Search Results

Search found 2592 results on 104 pages for 'dell 6224 powerconnect'.

Page 98/104 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104  | Next Page >

• Blue screen of Death on Install

  - by Toby Allen

  I have a machine with Windows Vista Installed. It has an Intel X25 SSD as the System Drive I want to reinstall (I plan to format and overwrite Vista) with XP. When I boot up using the Dell XP CD it loads the initial drivers then i get a Blue Screen. This is quite concerning. The installed OS works ok, but its giving problems so I want to remove it. Should I just format the SSD and try again? Will this make any difference? Can I do something to avoid hitting the Blue Screen? Its possible I had corrupt sectors on one of the other disks, will a new XP install use the System drive or drive 0? Can I force the install to use a specific drive when installing? Error: *** STOP: 0x0000007B (0xF78D2524,0x0000034,0x00000000,0x00000000) I never did find the answer, however I removed the SSD and tried to install on other disk - CRASH I disconnected the other disk and tried to install with only SSD plugged in - CRASH I removed 1 block of RAM - CRASH I used a windows 7 CD - NO CRASH

  Read the article

• Sudden "No Signal" in HDMI-DVI connection

  - by nazikus

  Yesterday I have connected external display Asus VW192C to my laptop Dell XPS 14-L421X via HDMI-to-DVI-D cable. And it worked perfectly fine from start. The day after, Asus screen went blank showing "No signal". Every time I connection/disconnection cable or power off/on the display it says "No signal". And I didn't change any system configurations meanwhile. To troubleshoot the problem, I have tried to connect laptop to TV (hdmi-to-hdmi) - it was fine. I've tried to connect a different laptop to the display via the same cable - worked fine as well. So its obviously something on system level, either Windows or graphics drivers. Also it seems that Windows still see the external display (I can move mouse pointer away from the main screen in Extended mode), but there's just no signal. Any ideas? What else to try? PS. My laptop has 2 graphics cards - GeForce 630M and Intel HD 4000 using NVidia Optimus technology. I have updated to latest Intel and NVidia drivers, still didn't help. PPS. Although I shouldn't have updated (from Intel support): "our Intel generic graphics drivers from the Intel website do not support using both Intel Graphics 4000 and NVidia GeForece GT630M". Nevertheless, it should not affect connectivity to additional display.

  Read the article

• file read performance degrades as number of files increases

  - by bfallik-bamboom

  We're observing poor file read IO results that we'd like to better understand. We can use fio to write 100 files with a sustained aggregate throughput of ~700MB/s. When we switch the test to read instead of write, the aggregate throughput is only ~55MB/s. The drop seems related to the number of files since the throughput for read and write are comparable for a single file then diverge proportionally as we increase the number of files. The test server has 24 CPU cores, 48GB of memory, and is running CentOS 6.0. The disk hardware is a RAID 6 array with 12 disks and a Dell H800 controller. This device is partitioned with ext4 using the default settings. Increasing the readahead (using blockdev) improves the read throughput significantly but it still doesn't match write speed. For instance, increasing the readahead from 128KB to 1M improved the read throughput to ~145MB/s. Is this a known performance issue in our OS/disk/filesystem configuration? If so, how can we tell? If not, what tools or tests can we use to further isolate the issue? Thanks.

  Read the article

• retain last used path to location for saving files in Windows 7

  - by Mark Miller

  I am using Microsoft Office 2010 and Windows 7 on a Dell PC. I am opening a bunch of MSWord files one at a time, copying data tables therein, pasting the data into Excel and saving the Excel files as comma delimited text files. I am creating a separate Excel file for each MSWord file. The path to the folder containing the saved comma-delimited files is quite long, something like this: c:\users\me\aa\bb\cc\dd\ee\ Every time I open Excel and save a new comma-delimited file I have to re-navigate the entire path (c:\users\me\aa\bb\cc\dd\ee). In the past Windows seemed to remember the last used path, saving a lot of tedious key-strokes. In fact, I think Windows did this for me as recently as last week, albeit on a different computer. Can I apply a setting in Windows somewhere asking it to offer the last used path as a default when saving files so I do not have to re-navigate the entire directory structure to save each new comma-delimited file? If I can, how so? Where is the option for specifying that setting? Thank you for any help.

