Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 98/170 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

  • Streaming to PS3 with NAS and built-in dlna server?

    - by philt
    With consumer-grade hardware, is it possible to successfully stream 1080p mp4 videos to a PS3? I have a linksys router that can only do 10/100. The PS3 is wired to it with cat5e cable, and the PS3 itself supports gigabit ethernet. I would upgrade the router and get one that supports gigabit ethernet if it could handle streaming like this. It currently does work with minor jerkiness streaming from my mac to the PS3, but fast-forward/reverse and "goto" (equivalent of scene selection) take forever and/or fail completely. And streaming from my mac of course requires the mac to be on at all times. When I put the movies on an external USB drive and connect to the PS3 directly, it performs flawlessly. Fast forward and everything works great. So I was thinking about getting a NAS, but I don't know if any inexpensive NAS (i.e. Buffalo Linkstation Live, WD My Book World Edition, D-Link DNS-321, etc.) can actually deliver the performance necessary to do this, even with gigabit ethernet?

    Read the article

  • Changing Mac OS X 10.6 Routing after VPN'd In

    - by Matt Rogish
    I have a coffee shop around the corner that I use to do some work when I want to get away from home. They offer free wi-fi and I then use my Mac 10.6 VPN to log into my work network. I have "Send all traffic over VPN connection" checked. Before, their network was 10.0.0.x. I think they got a new router because it's now 192.168.2.x However, this interferes with one of the subnets at work so now I can't visit 192.168.2.x at work. So: 1) Office network: VPN gives IPs as 192.168.1.x. Another network is 192.168.2.x 2) Coffee network: Gives IPs as 192.168.2.x I think if I set a route to send all 2.x traffic over the tunnel, it would blow up my routing to their system, right? What should I do? I know the individual IPs of the servers I want... Maybe I could add each one, or can I add all of them minus the default gateway of their router? How do I set that up "temporarily" in my Mac? Thanks!!

    Read the article

  • How to configure VirtualBox server for performance at home

    - by BluJai
    I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

    Read the article

  • Why my 2nd ip from traceroute is not answering the ping anymore?

    - by Pedro77
    My Internet is really laggy today, I did a tracerout and I realize that I'm having no answer from an ip at the beginning of the traceroute. see: Tracing route to 12.129.202.154 over a maximum of 30 hops 1 <1 ms <1 ms <1 ms 192.168.0.1 2 * * * Request timed out. 3 8 ms 8 ms 8 ms bd044008.virtua.com.br [189.4.64.8] 4 9 ms 8 ms 8 ms bd044009.virtua.com.br [189.4.64.9] 5 26 ms 26 ms 24 ms embratel-T0-1-5-0-tacc01.cas.embratel.net.br [200.174.243.21] 6 360 ms 15 ms 12 ms ebt-T0-15-0-12-tcore01.ctamc.embratel.net.br [200.244.140.218] 7 330 ms 349 ms 261 ms ebt-Bundle-POS11942-intl04.mianap.embratel.net.br [200.230.220.10] 8 139 ms 141 ms 139 ms sl-st30-mia-.sprintlink.net [144.223.64.221] Connection diagram: PC - Router configured as access point - Router (192.168.0.1) - Cable modem (192.168.100.1). Well, I think it is odd that the 2nd ip is not returning the ping. I looked some old tracerout logs to see what was the 2nd ip. The ip was: 10.19.0.1 So, what this 2nd ip stand for? How can I find why it is not answering the ping? I don't understand it, if does not answer the ping, how can the packets continue (yeah newbie question)? edit: well, because the hope 3 have a ping of 8 ms the hop 2 request time out should really not be a problem. But it is still odd that the 2nd hop stopped to answer ping request. So my doubts are: 1. Were the ip 10.19.0.1 is from? 2. Why it stopped to answer ping requests? 3. How can hop 7 be smaller than 6 and 8 smaller than 7 and 6!?? Shouldn't the pings be higher for each hop? Like: hop 3 time should be the sum of the hops before it plus its own time (hop 3 = 1+2+3) ??

