Search Results

Search found 8298 results on 332 pages for 'laptop'.

Page 95/332 | < Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >

  • Check SSD stability before returning it as broken?

    - by data_jepp
    I have the Transcend SSD 720 256GB 2,5" 7mm disk. And randomly I get disk IO in utorrent and large files copying to external will fail. I have removed it from my laptop since I need max stability. I use my laptop on exams. How can I really bench/make-it-sweat whilst connected to my desktop? I want to re-create some of the fails as I need proof if I am to return it. Firmware is updated. BIOS on laptop is updated. I could just completely nul the disk and then check for bad sectors, but is there anything else I could use for testing? Edit: It has 7 bad sector replacement operations. What does it mean?

    Read the article

  • Does Asus F8SV supports 1920*1080 resolution through DVI output? [closed]

    - by Col
    Devices: Asus F8Sv Laptop (Windows 7 ultimate, GeForce 8600m GT, display driver is 301.42, detected and downloaded from nvidia.com, VGA and DVI output interface) Gateway 23 inches LCD monitor (VGA, DVI-D with HDCP, and HDMI input) 18 pins DVI cable, VGA cable, both new. Problems: When connect laptop to monitor by VGA, resolution is automatically adapted to 1920*1080; but when using DVI connection, resolution on monitor is fixed to 1024*768, which is lower than my laptop default 1280*800. The maximum resolution in windows control panel is only 1024*768, while the Nvidia control panel provides options 1920*1080p and 1920*1080i, but clicking apply button does not work, the resolution just can not change. Possibly reason I guess: GeForce 8600m GT does not support 1920*1080 resolution through DVI outputs. Can anyone confirm it or give the real reason? edit: Problem solved by buying a HDMI to DVI-D adapter. Using this adapter and a HDMI cable, I can now enjoy 1080p movie.

    Read the article

  • Large recovery partitions

    - by Unsigned
    Is there any good reason as to why factory restore partitions are generally much larger than they need to be? Examples I have found in my own experience: Dell XPS laptop Partition: 13.67 GB Used: 6.68 GB Dell Inspiron laptop Partition: 14.7 GB Used: 7.2 GB Toshiba laptop Partition: 15.3 GB Used: 9 GB In all cases, shrinking the partition to only slightly more than the Used space had no ill effects on future factory restorations. Why the exorbitant amount of extra space, given that neither of the three computers ever writes any data to the recovery partition? Is there a good reason I'm overlooking?

    Read the article

  • apache2: Could not open configuration file /etc/apache2/apache2.conf: Permission denied

    - by AntonChanning
    I recently upgraded Ubuntu to the latest LTS edition on my work laptop, which I use as a LAMP development platform. The upgrade was from 12.4 to 14.4. Now I'm having trouble getting apache up and running again. Here is the output from an attempt: antonc@antonc-laptop:/etc/apache2$ sudo service apache2 restart * Restarting web server apache2 * The apache2 configtest failed. Output of config test was: apache2: Could not open configuration file /etc/apache2/apache2.conf: Permission denied Action 'configtest' failed. The Apache error log may have more information. Here is a list of permissions and ownership in /etc/apache, showing that apache2.conf is currently owned by root with permissions 644. I changed this temporarily to 777, but this made no difference, so I changed it back to 644. antonc@antonc-laptop:/etc/apache2$ ls -l total 80 -rw-r--r-- 1 root root 7115 Jan 7 2014 apache2.conf ... What do I need to do to get apache running again? Is the problem really with apache2.conf or some other setting? Should the conf file be owned by a user other than root?

