7 zip - Page 99 - Developer IT

Recover strategy single bad sector in moricon

- by Damon

This week, my harddisk made me an early christmas present in the form of a single defect sector. To make up for the puny size of the present, it chose a sector inside moricons.dll for that. This means that now the system takes about 5 minutes to boot before Windows gives up and moves on, and there's 2 dozen scary "critical failure" entries in the system log after every boot, which is annoying. OK, admittedly, I shouldn't complain, it could be worse, the bad sector could be in ntldr... SMART info more or less indicates (for what SMART can indicate anyway) that the drive is mostly OK. Soft Read Error Rate has a score of 96, and Current Pending Sector Count has a raw value of 8, which translates to a score of 100. Acronis DriveMonitor makes this an issue (lowering the overall rating to 75%), HDD Health calls it "excellent", giving an overall rating of 95% (which is what this harddisk from day one). No single score is below 95 (power on hours and spin up count), and most are 100 anyway. Well, whatever, I've seen drives with perfect SMART values fail from one second to the other, and drives with moderate values work for years. So, I'm inclined not to put too much weight into that overall. TL;DR Now... to the problem: I don't feel like trashing the disk just yet (that's planned with a new OS install upgrading to Win7 early next year, independently of this issue), but in the mean time, I would still like to have a smoothly running system again. Therefore, I feel tempted to tamper with it, but before I render my system entirely unusable (since I've never done this before), I'd like to verify that my planned procedere is likely to suceed in having a working system again: Copy moricons.dl_ from the Windows install disk, rename it to moricons.zip, and unzip it. This gives an intact 5.1.2600.2180 version (the broken one is 5.1.2600.5512 - but I guess this makes not much of a difference, since it's an icon-only DLL, and an outdated copy should work better than one that can't be read) Run chkdsk /r /f` which will "repair" the file (i.e. delete the file without asking, tell the drive to remap the sector, and toss some unreadable junk into a file with a hexadecimal number) Hopefully Windows still boots after this (is that a reasonable expectation, or do I need to have something like BartPE ready? -- but then again, what's that good for in case chkdsk has nuked the entire file system...) Delete the junk file generated by chkdsk, copy the new DLL to %windir%\system32 Reboot. Pray. Maybe I just shouldn't touch anything, since it still kind of works... if annoying, but it works. Unsure... But, is there anything fundamentally wrong with the planned approach? Is this a sensible approach at all?

Read the article

VIM "upgraded" to expandtab and tabstop=8 on Python files

- by dotancohen

After reinstalling my OS from Kubuntu 12.10 to Kubuntu 14.04, VIM has changed its behaviour when editing Python files. Though before the reinstall all file types had noexpandtab and tabstop=4 set, now in Python those values are expandtab and tabstop=8, checked also via VIM behaviour and also via asking VIM set foo?. Non-Python files retain the noexpandtab and tabstop=4 behaviour that I prefer. The .vim direcotry and .vimrc were not touched during the reinstall. It can be seen that no files in .vimrc have been touched in months (with the exception of the irrelevant .netrwhist): - bruno():~$ ls -lat ~/.vim total 68 drwxr-xr-x 85 dotancohen dotancohen 12288 Aug 25 13:00 .. drwxr-xr-x 12 dotancohen dotancohen 4096 Aug 21 11:11 . -rw-r--r-- 1 dotancohen dotancohen 268 Aug 21 11:11 .netrwhist drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 plugin drwxr-xr-x 2 dotancohen dotancohen 4096 Mar 6 18:31 doc drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 syntax drwxrwxr-x 2 dotancohen dotancohen 4096 Nov 29 2013 ftplugin drwxr-xr-x 4 dotancohen dotancohen 4096 Nov 29 2013 autoload drwxrwxr-x 5 dotancohen dotancohen 4096 May 27 2013 after drwxr-xr-x 2 dotancohen dotancohen 4096 Nov 1 2012 spell -rw------- 1 dotancohen dotancohen 138 Aug 14 2012 .directory -rw-rw-r-- 1 dotancohen dotancohen 190 Jul 3 2012 .VimballRecord drwxrwxr-x 2 dotancohen dotancohen 4096 May 12 2012 colors drwxrwxr-x 2 dotancohen dotancohen 4096 Mar 16 2012 mytags drwxrwxr-x 2 dotancohen dotancohen 4096 Feb 14 2012 keymap Though .vimrc has been touched since the reinstall, it was only me testing to see where the problem is. How can I tell what is settingexpandtab and tabstop? Side note: I'm not even sure what I should read in the built-in help for this issue. I started with ":h plugin" but that did not help other than showing me that the following plugins are loaded (possibly relevant): standard-plugin-list Standard plugins pi_getscript.txt Downloading latest version of Vim scripts pi_gzip.txt Reading and writing compressed files pi_netrw.txt Reading and writing files over a network pi_paren.txt Highlight matching parens pi_tar.txt Tar file explorer pi_vimball.txt Create a self-installing Vim script pi_zip.txt Zip archive explorer LOCAL ADDITIONS: local-additions DynamicSigns.txt - Using Signs for different things NrrwRgn.txt A Narrow Region Plugin (similar to Emacs) fugitive.txt A Git wrapper so awesome, it should be illegal indent-object.txt Text objects based on indent levels. taglist.txt Plugin for browsing source code vimwiki.txt A Personal Wiki for Vim

Read the article

nginx+django serving static files

- by avalore

I have followed instruction for setting up django with nginx from the django wiki (https://code.djangoproject.com/wiki/DjangoAndNginx) and have nginx setup as follows (a few name changes to fit my setup). user nginx nginx; worker_processes 2; error_log /var/log/nginx/error_log info; events { worker_connections 1024; use epoll; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] ' '"$request" $status $bytes_sent ' '"$http_referer" "$http_user_agent" ' '"$gzip_ratio"'; client_header_timeout 10m; client_body_timeout 10m; send_timeout 10m; connection_pool_size 256; client_header_buffer_size 1k; large_client_header_buffers 4 2k; request_pool_size 4k; gzip on; gzip_min_length 1100; gzip_buffers 4 8k; gzip_types text/plain; output_buffers 1 32k; postpone_output 1460; sendfile on; tcp_nopush on; tcp_nodelay on; keepalive_timeout 75 20; ignore_invalid_headers on; index index.html; server { listen 80; server_name localhost; location /static/ { root /srv/static/; } location ~* ^.+\.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js|mov) { access_log off; expires 30d; } location / { # host and port to fastcgi server fastcgi_pass 127.0.0.1:8080; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_param REMOTE_ADDR $remote_addr; } access_log /var/log/nginx/localhost.access_log main; error_log /var/log/nginx/localhost.error_log; } } Static files aren't being served (nginx 404). If I look in the access log it seems nginx is looking in /etc/nginx/html/static... rather than /srv/static/ as specified in the config. I've no clue why it's doing this, any help would be hugely appreciated.

Read the article

Htaccess strange behaviour with Nginx

- by Termos

I have a site running on Nginx (v1.0.14) serving as reverse proxy which proxies requests to Apache (v2.2.19). So Nginx runs on port 80, Apache is on 8080. Overall site works fine except that i cannot block access to certain directories with .htaccess file. For example i have 'my-protected-directory' on 'www.site.com' Inside it i have htaccess with following code: <Files *> order deny,allow deny from all allow from 1.2.3.4 <--- my ip address here </Files> When i try to access this page with my ip (1.2.3.4) i get 404 error which is not what i expect: http://www.site.com/my-protected-directory However everything works as expected when this page is served directly by Apache. I can see this page, everyone else can't. http://www.site.com:8080/my-protected-directory Update. Nginx config (7.1.3.7 is site ip.): user apache; worker_processes 4; error_log logs/error.log; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; sendfile on; keepalive_timeout 65; gzip on; gzip_min_length 1024; gzip_http_version 1.1; gzip_proxied any; gzip_comp_level 5; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript image/x-icon; server { listen 80; server_name www.site.com site.com 7.1.3.7; access_log logs/host.access.log main; # serve static files location ~* ^.+.(jpg|jpeg|gif|png|ico|css|zip|tgz|gz|rar|bz2|doc|xls|exe|pdf|ppt|txt|tar|mid|midi|wav|bmp|rtf|js)$ { root /var/www/vhosts/www.site.com/httpdocs; proxy_set_header Range ""; expires 30d; } # pass requests for dynamic content to Apache location / { proxy_redirect off; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Range ""; proxy_pass http://7.1.3.7:8080; } } Could please anyone tell me what is wrong and how this can be fixed ?

Read the article

Removing file with strange characters in filename in OS X

- by SiggyF

After a memory error in my program, I am stuck with a file with a strange filename. It's proving quite resistant to all normal methods to remove files with strange names. The filename is: %8BUȅ҉%95d%F8%FF%FF\x0f%8E%8F%FD%FF%FF%8B%B5T%F8%FF%FF%8B%85\%F8%FF%FF\x03%85x%F8%FF%FF%8B%95D%F8%FF%FF%8B%BD%9C%F8%FF%FF%8D\x04%86%8B%B5@%F8%FF%FF%89%85%90%F8%FF%FF%8B%85X%F8%FF%FF\x03%85%9C%F8%FF%FF%C1%E7\x02%8B%8Dx I tried the following: rm * - "No such file or directory" rm -- filename - "No such file or directory" rm "filename" - "No such file or directory" ls -i to get the inode number - "No such file or directory" stat filename - "No such file or directory" zip the directory where the file is in - error occured while adding "" to the archive. delete directory in finder - error -43 in python: os.unlink(os.listdir(u'.')[0]) - OSError No such file or directory find . -type f -exec rm {} \; - "No such file or directory" checked for locks on the file with lsof - no locks All these attempts result in a file (long filename here) not found error, or error -43. Even the ls -i. I couldn't find anymore options, so before reformatting or repairing my filesystem (fsck might help) I thought maybe there is something I missed. I wrote this small c program to get the inode: #include <stdio.h> #include <stddef.h> #include <sys/types.h> int main(void) { DIR *dp; struct dirent *ep; dp = opendir ("./"); if (dp != NULL) { while (ep = readdir (dp)) { printf("d_ino=%ld, ", (unsigned long) ep->d_ino); printf("d_name=%s.\n", ep->d_name); } (void) closedir (dp); } else perror ("Couldn't open the directory"); return 0; } That works. I now have the inode, but the normal find -inum inode -exec rm '{}' \; doesn't work. I think I have to use the clri now.

Read the article

StackOverFlowError while creating Mac object on AS400/Java

- by Prasanna K Rao

Hello all, I am a newbie to AS400-Java programming. I am trying to create my first program to test the implementation of Message Authentication Code (MAC). I am trying to use the HMACSHA1 hash function. My (Java 1.4) program runs fine on a dev box (V5R4).But fails terribly on the QA box (V5R3). My program is as below: ===================================================== import java.security.InvalidKeyException; import java.security.NoSuchAlgorithmException; import java.security.Security; import java.security.Provider; import javax.crypto.Mac; import javax.crypto.spec.SecretKeySpec; import javax.crypto.SecretKey; public class Test01 { private static final String HMAC_SHA1_ALGORITHM = "HmacSHA1"; public static void main (String [] arguments) { byte[] key = { 1,2,3,4,5,6,7,8}; SecretKeySpec SHA1key = new SecretKeySpec(key, "HmacSHA1"); Mac hmac; String strFinalRslt = ""; try { hmac = Mac.getInstance("HmacSHA1"); hmac.init(SHA1key); byte[] result = hmac.doFinal(); strFinalRslt = toHexString(result); }catch (NoSuchAlgorithmException e) { // TODO Auto-generated catch block e.printStackTrace(); }catch (InvalidKeyException e) { // TODO Auto-generated catch block e.printStackTrace(); }catch(StackOverflowError e){ e.printStackTrace(); } System.out.println(strFinalRslt); System.out.println("All done!!!"); } public static byte[] fromHexString ( String s ) { int stringLength = s.length(); if ( (stringLength & 0x1) != 0 ) { throw new IllegalArgumentException ( "fromHexString requires an even number of hex characters" ); } byte[] b = new byte[stringLength / 2]; for ( int i=0,j=0; i 4] ); //look up low nibble char sb.append( hexChar [b[i] & 0x0f] ); } return sb.toString(); } static char[] hexChar = { '0' , '1' , '2' , '3' , '4' , '5' , '6' , '7' , '8' , '9' , 'a' , 'b' , 'c' , 'd' , 'e' , 'f'}; } This program compiles fine and gets the correct response on my win-xp client and also my dev box. But, fails with the following error on the QA box: java.lang.StackOverflowError at java.lang.Throwable.(Throwable.java:180) at java.lang.Error.(Error.java:37) at java.lang.StackOverflowError.(StackOverflowError.java:24) at java.io.Os400FileSystem.list(Native method) at java.io.File.list(File.java:922) at javax.crypto.b.e(Unknown source) at javax.crypto.b.a(Unknown source) at javax.crypto.b.c(Unknown source) at javax.crypto.b£0.run(Unknown source) at javax.crypto.b.(Unknown source) at javax.crypto.Mac.getInstance(Unknown source) I have verified the java.security file and entry corresponding to the jce files are all ok. The DMPJVM command gives me the following response: Thu Jun 03 12:25:34 E Java Virtual Machine Information 016822/QPGMR/11111 ........................................................................ . Classpath . ........................................................................ java.version=1.4 sun.boot.class.path=/QIBM/ProdData/OS400/Java400/jdk/lib/jdkptf14.zip:/QIBM /ProdData/OS400/Java400/ext/ibmjssefw.jar:/QIBM/ProdData/CAP/ibmjsseprovide r.jar:/QIBM/ProdData/OS400/Java400/ext/ibmjsseprovider2.jar:/QIBM/ProdData/ OS400/Java400/ext/ibmpkcs11impl.jar:/QIBM/ProdData/CAP/ibmjssefips.jar:/QIB M/ProdData/OS400/Java400/jdk/lib/IBMiSeriesJSSE.jar:/QIBM/ProdData/OS400/Ja va400/jdk/lib/jce.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/jaas.jar:/QIBM/P rodData/OS400/Java400/jdk/lib/ibmcertpathfw.jar:/QIBM/ProdData/OS400/Java40 0/jdk/lib/ibmcertpathprovider.jar:/QIBM/ProdData/OS400/Java400/ext/ibmpkcs. jar:/QIBM/ProdData/OS400/Java400/jdk/lib/ibmjgssfw.jar:/QIBM/ProdData/OS400 /Java400/jdk/lib/ibmjgssprovider.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/s ecurity.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/charsets.jar:/QIBM/ProdDat a/OS400/Java400/jdk/lib/resources.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/ rt.jar:/QIBM/ProdData/OS400/Java400/jdk/lib/sunrsasign.jar:/QIBM/ProdData/O S400/Java400/ext/IBMmisc.jar:/QIBM/ProdData/Java400/ java.class.path=/myhome/lib/commons-codec-1.3.jar:/myhome/lib/commons-httpc lient-3.1.jar:/myhome/lib/commons-logging-1.1.jar:/myhome/lib/log4j-1.2.15.jar:/myhome/lib/log4j-core.jar ; java.ext.dirs=/QIBM/ProdData/OS400/Java400/jdk/lib/ext:/QIBM/UserData/Java4 00/ext:/QIBM/ProdData/Java400/jdk14/lib/ext java.library.path=/QSYS.LIB/ROBOTLIB.LIB:/QSYS.LIB/QTEMP.LIB:/QSYS.LIB/ODIP GM.LIB:/QSYS.LIB/QGPL.LIB ........................................................................ . Garbage Collection . ........................................................................ Garbage collector parameters Initial size: 16384 K Max size: 240000000 K Current values Heap size: 437952 K Garbage collections: 58 Additional values JIT heap size: 53824 K JVM heap size: 55752 K Last GC cycle time: 1333 ms ........................................................................ . Thread information . ........................................................................ Information for 4 thread(s) of 4 thread(s) processed Thread: 00000004 Thread-0 TDE: B00380000BAA0000 Thread priority: 5 Thread status: Running Thread group: main Runnable: java/lang/Thread Stack: java/io/Os400FileSystem.list(Ljava/io/File;)[Ljava/lang/String;+0 (Os400FileSystem.java:0) java/io/File.list()[Ljava/lang/String;+19 (File.java:922) javax/crypto/b.e()[B+127 (:0) javax/crypto/b.a(Ljava/security/cert/X509Certificate;)V+7 (:0) javax/crypto/b.access$500(Ljava/security/cert/X509Certificate;)V+1 (:0) javax/crypto/b$0.run()Ljava/lang/Object;+98 (:0) javax/crypto/b.()V+507 (:0) javax/crypto/Mac.getInstance(Ljava/lang/String;)Ljavax/crypto/Mac;+10 (:0) Locks: None Thread: 00000007 jitcompilethread TDE: B00380000BD58000 Thread priority: 5 Thread status: Java wait Thread group: system Runnable: java/lang/Thread Stack: None Locks: None Thread: 00000005 Reference Handler TDE: B00380000BAAC000 Thread priority: 10 Thread status: Waiting Wait object: java/lang/ref/Reference$Lock Thread group: system Runnable: java/lang/ref/Reference$ReferenceHandler Stack: java/lang/Object.wait()V+1 (Object.java:452) java/lang/ref/Reference$ReferenceHandler.run()V+47 (Reference.java:169) Locks: None Thread: 00000006 Finalizer TDE: B00380000BAB3000 Thread priority: 8 Thread status: Waiting Wait object: java/lang/ref/ReferenceQueue$Lock Thread group: system Runnable: java/lang/ref/Finalizer$FinalizerThread Stack: java/lang/ref/ReferenceQueue.remove(J)Ljava/lang/ref/Reference;+43 (ReferenceQueue.java:111) java/lang/ref/ReferenceQueue.remove()Ljava/lang/ref/Reference;+1 (ReferenceQueue.java:127) java/lang/ref/Finalizer$FinalizerThread.run()V+3 (Finalizer.java:171) Locks: None ........................................................................ . Class loader information . ........................................................................ 0 Default class loader 1 sun/reflect/DelegatingClassLoader 2 sun/misc/Launcher$ExtClassLoader ........................................................................ . GC heap information . ........................................................................ Loader Objects Class name ------ ------- ---------- 0 1493 [C 0 2122181 java/lang/String 0 47 [Ljava/util/Hashtable$Entry; 0 68 [Ljava/lang/Object; 0 1016 java/lang/Class 0 31 java/util/HashMap 0 37 java/util/Hashtable 0 2 java/lang/ThreadGroup 0 2 java/lang/RuntimePermission 0 2 java/lang/ref/ReferenceQueue$Null 0 5 java/lang/ref/ReferenceQueue 0 50 java/util/Vector 0 4 java/util/Stack 0 3 sun/misc/SoftCache 0 1 [Ljava/lang/ThreadGroup; 0 5 [Ljava/io/ObjectStreamField; 0 1 sun/reflect/ReflectionFactory 0 7 java/lang/ref/ReferenceQueue$Lock 0 10 java/lang/Object 0 1 java/lang/String$CaseInsensitiveComparator 0 1 java/util/Hashtable$EmptyEnumerator 0 1 java/util/Hashtable$EmptyIterator 0 33 [Ljava/util/HashMap$Entry; 0 19210 [J 0 1 sun/nio/cs/StandardCharsets 0 5 java/util/TreeMap 0 1075 java/util/TreeMap$Entry 0 469 [Ljava/lang/String; 0 1 java/lang/StringBuffer 0 2 java/io/FileInputStream 0 2 java/io/FileOutputStream 0 2 java/io/BufferedOutputStream 0 1 java/lang/reflect/ReflectPermission 0 1 [[Ljava/lang/ref/SoftReference; 0 2 [Ljava/lang/ref/SoftReference; 0 2 sun/nio/cs/Surrogate$Parser 0 3 sun/misc/Signal 0 1 [Ljava/io/File; 0 6 java/io/File 0 1 java/util/BitSet 0 17 sun/reflect/NativeConstructorAccessorImpl 0 2 java/net/URLClassLoader$ClassFinder 0 12 java/util/ArrayList 0 32 java/io/RandomAccessFile 0 16 java/lang/Thread 0 1 java/lang/ref/Reference$ReferenceHandler 0 1 java/lang/ref/Finalizer$FinalizerThread 0 266 [B 0 2 java/util/Properties 0 71 java/lang/ref/Finalizer 0 2 com/ibm/nio/cs/DirectEncoder 0 38 java/lang/reflect/Constructor 0 33 java/util/jar/JarFile 0 19200 java/lang/StackOverflowError 0 5 java/security/AccessControlContext 0 2 [Ljava/lang/Thread; 0 4 java/lang/OutOfMemoryError 0 1065 java/util/Hashtable$Entry 0 1 java/io/BufferedInputStream 0 2 java/io/PrintStream 0 2 java/io/OutputStreamWriter 0 428 [I 0 3 java/lang/ClassLoader$NativeLibrary 0 25 java/util/Locale 0 3 sun/misc/URLClassPath 0 30 java/util/zip/Inflater 0 612 java/util/HashMap$Entry 0 2 java/io/FilePermission 0 10 java/io/ObjectStreamField 0 1 java/security/BasicPermissionCollection 0 2 java/security/ProtectionDomain 0 1 java/lang/Integer$1 0 1 java/lang/ref/Reference$Lock 0 1 java/lang/Shutdown$Lock 0 1 java/lang/Runtime 0 36 java/io/FileDescriptor 0 1 java/lang/Long$1 0 202 java/lang/Long 0 3 java/lang/ThreadLocal 0 3 java/nio/charset/CodingErrorAction 0 2 java/nio/charset/CoderResult 0 1 java/nio/charset/CoderResult$1 0 1 java/nio/charset/CoderResult$2 0 1 sun/misc/Unsafe 0 2 java/nio/ByteOrder 0 1 java/io/Os400FileSystem 0 3 java/lang/Boolean 0 1 java/lang/Terminator$1 0 23 java/lang/Integer 0 2 sun/misc/NativeSignalHandler 0 1 sun/misc/Launcher$Factory 0 1 sun/misc/Launcher 0 53 [Ljava/lang/Class; 0 1 java/lang/reflect/ReflectAccess 0 18 sun/reflect/DelegatingConstructorAccessorImpl 0 1 sun/net/www/protocol/file/Handler 0 3 java/util/HashSet 0 3 sun/net/www/protocol/jar/Handler 0 1 java/util/jar/JavaUtilJarAccessImpl 0 1 java/net/UnknownContentHandler 0 2 [Ljava/security/Principal; 0 10 [Ljava/security/cert/Certificate; 0 2 sun/misc/AtomicLongCSImpl 0 3 sun/reflect/DelegatingMethodAccessorImpl 0 1 sun/security/util/ByteArrayLexOrder 0 1 sun/security/util/ByteArrayTagOrder 0 7 sun/security/x509/CertificateVersion 0 7 sun/security/x509/CertificateSerialNumber 0 7 sun/security/x509/SerialNumber 0 7 sun/security/x509/CertificateAlgorithmId 0 7 sun/security/x509/CertificateIssuerName 0 60 sun/security/x509/RDN 0 60 [Lsun/security/x509/AVA; 0 67 sun/security/util/DerInputStream 0 3 [Ljava/math/BigInteger; 0 2 com/ibm/nio/cs/Converter 0 2 sun/nio/cs/StreamEncoder$CharsetSE 0 35 java/lang/ref/SoftReference 0 2 java/nio/HeapByteBuffer 0 2 java/io/BufferedWriter 0 33 sun/misc/URLClassPath$JarLoader 0 4 java/lang/ThreadLocal$ThreadLocalMap$Entry 0 76 java/net/URL 0 1 sun/misc/Launcher$ExtClassLoader 0 1 sun/misc/Launcher$AppClassLoader 0 4 java/lang/Throwable 0 7 java/lang/reflect/Method 0 2 sun/misc/URLClassPath$FileLoader 0 2 java/security/CodeSource 0 2 java/security/Permissions 0 2 java/io/FilePermissionCollection 0 1 java/lang/ThreadLocal$ThreadLocalMap 0 1 javax/crypto/spec/SecretKeySpec 0 17 java/util/jar/Attributes$Name 0 1 [Ljava/lang/ThreadLocal$ThreadLocalMap$Entry; 0 1 java/security/SecureRandom 0 2 sun/security/provider/Sun 0 1 java/util/jar/JarFile$JarFileEntry 0 1 java/util/jar/JarVerifier 0 3 sun/reflect/NativeMethodAccessorImpl 0 116 sun/security/util/ObjectIdentifier 0 1 java/lang/Package 0 2 [S 0 104 java/math/BigInteger 0 20 sun/security/x509/AlgorithmId 0 14 sun/security/x509/X500Name 0 14 [Lsun/security/x509/RDN; 0 60 sun/security/x509/AVA 0 67 sun/security/util/DerValue 0 67 sun/security/util/DerInputBuffer 0 21 sun/security/x509/AVAKeyword 0 6 sun/security/x509/X509CertImpl 0 7 sun/security/x509/X509CertInfo 0 1 [Lsun/security/util/ObjectIdentifier; 0 1 [[Ljava/lang/Byte; 0 3 [[B 0 7 sun/security/provider/DSAPublicKey 0 7 sun/security/x509/AuthorityKeyIdentifierExtension 0 12 [Ljava/lang/Byte; 0 14 java/lang/Byte 0 7 sun/security/x509/CertificateSubjectName 0 7 sun/security/x509/CertificateX509Key 0 14 sun/security/x509/KeyIdentifier 0 4 [Z 0 5 sun/text/Normalizer$Mode 0 7 sun/security/x509/CertificateValidity 0 14 java/util/Date 0 7 sun/security/provider/DSAParameters 0 7 sun/security/util/BitArray 0 7 sun/security/x509/CertificateExtensions 0 7 java/security/AlgorithmParameters 0 7 sun/security/x509/SubjectKeyIdentifierExtension 0 5 sun/security/x509/BasicConstraintsExtension 0 2 sun/security/x509/KeyUsageExtension 0 1 sun/text/CompactCharArray 0 1 sun/text/CompactByteArray 0 1 sun/net/www/protocol/jar/JarFileFactory 0 1 java/util/Collections$EmptySet 0 1 java/util/Collections$EmptyList 0 1 java/util/Collections$ReverseComparator 0 1 com/ibm/security/jgss/i18n/PropertyResource 0 1 javax/crypto/b$0 0 1 sun/security/provider/X509Factory 0 1 sun/reflect/BootstrapConstructorAccessorImpl 1 1 sun/reflect/GeneratedConstructorAccessor3202134454 2 1 com/ibm/crypto/provider/IBMJCE 0 6 java/util/ResourceBundle$LoaderReference 0 1 [Lsun/security/x509/NetscapeCertTypeExtension$MapEntry; 0 1 com/sun/rsajca/Provider 0 1 com/ibm/security/cert/IBMCertPath 0 1 com/ibm/as400/ibmonly/net/ssl/Provider 0 1 com/ibm/jsse/IBMJSSEProvider 0 1 com/ibm/security/jgss/IBMJGSSProvider 0 5 org/ietf/jgss/Oid 0 1 java/util/PropertyResourceBundle 0 7 java/util/ResourceBundle$ResourceCacheKey 0 2 sun/net/www/protocol/jar/URLJarFile 0 6 sun/misc/SoftCache$ValueCell 0 1 java/util/Random 0 1 java/util/Collections$EmptyMap 0 112 com/ibm/security/util/ObjectIdentifier 0 5 java/security/Security$ProviderProperty 0 1 java/security/cert/CertificateFactory 0 1 sun/security/provider/SecureRandom 0 2 java/security/MessageDigest$Delegate 0 2 sun/security/provider/SHA 0 1 sun/util/calendar/ZoneInfo 0 4 com/ibm/security/x509/X500Name 0 2 [Ljava/security/cert/X509Certificate; 0 1 sun/reflect/DelegatingClassLoader 0 1 sun/security/x509/NetscapeCertTypeExtension 0 7 sun/security/x509/NetscapeCertTypeExtension$MapEntry 0 3 [[Ljava/lang/String; 0 3 java/util/Arrays$ArrayList 0 7 com/ibm/security/x509/NetscapeCertTypeExtension$MapEntry 0 1 com/ibm/security/validator/EndEntityChecker 0 1 java/util/AbstractList$Itr 0 1 com/ibm/security/util/ByteArrayLexOrder 0 1 com/ibm/security/util/ByteArrayTagOrder 0 18 [Lcom/ibm/security/x509/AVA; 0 18 com/ibm/security/util/DerInputStream 0 5 com/ibm/security/util/text/Normalizer$Mode 0 1 com/ibm/security/validator/SimpleValidator 0 1 [Lcom/ibm/security/x509/NetscapeCertTypeExtension$MapEntry; 0 4 [Lcom/ibm/security/x509/RDN; 0 1 java/util/Hashtable$Enumerator 0 4 java/util/LinkedHashMap$Entry 0 1 sun/text/resources/LocaleElements 0 1 sun/text/resources/LocaleElements_en 0 22 com/ibm/security/x509/AVAKeyword 0 4 javax/security/auth/x500/X500Principal 0 18 com/ibm/security/x509/RDN 0 18 com/ibm/security/x509/AVA 0 18 com/ibm/security/util/DerInputBuffer 0 18 com/ibm/security/util/DerValue 0 1 com/ibm/security/util/text/CompactCharArray 0 1 com/ibm/security/util/text/CompactByteArray 0 2 java/util/LinkedHashMap 0 1 java/net/InetAddress$1 0 2 [Ljava/net/InetAddress; 0 2 java/net/InetAddress$Cache 0 1 java/net/Inet4AddressImpl 0 3 java/net/Inet4Address 0 2 java/net/InetAddress$CacheEntry ........................................................................ . Global registry information . ........................................................................ Loader Objects Class name ------ ------- ---------- 0 23 [C 0 1017 java/lang/Class 0 1 java/lang/ref/Reference$ReferenceHandler 0 1 java/lang/ref/Finalizer$FinalizerThread 0 1 sun/misc/Launcher$AppClassLoader 0 32 java/io/RandomAccessFile 0 32 [B Can someone please advise me? Thanks a lot, Prasanna

Read the article

Sonar Analysis crashing with default configuration in Maven

- by Robert Mandeville

I'm starting to experiment with Sonar, and having trouble. I'm running everything on the same Red Hat Linux server, against Java 1.6.10. I launched the server with "bin/linux-x86-32" (the JVM is 32-bit). The sonar.log shows no SEVERE or ERROR and one WARNING, that I'm using the default Derby database (I'll fix that once I get things running at all). I am trying to build a Maven project that builds a JAR. I made no Sonar-specific changes (other than one described below). I can run "mvn clean install" with no problem. However, if I then run "mvn -e sonar:sonar", I get the stacktrace listed below. The server logs no events. I added the dependency "commons-pool:commons-pool:20030825.183949, but to no avail. Any idea as to what I'm doing wrong? [INFO] Error stacktraces are turned on. [INFO] Scanning for projects... [INFO] [INFO] ------------------------------------------------------------------------ [INFO] Building buildUtil 1.0 [INFO] ------------------------------------------------------------------------ [INFO] [INFO] --- sonar-maven-plugin:2.0:sonar (default-cli) @ buildUtil --- [INFO] Sonar version: 2.14 [WARN] [14:54:17.730] Derby database should be used for evaluation purpose only [INFO] [14:54:17.732] Create JDBC datasource [INFO] ------------------------------------------------------------------------ [INFO] BUILD FAILURE [INFO] ------------------------------------------------------------------------ [INFO] Total time: 2.130s [INFO] Finished at: Mon Apr 09 14:54:17 EDT 2012 [INFO] Final Memory: 8M/198M [INFO] ------------------------------------------------------------------------ [ERROR] Failed to execute goal org.codehaus.mojo:sonar-maven-plugin:2.0:sonar (default-cli) on project buildUtil: Can not execute Sonar: PicoLifecycleException: method 'public final org.sonar.core.persistence.DefaultDatabase org.sonar.core.persistence.DefaultDatabase.start()', instance 'org.sonar.batch.bootstrap.BatchDatabase@41b635, java.lang.RuntimeException: wrapper: org/apache/commons/pool/impl/GenericObjectPool: org.apache.commons.pool.impl.GenericObjectPool -> [Help 1] org.apache.maven.lifecycle.LifecycleExecutionException: Failed to execute goal org.codehaus.mojo:sonar-maven-plugin:2.0:sonar (default-cli) on project buildUtil: Can not execute Sonar at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:217) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:153) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:145) at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:84) at org.apache.maven.lifecycle.internal.LifecycleModuleBuilder.buildProject(LifecycleModuleBuilder.java:59) at org.apache.maven.lifecycle.internal.LifecycleStarter.singleThreadedBuild(LifecycleStarter.java:183) at org.apache.maven.lifecycle.internal.LifecycleStarter.execute(LifecycleStarter.java:161) at org.apache.maven.DefaultMaven.doExecute(DefaultMaven.java:319) at org.apache.maven.DefaultMaven.execute(DefaultMaven.java:156) at org.apache.maven.cli.MavenCli.execute(MavenCli.java:537) at org.apache.maven.cli.MavenCli.doMain(MavenCli.java:196) at org.apache.maven.cli.MavenCli.main(MavenCli.java:141) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.codehaus.plexus.classworlds.launcher.Launcher.launchEnhanced(Launcher.java:290) at org.codehaus.plexus.classworlds.launcher.Launcher.launch(Launcher.java:230) at org.codehaus.plexus.classworlds.launcher.Launcher.mainWithExitCode(Launcher.java:409) at org.codehaus.plexus.classworlds.launcher.Launcher.main(Launcher.java:352) Caused by: org.apache.maven.plugin.MojoExecutionException: Can not execute Sonar at org.codehaus.mojo.sonar.Bootstraper.executeMojo(Bootstraper.java:118) at org.codehaus.mojo.sonar.Bootstraper.start(Bootstraper.java:65) at org.codehaus.mojo.sonar.SonarMojo.execute(SonarMojo.java:90) at org.apache.maven.plugin.DefaultBuildPluginManager.executeMojo(DefaultBuildPluginManager.java:101) at org.apache.maven.lifecycle.internal.MojoExecutor.execute(MojoExecutor.java:209) ... 19 more Caused by: org.picocontainer.PicoLifecycleException: PicoLifecycleException: method 'public final org.sonar.core.persistence.DefaultDatabase org.sonar.core.persistence.DefaultDatabase.start()', instance 'org.sonar.batch.bootstrap.BatchDatabase@41b635, java.lang.RuntimeException: wrapper at org.picocontainer.monitors.NullComponentMonitor.lifecycleInvocationFailed(NullComponentMonitor.java:77) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.monitorAndThrowReflectionLifecycleException(ReflectionLifecycleStrategy.java:132) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.invokeMethod(ReflectionLifecycleStrategy.java:115) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.start(ReflectionLifecycleStrategy.java:89) at org.picocontainer.injectors.AbstractInjectionFactory$LifecycleAdapter.start(AbstractInjectionFactory.java:84) at org.picocontainer.behaviors.AbstractBehavior.start(AbstractBehavior.java:169) at org.picocontainer.behaviors.Stored$RealComponentLifecycle.start(Stored.java:132) at org.picocontainer.behaviors.Stored.start(Stored.java:110) at org.picocontainer.DefaultPicoContainer.potentiallyStartAdapter(DefaultPicoContainer.java:1009) at org.picocontainer.DefaultPicoContainer.startAdapters(DefaultPicoContainer.java:1002) at org.picocontainer.DefaultPicoContainer.start(DefaultPicoContainer.java:760) at org.sonar.api.platform.ComponentContainer.startComponents(ComponentContainer.java:70) at org.sonar.batch.bootstrap.Module.start(Module.java:82) at org.sonar.batch.bootstrapper.Batch.startBatch(Batch.java:71) at org.sonar.batch.bootstrapper.Batch.execute(Batch.java:58) at org.sonar.maven3.SonarMojo.execute(SonarMojo.java:143) at org.codehaus.mojo.sonar.Bootstraper.executeMojo(Bootstraper.java:113) ... 23 more Caused by: java.lang.RuntimeException: wrapper at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.monitorAndThrowReflectionLifecycleException(ReflectionLifecycleStrategy.java:130) ... 38 more Caused by: java.lang.NoClassDefFoundError: org/apache/commons/pool/impl/GenericObjectPool at org.apache.commons.dbcp.BasicDataSourceFactory.createDataSource(BasicDataSourceFactory.java:152) at org.sonar.core.persistence.DefaultDatabase.initDatasource(DefaultDatabase.java:114) at org.sonar.core.persistence.DefaultDatabase.start(DefaultDatabase.java:60) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.picocontainer.lifecycle.ReflectionLifecycleStrategy.invokeMethod(ReflectionLifecycleStrategy.java:110) ... 37 more Caused by: java.lang.ClassNotFoundException: org.apache.commons.pool.impl.GenericObjectPool at org.codehaus.plexus.classworlds.strategy.SelfFirstStrategy.loadClass(SelfFirstStrategy.java:50) at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:244) at org.codehaus.plexus.classworlds.realm.ClassRealm.loadClass(ClassRealm.java:230) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320) ... 45 more [ERROR] [ERROR] Re-run Maven using the -X switch to enable full debug logging. [ERROR] [ERROR] For more information about the errors and possible solutions, please read the following articles: [ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException The POM I'm using is: <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.phoenix.build</groupId> <artifactId>buildUtil</artifactId> <version>1.0</version> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> </properties> <build> <sourceDirectory>src/main/java</sourceDirectory> <testSourceDirectory>src/test/java</testSourceDirectory> <plugins> <plugin> <artifactId>maven-compiler-plugin</artifactId> <version>2.3.2</version> <configuration> <source>1.6</source> <target>1.6</target> </configuration> </plugin> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-surefire-plugin</artifactId> <version>2.7.2</version> <configuration> <excludes> <exclude>**/*integrationTest.java</exclude> </excludes> </configuration> <executions> <execution> <id>integration-tests</id> <phase>integration-test</phase> <goals> <goal>test</goal> </goals> <configuration> <skip>false</skip> <excludes> <exclude>none</exclude> </excludes> <includes> <include>**/*integrationTest.java</include> </includes> </configuration> </execution> </executions> </plugin> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-jar-plugin</artifactId> <version>2.2</version> <executions> <execution> <goals> <goal>test-jar</goal> </goals> </execution> </executions> </plugin> </plugins> </build> <dependencies> <dependency> <groupId>commons-cli</groupId> <artifactId>commons-cli</artifactId> <version>1.2</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>jaxen</groupId> <artifactId>jaxen</artifactId> <version>1.1.1</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>dom4j</groupId> <artifactId>dom4j</artifactId> <version>1.6.1</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>4.8.2</version> <type>jar</type> <scope>test</scope> <optional>false</optional> </dependency> <dependency> <groupId>org.apache.maven</groupId> <artifactId>maven-artifact</artifactId> <version>2.0</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>org.codehaus.plexus</groupId> <artifactId>plexus-classworlds</artifactId> <version>2.2.2</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>Common</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2fs</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2java</artifactId> <version>9.7</version> <type>zip</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc_javax</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc_license_cisuz</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2jcc_license_cu</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2policy</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>sqlj</artifactId> <version>9.7</version> <type>zip</type> <optional>false</optional> </dependency> <dependency> <groupId>com.ibm.db2</groupId> <artifactId>db2qgjava</artifactId> <version>9.7</version> <type>jar</type> <optional>false</optional> </dependency> </dependencies>

Read the article

please help me to add the html fields in the following link [closed]

- by user237389

Link Name: http://business.careerbuilderinstitute.com/testportal/webservices/iscapi.asmx/CreateUser html code register.html <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Web-Service User Registration Form</title> </head> <body> <b style="font-size:20px; color:#3366CC">CreateUser</b><br/><br/> Create a user account. User may be assigned to a particular hierarchy level.<br/><br/> <b>Test</b><br/><br/> To test the operation using the HTTP POST protocol, click the 'Invoke' button. <form action="http://business.careerbuilderinstitute.com/testportal/webservices/iscapi.asmx/CreateUser" method="POST"/> <table width="542" border="0" style="margin-left:25px;"> <tr> <th width="172" style="background-color:#c0c0c0;">Parameter</th> <th width="360" style="background-color:#c0c0c0;">Value</th> </tr> <tr> <input name="authorizationId" type="text" value="TestService" size="60" /> </tr> <tr> <input name="passcode" type="hidden" value="welcome" size="60"/> </tr> <tr> <input name="organizationId" type="hidden" value="27" size="60"/> </tr> <tr> <input name="globalUniqueId" type="hidden" value="GUID" size="60"/> </tr> <tr> <input name="hierarchyID" type="hidden" value="0" size="60"/> </tr> <tr> <input name="hireDate" type="hidden" value="1" size="60"/> </tr> <tr> <input name="studentProfileId" type="hidden" value="0" size="60"/> </tr> <tr> <input name="alternateId" type="hidden" value="0" size="60"/> </tr> <tr> <input name="alternateId2" type="hidden" value="0" size="60"/> </tr> <tr> <input name="alternateId3" type="hidden" value="0" size="60"/> </tr> <tr> <input name="ssn" type="hidden" value="0" size="60"/> </tr> <tr> <input name="license" type="hidden" value="0" size="60"/> </tr> <tr> <input name="comments" type="hidden" value="0" size="60"/> </tr> <tr> <input name="clientDrive" type="hidden" value="0" size="60"/> </tr> <tr> <input name="nickname" type="hidden" value="0" size="60"/> </tr> <tr> <input name="photoIcon" type="hidden" value="0" size="60"/> </tr> <tr> <input name="cellPhone" type="hidden" value="0" size="60"/> </tr> <tr> <input name="blogUniformResourceLocator" type="hidden" value="0" size="60"/> </tr> <tr> <input name="userResume" type="hidden" value="0" size="60"/> </tr> <tr> <input name="resumeAttach" type="hidden" value="0" size="60"/> </tr> <tr> <input name="education" type="hidden" value="0" size="60"/> </tr> <tr> <input name="experience" type="hidden" value="0" size="60"/> </tr> <tr> <input name="reflections" type="hidden" value="0" size="60"/> </tr> <tr> <input name="storeFrontID" type="hidden" value="0" size="60"/> </tr>  <tr> <input name="siteadministrator" type="hidden" value="0" size="60" /> </tr> <tr> <input name="instructor" type="hidden" value="0" size="60" /> </tr> <tr> <input name="student" type="hidden" value="1" size="60" /> </tr> <tr> <input name="supervisor" type="hidden" value="0" size="60"/> </tr>  </tr> <tr> <th scope="row" align="left">firstName:</th> <td><input name="firstName" type="text" size="60" id="firstName"/></td> </tr> <tr> <th scope="row" align="left">lastName:</th> <td><input name="lastName" type="text" size="60"/></td> </tr> <tr> <th scope="row" align="left">userName:</th> <td><input name="userName" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">password:</th> <td><input name="password" type="password" size="60" /></td> </tr> <tr> <th scope="row" align="left">email:</th> <td><input name="email" type="text" size="60" /></td> </tr> <tr> </tr> <tr> <th scope="row" align="left">organization:</th> <td><input name="organization" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">jobTitle:</th> <td><input name="jobTitle" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">department:</th> <td><input name="department" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">location:</th> <td><input name="location" type="text" size="60" /></td> </tr> <th scope="row" align="left">phone:</th> <td><input name="phone" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">fax:</th> <td><input name="fax" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">address:</th> <td><input name="address" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">address2:</th> <td><input name="address2" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">city:</th> <td><input name="city" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">state:</th> <td><input name="state" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">country:</th> <td><input name="country" type="text" size="60" /></td> </tr> <tr> <th scope="row" align="left">zip:</th> <td><input name="zip" type="text" size="60" /></td> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> </tr> <tr> <input name="languagePreference" type="hidden" value="1" size="60" /> </tr> <tr> <input name="active" type="hidden" value="1" size="60" /> </tr> <tr> <th scope="row" align="left"></th> <td><input name="Invoke" type="submit" value="Invoke" /></td> </tr> </table> </form> </body> </html>

Read the article

LWJGL - Eclipse error [on hold]

- by Zarkopafilis

When I try to run my lwjgl project, an error pops . Here is the log file: # A fatal error has been detected by the Java Runtime Environment: # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x6d8fcc0a, pid=5612, tid=900 # JRE version: 6.0_16-b01 Java VM: Java HotSpot(TM) Client VM (14.2-b01 mixed mode windows-x86 ) Problematic frame: V [jvm.dll+0xfcc0a] # If you would like to submit a bug report, please visit: http://java.sun.com/webapps/bugreport/crash.jsp # --------------- T H R E A D --------------- Current thread (0x016b9000): JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] siginfo: ExceptionCode=0xc0000005, reading address 0x00000000 Registers: EAX=0x00000000, EBX=0x00000000, ECX=0x00000006, EDX=0x00000000 ESP=0x001af4d4, EBP=0x001af524, ESI=0x016b9000, EDI=0x016b9110 EIP=0x6d8fcc0a, EFLAGS=0x00010246 Top of Stack: (sp=0x001af4d4) 0x001af4d4: 6da44bd8 016b9110 00000000 001af668 0x001af4e4: ffffffff 22200000 001af620 76ec39c2 0x001af4f4: 001af524 6d801086 0000000b 001afd34 0x001af504: 016b9000 016dd990 016b9000 00000000 0x001af514: 001af5f4 6d9ee000 6d9ef2f0 ffffffff 0x001af524: 001af58c 10008c85 016b9110 00000000 0x001af534: 00000000 000a0554 00000000 00000024 0x001af544: 00000000 00000000 001af6ac 00000000 Instructions: (pc=0x6d8fcc0a) 0x6d8fcbfa: e8 e8 d0 1d 08 00 8b 45 10 c7 45 d8 0b 00 00 00 0x6d8fcc0a: 8b 00 8b 48 08 0f b7 51 26 8b 40 0c 8b 4c 90 20 Stack: [0x00160000,0x001b0000], sp=0x001af4d4, free space=317k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) V [jvm.dll+0xfcc0a] C [lwjgl.dll+0x8c85] C [USER32.dll+0x18876] C [USER32.dll+0x170f4] C [USER32.dll+0x1119e] C [ntdll.dll+0x460ce] C [USER32.dll+0x10e29] C [USER32.dll+0x10e84] C [lwjgl.dll+0x1cf0] j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub V [jvm.dll+0xecf9c] V [jvm.dll+0x1741e1] V [jvm.dll+0xed01d] V [jvm.dll+0xf5be5] V [jvm.dll+0xfd83d] C [javaw.exe+0x2155] C [javaw.exe+0x833e] C [kernel32.dll+0x51154] C [ntdll.dll+0x5b2b9] C [ntdll.dll+0x5b28c] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j org.lwjgl.opengl.WindowsDisplay.nCreateWindow(IIIIZZJ)J+0 j org.lwjgl.opengl.WindowsDisplay.createWindow(Lorg/lwjgl/opengl/DrawableLWJGL;Lorg/lwjgl/opengl/DisplayMode;Ljava/awt/Canvas;II)V+102 j org.lwjgl.opengl.Display.createWindow()V+71 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;Lorg/lwjgl/opengl/Drawable;Lorg/lwjgl/opengl/ContextAttribs;)V+72 j org.lwjgl.opengl.Display.create(Lorg/lwjgl/opengl/PixelFormat;)V+12 j org.lwjgl.opengl.Display.create()V+7 j zarkopafilis.koding.io.javafx.Main.main([Ljava/lang/String;)V+16 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( = current thread ) 0x0179a400 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4460, stack(0x0b900000,0x0b950000)] 0x01795400 JavaThread "CompilerThread0" daemon [_thread_blocked, id=5264, stack(0x0b8b0000,0x0b900000)] 0x01790c00 JavaThread "Attach Listener" daemon [_thread_blocked, id=6080, stack(0x0b860000,0x0b8b0000)] 0x01786400 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=1204, stack(0x0b810000,0x0b860000)] 0x01759c00 JavaThread "Finalizer" daemon [_thread_blocked, id=5772, stack(0x0b7c0000,0x0b810000)] 0x01755000 JavaThread "Reference Handler" daemon [_thread_blocked, id=4696, stack(0x01640000,0x01690000)] =0x016b9000 JavaThread "main" [_thread_in_vm, id=900, stack(0x00160000,0x001b0000)] Other Threads: 0x01751c00 VMThread [stack: 0x015f0000,0x01640000] [id=4052] 0x0179c800 WatcherThread [stack: 0x0b950000,0x0b9a0000] [id=3340] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 960K, used 816K [0x037c0000, 0x038c0000, 0x03ca0000) eden space 896K, 91% used [0x037c0000, 0x0388c2c0, 0x038a0000) from space 64K, 0% used [0x038a0000, 0x038a0000, 0x038b0000) to space 64K, 0% used [0x038b0000, 0x038b0000, 0x038c0000) tenured generation total 4096K, used 0K [0x03ca0000, 0x040a0000, 0x077c0000) the space 4096K, 0% used [0x03ca0000, 0x03ca0000, 0x03ca0200, 0x040a0000) compacting perm gen total 12288K, used 2143K [0x077c0000, 0x083c0000, 0x0b7c0000) the space 12288K, 17% used [0x077c0000, 0x079d7e38, 0x079d8000, 0x083c0000) No shared spaces configured. Dynamic libraries: 0x00400000 - 0x00424000 C:\Program Files\Java\jre6\bin\javaw.exe 0x77550000 - 0x7768e000 C:\Windows\SYSTEM32\ntdll.dll 0x75a80000 - 0x75b54000 C:\Windows\system32\kernel32.dll 0x758d0000 - 0x7591b000 C:\Windows\system32\KERNELBASE.dll 0x759e0000 - 0x75a80000 C:\Windows\system32\ADVAPI32.dll 0x76070000 - 0x7611c000 C:\Windows\system32\msvcrt.dll 0x77250000 - 0x77269000 C:\Windows\SYSTEM32\sechost.dll 0x771a0000 - 0x77241000 C:\Windows\system32\RPCRT4.dll 0x76eb0000 - 0x76f79000 C:\Windows\system32\USER32.dll 0x76e60000 - 0x76eae000 C:\Windows\system32\GDI32.dll 0x77770000 - 0x7777a000 C:\Windows\system32\LPK.dll 0x75fd0000 - 0x7606e000 C:\Windows\system32\USP10.dll 0x770b0000 - 0x770cf000 C:\Windows\system32\IMM32.DLL 0x770d0000 - 0x7719c000 C:\Windows\system32\MSCTF.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da8b000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x73a00000 - 0x73a32000 C:\Windows\system32\WINMM.dll 0x75610000 - 0x7565b000 C:\Windows\system32\apphelp.dll 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x776e0000 - 0x776e5000 C:\Windows\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x10000000 - 0x1004c000 C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows\lwjgl.dll 0x5d170000 - 0x5d238000 C:\Windows\system32\OPENGL32.dll 0x6e7b0000 - 0x6e7d2000 C:\Windows\system32\GLU32.dll 0x70620000 - 0x70707000 C:\Windows\system32\DDRAW.dll 0x70610000 - 0x70616000 C:\Windows\system32\DCIMAN32.dll 0x75b60000 - 0x75cfd000 C:\Windows\system32\SETUPAPI.dll 0x759b0000 - 0x759d7000 C:\Windows\system32\CFGMGR32.dll 0x76d70000 - 0x76dff000 C:\Windows\system32\OLEAUT32.dll 0x75db0000 - 0x75f0c000 C:\Windows\system32\ole32.dll 0x758b0000 - 0x758c2000 C:\Windows\system32\DEVOBJ.dll 0x74060000 - 0x74073000 C:\Windows\system32\dwmapi.dll 0x74b60000 - 0x74b69000 C:\Windows\system32\VERSION.dll 0x745f0000 - 0x7478e000 C:\Windows\WinSxS\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.7600.16661_none_420fe3fa2b8113bd\COMCTL32.dll 0x75d50000 - 0x75da7000 C:\Windows\system32\SHLWAPI.dll 0x74370000 - 0x743b0000 C:\Windows\system32\uxtheme.dll 0x22200000 - 0x22206000 C:\Program Files\ESET\ESET Smart Security\eplgHooks.dll VM Arguments: jvm_args: -Djava.library.path=C:\Users\theo\Desktop\workspace\JavaFX1\lib\natives\windows -Dfile.encoding=Cp1253 java_command: zarkopafilis.koding.io.javafx.Main Launcher Type: SUN_STANDARD Environment Variables: PATH=C:/Program Files/Java/jre6/bin/client;C:/Program Files/Java/jre6/bin;C:/Program Files/Java/jre6/lib/i386;C:\Perl\site\bin;C:\Perl\bin;C:\Ruby200\bin;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Windows Live\Shared;C:\Users\theo\Desktop\eclipse; USERNAME=theo OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 5, GenuineIntel --------------- S Y S T E M --------------- OS: Windows 7 Build 7600 CPU:total 4 (8 cores per cpu, 2 threads per core) family 6 model 37 stepping 5, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3, sse4.1, sse4.2, ht Memory: 4k page, physical 2097151k(1257972k free), swap 4194303k(4194303k free) vm_info: Java HotSpot(TM) Client VM (14.2-b01) for windows-x86 JRE (1.6.0_16-b01), built on Jul 31 2009 11:26:58 by "java_re" with MS VC++ 7.1 time: Wed Oct 23 22:00:12 2013 elapsed time: 0 seconds Code: Display.setDisplayMode(new DisplayMode(800,600)); Display.create();//Error here I am using JDK 6

Read the article

WPF Databinding- Not your fathers databinding Part 1-3

- by Shervin Shakibi

As Promised here is my advanced databinding presentation from South Florida Code camp and also Orlando Code camp. you can find the demo files here. http://ssccinc.com/wpfdatabinding.zip Here is a quick description of the first demos, there will be 2 other Blogposting in the next few days getting into more advance databinding topics. Example00 Here we have 3 textboxes, The first textbox mySourceElement Second textbox has a binding to mySourceElement and Path= Text <Binding ElementName="mySourceElement" Path="Text" /> Third textbox is also bound to the Text property but we use inline Binding <TextBlock Text="{Binding ElementName=mySourceElement,Path=Text }" Grid.Row="2" /> Here is the entire XAML <Grid > <Grid.RowDefinitions > <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <TextBox Name="mySourceElement" Grid.Row="0" TextChanged="mySourceElement_TextChanged">Hello Orlnado</TextBox> <TextBlock Grid.Row="1"> <TextBlock.Text> <Binding ElementName="mySourceElement" Path="Text" /> </TextBlock.Text> </TextBlock> <TextBlock Text="{Binding ElementName=mySourceElement,Path=Text }" Grid.Row="2" /> </Grid> </Window> Example01 we have a slider control, then we have two textboxes bound to the value property of the slider. one has its text property bound, the second has its fontsize property bound. <Grid> <Grid.RowDefinitions > <RowDefinition Height="40px" /> <RowDefinition Height="40px" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Slider Name="fontSizeSlider" Minimum="5" Maximum="100" Value="10" Grid.Row="0" /> <TextBox Name="SizeTextBox" Text="{Binding ElementName=fontSizeSlider, Path=Value}" Grid.Row="1"/> <TextBlock Text="Example 01" FontSize="{Binding ElementName=SizeTextBox, Path=Text}" Grid.Row="2"/> </Grid> Example02 very much like the previous example but it also has a font dropdown <Grid> <Grid.RowDefinitions > <RowDefinition Height="20px" /> <RowDefinition Height="40px" /> <RowDefinition Height="40px" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <ComboBox Name="FontNameList" SelectedIndex="0" Grid.Row="0"> <ComboBoxItem Content="Arial" /> <ComboBoxItem Content="Calibri" /> <ComboBoxItem Content="Times New Roman" /> <ComboBoxItem Content="Verdana" /> </ComboBox> <Slider Name="fontSizeSlider" Minimum="5" Maximum="100" Value="10" Grid.Row="1" /> <TextBox Name="SizeTextBox" Text="{Binding ElementName=fontSizeSlider, Path=Value}" Grid.Row="2"/> <TextBlock Text="Example 01" FontFamily="{Binding ElementName=FontNameList, Path=Text}" FontSize="{Binding ElementName=SizeTextBox, Path=Text}" Grid.Row="3"/> </Grid> Example03 In this example we bind to an object Employee.cs Notice we added a directive to our xaml which is clr-namespace and the namespace for our employee Class xmlns:local="clr-namespace:Example03" In Our windows Resources we create an instance of our object <Window.Resources> <local:Employee x:Key="MyEmployee" EmployeeNumber="145" FirstName="John" LastName="Doe" Department="Product Development" Title="QA Manager" /> </Window.Resources> then we bind our container to the that instance of the data <Grid DataContext="{StaticResource MyEmployee}"> <Grid.RowDefinitions> <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <Grid.ColumnDefinitions > <ColumnDefinition Width="130px" /> <ColumnDefinition Width="178*" /> </Grid.ColumnDefinitions> </Grid> and Finally we have textboxes that will bind to that textbox <Label Grid.Row="0" Grid.Column="0">Employee Number</Label> <TextBox Grid.Row="0" Grid.Column="1" Text="{Binding Path=EmployeeNumber}"></TextBox> <Label Grid.Row="1" Grid.Column="0">First Name</Label> <TextBox Grid.Row="1" Grid.Column="1" Text="{Binding Path=FirstName}"></TextBox> <Label Grid.Row="2" Grid.Column="0">Last Name</Label> <TextBox Grid.Row="2" Grid.Column="1" Text="{Binding Path=LastName}" /> <Label Grid.Row="3" Grid.Column="0">Title</Label> <TextBox Grid.Row="3" Grid.Column="1" Text="{Binding Path=Title}"></TextBox> <Label Grid.Row="4" Grid.Column="0">Department</Label> <TextBox Grid.Row="4" Grid.Column="1" Text="{Binding Path=Department}" />

Read the article

Building a database installer with WiX, datadude and Visual Studio 2010

- by jamiet

Today I have been using Windows Installer XML (WiX) to build an installer (.msi file) that would install a SQL Server database on a server of my choosing; the source code for that database lives in datadude (a tool which you may know by one of quite a few other names). The basis for this work was a most excellent blog post by Duke Kamstra entitled Implementing a WIX installer that calls the GDR version of VSDBCMD.EXE which coves the delicate intricacies of doing this – particularly how to call Vsdbcmd.exe in a CustomAction. Unfortunately there are a couple of things wrong with Duke’s post: Searching for “datadude wix” didn’t turn it up in the first page of search results and hence it took me a long time to find it. And I knew that it existed. If someone else were after a post on using WiX with datadude its likely that they would never have come across Duke’s post and that would be a great shame because its the definitive post on the matter. It was written in October 2009 and had not been updated for Visual Studio 2010. Well, this blog post is an attempt to solve those problems. Hopefully I’ve solved the first one just by following a few of my blogging SEO tips while writing this blog post, in the rest of it I will explain how I took Duke’s code and updated it to work in Visual Studio 2010. If you need to build a database installer using WiX, datadude and Visual Studio 2010 then you still need to follow Duke’s blog post so go and do that now. Below are the amendments that I made that enabled the project to get built in Visual Studio 2010: In VS2010 datadude’s output files have changed from being called Database.<suffix> to <ProjectName>_Database.<suffix>. Duke’s code was referencing the old file name formats. Duke used $(var.SolutionDir) and relative paths to point to datadude artefacts I have replaced these with Votive Project References http://wix.sourceforge.net/manual-wix3/votive_project_references.htm I commented out all references to MicrosoftSqlTypesDbschema in DatabaseArtifacts.wxi. I don't think this is produced in VS2010 (I may be wrong about that but it wasn't in the output from my project) Similarly I commented out component MicrosoftSqlTypesDbschema in VsdbcmdArtifacts.wxi. It wasn't where Duke's code said it should have been so am assuming/hoping it isn't needed. Duke's ?define block to work out appropriate SrcArchPath actually wasn't working for me (i.e. <?if $(var.Platform)=x64 ?> was evaluating to false) so I just took out the conditional stuff and declared the path explicitly to the “Program Files (x86)” path. The old code is still there though if you need to put it back. None of the <RegistrySearch> stuff is needed for VS2010 - so I commented it all out! Changed to use /manifest option rather than /model option on vsdbcmd.exe command-line. Personal preference is all! Added a new component in order to bundle along the vsdbcmd.exe.config file Made the install of the Custom Action dependent on the relevant feature being selected for install. This one is actually really important – deselecting the database feature for installation does not, by default, stop the CustomAction from executing and so would cause an error - so that scenario needs to be catered for I have made my amended solution available for download at: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.zip It contains two projects: the WiX project and the datadude project that is the source to be deployed (for demo purposes it only contains one table). I have also made the .msi available although in order that it gets through file blockers I changed the name from InstallMyDatabase.msi to InstallMyDatabase.ms_ – simply rename the file back once you have downloaded it from: http://cid-550f681dad532637.office.live.com/self.aspx/Public/BlogShare/20110210/InstallMyDatabase.ms%5E_ .You can try it out for yourself – the only thing it does is dump the files into %Program Files%\MyDatabase and uses them to install a database onto a server of your choosing with a name of your choosing - no damaging side-affects. I will caveat this by saying “it works on my machine” and, not having access to a plethora of different machines, I haven’t tested it anywhere else. One potential issue that I know of is that Vsdbcmd.exe has a dependency on SQL Server CE although if you have SQL Server tools or Visual Studio installed you should be fine. Unfortunately its not possible to bundle along the SQL Server CE installer in the .msi because Windows will not allow you to call one installer from inside another – the recommended way to get around this problem is to build a bootstrapper to bundle the whole lot together but doing that is outside the scope of this blog post. If you discover any other issues then please let me know. Here are the screenshots from the installer: And once installed…. Hope this is useful! @jamiet

Read the article

Creating an ASP.NET report using Visual Studio 2010 - Part 3

- by rajbk

We continue building our report in this three part series. Creating an ASP.NET report using Visual Studio 2010 - Part 1 Creating an ASP.NET report using Visual Studio 2010 - Part 2 Adding the ReportViewer control and filter drop downs. Open the source code for index.aspx and add a ScriptManager control. This control is required for the ReportViewer control. Add a DropDownList for the categories and suppliers. Add the ReportViewer control. The markup after these steps is shown below. <div> <asp:ScriptManager ID="smScriptManager" runat="server"> </asp:ScriptManager> <div id="searchFilter"> Filter by: Category : <asp:DropDownList ID="ddlCategories" runat="server" /> and Supplier : <asp:DropDownList ID="ddlSuppliers" runat="server" /> </div> <rsweb:ReportViewer ID="rvProducts" runat="server"> </rsweb:ReportViewer> </div> The design view for index.aspx is shown below. The dropdowns will display the categories and suppliers in the database. Changing the selection in the drop downs will cause the report to be filtered by the selections in the dropdowns. You will see how to do this in the next steps. Attaching the RDLC to the ReportViewer control by clicking on the top right of the control, going to Report Viewer tasks and selecting Products.rdlc. Resize the ReportViewer control by dragging at the bottom right corner. I set mine to 800px x 500px. You can also set this value in source view. Defining the data sources. We will now define the Data Source used to populate the report. Go back to the “ReportViewer Tasks” and select “Choose Data Sources” Select a “New data source..” Select “Object” and name your Data Source ID “odsProducts” In the next screen, choose “ProductRepository” as your business object. Choose “GetProductsProjected” in the next screen. The method requires a SupplierID and CategoryID. We will set these so that our data source gets the values from the drop down lists we defined earlier. Set the parameter source to be of type “Control” and set the ControlIDs to be ddlSuppliers and ddlCategories respectively. Your screen will look like this: We are now going to define the data source for our drop downs. Select the ddlCategory drop down and pick “Choose Data Source”. Pick “Object” and give it an id “odsCategories” In the next screen, choose “ProductRepository” Select the GetCategories() method in the next screen. Select “CategoryName” and “CategoryID” in the next screen. We are done defining the data source for the Category drop down. Perform the same steps for the Suppliers drop down. Select each dropdown and set the AppendDataBoundItems to true and AutoPostback to true. The AppendDataBoundItems is needed because we are going to insert an “All“ list item with a value of empty. Go to each drop down and add this list item markup as shown below> Finally, double click on each drop down in the designer and add the following code in the code behind. This along with the “Autopostback= true” attribute refreshes the report anytime a drop down is changed. protected void ddlCategories_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); } protected void ddlSuppliers_SelectedIndexChanged(object sender, EventArgs e) { rvProducts.LocalReport.Refresh(); } Compile your report and run the page. You should see the report rendered. Note that the tool bar in the ReportViewer control gives you a couple of options including the ability to export the data to Excel, PDF or word. Conclusion Through this three part series, we did the following: Created a data layer for use by our RDLC. Created an RDLC using the report wizard and define a dataset for the report. Used the report design surface to design our report including adding a chart. Used the ReportViewer control to attach the RDLC. Connected our ReportWiewer to a data source and take parameter values from the drop downlists. Used AutoPostBack to refresh the reports when the dropdown selection was changed. RDLCs allow you to create interactive reports including drill downs and grouping. For even more advanced reports you can use Microsoft® SQL Server™ Reporting Services with RDLs. With RDLs, the report is rendered on the report server instead of the web server. Another nice thing about RDLs is that you can define a parameter list for the report and it gets rendered automatically for you. RDLCs and RDLs both have their advantages and its best to compare them and choose the right one for your requirements. Download VS2010 RTM Sample project NorthwindReports.zip Alfred Borden: Are you watching closely?

Read the article

Searching for tasks with code – Executables and Event Handlers

Searching packages or just enumerating through all tasks is not quite as straightforward as it may first appear, mainly because of the way you can nest tasks within other containers. You can see this illustrated in the sample package below where I have used several sequence containers and loops. To complicate this further all containers types, including packages and tasks, can have event handlers which can then support the full range of nested containers again. Towards the lower right, the task called SQL In FEL also has an event handler not shown, within which is another Execute SQL Task, so that makes a total of 6 Execute SQL Tasks 6 tasks spread across the package. In my previous post about such as adding a property expressionI kept it simple and just looked at tasks at the package level, but what if you wanted to find any or all tasks in a package? For this post I've written a console program that will search a package looking at all tasks no matter how deeply nested, and check to see if the name starts with "SQL". When it finds a matching task it writes out the hierarchy by name for that task, starting with the package and working down to the task itself. The output for our sample package is shown below, note it has found all 6 tasks, including the one on the OnPreExecute event of the SQL In FEL task TaskSearch v1.0.0.0 (1.0.0.0) Copyright (C) 2009 Konesans Ltd Processing File - C:\Projects\Alpha\Packages\MyPackage.dtsx MyPackage\FOR Counter Loop\SQL In Counter Loop MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL\OnPreExecute\SQL On Pre Execute for FEL SQL Task MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SEQ Nested Lvl 2\SQL In Nested Lvl 2 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #1 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #2 6 matching tasks found in package. The full project and code is available for download below, but first we can walk through the project to highlight the most important sections of code. This code has been abbreviated for this description, but is complete in the download. First of all we load the package, and then start by looking at the Executables for the package. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { int matchCount = 0; // Look in the package's executables ProcessExecutables(package.Executables, ref matchCount); ... // // ... // Write out final count Console.WriteLine("{0} matching tasks found in package.", matchCount); } The ProcessExecutables method is a key method, as an executable could be described as the the highest level of a working functionality or container. There are several of types of executables, such as tasks, or sequence containers and loops. To know what to do next we need to work out what type of executable we are dealing with as the abbreviated version of method shows below. private static void ProcessExecutables(Executables executables, ref int matchCount) { foreach (Executable executable in executables) { TaskHost taskHost = executable as TaskHost; if (taskHost != null) { ProcessTaskHost(taskHost, ref matchCount); ProcessEventHandlers(taskHost.EventHandlers, ref matchCount); continue; } ... // // ... ForEachLoop forEachLoop = executable as ForEachLoop; if (forEachLoop != null) { ProcessExecutables(forEachLoop.Executables, ref matchCount); ProcessEventHandlers(forEachLoop.EventHandlers, ref matchCount); continue; } } } As you can see if the executable we find is a task we then call out to our ProcessTaskHost method. As with all of our executables a task can have event handlers which themselves contain more executables such as task and loops, so we also make a call out our ProcessEventHandlers method. The other types of executables such as loops can also have event handlers as well as executables. As shown with the example for the ForEachLoop we call the same ProcessExecutables and ProcessEventHandlers methods again to drill down into the hierarchy of objects that the package may contain. This code needs to explicitly check for each type of executable (TaskHost, Sequence, ForLoop and ForEachLoop) because whilst they all have an Executables property this is not from a common base class or interface. This example was just a simple find a task by its name, so ProcessTaskHost really just does that. We also get the hierarchy of objects so we can write out for information, obviously you can adapt this method to do something more interesting such as adding a property expression. private static void ProcessTaskHost(TaskHost taskHost, ref int matchCount) { if (taskHost == null) { return; } // Check if the task matches our match name if (taskHost.Name.StartsWith(TaskNameFilter, StringComparison.OrdinalIgnoreCase)) { // Build up the full object hierarchy of the task // so we can write it out for information StringBuilder path = new StringBuilder(); DtsContainer container = taskHost; while (container != null) { path.Insert(0, container.Name); container = container.Parent; if (container != null) { path.Insert(0, "\\"); } } // Write the task path // e.g. Package\Container\Event\Task Console.WriteLine(path); Console.WriteLine(); // Increment match counter for info matchCount++; } } Just for completeness, the other processing method we covered above is for event handlers, but really that just calls back to the executables. This same method is called in our main package method, but it was omitted for brevity here. private static void ProcessEventHandlers(DtsEventHandlers eventHandlers, ref int matchCount) { foreach (DtsEventHandler eventHandler in eventHandlers) { ProcessExecutables(eventHandler.Executables, ref matchCount); } } As hopefully the code demonstrates, executables (Microsoft.SqlServer.Dts.Runtime.Executable) are the workers, but within them you can nest more executables (except for task tasks).Executables themselves can have event handlers which can in turn hold more executables. I have tried to illustrate this highlight the relationships in the following diagram. Download Sample code project TaskSearch.zip (11KB)

Read the article

Customizing the processing of ListItems for asp:RadioButtonList with "Flow" layout and "Horizontal"

- by evovision

Hi, recently I was asked to add an ability to pad specific elements from each other to a certain distance in RadioButtonList control. Not quite common everyday task I would say :) Ok, let's get started! Prerequisites: ASP.NET Page having RadioButtonList control with RepeatLayout="Flow" RepeatDirection="Horizontal" properties set. Implementation: The underlying data was coming from another source, so the only fast way to add meta information about padding was the text value itself (yes, not very optimal solution): Id = 1, Name = "This is first element" and for padding we agreed to use <space/> meta tag: Id = 2, Name = "<space padcount="30px"/>This is second padded element" To handle items rendering in RadioButtonList control I've created custom class and subclassed from it: public class CustomRadioButtonList : RadioButtonList { private Action<ListItem, HtmlTextWriter> _preProcess; protected override void RenderItem(ListItemType itemType, int repeatIndex, RepeatInfo repeatInfo, HtmlTextWriter writer) { if (_preProcess != null) { _preProcess(this.Items[repeatIndex], writer); } base.RenderItem(itemType, repeatIndex, repeatInfo, writer); } public void SetPrePrenderItemFunction(Action<ListItem, HtmlTextWriter> func) { _preProcess = func; } } It is pretty straightforward approach, the key is to override RenderItem method. Class has SetPrePrenderItemFunction method which is used to pass custom processing function that takes 2 parameters: ListItem and HtmlTextWriter objects. Now update existing RadioButtonList control in Default.aspx: add this to beginning of the page: <%@ Register Namespace="Sample.Controls" TagPrefix="uc1" %> and update the control to: <uc1:CustomRadioButtonList ID="customRbl" runat="server" DataValueField="Id" DataTextField="Name" RepeatLayout="Flow" RepeatDirection="Horizontal"></uc1:CustomRadioButtonList> Now, from codebehind of the page: Add regular expression that will be used for parsing: private Regex _regex = new Regex(@"(?:[<]space padcount\s*?=\s*?(?:'|"")(?<padcount>\d+)(?:(?:\s+)?px)?(?:'|"")\s*?/>)(?<content>.*)?", RegexOptions.IgnoreCase | RegexOptions.Compiled); and finally setup the processing function in Page_Load: protected void Page_Load(object sender, EventArgs e) { customRbl.DataSource = DataObjects; customRbl.SetPrePrenderItemFunction((listItem, writer) => { Match match = _regex.Match(listItem.Text); if (match.Success) { writer.Write(string.Format(@"<span style=""padding-left:{0}"">Extreme values: </span>", match.Groups["padcount"].Value + "px")); // if you need to pad listitem use code below //x.Attributes.CssStyle.Add("padding-left", match.Groups["padcount"].Value + "px"); // remove meta tag from text listItem.Text = match.Groups["content"].Value; } }); customRbl.DataBind(); } That's it! :) Run the attached sample application: P.S.: of course several other approaches could have been used for that purpose including events and the functionality for processing could also be embedded inside control itself. Current solution suits slightly better due some other reasons for situation where it was used, in your case consider this as a kick start for your own implementation :) Source application: CustomRadioButtonList.zip

Read the article

CodePlex Daily Summary for Sunday, March 07, 2010

CodePlex Daily Summary for Sunday, March 07, 2010New ProjectsAlgorithminator: Universal .NET algorithm visualizer, which helps you to illustrate any algorithm, written in any .NET language. Still in development.ALToolkit: Contains a set of handy .NET components/classes. Currently it contains: * A Numeric Text Box (an Extended NumericUpDown) * A Splash Screen base fo...Automaton Home: Automaton is a home automation software built with a n-Tier, MVVM pattern utilzing WCF, EF, WPF, Silverlight and XBAP.Developer Controls: Developer Controls contains various controls to help build applications that can script/write code.Dynamic Reference Manager: Dynamic Reference Manager is a set (more like a small group) of classes and attributes written in C# that allows any .NET program to reference othe...indiologic: Utilities of an IndioNeural Cryptography in F#: This project is my magistracy resulting work. It is intended to be an example of using neural networks in cryptography. Hashing functions are chose...Particle Filter Visualization: Particle Filter Visualization Program for the Intel Science and Engineering FairPólya: Efficient, immutable, polymorphic collections. .Net lacks them, we provide them*. * By we, we mean I; and by efficient, I mean hopefully so.project euler solutions from mhinze: mhinze project euler solutionsSilverlight 4 and WCF multi layer: Silverlight 4 and WCF multi layersqwarea: Project for a browser-based, minimalistic, massively multiplayer strategy game. Part of the "Génie logiciel et Cloud Computing" course of the ENS (...SuperSocket: SuperSocket, a socket application framework can build FTP/SMTP/POP server easilyToast (for ASP.NET MVC): Dynamic, developer & designer friendly content injection, compression and optimization for ASP.NET MVCNew ReleasesALToolkit: ALToolkit 1.0: Binary release of the libraries containing: NumericTextBox SplashScreen Based on the VB.NET code, but that doesn't really matter.Blacklist of Providers: 1.0-Milestone 1: Blacklist of Providers.Milestone 1In this development release implemented - Main interface (Work Item #5453) - Database (Work Item #5523)C# Linear Hash Table: Linear Hash Table b2: Now includes a default constructor, and will throw an exception if capacity is not set to a power of 2 or loadToMaintain is below 1.Composure: CassiniDev-Trunk-40745-VS2010.rc1.NET4: A simple port of the CassiniDev portable web server project for Visual Studio 2010 RC1 built against .NET 4.0. The WCF tests currently fail unless...Developer Controls: DevControls: These are the version 1.0 releases of these controls. Download the individually or all together (in a .zip file). More releases coming soon!Dynamic Reference Manager: DRM Alpha1: This is the first release. I'm calling it Alpha because I intend implementing other functions, but I do not intend changing the way current functio...ESB Toolkit Extensions: Tellago SOA ESB Extenstions v0.3: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...GKO Libraries: GKO Libraries 0.1 Alpha: 0.1 AlphaHome Access Plus+: v3.0.3.0: Version 3.0.3.0 Release Change Log: Added Announcement Box Removed script files that aren't needed Fixed & issue in directory path Stylesheet...Icarus Scene Engine: Icarus Scene Engine 1.10.306.840: Icarus Professional, Icarus Player, the supporting software for Icarus Scene Engine, with some included samples, and the start of a tutorial (with ...mavjuz WndLpt: wndlpt-0.2.5: New: Response to 5 LPT inputs "test i 1" New: Reaction to 12 LPT outputs "test q 8" New: Reaction to all LPT pins "test pin 15" New: Syntax: ...Neural Cryptography in F#: Neural Cryptography 0.0.1: The most simple version of this project. It has a neural network that works just like logical AND and a possibility to recreate neural network from...Password Provider: 1.0.3: This release fixes a bug which caused the program to crash when double clicking on a generic item.RoTwee: RoTwee 6.2.0.0: New feature is as next. 16649 Add hashtag for tweet of tune.Now you can tweet your playing tune with hashtag.Visual Studio DSite: Picture Viewer (Visual C++ 2008): This example source code allows you to view any picture you want in the click of a button. All you got to do is click the button and browser via th...WatchersNET CKEditor™ Provider for DotNetNuke: CKEditor Provider 1.8.00: Whats New File Browser: Folders & Files View reworked File Browser: Folders & Files View reworked File Browser: Folders are displayed as TreeVi...WSDLGenerator: WSDLGenerator 0.0.0.4: - replaced CommonLibrary.dll by CommandLineParser.dll - added better support for custom complex typesMost Popular ProjectsMetaSharpSilverlight ToolkitASP.NET Ajax LibraryAll-In-One Code FrameworkWindows 7 USB/DVD Download Toolニコ生アラートWindows Double ExplorerVirtual Router - Wifi Hot Spot for Windows 7 / 2008 R2Caliburn: An Application Framework for WPF and SilverlightArkSwitchMost Active ProjectsUmbraco CMSRawrSDS: Scientific DataSet library and toolsBlogEngine.NETjQuery Library for SharePoint Web Servicespatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterFarseer Physics EngineFasterflect - A Fast and Simple Reflection APIFluent Assertions

Read the article

ComboBox Control using silverlight

- by Aamir Hasan

DropDown.zip (135.33 kb) LiveDemo Introduction In this article i am going to explore some of the features of the ComboBox.ComboBox makes the collection visible and allows users to pick an item from the collection.After its first initialization, no matter if you bind a new datasource with fewer or more elements, the dropdown persists its original height.One workaround is the following:1. store the Properties from the original ComboBox2. delete the ComboBox removing it from its container3. create a new ComboBox and place it in the container4. recover the stores Properties5. bind the new DataSource to the newly created combobox Creating Silverlight ProjectCreate a new Silverlight 3 Project in VS 2008. Name it as ComboBoxtSample. Simple Data BindingAdd System.Windows.Control.Data reference to the Silverlight project. Silverlight UserControl Add a new page to display Bus data using DataGrid. Following shows Bus column XAML snippet:The ComboBox element represents a ComboBox control in XAML. <ComboBox></ComboBox>ComboBox XAML <StackPanel Orientation="Vertical"> <ComboBox Width="120" Height="30" x:Name="DaysDropDownList" DisplayMemberPath="Name">  </ComboBox> </StackPanel> The following code below is an example implementation Combobox control support data binding 1 By setting the DisplayMemberPath property you can specify which data item in your data you want displayed in the ComboBox. 2 Setting the SelectedIndex allows you to specify which item in the ComboBox you want selected. Business Object public class Bus { public string Name { get; set; } public float Price { get; set; } } Data Binding private List populatedlistBus() { listBus = new List(); listBus.Add(new Bus() {Name = "Bus 1", Price = 55f }); listBus.Add(new Bus() { Name = "Bus 2", Price = 55.7f }); listBus.Add(new Bus() { Name = "Bus 3", Price = 2f }); listBus.Add(new Bus() { Name = "Bus 4", Price = 6f }); listBus.Add(new Bus() { Name = "Bus 5", Price = 9F }); listBus.Add(new Bus() { Name = "Bus 6", Price = 10.1f }); return listBus; } The following line of code sets the ItemsSource property of a ComboBox. DaysDropDownList.ItemsSource = populatedlistBus(); Output I hope you enjoyed this simple Silverlight example Conclusion In this article, we saw how data binding works in ComboBox.You learnt how to work with the ComboBox control in Silverlight.

Read the article

Taking advantage of Windows Azure CDN and Dynamic Pages in ASP.NET - Caching content from hosted services

- by Shawn Cicoria

With the updates to Windows Azure CDN announced this week [1] I wanted to help illustrate the capability with a working sample that will serve up dynamic content from an ASP.NET site hosted in a WebRole. First, to get a good overview of the capability you can read the Overview of the Windows Azure CDN [2] content on MSDN. When you setup the ability to cache content from a hosted service, the requirement is to provide a path to your role’s DNS endpoint that ends in the path “/cdn”. Additionally, you then map CDN to that service. What WAZ CDN does, is allow you to then map that through the CDN to your host. The CDN will then make a request to your host on your client’s behalf. The requirement is still that your client, and any Url’s that are to be serviced through the CDN and this capability have to use the CDN DNS name and not your host – no different than what CDN does for Blog storage. The following 2 URL’s are samples of how the client needs to issue the requests. Windows Azure hosted service URL: http: //myHostedService.cloudapp.net/cdn/music.aspx - for regular “dynamic” content Windows Azure CDN URL: http: //<identifier>.vo.msecnd.net/music.aspx - for CDN “cachable” content. The first URL path’s the request direct to your host into the Azure datacenter. The 2nd URL paths the request through the CDN infrastructure, where CDN will make the determination to request the content on behalf of the client to the Azure datacenter and your host on the /cdn path. The big advantage here is you can apply logic to your content creation. What’s important is emitting the CDN friendly headers that allow CDN to request and re-request only when you designate based upon it’s rules of “staleness” as described in the overview page. With IIS7.5 there is an underlying issue when the Managed Module “OutputCache” is enabled that in order to emit a good header for your content, you’ll need to remove, and in my sample, helps provide CDN friendly headers. You get IIS 7.5 when running under OS Family “2” in your service configuration. By default, and when the OutputCache managed module is loaded, if you use the HttpResponse.CachePolicy to set the Http Headers for “max-age” when the HttpCacheability is “Public”, you will NOT get the “max-age” emitted as part of the “Cache-control:” header. Instead, the OutputCache module will remove “max-age” and just emit “public”. It works ok when Cacheability is set to “private”. To work around the issue and ensure your code as follows emits the full max-age along with the public option, you need to remove as follows: <system.webServer> <modules runAllManagedModulesForAllRequests="true"> <remove name="OutputCache"/> </modules> </system.webServer> Response.Cache.SetCacheability(HttpCacheability.Public); Response.Cache.SetMaxAge(TimeSpan.FromMinutes(rv)); In the attached solution, the way I approached it was to have a VirtualApplication under the root site that has it’s own web.config - this VirtualApplication is the /cdn of the site and when deployed to Azure as a Web Role will surface as a distinct IIS Application – along with a separate AppDomain. The CDN Sample is a simple Web Forms site that the /default landing page contains 3 IFrames to host: 1. Content direct from the host @ http://xxxx.cloudapp.net/cdn 2. Content via the CDN @ http://azxxx.vo.msecnd.net 3. Simple list of recent requests – showing where the request came from. When you run the sample the first time you hit the page, both the Host and the CDN will cause 2 initial requests to hit the host. You won’t see the first requests in the list because of timing – but if you refresh, you’ll see that the list will show that you have 2 requests initially. 1. sourced direct from the Browser to the HOST 2. sourced via the CDN The picture above shows the call-outs of each of those requests – green rows showing requests coming direct to the HOST, yellow showing the CDN request. The IP addresses of the green items are direct from the client, where the CDN is from the CDN data center. As you refresh the page (hit Ctrl+F5 to force a full refresh and avoid “304 – not changed”) you’ll see that the request to the HOST get’s processed direct; but the request to the CDN endpoint is serviced direct from the CDN and doesn’t incur any additional request back to the HOST. The following is the Headers from the CDN response (Status-Line) HTTP/1.1 200 OK Age 13 Cache-Control public, max-age=300 Connection keep-alive Content-Length 6212 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:14 GMT Expires Fri, 11 Mar 2011 20:52:01 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET The following are the Headers from the HOST response (Status-Line) HTTP/1.1 200 OK Cache-Control public, max-age=300 Content-Length 6189 Content-Type image/jpeg; charset=utf-8 Date Fri, 11 Mar 2011 20:47:15 GMT Last-Modified Fri, 11 Mar 2011 20:47:02 GMT Server Microsoft-IIS/7.5 X-AspNet-Version 4.0.30319 X-Powered-By ASP.NET You can see that with the CDN request, the countdown (age) starts for aging the content. The full sample is located here: CDNSampleSite.zip [1] http://blogs.msdn.com/b/windowsazure/archive/2011/03/09/now-available-updated-windows-azure-sdk-and-windows-azure-management-portal.aspx [2] http://msdn.microsoft.com/en-us/library/ff919703.aspx

Read the article

Play Your Favorite DOS Games in XP, Vista, and Windows 7

- by Matthew Guay

Want to take a trip down memory lane with old school DOS games? D-Fend Reloaded makes it easy for you to play your favorite DOS games directly on XP, Vista, and Windows 7. D-Fend Reloaded is a great frontend for DOSBox, the popular DOS emulator. It lets you install and run many DOS games and applications directly from its interface without ever touching a DOS prompt. It works great on XP, Vista, and Windows 7 32 & 64-bit versions. Getting Started Download D-Fend Reloaded (link below), and install with the default settings. You don’t need to install DOSBox, as D-Fend Reloaded will automatically install all the components you need to run DOS games on Windows. D-Fend Reloaded can also be installed as a portable application, so you can run it from a flash drive on any Windows computer by selecting User defined installation. Then select Portable mode installation. Once D-Fend Reloaded is installed, you can go ahead and open the program. Then simply click “Accept all settings” to apply the default settings. D-Fend is now ready to run all of your favorite DOS games. Installing DOS Games and Applications: To install a DOS game or application, simply drag-and-drop a zip file of the app into D-Fend Reloaded’s window. D-Fend Reloaded will automatically extract the program… Then will ask you to name the application and choose where to store it — by default it uses the name of the DOS app. Now you’ll see a new entry for the app you just installed. Simply double-click to run it. D-Fend will remind you that you can switch out of fullscreen mode by pressing Alt+Enter, and can also close the DOS application by pressing Ctrl+F9. Press Ok to run the program. Here we’re running Ms. PacPC, a remake of the classic game Ms. Pac-Man, in full-screen mode. All features work automatically, including sound, and you never have to setup anything from DOS command line — it just works. Here it’s in windowed mode running on Windows 7. Please note that your color scheme may change to Windows Basic while running DOS applications. You can run DOS application just as easily. Here’s Word 5.5 running in in DOSBox through D-Fend Reloaded… Game Packs: Want to quickly install many old DOS freeware and trial games? D-Fend Reloaded offers several game packs that let you install dozens of DOS games with only four clicks…just download and run the game pack installer of your choice (link below). Now you’ve got a selection of DOS games to choose from. Here’s a group of poor lemmings walking around … in Windows 7. Conclusion D-Fend Reloaded gives you a great way to run your favorite DOS games and applications directly from XP, Vista, and Windows 7. Give it a try, and relive your DOS days from the comfort of your Windows desktop. What were some of your favorite DOS games and applications? Leave a comment and let us know. Links Download D-Fend Reloaded Download DOS game packs for D-Fend Reloaded Download Ms. Pac-PC Similar Articles Productive Geek Tips Friday Fun: Get Your Mario OnFriday Fun: Go Retro with PacmanThursday’s Pre-Holiday Lazy Links RoundupFriday Fun: Five More Time Wasting Online GamesFriday Fun: Holiday Themed Games TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional The Growth of Citibank Quickly Switch between Tabs in IE Windows Media Player 12: Tweak Video & Sound with Playback Enhancements Own a cell phone, or does a cell phone own you? Make your Joomla & Drupal Sites Mobile with OSMOBI Integrate Twitter and Delicious and Make Life Easier

Read the article

Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 2

- by rajbk

In the previous post, you saw how to create an OData feed and pre-filter the data. In this post, we will see how to shape the data. A sample project is attached at the bottom of this post. Pre-filtering and shaping OData feeds using WCF Data Services and the Entity Framework - Part 1 Shaping the feed The Product feed we created earlier returns too much information about our products. Let’s change this so that only the following properties are returned – ProductID, ProductName, QuantityPerUnit, UnitPrice, UnitsInStock. We also want to return only Products that are not discontinued. Splitting the Entity To shape our data according to the requirements above, we are going to split our Product Entity into two and expose one through the feed. The exposed entity will contain only the properties listed above. We will use the other Entity in our Query Interceptor to pre-filter the data so that discontinued products are not returned. Go to the design surface for the Entity Model and make a copy of the Product entity. A “Product1” Entity gets created. Rename Product1 to ProductDetail. Right click on the Product entity and select “Add Association” Make a one to one association between Product and ProductDetails. Keep only the properties we wish to expose on the Product entity and delete all other properties on it (see diagram below). You delete a property on an Entity by right clicking on the property and selecting “delete”. Keep the ProductID on the ProductDetail. Delete any other property on the ProductDetail entity that is already present in the Product entity. Your design surface should look like below: Mapping Entity to Database Tables Right click on “ProductDetail” and go to “Table Mapping” Add a mapping to the “Products” table in the Mapping Details. After mapping ProductDetail, you should see the following. Add a referential constraint. Lets add a referential constraint which is similar to a referential integrity constraint in SQL. Double click on the Association between the Entities and add the constraint with “Principal” set to “Product”. Let us review what we did so far. We made a copy of the Product entity and called it ProductDetail We created a one to one association between these entities Excluding the ProductID, we made sure properties were not duplicated between these entities We added a ProductDetail entity to Products table mapping (Entity to Database). We added a referential constraint between the entities. Lets build our project. We get the following error: ”'NortwindODataFeed.Product' does not contain a definition for 'Discontinued' and no extension method 'Discontinued' accepting a first argument of type 'NortwindODataFeed.Product' could be found …" The reason for this error is because our Product Entity no longer has a “Discontinued” property. We “moved” it to the ProductDetail entity since we want our Product Entity to contain only properties that will be exposed by our feed. Since we have a one to one association between the entities, we can easily rewrite our Query Interceptor like so: [QueryInterceptor("Products")] public Expression<Func<Product, bool>> OnReadProducts() { return o => o.ProductDetail.Discontinued == false; } Similarly, all “hidden” properties of the Product table are available to us internally (through the ProductDetail Entity) for any additional logic we wish to implement. Compile the project and view the feed. We see that the feed returns only the properties that were part of the requirement. To see the data in JSON format, you have to create a request with the following request header Accept: application/json, text/javascript, */* (easy to do in jQuery) The result should look like this: { "d" : { "results": [ { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(1)", "type": "NorthwindModel.Product" }, "ProductID": 1, "ProductName": "Chai", "QuantityPerUnit": "10 boxes x 20 bags", "UnitPrice": "18.0000", "UnitsInStock": 39 }, { "__metadata": { "uri": "http://localhost.:2576/DataService.svc/Products(2)", "type": "NorthwindModel.Product" }, "ProductID": 2, "ProductName": "Chang", "QuantityPerUnit": "24 - 12 oz bottles", "UnitPrice": "19.0000", "UnitsInStock": 17 }, { ... ... If anyone has the $format operation working, please post a comment. It was not working for me at the time of writing this. We have successfully pre-filtered our data to expose only products that have not been discontinued and shaped our data so that only certain properties of the Entity are exposed. Note that there are several other ways you could implement this like creating a QueryView, Stored Procedure or DefiningQuery. You have seen how easy it is to create an OData feed, shape the data and pre-filter it by hardly writing any code of your own. For more details on OData, Google it with your favorite search engine :-) Also check out the one of the most passionate persons I have ever met, Pablo Castro – the Architect of Aristoria WCF Data Services. Watch his MIX 2010 presentation titled “OData: There's a Feed for That” here. Download Sample Project for VS 2010 RTM NortwindODataFeed.zip

Read the article

Part 14: Execute a PowerShell script

In the series the following parts have been published Part 1: Introduction Part 2: Add arguments and variables Part 3: Use more complex arguments Part 4: Create your own activity Part 5: Increase AssemblyVersion Part 6: Use custom type for an argument Part 7: How is the custom assembly found Part 8: Send information to the build log Part 9: Impersonate activities (run under other credentials) Part 10: Include Version Number in the Build Number Part 11: Speed up opening my build process template Part 12: How to debug my custom activities Part 13: Get control over the Build Output Part 14: Execute a PowerShell script Part 15: Fail a build based on the exit code of a console application With PowerShell you can add powerful scripting to your build to for example execute a deployment. If you want more information on PowerShell, please refer to http://technet.microsoft.com/en-us/library/aa973757.aspx For this example we will create a simple PowerShell script that prints “Hello world!”. To create the script, create a new text file and name it “HelloWorld.ps1”. Add to the contents of the script: Write-Host “Hello World!” To test the script do the following: Open the command prompt To run the script you must change the execution policy. To do this execute in the command prompt: powershell set-executionpolicy remotesigned Now go to the directory where you have saved the PowerShell script Execute the following command powershell .\HelloWorld.ps1 In this example I use a relative path, but when the path to the PowerShell script contains spaces, you need to change the syntax to powershell "& '<full path to script>' " for example: powershell "& ‘C:\sources\Build Customization\SolutionToBuild\PowerShell Scripts\HellloWorld.ps1’ " In this blog post, I create a new solution and that solution includes also this PowerShell script. I want to create an argument on the Build Process Template that holds the path to the PowerShell script. In the Build Process Template I will add an InvokeProcess activity to execute the PowerShell command. This InvokeProcess activity needs the location of the script as an argument for the PowerShell command. Since you don’t know the full path at the build server of this script, you can either specify in the argument the relative path of the script, but it is hard to find out what the relative path is. I prefer to specify the location of the script in source control and then convert that server path to a local path. To do this conversion you can use the ConvertWorkspaceItem activity. So to complete the task, open the Build Process Template CustomTemplate.xaml that we created in earlier parts, follow the following steps Add a new argument called “DeploymentScript” and set the appropriate settings in the metadata. See Part 2: Add arguments and variables for more information. Scroll down beneath the TryCatch activity called “Try Compile, Test, and Associate Changesets and Work Items” Add a new If activity and set the condition to "Not String.IsNullOrEmpty(DeploymentScript)" to ensure it will only run when the argument is passed. Add in the Then branch of the If activity a new Sequence activity and rename it to “Start deployment” Click on the activity and add a new variable called DeploymentScriptFilename (scoped to the “Start deployment” Sequence Add a ConvertWorkspaceItem activity on the “Start deployment” Sequence Add a InvokeProcess activity beneath the ConvertWorkspaceItem activity in the “Start deployment” Sequence Click on the ConvertWorkspaceItem activity and change the properties DisplayName = Convert deployment script filename Input = DeploymentScript Result = DeploymentScriptFilename Workspace = Workspace Click on the InvokeProcess activity and change the properties Arguments = String.Format(" ""& '{0}' "" ", DeploymentScriptFilename) DisplayName = Execute deployment script FileName = "PowerShell" To see results from the powershell command drop a WriteBuildMessage activity on the "Handle Standard Output" and pass the stdOutput variable to the Message property. Do the same for a WriteBuildError activity on the "Handle Error Output" To publish it, check in the Build Process Template This leads to the following result We now go to the build definition that depends on the template and set the path of the deployment script to the server path to the HelloWorld.ps1. (If you want to see the result of the PowerShell script, change the Logging verbosity to Detailed or Diagnostic). Save and run the build. A lot of the deployment scripts you have will have some kind of arguments (like username / password or environment variables) that you want to define in the Build Definition. To make the PowerShell configurable, you can follow the following steps. Create a new script and give it the name "HelloWho.ps1". In the contents of the file add the following lines: param ( $person ) $message = [System.String]::Format(“Hello {0}!", $person) Write-Host $message When you now run the script on the command prompt, you will see the following So lets change the Build Process Template to accept one parameter for the deployment script. You can of course make it configurable to add a for-loop that reads through a collection of parameters but that is out of scope of this blog post. Add a new Argument called DeploymentScriptParameter In the InvokeProcess activity where the PowerShell command is executed, modify the Arguments property to String.Format(" ""& '{0}' '{1}' "" ", DeploymentScriptFilename, DeploymentScriptParameter) Check in the Build Process Template Now modify the build definition and set the Parameter of the deployment to any value and run the build. You can download the full solution at BuildProcess.zip. It will include the sources of every part and will continue to evolve.

Read the article

How to build Open JavaFX for Android.

- by PictureCo

Here's a short recipe for baking JavaFX for Android dalvik. We will need just a few ingredients but each one requires special care. So let's get down to the business. SourcesThe first ingredient is an open JavaFX repository. This should be piece of cake. As always there's a catch. You probably know that dalvik is jdk6 compatible and also that certain APIs are missing comparing to good old java vm from Oracle. Fortunately there is a repository which is a backport of regular OpenJFX to jdk7 and going from jdk7 to jdk6 is possible. The first thing to do is to clone or download the repository from https://bitbucket.org/narya/jfx78. Main page of the project says "It works in some cases" so we will presume that it will work in most cases As I've said dalvik vm misses some APIs which would lead to a build failures. To get them use another compatibility repository which is available on GitHub https://github.com/robovm/robovm-jfx78-compat. Download the zip and unzip sources into jfx78/modules/base.We need also a javafx binary stubs. Use jfxrt.jar from jdk8.The last thing to download are freetype sources from http://freetype.org. These will be necessary for native font rendering. Toolchain setup I have to point out that these instructions were tested only on linux. I suppose they will work with minimal changes also on Mac OS. I also presume that you were able to build open JavaFX. That means all tools like ant, gradle, gcc and jdk8 have been installed and are working all right. In addition to this you will need to download and install jdk7, Android SDK and Android NDK for native code compilation. Installing all of them will take some time. Don't forget to put them in your path. export ANDROID_SDK=/opt/android-sdk-linux export ANDROID_NDK=/opt/android-ndk-r9b export JAVA_HOME=/opt/jdk1.7.0 export PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK FreetypeUnzip freetype release sources first. We will have to cross compile them for arm. Firstly we will create a standalone toolchain for cross compiling installed in ~/work/ndk-standalone-19. $ANDROID_NDK/build/tools/make-standalone-toolchain.sh --platform=android-19 --install-dir=~/work/ndk-standalone-19 After the standalone toolchain has been created cross compile freetype with following script: export TOOLCHAIN=~/work/freetype/ndk-standalone-19 export PATH=$TOOLCHAIN/bin:$PATH export FREETYPE=`pwd` ./configure --host=arm-linux-androideabi --prefix=$FREETYPE/install --without-png --without-zlib --enable-shared sed -i 's/\-version\-info \$(version_info)/-avoid-version/' builds/unix/unix-cc.mk make make install It will compile and install freetype library into $FREETYPE/install. We will link to this install dir later on. It would be possible also to link openjfx font support dynamically against skia library available on Android which already contains freetype. It creates smaller result but can have compatibility problems. Patching Download patches javafx-android-compat.patch + android-tools.patch and patch jfx78 repository. I recommend to have look at patches. First one android-compat.patch updates openjfx build script, removes dependency on SharedSecret classes and updates LensLogger to remove dependency on jdk specific PlatformLogger. Second one android-tools.patch creates helper script in android-tools. The script helps to setup javaFX Android projects. Building Now is time to try the build. Run following script: JAVA_HOME=/opt/jdk1.7.0 JDK_HOME=/opt/jdk1.7.0 ANDROID_SDK=/opt/android-sdk-linux ANDROID_NDK=/opt/android-ndk-r9b PATH=$JAVA_HOME/bin:$ANDROID_SDK/tools:$ANDROID_SDK/platform-tools:$ANDROID_NDK:$PATH gradle -PDEBUG -PDALVIK_VM=true -PBINARY_STUB=~/work/binary_stub/linux/rt/lib/ext/jfxrt.jar \ -PFREETYPE_DIR=~/work/freetype/install -PCOMPILE_TARGETS=android If everything went all right the output is in build/android-sdk Create first JavaFX Android project Use gradle script int android-tools. The script sets the project structure for you. Following command creates Android HelloWorld project which links to a freshly built javafx runtime and to a HelloWorld application. NAME is a name of Android project. DIR where to create our first project. PACKAGE is package name required by Android. It has nothing to do with a packaging of javafx application. JFX_SDK points to our recently built runtime. JFX_APP points to dist directory of javafx application. (where all application jars sit) JFX_MAIN is fully qualified name of a main class. gradle -PDEBUG -PDIR=/home/user/work -PNAME=HelloWorld -PPACKAGE=com.helloworld \ -PJFX_SDK=/home/user/work/jfx78/build/android-sdk -PJFX_APP=/home/user/NetBeansProjects/HelloWorld/dist \ -PJFX_MAIN=com.helloworld.HelloWorld createProject Now cd to the created project and use it like any other android project. ant clean, debug, uninstall, installd will work. I haven't tried it from any IDE Eclipse nor Netbeans. Special thanks to Stefan Fuchs and Daniel Zwolenski for the repositories used in this blog post.

Read the article

Searching for tasks with code – Executables and Event Handlers

Searching packages or just enumerating through all tasks is not quite as straightforward as it may first appear, mainly because of the way you can nest tasks within other containers. You can see this illustrated in the sample package below where I have used several sequence containers and loops. To complicate this further all containers types, including packages and tasks, can have event handlers which can then support the full range of nested containers again. Towards the lower right, the task called SQL In FEL also has an event handler not shown, within which is another Execute SQL Task, so that makes a total of 6 Execute SQL Tasks 6 tasks spread across the package. In my previous post about such as adding a property expressionI kept it simple and just looked at tasks at the package level, but what if you wanted to find any or all tasks in a package? For this post I've written a console program that will search a package looking at all tasks no matter how deeply nested, and check to see if the name starts with "SQL". When it finds a matching task it writes out the hierarchy by name for that task, starting with the package and working down to the task itself. The output for our sample package is shown below, note it has found all 6 tasks, including the one on the OnPreExecute event of the SQL In FEL task TaskSearch v1.0.0.0 (1.0.0.0) Copyright (C) 2009 Konesans Ltd Processing File - C:\Projects\Alpha\Packages\MyPackage.dtsx MyPackage\FOR Counter Loop\SQL In Counter Loop MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL MyPackage\SEQ For Each Loop Wrapper\FEL Simple Loop\SQL In FEL\OnPreExecute\SQL On Pre Execute for FEL SQL Task MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SEQ Nested Lvl 2\SQL In Nested Lvl 2 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #1 MyPackage\SEQ Top Level\SEQ Nested Lvl 1\SQL In Nested Lvl 1 #2 6 matching tasks found in package. The full project and code is available for download below, but first we can walk through the project to highlight the most important sections of code. This code has been abbreviated for this description, but is complete in the download. First of all we load the package, and then start by looking at the Executables for the package. // Load the package file Application application = new Application(); using (Package package = application.LoadPackage(filename, null)) { int matchCount = 0; // Look in the package's executables ProcessExecutables(package.Executables, ref matchCount); ... // // ... // Write out final count Console.WriteLine("{0} matching tasks found in package.", matchCount); } The ProcessExecutables method is a key method, as an executable could be described as the the highest level of a working functionality or container. There are several of types of executables, such as tasks, or sequence containers and loops. To know what to do next we need to work out what type of executable we are dealing with as the abbreviated version of method shows below. private static void ProcessExecutables(Executables executables, ref int matchCount) { foreach (Executable executable in executables) { TaskHost taskHost = executable as TaskHost; if (taskHost != null) { ProcessTaskHost(taskHost, ref matchCount); ProcessEventHandlers(taskHost.EventHandlers, ref matchCount); continue; } ... // // ... ForEachLoop forEachLoop = executable as ForEachLoop; if (forEachLoop != null) { ProcessExecutables(forEachLoop.Executables, ref matchCount); ProcessEventHandlers(forEachLoop.EventHandlers, ref matchCount); continue; } } } As you can see if the executable we find is a task we then call out to our ProcessTaskHost method. As with all of our executables a task can have event handlers which themselves contain more executables such as task and loops, so we also make a call out our ProcessEventHandlers method. The other types of executables such as loops can also have event handlers as well as executables. As shown with the example for the ForEachLoop we call the same ProcessExecutables and ProcessEventHandlers methods again to drill down into the hierarchy of objects that the package may contain. This code needs to explicitly check for each type of executable (TaskHost, Sequence, ForLoop and ForEachLoop) because whilst they all have an Executables property this is not from a common base class or interface. This example was just a simple find a task by its name, so ProcessTaskHost really just does that. We also get the hierarchy of objects so we can write out for information, obviously you can adapt this method to do something more interesting such as adding a property expression. private static void ProcessTaskHost(TaskHost taskHost, ref int matchCount) { if (taskHost == null) { return; } // Check if the task matches our match name if (taskHost.Name.StartsWith(TaskNameFilter, StringComparison.OrdinalIgnoreCase)) { // Build up the full object hierarchy of the task // so we can write it out for information StringBuilder path = new StringBuilder(); DtsContainer container = taskHost; while (container != null) { path.Insert(0, container.Name); container = container.Parent; if (container != null) { path.Insert(0, "\\"); } } // Write the task path // e.g. Package\Container\Event\Task Console.WriteLine(path); Console.WriteLine(); // Increment match counter for info matchCount++; } } Just for completeness, the other processing method we covered above is for event handlers, but really that just calls back to the executables. This same method is called in our main package method, but it was omitted for brevity here. private static void ProcessEventHandlers(DtsEventHandlers eventHandlers, ref int matchCount) { foreach (DtsEventHandler eventHandler in eventHandlers) { ProcessExecutables(eventHandler.Executables, ref matchCount); } } As hopefully the code demonstrates, executables (Microsoft.SqlServer.Dts.Runtime.Executable) are the workers, but within them you can nest more executables (except for task tasks).Executables themselves can have event handlers which can in turn hold more executables. I have tried to illustrate this highlight the relationships in the following diagram. Download Sample code project TaskSearch.zip (11KB)

Read the article

How to Increase the VMWare Boot Screen Delay

- by Trevor Bekolay

If you’ve wanted to try out a bootable CD or USB flash drive in a virtual machine environment, you’ve probably noticed that VMWare’s offerings make it difficult to change the boot device. We’ll show you how to change these options. You can do this either for one boot, or permanently for a particular virtual machine. Even experienced users of VMWare Player or Workstation may not recognize the screen above – it’s the virtual machine’s BIOS, which in most cases flashes by in the blink of an eye. If you want to boot up the virtual machine with a CD or USB key instead of the hard drive, then you’ll need more than an eye’s-blink to press Escape and bring up the Boot Menu. Fortunately, there is a way to introduce a boot delay that isn’t exposed in VMWare’s graphical interface – you have to edit the virtual machine’s settings file (a .vmx file) manually. Editing the Virtual Machine’s .vmx Find the .vmx file that contains the settings for your virtual machine. You chose a location for this when you created the virtual machine – in Windows, the default location is a folder called My Virtual Machines in your My Documents folder. In VMWare Workstation, the location of the .vmx file is listed on the virtual machine’s tab. If in doubt, search your hard drive for .vmx files. If you don’t want to use Windows default search, an awesome utility that locates files instantly is Everything. Open the .vmx file with any text editor. Somewhere in this file, enter in the following line… save the file, then close out of the text editor: bios.bootdelay = 20000 This will introduce a 20 second delay when the virtual machine loads up, giving you plenty of time to press the Escape button and access the boot menu. The number in this line is just a value in milliseconds, so for a five second boot delay, enter 5000, and so on. Change Boot Options Temporarily Now, when you boot up your virtual machine, you’ll have plenty of time to enter one of the keystrokes listed at the bottom of the BIOS screen on boot-up. Press Escape to bring up the Boot Menu. This allows you to select a different device to boot from – like a CD drive. Your selection will be forgotten the next time you boot up this virtual machine. Change Boot Options Permanently When the BIOS screen comes up, press F2 to enter the BIOS Setup menu. Switch to the Boot tab, and change the ordering of the items by pressing the “+” key to move items up on the list, and the “-” key to move items down the list. We’ve switched the order so that the CD-ROM Drive boots first. Once you make this change permanent, you may want to re-edit the .vmx file to remove the boot delay. Boot from a USB Flash Drive One thing that is noticeably missing from the list of boot options is a USB device. VMWare’s BIOS just does not allow this, but we can get around that limitation using the PLoP Boot Manager that we’ve previously written about. And as a bonus, since everything is virtual anyway, there’s no need to actually burn PLoP to a CD. Open the settings for the virtual machine you want to boot with a USB drive. Click on Add… at the bottom of the settings screen, and select CD/DVD Drive. Click Next. Click the Use ISO Image radio button, and click Next. Browse to find plpbt.iso or plpbtnoemul.iso from the PLoP zip file. Ensure that Connect at power on is checked, and then click Finish. Click OK on the main Virtual Machine Settings page. Now, if you use the steps above to boot using that CD/DVD drive, PLoP will load, allowing you to boot from a USB drive! Conclusion We’re big fans of VMWare Player and Workstation, as they let us try out a ton of geeky things without worrying about harming our systems. By introducing a boot delay, we can add bootable CDs and USB drives to the list of geeky things we can try out. Download PLoP Boot Manager Similar Articles Productive Geek Tips How To Switch to Console Mode for Ubuntu VMware GuestHack: Turn Off Debug Mode in VMWare Workstation 6 BetaStart Your Computer More Quickly by Delaying the Startup of a Service in VistaEnable Hidden BootScreen in Windows VistaEnable Copy and Paste from Ubuntu VMware Guest TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error

Read the article

Chart Control in ASP.Net 4 – Second Part

- by sreejukg

Couple of weeks before, I have written an introduction about the chart control available in .Net framework. In that article, I explained the basic usage of the chart control with a simple example. You can read that article from the url http://weblogs.asp.net/sreejukg/archive/2010/12/31/getting-started-with-chart-control-in-asp-net-4-0.aspx. In this article I am going to demonstrate how one can generate various types of charts that can be generated easily using the ASP.Net chart control. Let us recollect the data sample we were working in the previous sample. The following is the data I used in the previous article. id SaleAmount SalesPerson SaleType SaleDate CompletionStatus (%) 1 1000 Jack Development 2010-01-01 100 2 300 Mills Consultancy 2010-04-14 90 3 4000 Mills Development 2010-05-15 80 4 2500 Mike eMarketting 2010-06-15 40 5 1080 Jack Development 2010-07-15 30 6 6500 Mills Consultancy 2010-08-24 65 In this article I am going to demonstrate various graphical reports generated from this data with the help of chart control. The following are the reports I am going to generate 1. Representation of share of Sales by each Sales person. 2. Representation of share of sales data according to sale type 3. Representation of sales progress over time period I am going to demonstrate how to bind the chart control programmatically. In order to facilitate this, I created an aspx page named “SalesAnalysis.Aspx” to my project. In the page I added the following controls 1. Dropdownlist control – with id ddlAnalysisType, user will use this to choose the type of chart they want to see. 2. A Button control – with id btnSubmit , by clicking this button, the chart based on the dropdownlist selection will be shown to the user 3. A label Control – with id lblMessage, to display the message to the user, initially this will ask the user to select an option and click on the button. 4. Chart control – with id chrtAnalysis, by default, I set visible = false so that during the page load the chart will be hidden to the users. The following is the initial output of the page. Generating chart for salesperson share Now from Visual Studio, I have double clicked on the button; it created the event handler btnSubmit_Click. In the button Submit event handler, I am using a switch case to execute the corresponding SQL statement and bind it to the chart control. The below is the code for generating the sales person share chart using a pie chart. The above code produces the following output The steps for creating the above chart can be summarized as follows. You specify a chart area, then a series and bind the chart to some x and y values. That is it. If you want to control the chart size and position, you can set the properties for the ChartArea.Position element. For e.g. in the previous code, after instantiating the chart area, setting the below code will give you a bigger pie chart. c.Position.Width = 100; c.Position.Height = 100; The width and height values are in percentage. In this case the chart will be generated by utilizing all the width and height of the chart object. See the output updated with the width and height set to 100% each. Generate Chart for sales type share Now for generating the chart according to the sales type, you just need to change the SQL query and x and y values of the chart. The Sql query used is “SELECT SUM(saleAmount) amount, SaleType from SalesData group by SaleType” and the X-Value is amount and Y-Values is SaleType. s.XValueMember = "SaleType"; s.YValueMembers = "amount"; After modifying the above code with these, the following output is generated. Generate Chart for sales progress over time period For generating the progress of sale chart against sales amount / period, line chart is the ideal tool. In order to facilitate the line chart, you can use Chart Type as System.Web.UI.DataVisualization.Charting.SeriesChartType.Line. Also we need to retrieve the amount and sales date from the data source. I have used the following query to facilitate this. “SELECT SaleAmount, SaleDate FROM SalesData” The output for the line chart is as follows Now you have seen how easily you can build various types of charts. Chart control is an excellent one that helps you to bring business intelligence to your applications. What I demonstrated in only a small part of what you can do with the chart control. Refer http://msdn.microsoft.com/en-us/library/dd456632.aspx for further reading. If you want to get the project files in zip format, post your email below. Hope you enjoyed reading this article.

Read the article

Using the Static Code Analysis feature of Visual Studio (Premium/Ultimate) to find memory leakage problems

- by terje

Memory for managed code is handled by the garbage collector, but if you use any kind of unmanaged code, like native resources of any kind, open files, streams and window handles, your application may leak memory if these are not properly handled. To handle such resources the classes that own these in your application should implement the IDisposable interface, and preferably implement it according to the pattern described for that interface. When you suspect a memory leak, the immediate impulse would be to start up a memory profiler and start digging into that. However, before you follow that impulse, do a Static Code Analysis run with a ruleset tuned to finding possible memory leaks in your code. If you get any warnings from this, fix them before you go on with the profiling. How to use a ruleset In Visual Studio 2010 (Premium and Ultimate editions) you can define your own rulesets containing a list of Static Code Analysis checks. I have defined the memory checks as shown in the lists below as ruleset files, which can be downloaded – see bottom of this post. When you get them, you can easily attach them to every project in your solution using the Solution Properties dialog. Right click the solution, and choose Properties at the bottom, or use the Analyze menu and choose “Configure Code Analysis for Solution”: In this dialog you can now choose the Memorycheck ruleset for every project you want to investigate. Pressing Apply or Ok opens every project file and changes the projects code analysis ruleset to the one we have specified here. How to define your own ruleset (skip this if you just download my predefined rulesets) If you want to define the ruleset yourself, open the properties on any project, choose Code Analysis tab near the bottom, choose any ruleset in the drop box and press Open Clear out all the rules by selecting “Source Rule Sets” in the Group By box, and unselect the box Change the Group By box to ID, and select the checks you want to include from the lists below. Note that you can change the action for each check to either warning, error or none, none being the same as unchecking the check. Now go to the properties window and set a new name and description for your ruleset. Then save (File/Save as) the ruleset using the new name as its name, and use it for your projects as detailed above. It can also be wise to add the ruleset to your solution as a solution item. That way it’s there if you want to enable Code Analysis in some of your TFS builds. Running the code analysis In Visual Studio 2010 you can either do your code analysis project by project using the context menu in the solution explorer and choose “Run Code Analysis”, you can define a new solution configuration, call it for example Debug (Code Analysis), in for each project here enable the Enable Code Analysis on Build In Visual Studio Dev-11 it is all much simpler, just go to the Solution root in the Solution explorer, right click and choose “Run code analysis on solution”. The ruleset checks The following list is the essential and critical memory checks. CheckID Message Can be ignored ? Link to description with fix suggestions CA1001 Types that own disposable fields should be disposable No http://msdn.microsoft.com/en-us/library/ms182172.aspx CA1049 Types that own native resources should be disposable Only if the pointers assumed to point to unmanaged resources point to something else http://msdn.microsoft.com/en-us/library/ms182173.aspx CA1063 Implement IDisposable correctly No http://msdn.microsoft.com/en-us/library/ms244737.aspx CA2000 Dispose objects before losing scope No http://msdn.microsoft.com/en-us/library/ms182289.aspx CA2115 1 Call GC.KeepAlive when using native resources See description http://msdn.microsoft.com/en-us/library/ms182300.aspx CA2213 Disposable fields should be disposed If you are not responsible for release, of if Dispose occurs at deeper level http://msdn.microsoft.com/en-us/library/ms182328.aspx CA2215 Dispose methods should call base class dispose Only if call to base happens at deeper calling level http://msdn.microsoft.com/en-us/library/ms182330.aspx CA2216 Disposable types should declare a finalizer Only if type does not implement IDisposable for the purpose of releasing unmanaged resources http://msdn.microsoft.com/en-us/library/ms182329.aspx CA2220 Finalizers should call base class finalizers No http://msdn.microsoft.com/en-us/library/ms182341.aspx Notes: 1) Does not result in memory leak, but may cause the application to crash The list below is a set of optional checks that may be enabled for your ruleset, because the issues these points too often happen as a result of attempting to fix up the warnings from the first set. ID Message Type of fault Can be ignored ? Link to description with fix suggestions CA1060 Move P/invokes to NativeMethods class Security No http://msdn.microsoft.com/en-us/library/ms182161.aspx CA1816 Call GC.SuppressFinalize correctly Performance Sometimes, see description http://msdn.microsoft.com/en-us/library/ms182269.aspx CA1821 Remove empty finalizers Performance No http://msdn.microsoft.com/en-us/library/bb264476.aspx CA2004 Remove calls to GC.KeepAlive Performance and maintainability Only if not technically correct to convert to SafeHandle http://msdn.microsoft.com/en-us/library/ms182293.aspx CA2006 Use SafeHandle to encapsulate native resources Security No http://msdn.microsoft.com/en-us/library/ms182294.aspx CA2202 Do not dispose of objects multiple times Exception (System.ObjectDisposedException) No http://msdn.microsoft.com/en-us/library/ms182334.aspx CA2205 Use managed equivalents of Win32 API Maintainability and complexity Only if the replace doesn’t provide needed functionality http://msdn.microsoft.com/en-us/library/ms182365.aspx CA2221 Finalizers should be protected Incorrect implementation, only possible in MSIL coding No http://msdn.microsoft.com/en-us/library/ms182340.aspx Downloadable ruleset definitions I have defined three rulesets, one called Inmeta.Memorycheck with the rules in the first list above, and Inmeta.Memorycheck.Optionals containing the rules in the second list, and the last one called Inmeta.Memorycheck.All containing the sum of the two first ones. All three rulesets can be found in the zip archive “Inmeta.Memorycheck” downloadable from here. Links to some other resources relevant to Static Code Analysis MSDN Magazine Article by Mickey Gousset on Static Code Analysis in VS2010 MSDN : Analyzing Managed Code Quality by Using Code Analysis, root of the documentation for this Preventing generated code from being analyzed using attributes Online training course on Using Code Analysis with VS2010 Blogpost by Tatham Oddie on custom code analysis rules How to write custom rules, from Microsoft Code Analysis Team Blog Microsoft Code Analysis Team Blog

Search Results

Search found 2899 results on 116 pages for '7 zip'.

Page 99/116 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106 | Next Page >

- by Damon

- by dotancohen

- by avalore

- by Termos

- by SiggyF

- by Prasanna K Rao

- by Robert Mandeville

- by user237389

- by Zarkopafilis

- by Shervin Shakibi

- by jamiet

- by rajbk

- by evovision

- by Aamir Hasan

- by Shawn Cicoria

- by Matthew Guay

- by rajbk

- by PictureCo

- by Trevor Bekolay

- by sreejukg

- by terje

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106 | Next Page >