    Read the article

  • How to configure VirtualBox server for performance at home

    - by BluJai
    I currently have two physical Ubuntu Server 10.10 servers at home: one serves as our firewall/router/DHCP/VPN server and the other performs double-duty as a file server and a VirtualBox host for an Ubuntu Desktop 10.10 machine which I use from remote connections (via NoMachine) for many thin-client purposes which are irrelevant to my question. What I'd like to accomplish is to consolidate the two physical machines into one which is a dedicated VirtualBox host (most likely running Ubuntu Server 10.10). Note that I'd like to stick with VirtualBox (if possible) because I'm most comfortable with it and use it on a daily basis at both home and work. Specifically, I plan to have one VM set up as file server, another as the firewall/router/DHCP/VPN (or possibly split those a bit) and a third, which is the only current VM (already VirtualBox), which is the thin-client host. My question comes down to performance and/or recommendations about the file server VM. The file server hosts about 6 terabytes of data across 4 drives. What I'd like to do is use raw disk access from the VM directly to the existing disks. However, I'm curious what performance advantage/disadvantage that would have as compared to using shared folders from the VM host and basically just have the whole drive served as a shared folder to the VM which would then serve it to the other machines on the network. I don't know if virtual disks would even work in this scenario and I certainly wouldn't want a drive to be filled with just a single file which is 1.5 TB (disk image). To add understanding of context, but not to get additional advice, I want to virtualize these machines because I intend to regularly use the snapshot capabilities of VirtualBox for the system disks (which will be virtual drives) of the VMs and I have some physical space/power needs to address (as I mentioned, this is at home).

    Read the article

  • Port Forwarding(?) TD-W8961nd

    - by rich
    I have a bit of a weird internet setup. I am connected via a decent WiFi connection (from work) which I pick up using a Buffalo Airstation Wireless-G box. This simply picks up the signal and gives me 4 ethernet ports to connect to. That's all fine and works as it should. I also have a TP LINK TD-W8961nd router which used to be connected to the Airstation via an ethernet cable so I could essentially have WiFi access in my house. To cut a long story short I can't remember how the hell I got it to work and I can't find the notes I scribbled down on how to do it. I'm pretty sure I need to tell the router what ip to pick up the internet connection from and have the local wifi as a seperate network. How the hell I do that I have no idea right now. Can anyone give me some advice on this? If you need more information ask and I will be able to do so. Cheers in advance. edit I'm in work at the moment so I can't give 100% details but I will be able to later on.

    Read the article

  • NETKEY IPsec and ARP

    - by Shawn J. Goff
    I'm wondering if I have the correct routing setup for an IPsec tunnel. I have control over the IPsec endpoints and the hosts connected to one side. These hosts are connecting to the tunnel so that they have access to the network on the other side of what I will call the IPsec server. I don't have control of the network upstream of this server. Normally, the IPsec server will not respond to ARP requests for the hosts on the other side of the tunnel. So when a packet arrives for one of my hosts the server gets ARP requests, but the upstream router gets no response, and cannot construct the ethernet frame to send me the packets. If I was using one of the swan stacks, I would have a separate interface, and I'd probably just need to turn on proxyarp, but I'm using NETKEY, which doesn't use a separate interface for the tunnel. To solve the problem for now, I have added an eth0.5 vlan to the IPsec server, turned on proxyarp for that interface, and added all routes my hosts addresses to that interface so that it will respond to those ARP requests (and will therefore get relevant packets routed to it). This works, but it feels wrong. What is the correct way to get the upstream router to send me the traffic for these hosts?

    Read the article

  • Very strange networking problem in all computers in my house

    - by Anthony
    I have three computers in my house: One desktop (wired), and two laptops (wireless). I'm using Cox Communications (yes they suck), and yesterday they had a major outage. I know it was them because I called them up when I started losing connection to the internet. All the computers can connect just fine, but they don't have internet access. It just says "local only". The weird thing is, some of them work occasionally. For the first day my laptop was working perfectly, while all the other computers couldn't connect. Later on in the day it got reversed, and the desktop was the one with internet access. By the second day the problem on Cox's end was fixed, but we still had no access. I called them up and they reset my modem, and did the usual troubleshooting stuff. It never fixed the problem, but we found out that the problem had to do with conflicting IP addresses. My router was a Linksys WRT54G and it was about 5 years old. I figured it might have gotten damaged from the outage since it was so old, and now it's having trouble "fixing itself" and giving out the proper IP addresses. So I bought a new router, a Cisco Linksys E1000. I set everything up, and still the same problem. My computer has access right now (that's how I'm writing this), but no other computers seem to be able to get access. Is there possible damage to the modem? Can someone help me please? Sorry for this being so long.

    Read the article

  • How can I split 200Mbps of streaming traffic into routers?