    Read the article

  • Bluetooth not working on an Alienware m14x r2

    - by S. L.
    on my alienware m14x r2 laptop with ubuntu 12.04.1 x64, the bluetooth interface is not working. WLAN works fine. I have a dualboot install with ubuntu & win 7 on this laptop. In win 7, the bluetooth interface works fine, because its all activated in BIOS. I have the killer wireless-n 1202 a/g/n interface with integrated bluetooth 4.0 in this laptop. Here is some code : sudo rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 064e:8128 Suyin Corp. Bus 002 Device 003: ID 0cf3:3004 Atheros Communications, Inc. Bus 002 Device 004: ID 187c:0521 Alienware Corporation dmesg | grep "Bluetooth" [ 2.590377] Bluetooth: Core ver 2.16 [ 2.590395] Bluetooth: HCI device and connection manager initialized [ 2.590397] Bluetooth: HCI socket layer initialized [ 2.590399] Bluetooth: L2CAP socket layer initialized [ 2.590403] Bluetooth: SCO socket layer initialized [ 2.591518] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.591519] Bluetooth: BNEP filters: protocol multicast [ 2.599411] Bluetooth: RFCOMM TTY layer initialized [ 2.599415] Bluetooth: RFCOMM socket layer initialized [ 2.599416] Bluetooth: RFCOMM ver 1.11 [ 2.696552] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 2.696751] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 2.702607] Bluetooth: Configuration file not found ar3k/ramps_0x11020000_40.dfu [ 2.702609] Bluetooth: Loading sysconfig file failed Any ideas to fix that problem ?

    Read the article

  • Grub not showing on startup for Windows 8.1 Ubuntu 13.10 Dual boot

    - by driftking96
    K im so a newbie to Ubuntu and i bought a Windows 8 pre-installed laptop last month. I updated to Windows 8.1 and then i thought about installing Ubuntu as a dual boot so i could mess around and learn more about it. So i followed a Youtube tutorial ( http://www.youtube.com/watch?v=dJfTvkgLqfQ ). And i got my stuff working fine. The first few times i booted i got the GRUB menu instead of my default HP Boot OS Manager, and i was able to select my OS. So i went to sleep and the next day i turned on my computer and the GRUB menu did not show up. I tried several times and it didnt automatically show up. In order for me to see the GRUB menu i had to turn on my PC and on start had to press ESC to pause startup and press F9 to get boot options. Then from there i had to pick from OS Boot, Ubuntu, Ubuntu (Yes there were two Ubuntus available) and a default EFI file thingy. When i click the first Ubuntu i get the GRUB Menu (I was too scared to try the second incase i screwed my laptop up) and i can safely load Ubuntu from there and use it (although i do have to increase my brightness everytime i load Ubuntu bec it somehow reduces my brightness to complete darkness on boot) So my problem here is why isnt my GRUB showing on boot, after it worked on the first day? I was on Windows 8.1 while typing this and if you have any questions or answers, i will happily answer or use them as a solution to the best of my abilities. BTW my laptop is a HP TouchSmart j-078CA.

    Read the article

  • Friday Tips #33

    - by Chris Kawalek
    Happy Friday, everyone! Our tip this week is from an excellent white paper written by our own Greg King titled Oracle VM 3: Building a Demo Environment using Oracle VM VirtualBox. In it, Greg gives you everything you need to know to set up Oracle VM Server inside of Oracle VM VirtualBox for testing and demoing. The section we're highlighting below is on how to configure the network interfaces of your virtual machines: VirtualBox comes with a few different types of network interfaces that can be used to allow communication between the VM guests and the host operating system, including network interfaces that will allow the VM guests to communicate with local and wide area networks accessed from your laptop or personal computer. However, for the purpose of the demonstration environment we will limit the network communication to include access just between your desktop and the virtual machines being managed by VirtualBox. The install process for Oracle VM VirtualBox creates a single host-only network device on your laptop or personal computer. Using the host-only network device will allow you to open a browser on your desktop to access the Oracle VM Manager running within the VirtualBox VM guest. The device will only allow network traffic between the VM guests and your host operating system, but nothing outside the confines of your laptop or personal computer. We will need to add a second host-only network since the Oracle VM Server appliance has both eth0 and eth1 configured. You can choose to use eth1 on the Oracle VM Servers or not use them – the choice is yours. But, at least the host side network device will exist if you decide to use it. Greg goes on to describe in detail how to setup the network interfaces, so you can head on over to the paper and get even more info. See you next week! -Chris 

