Search Results

Search found 14989 results on 600 pages for 'street address'.

Page 98/600 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Organizations &amp; Architecture UNISA Studies &ndash; Chap 7

  - by MarkPearl

  Learning Outcomes Name different device categories Discuss the functions and structure of I/.O modules Describe the principles of Programmed I/O Describe the principles of Interrupt-driven I/O Describe the principles of DMA Discuss the evolution characteristic of I/O channels Describe different types of I/O interface Explain the principles of point-to-point and multipoint configurations Discuss the way in which a FireWire serial bus functions Discuss the principles of InfiniBand architecture External Devices An external device attaches to the computer by a link to an I/O module. The link is used to exchange control, status, and data between the I/O module and the external device. External devices can be classified into 3 categories… Human readable – e.g. video display Machine readable – e.g. magnetic disk Communications – e.g. wifi card I/O Modules An I/O module has two major functions… Interface to the processor and memory via the system bus or central switch Interface to one or more peripheral devices by tailored data links Module Functions The major functions or requirements for an I/O module fall into the following categories… Control and timing Processor communication Device communication Data buffering Error detection I/O function includes a control and timing requirement, to coordinate the flow of traffic between internal resources and external devices. Processor communication involves the following… Command decoding Data Status reporting Address recognition The I/O device must be able to perform device communication. This communication involves commands, status information, and data. An essential task of an I/O module is data buffering due to the relative slow speeds of most external devices. An I/O module is often responsible for error detection and for subsequently reporting errors to the processor. I/O Module Structure An I/O module functions to allow the processor to view a wide range of devices in a simple minded way. The I/O module may hide the details of timing, formats, and the electro mechanics of an external device so that the processor can function in terms of simple reads and write commands. An I/O channel/processor is an I/O module that takes on most of the detailed processing burden, presenting a high-level interface to the processor. There are 3 techniques are possible for I/O operations Programmed I/O Interrupt[t I/O DMA Access Programmed I/O When a processor is executing a program and encounters an instruction relating to I/O it executes that instruction by issuing a command to the appropriate I/O module. With programmed I/O, the I/O module will perform the requested action and then set the appropriate bits in the I/O status register. The I/O module takes no further actions to alert the processor. I/O Commands To execute an I/O related instruction, the processor issues an address, specifying the particular I/O module and external device, and an I/O command. There are four types of I/O commands that an I/O module may receive when it is addressed by a processor… Control – used to activate a peripheral and tell it what to do Test – Used to test various status conditions associated with an I/O module and its peripherals Read – Causes the I/O module to obtain an item of data from the peripheral and place it in an internal buffer Write – Causes the I/O module to take an item of data form the data bus and subsequently transmit that data item to the peripheral The main disadvantage of this technique is it is a time consuming process that keeps the processor busy needlessly I/O Instructions With programmed I/O there is a close correspondence between the I/O related instructions that the processor fetches from memory and the I/O commands that the processor issues to an I/O module to execute the instructions. Typically there will be many I/O devices connected through I/O modules to the system – each device is given a unique identifier or address – when the processor issues an I/O command, the command contains the address of the address of the desired device, thus each I/O module must interpret the address lines to determine if the command is for itself. When the processor, main memory and I/O share a common bus, two modes of addressing are possible… Memory mapped I/O Isolated I/O (for a detailed explanation read page 245 of book) The advantage of memory mapped I/O over isolated I/O is that it has a large repertoire of instructions that can be used, allowing more efficient programming. The disadvantage of memory mapped I/O over isolated I/O is that valuable memory address space is sued up. Interrupts driven I/O Interrupt driven I/O works as follows… The processor issues an I/O command to a module and then goes on to do some other useful work The I/O module will then interrupts the processor to request service when is is ready to exchange data with the processor The processor then executes the data transfer and then resumes its former processing Interrupt Processing The occurrence of an interrupt triggers a number of events, both in the processor hardware and in software. When an I/O device completes an I/O operations the following sequence of hardware events occurs… The device issues an interrupt signal to the processor The processor finishes execution of the current instruction before responding to the interrupt The processor tests for an interrupt – determines that there is one – and sends an acknowledgement signal to the device that issues the interrupt. The acknowledgement allows the device to remove its interrupt signal The processor now needs to prepare to transfer control to the interrupt routine. To begin, it needs to save information needed to resume the current program at the point of interrupt. The minimum information required is the status of the processor and the location of the next instruction to be executed. The processor now loads the program counter with the entry location of the interrupt-handling program that will respond to this interrupt. It also saves the values of the process registers because the Interrupt operation may modify these The interrupt handler processes the interrupt – this includes examination of status information relating to the I/O operation or other event that caused an interrupt When interrupt processing is complete, the saved register values are retrieved from the stack and restored to the registers Finally, the PSW and program counter values from the stack are restored. Design Issues Two design issues arise in implementing interrupt I/O Because there will be multiple I/O modules, how does the processor determine which device issued the interrupt? If multiple interrupts have occurred, how does the processor decide which one to process? Addressing device recognition, 4 general categories of techniques are in common use… Multiple interrupt lines Software poll Daisy chain Bus arbitration For a detailed explanation of these approaches read page 250 of the textbook. Interrupt driven I/O while more efficient than simple programmed I/O still requires the active intervention of the processor to transfer data between memory and an I/O module, and any data transfer must traverse a path through the processor. Thus is suffers from two inherent drawbacks… The I/O transfer rate is limited by the speed with which the processor can test and service a device The processor is tied up in managing an I/O transfer; a number of instructions must be executed for each I/O transfer Direct Memory Access When large volumes of data are to be moved, an efficient technique is direct memory access (DMA) DMA Function DMA involves an additional module on the system bus. The DMA module is capable of mimicking the processor and taking over control of the system from the processor. It needs to do this to transfer data to and from memory over the system bus. DMA must the bus only when the processor does not need it, or it must force the processor to suspend operation temporarily (most common – referred to as cycle stealing). When the processor wishes to read or write a block of data, it issues a command to the DMA module by sending to the DMA module the following information… Whether a read or write is requested using the read or write control line between the processor and the DMA module The address of the I/O device involved, communicated on the data lines The starting location in memory to read from or write to, communicated on the data lines and stored by the DMA module in its address register The number of words to be read or written, communicated via the data lines and stored in the data count register The processor then continues with other work, it delegates the I/O operation to the DMA module which transfers the entire block of data, one word at a time, directly to or from memory without going through the processor. When the transfer is complete, the DMA module sends an interrupt signal to the processor, this the processor is involved only at the beginning and end of the transfer. I/O Channels and Processors Characteristics of I/O Channels As one proceeds along the evolutionary path, more and more of the I/O function is performed without CPU involvement. The I/O channel represents an extension of the DMA concept. An I/O channel ahs the ability to execute I/O instructions, which gives it complete control over I/O operations. In a computer system with such devices, the CPU does not execute I/O instructions – such instructions are stored in main memory to be executed by a special purpose processor in the I/O channel itself. Two types of I/O channels are common A selector channel controls multiple high-speed devices. A multiplexor channel can handle I/O with multiple characters as fast as possible to multiple devices. The external interface: FireWire and InfiniBand Types of Interfaces One major characteristic of the interface is whether it is serial or parallel parallel interface – there are multiple lines connecting the I/O module and the peripheral, and multiple bits are transferred simultaneously serial interface – there is only one line used to transmit data, and bits must be transmitted one at a time With new generation serial interfaces, parallel interfaces are becoming less common. In either case, the I/O module must engage in a dialogue with the peripheral. In general terms the dialog may look as follows… The I/O module sends a control signal requesting permission to send data The peripheral acknowledges the request The I/O module transfers data The peripheral acknowledges receipt of data For a detailed explanation of FireWire and InfiniBand technology read page 264 – 270 of the textbook

  Read the article

• Two network interfaces and two IP addresses on the same subnet in Linux

  - by Scott Duckworth

  I recently ran into a situation where I needed two IP addresses on the same subnet assigned to one Linux host so that we could run two SSL/TLS sites. My first approach was to use IP aliasing, e.g. using eth0:0, eth0:1, etc, but our network admins have some fairly strict settings in place for security that squashed this idea: They use DHCP snooping and normally don't allow static IP addresses. Static addressing is accomplished by using static DHCP entries, so the same MAC address always gets the same IP assignment. This feature can be disabled per switchport if you ask and you have a reason for it (thankfully I have a good relationship with the network guys and this isn't hard to do). With the DHCP snooping disabled on the switchport, they had to put in a rule on the switch that said MAC address X is allowed to have IP address Y. Unfortunately this had the side effect of also saying that MAC address X is ONLY allowed to have IP address Y. IP aliasing required that MAC address X was assigned two IP addresses, so this didn't work. There may have been a way around these issues on the switch configuration, but in an attempt to preserve good relations with the network admins I tried to find another way. Having two network interfaces seemed like the next logical step. Thankfully this Linux system is a virtual machine, so I was able to easily add a second network interface (without rebooting, I might add - pretty cool). A few keystrokes later I had two network interfaces up and running and both pulled IP addresses from DHCP. But then the problem came in: the network admins could see (on the switch) the ARP entry for both interfaces, but only the first network interface that I brought up would respond to pings or any sort of TCP or UDP traffic. After lots of digging and poking, here's what I came up with. It seems to work, but it also seems to be a lot of work for something that seems like it should be simple. Any alternate ideas out there? Step 1: Enable ARP filtering on all interfaces: # sysctl -w net.ipv4.conf.all.arp_filter=1 # echo "net.ipv4.conf.all.arp_filter = 1" >> /etc/sysctl.conf From the file networking/ip-sysctl.txt in the Linux kernel docs: arp_filter - BOOLEAN 1 - Allows you to have multiple network interfaces on the same subnet, and have the ARPs for each interface be answered based on whether or not the kernel would route a packet from the ARP'd IP out that interface (therefore you must use source based routing for this to work). In other words it allows control of which cards (usually 1) will respond to an arp request. 0 - (default) The kernel can respond to arp requests with addresses from other interfaces. This may seem wrong but it usually makes sense, because it increases the chance of successful communication. IP addresses are owned by the complete host on Linux, not by particular interfaces. Only for more complex setups like load- balancing, does this behaviour cause problems. arp_filter for the interface will be enabled if at least one of conf/{all,interface}/arp_filter is set to TRUE, it will be disabled otherwise Step 2: Implement source-based routing I basically just followed directions from http://lartc.org/howto/lartc.rpdb.multiple-links.html, although that page was written with a different goal in mind (dealing with two ISPs). Assume that the subnet is 10.0.0.0/24, the gateway is 10.0.0.1, the IP address for eth0 is 10.0.0.100, and the IP address for eth1 is 10.0.0.101. Define two new routing tables named eth0 and eth1 in /etc/iproute2/rt_tables: ... top of file omitted ... 1 eth0 2 eth1 Define the routes for these two tables: # ip route add default via 10.0.0.1 table eth0 # ip route add default via 10.0.0.1 table eth1 # ip route add 10.0.0.0/24 dev eth0 src 10.0.0.100 table eth0 # ip route add 10.0.0.0/24 dev eth1 src 10.0.0.101 table eth1 Define the rules for when to use the new routing tables: # ip rule add from 10.0.0.100 table eth0 # ip rule add from 10.0.0.101 table eth1 The main routing table was already taken care of by DHCP (and it's not even clear that its strictly necessary in this case), but it basically equates to this: # ip route add default via 10.0.0.1 dev eth0 # ip route add 130.127.48.0/23 dev eth0 src 10.0.0.100 # ip route add 130.127.48.0/23 dev eth1 src 10.0.0.101 And voila! Everything seems to work just fine. Sending pings to both IP addresses works fine. Sending pings from this system to other systems and forcing the ping to use a specific interface works fine (ping -I eth0 10.0.0.1, ping -I eth1 10.0.0.1). And most importantly, all TCP and UDP traffic to/from either IP address works as expected. So again, my question is: is there a better way to do this? This seems like a lot of work for a seemingly simple problem.

  Read the article

• Adding and accessing custom sections in your C# App.config

  - by deadlydog

  So I recently thought I’d try using the app.config file to specify some data for my application (such as URLs) rather than hard-coding it into my app, which would require a recompile and redeploy of my app if one of our URLs changed.  By using the app.config it allows a user to just open up the .config file that sits beside their .exe file and edit the URLs right there and then re-run the app; no recompiling, no redeployment necessary. I spent a good few hours fighting with the app.config and looking at examples on Google before I was able to get things to work properly.  Most of the examples I found showed you how to pull a value from the app.config if you knew the specific key of the element you wanted to retrieve, but it took me a while to find a way to simply loop through all elements in a section, so I thought I would share my solutions here.   Simple and Easy The easiest way to use the app.config is to use the built-in types, such as NameValueSectionHandler.  For example, if we just wanted to add a list of database server urls to use in my app, we could do this in the app.config file like so: 1: <?xml version="1.0" encoding="utf-8" ?> 2: <configuration> 3: <configSections> 4: <section name="ConnectionManagerDatabaseServers" type="System.Configuration.NameValueSectionHandler" /> 5: </configSections> 6: <startup> 7: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" /> 8: </startup> 9: <ConnectionManagerDatabaseServers> 10: <add key="localhost" value="localhost" /> 11: <add key="Dev" value="Dev.MyDomain.local" /> 12: <add key="Test" value="Test.MyDomain.local" /> 13: <add key="Live" value="Prod.MyDomain.com" /> 14: </ConnectionManagerDatabaseServers> 15: </configuration>   And then you can access these values in code like so: 1: string devUrl = string.Empty; 2: var connectionManagerDatabaseServers = ConfigurationManager.GetSection("ConnectionManagerDatabaseServers") as NameValueCollection; 3: if (connectionManagerDatabaseServers != null) 4: { 5: devUrl = connectionManagerDatabaseServers["Dev"].ToString(); 6: }   Sometimes though you don’t know what the keys are going to be and you just want to grab all of the values in that ConnectionManagerDatabaseServers section.  In that case you can get them all like this: 1: // Grab the Environments listed in the App.config and add them to our list. 2: var connectionManagerDatabaseServers = ConfigurationManager.GetSection("ConnectionManagerDatabaseServers") as NameValueCollection; 3: if (connectionManagerDatabaseServers != null) 4: { 5: foreach (var serverKey in connectionManagerDatabaseServers.AllKeys) 6: { 7: string serverValue = connectionManagerDatabaseServers.GetValues(serverKey).FirstOrDefault(); 8: AddDatabaseServer(serverValue); 9: } 10: }   And here we just assume that the AddDatabaseServer() function adds the given string to some list of strings.  So this works great, but what about when we want to bring in more values than just a single string (or technically you could use this to bring in 2 strings, where the “key” could be the other string you want to store; for example, we could have stored the value of the Key as the user-friendly name of the url).   More Advanced (and more complicated) So if you want to bring in more information than a string or two per object in the section, then you can no longer simply use the built-in System.Configuration.NameValueSectionHandler type provided for us.  Instead you have to build your own types.  Here let’s assume that we again want to configure a set of addresses (i.e. urls), but we want to specify some extra info with them, such as the user-friendly name, if they require SSL or not, and a list of security groups that are allowed to save changes made to these endpoints. So let’s start by looking at the app.config: 1: <?xml version="1.0" encoding="utf-8" ?> 2: <configuration> 3: <configSections> 4: <section name="ConnectionManagerDataSection" type="ConnectionManagerUpdater.Data.Configuration.ConnectionManagerDataSection, ConnectionManagerUpdater" /> 5: </configSections> 6: <startup> 7: <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5" /> 8: </startup> 9: <ConnectionManagerDataSection> 10: <ConnectionManagerEndpoints> 11: <add name="Development" address="Dev.MyDomain.local" useSSL="false" /> 12: <add name="Test" address="Test.MyDomain.local" useSSL="true" /> 13: <add name="Live" address="Prod.MyDomain.com" useSSL="true" securityGroupsAllowedToSaveChanges="ConnectionManagerUsers" /> 14: </ConnectionManagerEndpoints> 15: </ConnectionManagerDataSection> 16: </configuration>   The first thing to notice here is that my section is now using the type “ConnectionManagerUpdater.Data.Configuration.ConnectionManagerDataSection” (the fully qualified path to my new class I created) “, ConnectionManagerUpdater” (the name of the assembly my new class is in).  Next, you will also notice an extra layer down in the <ConnectionManagerDataSection> which is the <ConnectionManagerEndpoints> element.  This is a new collection class that I created to hold each of the Endpoint entries that are defined.  Let’s look at that code now: 1: using System; 2: using System.Collections.Generic; 3: using System.Configuration; 4: using System.Linq; 5: using System.Text; 6: using System.Threading.Tasks; 7:  8: namespace ConnectionManagerUpdater.Data.Configuration 9: { 10: public class ConnectionManagerDataSection : ConfigurationSection 11: { 12: /// <summary> 13: /// The name of this section in the app.config. 14: /// </summary> 15: public const string SectionName = "ConnectionManagerDataSection"; 16: 17: private const string EndpointCollectionName = "ConnectionManagerEndpoints"; 18:  19: [ConfigurationProperty(EndpointCollectionName)] 20: [ConfigurationCollection(typeof(ConnectionManagerEndpointsCollection), AddItemName = "add")] 21: public ConnectionManagerEndpointsCollection ConnectionManagerEndpoints { get { return (ConnectionManagerEndpointsCollection)base[EndpointCollectionName]; } } 22: } 23:  24: public class ConnectionManagerEndpointsCollection : ConfigurationElementCollection 25: { 26: protected override ConfigurationElement CreateNewElement() 27: { 28: return new ConnectionManagerEndpointElement(); 29: } 30: 31: protected override object GetElementKey(ConfigurationElement element) 32: { 33: return ((ConnectionManagerEndpointElement)element).Name; 34: } 35: } 36: 37: public class ConnectionManagerEndpointElement : ConfigurationElement 38: { 39: [ConfigurationProperty("name", IsRequired = true)] 40: public string Name 41: { 42: get { return (string)this["name"]; } 43: set { this["name"] = value; } 44: } 45: 46: [ConfigurationProperty("address", IsRequired = true)] 47: public string Address 48: { 49: get { return (string)this["address"]; } 50: set { this["address"] = value; } 51: } 52: 53: [ConfigurationProperty("useSSL", IsRequired = false, DefaultValue = false)] 54: public bool UseSSL 55: { 56: get { return (bool)this["useSSL"]; } 57: set { this["useSSL"] = value; } 58: } 59: 60: [ConfigurationProperty("securityGroupsAllowedToSaveChanges", IsRequired = false)] 61: public string SecurityGroupsAllowedToSaveChanges 62: { 63: get { return (string)this["securityGroupsAllowedToSaveChanges"]; } 64: set { this["securityGroupsAllowedToSaveChanges"] = value; } 65: } 66: } 67: }   So here the first class we declare is the one that appears in the <configSections> element of the app.config.  It is ConnectionManagerDataSection and it inherits from the necessary System.Configuration.ConfigurationSection class.  This class just has one property (other than the expected section name), that basically just says I have a Collection property, which is actually a ConnectionManagerEndpointsCollection, which is the next class defined.  The ConnectionManagerEndpointsCollection class inherits from ConfigurationElementCollection and overrides the requied fields.  The first tells it what type of Element to create when adding a new one (in our case a ConnectionManagerEndpointElement), and a function specifying what property on our ConnectionManagerEndpointElement class is the unique key, which I’ve specified to be the Name field. The last class defined is the actual meat of our elements.  It inherits from ConfigurationElement and specifies the properties of the element (which can then be set in the xml of the App.config).  The “ConfigurationProperty” attribute on each of the properties tells what we expect the name of the property to correspond to in each element in the app.config, as well as some additional information such as if that property is required and what it’s default value should be. Finally, the code to actually access these values would look like this: 1: // Grab the Environments listed in the App.config and add them to our list. 2: var connectionManagerDataSection = ConfigurationManager.GetSection(ConnectionManagerDataSection.SectionName) as ConnectionManagerDataSection; 3: if (connectionManagerDataSection != null) 4: { 5: foreach (ConnectionManagerEndpointElement endpointElement in connectionManagerDataSection.ConnectionManagerEndpoints) 6: { 7: var endpoint = new ConnectionManagerEndpoint() { Name = endpointElement.Name, ServerInfo = new ConnectionManagerServerInfo() { Address = endpointElement.Address, UseSSL = endpointElement.UseSSL, SecurityGroupsAllowedToSaveChanges = endpointElement.SecurityGroupsAllowedToSaveChanges.Split(',').Where(e => !string.IsNullOrWhiteSpace(e)).ToList() } }; 8: AddEndpoint(endpoint); 9: } 10: } This looks very similar to what we had before in the “simple” example.  The main points of interest are that we cast the section as ConnectionManagerDataSection (which is the class we defined for our section) and then iterate over the endpoints collection using the ConnectionManagerEndpoints property we created in the ConnectionManagerDataSection class.   Also, some other helpful resources around using app.config that I found (and for parts that I didn’t really explain in this article) are: How do you use sections in C# 4.0 app.config? (Stack Overflow) <== Shows how to use Section Groups as well, which is something that I did not cover here, but might be of interest to you. How to: Create Custom Configuration Sections Using Configuration Section (MSDN) ConfigurationSection Class (MSDN) ConfigurationCollectionAttribute Class (MSDN) ConfigurationElementCollection Class (MSDN)   I hope you find this helpful.  Feel free to leave a comment.  Happy Coding!

  Read the article

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• In Exim, is RBL spam rejected prior to being scanned by SpamAssassin?

  - by user955664

  I've recently been battling spam issues on our mail server. One account in particular was getting hammered with incoming spam. SpamAssassin's memory use is one of our concerns. What I've done is enable RBLs in Exim. I now see many rejection notices in the Exim log based on the various RBLs, which is good. However, when I run Eximstats, the numbers seem to be the same as they were prior to the enabling of the RBLs. I am assuming because the email is still logged in some way prior to the rejection. Is that what's happening, or am I missing something else? Does anyone know if these emails are rejected prior to being processed by SpamAssassin? Or does anyone know how I'd be able to find out? Is there a standard way to generate SpamAssassin stats, similar to Eximstats, so that I could compare the numbers? Thank you for your time and any advice. Edit: Here is the ACL section of my Exim configuration file ###################################################################### # ACLs # ###################################################################### begin acl # ACL that is used after the RCPT command check_recipient: # to block certain wellknown exploits, Deny for local domains if # local parts begin with a dot or contain @ % ! / | deny domains = +local_domains local_parts = ^[.] : ^.*[@%!/|] # to restrict port 587 to authenticated users only # see also daemon_smtp_ports above accept hosts = +auth_relay_hosts condition = ${if eq {$interface_port}{587} {yes}{no}} endpass message = relay not permitted, authentication required authenticated = * # allow local users to send outgoing messages using slashes # and vertical bars in their local parts. # Block outgoing local parts that begin with a dot, slash, or vertical # bar but allows them within the local part. # The sequence \..\ is barred. The usage of @ % and ! is barred as # before. The motivation is to prevent your users (or their virii) # from mounting certain kinds of attacks on remote sites. deny domains = !+local_domains local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./ # local source whitelist # accept if the source is local SMTP (i.e. not over TCP/IP). # Test for this by testing for an empty sending host field. accept hosts = : # sender domains whitelist # accept if sender domain is in whitelist accept sender_domains = +whitelist_domains # sender hosts whitelist # accept if sender host is in whitelist accept hosts = +whitelist_hosts accept hosts = +whitelist_hosts_ip # envelope senders whitelist # accept if envelope sender is in whitelist accept senders = +whitelist_senders # accept mail to postmaster in any local domain, regardless of source accept local_parts = postmaster domains = +local_domains # accept mail to abuse in any local domain, regardless of source accept local_parts = abuse domains = +local_domains # accept mail to hostmaster in any local domain, regardless of source accept local_parts = hostmaster domains =+local_domains # OPTIONAL MODIFICATIONS: # If the page you're using to notify senders of blocked email of how # to get their address unblocked will use a web form to send you email so # you'll know to unblock those senders, then you may leave these lines # commented out. However, if you'll be telling your senders of blocked # email to send an email to [email protected], then you should # replace "errors" with the left side of the email address you'll be # using, and "example.com" with the right side of the email address and # then uncomment the second two lines, leaving the first one commented. # Doing this will mean anyone can send email to this specific address, # even if they're at a blocked domain, and even if your domain is using # blocklists. # accept mail to [email protected], regardless of source # accept local_parts = errors # domains = example.com # deny so-called "legal" spammers" deny message = Email blocked by LBL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains sender_domains = +blacklist_domains # deny using hostname in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts # deny using IP in bad_sender_hosts blacklist deny message = Email blocked by BSHL - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains hosts = +bad_sender_hosts_ip # deny using email address in blacklist_senders deny message = Email blocked by BSAL - to unblock see http://www.example.com/ domains = +use_rbl_domains senders = +blacklist_senders # By default we do NOT require sender verification. # Sender verification denies unless sender address can be verified: # If you want to require sender verification, i.e., that the sending # address is routable and mail can be delivered to it, then # uncomment the next line. If you do not want to require sender # verification, leave the line commented out #require verify = sender # deny using .spamhaus deny message = Email blocked by SPAMHAUS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = sbl.spamhaus.org # deny using ordb # deny message = Email blocked by ORDB - to unblock see http://www.example.com/ # # only for domains that do want to be tested against RBLs # domains = +use_rbl_domains # dnslists = relays.ordb.org # deny using sorbs smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ # only for domains that do want to be tested against RBLs domains = +use_rbl_domains dnslists = dnsbl.sorbs.net=127.0.0.5 # Next deny stuff from more "fuzzy" blacklists # but do bypass all checking for whitelisted host names # and for authenticated users # deny using spamcop deny message = Email blocked by SPAMCOP - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = bl.spamcop.net # deny using njabl deny message = Email blocked by NJABL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.njabl.org # deny using cbl deny message = Email blocked by CBL - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = cbl.abuseat.org # deny using all other sorbs ip-based blocklist besides smtp list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ hosts = !+relay_hosts domains = +use_rbl_domains !authenticated = * dnslists = dnsbl.sorbs.net!=127.0.0.6 # deny using sorbs name based list deny message = Email blocked by SORBS - to unblock see http://www.example.com/ domains =+use_rbl_domains # rhsbl list is name based dnslists = rhsbl.sorbs.net/$sender_address_domain # accept if address is in a local domain as long as recipient can be verified accept domains = +local_domains endpass message = "Unknown User" verify = recipient # accept if address is in a domain for which we relay as long as recipient # can be verified accept domains = +relay_domains endpass verify=recipient # accept if message comes for a host for which we are an outgoing relay # recipient verification is omitted because many MUA clients don't cope # well with SMTP error responses. If you are actually relaying from MTAs # then you should probably add recipient verify here accept hosts = +relay_hosts accept hosts = +auth_relay_hosts endpass message = authentication required authenticated = * deny message = relay not permitted # default at end of acl causes a "deny", but line below will give # an explicit error message: deny message = relay not permitted # ACL that is used after the DATA command check_message: accept

  Read the article

• Creating PHP Forms with show/hide functionality [migrated]

  - by ronquiq

  I want to create two reports and submit the report data to database by using two functions defined in a class: Here I have two buttons: "Create ES" and "Create RP". Rightnow, my forms are working fine, I can insert data successfully, but the problem was when I click on submit after filling the form data, the content is hiding and displays the fist div content "cs_content" and again I need to onclick to submit again. Could anyone give a solution for this. Requirement : When I click on "Create CS", I should be able to fill the form and submit data successfully with a message within "cs_content" and any form input errors, the errors should display within "cs_content". When I click on "Create RP", I should be able to fill the form and submit data successfully with a message within "rp_content" and any form input errors, the errors should display within "rp_content". home.php <?php require 'classes/class.report.php'; $report = new Report($db); ?> <html> <head> <script src="js/jqueryv1.10.2.js"></script> <script> $ (document).ready(function () { //$("#cs_content").show(); $('#cs').click(function () { $('#cs_content').fadeIn('slow'); $('#rp_content').hide(); }); $('#rp').click(function () { $('#rp_content').fadeIn('slow'); $('#cs_content').hide(); }); }); </script> </head> <body> <div class="container2"> <div style="margin:0px 0px;padding:3px 217px;overflow:hidden;"> <div id="cs" style="float:left;margin:0px 0px;padding:7px;"><input type="button" value="CREATE CS"></div> <div id="rp" style="float:left;margin:0px 0px;padding:7px;"><input type="button" value="CREATE RP"></div><br> </div> <div id="cs_content"> <?php $report->create_cs_report(); ?> </div> <div id="rp_content" style="display:none;"> <?php $report->create_rp_report(); ?> </div> </div> </body> </html> class.report.php <?php class Report { private $db; public function __construct($database){ $this->db = $database; } public function create_cs_report() { if (isset($_POST['create_es_report'])) { $report_name = htmlentities($_POST['report_name']); $from_address = htmlentities($_POST['from_address']); $subject = htmlentities($_POST['subject']); $reply_to = htmlentities($_POST['reply_to']); if (empty($_POST['report_name']) || empty($_POST['from_address']) || empty($_POST['subject']) || empty($_POST['reply_to'])) { $errors[] = '<span class="error">All fields are required.</span>'; } else { if (isset($_POST['report_name']) && empty($_POST['report_name'])) { $errors[] = '<span class="error">Report Name is required</span>'; } else if (!ctype_alnum($_POST['report_name'])) { $errors[] = '<span class="error">Report Name: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['from_address']) && empty($_POST['from_address'])) { $errors[] = '<span class="error">From address is required</span>'; } else if (filter_var($_POST['from_address'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid From address</span>'; } if (isset($_POST['subject']) && empty($_POST['subject'])) { $errors[] = '<span class="error">Subject is required</span>'; } else if (!ctype_alnum($_POST['subject'])) { $errors[] = '<span class="error">Subject: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['reply_to']) && empty($_POST['reply_to'])) { $errors[] = '<span class="error">Reply To is required</span>'; } else if (filter_var($_POST['reply_to'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid Reply-To address</span>'; } } if (empty($errors) === true) { $query = $this->db->prepare("INSERT INTO report(report_name, from_address, subject, reply_to) VALUES (?, ?, ?, ?) "); $query->bindValue(1, $report_name); $query->bindValue(2, $from_address); $query->bindValue(3, $subject); $query->bindValue(4, $reply_to); try { $query->execute(); } catch(PDOException $e) { die($e->getMessage()); } header('Location:home.php?success'); exit(); } } if (isset($_GET['success']) && empty($_GET['success'])) { header('Location:home.php'); echo '<span class="error">Report is succesfully created</span>'; } ?> <form action="" method="POST" accept-charset="UTF-8"> <div style="font-weight:bold;padding:17px 80px;text-decoration:underline;">Section A</div> <table class="create_report"> <tr><td><label>Report Name</label><span style="color:#A60000">*</span></td> <td><input type="text" name="report_name" required placeholder="Name of the report" value="<?php if(isset($_POST["report_name"])) echo $report_name; ?>" size="30" maxlength="30"> </td></tr> <tr><td><label>From</label><span style="color:#A60000">*</span></td> <td><input type="text" name="from_address" required placeholder="From address" value="<?php if(isset($_POST["from_address"])) echo $from_address; ?>" size="30"> </td></tr> <tr><td><label>Subject</label><span style="color:#A60000">*</span></td> <td><input type="text" name="subject" required placeholder="Subject" value="<?php if(isset($_POST["subject"])) echo $subject; ?>" size="30"> </td></tr> <tr><td><label>Reply To</label><span style="color:#A60000">*</span></td> <td><input type="text" name="reply_to" required placeholder="Reply address" value="<?php if(isset($_POST["reply_to"])) echo $reply_to; ?>" size="30"> </td></tr> <tr><td><input type="submit" value="create report" style="background:#8AC007;color:#080808;padding:6px;" name="create_es_report"></td></tr> </table> </form> <?php //IF THERE ARE ERRORS, THEY WOULD BE DISPLAY HERE if (empty($errors) === false) { echo '<div>' . implode('</p><p>', $errors) . '</div>'; } } public function create_rp_report() { if (isset($_POST['create_rp_report'])) { $report_name = htmlentities($_POST['report_name']); $to_address = htmlentities($_POST['to_address']); $subject = htmlentities($_POST['subject']); $reply_to = htmlentities($_POST['reply_to']); if (empty($_POST['report_name']) || empty($_POST['to_address']) || empty($_POST['subject']) || empty($_POST['reply_to'])) { $errors[] = '<span class="error">All fields are required.</span>'; } else { if (isset($_POST['report_name']) && empty($_POST['report_name'])) { $errors[] = '<span class="error">Report Name is required</span>'; } else if (!ctype_alnum($_POST['report_name'])) { $errors[] = '<span class="error">Report Name: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['to_address']) && empty($_POST['to_address'])) { $errors[] = '<span class="error">to address is required</span>'; } else if (filter_var($_POST['to_address'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid to address</span>'; } if (isset($_POST['subject']) && empty($_POST['subject'])) { $errors[] = '<span class="error">Subject is required</span>'; } else if (!ctype_alnum($_POST['subject'])) { $errors[] = '<span class="error">Subject: Whitespace is not allowed, only alphabets and numbers are required</span>'; } if (isset($_POST['reply_to']) && empty($_POST['reply_to'])) { $errors[] = '<span class="error">Reply To is required</span>'; } else if (filter_var($_POST['reply_to'], FILTER_VALIDATE_EMAIL) === false) { $errors[] = '<span class="error">Please enter a valid Reply-To address</span>'; } } if (empty($errors) === true) { $query = $this->db->prepare("INSERT INTO report(report_name, to_address, subject, reply_to) VALUES (?, ?, ?, ?) "); $query->bindValue(1, $report_name); $query->bindValue(2, $to_address); $query->bindValue(3, $subject); $query->bindValue(4, $reply_to); try { $query->execute(); } catch(PDOException $e) { die($e->getMessage()); } header('Location:home.php?success'); exit(); } } if (isset($_GET['success']) && empty($_GET['success'])) { header('Location:home.php'); echo '<span class="error">Report is succesfully created</span>'; } ?> <form action="" method="POST" accept-charset="UTF-8"> <div style="font-weight:bold;padding:17px 80px;text-decoration:underline;">Section A</div> <table class="create_report"> <tr><td><label>Report Name</label><span style="color:#A60000">*</span></td> <td><input type="text" name="report_name" required placeholder="Name of the report" value="<?php if(isset($_POST["report_name"])) echo $report_name; ?>" size="30" maxlength="30"> </td></tr> <tr><td><label>to</label><span style="color:#A60000">*</span></td> <td><input type="text" name="to_address" required placeholder="to address" value="<?php if(isset($_POST["to_address"])) echo $to_address; ?>" size="30"> </td></tr> <tr><td><label>Subject</label><span style="color:#A60000">*</span></td> <td><input type="text" name="subject" required placeholder="Subject" value="<?php if(isset($_POST["subject"])) echo $subject; ?>" size="30"> </td></tr> <tr><td><label>Reply To</label><span style="color:#A60000">*</span></td> <td><input type="text" name="reply_to" required placeholder="Reply address" value="<?php if(isset($_POST["reply_to"])) echo $reply_to; ?>" size="30"> </td></tr> <tr><td><input type="submit" value="create report" style="background:#8AC007;color:#080808;padding:6px;" name="create_rp_report"></td></tr> </table> </form> <?php //IF THERE ARE ERRORS, THEY WOULD BE DISPLAY HERE if (empty($errors) === false) { echo '<div>' . implode('</p><p>', $errors) . '</div>'; } } }//Report CLASS ENDS

  Read the article

• Creating a Reverse Proxy using Jpcap

  - by Ramon Marco Navarro

  I need to create a program that receives HTTP request and forwards those requests to the web servers. I have successfully made this using only Java Sockets but the client needed the program to be implemented in Jpcap. I'd like to know if this is possible and what literature I should be reading for this project. This is what I have now by stitching together pieces from the Jpcap tutorial: import java.net.InetAddress; import java.io.*; import jpcap.*; import jpcap.packet.*; public class Router { public static void main(String args[]) { //Obtain the list of network interfaces NetworkInterface[] devices = JpcapCaptor.getDeviceList(); //for each network interface for (int i = 0; i < devices.length; i++) { //print out its name and description System.out.println(i+": "+devices[i].name + "(" + devices[i].description+")"); //print out its datalink name and description System.out.println(" datalink: "+devices[i].datalink_name + "(" + devices[i].datalink_description+")"); //print out its MAC address System.out.print(" MAC address:"); for (byte b : devices[i].mac_address) System.out.print(Integer.toHexString(b&0xff) + ":"); System.out.println(); //print out its IP address, subnet mask and broadcast address for (NetworkInterfaceAddress a : devices[i].addresses) System.out.println(" address:"+a.address + " " + a.subnet + " "+ a.broadcast); } int index = 1; // set index of the interface that you want to open. //Open an interface with openDevice(NetworkInterface intrface, int snaplen, boolean promics, int to_ms) JpcapCaptor captor = null; try { captor = JpcapCaptor.openDevice(devices[index], 65535, false, 20); captor.setFilter("port 80 and host 192.168.56.1", true); } catch(java.io.IOException e) { System.err.println(e); } //call processPacket() to let Jpcap call PacketPrinter.receivePacket() for every packet capture. captor.loopPacket(-1,new PacketPrinter()); captor.close(); } } class PacketPrinter implements PacketReceiver { //this method is called every time Jpcap captures a packet public void receivePacket(Packet p) { JpcapSender sender = null; try { NetworkInterface[] devices = JpcapCaptor.getDeviceList(); sender = JpcapSender.openDevice(devices[1]); } catch(IOException e) { System.err.println(e); } IPPacket packet = (IPPacket)p; try { // IP Address of machine sending HTTP requests (the client) // It's still on the same LAN as the servers for testing purposes. packet.dst_ip = InetAddress.getByName("192.168.56.2"); } catch(java.net.UnknownHostException e) { System.err.println(e); } //create an Ethernet packet (frame) EthernetPacket ether=new EthernetPacket(); //set frame type as IP ether.frametype=EthernetPacket.ETHERTYPE_IP; //set source and destination MAC addresses // MAC Address of machine running reverse proxy server ether.src_mac = new MacAddress("08:00:27:00:9C:80").getAddress(); // MAC Address of machine running web server ether.dst_mac = new MacAddress("08:00:27:C7:D2:4C").getAddress(); //set the datalink frame of the packet as ether packet.datalink=ether; //send the packet sender.sendPacket(packet); sender.close(); //just print out a captured packet System.out.println(packet); } } Any help would be greatly appreciated. Thank you.

  Read the article

• Validation Summary for Lists using Data Annotations with MVC

  - by David Liddle

  I currently use a custom method to display validation error messages for lists but would like to replace this system for using with Data Annotations. In summary on validation of my form, I want to display "*" next to each input that is incorrect and also provide a Validation Summary at the bottom that relates each error message to the particular item in the list. e.g. say if validation failed on the 2nd list item on a Name input box and the 4th item on an Address input box the validation summary would display [2] Name is invalid [4] Address is invalid Please ignore if there are mistakes in the code below. I'm just writing this as an example. The code below shows how I was able to do it using my custom version of adding model errors but was wondering how to do this using Data Annotations? //Domain Object public class MyObject { public int ID { get; set; } public string Name { get; set; } public string Address { get; set; } public bool IsValid { get { return (GetRuleViolations().Count() == 0); } } public void IEnumerable<RuleViolation> GetRuleViolations() { if (String.IsNullOrEmpty(Name)) yield return new RuleViolation(ID, "Name", "Name is invalid"); if (String.IsNullOrEmpty(Address)) yield return new RuleViolation(ID, "Address", "Address is invalid"); yield break; } } //Rule Violation public class RuleViolation { public int ID { get; private set; } public string PropertyName { get; private set; } public string ErrorMessage { get; private set; } } //View <% for (int i = 0; i < 5; i++) { %> <p> <%= Html.Hidden("myObjects[" + i + "].ID", i) %> Name: <%= Html.TextBox("myObjects[" + i + "].Name") %> <br /> <%= Html.ValidationMessage("myObjects[" + i + "].Name", "*")<br /> Address: <%= Html.TextBox("myObjects[" + i + "].Address") %> <%= Html.ValidationMessage("myObjects[" + i + "].Address", "*")<br /> </p> <% } %> <p><%= Html.ValidationSummary() %> //Controller public ActionResult MyAction(IList<MyObject> myObjects) { foreach (MyObject o in myObjects) { if (!o.IsValid) ModelState.AddModelErrors(o.GetRuleViolations(), o.GetType().Name); } if (!Model.IsValid) { return View(); } } public static class ModelStateExtensions { public static void AddModelError(this ModelStateDictionary modelState, RuleViolation issue, string name) { string key = String.Format("{0}[{1}].{2}", name, issue.ID, issue.PropertyName); string error = String.Format("[{0}] {1}", (issue.ID + 1), issue.ErrorMessage); //above line determines the [ID] ErrorMessage to be //displayed in the Validation Summary modelState.AddModelError(key, error); }

  Read the article

• WCF Service error on IIS with metadata

  - by Bruno Silva

  Hi, I'm trying to publish a service to IIS, it builds and runs OK on the ASP.NET dev server. When running in IIS I can get to the metadata by navigating to the service or by adding service reference in Visual Studio. But when I call a method from my client app it crashes with a internal server error. So I went to the Event Log and found this: WebHost failed to process a request. Sender Information: System.ServiceModel.Activation.HostedHttpRequestAsyncResult/8810861 Exception: System.Web.HttpException (0x80004005): There was no channel actively listening at 'http://mysite.net/soundhubservice.svc/$metadata'. This is often caused by an incorrect address URI. Ensure that the address to which the message is sent matches an address on which a service is listening. ---> System.ServiceModel.EndpointNotFoundException: There was no channel actively listening at 'http://mysite.net/soundhubservice.svc/$metadata'. This is often caused by an incorrect address URI. Ensure that the address to which the message is sent matches an address on which a service is listening. at System.ServiceModel.Activation.HostedHttpTransportManager.HttpContextReceived(HostedHttpRequestAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.HandleRequest() at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.BeginRequest() at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result) at System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) Process Name: w3wp Process ID: 1080 My Web.Config looks something like this: <configuration> <system.web> <compilation debug="true" targetFramework="4.0" /> </system.web> <system.serviceModel> <services> <service name="SoundHub.Services.SoundHubService" behaviorConfiguration="StreamingServiceBehavior"> <host> <baseAddresses> <add baseAddress="http://localhost/SoundHubServive"/> </baseAddresses> </host> <endpoint address="service" binding="basicHttpBinding" bindingConfiguration="httpBuffering" contract="SoundHub.Services.ISoundHubService"/> <endpoint address="stream" binding="basicHttpBinding" bindingConfiguration="HttpStreaming" contract="SoundHub.Services.ISoundHubStreamService"/> <!--<endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange" />--> </service> </services> <bindings> <basicHttpBinding> <binding name="HttpStreaming" maxReceivedMessageSize="67108864" transferMode="Streamed"/> <binding name="httpBuffering" transferMode="Buffered" /> </basicHttpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="StreamingServiceBehavior"> <serviceMetadata httpGetEnabled="True"/> <serviceDebug includeExceptionDetailInFaults="False"/> </behavior> </serviceBehaviors> </behaviors> </system.serviceModel> <system.webServer> <modules runAllManagedModulesForAllRequests="true"/> </system.webServer> </configuration> Tried several combinations of settings I found while searching online but nothing helped, always the same error. Thanks Bruno

  Read the article

• I'm trying to pass a string from my first ViewController to my second ViewController but it returns NULL

  - by Dashony

  In my first view controller I have 3 input fields each of them take the user input into and saves it into a string such as: address, username and password as NSUserDefaults. This part works fine. In my second view controller I'm trying to take the 3 strings from first controller (address, username and password) create a html link based on the 3 strings. I've tried many ways to access the 3 strings with no luck, the result I get is NULL. Here is my code: //.h file - first view controller with the 3 input fields CamSetup.h #import <UIKit/UIKit.h> @interface CamSetup : UIViewController <UITextFieldDelegate> { NSString * address; NSString * username; NSString * password; IBOutlet UITextField * addressField; IBOutlet UITextField * usernameField; IBOutlet UITextField * passwordField; } -(IBAction) saveAddress: (id) sender; -(IBAction) saveUsername: (id) sender; -(IBAction) savePassword: (id) sender; @property(nonatomic, retain) UITextField *addressField; @property(nonatomic, retain) UITextField *usernameField; @property(nonatomic, retain) UITextField *passwordField; @property(nonatomic, retain) NSString *address; @property(nonatomic, retain) NSString *username; @property(nonatomic, retain) NSString *password; @end //.m file - first view controller CamSetup.m #import "CamSetup.h" @interface CamSetup () @end @implementation CamSetup @synthesize addressField, usernameField, passwordField, address, username, password; -(IBAction) saveAddress: (id) sender { address = [[NSString alloc] initWithFormat:addressField.text]; [addressField setText:address]; NSUserDefaults *stringDefaultAddress = [NSUserDefaults standardUserDefaults]; [stringDefaultAddress setObject:address forKey:@"stringKey1"]; NSLog(@"String [%@]", address); } -(IBAction) saveUsername: (id) sender { username = [[NSString alloc] initWithFormat:usernameField.text]; [usernameField setText:username]; NSUserDefaults *stringDefaultUsername = [NSUserDefaults standardUserDefaults]; [stringDefaultUsername setObject:username forKey:@"stringKey2"]; NSLog(@"String [%@]", username); } -(IBAction) savePassword: (id) sender { password = [[NSString alloc] initWithFormat:passwordField.text]; [passwordField setText:password]; NSUserDefaults *stringDefaultPassword = [NSUserDefaults standardUserDefaults]; [stringDefaultPassword setObject:password forKey:@"stringKey3"]; NSLog(@"String [%@]", password); } - (void)viewDidLoad { [addressField setText:[[NSUserDefaults standardUserDefaults] objectForKey:@"stringKey1"]]; [usernameField setText:[[NSUserDefaults standardUserDefaults] objectForKey:@"stringKey2"]]; [passwordField setText:[[NSUserDefaults standardUserDefaults] objectForKey:@"stringKey3"]]; [super viewDidLoad]; } @end //.h second view controller LiveView.h #import <UIKit/UIKit.h> #import "CamSetup.h" @interface LiveView : UIViewController { NSString *theAddress; NSString *theUsername; NSString *thePassword; CamSetup *camsetup; //here is an instance of the first class } @property (nonatomic, retain) NSString *theAddress; @property (nonatomic, retain) NSString *theUsername; @property (nonatomic, retain) NSString *thePassword; @end //.m second view LiveView.m file #import "LiveView.h" @interface LiveView () @end @implementation LiveView @synthesize theAddress, theUsername, thePassword; - (void)viewDidLoad { [super viewDidLoad]; theUsername = camsetup.username; //this is probably not right? NSLog(@"String [%@]", theUsername); //resut here is NULL NSLog(@"String [%@]", camsetup.username); //and here NULL as well } @end

  Read the article

• SQL SERVER – SSMS Automatically Generates TOP (100) PERCENT in Query Designer

  - by pinaldave

  Earlier this week, I was surfing various SQL forums to see what kind of help developer need in the SQL Server world. One of the question indeed caught my attention. I am here regenerating complete question as well scenario to illustrate the point in a precise manner. Additionally, I have added added second part of the question to give completeness. Question: I am trying to create a view in Query Designer (not in the New Query Window). Every time I am trying to create a view it always adds  TOP (100) PERCENT automatically on the T-SQL script. No matter what I do, it always automatically adds the TOP (100) PERCENT to the script. I have attempted to copy paste from notepad, build a query and a few other things – there is no success. I am really not sure what I am doing wrong with Query Designer. Here is my query script: (I use AdventureWorks as a sample database) SELECT Person.Address.AddressID FROM Person.Address INNER JOIN Person.AddressType ON Person.Address.AddressID = Person.AddressType.AddressTypeID ORDER BY Person.Address.AddressID This script automatically replaces by following query: SELECT TOP (100) PERCENT Person.Address.AddressID FROM Person.Address INNER JOIN Person.AddressType ON Person.Address.AddressID = Person.AddressType.AddressTypeID ORDER BY Person.Address.AddressID However, when I try to do the same from New Query Window it works totally fine. However, when I attempt to create a view of the same query it gives following error. Msg 1033, Level 15, State 1, Procedure myView, Line 6 The ORDER BY clause is invalid in views, inline functions, derived tables, subqueries, and common table expressions, unless TOP, OFFSET or FOR XML is also specified. It is pretty clear to me now that the script which I have written seems to need TOP (100) PERCENT, so Query . Why do I need it? Is there any work around to this issue. I particularly find this question pretty interesting as it really touches the fundamentals of the T-SQL query writing. Please note that the query which is automatically changed is not in New Query Editor but opened from SSMS using following way. Database >> Views >> Right Click >> New View (see the image below) Answer: The answer to the above question can be very long but I will keep it simple and to the point. There are three things to discuss in above script 1) Reason for Error 2) Reason for Auto generates TOP (100) PERCENT and 3) Potential solutions to the above error. Let us quickly see them in detail. 1) Reason for Error The reason for error is already given in the error. ORDER BY is invalid in the views and a few other objects. One has to use TOP or other keywords along with it. The way semantics of the query works where optimizer only follows(honors) the ORDER BY in the same scope or the same SELECT/UPDATE/DELETE statement. There is a possibility that one can order after the scope of the view again the efforts spend to order view will be wasted. The final resultset of the query always follows the final ORDER BY or outer query’s order and due to the same reason optimizer follows the final order of the query and not of the views (as view will be used in another query for further processing e.g. in SELECT statement). Due to same reason ORDER BY is now allowed in the view. For further accuracy and clear guidance I suggest you read this blog post by Query Optimizer Team. They have explained it very clear manner the same subject. 2) Reason for Auto Generated TOP (100) PERCENT One of the most popular workaround to above error is to use TOP (100) PERCENT in the view. Now TOP (100) PERCENT allows user to use ORDER BY in the query and allows user to overcome above error which we discussed. This gives the impression to the user that they have resolved the error and successfully able to use ORDER BY in the View. Well, this is incorrect as well. The way this works is when TOP (100) PERCENT is used the result is not guaranteed as well it is ignored in our the query where the view is used. Here is the blog post on this subject: Interesting Observation – TOP 100 PERCENT and ORDER BY. Now when you create a new view in the SSMS and build a query with ORDER BY to avoid the error automatically it adds the TOP 100 PERCENT. Here is the connect item for the same issue. I am sure there will be more connect items as well but I could not find them. 3) Potential Solutions If you are reading this post from the beginning in that case, it is clear by now that ORDER BY should not be used in the View as it does not serve any purpose unless there is a specific need of it. If you are going to use TOP 100 PERCENT with ORDER BY there is absolutely no need of using ORDER BY rather avoid using it all together. Here is another blog post of mine which describes the same subject ORDER BY Does Not Work – Limitation of the Views Part 1. It is valid to use ORDER BY in a view if there is a clear business need of using TOP with any other percentage lower than 100 (for example TOP 10 PERCENT or TOP 50 PERCENT etc). In most of the cases ORDER BY is not needed in the view and it should be used in the most outer query for present result in desired order. User can remove TOP 100 PERCENT and ORDER BY from the view before using the view in any query or procedure. In the most outer query there should be ORDER BY as per the business need. I think this sums up the concept in a few words. This is a very long topic and not easy to illustrate in one single blog post. I welcome your comments and suggestions. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, SQL View, T SQL, Technology

  Read the article

• PHP form auto response

  - by Mark

  Hi, I am using the following php code which has been given to me, it works fine, apart from the auto response bit. I know its not a lot of code I just dont know how to do it or why it snot working. Any help would be appreciated. thanks in advance. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" /> <title> - Contact Us</title> <!-- css --> <link rel="stylesheet" type="text/css" href="css/reset.css" /> <link rel="stylesheet" type="text/css" href="css/styles.css" /> <link rel="stylesheet" type="text/css" href="css/colorbox.css" /> <!-- javascript libraries --> <?php require_once('includes/js.php'); ?> </head> <body> <?php //FIll out the settings below before using this script $your_email = "(email address)"; $website = "(website name)"; //BOTS TO BLOCK $bots = "/(Indy|Blaiz|Java|libwww-perl|Python|OutfoxBot|User-Agent|PycURL|AlphaServer|T8Abot|Syntryx|WinHttp|WebBandit|nicebot)/i"; //Check if known bot is visiting if (preg_match($bots, $_SERVER["HTTP_USER_AGENT"])) { exit ("Sorry bots are not allowed here!"); } //Known Exploits $exploits = "/(content-type|bcc:|cc:|from:|reply-to:|javascript|onclick|onload)/i"; //Spam words $spam_words = "/(viagra|poker|blackjack|porn|sex)/i"; // BAD WORDS $words = "/( bitch|dick|pussy|pussies|ass|fuck|cum|cumshot|cum shot| gangbang|gang bang|god dammit|goddammit|viagra|anus|analsex )/i"; //BAD WORD/SPAM WORD/EXPLOIT BLOCKER function wordBlock($word) { //Make variables global global $words; global $exploits; global $spam_words; if (preg_match($words, $word)) { $word = preg_replace($words, "#####", $word); } if(preg_match($exploits,$word)){ $word = preg_replace($exploits,"",$word); } if(preg_match($spam_words,$word)){ $word = preg_replace($spam_words,"$$$$",$word); } return $word; } //CLean data function function dataClean($data) { $data = stripslashes(trim(rawurldecode(strip_tags($data)))); return $data; } //CREATE MAIN VARIABLES $name = (isset ($_POST['name'])) ? dataClean($_POST['name']) : FALSE; $company = (isset ($_POST['company'])) ? dataClean($_POST['company']) : FALSE; $address = (isset ($_POST['address'])) ? dataClean($_POST['address']) : FALSE; $postcode = (isset ($_POST['postcode'])) ? dataClean($_POST['postcode']) : FALSE; $phone = (isset ($_POST['phone'])) ? dataClean($_POST['phone']) : FALSE; $email = (isset ($_POST['email'])) ? dataClean($_POST['email']) : FALSE; $comment = (isset ($_POST['message'])) ? wordBlock(dataClean($_POST['message'])) : FALSE; $submit = (isset ($_POST['send'])) ? TRUE : FALSE; $email_check = "/^[A-Z0-9._%+-]+@[A-Z0-9.-]+\.[A-Z]{2,6}$/i"; //$ip = $_SERVER["REMOTE_ADDR"]; $errors = array(); //Check if send button was clicked if ($submit) { if (!$name) { $errors[] = "Please enter a name!"; } if ($name) { if (!ereg("^[A-Za-z' -]*$", $name)) { $errors[] = "You may not use special characters in the name field!"; } } if (!$email) { $errors[] = "Please enter an email address!"; } if ($email) { if (!preg_match($email_check, $email)) { $errors[] = "The E-mail you entered is invalid!"; } } /* if (!$subject) { $errors[] = "Please enter an email subject!"; } */ if (!$comment) { $errors[] = "Please don't leave the message field blank!"; } //Check if any errors are present if (count($errors) > 0) { foreach ($errors AS $error) { print "&bull; $error <br />"; } } else { //MESSAGE TO SEND TO ADMIN //Create main headers $headers = "From: " . $website . " <$your_email> \n"; $headers .= "Reply-to:" . $email . " \n"; $headers .= "MIME-Version: 1.0\n"; $headers .= "Content-Transfer-Encoding: 8bit\n"; $headers .= "Content-Type: text/html; charset=UTF-8\n"; $message = ""; $message .= "<h1>New E-Mail From " . $website . "</h1><br /><br />"; $message .= "<b>Name:</b> " . $name . "<br />"; $message .= "<b>Company:</b> " . $company . "<br />"; $message .= "<b>Address:</b> " . $address . "<br />"; $message .= "<b>Postcode:</b > " . $postcode . "<br />"; $message .= "<b>Phone No:</b> " . $phone . "<br />"; $message .= "<b>E-mail:</b> " . $email . "<br />"; $message .= "<b>Message:</b> " . $comment . "<br />"; //E-mails subject $mail_subject = "Message from " . $website . ""; /* CHECK TO BE SURE FIRST E-MAIL TO ADMIN IS A SUCCESS AND SEND EMAIL TO ADMIN OTHERWISE DON'T SEND AUTO RESPONCE */ if (mail($your_email, $mail_subject, $message, $headers)) { //UNSET ALL VARIABLES unset ($name, $email, $company, $address, $postcode, $phone, $comment, $_REQUEST); //JAVASCRIPT SUCCESS MESSAGE echo " <script type='text/javascript' language='JavaScript'> alert('Your message has been sent'); </script> "; //SUCCESS MESSAGE TO SHOW IF JAVASCRIPT IS DISABLED echo "<noscript><p>THANK YOU YOUR MESSAGE HAS BEEN SENT</p></noscript>"; /* -----------------END MAIL BLOCK FOR SENDING TO ADMIN AND START AUTO RESPONCE SEND----------------- */ //AUTO RESPONCE MESSAGE //Create main headers $headers = "From: " . $website . " <$your_email> \n"; $headers .= "Reply-to:" . $your_email . " \n"; $headers .= "MIME-Version: 1.0\n"; $headers .= "Content-Transfer-Encoding: 8bit\n"; $headers .= "Content-Type: text/html; charset=UTF-8\n"; $message = ""; $message .= "<h1>Thank You For Contacting Us </h1><br /><br />"; $message .= "On behalf of <b>" . $website . "</b> we wanna thank you for contacting us and to let you know we will respond to your message as soon as possible thank you again."; //E-mails subject $mail_subject = "Thank you for contacting " . $website . ""; //Send the email mail($email, $mail_subject, $message, $headers); /* -----------------END MAIL BLOCK FOR SENDING AUTO RESPONCE ----------------- */ } else { echo " <script type='text/javascript' language='JavaScript'> alert('Sorry could not send your message'); </script> "; echo "<noscript><p style='color:red;'>SORRY COULD NOT SEND YOUR MESSAGE</p></noscript>"; } } } ?> <div id="wrapper"> <div id="grad_overlay"> <!-- Header --> <div id="header"> <a href="index.php" title="Regal Balustrades"><img src="images/regal_logo.png" alt="Regal Balustrades" /></a> <div id="strapline"> <img src="images/strapline.png" alt="Architectural metalwork systems" /> </div> </div> <!-- Navigation --> <div id="nav"> <?php require_once('includes/nav.php'); ?> </div> <!-- Content --> <div id="content"> <div id="details"> <p class="getintouch env">Get In Touch</p> <ul class="details"> <li>T. (0117) 935 3888</li> <li>F. (0117) 967 7333</li> <li>E. <a href="mailto:[email protected]" title="Contact via email">[email protected]</a></li> </ul> <p class="whereto hse">Where To Find Us</p> <ul class="details"> <li>Regal Balustrades</li> <li>Regal House, </li> <li>Honey Hill Road,</li> <li>Kingswood, </li> <li>Bristol BS15 4HG</li> </ul> </div> <div id="contact"> <h1>Contact us</h1> <p>Please use this form to request further information about Regal Balustrades and our services. To speak to a member of our staff in person, please call us on 0117 9353888</p> <div id="form"> <form method='POST' action='<?php echo "".$_SERVER['PHP_SELF'].""; ?>'> <p class='form-element'> <label for='name'>Name:</label> <input type='text' name='name' value='<?php echo "" . $_REQUEST['name'] . "";?>' /> </p> <p class='form-element'> <label for='company'>Company:</label> <input type='text' name='company' value='<?php echo "" . $_REQUEST['company'] . "";?>' /> </p> <p class='form-element'> <label for='address'>Address:</label> <textarea name='address' rows='5' id='address' class='address' ><?php echo "" . $_REQUEST['address'] . "";?></textarea> </p> <p class='form-element'> <label for='postcode'>Postcode:</label> <input type='text' name='postcode' value='<?php echo "" . $_REQUEST['postcode'] . "";?>' /> </p> <p class='form-element'> <label for='phone'>Telephone:</label> <input type='text' name='phone' value='<?php echo "" . $_REQUEST['phone'] . "";?>' /> </p> <p class='form-element'> <label for='email'>Email:</label> <input type='text' name='email' value='<?php echo "" . $_REQUEST['email'] . "";?>' /> </p> </div> <div id='form-right'> <p class='form-element'> <label for='message'>Enquiry:</label> <textarea name='message' class='enquiry' id='enquiry' rows='5' cols='40' ><?php echo "" . $_REQUEST['message'] . "";?></textarea> </p> <p class='form-element'> <input type='submit' class='submit' name='send' value='Send message' /> </p> </div> <p class='nb'><em>We will respond as soon as possible.</em></p> </form> </div> </div> </div> </div> </div> <!-- Footer --> <div id="footer-container"> <?php require_once('includes/footer.php'); ?> </div> <!-- js functions --> <script> $(document).ready(function() { $("ul#navig li:nth-child(6)").addClass("navon"); }); </script> </body> </html>

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Hard Disk DRDY error: is it a crash

  - by pranjal

  I am using IBM Thinkpad, 1.7GHz, 512 RAM with Linux Mint 9 installed. I have two partitions in addition to root. One of the partitions became read-only yesterday, after which I rebooted my system. It is extremely slow along with DRDY Error : Is my Hard disk crashed ? Error Log while booting. Differences between boot sector and its backup. failed command : READ DMA BMDMA : stat 0X25 ata 1.00 : status : { DRDY ERR } ata 1.00 : status :{ UNC } Buffer I/O error on logical device, logical block 65467 smartctl output for the partition: mint mint # smartctl -a /dev/sda1 smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: TOSHIBA MK4026GAX RoHS Serial Number: X5LY1623T Firmware Version: PA107E User Capacity: 40,007,761,920 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 6 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Feb 17 06:48:25 2011 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 153) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 30) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 310 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 3968 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 40 7 Seek_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 8 Seek_Time_Performance 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0032 082 082 000 Old_age Always - 7257 10 Spin_Retry_Count 0x0033 179 100 030 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3484 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 489 193 Load_Cycle_Count 0x0032 064 064 000 Old_age Always - 367150 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 36 (Lifetime Min/Max 14/57) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 33 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 82 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 1 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0 220 Disk_Shift 0x0002 100 100 000 Old_age Always - 101 222 Loaded_Hours 0x0032 085 085 000 Old_age Always - 6146 223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 0 224 Load_Friction 0x0022 100 100 000 Old_age Always - 0 226 Load-in_Time 0x0026 100 100 000 Old_age Always - 227 240 Head_Flying_Hours 0x0001 100 100 001 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 2371 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 2371 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:10.061 READ DMA f8 00 00 00 00 00 e0 00 00:03:10.061 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:10.053 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:10.053 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:10.053 READ NATIVE MAX ADDRESS Error 2370 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:03:03.328 READ DMA f8 00 00 00 00 00 e0 00 00:03:03.327 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:03:03.320 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:03:03.319 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:03:03.319 READ NATIVE MAX ADDRESS Error 2369 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:56.582 READ DMA f8 00 00 00 00 00 e0 00 00:02:56.582 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:56.574 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:56.574 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:56.574 READ NATIVE MAX ADDRESS Error 2368 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:49.809 READ DMA f8 00 00 00 00 00 e0 00 00:02:49.809 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:49.801 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:49.801 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:49.801 READ NATIVE MAX ADDRESS Error 2367 occurred at disk power-on lifetime: 7256 hours (302 days + 8 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 05 1a 1b 00 e0 Error: UNC 5 sectors at LBA = 0x00001b1a = 6938 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 05 1a 1b 00 e0 00 00:02:43.056 READ DMA f8 00 00 00 00 00 e0 00 00:02:43.056 READ NATIVE MAX ADDRESS ec 00 00 00 00 00 a0 02 00:02:43.048 IDENTIFY DEVICE ef 03 45 00 00 00 a0 02 00:02:43.048 SET FEATURES [Set transfer mode] f8 00 00 00 00 00 e0 00 00:02:43.047 READ NATIVE MAX ADDRESS SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Device does not support Selective Self Tests/Logging Do I need to get a new Hard Disk my PC ?

  Read the article

• How to run a DHCP service on Windows 7 Home

  - by Joshua Lim

  I'm trying to setup a DHCP server on Windows 7 Home, tried using a couple of freeware which I found on the Internet but none seemed to work. What I did: On the Windows 7 machine which I install the DHCP Server with the range 192.168.1.12-192.168.1.256. I set the Gigabit Ethernet adapter to a static IP address of 192.168.1.11 and subnet mask of 255.255.255.0. When I did an IP config, it showed. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 8C-73-6E-75-A7-56 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::196d:b6bb:8f93:2555%12(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.1.11(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled I connected another Window 7 machine to the "DHCP server" using a cross cable and set network adapter on that machine to automatically detect IP address. The client fails to acquire the correct IP address from the DHCP server and showed the autoconfigured IPv4 address instead. Here's the information returned by config /all on the client machine. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Atheros AR8152/8158 PCI-E Fast Ethernet Controller (NDIS 6.20) Physical Address. . . . . . . . . : 54-04-A6-40-96-4B DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::4885:4082:5572:5a85%12(Preferred) Autoconfiguration IPv4 Address. . : 169.254.90.133(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : DHCPv6 IAID . . . . . . . . . . . : 341050534 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-54-78-12-00-08-CA-46-4C-5A DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1 fec0:0:0:ffff::2%1 fec0:0:0:ffff::3%1 NetBIOS over Tcpip. . . . . . . . : Enabled DHCP client are running on both machines. I've tried many times but failed. Googling also returned no useful information for my scenario. Have I missed out any step? Thanks.

  Read the article

• Zend Form problem:Setting decorators for textarea and textinput length values

  - by davykiash

  In my Zend form code I have the following $address = new Zend_Form_Element_Textarea('accounts_address'); $address->setLabel('Address') ->setAttrib('rows','4') ->setAttrib('cols','4') ->addFilter('StripTags') ->addFilter('StringTrim') ->addValidator('NotEmpty'); $address->setDecorators(array( 'ViewHelper', 'Description', 'Errors', array(array('data'=>'HtmlTag'), array('tag' => 'td')), array('Label', array('tag' => 'td')), array(array('row'=>'HtmlTag'),array('tag'=>'tr')) )); However in my output I do get the attributes set but the text area seems to remain the same size Output <tr><td id="accounts_address-label"><label for="accounts_address" class="optional">Address</label></td> <td> <textarea name="accounts_address" id="accounts_address" rows="4" cols="4"></textarea></td></tr> What am I missing?

  Read the article

• JQuery text display problem?

  - by SLAPme

  Kind of new to JQuery and I was wondering how can I state that the users submitted info was saved when they click the submit button by displaying the message Changes saved at the top of the form and then have it disappear when the user leaves the web page and return back to it? Right now my code only displays that changes were saved at the bottom of the form outside of the lists and will not disappear when the users leave the web page and return back to it. Here is the JQuery code. $(function() { $(".save-button").click(function() { $.post($("#contact-form").attr("action"), $("#contact-form").serialize(), function(html) { $("div.contact-info-form").html(html); $('#contact-form').append('<li>Changes saved!</li>'); }); return false; // prevent normal submit }); }); Here is the html code. <div id="contact-info-form" class="form-content"> <h2>Contact Information</h2> <form method="post" action="index.php" id="contact-form"> <fieldset> <ul> <li><label for="address">Address 1: </label><input type="text" name="address" id="address" size="25" class="input-size" value="<?php if (isset($_POST['address'])) { echo $_POST['address']; } else if(!empty($address)) { echo $address; } ?>" /></li> <li><label for="address_two">Address 2: </label><input type="text" name="address_two" id="address_two" size="25" class="input-size" value="<?php if (isset($_POST['address_two'])) { echo $_POST['address_two']; } else if(!empty($address_two)) { echo $address_two; } ?>" /></li> <li><label for="city_town">City/Town: </label><input type="text" name="city_town" id="city_town" size="25" class="input-size" value="<?php if (isset($_POST['city_town'])) { echo $_POST['city_town']; } else if(!empty($city_town)) { echo $city_town; } ?>" /></li> <li><label for="state_province">State/Province: </label> <?php echo '<select name="state_province" id="state_province">' . "\n"; foreach($state_options as $option) { if ($option == $state_province) { echo '<option value="' . $option . '" selected="selected">' . $option . '</option>' . "\n"; } else { echo '<option value="'. $option . '">' . $option . '</option>'."\n"; } } echo '</select>'; ?> </li> <li><label for="zipcode">Zip/Post Code: </label><input type="text" name="zipcode" id="zipcode" size="5" class="input-size" value="<?php if (isset($_POST['zipcode'])) { echo $_POST['zipcode']; } else if(!empty($zipcode)) { echo $zipcode; } ?>" /></li> <li><label for="country">Country: </label> <?php echo '<select name="country" id="country">' . "\n"; foreach($countries as $option) { if ($option == $country) { echo '<option value="' . $option . '" selected="selected">' . $option . '</option>' . "\n"; } else if($option == "-------------") { echo '<option value="' . $option . '" disabled="disabled">' . $option . '</option>'; } else { echo '<option value="'. $option . '">' . $option . '</option>'."\n"; } } echo '</select>'; ?> </li> <li><label for="email">Email Address: </label><input type="text" name="email" id="email" size="25" class="input-size" value="<?php if (isset($_POST['email'])) { echo $_POST['email']; } else if(!empty($email)) { echo $email; } ?>" /><br /><span>We don't spam or share your email with third parties. We respect your privacy.</span></li> <li><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="hidden" name="contact_info_submitted" value="true" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form> </div>

  Read the article

• JQuery form submit Question?

  - by SLAPme

  I'm kind of new to JQuery and was wondering how can I have the following text appear when the user submits there changes <p>Your changes have been saved.</p>? How do I fix my code so it displays this message? JQuery script. $(function() { $(".save-button").click(function() { $.post($("#contact-form").attr("action"), $("#contact-form").serialize(), function(html) { $("div.contact-info-form").html(html); }); return false; // prevent normal submit }); }); Here is the html. <div id="contact-info-form" class="form-content"> <h2>Contact Information</h2> <form method="post" action="index.php" id="contact-form"> <fieldset> <ul> <li><label for="address">Address 1: </label><input type="text" name="address" id="address" size="25" class="input-size" value="<?php if (isset($_POST['address'])) { echo $_POST['address']; } else if(!empty($address)) { echo $address; } ?>" /></li> <li><label for="address_two">Address 2: </label><input type="text" name="address_two" id="address_two" size="25" class="input-size" value="<?php if (isset($_POST['address_two'])) { echo $_POST['address_two']; } else if(!empty($address_two)) { echo $address_two; } ?>" /></li> <li><label for="city_town">City/Town: </label><input type="text" name="city_town" id="city_town" size="25" class="input-size" value="<?php if (isset($_POST['city_town'])) { echo $_POST['city_town']; } else if(!empty($city_town)) { echo $city_town; } ?>" /></li> <li><label for="state_province">State/Province: </label> <?php echo '<select name="state_province" id="state_province">' . "\n"; foreach($state_options as $option) { if ($option == $state_province) { echo '<option value="' . $option . '" selected="selected">' . $option . '</option>' . "\n"; } else { echo '<option value="'. $option . '">' . $option . '</option>'."\n"; } } echo '</select>'; ?> </li> <li><label for="zipcode">Zip/Post Code: </label><input type="text" name="zipcode" id="zipcode" size="5" class="input-size" value="<?php if (isset($_POST['zipcode'])) { echo $_POST['zipcode']; } else if(!empty($zipcode)) { echo $zipcode; } ?>" /></li> <li><label for="country">Country: </label> <?php echo '<select name="country" id="country">' . "\n"; foreach($countries as $option) { if ($option == $country) { echo '<option value="' . $option . '" selected="selected">' . $option . '</option>' . "\n"; } else if($option == "-------------") { echo '<option value="' . $option . '" disabled="disabled">' . $option . '</option>'; } else { echo '<option value="'. $option . '">' . $option . '</option>'."\n"; } } echo '</select>'; ?> </li> <li><label for="email">Email Address: </label><input type="text" name="email" id="email" size="25" class="input-size" value="<?php if (isset($_POST['email'])) { echo $_POST['email']; } else if(!empty($email)) { echo $email; } ?>" /><br /><span>We don't spam or share your email with third parties. We respect your privacy.</span></li> <li><p>Changes have been saved</p><input type="submit" name="submit" value="Save Changes" class="save-button" /> <input type="hidden" name="contact_info_submitted" value="true" /> <input type="submit" name="submit" value="Preview Changes" class="preview-changes-button" /></li> </ul> </fieldset> </form> </div>

  Read the article

• PHP JSON encode output number as string

  - by mitch

  I am trying to output a JSON string using PHP and MySQL but the latitude and longitude is outputting as a string with quotes around the values. This causes an issue when I am trying to add the markers to a google map. Here is my code: $sql = mysql_query('SELECT * FROM markers WHERE address !=""'); $results = array(); while($row = mysql_fetch_array($sql)) { $results[] = array( 'latitude' =>$row['lat'], 'longitude' => $row['lng'], 'address' => $row['address'], 'project_ID' => $row['project_ID'], 'marker_id' => $row['marker_id'] ); } $json = json_encode($results); echo "{\"markers\":"; echo $json; echo "}"; Here is the expected output: {"markers":[{"latitude":0.000000,"longitude":0.000000,"address":"2234 2nd Ave, Seattle, WA","project_ID":"7","marker_id":"21"}]} Here is the output that I am getting: {"markers":[{"latitude":"0.000000","longitude":"0.000000","address":"2234 2nd Ave, Seattle, WA","project_ID":"7","marker_id":"21"}]} Notice the quotes around the latitude and longitude values.

  Read the article

• C++ Win32 Unhandled Exception Handler

  - by uray

  currently I used SetUnhandledExceptionFilter() to provide callback to get information when an unhandled exception was occurred, that callback will provides me with EXCEPTION_RECORD which provides ExceptionAddress. [1]what is actually ExceptionAddress is? does it the address of function / code that gives exception, or the memory address that some function tried to access? [2]is there any better mechanism that could give me better information when unhandled exception occured? (I can't use debug mode or add any code that affect runtime performance, since crash is rare and only on release build when code run as fast as possible) [3]is there any way for me to get several callstack address when unhandled exception occured. [4]suppose ExceptionAddress has address A, and I have DLL X loaded and executed at base address A-x, and some other DLL Y at A+y, is it good to assume that crash was PROBABLY caused by code on DLL X?

  Read the article

• Easy Made Easier

  - by dragonfly

      How easy is it to deploy a 2 node, fully redundant Oracle RAC cluster? Not very. Unless you use an Oracle Database Appliance. The focus of this member of Oracle's Engineered Systems family is to simplify the configuration, management and maintenance throughout the life of the system, while offering pay-as-you-grow scaling. Getting a 2-node RAC cluster up and running in under 2 hours has been made possible by the Oracle Database Appliance. Don't take my word for it, just check out these blog posts from partners and end users. The Oracle Database Appliance Experience - Zip Zoom Zoom http://www.fuadarshad.com/2012/02/oracle-database-appliance-experience.html Off-the-shelf Oracle database servers http://normanweaver.wordpress.com/2011/10/10/off-the-shelf-oracle-database-servers/ Oracle Database Appliance – Deployment Steps http://marcel.vandewaters.nl/oracle/database-appliance/oracle-database-appliance-deployment-steps     See how easy it is to deploy an Oracle Database Appliance for high availability with RAC? Now for the meat of this post, which is the first in a series of posts describing tips for making the deployment of an ODA even easier. The key to the easy deployment of an Oracle Database Appliance is the Appliance Manager software, which does the actual software deployment and configuration, based on best practices. But in order for it to do that, it needs some basic information first, including system name, IP addresses, etc. That's where the Appliance Manager GUI comes in to play, taking a wizard approach to specifying the information needed.     Using the Appliance Manager GUI is pretty straight forward, stepping through several screens of information to enter data in typical wizard style. Like most configuration tasks, it helps to gather the required information before hand. But before you rush out to a committee meeting on what to use for host names, and rely on whatever IP addresses might be hanging around, make sure you are familiar with some of the auto-fill defaults for the Appliance Manager. I'll step through the key screens below to highlight the results of the auto-fill capability of the Appliance Manager GUI.     Depending on which of the 2 Configuration Types (Config Type screen) you choose, you will get a slightly different set of screens. The Typical configuration assumes certain default configuration choices and has the fewest screens, where as the Custom configuration gives you the most flexibility in what you configure from the start. In the examples below, I have used the Custom config type.     One of the first items you are asked for is the System Name (System Info screen). This is used to identify the system, but also as the base for the default hostnames on following screens. In this screen shot, the System Name is "oda".     When you get to the next screen (Generic Network screen), you enter your domain name, DNS IP address(es), and NTP IP address(es). Next up is the Public Network screen, seen below, where you will see the host name fields are automatically filled in with default host names based on the System Name, in this case "oda". The System Name is also the basis for default host names for the extra ethernet ports available for configuration as part of a Custom configuration, as seen in the 2nd screen shot below (Other Network). There is no requirement to use these host names, as you can easily edit any of the host names. This does make filling in the configuration details easier and less prone to "fat fingers" if you are OK with these host names. Here is a full list of the automatically filled in host names. 1 2 1-vip 2-vip -scan 1-ilom 2-ilom 1-net1 2-net1 1-net2 2-net2 1-net3 2-net3     Another auto-fill feature of the Appliance Manager GUI follows a common practice of deploying IP Addresses for a RAC cluster in sequential order. In the screen shot below, I entered the first IP address (Node1-IP), then hit Tab to move to the next field. As a result, the next 5 IP address fields were automatically filled in with the next 5 IP addresses sequentially from the first one I entered. As with the host names, these are not required, and can be changed to whatever your IP address values are. One note of caution though, if the first IP Address field (Node1-IP) is filled out and you click in that field and back out, the following 5 IP addresses will be set to the sequential default. If you don't use the sequential IP addresses, pay attention to where you click that mouse. :-)     In the screen shot below, by entering the netmask value in the Netmask field, in this case 255.255.255.0, the gateway value was auto-filled into the Gateway field, based on the IP addresses and netmask previously entered. As always, you can change this value.     My last 2 screen shots illustrate that the same sequential IP address autofill and netmask to gateway autofill works when entering the IP configuration details for the Integrated Lights Out Manager (ILOM) for both nodes. The time these auto-fill capabilities save in entering data is nice, but from my perspective not as important as the opportunity to avoid data entry errors. In my next post in this series, I will touch on the benefit of using the network validation capability of the Appliance Manager GUI prior to deploying an Oracle Database Appliance.

  Read the article

• Access Violation

  - by Justin

  I've been learning how to NOP functions in C++ or even C but there are very few tutorials online about it. I've been googling for the past few hours now and I'm just stuck. Here is my code. #include <iostream> #include <windows.h> #include <tlhelp32.h> using namespace std; //#define NOP 0x90 byte NOP[] = {0x90}; void enableDebugPrivileges() { HANDLE hcurrent=GetCurrentProcess(); HANDLE hToken; BOOL bret=OpenProcessToken(hcurrent,40,&hToken); LUID luid; bret=LookupPrivilegeValue(NULL,"SeDebugPrivilege",&luid); TOKEN_PRIVILEGES NewState,PreviousState; DWORD ReturnLength; NewState.PrivilegeCount =1; NewState.Privileges[0].Luid =luid; NewState.Privileges[0].Attributes=2; AdjustTokenPrivileges(hToken,FALSE,&NewState,28,&PreviousState,&ReturnLength); } DWORD GetProcId(char* ProcName) { PROCESSENTRY32 pe32; HANDLE hSnapshot = NULL; pe32.dwSize = sizeof( PROCESSENTRY32 ); hSnapshot = CreateToolhelp32Snapshot( TH32CS_SNAPPROCESS, 0 ); if( Process32First( hSnapshot, &pe32 ) ) { do{ if( strcmp( pe32.szExeFile, ProcName ) == 0 ) break; }while( Process32Next( hSnapshot, &pe32 ) ); } if( hSnapshot != INVALID_HANDLE_VALUE ) CloseHandle( hSnapshot ); return pe32.th32ProcessID; } void WriteMem(DWORD Address, void* Value, size_t Size) { DWORD Protect = NULL; VirtualProtect((LPVOID)Address, 3, PAGE_READWRITE, &Protect); memcpy((void*)Address, Value, 3); VirtualProtect((LPVOID)Address, 3, Protect, &Protect); } void nop_(PVOID address, int bytes){ DWORD d, ds; VirtualProtect(address, bytes, PAGE_EXECUTE_READWRITE, &d); memset(address, 144, bytes); VirtualProtect(address,bytes,d,&ds); } void MemCopy(HANDLE pHandle, void* Dest, const void* Src, int Len) { DWORD OldProtect; DWORD OldProtect2; VirtualProtect(Dest, Len, PAGE_EXECUTE_READWRITE, &OldProtect); memcpy(Dest, Src, Len); VirtualProtect(Dest, Len, OldProtect, &OldProtect2); FlushInstructionCache(pHandle, Dest, Len); } int main() { enableDebugPrivileges(); DWORD pid; HANDLE phandle; // Obtain the process ID pid = GetProcId("gr.exe"); if(GetLastError()) { cout << "Error_PID_: " << GetLastError() << endl; system("pause"); return -1; } // Obtain the process handle phandle = OpenProcess(PROCESS_ALL_ACCESS,0,pid); if(GetLastError()) { cout << "Error_HANDLE_: " << GetLastError() << endl; system("pause"); return -1; } // Debug info, 0 = bad cout <<"pid : " << pid << endl; cout <<"HANDLE: " << phandle << endl << endl; system("pause"); // Change value to short iValue = -1; int choice = 0; BYTE * bGodMode = (BYTE *) (0x409A7E); // Lives Address bool hack = true; while(hack) { system("cls"); cout << "What hack?\n0. Exit\n1. Lives\n\n!> "; cin >> choice; switch(choice) { case 0: { hack=false; break; } case 1: // Modify Time cout << "God Mode On\n!> "; // cin >> iValue; // nop_((PVOID)(0x409A7E), 3); // MemCopy(phandle, (PVOID)0x409A7E, &NOP, 1); WriteMem((DWORD)(0x00409A7E), (void*)NOP, sizeof NOP); if(GetLastError()) { cout << "Error: " << GetLastError() << endl; system("pause"); } break; default: cout << "ERROR!\n"; break; } Sleep(100); } system("pause"); return 0; } This is suppose to NOP the DEC function that is 3 bytes long preventing me from losing lives. However each time I try it, it crashes the hack and says I had a access violation. I tried to look up the reasons and most of them dealt with with the size of the location I'm writing to and what I'm copying from. Otherwise, I have absolutely no idea. Any help would be nice. The game is GunRoar and the base address "0x409A7E" is where the DEC function is.

  Read the article

• How do I query/filter a to-many relationship in Core Data

  - by Kris Bixler

  I have Customer, Event and Address objects in my data model. Both Customer and Address have a one-to-many relationship to Event. I can get the distinct list of addresses for a customer's events for by doing this: NSSet *addressSet = [customer valueForKeyPath:@"events.address"]; For the part of the UI I'm working on now, I need to display the address from the most recent event prior to now that has an address. I'm starting to go down the path of creating a NSFetchRequest, setting it's entity, sort descriptors, predicate and then looping through the results, but it seems like a lot of code. Am I missing some obvious way of filtering/sorting on the "events" relationship of the Customer object or is creating the NSFetchRequest the best solution?

  Read the article

• How to handle customers with multiple addresses in CakePHP

  - by Ryan

  I'm putting together a system to track customer orders. Each order will have three addresses; a Main contact address, a billing address and a shipping address. I do not want to have columns in my orders table for the three addresses, I'd like to reference them from a separate table and have some way to enumerate the entry so I can determine if the addressing is main, shipping or billing. Does it make sense to create a column in the address table for AddressType and enumerate that or create another table - AddressTypes - that defines the address enumeration and link to that table? I have found other questions that touch on this topic and that is where I've taken my model. The problem I'm having is taking that into the cakePHP convention. I've been struggling to internalize the direction OneToMany relationships are formed - the way the documentation states feels backwards to me. Any help would be appreciated, Thanks!

  Read the article

• link div to input text in firefox

  - by golf_nut

  I'm using google maps api to have a map show up on my website where visitors can also find directions. I have a starting point setup and an end point. Both are text areas. The start is empty, but I want the end point to be populated with the address from a div that I already have in the page. I have the javascript as: var address = document.getElementById("address").innerText.replace(/\n/g, " "); It works in Chrome, but Firefox shows the text in the endpoint box as 'undefined.' And Firebug is giving me - document.getElementById("address").innerText is undefined [Break On This Error] var address = document.getElementB...ress").innerText.replace(/\n/g, " "); Any help is appreciated. Thanks

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >