Search Results

Search found 25266 results on 1011 pages for 'internet usage'.

Page 99/1011 | < Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >

• ubuntu qcow2 image for local usage

  - by aisbaa

  I'm using kvm and I would like to run ubuntu server on it. My goal is to run db2 database instance for development. Is there ready to use ubuntu qcow2 images online for such purpose? Or should I install it from live cd? I've found this instruction UEC/Images, but at launch I get: $ kvm -fda ${floppy} -drive if=virtio,file=./disk.img -boot a ... Nothing to boot: No such file or directory (http://ipxe.org/...) No more network devices No bootable device. Solution: I havent found pre-installed ubuntu virtual machine image online, so solution is to install it by your self.

  Read the article

• Usage of two Routers on LAN

  - by brusilva

  I've currently own a Linksys E4200 and a Thomson 546v6. Because I have an IPTV service I must set the Thomson as the main router connected to the phone line so that I can distribute the video signal for 2 specific ports and the other two for LAN Access. The problem is that the Thomson doesn't like port forwards, it usually doesnt work and since I have a good router (linksys) currently only working as Access Point I would like to use it as a router itself. I don't want to do a NAT beyond NAT so my question is should I connect the E4200 and to thomson and set the E4200 as a DMZ machine and then control all trafic on the E4200 itself or is there any other option that could suit my needs better?

  Read the article

• Why is my Asus P5PL2-E using 640MB of RAM (out of 4GB) ? [closed]

  - by Tom

  Possible Duplicate: Windows XP and RAM 3.5GB+ I've recently installed 4GB of RAM on my server, which is running Windows XP SP2 32-bit and My Computer showed that only 3.37GB were installed. After digging Google for a bit, I couldn't find anything helpful, but I do remember reading a post in a forum regarding the motherboard using 640MB of RAM. Digging in my own BIOS, I've also found that my motherboard has also reserved that amount for its self. Why does my motherboard reserve this memory and how can I tune it down to say 128MB?

  Read the article

• Ubuntu - No gnome-panels, no right-click, no internet, no hotkeys

  - by Darthfett

  Hey guys, I've been using Ubuntu (Maverick 10.10) on my desktop (ATI Radeon 5830) for about 3 weeks now, but all of a sudden I am unable to even use my computer. As soon as I start up, I see my desktop, with icons, but I don't see any gnome-panels, and I'm unable to get any options if I right-click. I can start programs by double clicking them. I also cannot get an internet connection. I've tried restarting gnome-panel by killing it, using Ctrl+Alt+5 to switch to a terminal (I don't have a shortcut to one on my desktop, and no hotkeys will work), but no luck. Restarting my computer has no effect upon this (I have to manually cut the power, since I don't know the terminal command). As far as I know, I have not made any changes, and I've never had any problems in the past. This started when I was playing Minecraft, but my internet crapped out, and no amount of re-trying the connection would work. I know it was my computer, as my brother's was working fine in the other room. Any clues as to what's going on? I'm more than willing to troubleshoot.

  Read the article

• Best usage for a laptop being used as a desktop without removable batteries

  - by Senseful

  After reading the information on http://batteryuniversity.com, I realize that one of the best ways to permanently damage a lithium ion battery is to use the battery at a high temperature while it's fully charged. This is exactly what happens when you use the computer as if it were a desktop computer, since leaving it plugged in will keep the battery at 100% and using the computer will heat up the battery. This is why it's recommend to remove the battery from your laptop if you are using it is this scenario. My question is what would you do if the laptop doesn't have removable batteries (e.g. a MacBook Pro)? Should I use some kind of charge cycle such as: charge to 80%, unplug the power chord, use the laptop until it reaches 20%, then repeat the cycle by charging to 80% again? If so, which values should I use instead of 80% and 20%? (I think charging to 80% is better than 100% because of the damage that a hot battery at 100% can do, but I just made the figure 80% up, and I'm sure there's a better number to strive for which is backed by science.) I've read many of the articles on batteryuniversity.com, but couldn't find anything pertaining to this. Update: What about doing something like charge (or discharge) it to 50%, then plug it in and turn on settings which use the battery as much as possible (e.g. brightness all the way up, wi-fi on, etc.), in order to try to maintain the battery at 50% (i.e. the rate it is charging is the same as it is discharging). This will probably heat up the battery, but would make it so you don't need to constantly plug and unplug the laptop. The one bad thing is that you are taking up more charge cycles which would decrease the battery life, thus I'm not sure this is a good idea.