    Read the article

  • Ubuntu one, music streaming

    - by iknowshall
    I'm running Ubuntu 11.10, and just signed up for Ubuntu One and Ubuntu One Music. Generally file sync is working fine, but music has been a complete failure so far. Here's what I'm looking at: After 24 hours, not a single mp3 or ogg file from my laptop has sync'd to the Cloud Music folder. I have 4 gigs of data used, which is definitely not enough to include music files. That's about the right amount for my docs and photos. With music, it should be more like 13 gigs. No music shows up on the Ubuntu One Music app on my phone, nor on the web view of my Ubuntu One Cloud folder I followed all the online instructions I could find. Basically, on my laptop, right click on the Music folder and select "Ubuntu One Synchronize this folder" The Music folder now has a green check mark on it indicating its sync'd The Ubuntu One app on my laptop says "File Sync is up to date" I did provide credit card information, and on the Ubuntu One website "Music Streaming" is listed as one of my services. So what am I doing wrong? Just read this post as I'm experiencing the same problem, the answer for this post says that due to the large number of files trying to be uploaded, that it could take up to a week. However I am, as above also being told that "File sync is up to date" Can somebody confirm that this is a bug and that I just need to wait for File sync to actually be up to date? Cheers

    Read the article

  • High load (and high temp) with idle processes

    - by Nanne
    I've got a semi-old laptop (toshiba satellite a110-228), that's appointed 'laptop for the kids' by my sister. I've installed ubuntu netbook (10.10) on it because of the lack-of memory and it seems to work fine, accept from some heat-issues. These where never a problem under windows. It looks like I've got something similar to this problem: Load is generally 1 or higher, sometimes its stuck at 0.80, but its way to high. Top/htop only show a couple of percentage CPU use (which isn't too shocking, as i'm not doing anything). At this point all the software is stock, and i'd like to keep it that way because its supposed to be the easy-to-maintain kids computer. Now I'd like to find out: What could be the cause of the high load? Could it be as this thread implies, some driver, are there other options to check? How could I see what is really keeping the system hot and bothered? How to check what runs, etc etc? I'd like to pinpoint the culprint. further steps to take for debugging? The big bad internet leads me to believe that it might be the graphics drivers. The laptop has an Intel 945M chipset, but that doesn't seem to be one of the problem childs in this manner (I read a lot abotu ATI drivers that need special isntall). I'd not only welcome hints to directly solve this (duh) but also help in starting to debug what is going on. I am really hesitant in installing an older kernel, as I want it to be stock, and easy upgradeable (because I don't live near it, it should run without me ;) ) As an afterthought: to keep the whole thing cooler, can I 'amp up' the fancontrol? Its only going "airplane" mode when the computer is 95 Celcius, which is a tad late for my taste. Top: powertop:

    Read the article

  • Stable ubuntu distribution for a broadcom bcm4313 wireless driver and an nvidia 630 graphics adapter

    - by Vivek Pradhan
    I have been trying to completely shift to ubuntu or a linux distro for almost 2 years now. I have tried all the ubuntu distros starting from 10.04 through 11.10, but there has always been some bugs with the display drivers or the wireless cards not being recognised and the additional drivers suggested from the ubuntu community not doing the trick always. I tried a lot to fix bugs, checked a lot of forums, launch pad, got some of them fixed, but could not really get a neat and complete ubuntu machine set up till now. Now I really like the whole open source community and the linux platform, my pc at home runs ubuntu 11.04 perfectly but there have been some glitches always with ubuntu on my laptop that has forced me to stick with windows only. Now I am currently on an hp dv6 laptop that has the broadcom bcm4313 wireless driver and the nvidia 630gtm graphics(optimus) driver. Now I tried to do some research on the support of these drivers in linux machines but could not get anywhere. So I would really appreciate if you guys could suggest some linux distro that I could use that has full support of these drivers or has stable bug fixes for these kind of issues. I tried precise pangolin (LTS) through a live CD but i still see a problem with wifi networks which is a little frustrating. Please help me find the perfect match for my laptop :P I would gladly provide any other information necessary.