    - by Jared
    As the title says, I have 200Mbps of streaming video traffic coming into my command center. How do I split the load between routers? Setup is like this: fiber --- router --- switch --- workstations I'm sorry I haven't dealt with this much traffic before. so please be gentle if you're going to kick me out :) EDITED FOR DETAILS: Okay, this specific project is for our company's IP CCTV system. We have deployed over 100++ cameras all over a building/campus and we have estimated each camera to take about 2Mbps of bandwidth each. Now, they're all connected to a switch and that's entirely fine. But coming into our command center, they have to be on a router since it'll get more than 200++ cameras next year (and I don't want to have too many hosts on one subnet). My plan was to have the 1st hundred on a 172.16.9.x block and the 2nd hundred on a 172.16.10.x block (all /24). The servers I have are currently sized to match (about 5 dual 6-core xeons) and I'd have about 19 workstations all streaming video from the 5 servers. (servers pull video from the cameras). But 200Mbps of constant traffic? How the hell do I even break this up? I need to have 1 gateway, to manage the routes... I honestly think I'm way in over my head.

    Read the article

  • Cisco ASA - VPN and Hairpinning....

    - by Nordberg
    Hi, We have 2 sites that will be linked by a IPSEC VPN between 2 Cisco ASAs: Site 1 8Mb ADSL Connection Cisco ASA 505 Site 2 2Mb SDSL Connection Cisco ASA 505 Basically, both sites need access to a service at the end of another IPSEC VPN, Site 3, which I plan to terminate at Site 2. This is due to the way the service is sold - it's billed per gateway. So if both Site 1 and Site 2 had their own VPN connection to Site 3, it would cost us twice as much... Anyway, my idea is to have all traffic from Site 1 destined for Site 3 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 3 has come via Site 2. I understand this is known as hairpinning but I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible and, secondly, can anyone point me in the direction of an example of such a configuration? Many Thanks.

    Read the article

  • Configure Cisco Pix 515 with DMZ and no NAT

    - by Rickard
    I hope that someone could shed some light over my situation, as I am fairly new to PIX configurations. I will be getting a new net for my department, which I am going to configure. At my hands, I have a Cisco PIX 515 (not E), a Cisco 2948 switch (and if needed, I can bring up a 2621XM router, but this is my private and not owned by my dept.). The network I will be getting is the following: 10.12.33.0/26 Link net between the ISP routers and my network will be 10.12.32.0/29 where GW is .1 and HSRP roututers are .2 and .3 The ISP has asked me not to NAT the addresses on my side, as they will set it up to give 10.12.33.2 as a one-to-one nat to a public IP. The rest of the IP's will be a many-to-one NAT to another public IP. 10.12.33.2 is supposed to be my server placed on the DMZ, the rest of the IP's will be used for my clients and the AD server (which is currently also acting as a DHCP server in the old network config with another ISP). Now, the question is, how would I best configure this? I mean, am I thinking wrong here, I am expected to put the PIX first from the ISP outlet, then to the switch which will connect my clients. But with the ISP routers being on a different network, how will the firewall forward the packets to the other network, it's a firewall, not a router. I have actually never configured a pix before, and fortunately, this is more like a lab network, not a production network, so if something goes wrong it's not the end of the world, if though annoying. I am not asking for a full configuration from anyone, just some directions, or possibly some links which will give me some hints. Thank you very much!

    Read the article

  • Windows XP can use a wired network port, but MacBook (OS X) fails on the same port

    - by Dean Hill
    I wired the Cat5 in my house seven years ago. The wired ports have worked fine with both my Windows XP laptop and MacBook. My wireless network also works fine, but I like to use wired occasionally. One of the Cat5 runs wasn't terminated with a jack, so I recently terminated this wire with a port/jack on the wall end and a standard Cat5 plug on the end that plugs into my router. This is the same setup as my other runs. Unfortunately, the MacBook isn't working well with the new wired port. The OS X Network System Preferences show the IP, Subnet, Router, etc., and everything looks fine. A "netstat -ibd" shows no errors or dropped packets. However, when I open a page in Safari, the status says "Contacting 'www.google.com'" and appears to hang. If I wait for a couple minutes, part of the Google page starts to display, but it is still not the full page load. When I use a Windows XP laptop on the same wired port, everything works fine. An internet speed test shows good results and all web pages load fine. A "netstat -e" under Windows shows no errors. I've used a Cat5 tester, and the cable tests fine (wires 1-8 light up in sequence). I've replaced both the port/jack and the connector twice to make sure I wired things correctly. I'd really like this Cat5 to work with the MacBook (and I'm trying to avoid running a new length of cable). Any ideas what the problem could be?

