive left , I have a USB Flash Drive which works sometimes , other times it fails. Note - I tried using GParted in Ubuntu but I had a problem where the main drive with 220 GB Free was locked , I am not sure what to do and can not find the correct forum. http://www.bestbuy.com/site/HP+-+Pavilion+15.6"+Laptop+-+4GB+Memory+-+320GB+Hard+Drive+-+Pewter/5043836.p?id=1218608951204&skuId=5043836

    Read the article

  • Loign Scren hangs after entering password in Ubuntu 12.04

    - by Ravi
    When I enter my password in the login box nothing happens. It is stucked there. It was running fine earlier. Actually, I installed the package gnome-panel and cairo-dock. Then I logged out and selected gnome classic session. Then I added a ppa from the webupd8.org to install the themes(link). I opened Ubuntu Tweak tool. When I changed the theme to Evolve the whole laptop stopped responding. None of my keyboard and mouse was working. So I was forced to do a forced shutdown. Now after restart I cannot login into ubuntu. I hear a loud sound of my laptop fan when the laptop is stucked. (Probably CPU will be at 100% when it stucked). Please help me. How can I login back to ubuntu? I am using ubuntu 12.04 and have installed all the latest updates..

    Read the article

  • Problem with dual monitor

    - by Gernot
    I have a laptop with a nvidia optimus graka. I'm also useing a 23" external monitor. It never really worked... . After installation (it was a clean installation) the 23" monitor worked as it should, but the LCD from the laptop wasn't at the right resolution. And every time i tried to change this the PC crashed. Today i had a litle bit of time so i decided to solve this problem. I've tried a few things ( e.g. I've installed bumblebee with the nvidia driver and tested it. It's working...) but nothing solved my problem. Instead of getting any closer to the solution, it's gotten even more strange now... . Now, the display setting isn't recognizing a 2nd monitor at all. But I get on the 23" monitor (which is not shown in the display setting) a screen with the same resolution as the one on the laptop. The display settings looks so: Any help would be wonderful.

    Read the article

  • Librated error when creating partition table

    - by Marko
    I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

    Read the article

  • Accidentally Changed Dual Monitor Setup and don't know how to reset it

    - by user203783
    I have a dual monitor setup with my laptop and an external Asus monitor running under Ubuntu 11.10. When I first started using Ubuntu, it synced both screens. What showed up on my laptop showed up on my eternal monitor. Last night, I accidentally knocked the HDMI cable from its port (not that unusual in the tight space I work in). When I plugged it back in, as usual, the external monitor only displayed my wallpaper. Usually, I just restart Ubuntu and it resets, but last night what I now realize was the display console came up and somehow I changed the setup. Now the two screens show different jobs so to speak. Also, the external monitor doesn't display the ribbon, making switching between Firefox tabs and windows or apps jarring. I write for a living and need to quickly check bits of research, notes or sources while writing and the extra switching between mouse pad and external mouse to get one or the other screen to respond interrupts my work flow. The only technical help I can offer is when the display console popped up, the graphical representation of the screens was that the external screen appeared layered over by about one-quarter of the laptop screen. Again, these were icons. I tried to replicate that after I obviously screwed things up. If someone could help. I would appreciate it. If I have to use terminal, that's fine. I started using computers for writing back when they were green DOS prompts. There's a certain elegance to prompt commands to me. Maybe it's the writer in me. Again, if anyone can help me return my screens to sync under Ubuntu 11.10, I would greatly appreciate it.

    Read the article

  • ADF Hands on Training &ndash; Prerequisites for 22nd March 2011

    - by Grant Ronald
    For those of you coming to the ADF Hands on training on the 22nd March in London, there was a link to the prerequisites.  Unfortunately, in a reshuffle of content on OTN, this page was removed.  So, over the next day or so I’m hoping to the pull together the relevant information into this blog post.  So keep checking back! Firstly, you need to being your laptop with you to do the hands on exercises.  No laptop, no hands on. Recommended 2GB RAM running Microsoft Windows XP SP2, 2003 Server SP2, Vista (32 bit only), Windows 7 or Linux or Mac 2GHz Processor (less will be acceptable but slower) Mozilla Firefox 2.0 or higher, Internet Explorer 7 or higher, Safari 3.0 and higher, Google Chrome 1.0 or higher Winzip or other extracting software Adobe Acrobat reader Flash (if you want to see dynamic graphs in your application) As for software, you will need have installed JDeveloper 11g.  The hands on instructions are based on 11.1.1.2 (or is it 11.1.1.3)! anyway, either of those or 11.1.1.4 would be required. You also need an Oracle database on your machine and access to the HR schema (which should be unlocked).  Don’t expect to have access to a network and VPN to a database. A simple test, unplug your laptop from your corporate network, run up JDev  and select File –> New –> Database connection and make sure you can connect to HR database and see the Emp/Dept etc tables.  If you can do that, you should be good to go. I would strongly recommend ensuring you have this in place before you arrive on Tuesday. Look forward to seeing you there.

    Read the article

  • How can I configure the touchpad and keyboard settings on a Dell Inspiron 5110?

    - by Robik
    I am using ubuntu 11.10. I want the following 3 things: I have dell inspiron 5110 laptop. There is button at the top right corner of laptop which can be used for turning the screen off. It works in windows but it does not work in ubuntu 11.10. Even in the manual of the laptop, it the button is supported only in windows. Is there a way to activate it in ubuntu 11.10? Some of the keys like: "break" etc. are missing. Can I use other keys (or combinations of other keys) to function as those missing keys? In the program, "mouse and touchpad", there is no tab for touchpad. I want to enable vertical and horizontal scrolling. How do I do that? The command: xinput list shows Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys Please help!!

    Read the article

  • need a different backup solution

    - by DigitalJedi
    I just built a new media/backup server using Ubuntu 12.04 64bit. I installed a hard drive to be used only for music, pictures, and videos and formatted it fat32 so my 1 and only Windows PC could map those folders as netshares. My laptop, also running Ubuntu 12.04, is what I am using the most so new media is first downloaded on my laptop. I've already got the music, videos, and pictures folders from my server mounting as shares on my laptop on boot thanks to some fstab edits and sshfs. Now I'm wanting either an app or script that could backup any new files I add to my local media folders to the mounted folders on my server. I've been Googling all day and found a few apps like rsync but they seem to have issues with ext4 to vfat backups. I thought maybe a script would be best but I'm new to scripting in Linux and don't want to mess anything up. Basically I am looking for something that will backup only newly added files to the server. I figure I could schedule it once a week. There are some stipulations. For example, my local music folder has over 700 folders for each artist/band then sub folders inside those for albums. I want something smart enough to only copy newly added content so I'm guessing the modified date would probably be a good condition if I were scripting. I'm rambling. Any suggestions would be GREATLY appreciated. I'm not finding anything to suit my needs. I'm almost to the point of just learning bas scripting so I can write something but then it will be a couple weeks or so before I have a possible solution and I'd like something in place sooner.

    Read the article

  • How to prevent computer from automatically sleeping and/or hibernating?

    - by mehaase
    I'm running Ubuntu 12.04, and my laptop* won't wake from sleep/suspend/hibernate. (Is sleep the same thing as suspend?) I'm not even sure which of these things it's doing. When I am done working for the day, I lock my screen (Control-Alt-L). When I come back the next day, the screen is in power saving mode, and no amount of typing or clicking (on the usb keyboard/mouse or the builtin keyboard/trackpad) nor tapping the power button will bring it back to life. The only way I can get my machine to work is to hold down the power button until it shuts off, then press the power button again to turn it back on. Obviously, anything I had open from the previous day is pretty much gone -- in particular, my VMs all get rudely shut down without any warning. This is driving me INSANE. I spend the first hour of every work day trying to figure out how to get my computer to stop locking up over night. What I've tried: Editing the org.freedesktop.upower.policy to disable suspend and hibernate. Setting power management options in "Power" section of "System Settings". Looking at all power management options in the BIOS (none appear to be relevant to sleep/suspend/hibernate). Reading every forum post/askubuntu post that I can find that's even tangentially related to the subject. My question: how to disable the automatic sleep and/or hibernate (and/or anything similar) in Ubuntu 12.04. I don't care if it's still possible to sleep/suspend/hibernate/whatever by pushing buttons or running some command or reciting led zeppelin lyrics backwards. I just want my laptop to be ready for work in the morning. *The laptop is a Dell Latitude something or other. I don't want to get too specific because I've seen a lot of similar questions get closed for being too specific. I think my question is generic enough to stand -- it's a question about the latest, stable version of Ubuntu.

    Read the article

  • jquery is not working over local network [migrated]

    - by Kortyell Davis
    i have a fedora server running apache web server. the server is connected to a home network. i have a laptop connected to the same network. i can enter the ip address of my server into the browser of my laptop and pull up the index.html file located in the document root directory of the fedora home server. the index.html file contains jquery code. the jquery code only works when i open it locally in my browser (e.g. right click open with firefox), but when i attempt to view the webpage from my laptop the jquery code is not executed. the code is here below. <script type="text/javascript" src="jquery-1.8.2.js"></script> ' $(document).ready(function() { $('#form').hide(); $('input[type=text]').focus(function() { $(this).val(''); }); $('input[type=password]').focus(function() { $(this).val(''); }); $('.form').hide(); $('#log').click(function(){ $('#form').toggle(); }); $('#reg').click(function(){ $('.form').toggle(); }); });

    Read the article

  • Enable wireless greyed out. Disabled by hard switch. Details inside

    - by ltlunatic
    Ok so the basic issue here is this: My wireless has not once enabled through many environments. Wubi install: Enable wireless greyed out Live cd: greyed out Partition alongside win7: greyed out. I installed all software updates, checked additional drivers, installed the latest driver for RTL8111/8168B. rfkill list shows phy0 and phy1. Phy0 has a hardblock on. everything else is unblocked. Now consider this also: I have both a wireless adapter inside my laptop and a wireless usb adapter outside. The internal adapter does not work, hence why I think hardblock is on even if the external slider in 'on'. I have tried commands such as rfkill unblock all as well as sudo rfkill unblock all. No wireless options in the BIOS. I have tried another laptop and desktop and they get wireless from the get go. Ubuntu on my laptop seems to see my belkin adapter as well as my internal (ralink) one. But trying to scan networks yields no results and says network is down always. Ubuntu version: 12.04 lts Ask me anything else you may need to help me, thanks.

    Read the article

  • After tarball restore my PC (tar xvfpz backup.tgz -C /), my sound card and network are not working. How to detect?

    - by axton hunger
    1 . I have a old laptop I installed Ubuntu 12.04 on. (It was ACER) 2 . I booted into single user mode and backed it up via cd / sudo -i tar cvpzf backup.tgz --exclude=/proc --exclude=/dev --exclude=/lost+found --exclude=/backup.tgz --exclude=/mnt --exclude=/sys / 3 . I installed a fresh copy of Ubuntu 1204 on my new laptop (It is Dell) 4 . I boot into single user mode 5 . I backup the existing /boot directory 6 . I untar my backup to restore on to the Dell sudo tar xvfpz backup.tgz -C / 7 . I restore the previous /boot directory again 8 . I boot it up, and my profile and settings are loaded ok but, Ubuntu shows that there is no Sound Card.. I cannot use unity to drag and change volume. I noticed that the network card also doesnt work. ** How do you make ubuntu recognize changed hardware, if the hardware is already configured for a different laptop? Does anyone know?**

    Read the article

  • High CPU usage with Team Speak 3.0.0-rc2

    - by AlexTheBird
    The CPU usage is always around 40 percent. I use push-to-talk and I had uninstalled pulseaudio. Now I use Alsa. I don't even have to connect to a Server. By simply starting TS the cpu usage goes up 40 percent and stays there. The CPU usage of 3.0.0-rc1 [Build: 14468] is constantly 14 percent. This is the output of top, mpstat and ps aux while I am running TS3 ... of course: alexandros@alexandros-laptop:~$ top top - 18:20:07 up 2:22, 3 users, load average: 1.02, 0.85, 0.77 Tasks: 163 total, 1 running, 162 sleeping, 0 stopped, 0 zombie Cpu(s): 5.3%us, 1.9%sy, 0.1%ni, 91.8%id, 0.7%wa, 0.1%hi, 0.1%si, 0.0%st Mem: 2061344k total, 964028k used, 1097316k free, 69116k buffers Swap: 3997688k total, 0k used, 3997688k free, 449032k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2714 alexandr 20 0 206m 31m 24m S 37 1.6 0:12.78 ts3client_linux 868 root 20 0 47564 27m 10m S 8 1.4 3:21.73 Xorg 1 root 20 0 2804 1660 1204 S 0 0.1 0:00.53 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.01 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.45 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.08 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:01.17 events/0 10 root 20 0 0 0 0 S 0 0.0 0:00.81 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 14 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.00 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.05 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.99 ata/0 26 root 20 0 0 0 0 S 0 0.0 0:00.92 ata/1 27 root 20 0 0 0 0 S 0 0.0 0:00.00 ata_aux 28 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 29 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd alexandros@alexandros-laptop:~$ mpstat Linux 2.6.32-32-generic (alexandros-laptop) 16.06.2011 _i686_ (2 CPU) 18:20:15 CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle 18:20:15 all 5,36 0,09 1,91 0,68 0,07 0,06 0,00 0,00 91,83 alexandros@alexandros-laptop:~$ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 2804 1660 ? Ss 15:58 0:00 /sbin/init root 2 0.0 0.0 0 0 ? S 15:58 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S 15:58 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/0] root 6 0.0 0.0 0 0 ? S 15:58 0:00 [migration/1] root 7 0.0 0.0 0 0 ? S 15:58 0:00 [ksoftirqd/1] root 8 0.0 0.0 0 0 ? S 15:58 0:00 [watchdog/1] root 9 0.0 0.0 0 0 ? S 15:58 0:01 [events/0] root 10 0.0 0.0 0 0 ? S 15:58 0:00 [events/1] root 11 0.0 0.0 0 0 ? S 15:58 0:00 [cpuset] root 12 0.0 0.0 0 0 ? S 15:58 0:00 [khelper] root 13 0.0 0.0 0 0 ? S 15:58 0:00 [async/mgr] root 14 0.0 0.0 0 0 ? S 15:58 0:00 [pm] root 16 0.0 0.0 0 0 ? S 15:58 0:00 [sync_supers] root 17 0.0 0.0 0 0 ? S 15:58 0:00 [bdi-default] root 18 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/0] root 19 0.0 0.0 0 0 ? S 15:58 0:00 [kintegrityd/1] root 20 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/0] root 21 0.0 0.0 0 0 ? S 15:58 0:00 [kblockd/1] root 22 0.0 0.0 0 0 ? S 15:58 0:00 [kacpid] root 23 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_notify] root 24 0.0 0.0 0 0 ? S 15:58 0:00 [kacpi_hotplug] root 25 0.0 0.0 0 0 ? S 15:58 0:00 [ata/0] root 26 0.0 0.0 0 0 ? S 15:58 0:00 [ata/1] root 27 0.0 0.0 0 0 ? S 15:58 0:00 [ata_aux] root 28 0.0 0.0 0 0 ? S 15:58 0:00 [ksuspend_usbd] root 29 0.0 0.0 0 0 ? S 15:58 0:00 [khubd] root 30 0.0 0.0 0 0 ? S 15:58 0:00 [kseriod] root 31 0.0 0.0 0 0 ? S 15:58 0:00 [kmmcd] root 34 0.0 0.0 0 0 ? S 15:58 0:00 [khungtaskd] root 35 0.0 0.0 0 0 ? S 15:58 0:00 [kswapd0] root 36 0.0 0.0 0 0 ? SN 15:58 0:00 [ksmd] root 37 0.0 0.0 0 0 ? S 15:58 0:00 [aio/0] root 38 0.0 0.0 0 0 ? S 15:58 0:00 [aio/1] root 39 0.0 0.0 0 0 ? S 15:58 0:00 [ecryptfs-kthrea] root 40 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/0] root 41 0.0 0.0 0 0 ? S 15:58 0:00 [crypto/1] root 48 0.0 0.0 0 0 ? S 15:58 0:03 [scsi_eh_0] root 50 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_1] root 53 0.0 0.0 0 0 ? S 15:58 0:00 [kstriped] root 54 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/0] root 55 0.0 0.0 0 0 ? S 15:58 0:00 [kmpathd/1] root 56 0.0 0.0 0 0 ? S 15:58 0:00 [kmpath_handlerd] root 57 0.0 0.0 0 0 ? S 15:58 0:00 [ksnapd] root 58 0.0 0.0 0 0 ? S 15:58 0:03 [kondemand/0] root 59 0.0 0.0 0 0 ? S 15:58 0:02 [kondemand/1] root 60 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/0] root 61 0.0 0.0 0 0 ? S 15:58 0:00 [kconservative/1] root 213 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_2] root 222 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_3] root 234 0.0 0.0 0 0 ? S 15:58 0:00 [scsi_eh_4] root 235 0.0 0.0 0 0 ? S 15:58 0:01 [usb-storage] root 255 0.0 0.0 0 0 ? S 15:58 0:00 [jbd2/sda5-8] root 256 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 257 0.0 0.0 0 0 ? S 15:58 0:00 [ext4-dio-unwrit] root 290 0.0 0.0 0 0 ? S 15:58 0:00 [flush-8:0] root 318 0.0 0.0 2316 888 ? S 15:58 0:00 upstart-udev-bridge --daemon root 321 0.0 0.0 2616 1024 ? S<s 15:58 0:00 udevd --daemon root 526 0.0 0.0 0 0 ? S 15:58 0:00 [kpsmoused] root 528 0.0 0.0 0 0 ? S 15:58 0:00 [led_workqueue] root 650 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/0] root 651 0.0 0.0 0 0 ? S 15:58 0:00 [radeon/1] root 652 0.0 0.0 0 0 ? S 15:58 0:00 [ttm_swap] root 654 0.0 0.0 2612 984 ? S< 15:58 0:00 udevd --daemon root 656 0.0 0.0 0 0 ? S 15:58 0:00 [hd-audio0] root 657 0.0 0.0 2612 916 ? S< 15:58 0:00 udevd --daemon root 674 0.6 0.0 0 0 ? S 15:58 0:57 [phy0] syslog 715 0.0 0.0 34812 1776 ? Sl 15:58 0:00 rsyslogd -c4 102 731 0.0 0.0 3236 1512 ? Ss 15:58 0:02 dbus-daemon --system --fork root 740 0.0 0.1 19088 3380 ? Ssl 15:58 0:00 gdm-binary root 744 0.0 0.1 18900 4032 ? Ssl 15:58 0:01 NetworkManager avahi 749 0.0 0.0 2928 1520 ? S 15:58 0:00 avahi-daemon: running [alexandros-laptop.local] avahi 752 0.0 0.0 2928 544 ? Ss 15:58 0:00 avahi-daemon: chroot helper root 753 0.0 0.1 4172 2300 ? S 15:58 0:00 /usr/sbin/modem-manager root 762 0.0 0.1 20584 3152 ? Sl 15:58 0:00 /usr/sbin/console-kit-daemon --no-daemon root 836 0.0 0.1 20856 3864 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Display1 root 856 0.0 0.1 4836 2388 ? S 15:58 0:00 /sbin/wpa_supplicant -u -s root 868 2.3 1.3 36932 27924 tty7 Rs+ 15:58 3:22 /usr/bin/X :0 -nr -verbose -auth /var/run/gdm/auth-for-gdm-a46T4j/database -nolisten root 891 0.0 0.0 1792 564 tty4 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty4 root 901 0.0 0.0 1792 564 tty5 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty5 root 908 0.0 0.0 1792 564 tty2 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty2 root 910 0.0 0.0 1792 568 tty3 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty3 root 913 0.0 0.0 1792 564 tty6 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty6 root 917 0.0 0.0 2180 1072 ? Ss 15:58 0:00 acpid -c /etc/acpi/events -s /var/run/acpid.socket daemon 924 0.0 0.0 2248 432 ? Ss 15:58 0:00 atd root 927 0.0 0.0 2376 900 ? Ss 15:58 0:00 cron root 950 0.0 0.0 11736 1372 ? Ss 15:58 0:00 /usr/sbin/winbindd root 958 0.0 0.0 11736 1184 ? S 15:58 0:00 /usr/sbin/winbindd root 974 0.0 0.1 6832 2580 ? Ss 15:58 0:00 /usr/sbin/cupsd -C /etc/cups/cupsd.conf root 1078 0.0 0.0 1792 564 tty1 Ss+ 15:58 0:00 /sbin/getty -8 38400 tty1 gdm 1097 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session root 1112 0.0 0.1 19216 3292 ? Sl 15:58 0:00 /usr/lib/gdm/gdm-session-worker root 1116 0.0 0.1 5540 2932 ? S 15:58 0:01 /usr/lib/upower/upowerd root 1131 0.0 0.1 6308 3824 ? S 15:58 0:00 /usr/lib/policykit-1/polkitd 108 1163 0.0 0.2 16788 4360 ? Ssl 15:58 0:01 /usr/sbin/hald root 1164 0.0 0.0 3536 1300 ? S 15:58 0:00 hald-runner root 1188 0.0 0.0 3612 1256 ? S 15:58 0:00 hald-addon-input: Listening on /dev/input/event6 /dev/input/event5 /dev/input/event2 root 1194 0.0 0.0 3612 1224 ? S 15:58 0:00 /usr/lib/hal/hald-addon-rfkill-killswitch root 1200 0.0 0.0 3608 1240 ? S 15:58 0:00 /usr/lib/hal/hald-addon-generic-backlight root 1202 0.0 0.0 3616 1236 ? S 15:58 0:02 hald-addon-storage: polling /dev/sr0 (every 2 sec) root 1204 0.0 0.0 3616 1236 ? S 15:58 0:00 hald-addon-storage: polling /dev/sdb (every 2 sec) root 1211 0.0 0.0 3624 1220 ? S 15:58 0:00 /usr/lib/hal/hald-addon-cpufreq 108 1212 0.0 0.0 3420 1200 ? S 15:58 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 1000 1222 0.0 0.1 24196 2816 ? Sl 15:58 0:00 /usr/bin/gnome-keyring-daemon --daemonize --login 1000 1240 0.0 0.3 28228 7312 ? Ssl 15:58 0:00 gnome-session 1000 1274 0.0 0.0 3284 356 ? Ss 15:58 0:00 /usr/bin/ssh-agent /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1277 0.0 0.0 3392 772 ? S 15:58 0:00 /usr/bin/dbus-launch --exit-with-session gnome-session 1000 1278 0.0 0.0 3160 1652 ? Ss 15:58 0:00 /bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session 1000 1281 0.0 0.2 8172 4636 ? S 15:58 0:00 /usr/lib/libgconf2-4/gconfd-2 1000 1287 0.0 0.5 24228 10896 ? Ss 15:58 0:03 /usr/lib/gnome-settings-daemon/gnome-settings-daemon 1000 1290 0.0 0.1 6468 2364 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd 1000 1293 0.0 0.6 38104 13004 ? S 15:58 0:03 metacity 1000 1296 0.0 0.1 30280 2628 ? Ssl 15:58 0:00 /usr/lib/gvfs//gvfs-fuse-daemon /home/alexandros/.gvfs 1000 1301 0.0 0.0 3344 988 ? S 15:58 0:03 syndaemon -i 0.5 -k 1000 1303 0.0 0.1 8060 3488 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gdu-volume-monitor root 1306 0.0 0.1 15692 3104 ? Sl 15:58 0:00 /usr/lib/udisks/udisks-daemon 1000 1307 0.4 1.0 50748 21684 ? S 15:58 0:34 python -u /usr/share/screenlets/DigiClock/DigiClockScreenlet.py 1000 1308 0.0 0.9 35608 18564 ? S 15:58 0:00 python /usr/share/screenlets-manager/screenlets-daemon.py 1000 1309 0.0 0.3 19524 6468 ? S 15:58 0:00 /usr/lib/policykit-1-gnome/polkit-gnome-authentication-agent-1 1000 1311 0.0 0.5 37412 11788 ? S 15:58 0:01 gnome-power-manager 1000 1312 0.0 1.0 50772 22628 ? S 15:58 0:03 gnome-panel 1000 1313 0.1 1.5 102648 31184 ? Sl 15:58 0:10 nautilus root 1314 0.0 0.0 5188 996 ? S 15:58 0:02 udisks-daemon: polling /dev/sdb /dev/sr0 1000 1315 0.0 0.6 51948 12464 ? SL 15:58 0:01 nm-applet --sm-disable 1000 1317 0.0 0.1 16956 2364 ? Sl 15:58 0:00 /usr/lib/gvfs/gvfs-afc-volume-monitor 1000 1318 0.0 0.3 20164 7792 ? S 15:58 0:00 bluetooth-applet 1000 1321 0.0 0.1 7260 2384 ? S 15:58 0:00 /usr/lib/gvfs/gvfs-gphoto2-volume-monitor 1000 1323 0.0 0.5 37436 12124 ? S 15:58 0:00 /usr/lib/notify-osd/notify-osd 1000 1324 0.0 1.9 197928 40456 ? Ssl 15:58 0:06 /home/alexandros/.dropbox-dist/dropbox 1000 1329 0.0 0.3 20136 7968 ? S 15:58 0:00 /usr/bin/gnome-screensaver --no-daemon 1000 1331 0.0 0.1 7056 3112 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-trash --spawner :1.6 /org/gtk/gvfs/exec_spaw/0 root 1340 0.0 0.0 2236 1008 ? S 15:58 0:00 /sbin/dhclient -d -sf /usr/lib/NetworkManager/nm-dhcp-client.action -pf /var/run/dhcl 1000 1348 0.0 0.1 42252 3680 ? Ssl 15:58 0:00 /usr/lib/bonobo-activation/bonobo-activation-server --ac-activate --ior-output-fd=19 1000 1384 0.0 1.7 80244 35480 ? Sl 15:58 0:02 /usr/bin/python /usr/lib/deskbar-applet/deskbar-applet/deskbar-applet --oaf-activate- 1000 1388 0.0 0.5 26196 11804 ? S 15:58 0:01 /usr/lib/gnome-panel/wnck-applet --oaf-activate-iid=OAFIID:GNOME_Wncklet_Factory --oa 1000 1393 0.1 0.5 25876 11548 ? S 15:58 0:08 /usr/lib/gnome-applets/multiload-applet-2 --oaf-activate-iid=OAFIID:GNOME_MultiLoadAp 1000 1394 0.0 0.5 25600 11140 ? S 15:58 0:03 /usr/lib/gnome-applets/cpufreq-applet --oaf-activate-iid=OAFIID:GNOME_CPUFreqApplet_F 1000 1415 0.0 0.5 39192 11156 ? S 15:58 0:01 /usr/lib/gnome-power-manager/gnome-inhibit-applet --oaf-activate-iid=OAFIID:GNOME_Inh 1000 1417 0.0 0.7 53544 15488 ? Sl 15:58 0:00 /usr/lib/gnome-applets/mixer_applet2 --oaf-activate-iid=OAFIID:GNOME_MixerApplet_Fact 1000 1419 0.0 0.4 23816 9068 ? S 15:58 0:00 /usr/lib/gnome-panel/notification-area-applet --oaf-activate-iid=OAFIID:GNOME_Notific 1000 1488 0.0 0.3 20964 7548 ? S 15:58 0:00 /usr/lib/gnome-disk-utility/gdu-notification-daemon 1000 1490 0.0 0.1 6608 2484 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-burn --spawner :1.6 /org/gtk/gvfs/exec_spaw/1 1000 1510 0.0 0.1 6348 2084 ? S 15:58 0:00 /usr/lib/gvfs/gvfsd-metadata 1000 1531 0.0 0.3 19472 6616 ? S 15:58 0:00 /usr/lib/gnome-user-share/gnome-user-share 1000 1535 0.0 0.4 77128 8392 ? Sl 15:58 0:00 /usr/lib/evolution/evolution-data-server-2.28 --oaf-activate-iid=OAFIID:GNOME_Evoluti 1000 1601 0.0 0.5 69576 11800 ? Sl 15:59 0:00 /usr/lib/evolution/2.28/evolution-alarm-notify 1000 1604 0.0 0.7 33924 15888 ? S 15:59 0:00 python /usr/share/system-config-printer/applet.py 1000 1701 0.0 0.5 37116 11968 ? S 15:59 0:00 update-notifier 1000 1892 4.5 7.0 406720 145312 ? Sl 17:11 3:09 /opt/google/chrome/chrome 1000 1896 0.0 0.1 69812 3680 ? S 17:11 0:02 /opt/google/chrome/chrome 1000 1898 0.0 0.6 91420 14080 ? S 17:11 0:00 /opt/google/chrome/chrome --type=zygote 1000 1916 0.2 1.3 140780 27220 ? Sl 17:11 0:12 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1918 0.7 1.8 155720 37912 ? Sl 17:11 0:31 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1921 0.0 1.0 135904 21052 ? Sl 17:11 0:02 /opt/google/chrome/chrome --type=extension --disable-client-side-phishing-detection - 1000 1927 6.5 3.6 194604 74960 ? Sl 17:11 4:32 /opt/google/chrome/chrome --type=renderer --disable-client-side-phishing-detection -- 1000 2156 0.4 0.7 48344 14896 ? Rl 18:03 0:04 gnome-terminal 1000 2157 0.0 0.0 1988 712 ? S 18:03 0:00 gnome-pty-helper 1000 2158 0.0 0.1 6504 3860 pts/0 Ss 18:03 0:00 bash 1000 2564 0.2 0.1 6624 3984 pts/1 Ss+ 18:17 0:00 bash 1000 2711 0.0 0.0 4208 1352 ? S 18:19 0:00 /bin/bash /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/ts3client_runsc 1000 2714 36.5 1.5 210872 31960 ? SLl 18:19 0:18 ./ts3client_linux_x86 1000 2743 0.0 0.0 2716 1068 pts/0 R+ 18:20 0:00 ps aux Output of vmstat: alexandros@alexandros-laptop:~$ vmstat procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 1093324 69840 449496 0 0 27 10 476 667 6 2 91 1 Output of lsusb alexandros@alexandros-laptop:~$ lspci 00:00.0 Host bridge: Silicon Integrated Systems [SiS] 671MX 00:01.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS968 [MuTIOL Media IO] (rev 01) 00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f) 00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller 00:05.0 IDE interface: Silicon Integrated Systems [SiS] SATA Controller / IDE mode (rev 03) 00:06.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:07.0 PCI bridge: Silicon Integrated Systems [SiS] PCI-to-PCI bridge 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 00:0f.0 Audio device: Silicon Integrated Systems [SiS] Azalia Audio Controller 01:00.0 VGA compatible controller: ATI Technologies Inc Mobility Radeon X2300 02:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) The Team Speak log file : 2011-06-19 19:04:04.223522|INFO | | | Logging started, clientlib version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:04.761149|ERROR |SoundBckndIntf| | /home/alexandros/Programme/TeamSpeak3-Client-linux_x86_back/soundbackends/libpulseaudio_linux_x86.so error: NOT_CONNECTED 2011-06-19 19:04:05.871770|INFO |ClientUI | | Failed to init text to speech engine 2011-06-19 19:04:05.894623|INFO |ClientUI | | TeamSpeak 3 client version: 3.0.0-rc2 [Build: 14642] 2011-06-19 19:04:05.895421|INFO |ClientUI | | Qt version: 4.7.2 2011-06-19 19:04:05.895571|INFO |ClientUI | | Using configuration location: /home/alexandros/.ts3client/ts3clientui_qt.conf 2011-06-19 19:04:06.559596|INFO |ClientUI | | Last update check was: Sa. Jun 18 00:08:43 2011 2011-06-19 19:04:06.560506|INFO | | | Checking for updates... 2011-06-19 19:04:07.357869|INFO | | | Update check, my version: 14642, latest version: 14642 2011-06-19 19:05:52.978481|INFO |PreProSpeex | 1| Speex version: 1.2rc1 2011-06-19 19:05:54.055347|INFO |UIHelpers | | setClientVolumeModifier: 10 -8 2011-06-19 19:05:54.057196|INFO |UIHelpers | | setClientVolumeModifier: 11 2 Thanks for taking the time to read my message. UPDATE: Thanks to nickguletskii's link I googled for "alsa cpu usage" (without quotes) and it brought me to a forum. A user wrote that by directly selecting the hardware with "plughw:x.x" won't impact the performance of the system. I have selected it in the TS 3 configuration and it worked. But this solution is not optimal because now no other program can access the sound output. If you need any further information or my question is unclear than please tell me.

    Read the article

  • Apache: How can i see my localhost on 192.168.1.101 from 192.168.1.102?

    - by takpar
    Hi, I'm running Apache on Ubuntu. My IP address is 192.168.1.101 While http://localhost and http://192.168.1.101 work fine in my PC, I cannot access it from within my laptop using http://192.168.1.102 It's strange. I can ping 192.168.1.101 but I got "The connection has timed out." in browser. I'm using default apache config. so this is what my sites-available/default looks like: NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /home/www/public_html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/www/public_html> Options Indexes FollowSymLinks MultiViews #AllowOverride None AllowOverride all Order allow,deny allow from all </Directory> /etc/apache2/posrts.conf NameVirtualHost *:80 Listen 80 <IfModule mod_ssl.c> # If you add NameVirtualHost *:443 here, you will also have to change # the VirtualHost statement in /etc/apache2/sites-available/default-ssl # to <VirtualHost *:443> # Server Name Indication for SSL named virtual hosts is currently not # supported by MSIE on Windows XP. Listen 443 </IfModule> <IfModule mod_gnutls.c> Listen 443 </IfModule> my laptop runs Ubuntu as well. so I don't think this is a firewall issue. commands executed in Laptop (192.168.1.102): adp@adp-laptop:~$ ping 192.168.1.101 PING 192.168.1.101 (192.168.1.101) 56(84) bytes of data. 64 bytes from 192.168.1.101: icmp_seq=1 ttl=64 time=32.1 ms 64 bytes from 192.168.1.101: icmp_seq=2 ttl=64 time=54.8 ms 64 bytes from 192.168.1.101: icmp_seq=3 ttl=64 time=77.0 ms 64 bytes from 192.168.1.101: icmp_seq=4 ttl=64 time=100 ms ^C --- 192.168.1.101 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 32.193/66.193/100.717/25.463 ms adp@adp-laptop:~$ telnet 192.168.1.101 80 Trying 192.168.1.101... telnet: Unable to connect to remote host: Connection timed out commands executed in PC (192.168.1.101): adp@adp-desktop:~$ ps afx | grep http 12672 pts/4 S+ 0:00 | \_ grep --color=auto http adp@adp-desktop:~$ ping 192.168.1.102 PING 192.168.1.102 (192.168.1.102) 56(84) bytes of data. 64 bytes from 192.168.1.102: icmp_seq=1 ttl=64 time=32.1 ms 64 bytes from 192.168.1.102: icmp_seq=2 ttl=64 time=54.8 ms 64 bytes from 192.168.1.102: icmp_seq=3 ttl=64 time=77.0 ms 64 bytes from 192.168.1.102: icmp_seq=4 ttl=64 time=100 ms ^C --- 192.168.1.102 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 32.193/66.193/100.717/25.463 ms adp@adp-desktop:~$ telnet 192.168.1.102 80 Trying 192.168.1.102... telnet: Unable to connect to remote host: Connection refused adp@adp-desktop:~$ telnet 192.168.1.102 Trying 192.168.1.102... telnet: Unable to connect to remote host: Connection refused What should i do?

    Read the article

  • Why does this PHP script interfere with my CSS layout?

    - by CT
    This page uses $_GET to grab an asset id and query a mysql database and return some information. If 'id' does not match anything, no results are displayed but the page looks fine. If 'id' is null an error would occur at $id = $_GET["id"] or die(mysql_error()); When this occurs, they page layout is not displayed correctly. How do I fix this? Bonus question: How would I get a message like "No matching results found" or something when the id does not match any id in the database or is null. Thank you. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.1//EN" "http://www.w3.org/TR/xhtml11/DTD/xhtml11.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <link rel="stylesheet" type="text/css" href="style.css" /> <title>Wagman IT Asset</title> </head> <body> <div id="page"> <div id="header"> <img src="images/logo.png" /> </div> </div> <div id="content"> <div id="container"> <div id="main"> <div id="menu"> <ul> <table width="100%" border="0"> <tr> <td><li><a href="index.php">Search Assets</a></li></td> <td><li><a href="browse.php">Browse Assets</a></li></td> <td><li><a href="add_asset.php">Add Asset</a></li></td> <td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td> </tr> </table> </ul> </div> <div id="text"> <ul> <li> <h1>View Asset</h1> </li> </ul> <table width="100%" border="0" cellpadding="2"> <?php //make database connect mysql_connect("localhost", "asset_db", "asset_db") or die(mysql_error()); mysql_select_db("asset_db") or die(mysql_error()); //get asset $id = $_GET["id"] or die(mysql_error()); //get type of asset $sql = "SELECT asset.type From asset WHERE asset.id = $id"; $result = mysql_query($sql) or die(mysql_error()); $row = mysql_fetch_assoc($result); $type = $row['type']; switch ($type){ case "Server": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,server.manufacturer ,server.model ,server.serial_number ,server.esc ,server.user ,server.prev_user ,server.warranty FROM asset LEFT JOIN server ON server.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; case "Laptop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,laptop.manufacturer ,laptop.model ,laptop.serial_number ,laptop.esc ,laptop.user ,laptop.prev_user ,laptop.warranty FROM asset LEFT JOIN laptop ON laptop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; case "Desktop": $sql = " SELECT asset.id ,asset.company ,asset.location ,asset.purchase_date ,asset.purchase_order ,asset.value ,asset.type ,asset.notes ,desktop.manufacturer ,desktop.model ,desktop.serial_number ,desktop.esc ,desktop.user ,desktop.prev_user ,desktop.warranty FROM asset LEFT JOIN desktop ON desktop.id = asset.id WHERE asset.id = $id "; $result = mysql_query($sql); while($row = mysql_fetch_assoc($result)) { echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Asset ID:</td><td>"; $id = $row['id']; setcookie('id', $id); echo "$id</td></tr>"; echo "<tr<td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Company:</td><td>"; $company = $row['company']; setcookie('company', $company); echo "$company</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Location:</td><td>"; $location = $row['location']; setcookie('location', $location); echo "$location</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Date:</td><td>"; $purchase_date = $row['purchase_date']; setcookie('purchase_date', $purchase_date); echo "$purchase_date</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Purchase Order:</td><td>"; $purchase_order = $row['purchase_order']; setcookie('purchase_order', $purchase_order); echo "$purchase_order</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Value:</td><td>"; $value = $row['value']; setcookie('value', $value); echo "$value</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Type:</td><td>"; $type = $row['type']; setcookie('type', $type); echo "$type</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Notes:</td><td>"; $notes = $row['notes']; setcookie('notes', $notes); echo "$notes</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Manufacturer:</td><td>"; $manufacturer = $row['manufacturer']; setcookie('manufacturer', $manufacturer); echo "$manufacturer</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Model / Description:</td><td>"; $model = $row['model']; setcookie('model', $model); echo "$model</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Serial Number / Service Tag:</td><td>"; $serial_number = $row['serial_number']; setcookie('serial_number', $serial_number); echo "$serial_number</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Express Service Code:</td><td>"; $esc = $row['esc']; setcookie('esc', $esc); echo "$esc</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>User:</td><td>"; $user = $row['user']; setcookie('user', $user); echo "$user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Previous User:</td><td>"; $prev_user = $row['prev_user']; setcookie('prev_user', $prev_user); echo "$prev_user</td></tr>"; echo "<tr><td>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</td><td>Warranty:</td><td>"; $warranty = $row['warranty']; setcookie('warranty', $warranty); echo "$warranty</td></tr>"; } break; } ?> </table> <br /> <br /> <table width="100%" border="0"> <tr> <td>&nbsp;</td> <td>&nbsp;</td> <td>&nbsp;</td> <td><a href="#">Add Software</a></td> <td><a href="#">Edit Asset</a></td> <td><a href="#">Delete Asset</a></td> </tr> </table> </div> </div> </div> <div class="clear"></div> <div id="footer" align="center"> <p>&nbsp;</p> </div> </div> <div id="tagline"> Wagman Construction - Bridging Generations since 1902 </div> </body> </html>

    Read the article

  • PXE Boot not working

    - by Nishant
    Please explain the error in this screenshot DHCP Setting: This screenshot was taken after powering off the old comp hence he server interface is shown as the wireless card - it becomes 192.168.0.1 when I connect wires and power up the old laptop to boot via PXE. My scenario is simple. An old laptop and a new laptop . A cross over cable ( that I myself made from CAT 6 cable by cutting it and connecting 4 wires as mentioned in some doc). The new laptop ( tftp server ) has a Wirelss Card ( with which I am browsing and writing this ) . And the cable is connected between laptops . TFTP server ( new laptop details ) Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::f511:3d4a:ca01:122e%16 IPv4 Address. . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.2 Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Achilles Link-local IPv6 Address . . . . . : fe80::99b1:8ae0:9e6c:f300%11 IPv4 Address. . . . . . . . . . . : 192.168.2.3 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.2.1

    Read the article

  • Pushing DNSSEC updates with offline keys

    - by eggyal
    In a non-professional capacity, I look after the DNS of some 18 domains: mostly personal/vanity domains for immediate family. I outsource the whole shebang to an inexpensive managed hosting provider with a web interface through which I manage the zones; since the provider also offers DNSSEC, I have successfully deployed that too. These domains are so unimportant that an attack targetted against them seems much less likely than a general compromise of my provider's systems, at which point the records of all their customers might be changed to misdirect traffic (perhaps with extremely long TTLs). DNSSEC could protect against such an attack, but only if the zone's private keys are not held by the hosting provider. So, I wonder: how can one keep DNSSEC private keys offline yet still transfer signed zones to an outsourced DNS host? The most obvious answer (to me, at least) is to run one's own shadow/hidden master (from which the provider can slave) and then copy offline-signed zonefiles to the master as required. The problem is that the only machine I (want to*) control is my personal laptop, which usually connects from a typical home ADSL (behind NAT over a dynamically-assigned IP address). Having them slave from that (e.g. with a very long Expiry time on the zone for periods when my laptop is offline/unavailable) would not only require a Dynamic DNS record from which they can slave (if indeed they can slave from a named host rather than a static IP address), but would also involve me running a DNS server on my laptop and opening both it and my home network up to the incoming zone transfer requests: not ideal. I would prefer a much more push-oriented design, whereby my laptop initiates transfer of offline-signed zonefiles/updates to the provider's servers. I looked into whether nsupdate could fit the bill: documentation is a little sketchy, but my testing (with BIND 9.7) suggests it can indeed update DNSSEC zones, but only where the server holds the keys to perform the zone signing; I have not found a way to have it take an update including the relevant RRSIG/NSEC/etc. records and have the server accept them. Is this a supported use-case? If not, I suspect the only solutions which could fit the bill will involve non-DNS-based transfer of the zone updates and would welcome recommendations that are supported by (hopefully inexpensive) hosting providers: SFTP/SCP? rsync? RDBMS replication? Proprietary API? Finally, what would be the practical implications of such a setup? Key rotation is jumping out at me as being an obvious difficulty, especially if my laptop is offline for extended periods. But the zones are extremely stable, so perhaps I could get away with long-lived ZSKs**...? * Whilst I could run a shadow/hidden master on e.g. an outsourced VPS, I dislike the overhead of having to secure / manage / monitor / maintain yet another system; not to mention the additional financial costs of so doing. ** Okay, this would enable a concerted attacker to replay outdated records—but the risk and impact of such are both tolerable in the case of these domains.

    Read the article

  • iPad Impressions

    - by Aaron Lazenby
    So, I spent some quality time with my new iPad on Saturday. Here are things I like/don't like: -- Don't like that it has to sync with iTunes before you use it: I was traveling and left my laptop at home thinking I'd use this iPad thing instead. But the first thing it asked me to do is connect it to a laptop. Ugh. Had to borrow my mother-in-law's MacBook Pro just to get the iPad rolling. -- Like that magazines and newspapers are forever changed: And I think for the better...it's why I bought this thing in the first place. I spent significant time with The New York Times, The Wall Street Journal, Time Magazine and Popular Science on the iPad. Sliding stories around, jumping from section to section, enlarging images = all excellent experiences. Actually prefer iPad magazine to print, which will require a major shift in editorial strategy, summed up by Popular Science's Mark Jannot in his editor's note "What defines a magazine? Curated expertise--not paper." -- Don't like the screwy human factors: I actually enjoy the virtual keyboard (although I think I'm in the minority), but you have to hunch over to look down at what you're typing. Bad technology ergonomics have already jacked my body in various ways. The iPad just introduced a new one.-- Like the multitouch: In fact, it's awesome. Hands down. Probably will have the most lasting impact on the personal computing industry as a whole.   -- Don't like that it's heavy: If you plan to read in bed, you'd better double up on the creatine and curls. Holding this thing up on your own gets pretty uncomfortable. -- Like the Netfilx app: I wanted to watch "The Big Lebowski," so I did. That is all. -- Don't like that people feel 3G is necessary: For $30 a month? Please. I'm already accustomed to limiting my laptop internet use to readily available free wi-fi. Why do I expect anything different with the iPad? Most anyplace I have time to sit and read/use a computer (cafe, airport, you house, library, etc.) has free wi-fi. I can live without web surfing in your car. That's what the iPhone is for. -- Don't like that not everyone was ready in day one: I'm looking at you Facebook. No iPad app for launch? Lame. iPhone apps scaled-up to work on the iPad look grainy and cheap. Not a quality befitting this beautiful $700 piece of glass.Verdict: I'm bringing it to COLLABORATE 08 and seeing if I can go the whole week using only the iPad. If I can trade this thing for my laptop, I know it's a winner. For now, I'm enjoying Popular Science.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • No access to Samba shares

    - by koanhead
    I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

    Read the article

  • GIT clone repo across local file system

    - by Jon
    Hi all, I am a complete Noob when it comes to GIT. I have been just taking my first steps over the last few days. I setup a repo on my laptop, pulled down the Trunk from an SVN project (had some issues with branches, not got them working), but all seems ok there. I now want to be able to pull or push from the laptop to my main desktop. The reason being the laptop is handy on the train as I spend 2 hours a day travelling and can get some good work done. But my main machine at home is great for development. So I want to be able to push / pull from the laptop to the main computer when I get home. I thought the most simple way of doing this would be to just have the code folder shared out across the LAN and do: git clone file://192.168.10.51/code unfortunately this doesn't seem to be working for me: so I open a git bash cmd and type the above command, I am in C:\code (the shared folder for both machines) this is what I get back: Initialized empty Git repository in C:/code/code/.git/ fatal: 'C:/Program Files (x86)/Git/code' does not appear to be a git repository fatal: The remote end hung up unexpectedly How can I share the repository between the two machines in the most simple of ways. There will be other locations that will be official storage points and places where the other devs and CI server etc will pull from, this is just so that I can work on the same repo across two machines. Thanks

    Read the article

  • How to use git to manage one codebase but have different environments

    - by emostar
    I'm using git for a personal project at the moment and have run into a problem of having one codebase for two different environments and was wondering what the cleanest way to use git would be. Main Desktop I Use this machine for most of my development. I have a git repository here that I cloned off of an empty repository that I use on my internal server. I do most of my work here and push back to the internal server so I can use that as a master of truth and to ease making backups. Laptop I sometimes want to code on the road, so I did a clone from the internal server and created a new branch called "laptop-branch". Unfortunately some directories MSVC++ version are different than from the Main Desktop environment. I just modified the files in the "laptop-branch" and committed them there. Now I did a lot of changes while on vacation with my laptop, and want to push them to origin, but don't want the changes I made that were related to directories and compiler versions to be pushed back to origin. What would be the best way to get this done?

    Read the article

  • Are Chromebooks the New Netbooks, and What Does That Mean?

    - by Chris Hoffman
    Netbooks — small, cheap, slow laptops — were once very popular. They fell out of favor — people bought them because they seemed cheap and portable, but the actual experience was lackluster. Most netbooks now sit unused. Windows netbooks have vanished from stores today, but there’s a new super-cheap laptop — the Chromebook. Chromebook sales numbers are impressive, but their usage statistics tell a different story. Are Chromebooks just the new netbook? The Problem With Netbooks Netbooks seemed appealing, especially in an age before tablets and lightweight ultrabooks. You could buy a netbook for $200 or so and have a portable device that let you get on the Internet. The name “netbook” spelled that out — it was a portable device for getting on the ‘net. They weren’t really that great. The original netbook was a lightweight Asus Eee PC that ran Linux alone and had a small amount of fast flash storage. Netbooks eventually ran heavier Windows XP operating systems — Windows Vista was out, but it was just too bloated to run on netbooks. Manufacturers added slow magnetic hard drives, bloatware, and even DVD drives! They couldn’t run most Windows software very well. The build quality was poor and their keyboards were tiny and cramped. People liked the idea of a lightweight device that let them get on the Internet and loved the cheap price, but the actual experience wasn’t great. Chromebook Sales Chromebook sales numbers seem surprisingly high. NPD reported that Chromebooks were 21% of all notebooks sold in the US in 2013. If you combine laptop and tablet sales into a single statistic, Chromebooks were 9.6% of all those devices sold. That’s 2/3 as many Chromebooks sold as iPads in the US! Of Amazon’s best-selling laptop computers, two of the top three are Chromebooks. These definitely look like successful products. Unlike netbooks, Chromebooks are taking off in a big way in the education market. Many schools are buying Chromebooks for their students instead of more expensive Windows laptops. They’re easier to manage and lock down than Windows laptops, but — more importantly for cash-strapped schools — they’re very cheap. Netbooks never had this sort of momentum in schools. Chromebook Usage Statistics Here’s where the rosy picture of Chromebooks starts to become more realistic. StatCounter’s browser usage statistics show how widely used different operating systems are. For example, Windows 7 has the highest share with 35.71% of web activity in April, 2014. The chart doesn’t even show Chrome OS at all, although there is an “Other” number near the bottom. Click the Download Data link to download a CSV file and we can view more detailed information. Chrome OS only accounted for 0.38% of web usage in April, 2014. Desktop Linux, which people often shrug at, accounted for 1.52% in the same month. To its credit, Chrome OS usage has increased. Chromebooks were widely mocked back in November, 2013 when the sales numbers came out. After all, they only accounted for 0.11% of web usage globally in November, 2013! But Chrome OS numbers have been improving: Nov, 2013: 0.11% Dec, 2013: 0.22% Jan, 2014: 0.31% Feb, 2014: 0.35% Mar, 2014: 0.36% Apr, 2014: 0.38% Chrome OS is climbing, but it’s definitely still in the “Other” category. It isn’t as high as we’d expect to see it with those types of sales numbers. Chromebooks vs. Netbooks Chromebooks are more limited devices than traditional PCs. You can do quite a few things, but you have to do it all using Chrome or Chrome apps. Most people won’t be enabling developer mode and installing a Linux desktop. You don’t have access to the powerful desktop software available for Windows and even Mac OS X. On the other hand, these Chromebooks are less compromised than netbooks in many ways. They come with a lightweight operating system designed for portable, mobile devices. They don’t come packed with any bloatware, like the bloatware you’ll find on competing Windows PCs and the original netbooks. They’re cheaper because the manufacturer doesn’t have to pay for a Windows license. There’s no need for antivirus software weighing the operating system down. They’re larger than the original netbooks, with many of them being 11.6-inches instead of the original 8-inch bodies many older netbooks came with. They have larger, more comfortable keyboards and fast solid-state storage. Really, Chromebooks are what netbooks wanted to be. People didn’t buy netbooks to use typical Windows software — they just wanted a lightweight PC. Of course, for many people, the real successor to netbooks is tablets. If all you want is a portable device to throw in a bag so you can get online, maybe a tablet is better. Where Does This Leave Chromebooks? So, are Chromebooks the new netbooks? It’s a bit early to answer that question. Chromebooks are definitely not out of the competition — their sales look good and their usage share is increasing. On the other hand, Chrome OS is still pretty far behind. They’re not catching fire like tablets did. Maybe netbooks were just before their time and Chromebooks were what they were always meant to be. Just as Microsoft’s Windows XP tablets failed, Windows XP netbooks also failed. Tablets took off with a more refined operating system on better hardware years later. “Netbooks” — or Chromebooks — are now taking off with a more purpose-built operating system on better hardware, too. It’s hard to count Chromebooks out because they provide a much better experience than netbooks ever did. If you’re one of the people who wants to use old Windows desktop apps on your portable laptop, you may think netbooks were better — but most people don’t want that. But maybe people either want a full desktop PC experience or a full mobile tablet experience. Is there a place for a laptop with a keyboard that can only view websites? We’ll have to wait and see. Image Credit: Kevin Jarret on Flickr, Clive Darra on Flickr, Sean Freese on Flickr

    Read the article

< Previous Page | 93 94 95 96 97 98 99 100 101 102 103 104  | Next Page >