    Read the article

  • How to create an Ubuntu 12.10 live CD?

    - by B Biswas
    I downloaded the Ubuntu 12.10 installer from Ubuntu website. However, I find that it is not an iso image and I am unable to create a live CD (or DVD) from it. I could not find any help from Ubuntu website as well as internet. Please help. PS - My OS is Windows XP. The Ubuntu installer I downloaded from Ubuntu website is a zip file. I unzipped the file and it has a wubi file. PS - Thanks. I could create a Live CD. 1) First I tried to do it in my laptop which has Win 7. It was showing the Ubuntu installer as a zip file and could not able to burn it in to a DVD. At that time I raised the question. 2) Later I copied the installer in my desktop which has Win XP. There the installer is shown as an ISO file and I burnt it in to a DVD and created the Live CD. This is working nicely in the the desktop. 3) I tried to run the Live Cd in my Laptop which is an AMD machine, the system does not boot up. 4) In my office desktop which has Win 7 the Ubuntu installer is showing as an ISO file. My questions are as follows: A) Why the Ubuntu installer file is showing differently in different machines? B) Why the Live CD is not working in my Laptop?

    Read the article

  • Ubuntu 12.04 LTS , Dell d410 output to External Monitor/TV with docking

    - by Gck
    I am not able to see the video output on My external monitor/TV after installing 12.04 LTS. I had the same issue with 11 versions also. This issue does not happen on 10.04 LTS version. This is my setup. Dell latitude D410 with Intel Mobile 915 GM/910GML express controller using the Dell docking station Connecting to my 42inch TV with DVI (from Docking) to HDMI cable (on TV) If i close the lid, some times i am able to see the video output on TV, but the resolution is making the fonts so small, i cannot even see it and when i click displays option to change the resolution, the output goes off completely and it is shown now on the laptop screen. one time, i got the output on both the screens, but i am not able to replicate that scenario even after trying the Fn+F8 key option on my laptop. earlier some time back when i ran version 11.x ubuntu, i was able to get the output on both the screens (basically mirrored output) with large font resolution on my TV using the monitor Test tool as mentioned here :http://www.bigfatostrich.com/2011/05/solved-ubuntu-11-04-broken-external-display/ The problem with this approach is that i have to do it every time i restart the machine and more over the video output is present on both the screens (mirrored), which is of no use. As i stated before, this does not happen with 10.04 LTS. With 10.04 LTS my laptop screen is off automatically and the output is seen on TV/external display. Can anyone share any options that i can try? How can we achieve the behavior of 10.04 LTS with respect to the External display on 12.04 LTS . Thankyou very much for your help in advance.

    Read the article

  • Bluetooth adapter turned from working fine to unrecognized

    - by easoncxz
    i had been using bluetooth fine, with devices working, but today when i turned on my computer again bluetooth strangely failed. there is a bluetooth icon on the top bar, showing "bluetooth on", but if i click on the "bluetooth settings" item, a system settings window shows up and shows me a bluetooth on-off switch which is disabled (i.e. fixed to off). more information about my case: i am a new linux used, coming from windows, and do not know supposedly-obvious commands. i am using a laptop. it initially doesn't have bluetooth. i bought a built-in type (instead of USB type) bluetooth module, and added it inside the laptop. hence, i do not have a specific FN+* key for bluetooth. in windows, i needed to install an additional driver that was intended for other machines in my laptop's seires which have built-in (i.e. factoryly built-in)j bluetooth modules. the Fn+* key seemed to only affect wifi under ubuntu. i have been successfully using magicmouse with my later-added built-in bluetooth module/adapter on both windows and ubuntu i have been trying to tweak the magicmouse scrolling speed with commands rmmod something, modprobe hid_magicmouse --scroll_speed=45 --scroll_acceleration=30 or something, then added a file `/etc/modprobe.d/magicmouse.conf". the mouse seemed to be working fine with these changes. now if i run commands like hcitool dev, the shell tells me that i do not have any "Devices" or "adapters". i seem to have bluez installed, because when i type "blue" then tab-autocomplete, a bunch of commands like bluez-test-device pops up. -- update -- some commands and their results: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool dev Devices: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool scan Device is not available: No such device easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