    Read the article

  • Mac and L2TP VPN no problems, xp, vista and 7 no go :s

    - by The_cobra666
    Hi all, I've got some weird problem and I'm out off options. The situation: When connecting from my mac to the VPN server (Windows Server 2003 R2) with L2TP PSK, everything works like it should. However, when I connect from a Windows PC, nothing happens. it spits out error 809 and sometimes 789. Now I know that my ports are OK, since the mac can connect without any problems. It's the same for: XP, Vista SP2 and 7. None can connect. If I connect to the VPN server directly (to the internal IP instead of WAN from the router), it connect's without a problem. Connecting using PPTP works... now if only L2TP would work thank you very much Windows! I have checked the counters on my linux router with iptables -L -nv and they do not raise when connecting. Not on ACCEPT and not on DROP. Only when connecting from the mac. I've found the guide from Microsoft to enable: AssumeUDPEncapsulationContextOnSendRule in the registery. I have set it to "2", on the server and client. Still no go. After that registery key it started giving me error 789 instead of 809. The IPSEC services are running on the client and server. Is there anyone that ppleease can help me with this! I've been working on this for 2 days and I'm out of options. Thanks!

    Read the article

  • Redirect specific domains with DNS

    - by user66377
    Currently we filter internet content using OpenDNS, our internal Windows DC/DNS servers point to the router's DNS, which then points to the OpenDNS servers. This works well to block all computer's on the network equally. New issue. We now need to separate what computers can go to what sites. So facebook is blocked for everyone right now, but I need to open it up to the 3 community computers now. The 3 community computers will be on an untrusted network seperate from the company computers so they can have their own DNS server, from their own router. The issue is though they still must connect to the internet using the same IP address. So OpenDNS sees the same IP and blocks them the same way. We are looking into getting a second IP, but it's not likely an option without going up to the next major level with our ISP which we don't want to do. My thought is this. Can I setup a DNS server on the untrusted network, and then depending on the request that comes in, have it send it to either OpenDNS or our ISP's DNS? Example www.facebook.com and www.youtube.com are both on the OpenDNS blacklist. So if they go to www.youtube.com, the local DNS server goes to the ISP's DNS to get the IP and thus the client gets the right IP and can go to the site. This would be manually entered for each allowed site thus creating a white list. Then if they go to www.facebook.com, since the local DNS server does not find an entry, it sends the request to OpenDNS, which then sees the site is on the blacklist, and thus sends the it's blocked webpage. The local DNS server can be either Bind on Linux or MS DNS on Window 2008. If this can be done, can you give some direction as well as I've never setup a DNS such as this before. Thanks

    Read the article

  • Passive FTP Server Port Configuration Troubles Win2003

    - by Chris
    Win2003 Ports 20 & 21 are open IIS6 - Direct Metabase Edit enabled Configured FTP service passive range to 5500-5550 5500-5550 added to windows firewall iisreset and double checked by restarting ftp service nothing has changed, when I connect and enter passive, it still hangs when ever I try to LIST or transfer files. Active is just as useless. Microsoft Windows [Version 6.1.7600] Copyright (c) 2009 Microsoft Corporation. All rights reserved. C:\Users\user>ftp ftp> open x.x.x.x Connected to x.x.x.x. 220-Microsoft FTP Service xxxxxxxxxxxxxxxxxx 220 xxxxxxxxxxxxxxxxxx User (x.x.x.x:(none)): user 331 Password required for user. Password: 230-YOUR ACTIVITY IS BEING RECORDED TO THE FULLEST EXTENT 230 User user logged in. ftp> QUOTE PASV 227 Entering Passive Mode (82,19,25,134,21,124) ftp> ls 200 PORT command successful. 150 Opening ASCII mode data connection for file list. and it hangs.. Now I can see from microsooft documentation that on newer windows releases, additional steps such as these are suggested, but they dont work on 2003... netsh advfirewall firewall add rule name=”FTP Service” action=allow service=ftpsvc protocol=TCP dir=in netsh advfirewall set global StatefulFTP disable is there anything I am missing, what is this StatefulFTP malarkey at the end EDIT I can connect and transfer binary files using WinSCP client - Therefore the problem must be with my ftp commands no? Can anyone see anything wrong with my windows ftp client example? why would it hang on ls, i tried QUOTE LIST as well, and that just hangs, and the windows ftp client doesnt work in active, it hangs if I try to go "binary" then put - This worked before I added 5500-5550 on the router. I have since added this range to the router but no difference to the windows ftp client.

    Read the article

  • Sonicwall TZ210 - Set up public wifi on separate subnet & interface

    - by thomasjbarrett
    I want to set up a public wifi by connecting another router to the X6 interface, and put it on a separate subnet (192.168.10.0/24) & in the DMZ Zone to keep it away from the regular LAN. I believe I have the network settings correct: the router has acquired the IP and DNS information from the TZ210, and the TZ210 shows it as an active DHCP lease. X6 is in the DMZ. I now have a routing/NAT/firewall problem, since I can't get any traffic to travel from the subnet to the internet. I can't get to any external websites and can't ping the TZ210 from the subnet. X0 is the regular LAN, and X1 is the WAN. Looking for any tips or tutorials on this. Here's my current relevant rules: Routing Source: X6 Subnet Destination: Any Service: Any Gateway: Default Gateway Interface: X6 Source: Any Destination: X6 Subnet Service: Any Gateway: 0.0.0.0 Interface: X6 NAT Policies Source Original: Any Translated: WAN IP Destination Original: Any Translated: Original Inbound: X6 Outbound: X1 Source Original: Any Translated: U0 IP Destination Original: Any Translated: Original Inbound: X6 Outbound: U0 Firewall DMZ LAN : Deny All DMZ WAN : Allow All LAN DMZ : Allow All WAN DMZ : Allow All

    Read the article

  • Route all traffic via OpenVPN client

    - by Ilya
    I've got OpenVPN client running on 192.168.0.3. What I'd like to do is route all the traffic from the second computer with 192.168.0.100 via OpenVPN client that's running on the first computer. My router ip is 192.168.0.1 Network topology: Windows computer with OpenVPN client: 192.168.0.3 Windows computer whose traffic has to be rerouted: 192.168.0.100 Router: 192.168.0.1 I want it to work in the following way: 192.168.0.100 computer => 192.168.0.3 computer => OpenVPN => 192.168.0.1 How can I achieve that by only modifying windows' routing table? I've tried entering the following into windows shell(on computer without VPN), which didn't work (it just dropped my internet connection): route delete 0.0.0.0 mask 255.255.255.255 192.168.0.1 route add 0.0.0.0 mask 255.255.255.255 192.168.0.3 Should I also setup the computer that has OpenVPN client running? Does it have anything to do with windows tcp forwarding? Thanks!

    Read the article

  • Optimal Networking Setup for a 2-Story unit?

    - by user29336
    I am moving into a 4 bedroom two-story unit. It’s roughly 2,200 sq ft. I want absolute max throughput possible to be achieved in all focal points. We’re all in internet related industries. Between gaming and web-development latency and throughput are major factors for us. Here’s our main focal points: 1) Garage (office). downstairs 2) Each bedroom x4. upstairs 3) Living room. downstairs The fastest line we can get is Comcast 50mbdown/5up (Wideband). I am looking for the best way to achieve wireless and wired performance for our setup. Our gaming computers may be in our bedroom, and we also may bring it down to the office every now and then for “LAN” sessions. Most wireless will be happening downstairs with our laptops, but since we may do LAN sessions then hard wired latency may be important there too. My concerns: If we do only wireless there would be too much latency for gaming. I don’t know if placing one D-link DGL 4500 on the top floor would be enough; which I currently own. (http://dlink.com/us/en/home-solutions/support/product/dgl-4500-xtreme-n-gaming-router) As far as I’m aware wireless signals transfer best top down. Would this wireless router be enough on top floor and that’s it? My second strategy was a combination of wiring and wireless but I’m not sure what’s easiest way to do this? This is a place we’re renting, so I’m not sure how much leeway we have with wiring, but we’re all pretty competent... if we can’t drill through a wall we can probably “stitch” them across the edges wherever needed. Thoughts on the optimal way to do this?