  Read the article

• cannot connect to vpn server (error 721)

  - by callmeblessed

  Hi I got 2 internet connections in my computer. One is using 3.5G HSDPA modem (vodafone huawei e220) and the other using mobile phone (cdma zte c261). Both are using different ISP and i have both. at the moment, i can connect to my office vpn using the HSDPA modem one. But when i tried to use cdma modem (dial up - mobile phone modem), i am just able to get "verifying username and password" and then after a few minutes it display error : Error 721 The Remote Computer didn't respond. I tried to ping into my office ip address, it got good result but still cannot connect to the vpn. I tried to turn off all my firewall (i'm using commodo) and has no response as well. In my cdma mobile phone modem Network connections I tried to allow iNternet connection sharing as well ... and turn on all Internet Protocol TCP/IP, File & Printer Sharing & Client for microsoft networks. But all of my effort has no effect. How to fix this problem ? note: my office using windows vpn as well. thank you .

  Read the article

• Is there a dynamic power consumption equation for RAM?

  - by kashyapa

  How is the dynamic power consumption of memory determined . Can anybody give a canonical equation for power consumption of the RAM. What are the parameters involved in determing the dynamic power consumption of RAM ? Thanks in advance

  Read the article

• Odd Suhosin memory alerts

  - by slice

  I am getting a lot of odd suhosin alerts in my syslog. The following are example entries: Jun 9 08:46:11 suhosin[9764]: ALERT - script tried to increase memory_limit to 2145386496 bytes which is above the allowed value (attacker '157.55.39.180', file '/var/www/site/index.php') Jun 9 08:46:11 suhosin[9744]: ALERT - script tried to increase memory_limit to 2145386496 bytes which is above the allowed value (attacker '109.74.2.136', file '/var/www/site/test.php') Jun 9 08:46:13 suhosin[9779]: ALERT - script tried to increase memory_limit to 0 bytes which is above the allowed value (attacker 'REMOTE_ADDR not set', file 'unknown') Jun 9 08:46:13 suhosin[9779]: ALERT - script tried to increase memory_limit to 2145386496 bytes which is above the allowed value (attacker 'REMOTE_ADDR not set', file 'unknown') What is happening here? Why 0 bytes or 2145386496 bytes (2046 GB!!??)? Why does it sometimes state the attacker and the requested script and sometimes state 'REMOTE_ADDR not set' and file 'unknown'? How do I proceed to figure this out?

  Read the article

• Disk usage treemap software for headless Linux

  - by CyberShadow

  There are some programs which can display used disk space using a treemap, such as WinDirStat for Windows and KDirStat for KDE/Linux: I'm looking for something similar, but for a headless Linux box. (E.g. run console data collection program on the server, then load the file in a graphical program in a GUI environment.) Alternatively, what are other good ways to get a structured used disk space representation, with just SSH access?

  Read the article

• how can i use apache log files to recreate usage scenario

  - by daigorocub

  Recently i installed a website that had too many requests and it was too slow. Many improvements have been made to the web site code and we've also bought a new server. I want to test the new server with exactly the same requests that made the old server slow. After that, i will double the requests, make new tests and so on. These requests are logged in the apache log files. So, I can parse those files and make some kind of script to make the same requests. Of course, in this case, the requests will be made only by my computer against the server, but hey, better than nothing. Questions: - is there some app that does this already? - would you use wget? ab? python script? Thanks!

  Read the article

• Track PC usage (keys pressed, hours used etc)

  - by yes123

  I heard once there was a software that could log your activity (form a developer point of view) like: How many key did you press How many hours you moved the mouse This software had cloud saving so you could install and use on all your pc/notebook. It would be cool if by 5 years I could know how many lines of code/text I have wrote or how many time I have worked Please note I don't want a keylogger (I just want to know my activity over time)

  Read the article

• Windows 7 memory usage

  - by lydonchandra

  Physical memory(MB) for Windows 7 Total 4021 Cached 1113 Available 768 Free 174 Memory used 3.25GB At this point, windows7 asks me to close some programs because "system memory is low". From my understanding reading articles, I still have 768 MB free memory, why does windows7 complain? Also what does Cached memory refer to? Is this part of memory that Windows7 reserved for itself meaning it's free to use by Windows7 (and means I have about 768 + 1113 MB of free mem?)?

  Read the article

• Memory Usage of SQL Server

  - by Ashish

  SQL Server instance on my server is using almost full memory available in my Physical Server. Say if i am having 8GB of RAM than SQL Server is using 7.8 GB of RAM from system. I also have read articles and also read many similar questions regarding same on this forum and i understand that memory is reserved and it is using memory. But i have 2 same servers and 2 SQL Servers, why this is happening on a single SQL Instance not on other. Also when i run DBCC MemoryStatus than it is showing up... VM Reserved 8282008 VM Committed 537936 so from this we know that SQL reserved whole 8GB memory, but why this VM Committed keeps increasing. What i understand is VM Committed is: VM Committed: This value shows the overall amount of VAS that SQL Server has committed. VAS that is committed has been associated with physical memory. So this is the memory SQL Server has committed (from this i understand that physical memory actually SQL Server is using at instance). So like to know the reason behind this ever increasing VM Committed memory on my server and not on another. Thanks in Advance.

  Read the article

• unable to access Internet by wireless but can by cable

  - by Jeff King

  i'M GOING MAD! UNtil last friday I had been successfully using wifi with the supplier as VIRGIN through their Motorola SB 4200 cable Modem and the wireless router being the Linksys WRT 54G router. Supported were three lap tops and an EPSON 510W printer and this had been running with no issue for about 3 years. Back to last friday, we started suffering significant delays and then the network collapsed with no wireless access. I was able to connect a single laptop direct to the cable modem and internet access was restored to just that one device. I thought that the problem was the router so I tried a backup D-Link device with no success. I have subsequently bought another cable modem AND a netgear router plus addidtional ethernet cables but with no success. The best that happens is that the signal appears good but I cannot get access to the internet. A yellow question mark appears on the 'gradient' icon. Each laptop and router works elsewhere so I'm stumped. Mind you I am a real novice so I'm not surprised. Please can anyone tell me what I'm doing wrong?

  Read the article

• Linux servers vs Windows IIS sense of usage "free" solutions

  - by Rob

  I wonder what is the sense of using "free" open source solutions for serious webstie applications? Crawled and read many testing of servers performance and there is one conclusion: IIS seems to be the best choice for high load applicatiom. I mean cost effective. Especially this concers to Nginx PLUS and LiteSpeed Users where subscriptions paid for e.g. LoadBalacer and extra support cost a lot in fact. I'm asking then where it's "free" then or "cheap" in this case? Assuming even little higher cost of dedicated servers with Windows still seems like Windows looks cheaper. At it's basic setup Windows 2012 with IIS offer much more than std LAMP, or other NGINX config.... Maybe am I missing sth ? I mean only general case for someone who did not already started his app. I know exactly that the cheapest solution is the one someone is skilled. Has anyone done already such real costs calculation for example scenarios?

  Read the article

• Is there a list of Windows services that can be turned off to save resources?

  - by scunliffe

  Every time I open up my task manager and look at the tasks running, it appears to me that there has got to be a bunch of junk running in there that I don't want or need and would be better off turning off (e.g. set the service to manual vs. automatic) In particular I'm running Windows XP, but I'd be interested in services for any version. e.g. Service: ThinkPad PM Service What is it: The ibmpmsvc.exe process is installed by default on IBM Notebook computers. It allows various functions of your IBM notebook to be controlled using the blue Fn keys. If you use the blue Fn keys on your Notebook, you should leave this process running. Otherwise, if it is causing problems for your system you should terminate the ibmpmsvc.exe process. (source) Thus for me, (having never used, or intending to use these buttons) - I want to turn it off. There's lots that just seem painfully unnecessary to me... I'm just not sure which ones I can "safely" stop/disable without issues... "Alerter", "ClipBook", "Messenger", "Telnet", "ATI Hotkey Poller", "Office Source Engine", etc. I'd appreciate any info on services that are truly unnecessary, or only useful to certain people/types of users.

  Read the article

• Reduce "Metafile" memory usage?

  - by Jay Conrod

  My work computer (Windows 7 64-bit) spends a lot of time swapping memory when I switch between programs. This surprises me since I have 4 GB of RAM, and the programs I use aren't particularly RAM hungry (Outlook, Emacs, p4win, Firefox, various build tools). I downloaded RAMMap, and it shows over a gigabyte of memory used by "Metafile". From the Sysinternals blog: Metafile is part of the system cache and consists of NTFS metadata. NTFS metadata includes the MFT as well as the other various NTFS metadata files. ... In the MFT each file attribute record takes 1k and each file has at least one attribute record. Add to this the other NTFS metadata files and you can see why the Metafile category can grow quite large on servers with lots of files. So I understand what the "Metafile" data is... I work on large builds comprising hundreds of thousands of files (none are that big, but they add up to several gigabytes). My question is how can I reduce the amount of memory used by "Metafile"? I'm not actively using all those files at once, so why does Windows need to keep info in RAM? Restarting my machine every time I sync a new build is really annoying.

  Read the article

• PHP Script causing high CPU

  - by user20996

  I have a website which is causing me a major headache. There is one PHP script which is using far to much CPU, this only seem to happen when bots hit the site, I dont want to block all the bots because we need them. I have the the process manager output: Pid Owner Priority CPU % Memory % Command 16943 (Trace) (Kill) specialone 0 99.4 1.0 /usr/bin/php /var/www/specialone/page.php I ran strace -p 16943 on the process but it comes up with nothing. We have 2GB of RAM and the php memory_limit is set to 128M which should be enough. The trouble I have is the PHP code is a Framework and the culprit page.php pulls in a lot of other PHP files so I cant debug the PHP. Is there any way of finding out what the script is doing when its using so much CPU which will help me solve it?

  Read the article

• IIS 7 UI: Like or Don't Like it?

  - by Vivek

  I have been using IIS 7 / 7.5 for quite sometime now. But often I come across situation where one particular option which I remember quite well in IIS 6 seems to be missing or couldn't find in IIS 7. Do you find yourself lost when using IIS 7 UI?

  Read the article

• Why is idle windows VM using so much CPU?

  - by Jeff Shattock

  I have 2 VMs running as guests on a KVM virtualization platform running on Ubuntu 10.04. One VM is an Ubuntu 10.04 system, the other is a Windows 7 system. When both machines are completely logged out, the Linux machine uses 1% CPU, the Windows one 45-50%, according to top. The graphs in virt-manager seem to back this up. Theres nothing installed on the Win7 image that would be running in the background; its as fresh as can be. Why is the Windows VM using so much more than the Linux VM, when both are logged out and idling?

  Read the article

• How to use 2 or more internet connections on the same network?

  - by Rogue

  Living in a joint family we have 3 internet connections, each floor has one internet connection which is split per floor. Each internet connection is shared between 4-5 computers using a switch per floor. Each of these internet sharing networks are independent of each other. What I want to achieve here is a local network (for local messenger and file sharing) that can combine all the 3 independent networks, problem is that whenever I try to do that the whole network tends to use just one internet connection. I have all the necessary hardware. How do I solve this problem, one approach could be that I could get one PC to act as a server and bridge the internet connections and then the whole network would have to access the internet through this server. Theoretically this could be possible but I have never tried this approach in real life. Also if certain computers need be restricted from internet access how would this be possible on the same network?

  Read the article

• How to set up daisy-chained routers for separate sub-nets?

  - by joe

  This question seems to be similar to others, but I'll take a shot anyway. A client recently switched ISPs from TDS to Comcast Business Class. Before the switch, they had 5 static IP addresses assigned. Now they'll have a single IP address that will change whenever Comcast decides to do so. The issue is that this internet connection will be shared among two companies, both having (and wanting to keep) their own private subnets. Because TDS was supplying multiple IP addresses to the one location, this allowed me to put each router on the switch. Now, with Comcast, they only get one IP address, meaning there has to be a main router before the subnet routers. Luckily, the cable modem has a built-in router, which I would like to connect to each company's router, and still have DHCP enabled on all accounts. Question: What do I need to do to the subnet routers to keep them separate from each other, but still allow internet access from the main router. I would love to say "I tried this", and give you links, but everything I find on the internet only mentions daisy-chaining routers with DCHP disabled.

  Read the article

• very slow internet with Linksys WRT54GL only in wireless mode (wired is OK)

  - by gojira

  I bought a new Cisco Linksys WRT54GL router to connect my laptop (running Windows 7) to the internet. I installed Tomato 1.28 firmware on the router. When I connect the laptop to the router via ethernet cable, everything is fine and I get extremely fast up- and download speeds. When I connect wirelesssly however, websites load extremely slow - it takes dozens of seconds to load a website! <-- This is my question, how can I fix the wireless speed issue? Gmail for example is unusable this way. I tried speedtest.net, but this always fails in the upload part of the test so I can't even test the bandwidth (could the fact that it fails in the upload part, not the download part, be an indication what the problem is?!). I have isolated the problem a bit, I am convinced it has to do either with the router itself, the router settings, or the settings of the wireless connection in Win 7. Because previously, I was using another router by Buffalo and I had no problems whatsoever. I have tried to reproduce the settings from the Bufallo router as closely as possible on the Linksys router (same channel, same encryption etc). The download speed problem only occurs with the Linksys router, and only in wireless mode! When I exchange the Linksys router with the Buffalo router I have here for testing, the wireless speed is up to normal again. Also, before I had installed the Tomato firmware I had exactly the same problem, so it has nothing to do with the firmware itself. Notes & things I already tried: Changing the channel: does not seem to affect anything, I am also on the same channel (10) which I was previously on when I had a Buffalo router. QoS is off. Ping to the router itself is OK, ~ 1 ms. Some current settings of the linksys router: WAN / Internet Type: DHCP Wirelesss Mode: Access Point B/G Mode: Mixed Broadcast: check Channel: 10 - 2.457 GHz Security: WPA2 Personal Encryption: AES

  Read the article

• Limit user to one CPU core in windows 7

  - by Dean Ward

  I let my family members use my pc over rdp to play their flash-based games as their laptops overheat if they use them directly. I have it setup so I can use the pc at the same time as them. The pc has a quad core cpu and I would like to be able to assign one of those cores to the user logged in via RDP so that the other 3 cores are left alone. Is this possible? They login via a specific user account setup for the purpose. Thanks for any advice!

  Read the article

• Weblogic Threads Usage

  - by Hila

  I have an application deployed on WebLogic 10.3, which exhibits a strange behavior. I am running a constant (not too high) load on my application (20 concurrent users, running a light activity). The response time is reasonable (well below 100ms after the application stabilizes) Memory consumption seems fine (My application creates a lot of short-living objects, but they are garbaged collected so the overall memory consumption stays under 500 mb). Threads stats seem healthy as well: And yet, after I leave my test running for a while, more and more execute threads ("[ACTIVE] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'") are created, until eventually the application crashes: This test hasn't been running for a long time (All the new threads that you don't see in the first screenshot were created while I was writing this question), and I've seen much more threads being created. Any idea why these threads are being created?

  Read the article

< Previous Page | 95 96 97 98 99 100 101 102 103 104 105 106  | Next Page >