  Read the article

• Why am I getting programs stuck in log_wait_commit under Linux?

  - by staticsan

  There is something subtly wrong with my Linux install that I just can't locate. It is Ubuntu Lucid Lynx (10.04) 64-bit. Hardware is a Dell Optiplex 960: Intel Core 2 Quad CPU, 8Gb of RAM, 2x 300Gb HDDs. /home is ext2 on one disk and everything else is on the other (/ is also ext3). I have VirtualBox running a 64-bit Vista image for Outlook calendaring, but the heavyweight apps are IntelliJ, NetBeans, MySQL and Opera. Opera also loads my mail (IMAP) of which there is over 10,000 messages. The problem is that Opera stalls for a few seconds from time-to-time. Watching the process list shows it's in log_wait_commit which means (as far as I have figured out) the filesystem is holding things up. Sometimes I can make this happen by doing a subversion update, but usually it happens for no reason I can see. It usually happens to Opera, but I've seen NetBeans go under, too. It doesn't make the app crash - it's just completely unresponsive for a few seconds. Googling has not helped. The closest I got was to remove the sync attribute in the file system. This achieved nothing. On the advice of a Linux guru friend, I lowered /proc/sys/vm/dirty_writeback_centisecs to 300, but that didn't do anything, either. And it was all he could think of. What is going on and can I fix it? (And how?)

  Read the article

• Win 7 64 with 8 gig of ram, getting running low on memory errors.

  - by John

  I have a new Dell laptop running Win7 64 with 8 meg of ram. If I leave the system running overnight I start getting low memory errors the next day. Looking at task manager it shows 6.27 gig used but looking at the processes list the totals don't show nearly that much. I am showing all processes from all users. I have also looked at the processes with PRocess Explorer and see the same results. Using resource monitor I see 4165 MB in Use, 2328 MB Modified and 1352MB Standby with only about 345 MB free. These numbers don't seem to add up to what I have running. I have Visual Studio 2010 running along with a number of IE8 sessions. I have run the same set of apps with XP SP2 32 bit with 4 gig of memory and never had this sort of problem. What is Modified memory? What is Standby memory? Any suggestions on what might be the issue and what might be a fix? TIA J

  Read the article

• Computer is dying--what should I be looking for?

  - by Will

  Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

  Read the article

• How to disable my laptop's defective keyboard?

  - by Kolink

  I have an Alienware M17x R2, and after a couple years of use I started having problems with the keyboard: Intermittently, and without warning or apparent cause (even if I'm not touching the computer), the S key (and more recently the D key) will start firing incessant signals until I hit the offending key. I've been using a USB keyboard, which is conveniently exactly the right size to fit over the built-in keyboard without touching any buttons. However, even as I type the defective keyboard will fire its stream of signals. I have contacted Dell about this, twice in fact. The first time, I was just bluntly told that they don't ship replacement keyboards. The second time I was told that they did, but they were out of stock and they would contact me when they were in stock again. They haven't contacted me since. I can't seem to work out which device to disable in the device manager. Here's a screenshot of what I have: None of the keyboard devices have "Disable" in their context menus, only "Uninstall"... so you'll understand if I'm hesitant to try anything myself. Any advice on how to fix this?

  Read the article

• fglrx-legacy-driver not seeing Radeon HD 4650 AGP

  - by Rocket Hazmat

  I am running Debian Squeeze on an old Dell Dimension 8300 box. It has an AGP Radeon HD 4650 card. I use this machine to mine bitcoins, and today I noticed that the machine had rebooted! My precious uptime! Anyway, my miner wouldn't start, so I figured might as well update my graphics driver, maybe that would fix the issue. I went to amd.com and downloaded the newest driver (12.6 legacy), but after installing it, aticonfig gave an error: aticonfig: No supported adapters detected I uninstalled the driver and figured I'd try to install it from apt. AMD has dropped support for the HD 4000 series in fglrx, forcing me to use fglrx-legacy-driver (currently only in experimental). In order to install this, I had to update libc6 (and some other important packages, like gcc), I had to use their wheezy versions. I finally got glrx-legacy-driver installed, but I still got: aticonfig: No supported adapters detected Why isn't the driver finding my video card? I have a hunch it has something to do with the fact that it's an AGP video card. Here is the output of lspci -v (why does it say Kernel driver in use: fglrx_pci?): 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RV730 Pro AGP [Radeon HD 4600 Series] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices [AMD] nee ATI Device 0028 Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16 Memory at e0000000 (32-bit, prefetchable) [size=256M] I/O ports at de00 [size=256] Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K] Expansion ROM at fea00000 [disabled] [size=128K] Capabilities: [50] Power Management version 3 Capabilities: [58] AGP version 3.0 Kernel driver in use: fglrx_pci

  Read the article

• Windows 7 pc freezes for an indeterminate amount of time after unlocking

  - by pikes

  Not sure if this type of question is appropriate for this forum, but I've tried everything I can think of to solve this problem aside from format/reinstall. I recently got a new work PC (Dell optiplex 755) with windows 7 professional x64. Standard developer software installed for .net development: VS2008, VS2005, SQL management studio, office 2007, etc. Recently I've been having this weird problem where after I lock my pc, when I try to unlock it, the screen will be black for awhile after unlocking. I can ctl+alt+del and put my password in but then it just goes black. The amount of time on the black screen seems to be related to the amount of time I am away from my PC. If only away a few minutes, it'll take about a minute to get to the desktop. If away for an hour, could take up to 15 minutes. If I lock it and go home for the night, I have to restart my PC in the morning (I've let it sit for an hour after a night of being locked and nothing happened). It doesn't do it every time but definitely the majority of the time. One weird thing I've seen is that if I remote into my machine before trying to log back in it does not do it. I uninstalled all software back to the point when I remember it started happening and it still does it. I was using this PC for a few weeks without this problem happening at all. Anyone know what my next troubleshooting steps could be? My IT department tried to fix it by moving my old profile to another disk and having me log in, effectively recreating a profile from scratch but that didn't solve it. As I said above if this isn't the right forum for these types of questions please let me know. Thanks in advance!

  Read the article

• Windows Server 2008 R2 grinds to a screeching halt during file copy operations

  - by skolima

  When my Windows Server 2008 R2 machine is performing any large disk operations (copying 10GB files from one drive to another, copying similar file over network, merging HyperV snapshots, compressing large files), performance of the whole machine slows down terribly, everything becomes unresponsive. This is noticeable in any situation when the disk access is large enough not to fit in the cache. Are there any settings available for tuning this behaviour? I can accept slower file transfer if this would give me more responsiveness. System details: Dell Optiflex 960, Core 2 Quad Q9650, 8GB RAM, 2 SATA drives - 320GB (ST3320418AS) and 1TB (ST31000528AS), NCQ active on both, Intel 82564LM-3 Gigabit Ethernet, ATI HD 3450 graphics, Intel ICH10 bridge. We have multiple machines like this, every one is exhibiting the same behaviour. I though this was overkill for a workstation, apparently I was mistaken. Update: I guess I shouldn't have mentioned the HyperV at all. The above configuration is a standard workstation setup at the company I work for, this is not a server of any kind. I have at most 3 virtual machines working, and usually I'm the only person accessing them. Never the less, the slowdown occurs even when no VMs are running. On a Linux machine I'd simply ionice the copy process and I could forget about it, is there any way to manage IO priorities on Windows?

  Read the article

• How to set up multiple video cards in Windows XP

  - by Swish

  All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

  Read the article

• Booting Windows from different partition than system

  - by szamil

  I have bought an SSD disk, but my laptop (Dell Precision M6300) refuse to use it as a target disk for windows (AHCPI on/off, BIOS up-to-date). I can't exchange the disk unfortunately... But fortunately, I've managed to install windows using USB disk case. The problem is, that when I put that disk as my internal drive it can't boot. (Disk read error, Three Finger Salute ... ) So I tried with Linux (openSUSE), I manage to install it as well, but when I tried to boot GRUB from internal drive I get errors again. (Should I try GRUB2?) I figured out that I can boot into that internal hard drive's openSUSE system using small USB drive with GRUB, kernel and image on it. So, I just run GRUB from USB drive, it loads necessary stuff from the USB drive and then continues from the internal drive. I want to do the same with Windows. But GRUB (rootnoverify and chainloader +1) does not boot my windows on internal drive. The question: is there any chance to copy the critical windows' boot files into the USB drive, to make it possible to boot from that USB drive, but continue booting from internal (different in general) drive? The USB drive would became a system hardware key! ;-) Disk: Plextor M5S 128GB Sata III, laptop has Sata II, but it's compatible anyway, right?

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• How do I reformat/reinstall an OS on a hard drive after its been wiped by eban?

  - by Aggrevated

  I am trying to install XP SP2 Home on a Dell Inspiron 531s. Yes it came with Vista but I happen to own a legal copy of XP. I bought the hard drive off eBay(used). I changed the bios settings to boot from CD and when I start up the computer it goes to the hard drive which says its been cleaned using eban XX.XXX.XXX. My problem is that I can't get the PC to boot from the XP disk. I have tried putting the disk into another PC it works. I have put the bad hard drive back in and the dvd+rw works. I am really stumped and am beginning to think that the hard drive is unusable. I only have the sata cords for 1 hard drive to be hooked up at a time. Any ideas or suggestions or confirmation that I can't use this hard drive would be appreciated. Yes I am probably a 'noob' but I have installed XP and Vista many times without any problems. I don't need to be put down on my level of experience I just need answers. Thanks Everyone

  Read the article

• Can't login after upgrading to Windows 8.1

  - by flatline

  This afternoon, I upgraded my work laptop from Windows 8 to Windows 8.1. I had previously had a local account, but after the upgrade, it prompted me to enter my windows account credentials, which I had set up beforehand at some point. I entered my password and clicked next, went through another screen or two, grew tired with the process, and clicked whatever the equivalent button to "skip this step" that I was presented with. Now I can't log in. Not with my (previous) local account password, and not with my windows account password. It's a Dell with biometric identification, which I had set up previously, so I put my finger on the reader and it complained that I couldn't use that fingerprint because I had changed my password. But, I hadn't wittingly changed my password at all. I assume that what happened is that, by entering my credentials, my local account was tied to the Windows account, but because I cancelled the process partway through, something went wrong and I cannot log in. A few questions: 1) How do I log in with my windows account credentials? Should LOCALMACHINENAME\username, which was my previous login method, still work for the Windows account? When I booted to safemode it prompted me with WindowsAccount\myemailaddress, which allowed me to login there, but the regular login doesn't accept the '@' symbol. 2) Is there any way to make that account local-only again? I can't find any way of doing it. 3) I managed to enable the local administrator account and get back into the box; failing all else, is there a quick way to migrate my old profile over to a new user?

  Read the article

• Server periodically freezing - Help Stabilizing

  - by JonDog

  We run an asp.net/sql server data collection website with a hand full of clients dumping data in and running reports. We moved to a new server (specs below) and have had issues with it freezing and having to reboot it a dozen times over the pass six months. The hosting company has mentioned possible causes (listed below) but cant give a definite answer on what is going wrong. They have offered to reconfigure how ever I like. We have benefited from having a much faster system and really dont want to get rid of the ssd's unless they are the issue. Two possible setup changes that I've talked with them about are also listed below. Any suggestions on what maybe causing the freezing issue as well as suggestion on a new setup would be great. My main questions are: Do SSD generally have problems running the OS & SQL Server on the same RAID Array? and Are the new SSD's still unrefined enough to be running in a production environment? Thanks Current: Xeon Quad Core E3-1270 3.40 Ghz 16 GB DDR3-1333 ECC SDRAM First Hard Drive: 120GB Intel SSD Second Hard Drive: 120GB Intel SSD Third Hard Drive: 120GB Intel SSD Fourth Hard Drive: 120GB Intel SSD SAS 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit MSSQL 2008 Web Edition Possible Causes: Running Sql Server & OS on same RAID Array OS Software Issues Using SSD's CPU Underpowered Not enough RAM Option 1 2x Xeon Quad Core E5-2603 1.80 GHz 16 GB DDR3-1333 ECC SDRAM 1 x 240GB Intel SSD - OS 3 x 1 TB SATA HDD (7200 RPM) - SQL Server SATA 4 Port RAID Card Windows 2012 Standard Edition - 64 Bit Option 2 Dell PowerEdge E3-1270v2 3.5GHz 4 Cores 16 GB DDR3-1600 UDIMM 4 x 128 GB Samsung 840 Pro SSD Add-in H200 (SAS/SATA Controller), 4 Hard Drives - RAID 10 Windows 2012 Standard Edition - 64 Bit

  Read the article

• Swapping RAID sets in and out of the same controller

  - by hazymat

  This is a really simple question, and the answer is probably encoded in various wikipedia articles, however my question is reasonably specific, and I need a bulletproof answer! I'm not sure if my question pertains to hardware RAID in general, or to the specific RAID controller I'm working on. Either way it is the Dell SAS 6/iR (this is an LSI sas1068e chipset). I simply want to: remove a set of striped (RAID 0) disks from this RAID controller in a server put in another set of disks, and create a RAID 1 array (or create a new 'virtual disk', as they call it in the SAS 6/iR manual) Do stuff with the new RAID 1 array Have the option of putting back the old set of disks (the RAID 0 striped ones) I am quite sure this is possible, but I need some form of reliable, evidence-based answer as it's for a client of mine, and I need to migrate their data safely. The question: can I actually do the above? Does the RAID configuration get stored on the disks themselves, or in the hardware controller? Is any data stored in the hardware controller? If there is any chance I cannot completely restore operation of the first set of disks I removed, then I need to know about it! The manual alludes to the answer to this question (see page 45 of this document), and talks about activating an array of disks. I just need someone to confirm I can definitely do the above. See, simple question, right? :)

  Read the article

• Enterprise level Ticketing and inventory system reccomendations [closed]

  - by TrackingSystem

  My company is sort off at a stand still when it comes to our technician ticketing and inventory system. We currently use Numara TrackIt! - which isn't cutting it to say the least. Dell recommended KACE, but it's web based which is what we would like to avoid. We need a good ticketing and inventory system with the following: Server/Client setup Client supports XP/Windows 7 Ent. Web Based as well as Client is a plus Technician ticketing Active Directory integration Inventory System (Asset tag tracking etc/PO tracking) Exchange integrated - when tickets are made you have an option to send to the requester. Something that will scale well Please, if anyone is a Systems Admin or has knowledge regarding use of a great ticketing system please let me know. We have a large international corporation - price honestly isn't an issue. Keep in mind this will be mainly used for technicians to create tickets, enter inventory(track PCS) and possible even an option to track purchase orders. We want an enterprise level ticketing system with these capabilities please help! Thank you.

  Read the article

• Install KVM based Windows 2008 remotely over SSH on a headless, no graphics Ubuntu 10.04 server?

  - by taazaa

  Hi, I have a Dell server at a remote data center with Ubuntu 10.04 as the host. It is a minimal install with the necessary virtulization packages. There is no X and the machine is headless. I have the win2008 DVD in the machine and want to remotely install it. I tried: virt-install --connect qemu:///system -n vmwin2k8 -r 1024 --disk path=server2k8.qcow2,size=50 --cdrom /dev/sr0 --vnc --noautoconsole --os-type windows --os-variant win2k8 The qcow2 image get created However I don't understand how to connect to see the install via VNC. This is my first time doing it so it may be trivial or may not be possible. Remotely I have a Win 7 machine with Putty and RealVNC viewer. Where is the graphic output of VNC going? Do I have to have VNC server running on the host or some other machine and then connect to it from my VNC client? Please let me know or point me to the right direction. I have been searching the web for several days to figure out how this is suppose to work. Thanks!

  Read the article

• Windows 7: resizing the 'Save As' window

  - by Mark Miller

  I do not know whether my question is appropriate for this forum. Apologies if it is not. I am running Windows 7 Professional with Service Pack 1 on a Dell Vostro 460 PC. I am downloading journal articles from the internet and saving them as *.pdf files. Somehow I unintentionally clicked a button that resulted in the 'Save as' window filling the entire screen of my computer, except for the toolbar at the very bottom. How can I resize the 'Save as' window so it only fills perhaps somewhere around 25% of the computer screen, or whatever the default size for that window is? I have searched the internet extensively and found one or two threads about this problem, but no specific solutions were posted there. One suggestion was to grab the bottom of the window with the mouse and scroll upward until the window was the desired size. That does not appear to be possible in my case. Another suggestion was to click on the window with the middle mouse button before attempting to resize the window, but that does not appear to help in my case either. Thank you for any help. If I should post this question in a different forum here please let me know, or kindly migrate the question to the appropriate forum. If additional information is necessary before a solution can be attempted, please let me know that as well.

  Read the article

• Lenovo Thinkpad T430 not booting from HDD if there is a USB modem connected

  - by user93353

  I have a T430 Levono Thinkpad running Win7. I use a ZTE USB modem (something like this) for my internet connection. I usually keep the modem plugged into the USB drive even when the laptop is shutdown or hibernating. This worked fine on my earlier laptops. But with the Lenovo, my laptop doesn't boot if the modem is in the USB drive. It shows the initial character based screen where it gives the Thinkpad message & BIOS details and then waits. If I pull out the modem, it goes ahead. I have disabled USB as a boot option in my BIOS settings, but even then this happens sometimes (but not all the times). Likewise while resuming from hibernation. The USB modem also has drivers & ISP connection client which getting installed the first time you use it on any machine. I have used multiple laptops (HP, DELL, Acer, Gateway) but never faced this problem before. I have friends who use other Thinkpad models but haven't faced this issue. Any resolutions, workarounds for this?

  Read the article

• When buying hardware, what sites do you trust for information? [closed]

  - by Matt Dawdy

  I won't ask "what laptop should I buy" since the information is likely to change very quickly. However, I am about to buy a laptop, and I honestly don't know where to begin researching this based on my needs. I am hoping that asking about specific sites that do reviews/recommendations that this will still be on topic. I read the 6 guidelines for subjective questions and believe that this question scores favorably. I'm starting a new job in a few weeks, and they want to know what specific laptop to purchase. I'd like to get the most for their money and get a machine that will not need to be replaced in a year. When looking at a site like Dell, it's hard to get a full picture of the performance of a laptop. Does it work with a docking station, and if so, what kinds of video outs are on it? Will it work well when compiling several large projects in .Net? Has anyone had any issues with the machine getting flaky when dragging it from work to home and back all the time? etc. So, if people would enter in their preferred sites they use when researching hardware, and why they prefer that site (x is great for laptop comparisons, y is great for gaming machine reviews, etc) the I hope that this can be a question with valuable answers to others than just myself.

  Read the article

• What can cause two "identical" setups of IE8 and XP to display things differently?

  - by ccornet

  This has been baffling me for a while. Of the machines I use in visitting Stack Overflow, two of them are machines with the same setup: Dell with Windows XP with IE8. Since they were issued to me by the same company (one to use in the office, one to use at home), they have identical setups as well. But they display certain page elements differently! One is an Optiplex GX620 desktop, the other is an Inspiron 9100 laptop, but somehow the hardware doesn't seem like something that should be overriding how my browser displays things. Nevertheless, the laptop seems to display things differently than what is expected. Differences have included the following: This issue persisted on the laptop after Jeff fixed it, but was repaired for everyone else and on the Desktop. When viewing Vote Counts on a post, the grey line is left immediately beneath the upvotes but a number-sized white space is below that before the downvotes. On the desktop, it displays properly with the two adjacent and divided by a grey line. Code blocks seem to have a blank line at the end on the laptop. The following image illustrates how the last two elements look on the laptop. So, considering that as far as I can tell, these two setups are identical (I have not messed with any settings and they were both initialized identically as well), what else could be causing the display difference?

  Read the article

• CentOS and OpenSSH [on hold]

  - by Stephen

  I've recently installed CentOS 6 on an old Dell PC. I'm trying to setup OpenSSH at the moment, I been following some tutorials (http://www.youtube.com/watch?v=QKafb0koJEg) on You Tube, while they have been very helpful I'm at the point where I need to ask some questions. My goal here is to be able to access the server from my work computer and from my personal laptop (which will be on the same home network as the server). I've installed OpenSSH with no issues. So the first thing I was advised to do was port forwarding. So in the sshd_config file, I've changed Port 22 to Port xxxx (where xxxx is a obviously a four digit value). I then restart the sshd service. I've also configured my router for forward port 22 onto xxxx. Is there anything else I need to do? I've generated the keys on my laptop, and I'm trying to copy them to the server as follows: scp id_rsa.pub xxxxxxxx@localhost:.ssh/authorized_keys but this command fails with the following error message: ssh: connect to host localhost port 22: Connection refused lost connection Any help appreciated. Regards...

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104  | Next Page >