    Read the article

  • Virtual Wifi Issue Windows 7

    - by Matt
    Lately I've been trying to use my laptop as a wireless router in my room. I have it connected to my school's network through ethernet, and I want to set up wireless so that I can use Wifi on my Android phone and iPod Touch. In the past, I used Connectify, but I started having an issue where my phone would find the network, connect, attempt to get the IP, and then suddenly the network would disappear. Then it'd pop up again, and the same process would happen over and over. I decided that I'd totally uninstall Connectify, but after that, neither Virtual Router Manager nor the command prompt could create a viable network either. My phone and even my iPod now encounter the same problem. Neither can successfully connect. So evidently there is something wrong with the laptop's virtual wifi feature, and I have no idea what that could be. I've tried enabling certain services that virtual wifi supposedly relies on, but some of them don't start, namely Remote Access Connection Manager. But I also have read that these enable on their own and that if they are normally not enabled it's fine. Furthermore, I even uninstalled and reinstalled the drivers for my wireless card. Any ideas as to why my virtual wifi won't function? Anything? I really would love to get this working...

    Read the article

  • Suggestions for accessing SQL Server from internet

    - by Ian Boyd
    i need to be able to access a customer's SQL Server, and ideally their entire LAN, remotely. They have a firewall/router, but the guy responsible for it is unwilling to open ports for SQL Server, and is unable to support PPTP forwarding. The admin did open VNC, on a non-stanrdard port, but since they have a dynamic IP it is difficult to find them all the time. In the past i have created a VPN connection that connects back to our network. But that didn't work so well, since when i need access i have to ask the computer-phobic users to double-click the icon and press Connect i did try creating a scheduled task that attempts to keep the VPN connection back to our office up at all times by running: >rasdial "vpn to me" But after a few months the VPN connection went insane, and thought it was both, and neither, connected an disconnected; and the vpn connection wouldn't work again until the server was rebooted. Can anyone think of a way where i can access the customer's LAN that doesn't involve opening ports on the router needing to know their external IP customer interaction of any kind Blah blah blah use vpn vnc protocol has known weaknesses you are unwise to lower your defenses it's not wise to expose SQL Server directly to the internet you stole that line from Empire Customer doesn't care about any of that. Customer wants things to work.

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Hello everyone, Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • Is it possible to provide a wired ethernet connection to external devices with an extra LAN card?

    - by Ben McCormack
    I'm trying to provide a wired ethernet connection (wireless is not an option for this device) to a device (Samsung blu-ray player) without running Cat5 cable all over the home. I have a PC sitting next to this device and the PC is connected to the network via a wireless USB adapter. Is it possible to provide a wired connection from the PC to the wired device using the (currently unused) ethernet port in the back of the computer? Here's how I envision the device getting connected to the internet via my network: Linksys WRT54G v8 Wireless Router | ``--> Windows 7 PC connected via wireless | ``--> Blu-ray player connected via wired connection to the ethernet port on the PC. If so, how is this done? Will I need a crossover cable? What settings will I need to change in Windows 7 so that the device can connect? NOTE: I'm trying to avoid having to buy a wireless bridge and/or hacking a router with an open-source firmware to get this to work. See my previous question for more details.