    Read the article

  • cannot get upstart to run user job

    - by dre
    I am trying to get upstart start a user job during the boot of my machine. I have my conky.conf upstart config file in my $HOME/.init directory. Wenn I run "start conky" I get this error: dre@dre-laptop:~$ start conky start: Rejected send message, 1 matched rules; type="method_call", sender=":1.76" (uid=1000 pid=2843 comm="start conky ") interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") dre@dre-laptop:~$ I (think I) know that this error has to do with the d-bus system (authentification). I also read (http://upstart.ubuntu.com/cookbook/#id96) that ubuntu 12.10 already has the right configuration in the d-bus config file "/etc/dbus-1/system.d/Upstart.conf" to allow normal users to use upstart. dre@dre-laptop:~/.init$ cat conky.conf description "conky, a system monitor appled" start on lightdm stop on shutdown # Automatically restart process if crashed respawn # Essentially lets upstart know the process will detach itself to the background #expect fork # Start conky exec /usr/bin/conky So, who knows, what do I do wrong??? greetings Andre No one??? Please... give me your best shot.

    Read the article

  • Keyboard freezes / stuck if a key pressed repeatedly

    - by Aziz Rahmad
    I use Acer 4530. This problem has happened long since Ubuntu 10.10 and now that I use 11.04 dual booted with Linux Mint 10. Everytime I press one key repeatedly, like when I read a long article in a website/ebook or when I play games which required me to press arrow keys repeatedly, it would randomly freeze. That is, whatever I press on keyboard has no effect, and that also happens with touchpad. However, the USB mouse works just fine. I later found out that it's not actually freeze but more like it's like the key stuck. For example when I play tetris which I usually press w (down) button repeatedly, after some times it would freeze. And if I put the cursor in, say, browser's address bar, it would type "wwww....." infinitely. The only way I could fix it is by suspend the laptop, either by using mouse or by closing the lid. And instead of suspended, in that case the laptop would automatically wake up and everything will be fine. (Usually my laptop would wake up after suspended by pressing any key) It has happened since the first time I use Ubuntu, 10.10, and it also happens in Linux Mint 10, and until now in Ubuntu 11.04. It never happened when I use Windows, though. Anyone has ever encounter similar problem? Anyone know how to fix it permanently?

    Read the article

  • HDMI video output not working for external monitor

    - by user291852
    I have installed from scratch ubuntu GNOME 14.04 with gnome-flashback on my old HP HDX 16 laptop (core 2 duo p8600 + nvidia GT9600M + 4GB of ram) and I have problems with the HDMI output (I use it to extend my desktop on a dell U2412M 1920x1200 monitor). In the following I summarize the configurations that I have tried: Using the open source nouveau drivers, only the laptop monitor works, no signal from the external monitor connected to the HDMI output. However, the output of the xrandr command show that the HDMI output is connected with the correct resolution 1920x1200 (I find this thing really weird). Nouveau drivers with VGA connection works without problems on the external monitor, but the image is blurry compared to the HDMI connection. Using the nvidia drivers (I have tried different versions: nvidia-331-updates and the xorg-edgers versions nvidia-334 and nvidia-337) the HDMI output works, but I have system instabilities, random crashes and display freezes. I can't even enter in terminal mode with ctrl-alt-f1, so I have to manually shut down the laptop with the power button. I really would like to use the HDMI output with the nouveau drivers to avoid the system instabilities that I experienced with the nvidia drivers, but I can't figure out how to make it works. Alessandro

    Read the article

  • How do I restore a backup of my keyring (containing ssh key passprases, nautilus remote filesystem passwords and wifi passwords)?

    - by con-f-use
    I changed the disk on my laptop and installed Ubuntu on the new disk. Old disk had 12.04 upgraded to 12.10 on it. Now I want to copy my old keyring with WiFi passwords, ftp passwords for nautilus and ssh key passphrases. I have the whole data from the old disk available (is now a USB disk and I did not delete the old data yet or do anything with it - I could still put it in the laptop and boot from it like nothing happend). The old methods of just copying ~/.gconf/... and ~/.gnome2/keyrings won't work. Did I miss something? 1. Edit: I figure one needs to copy files not located in the users home directory as well. I copied the whole old /home/confus (which is my home directory) to the fresh install to no effect. That whole copy is now reverted to the fresh install's home directory, so my /home/confus is as it was the after fresh install. 2. Edit: The folder /etc/NetworkManager/system-connections seems to be the place for WiFi passwords. Could be that /usr/share/keyrings is important as well for ssh keys - that's the only sensible thing that a search came up with: find /usr/ -name "*keyring* 3. Edit: Still no ssh and ftp passwords from the keyring. What I did: Convert old hard drive to usb drive Put new drive in the laptop and installed fresh version of 12.10 there Booted from old hdd via USB and copied its /etc/NetwrokManager/system-connections, ~/.gconf/ and ~/.gnome2/keyrings, ~/.ssh over to the new disk. Confirmed that all keys on the old install work Booted from new disk Result: No passphrase for ssh keys, no ftp passwords in keyring. At least the WiFi passwords are migrated.

    Read the article

  • Two equal items in alternatives list

    - by Red Planet
    I want to have two JDKs. The first one was installed a long time ago to /usr/lib/jvm/java-7-oracle/. I installed the second version and executed following commands to add it to alternatives: red-planet@laptop:~$ sudo update-alternatives --install "/usr/bin/java" "java" "/opt/java_1.6.0_35/bin/java" 2 update-alternatives: using /opt/java_1.6.0_35/bin/java to provide /usr/bin/java (java) in auto mode. red-planet@laptop:~$ sudo update-alternatives --install "/usr/bin/javac" "javac" "/opt/java_1.6.0_35/bin/javac" 2 update-alternatives: using /opt/java_1.6.0_35/bin/javac to provide /usr/bin/javac (javac) in auto mode. red-planet@laptop:~$ sudo update-alternatives --install "/usr/bin/javaws" "javaws" "/opt/java_1.6.0_35/bin/javaws" 2 update-alternatives: using /opt/java_1.6.0_35/bin/javaws to provide /usr/bin/javaws (javaws) in auto mode. And configured: There are 2 choices for the alternative java (providing /usr/bin/java). Selection Path Priority Status ------------------------------------------------------------ * 0 /opt/java_1.6.0_35/bin/java 2 auto mode 1 /opt/java_1.6.0_35/bin/java 2 manual mode 2 /usr/lib/jvm/java-7-oracle/bin/java 1 manual mode Press enter to keep the current choice[*], or type selection number: Why do I have two equal items in the list?

    Read the article

  • How can create the smallest possible mirror of the archive?

    - by Registered User
    I need to create an http url at my laptop to have a Ubuntu installation begin within my laptop on a Xen environment. This is how the final thing will look like. The host and client are both going to be my laptop, I Googled and came across apt-mirror and some other packages. I do not want to archive entire 15 GB Ubuntu repositories on my machine. It is not possible to use a CD,ISO,loop mounted disk (reason mentioned below). I have tried using netboot image on local machine which failed because if you are attempting to create a virtual machine on a hardware which does not support VT virt-manager installer necessarily needs a URL of this sort http://archive.ubuntu.com/ubuntu/dists/hardy/main/installer-i386/current/images/netboot/ Any other option to create guest OS is simply grayed out. The unfortunate part is my Ethernet connections do not work when I boot with Xen-4.0 and a pv-ops Dom0 kernel from Jeremy's tree. Which is where I have to do this work. So I have to create a URL structure which is similar to Ubuntu mirrors. So how can I do this in bare minimum so that at least the console boots and once the console comes I can do some work.

    Read the article

  • How to reduce the fan noise and how to increase battery life?

    - by mehdi
    I have a brand new Sony Vaio S series laptop.(VPCSA2DGX) It came factory installed with Windows 7 professional Edition 64bit. Runs Intel core i5, 500 GB HDD , 4GB Ram. First I installed ubuntu 11.10 64 bit along side Windows to dual boot. Later,since the problem did not solve, I installed ubuntu 12.04 64bit along side Windows to dual boot. However the problem keeps annoying me. Problem: When running ubuntu 11.10/12.04, the battery lasts only about 1.5 hours. The Fan runs loud and continuously. And there is a lot of heat generated. System monitor shows less than 5% CPU used. My laptop enjoys hybrid graphic and I tried turning off ADM graphic card and keep Intel graphic card on. However I can not get the Fan noise or heat to go away and consequently the battery drain continues. BTW, in windows, the laptop gives 4-5 hours of battery power, Fan is silent and there is no heat problem. Any ideas on how to reduce the fan noise and how to increase battery life in ubuntu 11.10/12.04?

    Read the article

  • WiFi is not detecting in compaq presario c700

    - by charan
    Hi I have a Compaq Presario c700 laptop,I just installed Ubuntu 10.04 in my laptop. My wireless networks are not showing in network manager. charan@charan-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) 00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) 00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) 00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) 00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) 00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) 00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 03) 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) 01:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 02) 02:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)

    Read the article

  • Keyboard freezes / stuck if a key pressed repeatedly

    - by Aziz Rahmad
    I use Acer 4530. This problem has happened long since Ubuntu 10.10 and now that I use 11.04 dual booted with Linux Mint 10. Everytime I press one key repeatedly, like when I read a long article in a website/ebook or when I play games which required me to press arrow keys repeatedly, it would randomly freeze. That is, whatever I press on keyboard has no effect, and that also happens with touchpad. However, the USB mouse works just fine. I later found out that it's not actually freeze but more like it's like the key stuck. For example when I play tetris which I usually press w (down) button repeatedly, after some times it would freeze. And if I put the cursor in, say, browser's address bar, it would type "wwww....." infinitely. The only way I could fix it is by suspend the laptop, either by using mouse or by closing the lid. And instead of suspended, in that case the laptop would automatically wake up and everything will be fine. (Usually my laptop would wake up after suspended by pressing any key) It has happened since the first time I use Ubuntu, 10.10, and it also happens in Linux Mint 10, and until now in Ubuntu 11.04. It never happened when I use Windows, though. Anyone has ever encounter similar problem? Anyone know how to fix it permanently? UPDATE I just recently installed Windows 7 and Windows 8 Development Preview and both have similar symptoms. So I declare that this problem is not OS specific, probably hardware problem.

    Read the article

  • How do I prevent my filesystems from being mounted read-only after suspending?

    - by Chas. Owens
    I have Ubuntu 12.04 installed on an SDHC card (only one ext2 partition, no swap). When I suspend using pm-suspend, my root filesystem is mounted read-only. I am currently "fixing" this with the following file: /etc/pm/sleep.d/99_make_disk_rw: #!/bin/sh mount -o remount,rw / But the disk is marked as needing an fsck on reboot. How can I prevent the filesystem from being mounted read-only or whatever is going wrong here. Update: It looks like it is getting mounted read-only because an error occurred. I have changed the mount options for / in /etc/fstab to noatime,nodiratime,errors=continue and it no longer mounts the SDHC card as read-only after it resumes. So the problem is happening when it suspends, not when it resumes as I had thought. I checked /sys/bus/usb/devices/1-4/power/persist and it is set to 1. So the SDHC card shouldn't appear disconnected to the OS (or more accurately it should recover from the disconnection without error). Here seems to be the relevant section of the syslog Sep 10 10:34:23 iubit kernel: [ 748.246226] sd 4:0:0:0: [sdb] Media Changed Sep 10 10:34:23 iubit kernel: [ 748.246234] sd 4:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Sep 10 10:34:23 iubit kernel: [ 748.246243] sd 4:0:0:0: [sdb] Sense Key : Unit Attention [current] Sep 10 10:34:23 iubit kernel: [ 748.246253] Info fld=0x0 Sep 10 10:34:23 iubit kernel: [ 748.246258] sd 4:0:0:0: [sdb] Add. Sense: Not ready to ready change, medium may have changed Sep 10 10:34:23 iubit kernel: [ 748.246271] sd 4:0:0:0: [sdb] CDB: Read(10): 28 00 00 5d 3e f0 00 00 08 00 Sep 10 10:34:23 iubit kernel: [ 748.246291] end_request: I/O error, dev sdb, sector 6110960 Sep 10 10:34:23 iubit kernel: [ 748.247027] EXT2-fs (sdb1): error: ext2_fsync: detected IO error when writing metadata buffers Sep 10 10:34:23 iubit anacron[6954]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:23 iubit anacron[6954]: Normal exit (0 jobs run) Sep 10 10:34:24 iubit laptop-mode: Laptop mode Sep 10 10:34:24 iubit laptop-mode: enabled, not active Sep 10 10:34:24 iubit kernel: [ 749.055376] sd 4:0:0:0: [sdb] No Caching mode page present Sep 10 10:34:24 iubit kernel: [ 749.055387] sd 4:0:0:0: [sdb] Assuming drive cache: write through Sep 10 10:34:25 iubit anacron[7555]: Anacron 2.3 started on 2012-09-10 Sep 10 10:34:25 iubit anacron[7555]: Normal exit (0 jobs run) Sep 10 10:34:31 iubit kernel: [ 756.090861] EXT2-fs (sdb1): previous I/O error to superblock detected

    Read the article

  • Attempting to install netgear N300 Wireless USB Adapter on Ubuntu without a present internet connection

    - by Liz
    Hello Linux/Ubuntu world out there. I don't have internet presently on the desktop I am trying to install the USB wireless adapter on. This seems to be the problem, which if the hardware would work would theoretically fix the problem. I can NOT access the internet via anything but wireless. I am presently on my laptop searching for answers while trying to install this little device. So any advice will have to take that into account. Now I have tried so far, using WINE which does not want to work, I have tried Windows Wireless Drivers which doesn't want to work, I have tried Software Sources, Other Software and it will not acknowledge the cdrom as a repository stating errors like E:Unable to stat the mount point /cdrom/ -stat (2: No such file or directory) However I can open the CD icon on my computer and access and browse the files. The computer can read the CD. I can read the CD. I've tried just plugging it in and seeing if the computer will automatically recognize the hardware, and go from there. That does not work either. I have tested USB port to just verify that the USB port works. It does. My laptop recognizes the hardware, and would easily install the software if I prompted it to. The difference is that my laptop is Vista, and I HATE Vista. Any tips, tricks?

    Read the article

  • High Power Consumption and Wakeups on my Asus X54H with 12.04

    - by Marogian
    So I've been using powertop to try and reduce the power consumption on my laptop as I only seem to get about 3 hours of battery. From reading other threads on here it seems my power consumption and wakeups are strangely high, here's a summary: The battery reports a discharge rate of 10.2 W Summary: 651.8 wakeups/second, 0.0 GPU ops/second and 0.0 VFS ops/sec The things which stand out as odd: 1.31 W 4.0 ms/s 166.7 Interrupt PS/2 Touchpad / Keyboard / Mouse So more than 10% of my battery is being consumed by my touchpad/keyboard? That doesn't seem right. 548 mW 34.3 ms/s 45.9 Process compiz 5% from Compiz. Is this correct? 376 mW 1.8 ms/s 47.5 Interrupt [51] i915 298 mW 1.4 ms/s 37.7 Timer tick_sched_timer Another few percent from these things- not quite sure what they are. For reference I've installed Laptop Mode Tools, Jupiter (on power save), the CPU governor is definitely on powersave and brightness is on minimum. What else can I do/Any ideas? I've seen other posts on here reporting laptop battery lives of ~8 hours and power consumption of 4W rather than my 10W... Thanks!

    Read the article

< Previous Page | 91 92 93 94 95 96 97 98 99 100 101 102  | Next Page >