Search Results

Search found 52807 results on 2113 pages for 'system tables'.

Page 98/2113 | < Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >

• Black Screen and System Hang - Possibly CPU overheating

  - by Mahesh

  I have this old computer - P4 2.0ghz, 1.2GB RAM and onboard graphics(no external card), 80GBHDD. It has xubuntu installed on it and it regularly hangs when it takes more system resources for say like graphical programs, too many tabs on firefox etc. It just either hangs the system or shows black screen. Tested if it was issue of HD but it wasn't because i have used linux livecd and problem is still the same even if I have removed the HD. I have also tested with USB linux (puppy linux and ubuntu linux on 8gb drives). Tested windows XP as well on this HD and results are the same. Tested another HD on this machine, results are still the same with it. System hangs or goes black screen and requires restart. I thought later it could be thermal heat issue and then applied thermal paste on heatsink but still it fails to work for me. It continues to show symptoms. Another thing which was yet to be tested is changing of CPU fan which was not done because I have not found any fan for old pentium 4 machine in the market. I have to hit online stores (but i am in india and it's hard to find it in online shops which can deliver it to me). So far I don't see this as HD or Monitor or OS issue because I have tested with other HD and results are the same. So it could be either CPU fan or motherboard? What could be possible issue with the hardware?

  Read the article

• Adding network share as the system account breaks Win7 backup to network

  - by ChrisBenn

  (On Win7 Ultimate x64 SP1) So I've been using Win7 backup to \192.168.0.100\Backup\main-desktop\ for awhile without issue. Yesterday I tried to setup crashplan to synchronize my dropbox folder and a network share. I then found out that crashplan, as it runs under the system account, can't see my user mapped drives. So I created a startup script net use O: \192.168.0.100\Documents /USER:192.168.0.100\username password and set it to run, on startup, after the network interface is up, as the system account. (the username & password are the same for the net use script above, the locally logged in user, and the explicit username/password entered in windows backup). I woke up this morning to find error flags from the windows backup and get "Network location cannot be used" (0x800704B3). If I disable the startup task & reboot then windows backup works fine. I'm not sure why having a mapped drive for another user is killing windows backup (same server, different folder). I can work around the issue by using another program to synchronize the two folders, but I'm completely in the dark as to why this happens (and it's 100% repeatable). Uninstalling the crashplan client doesn't change anything - it's the net use run under the system account that breaks win7 backup (to a network location).

  Read the article

• btrfs: can i create a btrfs file system with data as jbod and metadata mirrored

  - by Yogi

  I am trying to build a home server that will be my NAS/Media server as well a the XBMC front end. I am planning on using Ubuntu with btrfs for the NAS part of it. The current setup consists of 1TB hdd for the OS etc and two 2TB hdd's for data. I plan to have the 2TB hdd's used as JBOD btrfs system in which i can add hdd's as needed later, basically growing the filesystem online. They way I had setup the file system for testing was while installing the OS just have one of the HDD's connected and have btrfs on it mounted as /data. Later on add another hdd to this file system. When the second disk was added btrfs made as RAID 0, with metadata being RAID 1. However, this presents a problem: even if one of the disk fails I loose all my data (mostly media). Also most of the time the server will be running without doing any disk access, i.e. the HDD's can be spun down, when a access request comes in this with the current RAID 0 setup both disks will spin up. in case I manage a JBOD only the disk that has the file needs to be spun up. This should hopefully reduce the MTBF for each disk. So, is there a way in which I can have btrfs setup such that metadata is mirrored but data stays in a JBOD formation? Another question I have is this, I understand that a full drive failure in JBOD will lose data on the drive, but having metadeta mirrored across all drives, will this help the filesytem correct errors that migh creep in (ex bit rot?) and is btrfs capable of doing this.

  Read the article

• Synchronization of volume snapshots when doing whole system backups

  - by intuited

  Is there a way to guarantee consistency across volumes when doing backups from LVM snapshots? Consider this scenario: Some system upgrade is in progress. It will write some files to the /usr volume, and once completed, will record success in the /var volume. As the upgrade is just about complete, I run a backup script that creates snapshots of the /usr and /var volumes, along with the rest of the system's volumes, and proceeds to create backups from those snapshots. Just before the upgrade's last write/flush on the /usr volume completes, the backup script takes its snapshot of /usr. That write completes, and the upgrade operation's success is quickly recorded in the nebulous depths of /var. The backup script takes a snapshot of /var. The backup script creates backups from the snapshots it has, er, snapshotted. So the result of all of this tomfoolery is that the resulting /usr backup contains a file which is missing a few bits, and the /var backup contains metadata indicating that that file is complete and approved for use. Without delving into the details of which operating systems' system upgrade systems would be unfazed by such trifles, is there a way to avoid such problems? At the least this seems like it could cause some application to fail unexpectedly after restoration of such a backup.

  Read the article

• Using npm install as a MS-Windows system account

  - by Guss

  I have a node application running on Windows, which I want to be able to update automatically. When I run npm install -d as the Administrator account - it works fine, but when I try to run it through my automation software (that is running as local system), I get errors when I try to install a private module from a private git repository: npm ERR! git clone [email protected]:team/repository.git fatal: Could not change back to 'C:/Windows/system32/config/systemprofile/AppData/Roaming/npm-cache/_git-remotes/git-bitbucket-org-team-repository-git-06356f5b': No such file or directory npm ERR! Error: Command failed: fatal: Could not change back to 'C:/Windows/system32/config/systemprofile/AppData/Roaming/npm-cache/_git-remotes/git-bitbucket-org-team-repository-git-06356f5b': No such file or directory npm ERR! npm ERR! at ChildProcess.exithandler (child_process.js:637:15) npm ERR! at ChildProcess.EventEmitter.emit (events.js:98:17) npm ERR! at maybeClose (child_process.js:735:16) npm ERR! at Socket.<anonymous> (child_process.js:948:11) npm ERR! at Socket.EventEmitter.emit (events.js:95:17) npm ERR! at Pipe.close (net.js:451:12) npm ERR! If you need help, you may report this log at: npm ERR! <http://github.com/isaacs/npm/issues> npm ERR! or email it to: npm ERR! <[email protected]> npm ERR! System Windows_NT 6.1.7601 npm ERR! command "C:\\Program Files\\nodejs\\\\node.exe" "C:\\Program Files\\nodejs\\node_modules\\npm\\bin\\npm-cli.js" "install" "-d" npm ERR! cwd D:\nodeapp npm ERR! node -v v0.10.8 npm ERR! npm -v 1.2.23 npm ERR! code 128 Just running git clone using the same system works fine. Any ideas?

  Read the article

• During Vista Repair - No operating system is listed.

  - by Jack Marchetti

  After a Windows update, my brother's Gateway computer loads to the "Step 3 of 3: 0%" and reboots. Safe Mode does not work. I placed a Vista DVD in the drive, and re-booted. (Note, this is my Vista DVD, not the Recovery/System disc that would come with a computer. Gateway does not give you CD's anymore. I believe they store recovery on a partition, but that partition has been wiped out). I chose "Repair Your Computer" I get a dialog box, but no operating system is listed. I'm then prompted to "Load Drivers". What drivers am I supposed to be loading here and where from? I placed a CD in the drive to "load drivers" but I don't see my DVD drive listed. All I saw where X:/Sources along with several Removable Media slots that were empty. On another screen I tried Startup Repair, which didn't do anything. I attempted to use System Restore - but it doesn't detect the hard drive. I'm guessing that I'm missing some sort of SATA driver and that is why the hard disk is not being found. Any ideas on this?

  Read the article

• Best way to execute a command after Linux system halt

  - by Lukas Loesche

  Problem: The SSDs in our servers require a power cycle (i.e. off/on, not reset/warm reboot) after a firmware update. Thoughts: Using 'ipmitool chassis power cycle' I can cycle the server's power. However this would cut the power while the system is still running, filesystems are mounted, etc. What I basically want is a delayed power cycle so the system has a change to halt. But I guess that would have to be implemented on the server's IPMI board, so it's not really an option. My initial idea was to dynamically create a ramdisk containing the tool and libs and somehow integrate that into the halt process. I saw there's a /etc/init.d/halt, so that would be my starting point. Although I believe the kernel at some point in the shutdown process starts to kill off remaining processes. So I'm not even sure if that's a viable way. Question: What would be the best way to execute ipmitool (or any other command), after the system has halted and all regular filesystems are unmounted?

  Read the article

• How to change my W2k8 System Partition?

  - by Chris May

  On my Windows 2008 server, my C: is 1.5 TB, and the partition is marked as: Healthy (Boot, Page File, Active, Crash Dump, Primary Partition) and somehow I ended up with a 2GB D: that is marked as Healthy (System). On this D: drive are only a few MB worth of files (bootmgr, boot folder, bootsect.bak), but all Windows files are on the c:. I've done everything I can to remove the (System) mark. I tried using bcdedit, I tried marking the C:partition as "Active", I tried using bootsect.exe to assign the C: drive as the boot partition. Maybe I didn't do one of those steps correct, but I've tried everything I can. When I got my new Dell Poweredge T710, I didn't bother removing their 2 small drives before I put in my 2 new large drives. So I think when I installed W2k8 Server, maybe dell left some bootable partition on their drives to help me install the OS, but I never used it and just booted right from the install CD. Can anyone help me remove the (System) mark from the D: so I can remove the D: partition and still boot to the C:? I know I could remove the D: drives and reinstall windows, but I'm trying to avoid a total reinstall.

  Read the article

• Notebook Operating System with extreme support cycles/security updates

  - by leto

  Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

  Read the article

• Determining the Source of a Given File System Mount on Unix [migrated]

  - by phobos51594

  Background Recently I have run into a bit of a snag on my home FreeBSD server. I recently upgraded it to the latest stable release, and I have noticed some strange behavior with the /var partition. Originally, I had the system configured such that /var had its own partition with /var/run and /var/log in memory disks (/tmp, too). After the upgrade, I notice there is a new, fourth memory disk mounting directly to /var that I had not set up manually and is not in my fstab. It is only 28 megs or so in size and is causing problems when trying to update my ports collection. The ramdisk mounts atuomagically at boot and cannot be unmounted while in multi-user mode. If I drop to single user mode, I am able to unmount it without issue, however rebooting causes it to pop right back up. System specifications have been included at the end of the post. Question Is there any way to determine exactly what is mounting a given memory disk (or any filesystem, for that matter) after it has been mounted? Alternately, does anybody have any ideas what might have caused the new /var ramdisk to pop up? System Specification # uname -a FreeBSD sarge 9.1-PRERELEASE FreeBSD 9.1-PRERELEASE #0: Thu Nov 22 14:02:13 PST 2012 donut@sarge:/usr/obj/usr/src/sys/GENERIC i386 # df Filesystem 1K-blocks Used Avail Capacity Mounted on /dev/da0s1a 515612 410728 63636 87% / devfs 1 1 0 100% /dev /dev/da0s1d 515612 287616 186748 61% /var /dev/da0s1e 6667808 2292824 3841560 37% /usr /dev/md0 63004 32 57932 0% /tmp /dev/md1 3484 8 3200 0% /var/run /dev/md2 31260 8 28752 0% /var/log /dev/md3 31260 512 28248 2% /var <-- This # cat /etc/fstab # Device Mountpoint FStype Options Dump Pass# /dev/da0s1a / ufs rw,noatime 1 1 /dev/da0s1d /var ufs rw,noatime 2 2 /dev/da0s1e /usr ufs rw,noatime 2 2 md /tmp mfs rw,-s64M,noatime 0 0 md /var/run mfs rw,-s4M,noatime 0 0 md /var/log mfs rw,-s32M,noatime 0 0 Thank you in advance for any assistance.

  Read the article

• Gathering buslogic SCSI hardware and virtual machine operating system

  - by Julian

  I'm trying to use Powershell to get SCSI hardware from several virtual servers and get the operating system of each specific server. I've managed to get the specific SCSI hardware that I want to find with my code, however I'm unable to figure out how to properly get the operating system of each of the servers. Also, I'm trying to send all the data that I find into a csv log file, however I'm unsure of how you can make a powershell script create multiple columns. Here is my code (almost works but something's wrong): $log = "C:\Users\me\Documents\Scripts\ScsiLog.csv" Get-VM | Foreach-Object { $vm = $_ Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } | Foreach-Object { get-VMGuest -VM $vm } | Foreach-Object{ Write-output $vm.Guest.VmName >> $log } } I don't receive any errors when I run this code however whenever I run it I'm only getting the name of the servers and not the OS. Also I'm not sure what I need to do to make the OS appear in a different column from the name of the server in the csv log that I'm creating. What do I need to change in my code to get the OS version of each virtual machine and output it in a different column in my csv log file? EDIT: Here's a more in depth look at things I've tried that have all failed: Get-VM | Foreach-Object { $vm = $_ $svm = Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic" } Foreach-Object {get-VMGuest -VM $svm } | Foreach-Object{Write-output $svm >> $log} } #Get-VM | Foreach-Object { # $vm = $_ # Get-ScsiController -VM $vm | Where-Object { $_.Type -eq "VirtualBusLogic"} #| write-host $vm # | Foreach-Object { # # #get-VMGuest -VM $_ | # #write-host $vm # #get-VMGuest -VM $vm } | Foreach-Object{ # #write-output $vm.VmName >> $log # #write-output $vm.guest.VmName, get-VmGuest -VM $vm >> $log NO GOOD # # Write-host $vm.Guest.VmName #+ get-vmGuest -vm $VM >> $log # # # } # } I'm not sure why get-VmGuest fails though. I'm getting the scsi hardware, filtering the hardware to only get buslogic, and then wanting to get the operating system of just the filtered VMs. I don't see where my code fails though.

  Read the article

• Dual-head monitor system Kubuntu 10.04

  - by andrii

  I have a notebook Asus V6X00V with 1400*1050 monitor(name: LVDS) and Dell Monitor 1920*1080 (VGA-0). I want to have a dual monitor system. At MS Windows everything is working fine. During the Kubuntu installation the Dell and the main notebook monitors have a right resolutions(1920*1080 & 1400*1050). But after some stage it have been changed to the 1152*864 for both. Now the right resolution is only during turning off process and when I am using the console. So it shows that system can use this resolutions. The problem is just in a settings. I am using Size & Orientation - System Settings for setting adjustment. Any option that changes resolution for any monitor or changing position(Absolute, Left Of, Right of and so on) cause the color line noise on the screens. I have tried xrandr: xrandr --output LVDS --mode 1400x1050 --pos 0x0 --output VGA-0 --mode 1920x1080 --right-of LVDS --pos 1400x0 but have received the same result. I have find out that for example the previous version of Randr(1.2, now I have xrandr 1.3) need a xorg.conf file modification to create a big virtual screen, but kubuntu 10.4 don't have xorg.conf and I don't know should I modify xorg for 1.3 version of xrandr or not. Please help me to solve this problem

  Read the article

• Ubuntu 12.10 64bit host reboots when trying to install any guest system using VirtualBox

  - by gts123

  I am having a really nasty problem with VirtualBox as everytime I try to install any guest OS(using ISO file as CD for installation media), the installation starts normally but as soon as it is about to start either installing to virtual hard drive or loading(e.g. as LiveFS) it causes the host system to reboot abruptly. Config is as below: Host system: Ubuntu 12.10 64bit - Intel® Core i7-2640M CPU @ 2.80GHz × 4 Virtualbox version: 4.1.18_Ubuntu r78361 Guest OS systems tried: 32bit version of FreeBSD 9, Debian 6, Tails 0.14 VM setup Tried to have the minimal setup necessary just in case it would avoid for each system to make sure I'd avoid conflicts, but to no avail. I've tried different values and combinations of the below but the problem still persists: Shared Clipboard: Disabled Show in fullscreen/seamless: Disabled Remember runtime changes: DIsabled Base Memory: 2048 MB Chipset: PIIX3 IO APIC: Disabled EFI: Disabled Absolute Pointing device: Disabled Processor(s): 1 CPU PAE/NX: Disabled VT-x/AMD-V: Disabled Video Memory: 12 MB 3d/2d acceleration: Disabled Storage IDE COntroller: PIIX3 (same as chipset instead of PIIX4) Use host I/O cache: No Audio: disabled Network adapter: NAT USB controller: disabled No shared folder Also another sideeffect of the reboot is that it appears that it does not log any information in the error log files; not making things any easier. Please help.

  Read the article

• Can't reliably ping 6224 router from directly-attached system

  - by David Mackintosh

  OK, here's my situation. This is on the internet. The 6224 is the router in this picture and physically resides in Kanata. Both VLAN 1697 and 3994 are provided by an internet service provider. These VLANs are provided through a single 1Gb ethernet wire. The Kanata hosts are directly attached to the 6224; the other two sites are remote. VLAN 3994 is a single IP address space, so theoretically it shouldn't matter physically where the hosts on that subnet are. Here's the problem. I have a monitoring system which is connected further into the internet, so probes from the monitor would come in to this diagram on the 1697 VLAN. When I ping hosts at Albert or Bells Corners from the internet, there is 0 loss. The connection looks perfect. When I ping hosts at Kanata, I lose anywhere from 10 to 40% of the pings. The loss is not predictable, but: when I do lose them, I always lose at least 3, usually 4, rarely more, pings in a bunch. I have attached a monitor directly to the 6224 in Kanata on 3994.. When the monitor pings the 6224 routing interface, I see exactly the same loss pattern -- but NOT at the same time as the loss from the remote system. Ping time is around 1ms. When the monitor pings another system directly attached to the 6224, there is 0 loss. Ping time is about 0.1ms, one-tenth of the time to ping the router. Anyone know what is going on here?

  Read the article

• Dual Boot Installing Ubuntu 12.04 with Windows 7 (64) on a non UEFI system fails

  - by Randnum

  I cannot seem to install the correct boot loader for a non-UEFI firmware system. I'm trying to install Ubuntu 12.04 and Windows 7 (64) which are technically compatible with GPT but for windows only if the firmware is UEFI enabled. My system uses the old BIOS system and does not support UEFI. Therefore, whenever I finish my Ubuntu install and try to install Windows I get a "cannot install to GPT partition type" error. Even if I use Gparted to format a special NTFS file format for windows it can't handle the GPT partition style because it doesn't have UEFI. But my ubuntu install always forces GPT during installation and never asks if I want to install the old BIOS style MBR instead. How do I resolve this? Both OS's will install fine on their own the problem is when I try to install the second OS it doesn't recognize any of the other's partitions and tries to rewrite it's own on top of the other. I've tried both OS's first and always run into the same problem. Since there is no way to make Windows recognize GPT without upgrading my Motherboard how do I tell Ubuntu to use the old BIOS MBR on install? Do I have to download a special Ubuntu with a specific grub version? or should I manaually configure my partition somehow to force it not to use GPT? Thank you,

  Read the article

• Random “Lost connection to MySQL server at 'reading initial communication packet', system error: 0”

  - by user1606545

  Sometimes I get the error from MYSQL server: Lost connection to MySQL server at 'reading initial communication packet', system error: 0 I cannot find the cause, since most of the time it works, but every week for some hours I get this error. I googled, but there seem to be only users which have this error permanently. But in this case, it only occurs sometimes. I checked hosts.allow and hosts.deny, but the host is allowed and not denied. Also sometimes I get the error: File './database/table.MYD' not found (Errcode: 24) It occurs very rarely. But it occurs for some hours once a week, sometimes on multiple days, but suddenly the problem disappears again. I have checked the open files limit. It's 2048 and should be absolutely enough. I also tried to increase the number of open files nevertheless, but no effect. I thought, perhaps the process does not close some tables. But this is impossible, because after a while everythings o.k. again and the process opens maximum 100 tables at once. I also checked the MySQL-runtime-environment, and there were 930 opened files. I cannot explain that. After a while it's 129. I am running a MySQL-Server on a SUSE-Linux machine. I connect to the MySQL-Server from another host by the command line tool "mysql" and by MySQL-C-connector. The MySQL-Server is version 5.0.67.

  Read the article

• Printer deployment via Group Policy not working on a single system

  - by Aron Rotteveel

  One of my coworkers just got a new laptop running Windows 7 Pro x64. We use a GPO to deploy the printers to every system, but for some reason it is not working on this system. I have been breaking my head over this for the past 3 hours now without any result. The strange thing is that gpresult /H seems to indicate that the GPO did run. The hardware: Laptop: Windows 7 Professional x64 Print server: Windows Server 2008 x64 R1 HP Color LaserJet 2605dn HP LaserJet P2015 Driver packages on server: HP universal printer driver PCL5, both X86 as X64 Oddities and other info: GPO working flawlessly on every other system, including my own Windows 7 Ultimate X64 laptop gpresult /H shows the GPO being ran Windows Firewall completely disabled on the new laptop Below is the output for gpresult /H (in Dutch sadly, but I think you'll recognize it): Beleidsregels Windows-instellingen Printerverbindingen Pad Dominerend groepsbeleidsobject \\Server2008\HP Color LaserJet 2605dn Printers \\Server2008\HP LaserJet P2015 Printers Beheersjablonen Beleidsdefinities (ADMX-bestanden) opgehaald van de lokale computer. Configuratiescherm/Printers Beleid Instelling Dominerend groepsbeleidsobject Beperkingen van point-and-print Uitgeschakeld Printers Like I said, I have been trying to figure this out for the past few hours or so without any result, so you are my last hope. Any help is appreciated.

  Read the article

• How to control/check CheckPoint rules changes (and another System events)

  - by user35115

  I need to check/control all system events on many CheckPoint FW1 - don't misunderstand - not rules triggering, but events such admins log on, rules changes and etc. I found out that I can make an log export using 2 methods: Grab logs Use special script that redirect Checkpoint log entries to syslog, FW1-Loggrabber But it's not clear for me does such logs also contain information that i need (admins log on, rules changes)? And If yes is it possible to filter events? I also suppose, that if system bases on *nix platform it must be a ploy - use based functions of the system to do what i want. Unfortunately i don't know where to "dig". May be you know? Updated: New info "FW-1 can pipe its logs to syslog via Unix's logger command, and there are third party log-reading utilities" So, the main question is how do my task in the best way? Has anybody already resolved such problem? P.S. I' m new with CheckPoint, so all information will be useful for me. Thank you.

  Read the article

• Hourly SQL Server 2005 Slowness (Possibly caused by SYSTEM)

  - by Zorlack

  We're trying to diagnose the cause of slowness on our Database server. We're running the latest rev SQL Server 2005 on Windows 2008x64. The behavior that we're seeing is this: We see the SYSTEM process spike one of the CPUs for about 2 minutes, during this time SQL server slows down by a factor of 10. The slowness lasts until SYSTEM is done, then in an hour everything starts again. During these slowdowns disk writes don't spike, paging doesn't spike, the only noticeable precursor we see is that SYSTEM maxes out one of the sixteen (HT)CPUs. Note that this doesn't happen at the top of the hour, it just happens once an hour, and it shifts a bit depending on the length of the incident. At the moment this is causing intermittent slowdowns, but when the server is really busy it can cause Worker Thread starvation. The server is a Dual Quad Dell R710 with 96GB of RAM and RAID10 data/log disks. Has anyone experienced this kind of problem? Does anyone know where we should look? Edit: SQL Server Version is 9.0.4035

  Read the article

• System.ServiceModel.Syndication.SyndicationFeed throws when the RSS document includes a <script> blo

  - by Cheeso

  The code: using (XmlReader xmlr = XmlReader.Create(new StringReader(allXml))) { var items = from item in SyndicationFeed.Load(xmlr).Items select item; } The exception: Exception: System.Xml.XmlException: Unexpected node type Element. ReadElementString method can only be called on elements with simple or empty content. Line 11, position 25. at System.Xml.XmlReader.ReadElementString() at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadXml(XmlReader reader, SyndicationFeed result) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFeed(XmlReader reader) at System.ServiceModel.Syndication.Rss20FeedFormatter.ReadFrom(XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load[TSyndicationFeed](XmlReader reader) at System.ServiceModel.Syndication.SyndicationFeed.Load(XmlReader reader) at Ionic.ToolsAndTests.ReadRss.Run() in c:\dev\dotnet\ReadRss.cs:line 90 The XML content: <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type="text/xsl" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/roller-ui/styles/rss.xsl" media="screen"?><rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:atom="http://www.w3.org/2005/Atom" > <channel> <title>Software architecture, software engineering, and Renaissance Jazz</title> <link>https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch</link> <atom:link rel="self" type="application/rss+xml" href="https://www.ibm.com/developerworks/mydeveloperworks/blogs/gradybooch/feed/entries/rss?lang=en" /> <description>Software architecture, software engineering, and Renaissance Jazz</description> <language>en-us</language> <copyright>Copyright <script type='text/javascript'> document.write(blogsDate.date.localize (1273534889181));</script></copyright> <lastBuildDate>Mon, 10 May 2010 19:41:29 -0400</lastBuildDate> As you can see, on line 11, at position 25, there's a script block inside the <copyright> element. Other people have reported similar errors with other XML documents. The way I worked around this was to do a StreamReader.ReadToEnd, then do Regex.Replace on the result of that to yank out the script block, before passing the modified string to XmlReader.Create(). Feels like a hack. Has anyone got a better approach? I don't like this because I have to read in a 125k string into memory. Is it valid rss to include "complex content" like that - a script block inside an element?

  Read the article

• MSDTC - Communication with the underlying transaction manager has failed (Firewall open, MSDTC netwo

  - by SocialAddict

  I'm having problems with my ASP.NET web forms system. It worked on our test server but now we are putting it live one of the servers is within a DMZ and the SQL server is outside of that (on our network still though - although a different subnet) I have open up the firewall completely between these two boxes to see if that was the issue and it still gives the error message "Communication with the underlying transaction manager has failed" whenever we try and use the "TransactionScope". We can access the data for retrieval it's just transactions that break it. We have also used msdtc ping to test the connection and with the amendments on the firewall that pings successfully, but the same error occurs! How do i resolve this error? Any help would be great as we have a system to go live today. Panic :) Edit: I have created a more straightforward test page with a transaction as below and this works fine. Could a nested transaction cause this kind of error and if so why would this only cause an issue when using a live box in a dmz with a firewall? AuditRepository auditRepository = new AuditRepository(); try { using (TransactionScope scope = new TransactionScope()) { auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#1", 1); auditRepository.Save(); auditRepository.Add(DateTime.Now, 1, "TEST-TRANSACTIONS#2", 1); auditRepository.Save(); scope.Complete(); } } catch (Exception ex) { Response.Write("Test Error For Transaction: " + ex.Message + "<br />" + ex.StackTrace); } This is the ErrorStack we are getting when the problem occurs: at System.Transactions.TransactionInterop.GetOletxTransactionFromTransmitterPropigationToken(Byte[] propagationToken) at System.Transactions.TransactionStatePSPEOperation.PSPEPromote(InternalTransaction tx) at System.Transactions.TransactionStateDelegatedBase.EnterState(InternalTransaction tx) at System.Transactions.EnlistableStates.Promote(InternalTransaction tx) at System.Transactions.Transaction.Promote() at System.Transactions.TransactionInterop.ConvertToOletxTransaction(Transaction transaction) at System.Transactions.TransactionInterop.GetExportCookie(Transaction transaction, Byte[] whereabouts) at System.Data.SqlClient.SqlInternalConnection.GetTransactionCookie(Transaction transaction, Byte[] whereAbouts) at System.Data.SqlClient.SqlInternalConnection.EnlistNonNull(Transaction tx) at System.Data.SqlClient.SqlInternalConnection.Enlist(Transaction tx) at System.Data.SqlClient.SqlInternalConnectionTds.Activate(Transaction transaction) at System.Data.ProviderBase.DbConnectionInternal.ActivateConnection(Transaction transaction) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.Linq.SqlClient.SqlConnectionManager.UseConnection(IConnectionUser user) at System.Data.Linq.SqlClient.SqlProvider.get_IsSqlCe() at System.Data.Linq.SqlClient.SqlProvider.InitializeProviderMode() at System.Data.Linq.SqlClient.SqlProvider.System.Data.Linq.Provider.IProvider.Execute(Expression query) at System.Data.Linq.ChangeDirector.StandardChangeDirector.DynamicInsert(TrackedObject item) at System.Data.Linq.ChangeDirector.StandardChangeDirector.Insert(TrackedObject item) at System.Data.Linq.ChangeProcessor.SubmitChanges(ConflictMode failureMode) at System.Data.Linq.DataContext.SubmitChanges(ConflictMode failureMode) at System.Data.Linq.DataContext.SubmitChanges() at RegBook.classes.DbBase.Save() at RegBook.usercontrols.BookingProcess.confirmBookingButton_Click(Object sender, EventArgs e)

  Read the article

• Application Architecture using WCF and System.AddIn

  - by Silverhalide

  A little background -- we're designing an application that uses a client/server architecture consisting of: A server which loads server-side modules, potentially developed by other teams. A client which loads corresponding client-side modules (also potentially developed by those other teams; each client module corresponds with a server module). The client side communicates with the server side for general coordination, and as well as module specific tasks. (At this point, I think that means client talks to server, client modules talk to server modules.) Environment is .NET 3.5, and client side is WPF. The deployment scenario introduces the potential to upgrade the server, any server-side module, the client, and any client-side module independently. However, being able to "work" using mismatched versions is required. I'm therefore concerned about versioning issues. My thinking so far: A Windows Service for the server. Using System.AddIn for the server to load and communicate with the server modules will give us the greatest flexibility in terms of version compatability between server and server modules. The server and each server module vend WCF services for communication to the client side; communication between the server and a server module, or between two server modules use the AddIn contracts. (One advantage of this is that a module can expose a different interface within the server and outside it.) Similarly, the client uses System.AddIn to find, load, and communicate with the client modules. Client communications with client modules is via the AddIn interface; communications from the client and from client modules to the server side are via WCF. For maximum resilience, each module will run in a separate app-domain. In general, the system has modest performance requirements, so marshalling and crossing process boundaries is not expected to be a performance concern. (Performance requirement is basically summed up by: don't get in the way of the other parts of the system not described here.) My questions are around the idea of having two different communication and versioning models to work with which will be an added burden on our developers. System.AddIn seems quite powerful, but also a little unwieldly. (I'm also unsure of Microsoft's commitment to it in the future.) On the other hand, I'm not thrilled with WCF's versioning capabilities. I have a feeling that it would be possible to implement the System.AddIn view/adapter/contract system within WCF, but being fairly new to both technologies, I would have no idea of where to start. So... Am I on the right track here? Am I doing this the hard way? Are there gotchas I need to be aware of on this road? Thanks.

  Read the article

• asp.net MVC binding specific model results in error for post request

  - by Tomh

  Hi I'm having the following two actions defined in my controller [Authorize] [HttpGet] public ActionResult Edit() { ViewData.Model = HttpContext.User.Identity; return View(); } [Authorize] [HttpPost] public ActionResult Edit(User model) { return View(); } However if I post my editted data to the second action I get the following error: Server Error in '/' Application. An item with the same key has already been added. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.ArgumentException: An item with the same key has already been added. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. I tried several things like renaming parameters and removing editable fields, but it seems the model type is the problem, what could be wrong? Stack Trace: [ArgumentException: An item with the same key has already been added.] System.ThrowHelper.ThrowArgumentException(ExceptionResource resource) +51 System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add) +7464444 System.Linq.Enumerable.ToDictionary(IEnumerable`1 source, Func`2 keySelector, Func`2 elementSelector, IEqualityComparer`1 comparer) +270 System.Linq.Enumerable.ToDictionary(IEnumerable`1 source, Func`2 keySelector, IEqualityComparer`1 comparer) +102 System.Web.Mvc.ModelBindingContext.get_PropertyMetadata() +157 System.Web.Mvc.DefaultModelBinder.BindProperty(ControllerContext controllerContext, ModelBindingContext bindingContext, PropertyDescriptor propertyDescriptor) +158 System.Web.Mvc.DefaultModelBinder.BindProperties(ControllerContext controllerContext, ModelBindingContext bindingContext) +90 System.Web.Mvc.DefaultModelBinder.BindComplexElementalModel(ControllerContext controllerContext, ModelBindingContext bindingContext, Object model) +50 System.Web.Mvc.DefaultModelBinder.BindComplexModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +1048 System.Web.Mvc.DefaultModelBinder.BindModel(ControllerContext controllerContext, ModelBindingContext bindingContext) +280 System.Web.Mvc.ControllerActionInvoker.GetParameterValue(ControllerContext controllerContext, ParameterDescriptor parameterDescriptor) +257 System.Web.Mvc.ControllerActionInvoker.GetParameterValues(ControllerContext controllerContext, ActionDescriptor actionDescriptor) +109 System.Web.Mvc.ControllerActionInvoker.InvokeAction(ControllerContext controllerContext, String actionName) +314 System.Web.Mvc.Controller.ExecuteCore() +105 System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) +39 System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) +7 System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__4() +34 System.Web.Mvc.Async.<>c__DisplayClass1.<MakeVoidDelegate>b__0() +21 System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +12 System.Web.Mvc.Async.WrappedAsyncResult`1.End() +59 System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +44 System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +7 System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +8679150 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155

  Read the article

• Speech recognition plugin Runtime Error: Unhandled Exception. What could possibly cause it?

  - by manuel

  I'm writing a plugin (dll file) for speech recognition, and I'm creating a WinForm as its interface/dialog. When I run the plugin and click a button to start the initialization, I get an unhandled exception. Below is the complete details of it. See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ***** Exception Text ******* System.ArgumentException: Value does not fall within the expected range. at System.Speech.Internal.SapiInterop.SapiProxy.MTAThread.Invoke2(VoidDelegate pfn) at System.Speech.Internal.SapiInterop.SapiRecognizer.SetInput(Object input, Boolean allowFormatChanges) at System.Speech.Recognition.RecognizerBase.SetInputToDefaultAudioDevice() at System.Speech.Recognition.SpeechRecognitionEngine.SetInputToDefaultAudioDevice() at gen_myplugin.Dialog.init() at gen_myplugin.Dialog.btnSpeak_Click(Object sender, EventArgs e) at System.Windows.Forms.Control.OnClick(EventArgs e) at System.Windows.Forms.Button.OnClick(EventArgs e) at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent) at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks) at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.ButtonBase.WndProc(Message& m) at System.Windows.Forms.Button.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ***** Loaded Assemblies ******* mscorlib Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3603 (GDR.050727-3600) CodeBase: file:///c:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll ---------------------------------------- gen_speechquery Assembly Version: 1.0.3755.878 Win32 Version: CodeBase: file:///C:/Program%20Files/Winamp/Plugins/gen_speechquery.dll ---------------------------------------- msvcm90 Assembly Version: 9.0.30729.1 Win32 Version: 9.00.30729.1 CodeBase: file:///C:/WINDOWS/WinSxS/x86_Microsoft.VC90.CRT_1fc8b3b9a1e18e3b_9.0.30729.1_x-ww_6f74963e/msvcm90.dll ---------------------------------------- System.Windows.Forms Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll ---------------------------------------- System Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll ---------------------------------------- System.Drawing Assembly Version: 2.0.0.0 Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll ---------------------------------------- System.Speech Assembly Version: 3.0.0.0 Win32 Version: 3.0.6920.1109 (lh_tools_devdiv_wpf.071009-1109) CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Speech/3.0.0.0__31bf3856ad364e35/System.Speech.dll ***** JIT Debugging ******* To enable just-in-time (JIT) debugging, the .config file for this application or computer (machine.config) must have the jitDebugging value set in the system.windows.forms section. The application must also be compiled with debugging enabled. For example: When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.

  Read the article

• what is the problem in ATM machine program

  - by Have alook

  in this prigramm when the account number is uncorrect it should display a message to write a gain but when i wrote a gain by corrrect account number always it diplay the result of first account also there is aproblem in PIN number ,the use have only three time to try if he enter wrong numbe and if enter three times wrong it should stop the program but it complete to the last part I dont know why pleas help me this is my proram import java.util.*; class assignment2_70307{ public static void main(String args[]){ Scanner m=new Scanner(System.in); int i; i=0; int [] accountNo =new int[7] ;//declear the Accont number array accountNo [0] =1111; accountNo [1] =2222; accountNo [2] =3333; accountNo [3] =4444; accountNo [4] =5555; accountNo [5] =6666; accountNo [6] =7777; int [] PINno =new int[7]; //declear the PIN number array PINno [0] =1234; PINno [1] =5678; PINno [2] =9874; PINno [3] =6523; PINno [4] =1236; PINno [5] =4569; PINno [6] =8521; String [] CusomerNm =new String[7]; //dclear the customer name CusomerNm [0] ="Ali"; CusomerNm [1] ="Ahmed"; CusomerNm [2] ="Amal"; CusomerNm [3] ="Said"; CusomerNm [4] ="Rashid"; CusomerNm [5] ="Fatema"; CusomerNm [6] ="Mariam"; double [] Balance =new double[7]; //declear the Balane array Balance [0] =100.50; Balance [1] =5123.00; Balance [2] =12.00; Balance [3] =4569.00; Balance [4] =1020.25; Balance [5] =0.00; Balance [6] =44.10; System.out.println("Wellcome to mini ATM Machine"); int accountno,pino; accountno=0; pino=0; System.out.println("Please Enter your account number: or -1 to stop" ); accountno=m.nextInt(); if (accountno==accountNo[0]) System.out.print("Customer Name: "+CusomerNm [0]+ "\n" ); else if (accountno==accountNo[1]) System.out.print("Customer Name: "+CusomerNm [1]+ "\n" ); else if (accountno==accountNo[2]) System.out.print("Customer Name: "+CusomerNm [2]+ "\n" ); else if (accountno==accountNo[3]) System.out.print("Customer Name: "+CusomerNm [3]+ "\n" ); else if (accountno==accountNo[4]) System.out.print("Customer Name: "+CusomerNm [4]+ "\n" ); else if (accountno==accountNo[5]) System.out.print("Customer Name: "+CusomerNm [5]+ "\n" ); else if (accountno==accountNo[6]) System.out.print("Customer Name: "+CusomerNm [6]+ "\n" ); // else if (accountNo[0]==-1) //break; else { System.out.println("The account dose not exist,please try again"); //accountNo[i]=m.nextInt(); accountno=m.nextInt(); if(accountNo[i]==accountno) System.out.println("Customer Name: "+CusomerNm[i] ); else System.out.println("The account dose not exist,please try again"); accountno=m.nextInt(); System.out.println("Customer Name: "+CusomerNm[i] ); } System.out.print("Enter your PIN number:"); PINno[i]=m.nextInt(); if(PINno[i]==1234) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [0]+ "Rial"); //return 0; } else if(PINno[i]==5678) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [1]+ "Rial"); // return 1; } else if(PINno[i]==9874) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [2]+ "Rial"); // return 2; } else if(PINno[i]==6523) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [3]+ "Rial"); // return 3; } else if(PINno[i]==1236) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [4]+ "Rial"); // return 4; } else if(PINno[i]==4569) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [5]+ "Rial"); // return 5; } else if(PINno[i]==8521) { System.out.println(PINno[i]); System.out.println("Balance:"+Balance [6]+ "Rial"); // return 6; } else {System.out.println("try again"); //return 7; //if its wrong u can enter PIN number three times only for( i=0;i<2;i++) { System.out.println("enter pin again"); PINno[i]=m.nextInt(); String ss; //ss = "MAnal"; // goto ss ; } } //ss = "m"; int x; x=0; System.out.println("Enter the option from the list /n 1.Deposit /n 2.Withdraw /n 3.Balance"); x=m.nextInt(); double balance,amount; balance=0; amount=0; double deposit ,Withdraw; deposit=0; Withdraw=0; if (x==1){ System.out.println("Enter the amont you want to deposit:"+amount); amount=m.nextDouble(); Balance [i]=Balance [i]+amount; System.out.println("your balance ="+Balance [i]); } else if (x==2) { System.out.println("Enter the amont to withdraw:"); amount=m.nextDouble(); System.out.print(amount); if(Withdraw<=Balance [i]) { Balance [i]=Balance [i]-amount; System.out.println("your balance ="+Balance [i]); } else { System.out.println("sorry,please enter the amont less or equal your balance"); System.out.println(Balance [i]); } } else { if(x==1) { Balance [i]=Balance [i]+deposit; System.out.println("your current balance is :" +Balance [i]); } else { Balance [i]=Balance [i]-Withdraw; System.out.println("your current balance is :"+Balance [i]); } System.out.println("Thank you"); // err() } } }

  Read the article

< Previous Page | 94 95 96 97 98 99 100 101 102 103 104 105  | Next Page >