    Read the article

  • Server error 500: Undefinable problem with my Zend Framework based site

    - by sanders
    Lately I had to reinstall my development site on my ubuntu machine since my system crashed after an os update. 4 days later my site is still not running as it should. Whenever i do an action which has in it an action on a database, it stops working. For example when Registring a new user, i get the following error: [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/user/register [Sun Jul 25 20:07:20 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/user/register [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Notice: Trying to get property of non-object in /var/www/nrka2/application/bootstrap/Bootstrap.php on line 169, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP Stack trace:, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 1. {main}() /var/www/nrka2/public/index.php:0, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 2. require() /var/www/nrka2/public/index.php:2, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 3. Zend_Application->bootstrap() /var/www/nrka2/application/application.php:23, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 4. Zend_Application_Bootstrap_BootstrapAbstract->bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application.php:355, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 5. Zend_Application_Bootstrap_BootstrapAbstract->_bootstrap() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:583, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 6. Zend_Application_Bootstrap_BootstrapAbstract->_executeResource() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:619, referer: http://nrka2/css/main.css [Sun Jul 25 20:07:22 2010] [error] [client 127.0.0.1] PHP 7. Bootstrap->_initViewSettings() /var/www/Zend/ZendFramework-1.10.6/library/Zend/Application/Bootstrap/BootstrapAbstract.php:666, referer: http://nrka2/css/main.css My Bootstrap class looks like this: <?php class Bootstrap extends Zend_Application_Bootstrap_Bootstrap{ /** * * @var unknown_type */ public $frontcontroller; /** * * @var unknown_type */ protected $_logger; /** * * @var unknown_type */ protected $_acl; /** * * @var unknown_type */ protected $_auth; /** * Setup the logging */ protected function _initLogging() { $this->bootstrap('frontController'); $logger = new Zend_Log(); $writer = 'production' == $this->getEnvironment() ? new Zend_Log_Writer_Stream(APPLICATION_PATH . '/../data/logs/app.log') : new Zend_Log_Writer_Firebug(); $logger->addWriter($writer); if ('production' == $this->getEnvironment()) { $filter = new Zend_Log_Filter_Priority(Zend_Log::CRIT); $logger->addFilter($filter); } $this->_logger = $logger; Zend_Registry::set('log', $logger); } protected function _initDefaultModuleAutoloader(){ $this->_logger->info('Bootstrap '. __METHOD__); $this->_resourceLoader = new Zend_Application_Module_Autoloader(array( 'namespace' => 'EventManager', 'basePath' => APPLICATION_PATH . '/modules/eventManager', )); $this->_resourceLoader->addResourceTypes(array( 'modelResource' => array( 'path' => 'models/resources', 'namespace' => 'Resource', ), 'service' => array( 'path' => 'services', 'namespace' => 'Service' ), )); } // @todo develop this function protected function _initDbProfiler(){ $this->_logger->info('Bootstrap ' . __METHOD__); if ('production' !== $this->getEnvironment()) { $this->bootstrap('db'); $profiler = new Zend_Db_Profiler_Firebug('All DB Queries'); $profiler->setEnabled(true); $this->getPluginResource('db')->getDbAdapter()->setProfiler($profiler); } } /** * Add Controller Action Helpers */ protected function _initActionHelpers() { $this->_logger->info('Bootstrap ' . __METHOD__); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Acl()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_RedirectCommon()); Zend_Controller_Action_HelperBroker::addHelper(new SF_Controller_Helper_Service()); } /** * * @return unknown_type */ protected function _initRoutes(){ $this->_logger->info('Initialize Routes '. __METHOD__); $this->bootstrap('frontController'); $router = $this->frontController->getRouter(); $route = new Zend_Controller_Router_route( 'register', array( 'controller' => 'user', 'action' => 'register' ) ); $router->addRoute('register',$route); $route = new Zend_Controller_Router_route( 'login', array( 'controller' => 'user', 'action' => 'login' ) ); $router->addRoute('login',$route); $route = new Zend_Controller_Router_route( 'logout', array( 'controller' => 'user', 'action' => 'logout' ) ); $router->addRoute('logout',$route); } /** * * @return void */ protected function _initLocale(){ $this->_logger->info('Bootstrap '.__METHOD__); $locale = new Zend_Locale('nl_NL'); Zend_Registry::set('Zend_Locale', $locale); } protected function _initAcl(){ $this->_acl = new EventManager_Service_Acl(); } /** * * @return void */ protected function _initViewSettings(){ $this->_logger->info('Bootstrap '.__METHOD__); $this->bootstrap('view'); $this->bootstrap('Acl'); $this->_view = $this->getResource('view'); //set encoding and doctype $this->_view->setEncoding('UTF-8'); $this->_view->doctype('XHTML1_STRICT'); $this->_view->headMeta()->appendHttpEquiv('Content-Type', 'text/html; charset=UTF-8'); $this->_view->headMeta()->appendHttpEquiv('Content-Language', 'en-US'); //@todo op een later moment moeten hier nog de stylesheets worden toegevoegd $this->_view->headLink()->appendStylesheet('/css/main.css'); //$this->_view->headTitle('Event Manager'); /* Set the head style. $this->_view->headTitle->headStyle(); */ $this->_view->headTitle()->setSeparator(' - '); $this->_auth = Zend_Auth::getInstance(); $navigation = new Zend_Config_Xml(APPLICATION_PATH.'/configs/navigation.xml','nav'); $navContainer = new Zend_Navigation($navigation); $this->_view->navigation($navContainer)->setAcl($this->_acl)->setRole($this->_auth->getStorage()->read()->usr_role); //THIS IS LINE 169!!!!!!!!! } /** * Add graceful error handling to the dispatch, this will handle * errors during Front Controller dispatch. */ public function run() { $errorHandling = $this->getOption('errorhandling'); try { parent::run(); } catch(Exception $e) { if (true == (bool) $errorHandling['graceful']) { $this->__handleErrors($e, $errorHandling['email']); } else { throw $e; } } } /** * Handle errors gracefully, this will work as long as the views, * and the Zend classes are available * * @param Exception $e * @param string $email */ protected function __handleErrors(Exception $e, $email) { header('HTTP/1.1 500 Internal Server Error'); $view = new Zend_View(); $view->addScriptPath(dirname(__FILE__) . '/../views/scripts'); echo $view->render('fatalError.phtml'); if ('' != $email) { $mail = new Zend_Mail(); $mail->setSubject('Fatal error in application Storefront'); $mail->addTo($email); $mail->setBodyText( $e->getFile() . "\n" . $e->getMessage() . "\n" . $e->getTraceAsString() . "\n" ); @$mail->send(); } } } I have tried to debug my code, but everyting goes well until I do somethign with the db. But I don't know what goes wrong with the db. I don't get any clear error messages. Can someone help me? Some more possible interesting data: [bootstrap] resources.db.adapter = "PDO_MYSQL" resources.db.isdefaulttableadapter = true resources.db.params.dbname = "ladosa" resources.db.params.username = "root" resources.db.params.password = "root" resources.db.params.hostname = "localhost" resources.db.params.charset = "UTF8" resources.db.params.profiler.enabled = true resources.db.params.profiler.class = Zend_Db_Profiler_Firebug Autoloadernamespaces[] = "Zend_" Autoloadernamespaces[] = "SF_" phpsettings.display_errors = 0 phpsettings.error_reporting = 8191 phpSettings.date.timezone = "Europe/Amsterdam" bootstrap.path = APPLICATION_PATH"/bootstrap/Bootstrap.php" pluginPaths.resource_ = APPLICATION_PATH"/resources" resources.frontcontroller.moduledirectory = APPLICATION_PATH"/modules" resources.frontcontroller.defaultmodule = "eventManager" resources.frontcontroller.params.prefixDefaultModule = true resources.frontcontroller.exceptions = false resources.view[] = "" resources.layout.layoutPath = APPLICATION_PATH "/layouts/scripts" resources.view.encoding = "UTF-8" resources.view.title = Rode kruis Vrijwilligers applicatie ;resources.view.helperPath.Default_View_Helper = APPLICATION_PATH "/modules/eventManager/views/helpers" resources.layout.layout = "main" [production:bootstrap] [development:bootstrap] ;resources.frontController.throwExceptions = 1 ;phpSettings.display_startup_errors=1 ;phpSettings.display_errors = 1 ;resources.frontcontroller.throwerrors = [test:production] btw. I CAN login to my database command line with the given username and password. Update: today i decided to investigate on my http request and i came to an error 500. My apache logs don't give any related information, I think. I posted the logs above. Any idea's?

    Read the article

  • Linux Bridge, Samba netbios name/hostname access

    - by Christopher Wilson
    I am currently running a linux bridge in the following configuration ADSL Modem: 192.168.1.1 Linux Bridge: eth0: 192.168.1.2 eth1: no address Wireless Router: 192.168.0.1 My issue is that i cannot access the "Linux Bridge" shares using the WINS name of the server via client systems (yes i understand it is a transparent bridge but i can access it via the 192.168.1.2 address this is not on the same subnet as the client systems). This is the global section of my SMB.CONF [global] unix extensions = off os level = 20 netbios name = server guest account = nobody server string = 447 Server security = share #unix extensions = no #wins support = yes #wins server = 192.168.0.1 name resolve order = wins lmhosts hosts bcast interfaces bridge1 eth0 eth1 lo bind interfaces only = yes Can i access a bridged server using it's WINS name to access samba shares? Cheers Chris

    Read the article

  • Measure Total Bandwidth for Billing

    - by TonyZ
    I am setting up a new network which customers will host their applications on. It needs to be able to scale out to a few hundred servers and each server will have several VMs on it. Right now in my test environment, after the telco router, we are using a Linux router/firewall which is then connected to a Layer 2 switch. Could be a layer 3 in the future. I need to track total bandwidth per VM for each machine, and I need to do it in a way that it is not part of the VM. Each VM will have a private class ip address which is Natted by the gateway, or we may eventually run more than firewall/reverse proxy off a layer 3 switch. So my thinking is that I can do it off of a promiscuous port on the switches, or at the gateway firewall. I would like to have an out of the box solution, preferably open source. Does anyone have suggestions on the easiest way to set this up, and the easiest tool to use. I have looked at the web sites for Nagios, Zenoss, Zabbix, ntops on the firewall, etc. It is hard to ascertain just from the web sites if they do exactly this or not. Obviously, performance is also somewhat key here. Anything running on the gateway should not drag it down doing traffic accounting. Thanks for any thoughts. Tony Zakula

    Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >